ZAVIO 5117F Wireless IP CAM User Manual Hardware

ZAVIO Inc. Wireless IP CAM Hardware

user manual

Download: ZAVIO 5117F Wireless IP CAM User Manual Hardware
Mirror Download [FCC.gov]ZAVIO 5117F Wireless IP CAM User Manual Hardware
Document ID1447424
Application ID3hFGc/3wUbweHWgJ4O0ArQ==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize381.04kB (4763056 bits)
Date Submitted2011-04-13 00:00:00
Date Available2011-04-13 00:00:00
Creation Date2010-09-23 19:30:10
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2010-09-23 19:32:57
Document TitleHardware User Manual
Document CreatorAcrobat PDFMaker 9.0 Word 版
Document Author: admin

F7110 / F7115 User Manual
F7110/ F7115
F7110 / F7115 User Manual
Contents
CHAPTER 1. SAFETY INSTRUCTION ....................................................................................................................... 1
CHAPTER 2. MINIMUM SYSTEM REQUIREMENT &........................................................................................... 3
PRODUCT FEATURE..................................................................................................................................................... 3
2.1 SYSTEM REQUIREMENT .......................................................................................................................................... 3
2.2 PRODUCT FEATURES ............................................................................................................................................... 4
CHAPTER 3. USING IP CAMERA VIA WEB BROWSER ........................................................................................ 5
3.1WINDOWS WEB BROWSER....................................................................................................................................... 5
3.2 MAC WEB BROWSER............................................................................................................................................... 5
CHAPTER 4. SETTING UP WIRELESS CONFIGURATION (ONLY FOR F7115 ) ............................................... 8
CHAPTER 5. OPERATING IP CAMERA VIA MOBILE PHONE ........................................................................... 9
5.1 MOBILE PHONE VIEWING ..................................................................................................................................... 10
5.2 USING IP CAMERA VIA IPHONE ............................................................................................................................. 11
CHAPTER 6. MSN MESSENGER............................................................................................................................... 11
CHAPTER 7. CONFIGURATION OF MAIN MENU................................................................................................ 15
Full screen ................................................................................................................................................................ 1
Snapshot ................................................................................................................................................................... 1
7.1 LIVE VIEW ............................................................................................................................................................. 15
computer computer. ................................................................................................................................................. 16
7.2 SETTING ................................................................................................................................................................. 18
7.3 CLIENT SETTING ................................................................................................................................................... 18
7.3.3 Protocol.......................................................................................................................................................... 19
7.4 IMAGE SETUP......................................................................................................................................................... 20
7.5 PT CONTROL ......................................................................................................................................................... 20
CHAPTER 8. SETTING-BASIC................................................................................................................................... 22
8.1 SYSTEM .................................................................................................................................................................. 22
8.1.1 Information.................................................................................................................................................... 22
8.1.2 Date / Time..................................................................................................................................................... 23
8.1.3 Initialize ......................................................................................................................................................... 24
8.1.4 Language ....................................................................................................................................................... 25
8.2 CAMERA ................................................................................................................................................................. 26
8.2.1 General .......................................................................................................................................................... 26
8.2.2 H.264.............................................................................................................................................................. 28
8.2.3 MPEG-4......................................................................................................................................................... 29
8.2.4 MJPEG .......................................................................................................................................................... 31
8.2.5 3GPP.............................................................................................................................................................. 32
8.2.6 Advanced........................................................................................................................................................ 33
8.2.7 PLAYBACK ................................................................................................................................................... 35
8.3 NETWORK .............................................................................................................................................................. 36
8.3.1 Information.................................................................................................................................................... 36
8.3.2 PPPoE (Point-to-Point Protocol over Ethernet)........................................................................................... 37
8.3.3 DDNS (Dynamic DNS) ................................................................................................................................. 39
8.3.4 UPnP (Universal Plug and Play) .................................................................................................................. 43
8.3.5 Bonjour.......................................................................................................................................................... 43
8.3.6 IP Notification ............................................................................................................................................... 45
8.3.7 Wireless (Only for F7115) ............................................................................................................................. 46
8.3.8 WPS ............................................................................................................................................................... 48
8.3.9 Messenger...................................................................................................................................................... 49
8.4 SECURITY ............................................................................................................................................................... 51
8.4.1 Account .......................................................................................................................................................... 51
8.4.2 HTTPS ........................................................................................................................................................... 52
F7110 / F7115 User Manual
8.4.3 IP Filter ......................................................................................................................................................... 53
CHAPTER 9. SETTING-ADVANCED ........................................................................................................................ 53
9.1 PTZ CONTROL ...................................................................................................................................................... 54
9.1.1 Setting ............................................................................................................................................................ 54
9.2 PRESET POSITION .................................................................................................................................................. 54
9.2.1 Setting ............................................................................................................................................................ 55
9.2.2 Alarm Sending............................................................................................................................................... 56
9.3 PATROL .................................................................................................................................................................. 57
9.4 FTP CLIENT ........................................................................................................................................................... 58
9.4.1 General .......................................................................................................................................................... 59
9.4.2 Alarm sending ............................................................................................................................................... 60
9.4.3 Periodical sending ......................................................................................................................................... 62
9.5 SMTP .................................................................................................................................................................... 63
9.5.1 General .......................................................................................................................................................... 63
9.5.2 Alarm sending................................................................................................................................................ 65
9.6 NETWORK STORAGE .............................................................................................................................................. 68
9.6.1 General .......................................................................................................................................................... 68
9.6.2 Alarm sending................................................................................................................................................ 69
9.6.3 Periodical recording ...................................................................................................................................... 71
9.7 MEMORY CARD ..................................................................................................................................................... 72
9.7.1 General .......................................................................................................................................................... 72
9.7.2 Alarm sending................................................................................................................................................ 74
9.7.3 Periodical recording ...................................................................................................................................... 75
9.7.3 Backup ........................................................................................................................................................... 76
9.8 HTTP EVENT ......................................................................................................................................................... 77
9.7.1 General .......................................................................................................................................................... 77
9.7.2 Alarm sending................................................................................................................................................ 78
9.8 ALARM OUTPUT .................................................................................................................................................... 82
9.9 SCHEDULE.............................................................................................................................................................. 84
9.10 ALARM INPUT ...................................................................................................................................................... 84
9.11 ALARM BUFFER ................................................................................................................................................... 85
9.12 MOTION DETECTION ........................................................................................................................................... 87
9.13 AUDIO DETECTION .............................................................................................................................................. 88
9.14 SYSTEM LOG ........................................................................................................................................................ 89
CHAPTER 10. APPENDIX ........................................................................................................................................... 90
A. FRAME-RATE AND BITRATE TABLE – HELP TO SET IPCAMERA WITH YOUR NETWORK ENVIRONMENT TO ACCESS
INTERNET...................................................................................................................................................................... 90
A.1 Mega Mode ...................................................................................................................................................... 90
A.2 VGA Mode........................................................................................................................................................ 93
B. STORAGE REQUIREMENT TABLE - HELP TO SET RECORDING STORAGE SYSTEM.................................................... 96
B.1 Mega Mode ...................................................................................................................................................... 96
B.2 VGA Mode........................................................................................................................................................ 98
C. SYSTEM REQUIREMENT – HELP TO SETUP SYSTEM .............................................................................................. 100
C.1. 16 Channel IPCamera with CIF Performance............................................................................................ 100
C.2. 16 Channel IPCamera with D1 Performance.............................................................................................. 100
EUROPE – EU DECLARATION OF CONFORMITY ............................................................................................ 101
FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT .......................................... 103
ii
F7110 / F7115 User Manual
User Manual
Chapter 1. Safety Instruction
 Before you use this product
This product has been designed with safety in mind. However, the electrical products can cause
fires which may lead to serious body injury if not used properly. To avoid such accidents, be sure to
heed the following.
 Legal Caution
Video and audio surveillance can be forbidden by laws that vary from country to country. Check the
laws in your local region before using this product for surveillance purposes.
 Don't open the housing of the product
Don't try to open the housing or remove the covers which may expose yourself to dangerous voltage
or other hazards.
 Don't use the accessories not recommend by the manufacturer
 Heed the safety precautions
Be sure to follow the general safety precautions and the “Operation Notice.”
 Operation Notice - Operating or storage location
Avoid operating or storing the camera in the following locations:
 Extremely hot or cold places
(Operating temperature: 0 °C to + 50 °C [32 °F to 122°F] )
 Exposed to direct sunlight for a long time, or close to heating equipment (e.g., near heaters)
 Close to water (e.g.,near a bathtub, kitchen sink, laundry tub)
 Close to sources of strong magnetism
 Close to sources of powerful electromagnetic radiation, such as radios or TV transmitters
 Locations subject to strong vibration or shock
 In case of a breakdown
In case of system breakdown, discontinue use and contact your authorized dealer.
Safety Instruction
F7110 / F7115 User Manual
 In case of abnormal operation
 If the unit emits smoke or an unusual smell,
 If water or other foreign objects enter the cabinet, or
 If you drop the unit or damage the cabinet:1 Disconnect the cable and the connecting cables. 2
Contact your authorized dealer or the store where you purchased the product.
 Transportation
When transporting the camera, repack it as originally packed at the factory or in materials of equal
quality.
 Ventilation
To prevent heat buildup, do not block air circulation around the device.
 Cleaning
 Use a soft, dry cloth to clean the external surfaces of the device. Stubborn stains can be
removed using a soft cloth dampened with a small quantity of detergent solution, then wipe dry.
 Do not use volatile solvents such as alcohol, benzene or thinners as they may damage the
surface.
Safety Instruction
F7110 / F7115 User Manual
Chapter 2. Minimum System Requirement &
Product Feature
2.1 System Requirement
For normal operation and viewing of the network camera, it’s recommended that your
system meet these minimum requirements for proper operation:
Item
Requirements
CPU
Pentium 4 1.8GHz (or equivalent AMD)
Graphic Card
64 MB RAM graphic cards(or equivalent on-board graphic cards)
RAM
512 MB
Operating
System
Windows 98, Windows ME (Please see Note)
Web Browser
Internet Explore 6 or later
Windows2000, 2003, XP, Vista, Mac OS X Leopard
Note:
1. If using Windows 98 or Windows ME, please install IP Installer before using WEB UI to
ensure the system runs normally.
2. If not able to view the recorded video file, please install Xvid codec while installing
Intelligent IP Installer. (For Windows 98, ME or 2000 server, the codec might not work
properly. Please download Xvid codec 1.0 from the internet.)
3. Please keep updating the latest Windows software and service package. (Ex: Net
Framework, Windows Media Player, Enhance ActiveX Security)
Minimum System Requirement
& Product Feature
F7110 / F7115 User Manual
2.2 Product Features
These easy-to-follow instructions make setup and operation quick and simple, so you’ll also soon
be enjoying the benefits of these PRODUCT FEATURES:
Resolutions
Screen Resolution
Compressing format
Frame Rate
Image settings
Image snapshot
Video Recording
Full Screen Viewing
Digital Zoom
Audio
Instant Messenger
Mobile Phone Live
View
Alarm Sending
Security
Alarm Buffer
Supported protocols
Simultaneous
Connection
Operating conditions
Lens
Video Output
Local Storage
I/O
Audio Output
Alarm Input
Power
Ethernet
Wireless
SYSTEM
H.264 / MPEG-4 / Motion JPEG:
4 resolutions from 1280x1024 to 320x240 via API and
configuration web page
Higher than 1024 * 720 pixels
H.264 / MPEG-4 / Motion JPEG
Up to 15 fps at 1280x1024
Up to 30 fps at 640x480
Rotation: Mirror, Flip, Mirror Flip
Brightness / Contrast / Saturation
Overlay capabilities: time, date, text and privacy image
Yes
Yes
Yes
10x digital
Two-way (full / half duplex) with built-in microphone
Audio compression: G.711 μ law, a law, and AMR
Support MSN Live View
Through 2.5 WAP
FTP Client / SMTP / Network Storage / HTTP Event
Password Protection / HTTPS encryption / IP Filter
Recording image and audio file pre-and-post disconnection up
to 5 sec.
Bonjour, TCP/IP, DHCP, PPPoE, ARP, ICMP, FTP, SMTP,
DNS, NTP, UPnP, RTSP, RTP, HTTP, TCP, UDP, 3GPP/ISMA
RTSP
Up to 10 users
0℃~ 50℃ (32℉ ~ 122℉)
HARDWARE
Changeable CS-mount lens (support Auto Iris)
RCA type with BNC adapter
Support SD/SDHC card
2 alarm I/O and 1 RS-485
12V DC, 1A, Max 5W
NETWORK
10 / 100 Base T
IEEE 802.11b/g/n (for F7115)
Minimum System Requirement
& Product Feature
F7110 / F7115 User Manual
Chapter 3. Using IP Camera via Web Browser
3.1Windows Web Browser
1. Open your web browser, and enter the IP address or host name of the IP camera in the
Location / Address field of your browser.
Note : If you only want to view the video without accessing Setting screen, enter
“http:///index2.htm” as your web URL.
2. Use the default account “admin” and default password “admin”.
Note : The default user name “admin” and the password are set at the factory for the
administrator. You can change them in the Account Menu. (Please check “Setting →
Basic → Security → Account”)
3. The monitor image will be displayed in your browser. In the far left side of main
configuration are Setting, Client Setting, and Image Setup and PT control. For more details,
you can check Chapter 7.2、Chapter 7.3、Chapter 7.4 and Chapter 7.5.
Using IP Camera via
Web Browser
F7110 / F7115 User Manual
3.2 Mac Web Browser
1. Click the Safari icon, and enter the IP address of the IP camera in the Location / Address
field of your browser.
Note : If you only want to view the video without Setting screen
“http:///index2.htm”
as your web URL.
2. Enter the default account “admin” and default password “admin”.
Note :
The default user name “admin” and the password are set at the factory for the
administrator. You can change them in the Account Menu (Please check “Setting →
Basic → Security → Account”)
Using IP Camera via
Web Browser
F7110 / F7115 User Manual
3. The monitor image will be displayed in your browser. In the far left side of main
configuration are Setting, Client Setting, and Image Setup and PT control. For more details,
you can check Chapter 7.2、Chapter 7.3、Chapter 7.4 and Chapter 7.5.
Using IP Camera via
Web Browser
F7110 / F7115 User Manual
Chapter 4. Setting up Wireless Configuration
(Only for F7115 )
The wireless network has to be set up by using cable network connection. After setting the
camera correctly, the wireless function can work without cable network connection. Please
follow the setting process below step by step:
1. Connect IP Camera with Ethernet connection.
2.Go to “Setting → Basic → Network → Wireless,” choose option “On”. You will see
the wireless Setting screen.
3. Then click “Refresh”. All access points (AP) around you will show up.
4. Select the AP you wish to connect.
5. Enter password at active transmit key if you need. If you don't know the setting of the
wireless AP, please ask your network administrator.
Setting up Wireless
Configuration
F7110 / F7115 User Manual
6. Choose the option of Obtain an IP address automatically (DHCP) and Obtain DNS server
address automatically.
7. Otherwise, Choose Use the following IP address and Use the following DNS sever address.
 Use the following IP address: Select this when the fixed IP address is set.
IP address: Enter the IP address of the device.
Subnet mask: Enter the subnet mask.
Default gateway: Enter the default gateway.
 Use the following DNS server address: Select this when you set the fixed address as the
IP address of DNS server.
Primary DNS server: Enter the IP address of the primary DNS server.
Secondary DNS server: Enter the IP address of the secondary DNS server, if
necessary.
Setting up Wireless
Configuration
F7110 / F7115 User Manual
Chapter 5. Operating IP Camera via Mobile Phone
5.1 Mobile Phone Viewing
5.1.1 3G Mobile Phone Streaming Viewing
For 3G mobile phone viewing, type “ rtsp://:/video.3gp ” into your 3G
Streaming Link.  is the Public IP address of your IP camera;  is the RTSP port
of your IP camera (Default value is 554.) Example: rtsp://100.10.10.1:554/video.3gp
Note: You can also use RTSP clients (RealPlayer, VLC, QuickTime Player…etc.) to
view RTSP streaming, just type in “rtsp://:/video.3gp” as the Player URL
5.1.2 2.5G Mobile Phone WAP Viewing
For 2.5G mobile phone viewing, type “http:///mobile.wml ” into your 2.5G WAP
Browser.  is the Public IP address of your IP camera.
5.1.3 2.5G Mobile Phone Browser Viewing
For 2.5G mobile phone viewing, type “http:///mobile.htm ” into your 2.5G Web
Browser.  is the Public IP address of your IP camera.
Using IP Camera
via Mobile Phone
10
F7110 / F7115 User Manual
5.2 Using IP Camera via iPhone
You can use ZAVIO Web User Interface via iPhone. Please follow the setting process below.
Then you can use ZAVIO Web UI via iPhone.
2. Type IP address in your web link.
1. Select Safari function
3. Type name and password.
Default value is admin / admin.
Then click Login In
4. The ZAVIO User Interface and
live image will show up in the
middle of screen.
Note: The image is continuous snapshots, not
video. Thus, live image can’t be recorded
here.
Using IP Camera
via Mobile Phone
11
F7110 / F7115 User Manual
Chapter 6. MSN Messenger
Please follow the following steps to set up the Messenger function.
1. Download free MSN software and create a new MSN account (Camera at home) for Microsoft
Live Messenger.
2.Go to “Setting→Basic→Network→Messenger,” set the Messenger to “ON” . Then, login in new
account and password (Camera at home).
3. If your router has firewall function, you have to set the Port Range on this setting page in
accordance with the one of firewall.
4. Choose the Video Mode, decide the live view image of messenger received from Computer View
(MPEG-4) or Mobile View (3GPP).
5. Choose “On” at the option of IP Notification. If this feature switches On, camera will send IP
notification to the users who are allowed.
6. Choose “On” at the option of Privacy. If you can choose “On” at the privacy option, you can set
an allow list.
7. Use your account to login in the Messenger software. Then, add the new MSN account (Camera
at home )
8. The Camera at home will show up with its Public IP and Private IP if the option of IP
Notification is “On”. ( You can enter “Ping” to show up with Public IP and Private IP. )
9. Click on the small camera icon
Then, choose “View a new contact's
webcam”.
MSN Messenger
12
F7110 / F7115 User Manual
10. The IP Camera will accept your
invitation; the live video will show up in the
right screen after few seconds.
11. Click Action button and choose Start
Control Panel to use control panel.
12. The dialog box will show up with “This
application is not part if Window Live
Message…….” Tick the box of “Don’t
show me this again” and click OK.
MSN Messenger
13. The IP Camera will accept your invitation
to start Control Panel.
13
F7110 / F7115 User Manual
15. You can click paint palette icon
showing up with tool bar to set up image. Then,
you can use the tool bar to optimize video
14. You can click Camera icon
to
snapshot then the picture will send to you
immediately.
Brightness
, Contrast
and Sharpness
, Saturation
After the adjustment of all
to make
setting, you can still click
the setting back to the original setting.
16. You can click joystick icon
showing
up with arrows of different directions. You can
click the arrow button of direction to do PT
MSN Messenger
14
F7110 / F7115 User Manual
Chapter 7. Configuration of Main Menu
In the left side of main configuration are Setting, Client setting, Image setting and PT control
(appear only when PT/PTZ control enabled). For more details, please check Chapter 7.2、Chapter
7.3、Chapter 7.4.、Chapter 7.5.
In the right side, you can control Live View in your main Browser. The functions include
Snapshot, Open digital zoom, Audio, and Video Play.
Full screen
Snapshot
Open digital zoom
Audio Play
Video Play
15
Configuration of
Main Menu
F7110 / F7115 User Manual
7.1 Live View
7.1.1 Snapshot
You can capture a still image shot by clicking the camera icon and save it in the operating
computer.
Symbols
Meaning
a snapshot window appears after clicking the icon
save the picture captured by snapshot into your computer
coSave
mputer computer.
Close
Return to the view screen
full screen
7.1.2 Digital zoom in / out the image via the monitor
window

