ZAGG ZKUNI Wireless Keyboard User Manual USERS MANUAL
ZAGG Inc. Wireless Keyboard USERS MANUAL
ZAGG >
USERS MANUAL
UNIVERSAL
NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT:
www.ZAGG.com/faq
*WARRANTY REGISTRATION
Your ZAGGkeys™ Universal comes with a one-year manufacturer’s warranty. In order to activate the
warranty, you must register your Universal as well as keep your purchase receipt. If you purchased
your ZAGGkeys Universal from ZAGG.com, ZAGG® has already registered it and has a copy of your
proof of purchase.
If your device does not respond to your Universal there may be a simple
explanation such as a dead battery or an unsuccessful pairing. Please use
the following to help troubleshoot your situation. If none of the following
solve your issue, then please contact ZAGG Customer Service and one of
our trained professionals will be happy to assist you.
1. Restart your device and re-pair your Universal.
2. Turn your Universal o and back on. You should see the LED status lights
illuminate briefly, if not, charge your Universal.
3. After charging, turn your Universal on. If the LED status lights do not
illuminate, and your keyboard doesn’t operate correctly, please contact
ZAGG’s Customer Support.
4. Forget and re-pair your Universal. Review your device’s instructions for
how to properly forget a device, and then follow the directions under
Pairing Your Universal.
5. If your device gives you an error message during pairing, repeat the
pairing process.
8. If you still can’t get your Universal to pair, it is possible your device needs
to have its software updated. Consult your device’s instructions for
directions on how to update its software.
9. After your update is complete, repeat the troubleshooting/pairing
process*.
* If you continually receive the same error message during pairing, or the above steps don’t work,
please contact ZAGG’s Customer Support for assistance.
TROUBLESHOOTING
FOR MORE HELP PLEASE SEE OUR FAQ AT: www.ZAGG.com/faq
To reach a trained customer service representative, please use one of the following:
ZAGG.com/support/contact.php | questions@zagg.com
1-800-700-ZAGG [9244] | 00-1-801-839-3906 for international customers
For unparalleled scratch protection for your device, we recommend ZAGG’s invisibleSHIELD®.
©2005 - 2013 ZAGG Inc. All Rights Reserved.
PATENT PENDING | NASDAQ: ZAGG | MADE IN CHINA
ZAGG®, invisibleSHIELD®, and ZAGGkeys™ Universal are trademarks or registered trademarks of ZAGG Inc.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1: This device may not cause harmful interference, and 2: This device must accept any interference
received, including interference that may cause undesired operation
FOLD
FRONT
BACK
Congratulations on being the proud new owner of the most versatile
Bluetooth® keyboard available. The ZAGGkeys Universal pairs with any of
your Android, Windows, or iOS devices*. Read the following instructions in
their entirely as some functions of the Universal work dierently depending
on the device you are using. Keep these instructions for future reference.
*Not all functions work, or work the same, across all operating systems and/or across
all devices within an operating system. Please refer to the device specific tables under
Special Function Keys for information on specific system key functions.
CONGRATULATIONS
Your ZAGGkeys Universal is ready to go right out of the box. Simply follow
these steps to begin enjoying the Universal with any of your devices.
1. Remove the Universal from its packaging.
2. Slide the Universal Bluetooth®
keyboard out of its protective cover by
securing the cover and then sliding out
the keyboard by pushing it to one side
or the other.
3. Place the Universal keyboard in an
ideal typing location.
5. Place the stand so that the now
exposed trough sits on a flat surface.
6. Set your device in the trough (you can
choose portrait or landscape mode)
7. Turn on your ZAGGkeys Universal
using the power switch on the right
hand side.
8. Select your operating system using
the selector switch on the underside of
the Universal keyboard.
9. Pair the Universal with your device
(for information on pairing, see Pairing
Your Universal).
10. Enjoy the ease and comfort of your
Universal.
QUICK START
WINDOWS DEVICE
4. How to open the built-in
device stand.
•Hold the protective cover in one
hand with your thumb on the ZAGG
logo that appears on the outside of
the cover.
•Place your other hand on the
opposite side of the cover with your
finger/s inside the cover on the edge
of the hinged stand.
•Press outward with your fingers so
that the hinged stand moves toward
your thumb.
N/A Alt
Home Lock N/A N/A N/A Cut Copy Paste Track Back Play/Pause
Track
Forward Mute Vol Down Vol Up
Function Launches the
menu on the
right side of
the screen
Forward
Delete
ctrl +
beginning
of line
ctrl +
end of line
ctrl +
top of page
ctrl +
bottom
of page
Functions in the lower right hand corner are accessed by pressing Fn + the key.
