ZENITH TV/VCR Or DVD Combo Manual 97090029

User Manual: ZENITH ZENITH TV/VCR or DVD Combo Manual ZENITH TV/VCR or DVD Combo Owner's Manual, ZENITH TV/VCR or DVD Combo installation guides

Open the PDF directly: View PDF PDF.
Page Count: 31

DownloadZENITH  TV/VCR Or DVD Combo Manual 97090029
Open PDF In BrowserView PDF
Operating Guide
& Warranty

• • • o o,l=,loo°o°aoQ°ooooooollo°jol,=,,°lI,olooQJloeoo====oooooo°°D°,

,-

o°

.....""":':'::::::!:i:!!!iii!iiiii!iii!iii!i!i!i!i!i!!iii.i..

13" ColorTV/VCR

Combination

SRV1320S

VVARNING:
TO REDUCE THE Kl3_ t_l Hkt: _1< l:l.Lt. | F,i(
MOISTURE.

1)() NOI EXPOSE THIS APPLIANCE

NIIt)LK,

TO RAIN OR

L

THIS

SYMBOL

GEROUS

INDICATES

VOLTAGE

RISK OF ELECTRIC
WITHIN

THIS

THIS

SYMBOL

THERE

ARE

SERVICING
NEL.

IN THE LITERATURE
THE APPLIANCE.

The caution

TO REDUCE

TO

THE RISK

QUALIFIED

marking is located

OF ELECTRIC

SERVICE

AND

PERSON-

DAN-

SHOCK

A

IS PRESENT

UNIT.

SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER
SERVICEABLE
PARTS
INSIDE.
REFER

-CAUTION:

THAT

CONSTITUTING

INDICATES

IMPORTANT

MAINTENANCE

THAT

OPERATING
INSTRUCTIONS

ACCOMPANYING

on the rear of the cabinet.

IMPORTANT

SAFEGUARDS
Quick stops, excessive force, and uneven surfaces may
cause the appliance and cart combination to overturn.

1. Read instructions-All the safety and operating instructions should be read before the appliance is operated.
2. Retain Instructions-The safety and operating instructions should be retained for future reference.
3. Heed Warnings-All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions-All operating and use instructions
should be followed.
5. Cleaning-Unplug TVNCR from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
EXCEPTION : A product that is meant for uninterrupted service and, that for some specific reason, such as
the possibility of the loss of an authorization code for a
CATV converter, is not intended to be unplugged by the
user for cleaning or any other purpose, may exclude the
reference to unplugging the appliance in the cleaning
description otherwise required in item 5.
6. Attachments-Do not use attachments not recommended
by the TV/VCR manufacturer as they may cause hazards.
7. Water and Moisture-Do not use this TVNCR near
water-for example, near a bath tub, wash bowl, kitchen
sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
8. Accessories-Do not place this TVNCR on an unstable
cart, stand, tripod, bracket, or table. The TV/VCR may
fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod,
bracket, or table recommended
by the manufacturer, or sold with PORTABLE CART WARNING
the TV/VCR. Any mounting of
the appliance should follow the
manufacturer's instructions and
should use a mounting accessory
recommended by the manufacturer. An appliance and cart combination should be moved with
care.

-2-

9,

Ventilation-Slots
and openings in the cabinet and the
back or bottom are provided for ventilation and to ensure
reliable operation of the TV/VCR and to protect it from
overheating, these openings must not be blocked or covered. The openings should never be blocked by placing
the TV/VCR on a bed, sofa, rug, or other similar surface.
This TV/VCR should never be placed near or over a
radiator or heat register. This TV/VCR should not be
placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instructions have been adhered to.

10. Power Sources-This TVNCR should be operated only
from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to
your home, consult your appliance dealer or local power
company. For TVNCRs intended to operate from battery
power, or other sources, refer to the operating instructions.
11. Grounding or Polarization-This TV/VCR is equipped
with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety feature. If
you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
12. Power-Cord Protection-Power-supply
cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

EN
5L01

EXAMPLE

UP ANTENNA

NATIONAL

GROUNUING

ELECTRICAL

AS PER

CODE
ANTENNA
LEAD IN
WIRE

ANTENNA
DISCHARGE

UNIT

(NEC SECTION

- GROUNDING

CONDUCTORS

(NEC SECTION
GROUND
NEC - NATIONAL

ELECTRICAL

CODE
."_'-=_1-"--"

$2898A

810-20)

810-21)

CLAMPS

POWER SERVICE GROUNDING
ELECTRODE
SYSTEM
(NEC ART 250,

PART H)

19. Damage Requiring
Service-Unplug
this TV/VCR from
the wall outlet and refer servicing
to qualified
service
personnel under the following
conditions:
a. When the power-supply
cord or plug is damaged or

13. Outdoor Antenna grounding-If an outside antenna or
cable system is connected to the TV/VCR, be sure the
antenna or cable system is grounded so as to provide some
protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code,
ANSI/NFPA No. 70, provides information with respect to
proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)

flayed.
b. If liquid has been spilled,
TV/VCR.
c.

If the TVNCR

or objects

has been exposed

have fallen

into the

to rain or water.

d. If the TV/VCR does not operate normally by following
the operating instructions.
Adjust only those controls that
are covered
by the operating
instructions,
as improper
adjustment of other controls may result in damage and will
often require extensive
work by a qualified technician to
restore the TV/VCR to its normal operation.
e. If the TVNCR
has been dropped or damaged in any way.

14. Lightning-For added protection for this TV/VCR receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the TV/VCR due to lightning
and power-line surges.

f.

15. Power Lines-An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact with
them might be fatal.

When the TV/VCR
ance-this indicates

exhibits a distinct
a need for service.

20. Replacement
Parts-When
quired, be sure the service

change

in perform-

replacement
parts are retechnician
has used replace-

ment parts specified by the manufacturer
that have the
same characteristics
as the original part. Unauthorized
substitutions
may result in fire, electric shock, injury to
persons
21. Safety
to this
routine
proper

16. Overloading-Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry-Never push objects of any kind
into this TV/VCR through openings as they may touch
dangerous vokage points or short out parts that could
result in a fire or electric shock. Never spill liquid of any
kind on the TVNCR.

or other hazards.
Cheek-Upon
completion of any service or repairs
TVNCR,
ask the service technician to perform
safety checks to determine that the TV/VCR is in
operating condition.

22. Heat-This
TV/VCR product should be situated away from
heat sources such as radiators,
heat registers,
stoves, or
other products (including amplifiers)
that produce heat.

18. Servicing-Do not attempt to service this TV/VCR yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.

- 3-

EN
5L01

For safe operation and satisfactory performance of your
unit, keep the following in mind when selecting a place
for its installation:
• Shield it from direct sunlight
sources of intense heat.

and keep it away from

• Avoid dusty or humid places.
• Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes
at the top and bottom of the unit. Do not place the
unit on a carpet because this will block the ventilation
holes.
• Install

unit in a horizontal

• Avoid

locations

subject

Do not pull on the power cord when disconnecting it
from an AC wall outlet. Grasp it by the plug.
If, by accident, water is spilled on your unit, unplug
the power cord immediately and take the unit to an
authorized Sears service center for servicing.
Do not put your fingers or objects into the TV/VCR
cassette holder.
Do not place anything directly on top of the unit.

position.
to strong vibration.

• Do not place the unit near strong magnetic
• Do not move
vice versa.

• Do not handle the power cord with wet hands.

fields.

the unit from a cold to a hot place or

Moisture condensation
may occur inside the unit when
it is moved from a cold place to a warm place, or after
heating a cold room or under conditions of high humidity. If a tape is played in a TV/VCR which has moisture,
it may damage the tape and TV/VCR. Therefore when
the condensation occurs inside the unit turn the POWER
button on and allow at least 2 hours for the unit to dry
out.

FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications
to this equipment may cause harmful interference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this equipment if an unauthorized change
or modification is made.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized recording or use of broadcast television programming, video tape, film or other copyrighted
material may violate applicable copyright laws. We assume no responsibility for the unauthorized duplication,
use, or other acts which infringe upon the rights of copyright owners.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
-4-

EN
6D11

•

IMPOR_ANI'

•

_'A_E_UARDS

I)RECAU_ONS

LOCATION

...........................

...................................................

2

4

..........................................................

4

AVOIDING THE HAZARDS OF ELECTRICAL
SHOCK AND FIRE ............................................. 4
WARNING ...........................................................
4
• FEATURES

..........................................................

• SUPPLIED ACCESSORIES

• TVOPERATION

...............................

6

7

• OPERA TING CONTROLS AND FUNCTIONS..

8

17

GAME MODE ....................................................

17

PICTURE CONTROL ........................................

17

CLOSED CAPTION SYSTEM .........................

18
19

• SPECIAL PLAYBACK .......................................

20

RENTAL PLAYBACK ......................................

20

REPEAT PLAYBACK .......................................

20

• SEARCH .............................................................

• PREPARATION FOR USE ...............................

10

CABLECONNECTIONS ..................................

10

17

• NORMAL PLAYBACK ......................................

6

• VIDEO CASSETTE .............................................

................................................

WATCHING A TV PROGRAM .......................

21

COUNTER MEMORY ......................................

21

TIME SEARCH ..................................................

21

• RECORDING .....................................................

22

INSTALLING THEBATTERIES ..................... 11

NORMAL RECORDING ..................................

22

EXTERNALINPUT

SKIPPING SOME MATERIALS DURING
RECORDING .....................................................

22

MODE ..............................

• PRESET FOR USE ............................................

II
12

PRESET FOR THE FIRST TIME .....................

12

DELETING (OR ADDING) PRESET
CHANNELS .......................................................

12

AUTO PRESET AGAIN ....................................

13

OTR (One Touch Recording) .............................
COPYING A VIDEO CASSETTE
(Requires another VCR) .....................................
• TIMER ................................................................

23
23
24

SELECTING DESIRED LANGUAGE ............ 13

AUTOMATIC TIMER RECORDING .............. 24

(AUTO / MANUAL) ..........................................

AUTO RETURN ................................................

26

SLEEP TIMER ...................................................

27

ALARM TIMER ................................................

27

14

• ON-SCREEN DISPLA Y ....................................

16

• SPECIAL FEATURES ......................................

16

DEGAUSSING ...................................................

16

AUTO REWIND-EJECT

16

...................................

• TROUBLESHOOTING
• MAINTENANCE

GUIDE .......................

28

...............................................

29

• SPECIFICATIONS ............................................

30

The serial number of this product is on the back of the unit. Each serial number is unique. You should record
this number and other vital information in this book and keep as a permanent record of your purchase in
the event of theft to aid in its identification.
m

....

Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
-5 -

EN
6DI1

• Infrared remote control
• Bilingual on-screen
English or Spanish

menu display selectable

in

• Real time counter-This shows the elapsed recording or playback time in hours, minutes, and seconds.
The "-" indicates that the tape is rewound further
than "0:00:00" on the tape counter.
• 181 channelcapability PLL frequency synthesizer
tuner with direct station call- (A converter may be
necessary to view scrambled cable channels.)
• Auto clock setting-Allows
you to use the clock
function from the PBS broadcast.

• Closed caption system-You may view specially
labeled (cc) TV programs, movies, news,
prerecorded tapes, etc. with either a dialogue caption
or text display added to the program.
• Game mode- Allows TV/VCR display to be
suitable for use with TV games.
• Auto power on system- (when a tape is inserted)
• Auto rewind when the end of a tape is reached(not in the case of timer recording).
• 2 Step picture search operation- You can view
a video program at a high speed or super high speed
in either a forward or reverse direction in either LP
or SLP mode.
• Still-"Freeze" the picture at any time for close
viewing of a particular scene. Only tapes recorded in
the SLP mode will show a fairly clear picture.

• Digital Auto Tracking (DTR)-Adjusts the tracking
automatically for each tape you play.
• Rental play mode- Improves
playback
quality of worn tapes, such as rental tapes.

picture

• Auto repeat-Allows you to repeat a tape indefinitely
without pressing the PLAY button.
• Time search- Allows you to set the TV/VCR to
advance the tape by entering the desired playback
time you want to skip.
• Three different tape speeds : SP/LP/SLP
• OTR (One Touch Recording)-Instant timed
recording from 30 to 480 minutes is possible at the
push of the REC/OTR button.
• 1 Year, 8 events (including Daily and Weekly
Timer Recording) The built-in timer allows you to
record up to 8 programs at different times on different
channels up to 1 year in advance. The Daily timer
allows recordings to be made of daily broadcasts.
The Weekly timer allows recording to be made once
a week until to the end of the tape is reached.
• Auto return-After finished timer recording, the
beginning of the recorded program(s)
can be
searched.
• Sleep timer-Allows
you to have the TV/VCR
automatically
turn off at a desired time.
• Alarm timer-Allows
you to have the TV/VCR
automatically
turn on at a desired time.

SUPPLIED ACCESSORIES
Remote Control Unit

PART NUMBER
(UREMT32SR018)

Dipole Antenna

Matching Adapter

PART NUMBER
(0EMN00723)

2 AA Batteries

PART NUMBER
(1813641,

1780103,

1780258)

If you need to replace these accessories, please refer to the PART NUMBER located under each illustration
and contact the Sears Parts Department to order.

-6-

EN
6Dll

_ JJ)I!,U

L.it,_3J_

Ji

i!,

"lhi.,, 1 V/VCR will operate wi|h ;All) cassette that has the VHS mark. For bcs! results,
high-quality
tapes. Please do NOT use poor quality or damaged tapes.

PRECA

UTIONS

INSERTING

• Avoid moisture. Moisture condensation
may occur
on the tape if it is moved from a cold place to a warm
place. When using a tape under these conditions, wait
until the tape has warmed to room temperature
and
the moisture has evaporated to avoid a damage to the
tape and your TV/VCR.
• Avoid exposure to extreme
magnetic fields.

heat, high humidity,

• Do not tamper with the cassette

DIFFFRENT

The TV/VCR

will automatically

turn on.

mechanism.

TAPE

CORRECT

SPEI_I)S

SP Mode:Standard Play
LP Mode:Long Play
SLP Mode: Super Long Play
The table below shows the maximum recording/playback time when using a T60, T 120, or T 160 tape in each
mode.
Recording/Playback

REMOVING

WRONG

A CASSETTE

1) In the Stop mode, press EJECT button on the remote
control
or press STOP/EJECT
button
on the
TV/VCR. The TV/VCR will eject the tape.
2) Pull the cassette out of the cassette
store in its case as shown.

compartment

and

Time

T60

T120

T160

SP mode

1 hour

2 hours

2-2/3 hours

LP mode

2 hours

4 hours

5-1/3 hours

SLP mode

3 hours

6 hours

8 hours

Type of tape

A CA SSETTE

and

Select the desired tape speed format before recording:

Tape Speed

the use ol

Insert the cassette in the direction as shown. Gently push
on the back center portion of the cassette continuously
until it is drawn into the TV/VCR.

• Do not touch the tape with your fingers.

THREE

wc recommend

ERASE

PREVENTION

Breaking off the plastic tab
from the back edge of the
cassette prevents accidental
erasure of your recording.