Click

Pull the
to display the digital zoom in window.
to adjust the digital zoom range, and it will be
showed on the above window.

Use the left click of your mouse to move
Configuration of
Main Menu
to anywhere in the window area.
16
F7110 / F7115 User Manual
7.1.3 Video play buttons
Symbols
Meaning
Pause the current video
Play the video
Stop the current video
Record the current video
Note: Concerning the recording storage requirement of your hard disk, please refer to
the CHAPTER 10. APPENDIX / B. Storage Requirement Table.
7.1.4 Audio buttons
Symbols
Meaning
Note
mean the speakers of your computer are turned
on to transmit the sounds from the connected IP
camera(s)
Speakers turned on
Speakers turned off
mean the speakers of your computer are turned
off to transmit the sounds from the connected IP
camera(s)
mean you can broadcast to the connected IP
camera(s) via the Ethernet using your
microphone
Mute off
Configuration of
Main Menu
Mute on
mean you can’t broadcast to the connected IP
camera(s) via the Ethernet using your
microphone
Volume control bar
mean you can adjust the sound volume by
the control bar
17
F7110 / F7115 User Manual
7.2 Setting
This function is only for the Administrator. Click “Setting” on the home page of web user
interface to get into the Basic and Advanced settings menu.
Click Basic folder, there are sub-folders including System, Camera, Network, and Security.
Fore more information, you can see Chapter 8.1、Chapter 8.2、Chapter 8.3 and Chapter 8.4.
Click Advanced folder, there are sub-folders including PT control, Preset position, Patrol,
FTP Client, SMTP, Network storage, HTTP event, Alarm output, Schedule, Alarm input,
Alarm buffer, Motion Detection, Audio Detection, and System Log. Fore more information,
please see Chapter 9.
Configuration of
Main Menu
18
F7110 / F7115 User Manual
7.3 Client Setting
This function is only for the client. Click this button to control Mode, View Size, Protocol,
and Video Buffer.
7.3.1 Mode
Click the pull-down box to choose video compression mode of LIVE VIEW among H.264,
MPEG-4, MJPEG and JPG.
Note: As long as the operating system not able to afford loading under H.264 mode, please
downgrade the mode to MPEG-4 or MJPEG.
7.3.2 View Size
Select the desired view size of image resolution among 1/4X, 1/2X, and 1X.
7.3.3 Protocol
Select the transferring protocol among TCP, UDP, and HTTP.
7.3.4 Video Buffer
Turn the Video Buffer function On / Off. The Video Buffer function makes the streaming
more smoothly in unsteady network environment, but might cause a little delay in live
viewing.
Configuration of
Main Menu
19
F7110 / F7115 User Manual
7.4 Image Setup
The tool bar can be adjusted to optimize video Brightness, Contrast, Saturation
Sharpness and Exposure.
7.4.1 Brightness
The value range is 0~99. The higher value the brightness is, the brighter the image is.
7.4.2 Contrast
The value range is 0~99. The contrast is a measure of a display system, defined as the ratio of
white to black that the system is capable of producing. The higher value the contrast is, the
more delicate of color you can have.
7.4.3 Saturation
The value range is 0~99. The saturation of a color is determined by a combination of light
intensity and how much it is distributed across the spectrum of different wavelengths. The
higher value the saturation is, the more colorful the image will be.
7.4.4 Sharpness
The value range is 0~99. It applies image processing techniques to adjust the sharpness of live
view. However, higher the value is, more the noise is.
7.4.4 Exposure
The value range is 0~99. A value is given to all combinations of camera shutter speed, aperture
and gain. The higher value the brightness is, the more exposure the image is.
6.4.5 Default
After the adjustment of all setting, you can still click Default to make the setting back to the
original setting.
Configuration of
Main Menu
20
F7110 / F7115 User Manual
7.5 PT Control
7.5.1 Pan / Tilt / Home control buttons
Click the arrow button of the direction you want the IP camera to move.
7.5.2 Other camera control functions
Preset: Move the camera toward the preset direction.
Patrol: Before you start this function, you need to specify Guard tour settings in the Setting
Menu under Advanced / Patrol setting.
Configuration of
Main Menu
21
F7110 / F7115 User Manual
Chapter 8. Setting-Basic
Click the Basic folder to display the sub folders including System, Camera, Network, and
Security.
8.1 System
Click the folder of System to display the sub-folders including Information, Date / Time,
Initialize, and Language.
8.1.1 Information
The Information screen provides the product factory information which includes Product
Name, Firmware Version.
Setting-Basic
Information
22
F7110 / F7115 User Manual
8.1.2 Date / Time
The Date/ Time screen displays all options of time setting.
 Current date / time: This displays the current date and time of this IP Camera.
 PC clock: This displays the date and time of the monitoring PC clock.
 Date / Time format: You can click the pull down box to select different time display
formats.
Note: If you would like the Date / Time information shows on the Live View screen,
please check “Setting → Basic → Camera → General → Overlay → Text overlay →
Date / Time ” to execute the setting.
 Adjust: You can select one of those four adjusting modes for your IP Camera.
Keep current setting: Select this mode to keep the current date and time of this IP
Camera.
Synchronize: Select this mode to keep the date and time of this IP Camera is the same
as the monitoring PC.
Manual setting: Select this mode to adjust manually the date and time of this IP
Camera.
Synchronize with NTP: Specify the NTP server name and the Refresh Interval to
synchronize the date and time of this IP Camera with those of the time server, known
as the NTP server.
Setting-Basic
Date/Time
23
F7110 / F7115 User Manual
 Time Zone: Select the Time Zone format of Greenwich Mean Time among different
cities. The time display will be the same as the current date / time option.
 Daylight Saving Time: There are two modes to choose for setting up daylight saving
time.
By Date: Set the start and end time by select month, day, hour, and minute.
By Week Number: Set the start and end time by select month, week, hour, and
minute.
Note: The NTP server (Network Time Protocol) is the time server which is an Internet
standard protocol built on the top of TCP / IP. This assures accurate synchronization to
the millisecond of computer clock times in a network of computers.
8.1.3 Initialize
 Reboot: Click this button to reboot this IP Camera. A confirmation dialogue will appear
and then click “OK” to execute. It takes one minute to complete the reboot process.
 Factory Default: Click this button to recover this IP Camera to the factory default setting.
A confirmation dialogue will appear and then click “OK” to execute. The network indicator
on this IP Camera will start to blink. This IP Camera will reboot automatically after
completing adjustments to the default setting. Don't turn off this IP Camera until the device
reboots.
 Backup Setting: You can save the setting data of this IP Camera into a file. Click “Save”
Setting-Basic
Initialize
24
F7110 / F7115 User Manual
and follow the instructions on the browser to save the setting data file to the location you
specified.
 Restore Setting: Download the saved setting data of this IP Camera. Click “Browse” and
select saved file. Click “OK” and this IP Camera is adjusted according to the loaded data
and then restarted.
 Firmware Update: Update the device software. Click “Browse” and select the file for
updating. A confirmation dialogue will appear. Click “OK” to start. This IP Camera will
reboot upon completion.
Note: When updating the firmware version, please use the file specific for the model.
Otherwise, some problems may occur. Unless the updating completed, please don’t
turn off the power or disconnect the network.
8.1.4 Language
 Upload Language Pack: Clicking “Browse” and selecting the file for updating, the
present language display of WEB User Interface could be changed. A confirmation dialogue
will appear. Click “OK”, then the update will be applied immediately. The default language
is “English.”
Setting-Basic
Language
25
F7110 / F7115 User Manual
8.2 Camera
Click the folder of Camera to display the sub folders including General, H.264, MPEG-4,
MJPEG, 3GPP, and Advanced.
8.2.1 General
 RTSP: The default value is 554. If the IP Cameras connected with router and installed
outside are over 2 sets and all of them need support RTSP, please fill some value in the
blank space in the range from 1024 to 65535.
 RTP Unicast streaming: The default value of port range is 5000 ~ 7999 and can be
changed from 1024 to 65535.
Note: Under Unicast streaming mode, streaming video is delivered from the camera to
a single client device.
 Image Rotated: Select the screen display “flip”, “mirror”, or “flip + mirror.”
 Audio Codec: Select one audio codec among G.711 U-law / G.711 A-law / AMR Audio /
Off.
G.711
U-law : one codec for “Computer Audio”, used in North America & Japan
areas.
G.711 A-law : another codec for “Computer Audio”, used in Europe and the rest of the
world.
AMR Audio: an audio codec of the third generation communication for MOBIL
PHONE. While the option selected, your mobile phone will receive the audio file
26
Setting-Basic
Camera
F7110 / F7115 User Manual
from IP Camera. And you can choose the bit rate from 4.75k to 12.2k. However, the
usage of this codec will cause frame-rate decreasing.
Off: Select Off, audio file won’t be transmitted by IP CAM.
 Audio mode: You can select Full duplex or Half duplex.
Full
duplex: Select it for simultaneous communication in both direction between the
connected administrator and IP CAM. It means both parties can speak and be heard at
the same time.
Half duplex: Select it for communication in both directions, but only one direction at
a time (not simultaneously). It means one party begins receiving a signal, it must wait
for the transmitter to stop transmitting, before replying. Therefore, once one party
speak, he can’t hear any voice from the other party, just like the communication by
radio set.
 Video clip format: Select RECORDING compression format H.264 or MPEG-4.
MPEG-4:
MPEG-4 has the advantage of sending a lower volume of date per time
unit across the network (bit-rate) compared to Motion JPEG and therefore provides a
relatively high image quality at a lower bit-rate (bandwidth usage).
H.264: H.264 provides higher compression rate than MPEG-4. Thus, H.264 can
decrease the bandwidth usage and further apply on 3G. However, H.264 will occupy
more system resources than MPEG-4. As long as the operating system appears
operating difficulties under H.264 format, please change to select MPEG-4.
 Analog Video Output: Analog video output is for fast and easy installation. The default
is On and the mode of live view of Client Setting page will be fixed in H.264. If off chosen,
the string option will appear H.264, MPEG-4, and MJPEG.
 IR Threshold: Select LED light On, Off, or Auto.
On:
Select On will led always work.
Off: Select off will disable led.
Auto: Select Auto will appear two thresholds, Bright and Dark. You can adjust them
for IR Auto-On and Auto-Off respectively. Bright value higher, IR auto-off more
easily in the bright environment will be. Dark value higher, led auto-on more easily in
the dark environment will be. Bright Value is ranges from 0 to 70, and Dark Value is
from 30 to 100. The interval value between both is at least 30. The default value for
B5110 is 50 and 85.
 LED Indicator: Enable/disable LED indicator.
On: Select On to enable LED indicator.
Off: Select off to disable LED indicator.
 Overlay:
Text Overlay: Some information can be showed on the display screen, such as Date /
Time and user-defined text. And the background color can be chosen.
Privacy Mask: A specific area of the video image can be covered.
Setting-Basic
Camera
27
F7110 / F7115 User Manual
8.2.2 H.264
 Viewer authentication:
On: If the viewer authentication is On, the users will be requested to key-in username
and password when using QuickTime Player…etc. to have live viewing.
Off: If the viewer authentication is Off, you can have live viewing on computer by
QuickTime Player…etc. after entering “rtsp://ip:port/video.h264” on the URL column
directly.
 Multicasting streaming (if it’s on):
Multicast Address: The multicast server address will appear automatically.
Video / Audio Port: Specify the transmission port number of the video data, from
1024 to 65535.
Time to Live: Set the maximum TTL that multicast can pass through.
Note: Time To Live option determines the maximum length of time (measure as the
number of network routers that can be passed before data arrives at its destination or
is dropped) within which a multicast packet must reach its destination.
 Image Size: Specify the image size when the network camera transmits. Choose one
among 1280 x 1024, 1280 x 720, 640 x 480, and 320 x 240.
 Frame Rate: Set the frame rate of H.264 image. Choose one value among 2, 3, 4, 5, 7,
10, 15, 20, 25, and 30 fps. The unit “fps” stands for “frames per second”.
Note: The frame rate is up to 15 fps at 1280x1024, and up to 30 fps at 640x480.
However, if you would like choose frame rate over 15 fps, the IMAGE SIZE of
H.264/MPEG-4/MJPEG setting page has to been selected 320x240 or 640x480 at the
same time.
Setting-Basic
Camera
28
F7110 / F7115 User Manual
 Quality:
Auto: The quality and bitrate will be adjusted automatically according to the frame
rate.
Fixed Quality: Select the value of quality among Medium, Good, Delicate and
Excellent.
Fixed Bitrate: Set the bitrate of H.264 image transmission for a line. Select one among
64Kbps, 128Kbps, 256Kbps, 384Kbps, 512Kbps, 768Kbps, 1Mbps, 1.5 Mbps, 2
Mbps, 3 Mbps, 4 Mbps, 5 Mbps, and 6 Mbps.
Note: Concerning how to select the suitable image quality for Fixed Quality or Fixed
Bitrate, please refer to the CHAPTER 10. APPENDIX / A. Frame-rate & Bitrate Table.
 IP interval: It’s the ratio of i-frame & p-frame. Select one among 1, 5, 10, 15, 30, 60, and
120. The ratio smaller, the streaming smoother.
Note: The IP interval value means a ratio of “ P-frame / I-frame “ in a certain section of
frame sequences. The ratio lower, the live view clear. However, live view will lag if the
bandwidth isn’t big enough. In this situation, you have to choose another bigger IP interval
value to solve the problem.
Note: If Video clip format of General Menu, which is for recording compression, is chosen
H.264, the IP interval option will appear “Auto” automatically and can’t select. The limit is
for avoiding damaging the recording quality of 5 seconds temporary-saved video recorded
on FTP server.
8.2.3 MPEG-4
Setting-Basic
Camera
29
F7110 / F7115 User Manual
 Viewer authentication:
On: If the viewer authentication is On, the users will be requested to key-in username
and password when using QuickTime Player…etc. to have live viewing.
Off: If the viewer authentication is Off, you can have live viewing on computer by
QuickTime Player…etc. after entering “rtsp://ip:port/video.mp4” on the URL column
directly.
 Multicasting streaming (if it’s on):
Multicast Address: Specify the multicast server address.
Video / Audio Port: Specify the transmission port number of the video data, from
1024 to 65535.
Time to Live: Set the maximum TTL that multicast can pass through.
Note: Time To Live option determines the maximum length of time (measure as the
number of network routers that can be passed before data arrives at its destination or
is dropped) within which a multicast packet must reach its destination.
 Image Size: Specify the image size when the network camera transmits. Choose one
among 1280 x 1024, 1280 x 720, 640 x 480, and 320 x 240.
 Frame Rate: Set the frame rate of the MPEG-4 image. Choose one from 1, 2, 3, 4, 5, 7,
10, 15, 20, 25, and 30 fps. The unit “fps” stands for “frames per second.”
Note: The frame rate is up to 15 fps at 1280x1024, and up to 30 fps at 640x480.
However, if you would like choose frame rate over 15 fps, the IMAGE SIZE of
H.264/MPEG-4/MJPEG setting page has to been selected 320x240 or 640x480 at the
same time.
 Quality:
Auto: The quality and bitrate will be adjusted automatically according to the frame
rate.
Fixed Quality: Select the value of quality among Medium, Good, Delicate and
Excellent.
Fixed Bitrate: Set the bitrate of MPEG-4 image transmission for a line. You can select
one value among 64Kbps, 128Kbps, 256Kbps, 384Kbps, 512Kbps, 768Kbps, 1Mbps,
1.5 Mbps, 2 Mbps, 3 Mbps, 4 Mbps, 5 Mbps, and 6 Mbps.
Note: Concerning how to select the suitable image quality for Fixed Quality or Fixed
Bitrate, please refer to the CHAPTER 10. APPENDIX / A. Frame-rate & Bitrate Table.
 IP interval: It’s the ratio of i-frame & p-frame. You can select one among 1, 5, 10, 15, 30,
60, and 120. The ratio smaller, the streaming smoother.
Note: The IP interval value means a ratio of “ P-frame / I-frame “ in a certain section of
frame sequences. The ratio lower, the live view clear. However, live view will lag if the
bandwidth isn’t big enough. In this situation, you have to choose another bigger IP interval
Setting-Basic
Camera
30
F7110 / F7115 User Manual
value to solve the problem.
Note: If Video clip format of General Menu, which is for recording compression, is chosen
MPEG-4, the IP interval option will appear “Auto” automatically and can’t select. The limit
is for avoiding damaging the recording quality of 5 seconds temporary-saved video
recorded on FTP server.
8.2.4 MJPEG
 Viewer authentication:
On: If the viewer authentication is On, the users will be requested to key-in username
and password when using QuickTime Player…etc. to have live viewing.
Off: If the viewer authentication is Off, you can have live viewing on computer by
QuickTime Player…etc. after entering “rtsp://ip:port/video.mjpg” on the URL column
directly.
 Multicasting streaming (if it’s on):
Multicast Address : Specify the multicast server address.
Video / Audio Port: Specify the transmission port number of the video data, from
1024 to 65535.
Time to Live: Set the maximum TTL that multicast can pass through.
Note: Time To Live option determines the maximum length of time (measure as the
number of network routers that can be passed before data arrives at its destination or
is dropped) within which a multicast packet must reach its destination.
 Image Size: Specify the image size when the network camera transmits. Choose among
1280 x 1024, 1280 x 720, 640 x 480, and 320 x 240.
 Frame Rate: Set the frame rate of the MJPEG image. Choose one among 1, 2, 3, 4, 5, 7,
Setting-Basic
Camera
31
F7110 / F7115 User Manual
10, 15, 20, 25, and 30 fps. The unit “fps” stands for “frames per second”.
Note: The frame rate is up to 15 fps at 1280x1024, and up to 30 fps at 640x480.
However, if you would like choose frame rate over 15 fps, the IMAGE SIZE of
H.264/MPEG-4/MJPEG setting page has to been selected 320x240 or 640x480 at the
same time.
 Quality:
Auto: The quality and bit rate will be adjusted automatically according to the frame
rate.
Fixed Quality: Select the value of quality among Medium, Good, Delicate and
Excellent.
Fixed Bitrate: Set the bitrate of MJPEG image transmission for a line. You can select
one among 64Kbps, 128Kbps, 256Kbps, 384Kbps, 512Kbps, 768Kbps, 1Mbps, 1.5
Mbps, 2 Mbps, 3 Mbps, 4 Mbps, 5 Mbps, and 6 Mbps.
Note: Concerning how to select the suitable image quality for Fixed Quality or Fixed
Bitrate, please refer to the CHAPTER 10. APPENDIX / A. Frame-rate & Bitrate Table.
8.2.5 3GPP
 Viewer authentication:
On: If the viewer authentication is On, the users will be requested to key-in username
and password when using QuickTime Player…etc. to have live viewing.
Off: If the viewer authentication is Off, you can have live viewing on computer by
QuickTime Player…etc. after entering “rtsp://ip:port/video.3gp” on the URL column
directly.
 Image Size: Image size for 3GPP is 160 x 120.
 Frame Rate: Set the frame rate of the 3GPP image. Choose one between 5 or 10 fps. The
32
Setting-Basic
Camera
F7110 / F7115 User Manual
unit “fps” stands for “frames per second.”
 Quality:
Auto: The quality and bit rate will be adjusted automatically according to the frame
rate.
Fixed Quality: This item here can’t be selected.
Fixed Bitrate: Set the bitrate of 3GPP image transmission for a line. You can select
one among 64Kbps, 128Kbps, 256Kbps, 384Kbps, 512Kbps, 768Kbps, 1Mbps, 1.5
Mbps, 2 Mbps, 3 Mbps, 4 Mbps, 5 Mbps, and 6 Mbps.
 IP interval: It’s the ratio of i-frame & p-frame. You can select one among 1, 5, 10, 15, 30,
60, and 120. The ratio smaller, the streaming smoother.
Note: The IP interval value means a RATIO of “ P-frame / I-frame “ in a certain section of
frame sequences. The ratio lower, the live view clear. However, live view will lag if the
bandwidth isn’t big enough. In this situation, you have to choose another bigger IP interval
value to solve the problem.
8.2.6 Advanced
 White Balance: Choose the white balance among Auto, Florescent, Incandescent and
Black & White.
 Lighting: The default setting of lighting environment is Auto. However, you may also
choose 50 or 60 Hz upon the lighting environment of your country.
Setting-Basic
Camera
33
F7110 / F7115 User Manual
 Exposure mode: Choose Auto or Manual upon the capture environment.
Auto:

Choose Auto and you have 3 options to adjust the exposure condition.
Back Light Compensate: Click it on and it helps avoid problems in
situations where the main subject ends up being too dark, such as when
shooting people or other subjects in front of a bright background.

Slow Shutter: Click it on and the range of shutter speed will be from 1/5 to
1/120 sec. It will adjust the shutter speed automatically and helpful to
capture the clear image when shooting in a dark place.
High Speed Mode: Click it on and the shutter speed will be close 1/120 sec. as far as
possible to help to capture the motion image of sports or high-speed phenomena.
Manual : Choose Manual and you can select options, such as Shutter Speed, Gain,
and Bad Pixel Compensate.

Shutter Speed: The default value is 1/30 sec. and you can select the value
among 1/4, 1/6, 1/12, 1/30, 1/60, and 1/120 sec.