FOLD
INSIDE BACK
INSIDE FRONT
Your Universal features a powerful lithium-ion battery that lasts for up to
three months of normal use between charges. It comes with a charging
cable you can use to charge your keyboard quickly and conveniently. To
charge your Universal, simply follow these steps:
1. Plug the micro USB connector into the charging port.
2. Plug the regular USB connector into any USB outlet (including a
ZAGGsparq™, your computer, your device, etc.).
3. A green LED light will illuminate to indicate the Universal is charging.
Wait until this light turns o, indicating a full charge. It usually takes 2-4
hours to completely charge your Universal.
4. Remove the Micro USB connector and enjoy your Universal for up to
three months before you need to charge it again.
CHARGING APPLE DEVICE
As mentioned, the Universal features a powerful, rechargeable battery that
lasts up to three months between charges*. To check your Universal’s
remaining battery power, simply hold down the function (fn) key and press
the battery key (also the CTRL key). The LED indicator will flash one of
three ways.
1. Three green flashes indicate 50% or more battery life remaining.
2. Three yellow flashes indicate between 25%-50% battery life remaining.
3. Three red flashes indicate less than 25% battery life remaining. When
your Universal reaches critical battery level the red light will flash once
every five minutes.
To help preserve battery life, your Universal will enter sleep mode if left on
and not used for several minutes. To wake your Universal, simply press any
key. The Universal’s battery has no memory and therefore may be charged
whenever you wish. For optimal battery life, we recommend turning your
Universal o when idle for a prolonged time.
BATTERY LIFE
Your Universal has a variety of special function keys. However, not all keys
work with each operating system*. Please refer to the diagrams below to
learn more about the special function keys that work with your device.
*Not all functions work, or work the same, across all operating systems and/or across all devices
within an operating system. Please refer to the device specific tables for information on specific
system key functions.
SPECIAL FUNCTION KEYS
Command Alt\Option
Home Lock Cut Copy Paste Track Back Play/Pause
Track
Forward Mute Vol Down Vol Up
Function
Functions in the lower right hand corner are accessed by pressing Fn + the key.
Siri Photos
Hide/Expose
Keyboard
CHARGING PORT
Forward
Delete
FOLD
PAGE 3
PAGE 2
The Universal comes ready to go with about 80% of the battery charged. To
turn it on, simply slide the power button to the ON position, you’ll see a
green dot. A blue LED light will flash on the CAPS LOCK key and a green
LED will flash on the fn key. To turn your Universal o, simply switch the
power button to the OFF position, you’ll see a red dot.
Each time you switch devices, especially one with dierent operating
systems, you’ll need to pair your Universal. To pair it, make sure it is turned
on and then find your operating system below and follow the directions.
FOR ANDROID
1. Select SETTINGS > WIRELESS & NETWORKS > BLUETOOTH > ON
2. Press the Pair button on your Universal keyboard. A blue LED light will
flash until your device and the Universal are paired.
3. Your device should find the Universal and then list it as an available
device. If it doesn’t, simply touch Search for devices and it will scan again.
4. When the Universal shows in your list of available devices, touch it to
complete pairing.
FOR iOS
1. On your device select: SETTINGS > GENERAL > BLUETOOTH > ON.
2. Press the Pair button on your Universal keyboard. A blue LED light will
flash until your device and the Universal are paired.
3. Your device will display “ZAGGkeys Universal” as an available device.
Select this option to complete pairing.
FOR WINDOWS
1. Press the Pair button on your Universal keyboard. A blue LED light will
flash until your device and the Universal are paired.
2. If you have it, touch the Bluetooth symbol in your system tray* and select
Add a Device. If you don’t have the Bluetooth symbol available, simply
touch the Start button and then choose Devices. From this menu you can
choose Add a Device.
3. The Universal should show up as an available device; select it and touch
Next to complete pairing.
*Windows 8 users can use the Settings charm.
POWERING ON AND OFF
PAIRING YOUR UNIVERSAL
ANDROID DEVICE
N/A Alt
Home Lock N/A N/A Cut Copy Paste Track Back Play/Pause
Track
Forward Mute Vol Down Vol Up
Function Menu Back
Works with
some devices
Functions in the lower right hand corner are accessed by pressing Fn + the key.
PAIR BUTTON
POWER BUTTON
FOLD
PAGE 1
PAGE 4
Information to Users
According to the FCC Part 15.19 and 15.21 rules, for this EUT, the instructions or operation
manual furnished the user shall include the following or similar statement, placed in a prominent
location in the text of the manual:
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.