If you decide to record on ]
the tape again, simply cover [
the hole with tape.
]

Plastic Tape

- 7 -

EN
6Dll

_Jl LKAI

IfN_

_ON

KUL, b AJND i_ U_LliO_

- FRONT VIEW -

1 2 3

4 5 6 7 8 9

10

11 12

3

1 AUDIO input lack- Connects audio output jack of
your audioequipment or anotherVCR to theunit.

- REMOTE CONTROL VIEW -

2 VIDEO input jack- Connects video output jack of
your video camera or another VCR to the unit.
3 RECORD indicator-Flashes
during recording.
Lights up in the Stand-by mode for Timer Recording.
4 POWER button-Turns TV/VCR on and off. Press
to activate the Automatic Timer Recording mode.

5

5 STOP button Stops the tape.
EJECT button- Presswhile in the STOP modeto
remove a tape from the TV/VCR.

POWER

24
23

6 REWIND button- Rewinds the tape. Press during the
PLAY mode to view the picture rapidly in reverse.

SELECT

(D
ADD/
DELETE

7 PLAY button- Begins playback of a recording.
:
!

8 F.FWD button-Rapidly advances the tape. Press
during the PLAY mode to view the picture rapidly in
forward.

(D--

C.RESET :
),MEMORY

C>--

15

REC button- Begins manual

recording.

OTR button- Activates the One Touch
(located only on the TV/VCR unit)

10 VOLUME _
11 CHANNEL _

_REWlND

viewing

RECORO

buttonsbuttons-

Recording.

Adjusts the volume
Selects

level.

the channel

for

or recording.

PICTURE CONTROL function-Adjusts
the picture
control. This function is available only from the
remote control. (See page 17)
TRACKING +/- function- Minimizes
video 'noise'
(lines or dots on the screen)
(See page 19)

-8-

during

the Play mode.

EN
6D11

- REAR VIEW-

DIDIIUUUUUUHUUU
UUUUUUIUUU
1111111111
1 IIIIIIIIIIIII

25
12 EARPHONE jack- Connects earphones (not supplied) for personal listening. The size of jack is 1/8"
monaural (3.5mm).
13 Cassette compartment
14 NUMBER buttons- Selects desired channels for
viewing or recording. To select channels 1 to 9, press
the 0 and the desired channel.
÷100 button- Selects 100+ cable channels. To select
channel 125, first press the "+100" button and then
press "2" and "5".
15 ALARM button- Sets the time to have the TV/VCR
automatically turn on. (See page 27)
16 SPEED button- Sets desired
(SP/LP/SLP)

recording

speed.

20 C.MEMORY button- Turns counter memory on and
off. (See page 21)
21 ADD/DELETE button-Deletes
or adds channel
numbers in the Channel Set Up mode (See page 12).
Press to cancel a setting program (such as setting
clock or timer program) (See page 25)
NOTE: These functions are operative only during
the ON-SCREEN menu mode.
C.RESET button- Resets counter to 0:00:00.
22 SELECT button- When setting program (for
example: setting clock or timer program), press to
determine your selection and to proceed to the next
choice.
DISPLAY function-Displays
on the TV screen
either the counter or the current channel number and
current time. (See page 16)

17 PAUSE/STILL button- Used to temporarily stop the
tape during the recording or to view a still picture
during playback.
18 CHANNEL RETURN button-Toggles between the
current channel and the previously viewed channel.
19 SLEEP button- Sets the Sleep Timer. (See page 27)

23 MENU button-Displays
screen.

main menu on the TV

24 MUTE button- Mutes the sound. Press it again to
resume sound.
25 ANT. terminal- Connects to an antenna or CATV.

-9-

EN
61) I 1

VIII_/UttP

' COMBINIfl)

A N 11":NNA

q'he VHF/UHF Rod Antenna (supplied) is detachable.
Insert the stem of the antenna into the hole on the upperback portion of the TV/VCR.
Connect
the VHF/UHF
Rod Antenna or VHF/UHF
Combination
Antenna
to the ANT. terminal
of the
TV/VCR as shown in the diagram below.
For the best reception, fully extend the VHF/UHF
Anlenna and make the necessary adjustments.
(Avoid touching the top section when adjusting.)

Dipole Antenna(Supplied)

Rod

VItI,YUttP

SEPARA

i i_ AA i i_A_AA5

It is necessary

in some area to use an outdoor

antenna.

VHF Antenna

[

=_ UHF Antenna

VHF/UHF
1__

Combiner

I

I (Notsupplied)

_

Flat twin-lead

II
II

VHF/UHF Antenna
cable

CABLE WITHOUT CONVERTER/
DE-SCRAMBLER
BOX
Use this connection if your cable system connects
directly to your TV/VCR without a converter box.
By using this connection you can:
1) Use the TV/VCR remote to select channels
2) Program one or more unscrambled
Automatic Timer Recording.

channels for

From Cable System
NOTE

:

Before plugging the Rod antenna into antenna terminal,
check that the pin is not bent. If it is bent, straighten the
pin first before plugging the cable into antenna terminal.

Coaxial Cable
(not
suppli
75-ohm

_t____'_

,I,

Bent pin

ANT.@

(Needs to be straightened)

(Straight

pin)

Note to CATV system installer:
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected
to the grounding system of the building as close to the point of cable entry as practical.

-10-

EN
6DI 1

+,ABLE WITIt
CONVERTER/DE-SCRAMBLER

BOX

If your cable service supplies you with a converter
you can use the basic connection shown below.

box,

By using this connection you can record and view any
channel including scrambled channels. However, channel selection must be made using the converter box. This
means that channels
cannot be changed
using the
TV/VCR Remote Control. Unattended recording is
limited to one channel at a time.

TO RECORD
CHANNEL

1) Open the battery compartment cover by pressing the
cover on the remote unit in the direction of the arrow.
2) Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated by the polarity
(+1-) markings and replace the cover.

A SCRAMBLED/UNSCRAMBLED

I. Set the TVNCR channel selector to the output
channel for the Cable Converter Box. (Ex. CH3)
2. Select which channel
Converter Box.

to record from your Cable

Cable Box (not supplied)
From Cable
75-ohm
Coaxial

4_:c:__'_
Cable

(not supplied)

NOTE:

System

_
_

When using an external input signal (another VCR or
camcorder), connect the player's audio/video output
cables to the AUDIO IN,
VIDEO IN jacks on your
AUX
TV/VCR.
Then,
press
CHANNEL • or • button or
enter "00" so that "AUX"
screen appears.

II
_

:[,",I:,_I I

When using a cable converter box, you cannot
record one channel and view another.

- 11 -

EN
(_Dll

When first using the TV/VCR, you may want to select
language (English or Espafiol=Spanish)
and preset the
tuner to show only the channels you receive in your area.
You must use the remote control for the following
steps.
NOTE:

Channels that you no longer receive or seldom watch
can be deleted from the memory. (Of course, you can
add the deleted channels to the memory again.)

Channel memory programming
is not needed
when using a converter/de-scrambler
box.

1 Select "CHANNEL SET UP"

1 Plug the TV/VCR power

;-_

cord

_M_RR.0_.A_,NG
s.........
CART,O.
co_

Press MENU button to move to
"CHANNEL SET UP" and press
SELECT button.

PICTURE

U J

II

II

I

l

I

I

i

lJ

J

Jll

2 Select "ADDfDELETE
£N

I[

I

I

J]

J

[

3 Select "ENGLISH" or "ESPAI_iOL"
Select by using the CH • or •
button. "[ ]" indicate the selected
language.

UP

TIME SEARCH

2 Turn on the TVNCR

I

SET

USER'S
SET UP
LANGUAGE
ENGLISH]

into a standard AC outlet.