Gain: The default value is 2 and you can select the value among 0~9. The
value of the gain will influence the brightness of the image. The more the
value is , the brighter the image is. However, the higher gain value might
cause more noise.
 Iris: Choose Auto or Open upon the capture environment.
Auto:
Choose Auto to enable auto Iris.
Open: Choose Open to enable maximum aperture.
Calibrate: Click Calibrate to adjust auto Iris lens. The whole process will continue
2~3 minutes.
Note: Click Calibrate to adjust your auto Iris lens when you change a new one in order to gain best
image quality.
Setting-Basic
Camera
34
F7110 / F7115 User Manual
8.2.7 PLAYBACK
Clicking the button of “Open files” and select the video file recorded previous, you can look
for the desired image. Besides, you can still have the live view in the screen. The function of
each button is as below illustration:
Snapshot
Mirror/ Flip
Pause
Stop
Previous track
Fast forward
Volume
Rewind
Mute on / Mute off
Open files
Next track
Setting-Basic
Camera
Full Screen
35
Open digital zoom
F7110 / F7115 User Manual
8.3 Network
Click the folder of Network to display the sub folders including Information, PPPoE,
DDNS, UPnP, Bonjour, IP Notification, Wireless and Messenger.
8.3.1 Information
Display the MAC address of the device.
 Obtain an IP address automatically (DHCP): If a DHCP server is installed on the
network, to select this while the IP address is assigned by the DHCP server.
 Obtain DNS server address automatically: Select this to obtain the address of DNS
server automatically.
Setting-Basic
Network
36
F7110 / F7115 User Manual
Use the following IP address: Select this option when the fixed IP address is set.
IP
address: Enter the IP address of the device.
Subnet mask: Enter the subnet mask.
Default gateway: Enter the default gateway.
 Use the following DNS server address: Select this when you set the fixed address as the
IP address of DNS server.
Primary DNS server: Enter the IP address of the primary DNS server.
Secondary DNS server: Enter the IP address of the secondary DNS server, if
necessary.
 HTTP port number: Select 80 in general situations. If you want to use a port number
other than 80, select the text box and enter a port number between 1024 and 65535.
When you have set the HTTP port number to a number other than 80 on the Network
Setting screen in the Setup Program, access the device by typing the IP address of the
device on the web browser as follows: Example: when HTTP port number is set to
2000 http://192.168.1.100:2000/
Note: The IP Camera needs to be rebooted after it finishes changing the network setting
completely.
Note: If you connect the IP Camera with your computer directly, the default network domain
of camera is 192.168.1.xx
8.3.2 PPPoE (Point-to-Point Protocol over Ethernet)
If your ISP provides Dynamic IP with authentication by username and password, type all
PPPoE information in this part. When using the PPPoE function, you need to turn on the
DDNS or IP Notification function at same time.
Setting-Basic
Network
37
F7110 / F7115 User Manual
 IP address: The IP address obtained at the PPPoE connecting with network.
 User ID: Enter the user ID for authentication necessary for PPPoE connections. Type it
up to 64 characters.
 Password: Enter the password for authentication necessary for PPPoE connections. Type
it up to 32 characters.
 Re-type password: Re-type the password to confirm.
 Obtain DNS server address automatically: Select this to obtain the address of DNS
server automatically.
 Use the following DNS server address: Select this when you set the fixed address as the
IP address of DNS server.
Primary DNS server: Enter the IP address of the primary DNS server.
Secondary DNS server: Enter the IP address of the secondary DNS server.
Note : 1. PPPoE (Point-to-Point Protocol over Ethernet): PPPoE is a network protocol
for encapsulating Point-to-Point Protocol frames insider Ethernet frames. PPPoE
connection is used mainly with ADSL service where individual users connect to the
ADSL transceiver (modem) over Ethernet work. It also widely used in XDSL (digital
affiliate line such as ADSL, VDSL or SDSL)
2. The IP Camera needs to be rebooted after it finishes changing the network
completely.
3. The IP Camera with Intelligent IP Installer can’t be founded after turning on the
PPPoE and reboot.
Setting-Basic
Network
38
F7110 / F7115 User Manual
8.3.3 DDNS (Dynamic DNS)
DDNS is a system which allows the domain name data held in a name server to be updated
in real time. The most common use for DDNS is allowing an internet domain name to be
assigned to a computer with a varying / dynamic IP Address. This makes it possible for other
sites on the internet to establish connection to the machine without needing to track the IP
Address themselves.
 Server name: Choose the DDNS Server from the list.
 User ID: Enter the user ID for authentication necessary for DDNS connections. Type it up
to 64 characters.
 Password: Enter the password for authentication necessary for DDNS connections. Type
it up to 32 characters.
 Re-type password: Re-type the password to confirm.
 Host name: Enter the host name that is registered to the DDNS server.
 Periodical Update: Update your DDNS information periodically.
Setting-Basic
Network
39
F7110 / F7115 User Manual
Note : How to apply DDNS username and Host name?? You can apply DDNS
username and Host name by the following steps:
1. Login http://www.dyndns.org,
click the Creat Account
2. Input all information and
follow step by step with
DynDNS
Setting-Basic
Network
40
F7110 / F7115 User Manual
3. Login with new account and
click Account → My Hosts →
Add Host Services
4. Type domain in the Hostname
field and select sub-domain
Setting-Basic
Network
41
F7110 / F7115 User Manual
5. After type information,
check your DDNS service.
6. Type your DDNS User ID,
Password and Host name in
Setting → Network → DDNS.
After completing setting,
reboot IP Camera.
Setting-Basic
Network
42
F7110 / F7115 User Manual
8.3.4 UPnP (Universal Plug and Play)
If you have a Router to access to internet and the Router supports UPnP IGD function, you
need to turn on the UPnP Port Forwarding function.
 HTTP port: Enter the HTTP port number and default HTTP port is 80.
 SSL port: Enter the SSL port number and default SSL port is 443.
 RTSP port: Enter the RTSP port, default value is 554 for computer view.
Note : UPnP (Universal Plug and Play): UPnP is a set of computer network protocol. It
allows devices to connect seamlessly and simplify the implementation of networks in the
home and corporate environments.
Setting-Basic
Network
43
F7110 / F7115 User Manual
8.3.5 Bonjour
Bonjour, also known as zero-configuration networking, enables automatic discovery of
computers, devices, and services on IP networks. Bonjour uses industry standard IP protocols
to allow devices to automatically discover each other without the need to enter IP addresses or
configure DNS servers.
 Device Name: Enter Device Name you wish.
Note: How to use Bonjour in your Windows Browser UI? Please check the link below:
http://www.apple.com/support/downloads/bonjourforwindows.html
Setting-Basic
Network
44
F7110 / F7115 User Manual
8.3.6 IP Notification
When network notify type is set to “ON”, you can send an e-mail notification of the completion of
the network setting.
 Notify Type: You can select the notify type among DHCP, Static IP, and PPPoE.
 SMTP Server Name: Type the SMTP server name up to 64 characters, or the IP address
of the SMTP server.
 SMTP Server Port: You can set port number from 1~65535 according to your mail
server. The default value is 25.
Security
setting: Tick SSL box if the mail server you use has security restriction.
Note: If you use g-mail as your mail server, you should set 25 as your port number and
tick SSL box.
 Authentication: Select the authentication required when you send an email.
Off: Select if no authentication is necessary when an email is sent.
On: When authentication is necessary an e-mail is sent, there are SMTP, POP before
SMTP or both three options.
 SMTP: Select if SMTP authentication is necessary when an e-mail is sent.
 POP before SMTP: Select if POP before SMTP authentication is necessary when an
e-mail is sent.
POP server name: It is necessary when the POP before SMTP is selected in
Authentication. Type the POP (receiving mail) server name up to 64 characters, or
type the IP address of the POP server. This setting is necessary when the SMTP server
which sends e-mails performs authentication using the POP user account.
Setting-Basic
Network
45
F7110 / F7115 User Manual
User
name, Password: Type the user name and Password of the user who has the
mail account. This setting is necessary when the SMTP server which sends e-mails
performs authentication.
 Recipient e-mail address: Type the recipient e-Mail address up to 64 characters. You can
specify up to three recipient E-mail addresses.
 Administrator e-mail address: Type the Administrator e-Mail address up to 64
characters. This address is used for reply mail and sending system messages from the SMTP
server.
 Subject: Type the subject/title of the e-Mail up to 64 characters. With respect to mail
which is sent according to the IP notification.
 Message: Type the text of the E-mail up to 384 characters. Default value provides
network information including IP, Port, MAC, Model, Firmware Version and Web Version.
8.3.7 Wireless (Only for F7115)
The wireless network has to be set up by using cable network connection. After setting the
camera correctly, the wireless function can work with cable network connection. Wireless
settings must be the same as the access point or ad-hoc device. When changing the settings
they should always be made first in the camera and then in the wireless access point. This
ensures that the camera is always accessible when making changes.
Setting-Basic
Network
46
F7110 / F7115 User Manual
 Status of Wireless Network
This list is the result of network scan. The network is currently linked to will be shown in
blue. The following information is provided.
ESSID - The name of a wireless network (or ad-hoc device). If the same name occurs
several times this means that several access points for that network were found. The
camera cannot be configured to only associate with one particular access point.
Mode - Shows if the network type is Master (access point or router) or Ad-Hoc
(another client).
Security - Shows which type of security the network uses. See below for the security
types supported by the camera.
Channel - Shows the wireless channel currently in use.
Signal strength - Shows the signal strength.
Bit rate - Shows the bit rate in Megabit/s. This can only be shown for the access point
currently in use. Note that the bit rate shown is the current rate, and that this value
may vary over time.
 Wireless Setting
These settings control how the camera interacts with the wireless network. It is also possible
to enable wireless encryption apart from identifying the wireless network.
IP Address – This displays blank, 0.0.0.0 or IP Address. When it is blank, the camera
doesn’t establish physical link with access point yet. The 0.0.0.0 means that physical
link was established but trying to get IP address. When it displays IP address, then
user can use wireless network.
ESSID (ESSID is sometimes written as SSID.) - This is the name of the wireless
network the camera is configured for. The field accepts up to 32 alphanumeric
characters. The name must be exactly the same as that used in the wireless access
point or the connection will not be established.
Leaving this field blank means the camera will attempt to access the nearest open
network.
Mode
- Setting this to Managed means the camera will attempt to access the nearest
open access point. The Ad-hoc option allows the camera to connect to other wireless
devices clients.
Note : 1. WPA-/WPA2-PSK (Wi-Fi Protected Access - Pre-Shared Key) the camera uses
a pre-shared key (PSK) to initiate WPA security. The pre-shared key is entered on the
access point and on each device on the wireless network. The key can be entered either
as Manual hex, as 64 hexadecimal (0-9, A-F) characters, or as a Passphrase, using 8 to
63 ASCII characters. The access point keeps out unauthorized users by requiring the
key to communicate.
2. WEP (Wired Equivalent Protection) the original security standard used in wireless
networks that provides a minimal level of security that can deter minor trespasses. The
Setting-Basic
Network
47
F7110 / F7115 User Manual
administrator can select the key length among 64 or 128 bits. 64bits is the default
setting.
8.3.8 WPS
WPS (Wi-Fi Protected Setup) also known as a standard for easy and secure establishment of
a wireless home network.
 Status of WPS
This list is the result of network scan that only provide wireless AP with WPS function. The
network is currently linked to will be shown in blue.
 Configuration Method
PBC
– Select and click Start to start WPS configuration.
PIN
– Select and click Generate new PIN to generate a new PIN code and then you
can click Start to start WPS configuration.
Setting-Basic
Network
48
F7110 / F7115 User Manual
8.3.9 Messenger
Messenger function provide an easy-connect feature. User can easy to know what camera’s
private and public IP address is.
 Protocol: support MSN only.
 Login Account: Camera will use this account to login MSN server. This MSN account
should be applied form http://www.msn.com.
 Password: password for this msn account.
 Re-type password: re-type password to double confirm.
 Alias: This alias will display on MSN like the following which display in red frame.
 Port range: Camera will select one port from this port range for video transmission.
Setting-Basic
Network
49
F7110 / F7115 User Manual
 Video Mode: You can choose to receive video streaming from Computer view (MPEG-4)
or Mobile view (3GPP).
 IP Notification: Switch the IP notification On / Off. If this feature switches On, camera
will send IP notification to the users who are allowed.
 Privacy: Switch privacy On / Off. When privacy turns on, only those users in allow list
can access the camera.
 User: Input to this blank to edit allow list.
 Allow list: When privacy turns on, only those users in allow list can access the camera.
Setting-Basic
Network
50
F7110 / F7115 User Manual
8.4 Security
Click the folder of Security to display the sub folders including Account and HTTPS.
8.4.1 Account
The device fault account and password setting is “admin / admin”. That means everyone
who knows IP address can access the device including all configuration. It is necessary to
assign a password if the device is intended to be accessed by others.
 User name: Set a user name between 4-16 characters.
 Password: Set a password between 4-16 characters.
 Re-type Password: Re-type the password to confirm.
 Viewer Mode: Set the user mode among Admin, Operator, and Viewer. Different viewer
mode has different limits of authority.
The Admin mode has all authority of configuration.
The Operator mode can not only view the Live View but also control the PTZ (apply
in speed dome).
The Viewer mode only can view the Live View.
 Viewer Authentication: Select On, allows any viewer direct access to Live View. Select
Off, allow admin, operator, or viewer access to Live View.
Setting-Basic
Security
51
F7110 / F7115 User Manual
8.4.2 HTTPS
HTTPS is a URL scheme used to indicate a secure HTTP connection. It is syntactically
identical to the http:// scheme normally used for accessing resources using HTTP. Using an
https: //URL/ with a different default TCP port (443) and an additional encryption /
authentication layer between the HTTP and TCP. You can use the IP camera through HTTPS
easily by using https:// instead of http://.
 Create & Install: Create a self-signed certificate for HTTPS to recognize.
 Installed Certificate: Display or remove the properties of the installed certificate.
 HTTPS Connection Policy: Set HTTPS connection policy for different level of users.
 To use the HTTPS encryption, please set up “Create self-signed certificate” for the first
time you use the HTTPS function, and then set up the connection policy for different users.
Note: When enable HTTPS with RTSP on mode, the IP Camera only protect the setting such
as username and password and do not protect video and audio. When enable HTTPS with
RTSP off mode, the IP Camera will protect all setting including video and audio.
Setting-Basic
Security
52
F7110 / F7115 User Manual
8.4.3 IP Filter
IP Filter provides the function of controlling the range of IP address, similar with firewall
service.
 IP filter: Select if you would like to have IP filter function.
 Allow range:
The default range is from 0.0.0.0 to 255.255.255.255. Enter the “Start IP
address” and “End IP address” in the range, then you can add a new allow range in allow
range list.
 Allow range list: Except the default range 0.0.0.0~255.255.255.255, the list allows to
add four more sets of allow range at most.
 Deny range: You can define the deny range by entering “Start IP address” and “End IP
address”
 Deny range list: You can define not more than five sets of deny range in the list.
Setting-Basic
Security
53
Chapter 9. Setting-Advanced
F7110 / F7115 User Manual
Click the folder of Advanced to display the sub folders including PTZ control, Preset position,
Patrol, FTP client, SMTP, Network storage, HTTP event, Alarm output, Schedule, Alarm
input, Alarm buffer, Motion detection, Audio detection, and System Log.
9.1 PTZ Control
In this section, it provides Pan, Tilt, Auto Pan speed control setting.
9.1.1 Setting
 Pan Speed: Use it to move bar from 0 to 100.
 Tilt Speed: Use it to move bar from 0 to 100.
 Auto Pan Speed: Use it to move bar from 0 to 100.
 Protocol: Select protocol of your pan/tilt motor.
 Baud Rate: baud rate of your pan/tilt motor.
 Address: Select address of your pan/tilt motor.
54
Setting-Advanced
F7110 / F7115 User Manual
9.2 Preset Position
In this section, up to 32 Pan and Tilt positions can be saved, as well as the home position,
which the device faces to when the power is turned on.
9.2.1 Setting
 Set: Use it to save the camera position to a preset number.
Carry out the following steps.