I

CONTROL

CHANNEL

f

CH"

Press MENU button to move to
"ADD/DELETE
CH" and press
SELECT button.

"W/CA'rV
AUTO

ADD / OELETE
II_

-sET0p_NG_,SH)
_S,A_O_
AUtO
P.ESEr

L

-

[ TV

]

PRESET

CHANNEL

CH
SET

UP

-

LANGUAGE

4 Begin auto preset

3 Enter the desired channel number
Press CH • or • button until the
desired channel number appears.
You can also use the number buttons to enter it.

- SETUPLANGUAGE

Press MENU button to move to
t_NGE,SN_
EsPA_OL
"AUTO PRESET" and press
..........
SELECT button.
The tuner scans and memorizes
all the active channels in your area.
NOTES:
• The TV/VCR distinguishes between standard TV
channels and CATV automatically.
• If you want to play or record a video tape BEFORE
presetting the tuner, you must press MENU button.
To preset the tuner again, see "AUTO PRESET
AGAIN".

J

4 Delete (or add) it from (into) memory
Press ADD/DELETE button. The channel number
changes to light red. The channel is deleted from
memory.
• To delete another channel, repeat steps [3] and [4].
• If you press the ADD/DELETE button again, the
channel is added to memory again.

l Deleted
dded channel
channel : :

5 After scanning

,SO_ET_C. "_
0_ c_ )

Light blue.
red.

L

The tuner stops at the lowest memorized channel.
(TV mode: from CH 02/CATV mode: from CH 01)
Should you want to recall the selected channels, you can
select the desired channel by using the remote control
number buttons or CH • or V.
TO RETURN
SCANNING

TO TV MODE

5 Exit the channel setup mode
Press MENU button to return to TV mode.
NOTE: If you wish to confirm that channel(s) has been
deleted or added, press CH • or • button.

WHEN

Press MENU button in scanning mode.

-12-

EN
6DI 1

1

Select

"CHANNEL

SET UP"

I
TIMER

"CHANNEL SET UP" and press
SELECT button,

PROGRAMMING

SE_,.GOL_K
osER
......

CHANNEL

SET UP

LANGUAGE
ENGLISH]
CAPTION
[C_PTION
1]
TIME SEARCH

2 Select "ENGLISH" or "ESPANOL"
Select "ENGLISH" or
"ESPAIqOL = Spanish" using
CH • or • button.

2 Select "TV" or "CATV"

AUTO

PRESET

ADO I DELETE

Begin auto preset

Press MENU button to move to
"AUTO PRESET" and press
SELECT button.

_MERPRO_
..... G
s_,,_P'C
.... CLO_KCO_T"O_
_ os_.,ss_,_
=/

[lj
CHANNEL

LANGUAG

SET

UP

[EP GLISH]

la

l

CAPTION
_11_1
_ME
SEA
_ 1_

Select [TV] or [CATV] by using
CH • or • button.

3

Select"LANGUAGE"

Press MENU button to move to "LANGUAGE".

-

c ......

,v,c,_
............
AUTO

dP"

|

_I

CH

ET

I

.J
UP -

3 Exit the Language mode
Press MENU button until the TV/VCR returns to the TV
mode.

__

PRESET

The tuner scans and memorizes
all the active channels in your area.

4 After scanning
The tuner stops at the lowest memorized channel.
(TV mode: from CH02 / CATV mode: from CH01)

- 13 -

EN
6D11

2 Set "AUTO CLOCK" to [ON]
Press
Settheclockaccurately
forproperautomatic
timer
[ON]
recording.
If thePublicBroadcasting
Station(PBS)is
available
in youarea,
follow"AUTOCLOCK
SETTING".
If it is not,follow"MANUALCLOCK
SETTING".

CH • or •
appears.

button until

,_TOCLC_
_._.
A_TOOLOC_°.
lanai
MANUAL

CLOCK

SET

3 Enter the channel number for the PBS station
A UTO

CLOCK

Press MENU button and use the CH • or • button until
the channel number for your local PBS station appears.

SL 171NG

You can have the TV/VCR set the clock automatically
by using the Public Broadcasting Station (PBS) channel
in your area. Once you have set the clock by using the
following procedure, the TV/VCR will automatically
monitor the correct time and date being broadcast by the
PBS station in your area, using a new service called
Extended Data Service (EDS).

If you do not know the PBS
channel number, leave it set to
[AUTO]. The TV/VCR will
search automatically all available channels for the local PBS
station, and will select that
channel.

Make

4 Exit the Auto Clock Setting
Press MENU button until the TV/VCR return to the TV
mode.

sure ...

• Turn on the TV/VCR.
• Confirm that the antenna connections are correct.
• The cable converter box must be turned on if your
TV/VCR is connected directly to it. (See NOTES)
• You must use the remote control for the following
steps.

MANUAL

CLOCK

SET

l

5 Turn off the TV/VCR
Press POWER button to turn offthe TV/VCR for searching the local PBS station. The power must remain off
during this search.
If you enter the channel number manually,

NOTES:
• Auto clock setting only needs to be set once, but can
be done again if the clock's time has become
incorrect for some reason.
• If the TV/VCR is connected directly to a cable
converter box, the local PBS station must be selected
on the cable box itself, and the TV/VCR must be set
to the output channel of the cable converter box
(usually channel 3 or 4), to be able to set up and
automatically correct the clock.
The TV/VCR cannot control the channels of the
cable converter box.

• it may take for about a few minutes for this search to
be completed.
If you choose [A UT01,
• the TV/VCR must search through all the available
channels. It must scan each channel for a couple of
minutes to determine if that channel is transmitting
the EDS signal, because the PB S station will send this
signal only once every minute. This search could take
up to 2 hours. You may want to start this channel
search at night when the unit is not in use.

• if the time that is automatically set by this selected
PBS station is incorrect, it may not be your local PBS
station, but one from a different time zone. Or there
is a case that no channel is broadcasting the EDS
1 Select "SETTING CLOCK"
signal in your area, as shown by no time being set
even after an overnight search. In these cases, you
"SETTING CLOCK" and press
..............._'C'_"E_"TROLmust manually enter the correct local PBS station, or
SELECT button.
CH".E_S_T_
set the clock manually, turning off the Auto Clock
Press MENU button to move to l"
.... u
Setting feature.
SETTING
USER'S

CLOCK

SET

UP

LANGUAGE
ENGLISH]
CAPTION
[C_PTI_N
1
TIME SEARCH

-14-

EN
61311

Make sure ...
lit/he

• The remote control needs to be used.

March 1st, 1996 at 5:40PM

• Power must be turned on.

1

Select

"SETTING

below, lhe clock will be sel Io."

eaample

Select the hour

CLOCK"

Press MENU button to move to
"SETTING CLOCK" and press
SELECT button.
Ill=*

Press CH • or • button until
your desired hour appears and
press SELECT button.

TLMER PROGRA_MLNG
PICTURE
CONTROL
SEI3"ING
CLOCK
CHANNEL
SET UP
USER'S
SET UP
LANGUAGE
ENGLISH]
CAPTION MENU
[C_PTION1
]
TIME SEARCH

EXAMPLE:

2 Select "MANUAL CLOCK SET"

03

II_

SETTING

CLOCK

SETTING

YEAR
FRI

1996

CLOCK

-

M'N
2
-'_1¢

t')l_"

_SETT,N_
C_O_,MONTH

Press CH • or • button until the
desired minute appears.
EXAMPLE: 40

8

3 Select the month

DAY
01

-

7 Select the minute

AUTOC_OC_
to,_
...... OC_oN
tAUTO_
_'

Press MENU button to move to
"MANUAL CLOCK SET" and
press SELECT button ............

5PM

MONTH

DAY

YEAR

o..........
,ous,,_gTE
o_ ._o_

Start the clock

Press MENU or SELECT button.

Press CH • or • button until
your desired month appears and
press SELECT button.
EXAMPLE: 03 = March

OUR

4 Select the day

-

Press CH • or • button until
your desired day appears and
press SELECT button.
EXAMPLE: 01 = 1st

Although seconds are not displayed, they begin counting from
00 when you press MENU or SELECT button. Use this feature to
synchronize the clock with the
correct time.

MINUTE

SETTING

CLOCK

MON_H,._,

• This unit has a built-in

-

calendar

5

40PM

1

up to the year 2010.

YEA.

o, ._oI¢ ......
HOUR

MINUTE

TO CHANGE

CLOCK

SETI7NG

1) Follow steps [1] and [3].
ii

i

ii

iii

i

i

ii

i i i

5 Select the year
Press CH • or • button until
your desired year appears and
press SELECT button.
EXAMPLE: 1996

-

MONTH

8ETTtNG

DAY

.......
HOUR

MINUTE

CLOCK

-

_E_R•

/

-:,%.]
/

J

2) Select where you want to change using SELECT button or ADD/DELETE button.
3) Enter correct numbers using CH • or • button.
4) Press MENU or SELECT button to start the clock.

HINT!
If there is no local PBS station in your area or on your cable system, in step2
press CH • or • button to show [OFF], then manually adjust clock.
- 15 -

above, select "AUTO CLOCK

" and

EN
6DI 1

rio check the CiouJltcr, Clock a_d Channel number on the TV scrcen, press SELECT button t)_ the remote control.
Each time you press SELECT button on the remote control, the TV screen will change as follows:

When

the Closed

Caption

mode

is OFF:
OFF mode

Counter mode

Clock mode

• Counter mode: After 5 seconds, only
the counter remains. To clear it, press

CH2

• Clock mode: After 5 seconds, only the
SELECT
clock
and button.
the channel number remain.
To clear them, press SELECT button.

STOP

[
$P

COUNT

5:40PM

SP

0:12:34

_ After 5 seconds
5:40PM

OH2

COUNT

0:12:34

Counter
remains

Clock & Channel
remains
.........................

When

the Closed

• The On-Screen

Caption

mode

Display disappears

is ON:

OFF mode

..................

Clock/Counter

•

mode

after 5 seconds.

• This is true even if MUTE button is pressed,
PAUSE/STILL button is pressed while recording.

or

SP

COUNT

0:12:34

SPECIAL FEAT URES

Magnetism
from nearby
color of the TV picture.

appliances

might

affect the

If this happens, move this unit away from the appliance.
If the color is still not correct, disconnect power cord
from AC outlet and reconnect it after 30 minutes.

• When the end of a tape is reached during recording,
playback, or fast-forward, the tape will automatically
rewind to the beginning, eject tape, and turn off.
• This function is operative
the [OFF] position.

when Auto Repeat is set to

• The tape will not auto-rewind
or One Touch Recording.

during

timer recording

• When the tape is rewound to the preset memory position of the Counter Memory during Auto Rewind,
the tape will not eject and TV/VCR will not turn off.

-16-

EN
6DI1

1

Turn

2

Select

The TV/VCR's picture controls - BRIGHT,
CONTRAST, COLOR, TINT and SHARPNESS are preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for a natural looking image.
NOTES:

on the TVNCR

the channel

number
CH 06

Press CH • or • button to select
your desired channel number.

• Procedures must be followed within 5 seconds or the
Picture Control mode will be cancelled.
• When setting the Picture Control, the Game mode
will automatically set to [OFF].

3 Adjust sound

Make

Press VOLUME • or • button
to adjust the volume.

sure ...

• Use the remote control unit for the following steps:

1

Select

"PICTURE

CONTROL"
J

VOLUME 20
lllililiilnl

Press MENU button to move to _"

- M_NoSETTING

press SELECT button.
"PICTURE CONTROL"
This function enables you to adjust the TV screen
making it suitable to use for a TV GAME.

and

CLOCK

C""NE_osE,
SS_S_
UPOP
/" _._"Oa'_',.Gp,0_0RE_T.OL
LANGUAGE
[ENGLISH
CAP'FION
_AP'IION
1
T ME SEARCH

2 Select the item you want to adjust

Make sure ...
You must use the remote control unit for the following
steps:

Press SELECT button until the desired control is
displayed. Each will appear in sequence on the TV
screen.
CONTRAST

TIMER

PROGRAMMING

COLOR
TINT
SHARPNESS

PLGTURECONTROL

Press MENU button to move to
SE'_,N_0_0CN
"USER'S
SET
UP"
and
press
.....
'SSE,_
1 Select "USER'S SET UP" I
-"_N_SELECT button.
' .........
CHANNEL

SETUP

LANGUAGE
ENGLISH l
CAPTION
[C_PTION
1]

REPEAT

_.1_

PLAY

l" _AM.ENT,_O0_
._o_k-to%
AUTO

RETURN

[OFF]

Press MENU button until the TV/VCR returns to the TV
mode.
TIlE

GAME

_J

CH •

CH •

BRIGHT

to decrease
brightness

to increase
brightness

CONTRAST

to decrease
contrast

to increase
contrast

to pale

to brilliant

to purple

to green

to soft

to clear

[OFF]

3 Exit the Game mode

TO CANCEL

BRIGHT
_JI

Press CH • or • button to adjust to 'our desired level.

..... .......
EM

[ON] appears,

,,J

3 Adjust the picture control

2 Set "GAME MODE"to [ON]
Press CH • or • button until f

-:l

COLOR
TINT
SHARPNESS

MODE

Repeat step [1] and [2], selecting [OFF]. Press MENU
button to return to TV mode.

-17-

EN
6Dll

Make

CAPTION mode: By choosing the caption mode, you
can watch dramas, movies and news, while captionand the contents

1

of news.

2
Press

NOTE:
Not all programs are broadcast with closed captions.
Your television is designed to provide error free closed
captions from high quality antenna, cable and VCR
signals. Conversely,
poor quality signals are likely to
result in caption errors or no captions at all. Common
signal conditions which may cause captions errors are
listed below:
ignition

"CAPTION"
button

to move to

TIMER
PROGRAMMING
PICTURE
CONTROL
SETTING
CLOCK
CHANNEL
SET UP
USER'S
S
P
L AN G U A_li_:i'_ L IS H]
CAPTI_-MENUOFF

1

Select your desired caption menu
CH •

or •

button

until

your desired caption menu
appears.
([CAPTIONI],
[CAPTION2],
[TEXT1] or [TEXT2])

-MENU-

..............
c
_E_,N_
°LOON
USER'
......
....... _' •
PICTURE

CHANNEL

CONTROL
SET

LANGU AG _E
CAP TIOIW*I(

UP

JJG L_H]
PTIONI]
_

3 Exit the caption setting mode
Press MENU button until the TV/VCR returns to the TV
mode.

noise.

motor brush noise.

• Weak snowy reception

on TV Screen.

• Multiplex signal reception
or airplane flutter.
• Playback

steps.

T,ME
sere q

1/2: You may get these captions or text information
by
selecting either "1" or "2". "2" is used usually for a
second language if available.

• Electric

Select

Press MENU
"CAPTION".

TEXT mode: By choosing the text mode, you can watch
full screen text information.

• Automobile

...

• Use the remote control unit for the following
• Power must be turned on.