Move the camera to the position to be saved while you are checking the image with the
main console.

Write the preset position name in Preset Pos. Name text box.

Click the SET. The camera position is saved.

If want to set this position as home position, click Home option on. Click the SET. The
camera position is saved as home position.
Note: Setting the new Home position will replace previous Home position.
 Reset: When writing the preset position name in Preset Pos. Name text box, press Reset to
clean filed words.
 Delete All: Be careful! When pressing Delete All, all Preset Position information will be
deleted.
Setting-Advanced
Present Position
55
F7110 / F7115 User Manual
 Delete: Select a preset number from 1 to 32 in the list box. Use it to delete specific number
preset position setting.
9.2.2 Alarm Sending
 Alarm
 Motion
detection: Click it on for using Motion detection function as a sensor. You
can set motion detection function at the motion detection function screen.
Note: You can set motion detection at motion detection screen. (Please go “Setting →
Advanced →Motion detection → Setting”) For more details, you can check Chapter 9.12.
 Audio
detection: Click it on for using Audio detection function as a sensor. You can
set audio detection function at the audio detection function screen.
Note: You can set audio detection at audio detection screen. (Please go “Setting →
Advanced →Audio detection → Setting”)
 Network
For more details, you can check Chapter 9.13.
Link Down: Click it on to use alarm buffer function for recording audio file
in the IP CAM before and after disconnected network.
Setting-Advanced
Present Position
56
F7110 / F7115 User Manual
Note: You can set alarm buffer at alarm buffer screen. (Please go “Setting → Advanced →
Alarm buffer → Setting”)
 Alarm
For more details, you can check Chapter 9.11.
Input: Select the connected alarm. Sensor input1: The external sensor which
is connected to sensor input1 of the alarm input.
Note: You can set the alarm input function at alarm input screen. (Please go “Setting →
Advanced → Alarm input → Setting”). For more details, you can check Chapter 9.10.
 Effective period: Set the period when the periodical sending is effective.
Always: The periodical sending is always effective.
Schedule: You can specify the period when the periodical sending is effective in the
Schedule setting in the other section.
Note: You can set schedule function at schedule screen. (Please go “Setting → Advanced
→ Schedule → Setting”) For more details, you can check Chapter 9.9.
Setting-Advanced
Present Position
57
F7110 / F7115 User Manual
9.3 Patrol
There are four patrol tours to set for composing different preset positions. Each one lists up to
8 positions which can be programmed, and the camera moves to the programmed positions
sequentially. The camera stops when it moves to the last preset position.
 Tour name: Rename the tour name.
 Tour position

Order: There are 8 orders to select for camera directions.

Select Pos.: There are up to 32 preset positions to choose for each order.

Waiting time: When you click Recall, the camera moves to position of the selected preset
number.

Clear: When setting specific preset number position to tour, click Clear to clear this
direction information.

Clear All: Be careful! When you click Clear All, it will clear this tour all information out.

Set: Use it to save the camera position to a preset number.
 Set as default tour: Click it on to set this tour as default.

Tour Start: To click Tour Start, and the camera moves on patrol tour.

Tour Stop: While the camera moves on patrol tour, click Tour Stop to stop the patrol
tour.
 Carry out the following steps:
1. Click Order to choose one of eight orders.
2. Click Select Pos. to set the preset position.
3. Click the SET. The tour position is saved.
4. Follow the steps to set the other orders.
5. Click the OK to save the tour.
Setting-Advanced
Patrol
58
F7110 / F7115 User Manual
9.4 FTP Client
Use this menu to set up for capturing and sending a image or video clip to an FTP server. By
using FTP client function, you can send files which has been shot and recorded linked with
the external sensor input or with the built-in motion detection function to FTP server. FTP
client setting menu is composed of two tabs, General, Alarm sending and Periodical
sending.
9.4.1 General
Select On when you use FTP function. The FTP client Setting screen appears.
Select Off, when you do not wish to use the FTP client function.
Note: The frame rate and operability on the main viewer may decrease while a file is
being transmitted by the FTP client function.
 FTP server name: Type the FTP server name to upload still images up to 64 characters,
or the IP address of the FTP server.
 User name: Type the user name for the FTP server.
 Password: Type the password for the FTP server.
 Retype password: To confirm the password, type the same characters as you typed in the
Password box.
 Passive mode: Set whether you use the passive mode of FTP server or not when
connecting to FTP server. Select On to connect to FTP server using the passive mode.
Setting-Advanced
FTP Client
59
F7110 / F7115 User Manual
 Attached file type: You can choose snapshot or video clip for alarm sending. Select
“Snapshot,” one snapshot will be transmitted to the specified FTP server while motion
detection / audio detection / alarm input triggered. Select “Video clip,” one 5-seconds
video clip will be transmitted.
 Test: After setting the FTP server information, you can tick the test key to test if the
connection between IP CAM and FTP server works.
9.4.2 Alarm sending
Set to forward a snapshot or video clip file to the specified FTP server linked with the alarm
detection by the external sensor input or by the built-in motion detection function. Select On
to send the file to FTP server linked with the alarm detection.
 Remote Path: Type the path to the destination in FTP server up to 64 characters.
 Image File Name: Type the file name you want to assign to the files when sending to the
FTP server. You can use up to 10 alphanumeric characters, - (hyphen) and _ (underline)
for naming.
 Suffix: Select a suffix to add to the file name
 Date & time: The date & time suffix is added to the Image file name. The date/time
suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits),
hour (2 digits), minute (2 digits), second (2 digits), and consecutive number (2 digits),
thus 14-digit number is added to the file name.
Setting-Advanced
FTP Client
60
F7110 / F7115 User Manual
Sequence
number: A consecutive number of 10 digits between 0000000001 and
4294967295 and two fixed digits 00 is added to the Image file name.
Sequence number clear: Click Clear and the suffix of the sequence number returns
to 1.
 Alarm
 Motion
detection: Click it on for using Motion detection function as a sensor. You
can set motion detection function at the motion detection function screen.
Note: You can set motion detection at motion detection screen. (Please go “Setting →
Advanced →Motion detection → Setting”) For more details, you can check Chapter 9.12.
 Audio
detection: Click it on for using Audio detection function as a sensor. You can
set audio detection function at the audio detection function screen.
Note: You can set audio detection at audio detection screen. (Please go “Setting →
Advanced →Audio detection → Setting”)
 Network
For more details, you can check Chapter 9.13.
link down: Click it on to receive a snapshot or a video clip while network
link down. If Attached file type (go “Setting → Advanced → FTP client → General”)
was clicked as video clip, you can use Alarm buffer function as a sensor. It’s for
recording audio file in the IP CAM before and after disconnected network.
Note: You can set alarm buffer at alarm buffer screen. (Please go “Setting → Advanced →
Alarm buffer → Setting”)
 Alarm
For more details, you can check Chapter 9.11.
Input: Select the connected alarm. Sensor input1: The external sensor which
is connected to sensor input1 of the alarm input.
Note: You can set the alarm input function at alarm input screen. (Please go “Setting →
Advanced → Alarm input → Setting”). For more details, you can check Chapter 9.10.
 Effective period: Set the period when the periodical sending is effective.
Always: The periodical sending is always effective.
Schedule: You can specify the period when the periodical sending is effective in the
Schedule setting in the other section.
Note: You can set schedule function at schedule screen. (Please go “Setting → Advanced
→ Schedule → Setting”) For more details, you can check Chapter 9.9.
Setting-Advanced
FTP Client
61
F7110 / F7115 User Manual
9.4.3 Periodical sending
Select On, you can set to send an image file to FTP server periodically.
 Remote path: Remote path: Type the path to storage location of FTP server which you
have authorized.
 Image file name: Type the file name of snapshot or video clip sent by SMTP up to 10
alphanumeric characters, - (hyphen) and _ (under score).
 Suffix: Select a suffix to be added to the file name sent by SMTP.
None: The name of the sent file will be the Image file name.
Date & time: The date & time suffix is added to the Image file name. The date & time
suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits),
hour (2 digits), minute (2 digits) and second (2 digits), and consecutive number (2
digits), thus 14-digit number is added to the file name.
Sequence number: A consecutive number is added to the Image file name.
Sequence number clear: Click Clear and the suffix of the sequence number returns
to 1.
 Interval: Set the periodical sending is effective interval. Min value is 1 min and Max
value is 24 hour.
 Effective period: Set the period when the periodical sending is effective.
Always:
The periodical sending is always effective.
Schedule: You can specify the period when the periodical sending is effective in the
schedule setting in the other section. Please check “Setting → Advanced→
Schedule →Setting”.
Note: You can set schedule function at schedule screen. (Please go “Setting → Advanced
→ Schedule → Setting”) For more details, you can check Chapter 9.9.
Setting-Advanced
FTP Client
62
F7110 / F7115 User Manual
9.5 SMTP
Set the SMTP menu when you want to send an image or video clip via e-mail. By using
Mail (SMTP) function, you can send a mail with attached file which has been shot linked
with the external sensor input or with the built-in motion detection function. The file can
also be sent periodically. E-Mail (SMTP) setting menu is composed of three tabs, General,
Alarm sending and Periodical sending.
9.5.1 General
Select On when you use the SMTP function. The common setting options are displayed
below. Select Off, if you do not wish to use the e-Mail (SMTP) function.
Note : The Setting of general part will be the same as IP Notification. (Please check “Setting →
Basic → Network → IP Notification”)
 SMTP server name: Type the SMTP server name up to 64 characters, or the IP address
of the SMTP server.
 SMTP Server Port: You can set port number from 1~65535 according to your mail
server. The default value is 25.
Security
setting: Tick SSL box if the mail server you use has security restriction.
63
Setting-Advanced
SMTP
F7110 / F7115 User Manual
Note: If you use g-mail as your mail server, you should set 25 as your port number and
tick SSL box.
 Authentication: Select the authentication required when you send an email.
Off: Select if no authentication is necessary when an email is sent.
On: When authentication is necessary an e-mail is sent, select one of the
authentication methods from the followings.
 SMTP: Select if SMTP authentication is necessary when an e-mail is sent.
 POP before SMTP: Select when POP before SMTP authentication is necessary when an
e-mail is sent.
Note:When you set to On, be sure to select either or both SMTP or / and POP before SMTP.
POP server
name: It is necessary when the POP before SMTP is selected in
Authentication. Type the POP (receiving mail) server name up to 64 characters, or
type the IP address of the POP server. This setting is necessary when the SMTP server
which sends e-mails performs authentication using the POP user account.
User name, Password: Type the user name and Password of the user who has the
mail account. This setting is necessary when the SMTP server which sends e-mails
performs authentication.
 Recipient e-mail address: Type the recipient e-Mail address up to 64 characters. You can
specify up to three recipient E-mail addresses.
 Administrator e-mail address: Type the Administrator e-Mail address up to 64
characters. This address is used for reply mail and sending system messages from the
SMTP server.
 Attached file type: You can choose snapshot or video clip for alarm sending. Select
“Snapshot,” one snapshot will be transmitted to the administrator’s e-mail address while
motion detection / audio detection / alarm input triggered. Select “Video Clip,” one
5-seconds video clip will be transmitted.
 Subject: Type the subject/title of the e-Mail up to 64 characters. With respect to mail
which is sent according to the alarm detection when Alarm sending of the alarm tab is set
to On, the characters standing for the sensor type added to the subject.
 Message: Type the text of the E-mail up to 384 characters. (A line break is equivalent to 2
characters.)
 Test: After setting the SMPT server information, you can tick the test key to test if the
connection between IP CAM and the SMPT server works.
Setting-Advanced
SMTP
64
F7110 / F7115 User Manual
9.5.2 Alarm sending
Set to send the mail with connection to the alarm detection by the external sensor input or by
the built-in motion detection function. Select On to send the image file to SMTP server
linked with the alarm detection.
 Alarm sending: Select On to set to send mail with connection to the alarm detection.
 File attachment: Set whether an image file is attached to the mail sent or not. When On
is selected, the image file made by the settings below is attached. When Off is selected,
only the message is sent.
 Image file name: Type the file name you want to assign to the file attached to a mail. You
can use up to 10 alphanumeric, - (hyphen) and _ (underscore) for naming.
 Suffix: Select a suffix to add to the file name
None: The name of the sent file will be the Image file name.
Date & time: The date & time suffix is added to the Image file name. The date & time
suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits),
hour (2 digits), minute (2 digits) and second (2 digits), and consecutive number (2
digits), thus 14-digit number is added to the file name.
Sequence number: A consecutive number is added to the Image file name.
Sequence number clear: Click Clear and the suffix of the sequence number returns
to 1.
Setting-Advanced
SMTP
65
F7110 / F7115 User Manual
 Alarm
 Motion
Detection: Click it on for using Motion Detection function as a sensor. You
can set motion detection function at the motion detection function screen.
Note: You can set motion detection at motion detection screen. (Please go “Setting →
Advanced → Motion detection → Setting”) For more details, you can check Chapter 9.12.
 Audio
detection: Click it on for using Audio detection function as a sensor. You can
set audio detection function at the audio detection function screen.
Note: You can set audio detection at audio detection screen. (Please go “Setting →
Advanced →Audio detection → Setting”)
 Network
For more details, you can check Chapter 9.13.
Link Down: Click it on to receive a snapshot or a video clip while network
link down. If Attached file type (go “Setting → Advanced → FTP client → General”)
was clicked as video clip, you can use Alarm buffer function as a sensor. It’s for
recording audio file in the IP CAM before and after disconnected network.
Note: You can set alarm buffer at alarm buffer screen. (Please go “Setting → Advanced
→ Alarm buffer → Setting”)
 Alarm
For more details, you can check Chapter 9.11.
Input: Select the connected alarm. Sensor input1: The external sensor which
is connected to sensor input1 of the alarm input.
Note: You can set the alarm input function at alarm input screen. (Please go “Setting →
Advanced → Alarm input → Setting”). For more details, you can check Chapter 9.10.
 Effective period: Set the period when the periodical sending is effective.
Always: The periodical sending is always effective.
Schedule: You can specify the period when the periodical sending is effective in the
Schedule setting in the other section.
Note: You can set schedule function at schedule screen. (Please go “Setting → Advanced
→ Schedule → Setting”) For more details, you can check Chapter 9.9.
Setting-Advanced
SMTP
66
F7110 / F7115 User Manual
9.5.3 Periodical sending
You can set to send an image file by SMTP server periodically by selecting On to send the
image file by SMTP server linked with setting period.
 Image file name: Type the file name of the image sent by SMTP up to 10 alphanumeric
characters, - (hyphen) and _ (under score).
 Suffix: Select a suffix to be added to the file name sent by SMTP.
Date
& time: The date & time suffix is added to the Image file name. The date & time
suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits),
hour (2 digits), minute (2 digits) and second (2 digits), and consecutive number (2
digits), thus 14-digit number is added to the file name.
Sequence
number: A consecutive number is added to the Image file name.
Sequence
number clear: Click Clear and the suffix of the sequence number returns
to 1.
 Interval: Set the periodical sending is effective interval. Min value is 1 min and Max
value is 24 hour.
 Effective period: Set the period when the periodical sending is effective.
Always:
The periodical sending is always effective.
Schedule:
You can specify the period when the periodical sending is effective in the
schedule setting in the other section. Please check “Setting → Basic → Advanced
→ Schedule → Setting.”
Note: You can set schedule function at schedule screen. (Please go “Setting → Advanced →
Schedule → Setting”) For more details, you can check Chapter 9.9.
Setting-Advanced
SMTP
67
F7110 / F7115 User Manual
9.6 Network storage
Network storage provides the storage function for saving image files to the specified
computer and folder connected with the operating computer.
9.6.1 General
Select On if you would like to use the network storage function. Then choose one protocol
between Windows network (SMB/CIFS) and Unix network (NFS).