You can view specially labeled (cc) TV programs,
movies, news and pre-recorded
tapes with either a
dialogue caption or text display.

ing the dialogues

sure

of poorly recorded

displaying

picture ghosts

or worn VCR tapes.

If the TV/VCR displays a black box
on the TV screen, this means that
the TV/VCR is set to the TEXT
mode.
To clear screen,
select
[CAPTION1],
[CAPTION2]
or

TO CANCEL
SYSTEM

7'HE CLOSED

CAPITON

Repeat steps [1] and [2], selecting [OFF] using CH •
or • button.

(

[
,---

WHEN
IS ON

THE

CLOSED

The On Screen Display

[OFF].

CAPTION

will disappear

MODE

after 5 seconds.

• This is true when the MUTE button is pressed and
when PAUSE/STILL
button is pressed while recording.

- 18-

EN
6DII

_UI_NiAL
Make

i_LAil

sure ...

[ PIcTuREsEARCH

• Power is turned on.

This feature is useful in finding or skipping over a
particular scene on a tape. In this mode, the sound is
muted.

1 Insert a pre-recorded tape
if the erase-protection tab has been removed,
TV/VCR will start playback automatically.

the

Press PLAY button.
2

itALtk

1) While in the PLAY mode, you can view a video tape
at a high speed in either a forward or reverse direction
by pressing F.FWD or REW button.
(available in SP / LP / SLP modes)
2) Depress it again, the TV/VCR will now search in
super high speed.
(available in LP / SLP modes)

IP_"

NOTE: Tapes recorded in the SP or LP mode will
display a noise bar on the TV screen and the
picture may revert to Black and White.
This is normal.
Press STOP button when playback is completed.
3

3) For normal

speed, simply press PLAY button.

I _
STILL

PICTURE

You can view a still picture on the screen during playback (the STILL mode). Press PAUSE/STILL
button
during playback. Only tapes recorded in the SLP mode
will show the least amount of lines.

TRACKING ADJUSTMENT
• Tracking adjustment will be set automatically
(Digital Auto Tracking function) (ATR) when you start
playback.
• When playing pre-recorded
tapes or tapes recorded
on units other than your own, noise lines (black and
white streaks) may appear on the screen. If this
occurs, adjust the tracking control by pressing CH •
or • button until the streaks disappear. To return to
the ATR function, stop the tape once and start playback again.

Press PLAY button to return to playback.
NOTES:
• Usually there will be video "noise" lines (black and
white streaks or dots) on the screen. This is normal.
If the tape was originally recorded in SP or LP mode,
the still picture will be black and white in addition to
the "noise" lines.
This is not a fault of the machine,
but merely a
by-product of the technology involved in producing a TV/VCR with LP mode.
• If it is left in the PAUSE mode for more than five
minutes, the TV/VCR will automatically switch to
the STOP mode.

I NOISE CANCEL (in the STILL mode)
This feature allows you to reposition or reduce the noise
lines of a still picture.
Press PAUSE/STILL button so that the noise lines
change position on the screen and you can see the picture
in its entirety without distracting noise lines.
NOTE: This feature can be activated ONLY when
viewing a tape recorded in the SLP mode.

- 19-

EN
6DI1

Make

sure

...

• Use the remote control

lot the following

steps.

The TV/VCR has an auto repeat function that allows you
to repeat a tape indefinitely without using the PLAY
button. There are two selections for Auto Repeat Playback.

• Power is turned on.
• Insert a pre-rccorded

tape.

ALL REPEAT: Repeats playback from the beginning to
the end of the tape.
This function cuables you to improve the picture quality
when playing back worn cassettes such as rental tapes.

BLANK REPEAT:Repeats playback from the beginning to a blank part, which is blank for more than 10
seconds.

NOTE:
P,CTU,ECONTROL
,. _R'_N_S_+UP_R._,Up
_ME
SE,,C.
TIMER

Press MENU button to move to
"USER'S SET UP" and press
SELECT button.

PROGRAMMING

SETI"IHG

CLOCK

LANGUAGE
ENGLISH
CAPTION
[C_PTION1]

I

All buttons except POWER and STOP buttons
do not work during Repeat Playback. Always
set the Repeat Playback to [OFF] when not
using this function.

1 Select "USER'S SET UP"
Press MENU button to move to [
.... o"USER'S SET UP" and press
S_,.G_OC_
SELECT button.
°OSE.'S
..........
SETUP
r

2 Set "RENTAL" to [ON]

TIMER

Press MENU button to move to
"RENTAL PLAY". Press CH •
or • button until [ON] appears.

GAME

MODE

RENTAL

II_

.....

Im

REPEAT
PLAY
- USER'S
SET
AUTO RETURN

--

_1. [OIFF]

[ON]

1

•

10_: F]%
UP [OF_

LANGUAGE
ENGLISH]
CAPTION
[C_PTtON
1]

I
II_

TIME

2 Select "ALL" or "BLANK"

_,¢--.-o_

Press MENU button until the TV/VCR returns to the TV
mode.

4 Start playback
Press PLAY button to start playback. "RENTAL
PLAYI_" appears.
• The Rental mode stays in effect until it is cancelled.

THE RENTAL

SEARCH

J

3 Exit the Rental setting

TO CANCEL

PROGRAMMING

Press MENU button to move to
"REPEAT PLAY".
Press CH • or • button until
your desired selection [ALL] or
[BLANK] appears.

RENTAL

_

[O_F]

/

I o:,::::°°2:1

3 Exit the Repeat Play setting
Press MENU button until the TV/VCR returns to the TV
mode.

MODE

4 Start playback

Repeat steps [1] and [2], selecting [OFF]. Press MENU
button to return to TV mode.

Press PLAY button to start the Repeat Play. "REPEAT
PLAY I_" appears.
• The Repeat Play mode stays in effect until it is
cancelled.
• If the Rental mode is set [ON], the "RENTAL
PLAYI_" display has priority.

TO CANCEL

THE

REi'EA

T PIA

Y MODE

Press STOP button to stop playback. And repeat steps
[1] and [2], selecting [OFF]. Press MENU button until
the TV/VCR returns to the TV mode.

- 20 -

EN
6D11

Make _ure ...
• Use the remt)tc ct).t_t)l

lt)_ the lolk)_xiJ_g _tcps.

• Power is turned on.
• Insert a tape.

This feature can be used to memorize the beginning
point that you want to review. You can search for it easily
by rewinding or fast forwarding.
NOTES:
• If the All Repeat or Blank Repeat is set to [ON], the
Counter Memory function does not work.
• If the counter is not displayed, the Counter
Memory will not be activated. Press C.MEMORY
button so that the counter appears on the display.

1

Stop tape at desired point

Rewind or fast forward the tape to the beginning point
where you want to review. Press C.RESET button to
reset the counter to 0:00:00

The Time Search function makes it possible to quickly
advance the tape to your desired position from any
position by entering the exact amount of playback time
of the part that you want to skip.
NOTES:
• Time Search can be set up to 9 hours
(9:50) in 10 minutes increments.
• This function
• Counter
mode.

C.MEMORY

that "MEMORY"
display.

button
appears

Begin recording

Press RECORD

4

cannot

be used

in this

tape is

1 Select"TIME SEARCH"

so

TIMER
PROGRAMMING
PICTURE
CONTROL
SEI_ING
CLOCK
CHANNEL
SET UP
USER'S
SET UP
LANGUAGE
[E NGLISHI
-MENU- CAPTIONI]
CAPTION
TIME SEAI_CH

Press MENU button to move to
"TIME SEARCH" and then
press SELECT button.

on the

or playback

Enter your desired time

Press CH •

or PLAY button.

Press STOP button to end recording

function

mode.

In the example below: A program is viewed 2 hour 50
minutes from the present position of the tape.

2
3

Memory

in recording

• This function only works when a cassette
inserted in the TV/VCR.

2 Select Counter Memory mode
Press

is not operative

50 minutes

or playback.

or •

I mTikql_ S_A P_H

button until

your desired time appears.
EXAMPLE:
2:50 = 2 hrs 50 rain

j2 :_ 0%.

To activate the Counter Memory

Press REWIND (or F.FWD) button. The tape will
automatically
stop when the counter returns to 0:00:00
(approx.).

3

Begin Time Search

Press REWIND
to the specified

or EFWD button.
point in time.

The tape will move

The time counts down as the search progresses. When
0:00 is reached, the tape automatically
starts playback.

7D CANCEL

17tE COUNTER

First press C.MEMORY to
display the counter on the
TV/VCR screen. Then, press
C.MEMORY continuously until
"COUNT" appears.

MEMORY
1"0 CA NCEL

THE

TIME

SEARCH

Press STOP/EJECT button on the TV/VCR or the
remote control. This will delete the selected time.

- 21 -

EN
6DI1

Make sure ...
• Power is turned on.
• The erase-prevention

tab is still intact on tile cassette tape.

• Rewind or fast forward the tape to the point where you want to begin recording.

You can only watch the same TV program
recorded.

that is being

Press PAUSE/STILL

button to (PAos_

REC indicator blinks.
Press the number buttons on the
remote control or CH • or •
button to select the channel to be
recorded.

CH 10 ]

Press
PAUSE/STILL
or
temporarily
stop recording.
The
RECORD button to resume
recording.
NOTES:

• To prevent tape damage, after five minutes, the
TV/VCR will automatically return to the Recording
mode.

2
Press SPEED button to select the
desired tape speed (SP/LP/SLP).

• When in the PauselStill mode, a display showing 5
"I" marks will appear on the screen. Each "I" mark
represents one minute of Pause time. You may refer
to this display for remaining pause time available.
• If "CLOSED CAPTION [ON]" is selected from the
"CLOSED CAPTION SET UP" menu, the
On-Screen Display will appear for 5 seconds, then
disappear.

3

|_EC
Press RECORD button to begin /
recording.

l's.....

The REC indicator

flashes while recording,

• If you want to check the remaining pause time
available using the On-Screen Display, press the
SELECT button. The On-Screen Display again will
disappear after 5 seconds.

p

4
Press STOP button when recording is completed.

- 22-

EN
61) 11

This function enables you to set a recording length
simply by pressing RECORD/OTR
button on the
TV/VCR.

Connect your TV/VCR and a Source (Playing) VCR
using the following diagram.

Make sure...
Your TV/VCR

• Power is turned on.
• The erase-prevention tab has not been removed.
NOTE: This function CANNOT be done from the
remote control.

AUDIO

VIDEO

o
RECORD

1 Select the channel to be recorded
Press number buttons on the remote control or the
CHANNEL • or • button.
2 Begin OTR
Press RECORD/OTR button on (,T,_....
the TV/VCR as many times as
needed. The recording length
will be determined by the
number of times you press
p
RECORD/OTR button.

VIDEO

Audio/Video
adapter cords
(not supplied)

Each additional push will increase the recording time by
30 minutes up to 8 hours.
Push(es)

Display

1 push

@ @
OUT ,N

@

J

Recording length

Source (Playing) VCR

(normal recording)

2 pushes

0:30

30 minutes

3 pushes

1:00

60 minutes

1) Insert a pre-recorded
(Playing) VCR.

video cassette into the Source

2) Insert a blank video cassette, or one you want to record
over, into the TV/VCR.
17 pushes
18 pushes

8:00

480 minutes
(normal recording)

HINTS:
• Recording starts immediately when the REC/OTR
button is pressed.
• When REC/OTR button is pressed 18 times, the
TV/VCR switches back to the Normal Recording
mode.
• To stop the OTR operation, press STOP button on the
TV/VCR or on the remote control.
• To show the remaining time, press SELECT button
until "OTR" appears on the TV screen.

3) Press SPEED button to select the desired recording
speed (SP, LP or SLP).
4) Press CHANNEL • or • button until "AUX"
appears on the screen.
5) Begin playback of the tape in the Source (Playing)
VCR.
6) Press RECORD button on the TV/VCR.
NOTE: For best results during dubbing, use the
TV/VCR's front panel controls whenever
possible. The remote control might also affect
the Source (Playing) VCR's playback
operation.

• Recording stops when 0:00 is reached.
• Please note that in the SLP mode maximum recording time, assuming the tape is started at the beginning, is 8 hours using T- 160 (or 6 hours using T- 120).
• If the tape runs out before the end time, the TV/VCR
will switch to the Stop mode immediately, eject the
tape and the TV/VCR power will turn off.

- 23 -

EN
6Dll

TIMER
i

1 Select "TIMER PROGRAMMING"
Press MENU button to move to "TIMER
MING" and press SELECT button.

You may set the TV/VCR to record while you are away.
You can set 8 programs to record on a specific day, daily
or weekly within a 1 year period.
In the example

• If"SETTING
CLOCK"
appears, follow page 15 to set
clock and repeat from step
[31.

below, the timer is set to record at:

DATE:
SETTING TIME:
CHANNEL:
TAPE SPEED:
PROGRAM
# :

MAY 6th, 1996
7:30PM to 8:50PM
CH61
LP
4

2

PROGRAM-

_..... o_......
s_........
PICTURE

CONTROL

CHANNEL
SET UP
USER'S
SET UP

CAPTIoNLANGUAGE[c_PTICHljENGLISH]
-MENU-

I_.

,....... CH

Select the program number (1~8)
/

The remaining program numbers
do not flash.
PressCH • or • button until the
desired
number
appears
and
press SELECT button.

NOTE: Use the remote control for this procedure.
Make sure ...

[P.O_NA_

L

EXAMPLE: 4

J

ATE --_-- _S_!%

• Be sure the clock is set to the correct time and date
before setting the timer.

END

TIME

CHANNEL

--

-

TARTTIME

- - : ....

APE SPEED

-

-

Avoid over lap of programs...
There is a case that a program will not be performed.
when programs overlap;

3

• The program with an earlier start time has priority.

For once recording :

• Once the earlier program finishes, the overlapping
programs will begin recording in sequence.

Press CH • button

• The illustration below demonstrates the sequence of
recordings.
Program 1
10:00AM- 11:00AM
Program 2
9:00AM - 10:00AM
Program 3
9:30AM - 12:00PM

I

',1

'

I

=
=

_m

TIME

--

: ....

_'N_EE
l!,E
........ ° --

_P,O_RA_,,W,
M_.t _
IC`'E --_E]Y]A_¢

press SELECT

:_,_E

_:_-__

PE SPEED
IT ACHANNEL

---

button.

i
!

SIS

Press
CH • button
until
"EVERY DAY" appears and

I

9:00AM - 11:00AM

|°ATE_,_o_o_-

For every day recording: To record a TV program
same time on the same channel every day.
(Example: Monday through Sunday)

Program 1
'
IO:00AM
- 11:00AM
_=

Program
3
9:30AM
- 12:00PM

_..O_RA%N_"=
until your

SELECT
button.
desired date
appears and press
EXAMPLE:
05106 = May 6

Recording Sequence

Program 2

Select once, every day, or weekly recording

at the

"]

I

i

9:00AM
10:00AM
11:00AM
*Recording period is SHADED

12:00PM

For weekly recording : To record a TV program at the
same time on the same channel every week.
(Example:
Every Monday on channel 7 at 5:00PM
Press

- 24 -

CH

•

button

until

(P,O_RAMN_ ,

"EVERY" with your desired

€111%
/°"E ._E,_S,T.

day of the week appear

I S'A"_T'_ .......

button.
together

,PESPEED
-L:
T_:_'N_
_-

and press

SELECT

EN
6Dll

4 Set start hour

70 Exit the program mo0e
DATE

Press CH • or • button until
your desired hour appears and
press SELECT button.
EXAMPLE: "7,PM" = 7:30PM

05106

MON

......ME
."
ROGBAM

NUMBER

IE......