 Protocol - Windows network (SMB/CIFS):.
Network
storage location: Type the IP or name of specified computer and folder. For
example, \\IP/folder name or \\ my_nas:\folder name.
Workgroup:
User
Type the name of workgroup which the operating computer belongs.
name & Password: Type the name and password for workgroup.
Attached
file type: You can choose snapshot or video clip for alarm sending. Select
“Snapshot,” one snapshot will be transmitted to the specified network storage location
while motion detection / audio detection / alarm input triggered. Select “Video clip,”
one video clip which can be selected from 5 seconds to 60 seconds will be
transmitted.
Test: After
setting the network storage location information, you can tick the test key
to test if the connection between IP CAM and network storage location works.
Setting-Advanced
Network Storage
68
F7110 / F7115 User Manual
 Protocol- Unix network (NFS):
Network
storage location: Type the IP or name of specified computer and folder. For
example, \\IP/folder name or \\ my_nas:\folder name.
Test: After
setting the network storage location information, you can tick the test key
to test if the connection between IP CAM and network storage location works.
Note: If the recording video file is assigned to be stored in a low-speed device (ex.
low-speed USB storage disk), there might be some problems to complete the storage.
9.6.2 Alarm sending
Set to transmit the snapshot or video clip file with connection to the alarm detection by the
external sensor input or by the built-in motion detection function. Select On to send the file
to network storage location linked with the alarm detection.
Setting-Advanced
Network Storage
69
F7110 / F7115 User Manual
 Alarm sending: Select On to set to send mail with connection to the alarm detection.
 Image file name: Type the file name you want to assign to the file to attach a mail. You
can use up to 10 alphanumeric, - (hyphen) and _ (underscore) for naming.
 Suffix: Select a suffix to add to the file name
Date & time: The date & time suffix is added to the Image file name. The date & time
suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits),
hour (2 digits), minute (2 digits) and second (2 digits), and consecutive number (2
digits), thus 14-digit number is added to the file name.
Sequence number: A consecutive number is added to the Image file name.
Sequence number clear: Click Clear and the suffix of the sequence number returns
to 1.
 Alarm
 Motion
Detection: Click it on for using Motion Detection function as a sensor. You
can set motion detection function at the motion detection function screen.
Note: You can set motion detection at motion detection screen. (Please go “Setting →
Advanced → Motion detection → Setting”) For more details, you can check Chapter 9.12.
 Audio
detection: Click it on for using Audio detection function as a sensor. You can
set audio detection function at the audio detection function screen.
Note: You can set audio detection at audio detection screen. (Please go “Setting →
Advanced →Audio detection → Setting”)
 Network
For more details, you can check Chapter 9.13.
Link Down: Click it on to receive a video clip while network link down.
It’s for recording video file in the IP CAM before and after disconnected network.
Note: You can set alarm buffer at alarm buffer screen. (Please go “Setting → Advanced →
Alarm buffer → Setting”)
 Alarm
For more details, you can check Chapter 9.11.
Input: Select the connected alarm. Sensor input1: The external sensor which
is connected to sensor input1 of the alarm input.
Note: You can set the alarm input function at alarm input screen. (Please go “Setting →
Advanced → Alarm input → Setting”). For more details, you can check Chapter 9.10.
 Effective period: Set the period when the periodical sending is effective.
Always: The periodical sending is always effective.
Schedule: You can specify the period when the periodical sending is effective in the
Schedule setting in the other section.
Note: You can set schedule function at schedule screen. (Please go “Setting → Advanced
→ Schedule → Setting”) For more details, you can check Chapter 9.9.
Setting-Advanced
Network Storage
70
F7110 / F7115 User Manual
9.6.3 Periodical recording
You can set up to transmit image files to the network storage location periodically by
selecting On.
 Image file name: Type the file name you want to assign to the file transmitted to the
network storage location. You can use up to 10 alphanumeric, - (hyphen) and _
(underscore) for naming.
 Suffix: Select a suffix to add to the file name
Date & time: The date & time suffix is added to the Image file name. The date & time
suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits),
hour (2 digits), minute (2 digits) and second (2 digits), and consecutive number (2
digits), thus 14-digit number is added to the file name.
Sequence number: A consecutive number is added to the Image file name.
Sequence number clear: Click Clear and the suffix of the sequence number returns
to 1.
 File size: The file size of image or video clip transmitted to the network storage location
can’t over 50MB.
 Cyclic size: The total amount of files transmitted to the network storage location has to be
in the range from 100 to 1024000MB.
 Recording time: Set the period when the periodical recording is effective.
Always:
The periodical recording is always effective.
Schedule: You can specify the period when the periodical recording is effective in the
Schedule setting in the other section.
Note: You can set schedule function at schedule screen. (Please go “Setting → Advanced
→ Schedule → Setting”) For more details, you can check Chapter 9.9.
Setting-Advanced
Network Storage
71
F7110 / F7115 User Manual
9.7 Memory Card
Memory card provides local storage function for saving image files to the specified
SD/SDHC card in your camera. This function can be enabled only when you insert
SD/SDHC card to the camera and the SD/SDHC card works well.
9.7.1 General
Select On if you would like to use the memory card function. Then click Execute to format
your SD/SDHC card or click OK to enable memory card function directly.
 Card Status: Show the space free/total size of your memory card.
 Card Status Notification: Select On to enable card status notification.
Capacity
Warning: Select capacity warning when the space free is 5%, 10%, 25% or
50%.
SMTP Server
Name: Type the SMTP server name up to 64 characters, or the IP
address of the SMTP server.
SMTP Server
Port: You can set port number from 1~65535 according to your mail
server. The default value is 25.
Security
Setting: Tick SSL box if the mail server you use has security restriction.
Note: If you use g-mail as your mail server, you should set 25 as your port number and
tick SSL box.
Setting-Advanced
Memory Card
72
F7110 / F7115 User Manual
Authentication:
Select the authentication required when you send an email.
Off: Select if no authentication is necessary when an email is sent.
On: When authentication is necessary an e-mail is sent, select one of the
authentication methods from the followings.
SMTP: Select if SMTP authentication is necessary when an e-mail is sent.
POP before SMTP: Select when POP before SMTP authentication is necessary
when an e-mail is sent.
Note:When you set to On, be sure to select either or both SMTP or / and POP before SMTP.
POP server
name: It is necessary when the POP before SMTP is selected in
Authentication. Type the POP (receiving mail) server name up to 64 characters, or
type the IP address of the POP server. This setting is necessary when the SMTP server
which sends e-mails performs authentication using the POP user account.
User name, Password: Type the user name and Password of the user who has the
mail account. This setting is necessary when the SMTP server which sends e-mails
performs authentication.
Recipient e-mail address: Type the recipient e-Mail address up to 64 characters. You
can specify up to three recipient E-mail addresses.
Administrator e-mail address: Type the Administrator e-Mail address up to 64
characters. This address is used for reply mail and sending system messages from the
SMTP server.
 Test: Click to test your SMTP setting works or not.
 Overwrite: Select on to disable capacity warning and overwrite your memory card when
space free is not enough.
 File Manager: click to manage your memory card.
Refresh:
Click
to refresh this page.
Back: Click
to back folder.
File Name: Click the following file name to forward folder.
Select All: Select all to delete or save to network storage.
Delete: Delete selected folder or files.
Save to network storage: Save selected folder or files to configured network storage.
Setting-Advanced
Network Storage
73
F7110 / F7115 User Manual
9.7.2 Alarm sending
Set to transmit the snapshot or video clip file with connection to the alarm detection by the
external sensor input or by the built-in motion detection function. Select On to send the file
to network storage location linked with the alarm detection.
 Alarm sending: Select On to set to send mail with connection to the alarm detection.
 Image file name: Type the file name you want to assign to the file to attach a mail. You
can use up to 10 alphanumeric, - (hyphen) and _ (underscore) for naming.
 Suffix: Select a suffix to add to the file name
Date & time: The date & time suffix is added to the Image file name. The date & time
suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits),
hour (2 digits), minute (2 digits) and second (2 digits), and consecutive number (2
digits), thus 14-digit number is added to the file name.
Sequence number: A consecutive number is added to the Image file name.
Sequence number clear: Click Clear and the suffix of the sequence number returns
to 1.
 Alarm
 Motion
Detection: Click it on for using Motion Detection function as a sensor. You
can set motion detection function at the motion detection function screen.
Note: You can set motion detection at motion detection screen. (Please go “Setting →
Advanced → Motion detection → Setting”) For more details, you can check Chapter 9.12.
 Audio
detection: Click it on for using Audio detection function as a sensor. You can
set audio detection function at the audio detection function screen.
Setting-Advanced
Memory Card
74
F7110 / F7115 User Manual
Note: You can set audio detection at audio detection screen. (Please go “Setting →
Advanced →Audio detection → Setting”)
 Network
For more details, you can check Chapter 9.13.
Link Down: Click it on to receive a video clip while network link down.
It’s for recording video file in the IP CAM before and after disconnected network.
Note: You can set alarm buffer at alarm buffer screen. (Please go “Setting → Advanced →
Alarm buffer → Setting”)
 Alarm
For more details, you can check Chapter 9.11.
Input: Select the connected alarm. Sensor input1: The external sensor which
is connected to sensor input1 of the alarm input.
Note: You can set the alarm input function at alarm input screen. (Please go “Setting →
Advanced → Alarm input → Setting”). For more details, you can check Chapter 9.10.
 Effective period: Set the period when the periodical sending is effective.
Always: The periodical sending is always effective.
Schedule: You can specify the period when the periodical sending is effective in the
Schedule setting in the other section.
Note: You can set schedule function at schedule screen. (Please go “Setting → Advanced
→ Schedule → Setting”) For more details, you can check Chapter 9.9.
9.7.3 Periodical recording
You can set up to transmit image files to the network storage location periodically by
selecting On.
 Image file name: Type the file name you want to assign to the file transmitted to the
network storage location. You can use up to 10 alphanumeric, - (hyphen) and _
(underscore) for naming.
 Suffix: Select a suffix to add to the file name
75
Setting-Advanced
Memory Card
F7110 / F7115 User Manual
Date
& time: The date & time suffix is added to the Image file name. The date & time
suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits),
hour (2 digits), minute (2 digits) and second (2 digits), and consecutive number (2
digits), thus 14-digit number is added to the file name.
Sequence number: A consecutive number is added to the Image file name.
Sequence number clear: Click Clear and the suffix of the sequence number returns
to 1.
 File size: The file size of image or video clip transmitted to the network storage location
can’t over 50MB.
 Recording time: Set the period when the periodical recording is effective.
Always:
The periodical recording is always effective.
Schedule: You can specify the period when the periodical recording is effective in the
Schedule setting in the other section.
Note: You can set schedule function at schedule screen. (Please go “Setting → Advanced
→ Schedule → Setting”) For more details, you can check Chapter 9.9.
9.7.3 Backup
 Save to Memory Card: Click check box to save files to memory card when FTP or
network storage shutdown.
Setting-Advanced
Memory Card
76
F7110 / F7115 User Manual
9.8 HTTP Event
Set up this menu for sending commands to an HTTP server. By using HTTP client function,
you can send the command defined by yourself, linked with the external sensor input or with
the built-in motion detection function to HTTP server. HTTP client setting menu is
composed of two tabs, General and Alarm sending.
9.7.1 General
 HTTP event: Set up the HTTP server URL, port, User ID, Password, and Proxy server
settings.
For example: URL: 192.168.1.7/cgi-bin/operator/ptzset
Note: The setting of URL should be the same as CGI.
Setting-Advanced
HTTP Event
77
F7110 / F7115 User Manual
9.7.2 Alarm sending
Set to send the command with connection to the alarm detection by the external sensor input
or by the built-in motion detection function. Select “On“ to send the image and audio file to
HTTP server linked with the alarm detection.
Alarm sending: Select On to set to send command with connection to the alarm detection.
 Alarm
Motion
Detection: Click it on for using Motion Detection function as a sensor. You
can set motion detection function at the motion detection function screen.
Note: You can set motion detection at motion detection screen. (Please go “Setting →
Advanced → Motion detection → Setting”) For more details, you can check Chapter 9.12.
Setting-Advanced
HTTP Event
78
F7110 / F7115 User Manual

Parameter: the parameter of CGI (defined in URL of HTTP → General) is
from your target device. For example, move=down.

Message: message will show up in the form of Message = PTZ down. If your
target device didn’t support the parameter of message, you can’t see the
message. So you can just take the message as a note. For example: PTZ
down.
 Audio
Detection: Click it on for using Audio detection function as a sensor. You can
set audio detection function at the audio detection function screen.
Note: You can set audio detection at audio detection screen. (Please go “Setting →
Advanced →Audio detection → Setting”)

For more details, you can check Chapter 9.13.
Parameter: the parameter of CGI (defined in URL of HTTP → General) is
from your target device. For example, move=down.

Message: message will show up in the form of Message = PTZ down. If your
target device didn’t support the parameter of message, you can’t see the
message. So you can just take the message as a note. For example: PTZ
down.
 Network
Link Down: Click it on to receive a snapshot or a video clip while network
link down. If Attached file type (go “Setting → Advanced → FTP client → General”)
was clicked as video clip, you can using Alarm buffer function as a sensor. It’s for
recording audio file in the IP CAM before and after disconnected network.
Note: You can set alarm buffer at alarm buffer screen. (Please go “Setting → Advanced →
Alarm Buffer → Setting”)
Setting-Advanced
HTTP Event
For more details, you can check Chapter 9.11.
79
F7110 / F7115 User Manual

Parameter: the parameter of CGI (defined in URL of HTTP → General) is
from your target device. For example, move=down.

Message: message will show up in the form of Message = PTZ down. If your
target device didn’t support the parameter of message, you can’t see the
message. So you can just take the message as a note. For example: PTZ
down.
 Alarm
Input: Select the connected alarm. Sensor input 1: The external sensor which
is connected to sensor input1 of the alarm input.
Note: You can set the alarm input function at alarm input screen. (Please go “Setting →
Advanced → Alarm Input → Setting”). For more details, you can check Chapter 9.10.

Parameter: the parameter of CGI (defined in URL of HTTP → General) is
from your target device. For example, move=down.
Setting-Advanced
HTTP Event
80
F7110 / F7115 User Manual

Message: message will show up in the form of Message = PTZ down. If your
target device didn’t support the parameter of message, you can’t see the
message. So you can just take the message as a note. For example: PTZ
down.
 Effective Period: Set the period when the periodical sending is effective.
Always:
The periodical sending is always effective.
Schedule:
You can specify the period when the periodical sending is effective in the
schedule setting in the other section.
Note: You can set schedule function at schedule screen. (Please go “Setting → Advanced
→ Schedule → Setting”) For more details, you can check Chapter 9.9.
Setting-Advanced
HTTP Event
81
F7110 / F7115 User Manual
9.8 Alarm Output
You can set Alarm Output function in this menu to control the alarm out of I / O port on the
rear of the device linked to the alarm detection and the timer.
 Alarm Output: To activate Alarm output 1/2 function, select On. If not, select Off.
 Digital Output: Select High signal output and Low signal output as your alarm.
 Trigger Condition: Select the mode of the Alarm output function. You can choose
“Alarm” or “Timer”.
 Alarm: Controls alarm output by synchronizing with an external sensor input or the built-in
activity detection function.
 Motion
Detection: Click it on for using Motion Detection function as a sensor. You
can set motion detection function at the motion detection function screen.
Note: You can set motion detection at motion detection screen. (Please go “Setting →
Advanced → Motion Detection → Setting”) For more details, you can check Chapter 9.12.
 Audio
detection: Click it on for using Audio Detection function as a sensor. You can
set audio detection function at the audio detection function screen.
Note: You can set audio detection at audio detection screen. (Please go “Setting →
Advanced →Audio Detection → Setting”)
 Use
For more details, you can check Chapter 9.13.
Alarm Buffer: Click it on to use alarm buffer function for recording audio and
video file before and after disconnected network.
Note: You can set alarm buffer at alarm buffer screen. (Please go “Setting → Advanced
→ Alarm Buffer → Setting”)
 Alarm
For more details, you can check Chapter 9.11.
Input: Select the connected alarm. Sensor Input: The external sensor which
is connected to sensor input1 of the alarm input.
Setting-Advanced
Alarm Output
82
F7110 / F7115 User Manual
Note: You can set the alarm input function at alarm input screen. (Please go “Setting →
Advanced → Alarm Input → Setting”) For more details, you can check Chapter 9.10.
 Alarm Duration: There are up to 60 second options to choose for alarm duration interval.
 Effective Period: Set the period when the periodical sending is effective.
Always: The periodical sending is always effective.
Schedule: You can specify the period when the periodical sending is effective in the
Schedule setting in the other section.
Note: You can set schedule function at schedule screen. (Please go “Setting → Advanced
→ Schedule → Setting”)
Setting-Advanced
Alarm Output
For more details, you can check Chapter 9.9.
83
F7110 / F7115 User Manual
9.9 Schedule
Click Schedule on the Advanced mode menu, the Schedule setting menu appears. This is the
same menu as the setting menu which is displayed when you click Schedule to set Effective
period and Schedule in FTP client, e-Mail (SMTP), HTTP event, Record, and Alarm out
setting menu setting menu.
 Schedule Selection: Select the list box to specify the schedule you want to set.
FTP -Alarm / FTP – Periodical / E-mail (SMTP) -Alarm / E-mail
(SMTP) –Periodical / HTTP Event -Alarm / Record –Alarm /
Record –Periodical / Alarm Output- Alarm – 1 / Alarm Output- Timer – 1 /
Alarm Output- Alarm – 2 / Alarm Output- Timer – 2 / Memory Card Alarm /
Memory Card Periodical / PT/PTZ Alarm / HTTP Event Alarm
 Mon (Monday) to Sun (Sunday): The time period on the right of the checked day is the
effective period of the schedule.
 Start Time, End Time: Specify the Start Time and the End Time.
 Use the same time schedule every day: When this is checked, the Start Time and End
Time set to Mon (Monday) are applied to all days. In this case, the Start Time and End
Time of the other days than Mon (Monday) cannot be input.
Setting-Advanced
Schedule
84
F7110 / F7115 User Manual
9.10 Alarm Input
When you click Alarm Input on the Advanced mode menu, the Alarm Input setting menu
appears. You can set in this menu to control the external alarm input of I / O port on the rear of
the device linked to FTP, SMTP, HTTP Sending Function, Network Storage and Memory
Card.

Alarm Input 1/2: Click it on for using external sensor which is connected to sensor
input1 of the camera I / O port.

Trigger Condition: Select High signal output and Low signal output as your alarm.
Setting-Advanced
Alarm Input
85
F7110 / F7115 User Manual
9.11 Alarm Buffer
When you click Alarm Buffer on the Advanced mode menu, the Alarm buffer setting menu
appears. You can set in this menu to enable alarm buffer function connected with FTP Client,
SMTP, Network Storage, Memory Card, HTTP Event, Alarm Output and so on.
Click it on to use alarm buffer function for recording audio and video file in the of IP Camera
before and after disconnected network. After re-connecting, these files will transmit to FTP
client, SMTP, Network storage, Memory Card, HTTP event, or Alarm output. You can
set the pre-alarm and post-alarm period up to 5 seconds in Alarm Buffer function screen.
Setting-Advanced
Alarm Buffer
86
F7110 / F7115 User Manual
9.12 Motion Detection
There are three Motion Detection functions as sensors to set for different detecting zones.
Each one has Threshold and Sensitivity inputs which you can adjust to specific zone
sequentially. Motion Detection function can support to FTP Client, SMTP, Network
Storage, Memory Card, HTTP Event, Alarm Output and so on.
 Threshold: It means the extent which the alarm will be triggered. The default value is 50
and the value range is 0~100.
 Sensitivity: It means that how often the sensor will scan the image different. The higher
sensitivity it is and the more frequently it scans. The default value is 50 and the value
range is 0~100.
Motion
Detection 1: Click it on for using Motion Detection 1 function as a sensor.
You can adjust and move the detecting zone by using mouse.
Motion Detection 2: Click it on for using Motion Detection 2 function as a sensor.
You can adjust and move the detecting zone by using mouse.
Motion Detection 3: Click it on for using Motion Detection 3 function as a sensor.
You can adjust and move the detecting zone by using mouse.
Setting-Advanced
Motion Detection
87
F7110 / F7115 User Manual
9.13 Audio Detection
The Audio detection has Threshold and Sensitivity inputs which you can adjust
sequentially. Audio Detection function can support to FTP Client, SMTP, Network
Storage, Memory Card, HTTP Event, Alarm Output and so on.
Click it on for using Audio Detection function as a sensor. You can set audio detection
function at the audio detection function screen.
 Threshold: It means the extent which the alarm will be triggered. The default value is 50
and the value range is 0~100.
 Sensitivity: It means that how often the sensor will scan the image different. The higher
sensitivity it is and the more frequently it scans. The default value is 5 and the value
range is 1~10.
Setting-Advanced
Audio Detection
88
F7110 / F7115 User Manual
9.14 System Log
The System Log function allows users to review any changes and events happened. The
system starts logging automatically after started.
 Enable Remote Log: Enables user to send the log data to a specified log server.
Setting-Advanced
System Log
89
F7110 / F7115 User Manual
CHAPTER 10. APPENDIX
A. Frame-rate and Bitrate Table – Help to set IPCamera with your network
environment to access Internet.
Base on your network upload environment to choose the suitable Image-Quality
setting. For example, if the network environment is ADSL 256Kb(upload) /
2Mb(download), the most fluent Image-Quality needs to set up under 256 Kb
situation.
A.1 Mega Mode
A.1.1. H.264 @ 15fps / kbps
Quality
1280*1024
Excellent
1500
Detailed
400
Good
250
Standard
100
Medium
80
1280*720
1200
250
100
60
50
640*480
180
100
80
50
40
320*240
50
30
20
15
10
A.1.2. H.264 @ 10fps / kbps
Quality
1280*1024
Excellent
1000
Detailed
280
Good
170
Standard
70
Medium
55
1280*720
800
100
70
40
30
640*480
120
70
55
30
20
320*240
30
20
15
10
A.1.3. H.264 / kbps, fps
Image-Size
Bitrate Setting
1280*1024
1280*1024
1280*1024
1280*1024
1280*1024
1280*1024
1280*720
1280*720
1280*720
1280*720
1280*720
1280*720
6144
6144
2048
2048
512
512
6144
6144
2048
2048
512
512
Frame-Rate
Setting
15
10
15
10
15
10
15
10
15
10
15
10
90
Current Bitrate
6300
6300
2200
2200
550
550
6300
6300
2200
2200
550
550
Current
Frame-Rate
15
10
15
10
15
10
15
10
15
10
15
10
F7110 / F7115 User Manual
640*480
640*480
640*480
640*480
640*480
640*480
320*240
320*240
320*240
320*240
320*240
320*240
6144
6144
2048
2048
512
512
6144
6144
2048
2048
512
512
15
10
15
10
15
10
15
10
15
10
15
10
6300
6300
2200
2200
550
550
5100
3600
2200
2200
550
550
15
10
15
10
15
15
15
10
15
10
15
10
A.1.4. MPEG 4@ 15fps / kbps
Quality
1280*1024
Excellent
2700
Detailed
1100
Good
500
Standard
350
Medium
300
1280*720
2000
800
350
250
200
640*480
300
200
150
100
80
320*240
100
80
60
40
35
A.1.5. MPEG4@ 10fps / kbps
Quality
1280*1024
Excellent
1800
Detailed
800
Good
350
Standard
250
Medium
200
1280*720
1400
550
250
180
140
640*480
200
120
100
80
60
320*240
80
60
40
30
25
A.1.6. MPEG4 / kbps, fps
Image-Size
Quality Setting
1280*1024
1280*1024
1280*1024
1280*1024
1280*1024
1280*1024
1280*720
1280*720
1280*720
1280*720
1280*720
1280*720
640*480
640*480
640*480
640*480
6144
6144
2048
2048
512
512
6144
6144
2048
2048
512
512
6144
6144
2048
2048
Frame-Rate
Setting
15
10
15
10
15
10
15
10
15
10
15
10
15
10
15
10
91
Current Bitrate
5500
6300
2200
2200
550
550
6300
6300
2200
2200
550
550
6300
6300
2200
2200
Current
Frame-Rate
13
10
15
10
15
10
15
10
15
10
15
10
15
10
15
10
F7110 / F7115 User Manual
640*480
640*480
320*240
320*240
320*240
320*240
320*240
320*240
512
512
6144
6144
2048
2048
512
512
15
10
15
10
15
10
15
10
550
550
2200
1800
2200
1800
550
550
15
10
15
10
15
10
15
10
A.1.7. MJPEG @ 15fps / kbps
Quality
1280*1024
Excellent
22000
Detailed
12000
Good
7000
Standard
5500
Medium
4000
1280*720
16000
7000
5000
4000
3000
640*480
6000
3000
2500
2000
1200
320*240
2200
1200
1000
800
500
A.1.8. MJPEG@ 10fps / kbps
Quality
1280*1024
Excellent
15000
Detailed
8000
Good
5000
Standard
4000
Medium
3000
1280*720
11000
5000
3500
3000
2000
640*480
4000
2000
1800
1500
800
320*240
1500
800
700
600
350
A.1.9. MJPEG / kbps, fps
Image-Size
Quality Setting
1280*1024
1280*1024
1280*1024
1280*1024
1280*1024
1280*1024
1280*720
1280*720
1280*720
1280*720
1280*720
1280*720
640*480
640*480
640*480
640*480
640*480
640*480
320*240
320*240
Excellent
Excellent
Good
Good
Medium
Medium
Excellent
Excellent
Good
Good
Medium
Medium
Excellent
Excellent
Good
Good
Medium
Medium
Excellent
Excellent
Frame-Rate
Setting
15
10
15
10
15
10
15
10
15
10
15
10
15
10
15
10
15
10
15
10
92
Current Bitrate
22000
15000
7000
5000
4000
3000
16000
11000
5000
3500
3000
2000
6000
4000
2500
1800
1200
800
2200
1500
Current
Frame-Rate
15
10
15
10
15
10
15
10
15
10
15
10
15
10
15
10
15
10
15
10
F7110 / F7115 User Manual
320*240
320*240
320*240
320*240
Good
Good
Medium
Medium
15
10
15
10
1000
700
500
350
15
10
15
10
A.2 VGA Mode
A.2.1 H.264 @ 30fps / kbps
Quality
Excellent
Detailed
Good
Standard
Medium
640*480
600
120
60
50
40
320*240
60
40
30
25
20
A.2.2 H.264@15 fps / kbps
Quality
Excellent
Detailed
Good
Standard
Medium
640*480
400
80
40
30
25
320*240
40
30
25
20
15
A.2.3 H.264 / kbps, fps
Image-Size
Bitrate Setting
640*480
640*480
640*480
640*480
640*480
640*480
320*240
320*240
320*240
320*240
320*240
320*240
6144
6144
2048
2048
512
512
6144
6144
2048
2048
512
512
A.2.4 MPEG4 @ 30fps / kbps
Quality
Excellent
Detailed
Good
Standard
Medium
Frame-Rate
Setting
30
15
30
15
30
15
30
15
30
15
30
15
640*480
1000
400
200
150
120
93
Current Bitrate
6300
6300
2200
2200
550
550
6300
5500
2200
2200
550
550
Current
Frame-Rate
30
15
30
15
30
15
30
15
30
15
30
15
320*240
120
80
60
50
40
F7110 / F7115 User Manual
A.2.5 MPEG4@ 15fps / kbps
Quality
Excellent
Detailed
Good
Standard
Medium
640*480
600
250
150
100
80
320*240
80
50
40
30
20
A.2.6 MPEG4 / kbps, fps
Image-Size
Bitrate Setting
640*480
640*480
640*480
640*480
640*480
640*480
320*240
320*240
320*240
320*240
320*240
320*240
6144
6144
2048
2048
512
512
6144
6144
2048
2048
512
512
Frame-Rate
Setting
30
15
30
15
30
15
30
15
30
15
30
15
Current Bitrate
6300
6300
2200
2200
550
550
5100
2800
2200
2200
550
550
Current
Frame-Rate
30
15
30
15
30
15
30
15
30
15
30
15
A.2.7 MJPEG @ 30fps / kbps
Quality
Excellent
Detailed
Good
Standard
Medium
640*480
13000
6500
5000
4000
2500
320*240
4500
2500
2000
1600
1000
A.2.8 MJPEG@ 15fps / kbps
Quality
Excellent
Detailed
Good
Standard
Medium
640*480
7000
3500
2800
2100
1400
320*240
2500
1500
1200
1000
700
A.2.9 MJPEG / kbps, fps
Image-Size
Bitrate Setting
640*480
640*480
640*480
640*480
Excellent
Excellent
Good
Good
Frame-Rate
Setting
30
15
30
15
94
Current Bitrate
13000
7000
5000
2800
Current
Frame-Rate
30
15
30
15
F7110 / F7115 User Manual
640*480
640*480
320*240
320*240
320*240
320*240
320*240
320*240
Medium
Medium
Excellent
Excellent
Good
Good
Medium
Medium
30
15
30
15
30
15
30
15
95
2500
1400
4500
2500
2000
1200
1000
700
30
15
30
15
30
15
30
15
F7110 / F7115 User Manual
B. Storage Requirement Table - Help to set Recording Storage System.
Please refer to the following table to find out the capability for recording into your
hard disk.
B.1 Mega Mode
B.1.1 H.264 Storage Requirement GB / channel / day @ 15fps
Quality
1280*1024
1280*720
640*480
Excellent
15
12
1.8
Detailed
2.5
Good
2.5
0.8
Standard
0.6
0.5
Medium
0.8
0.5
0.4
320*240
0.5
0.3
0.2
0.15
0.1
B.1.2 H.264 Storage Requirement GB / channel / day @ 10fps
Quality
1280*1024
1280*720
640*480
Excellent
10
1.2
Detailed
2.8
0.7
Good
1.7
0.7
0.55
Standard
0.7
0.4
0.3
Medium
0.55
0.3
0.2
320*240
0.3
0.2
0.15
0.1
0.08
B.1.3 MPEG4 Storage Requirement GB / channel / day
Image-Size
Bitrate Setting
Frame-Rate Setting Storage Requirement
1280*1024
6144
15
63
1280*1024
6144
10
63
1280*1024
2048
15
22
1280*1024
2048
10
22
1280*1024
512
15
5.5
1280*1024
512
10
5.5
1280*720
6144
15
63
1280*720
6144
10
63
1280*720
2048
15
22
1280*720
2048
10
22
1280*720
512
15
5.5
1280*720
512
10
5.5
640*480
6144
15
63
640*480
6144
10
63
640*480
2048
15
22
640*480
2048
10
22
640*480
512
15
5.5
640*480
512
10
5.5
320*240
6144
15
51
320*240
6144
10
36
96
F7110 / F7115 User Manual
320*240
320*240
320*240
320*240
2048
2048
512
512
15
10
15
10
22
22
5.5
5.5
B.1.4 MPEG4 Storage Requirement GB / channel / day @ 15fps
Quality
1280*1024
1280*720
640*480
Excellent
27
20
Detailed
11
Good
3.5
1.5
Standard
3.5
2.5
Medium
0.8
320*240
0.8
0.6
0.4
0.35
B.1.5 MPEG4 Storage Requirement GB / channel / day @ 10fps
Quality
1280*1024
1280*720
640*480
Excellent
18
14
Detailed
5.5
1.2
Good
3.5
2.5
Standard
2.5
1.8
0.8
Medium
1.4
0.6
320*240
0.8
0.6
0.4
0.3
0.25
B.1.6 MPEG4 Storage Requirement GB / channel / day
Image-Size
Quality Setting
Frame-Rate Setting Storage Requirement
1280*1024
6144
15
55
1280*1024
6144
10
63
1280*1024
2048
15
22
1280*1024
2048
10
22
1280*1024
512
15
5.5
1280*1024
512
10
5.5
1280*720
6144
15
63
1280*720
6144
10
63
1280*720
2048
15
22
1280*720
2048
10
22
1280*720
512
15
5.5
1280*720
512
10
5.5
640*480
6144
15
63
640*480
6144
10
63
640*480
2048
15
22
640*480
2048
10
22
640*480
512
15
5.5
640*480
512
10
5.5
320*240
6144
15
22
320*240
6144
10
18
320*240
2048
15
22
320*240
2048
10
18
320*240
512
15
5.5
320*240
512
10
5.5
97
F7110 / F7115 User Manual
B.2 VGA Mode
B.2.1. H.264 Storage Requirement GB / channel / day @ 30fps
Quality
640*480
Excellent
2.5
Detailed
1.2
Good
0.6
Standard
0.5
Medium
0.4
320*240
0.6
0.4
0.3
0.25
0.2
B.2.2. H.264 Storage Requirement GB / channel / day @ 15fps
Quality
640*480
Excellent
1.5
Detailed
0.8
Good
0.4
Standard
0.3
Medium
0.25
320*240
0.4
0.3
0.25
0.2
0.15
B.2.3. H.264 Storage Requirement GB / channel / day
Frame-Rate
Image-Size
Bitrate Setting
Setting
640*480
6144
30
640*480
6144
15
640*480
2048
30
640*480
2048
15
640*480
512
30
640*480
512
15
320*240
6144
30
320*240
6144
15
320*240
2048
30
320*240
2048
15
320*240
512
30
320*240
512
15
Current Bitrate
6300
6300
2200
2200
550
550
6300
5500
2200
2200
550
550
Storage
Requirement
63
63
22
22
5.5
5.5
63
55
22
22
5.5
5.5
B.2.4. MPEG4 Storage Requirement GB / channel / day @ 30fps
Quality
640*480
Excellent
Detailed
Good
Standard
1.5
Medium
1.2
320*240
1.2
0.8
0.6
0.5
0.4
B.2.5. MPEG4 Storage Requirement GB / channel / day @ 15fps
Quality
640*480
Excellent
Detailed
Good
1.5
Standard
320*240
0.8
0.5
0.4
0.3
98
F7110 / F7115 User Manual
Medium
0.8
B.2.6. MJPEG Storage Requirement GB / channel / day
Frame-Rate
Image-Size
Bitrate Setting
Setting
640*480
6144
30
640*480
6144
15
640*480
2048
30
640*480
2048
15
640*480
512
30
640*480
512
15
320*240
6144
30
320*240
6144
15
320*240
2048
30
320*240
2048
15
320*240
512
30
320*240
512
15
99
0.2
Current Bitrate
6300
6300
2200
2200
550
550
5100
2800
2200
2200
550
550
Storage
Requirement
63
63
22
22
5.5
5.5
51
28
22
22
5.5
5.5
F7110 / F7115 User Manual
C. System Requirement – Help to setup System
C.1. 16 Channel IPCamera with CIF Performance
Equipment Configuration
Software:
MainConsole Version 2.6.4 Professional
CPU:
Intel Core 2 Quad Q6600 @ 2400 MHz
Memory:
1024 MB (2 x 512 DDR2-SDRAM )
Ethernet:
Marvell Yukon 88E8052 PCI-E ASF Gigabit Ethernet Controller
Hard Disk:
ST3250620A (250 GB)
Graphic card:
ATI Technologies Inc Radeon X1300 Series
Operating System:
Windows XP Professional SP2
Results from Test with a Resolution of 352×240
320x240
16 IP camera
16 IP camera
Quality
Good
Excellent
Frame Rate
20
20
CPU Load
65%
67%
Bandwidth
40~50 Mbps
40~50 Mbps
C.2. 16 Channel IPCamera with D1 Performance
Equipment Configuration
Software:
MainConsole Version 2.6.4 Professional
CPU:
AMD Athlon 64*2 @3600+MHz
Memory:
2048 MB (2 x 1024 DDR2-SDRAM )
Ethernet:
VIA Rhine II Fast Ethernet Adapter
Hard Disk:
ST3250620A (250 GB)
Graphic card:
ATI Technologies Inc EAX1600 Series
Operating System:
Windows XP Professional SP2 x64
Results from Test with a Resolution of 704×480 CCD IPCamera
704x480
16 IP camera
Quality
Excellent
Frame Rate
30
CPU Load
95%
Bandwidth
15~20 Mbps
Results from Test with a Resolution of 640×480 CMOS IPCamera
640x480
16 IP camera
Quality
Excellent
Frame Rate
30
100
CPU Load
95%
Bandwidth
10~15 Mbps
F7110 / F7115 User Manual
Europe – EU Declaration of Conformity
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The
following test methods have been applied in order to prove presumption of conformity with the
essential requirements of the R&TTE Directive 1999/5/EC:
Clause
EN 60950-1: 2001
EN 50392: 2004
EN 300 328 V1.6.1 (2004-11)
EN 301 489-17 V1.2.1
(2002-08) and EN 301 489-1
V1.5.1 (2004-11)
Description
Safety of Information Technology Equipment
Generic standard to demonstrate the compliance of electronic and electrical
apparatus with the basic restrictions related to human exposure to
electromagnetic fields (0 Hz - 300 GHz)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband
transmission systems; Data transmission equipment operating in the 2,4 GHz
ISM band and using wide band modulation techniques; Harmonized EN
covering essential requirements under article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and
services; Part 17: Specific conditions for 2,4 GHz wideband transmission
systems and 5 GHz high performance RLAN equipment
This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU
member states and EFTA countries, except in France and Italy where restrictive use applies.
In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain
authorization to use the device for setting up outdoor radio links and/or for supplying public access
to telecommunications and/or network services.
This device may not be used for setting up outdoor radio links in France and in some areas the RF
output power may be limited to 10 mW EIRP in the frequency range of 2454 – 2483.5 MHz. For
detailed information the end-user should contact the national spectrum authority in France.
Česky
[Czech]
[Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky
a dalšími příslušnými ustanoveními směrnice 1999/5/ES.
Dansk
[Danish]
Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr [udstyrets
typebetegnelse] overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Deutsch
[German]
Hiermit erklärt [Name des Herstellers], dass sich das Gerät [Gerätetyp] in Übereinstimmung
mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der
Richtlinie 1999/5/EG befindet.
Eesti
[Estonian]
Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tüüp = type of
equipment] vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele
teistele asjakohastele sätetele.
101
F7110 / F7115 User Manual
English
Hereby, [name of manufacturer], declares that this [type of equipment] is in compliance with
the essential requirements and other relevant provisions of Directive 1999/5/EC.
Español
[Spanish]
Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con
los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva
1999/5/CE.
Ελληνική
[Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ [name of manufacturer] ΔΗΛΩΝΕΙ ΟΤΙ [type of equipment]
ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ
ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Français
[French]
Par la présente [nom du fabricant] déclare que l'appareil [type d'appareil] est conforme aux
exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Italiano
[Italian]
Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] è conforme ai
requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latviski
[Latvian]
Ar šo [name of manufacturer / izgatavotāja nosaukums] deklarē, ka [type of equipment /
iekārtas tips] atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem
noteikumiem.
Lietuvių
[Lithuanian]
Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius reikalavimus
ir kitas 1999/5/EB Direktyvos nuostatas.
Nederlands
[Dutch]
Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming
is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Malti
[Maltese]
Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma
mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Magyar
[Hungarian]
Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó alapvetõ
követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Polski
[Polish]
Niniejszym [nazwa producenta] oświadcza, że [nazwa wyrobu] jest zgodny z zasadniczymi
wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
Português
[Portuguese]
[Nome do fabricante] declara que este [tipo de equipamento] está conforme com os requisitos
essenciais e outras disposições da Directiva 1999/5/CE.
Slovensko
[Slovenian]
[Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi
relevantnimi določili direktive 1999/5/ES.
Slovensky
[Slovak]
[Meno výrobcu] týmto vyhlasuje, že [typ zariadenia] spĺňa základné požiadavky a všetky
príslušné ustanovenia Smernice 1999/5/ES.
Suomi
[Finnish]
[Valmistaja = manufacturer] vakuuttaa täten että [type of equipment = laitteen tyyppimerkintä]
tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin
muiden ehtojen mukainen.
Svenska
[Swedish]
Härmed intygar [företag] att denna [utrustningstyp] står I överensstämmelse med de väsentliga
egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
102
F7110 / F7115 User Manual
Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
 Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to
channels 1 through 11.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
103

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : admin
Company                         : CMT
Create Date                     : 2010:09:23 19:30:10+08:00
Modify Date                     : 2010:09:23 19:32:57+08:00
Source Modified                 : D:20100923112042
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : Acrobat PDFMaker 9.0 Word 版
Metadata Date                   : 2010:09:23 19:32:57+08:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Format                          : application/pdf
Creator                         : admin
Title                           : Hardware User Manual
Document ID                     : uuid:6e7358a2-66fe-472a-8c2c-af5e2e7f41c3
Instance ID                     : uuid:21a547a5-5c50-489b-b658-1695a81df67a
Subject                         : 2
Page Layout                     : OneColumn
Page Count                      : 106
EXIF Metadata provided by EXIF.tools
FCC ID Filing: WOR-5117F

Navigation menu