Press SELECT button. Program 4 is now completed.

4

To set another

/X__s_!'_

SPEED
C[:2 PE
ANNEL

--

--

05/06
NUMBER

START _ME

_

CHANNEL

- -

END TIME
TAPE SPEED

-- -

timer

Press POWER button to set automatic timer recording.
The TIMER REC indicator lights up.
• You must turn off the TV/VCR to activate automatic
timer recording.

5 Set start minute
DATE
PROGRAM

repeat steps [1] to [10].

)

11 Set the

Press CH • or • button until
your desired minute appears and
press SELECT button.
EXAMPLE: "30" for 7:30PM

program,

MON
4

30

If power is not turned off and you continue watching
TV, "TIMER REC STANDBY" will start flashing on
the TV screen 2 minutes before the programmed start
time.

:

6 Set end hour
Press CH • or • button until
your desired hour appears and
press SELECT button.
EXAMPLE: "8,PM" = 8:50PM

7

DATE
IIS

05/06

ROGRAM

MON

NUMBER

4

..... E ..tV_,Y,
CHANNEL

_l_

TAPE SPEED

- -

TO CORRECT
•

While setting a program; press ADD/DELETE
button to go back one step, and enter correct numbers
using CH • or • button.

Set end minute

Press CH • or • button until
your desired minute appears and
press SELECT button.

DATE
I

"50" = 8:50PM

Press CH •

or • button until

After setting a program;
1) Press POWER button.
2) Repeat steps [1] - [2].
3) Press SELECT button (or press ADD/DELETE
button to go back one step) until the part you want
to correct begins flashing,then
make the change.
4) Repeat steps [10] and [11].

MON

NUMBER

4

IEND"MEO*_O_
I

EXAMPLE:

05106

'ROQRAM

CHANNEL

--

TAPE

SPEED

- -

B.......

E

|

.....

END TIME

PM
:50

PM

...... 2_
_.T,
....... s___%

your desired channel number
appears
button. and press SELECT

TO CANCEL
RECORDING

Set the tape speed

Press CH •

or •

button

DATE

until

START

your desired
EXAMPLE:

tape speed appears.
LP

f

05106

TIME

END
TIME
=ROGRAM

NUMBER08:50

CHANNEL

_TAPESPEED

MON

O7:30

PM
4

TIC TIMER

PM

While recording is in progress;
1) Press POWER button.
2) Press STOP/EJECT
button on the TV/VCR.

1

i

AN A UIDMA

While setting or after setting a program;
1) press POWER button.
2) Repeat steps [ 1] ~ [2] and select a program number
you want to cancel.
3) Press ADD/DELETE
button.
4) Press MENU button to return to the TV mode.

EXAMPLE: CH61

9

A PROGRAM

i

LP ul
SB%

If you press POWER button to turn off before the end
time, timer recording will continue to function.
Repeat steps [ 1] ~ [2], select the program number you
want to cancel and press ADD/DELETE
button.
Press MENU button to return to the TV mode.

- 25 -

EN
6DII

1) Press POWER button so that the REC indicator goes
off.

2) Press MENU button on the remote control.

With this feature, after timer recording is finished, the
beginning of the recorded program(s) can be searched
for automatically.

3) Press MENU button to point to "TIMER
PROGRAMMING".

1 Select "USER'S SET UP"

4) Select a program number you want to check. The
details of selected program will appear on the TV
screen.

Press MENU button to move to
"USER'S SET UP".
I_

TIMER
PROGRAMMING
PICTURE
CONTROL
SETTING
CLOCK
CHANNEL
SET UP
USER'S
SET UP
LANGUAGE
ENGLISH]
CAPTION
[C_,_TION 1 ]
TIME SEARCH
-MENU-

5) Press MENU button. The TV screen returns to the
TV mode.
2 Set "AUTO RETURN" to [ON]

HINTS:

/

• Make sure the channel you want to record is properly
set in advance.

Press MENU button to point to [

• If you are recording using a Timer mode, you may
not operate the unit manually.

Press CH • or • button until
"AUTO
RETURN".
[ON] appears.

-usE,.sSET
uPRENTAL

[OFF]

REP_
.....
_qr_
[,, _.......
to_F]
A_OR_OR.
"d,'_,"

• Recording begins automatically at the Start time.
• It is not necessary to press RECORD button for timer
recording.
• The erase-prevention tab on the cassette must be in
place (or you must put tape over the hole).
• If the erasure protection tab is removed, the cassette
will be ejected when the POWER button is pressed
to off.
• If the tape runs out before the end time, the TV/VCR
will switch to the STOP mode immediately, and the
tape will be ejected.

3 Auto Return will begin
When all the timer recordings are completed, the
TV/VCR will rewind to the beginning of the recorded
program(s).
NOTES:
• If you press POWER button while tape is rewinding,
the Auto Return will stop.
• The Counter Memory function cannot be used in this
mode.

- 26 -

EN
6DI 1

The Sleep Timer function turns off the TV/VCR without
using the POWER button after a desired time period of
time.
Press SLEEP button on the
remote control until your desired
sleep time appears.
Each additional push will
increase the recording time by 30
minutes up to 120 minutes.

The alarm function enables you to turn on the TV/VCR
without using the POWER button after a desired time
period.
1 Select ALARM mode

SLEEP

120 MINUTE

Press ALARM button on the
remote control.

I

_1
ALARiI_I

DISPLAY

SLEEP TIME

1 push

0 MINUTE

0 minute

2 pushes

30 MINUTE

30 minutes

3 pushes

60 MINUTE

60 minutes

4 pushes

90 MINUTE

90 minutes

5 pushes

120 MINUTE

120 minutes

6 pushes

0 MINUTE

0 minute

2

IIII

1 2:0

Ji

0 AM

,ll'l

I

I

_

_1

II

I1

_1

II

1

Select the alarm time

Press CH • or V button until
your desired time is appeared
and press SELECT button.
EXAMPLE: 7:30AM
w

TO CANCEL

TIlE

SLEEP

3 Confirm the alarm time is correct.
To check alarm time,
press ALARM button. When
"ALARM OFF" appears on the
screen, repeat steps [1] and [2].

TIMER

ALARM=.0 7 : 3OAM 11_
4" I
II
_J

Press SLEEP button until "SLEEP 0 MINUTE" appears.

4 Activating the alarm timer
Press ALARM button again.
"ON" appears next to the alarm
time on the screen.
The TV/VCR will turn on
automatically at the set time.

TO (/ANCEL

THE ALARM

ALARM

0

7:30AM

I

TIMER

Press ALARM
button so that
"ALARM OFF"
appears on the screen.

- 27-

EN
6D11

i KO

_ bLi_iiOO

1 1_

tJ

is Is iiib

If you have thoroughly read this instructions manual and are still having some difficulties operating your TV/VCR,
the chart below will help you to locate the problem and give you corrective measures to fix it. Find which symptom
best matches the difficulty you are experiencing and use the information in the columns on the right to remedy the
problem.
POSSIBLE CAUSE

SYMPTOM
No power.

No picture and sound.

• AC Power cord is not connected.

• Connect AC power cord to AC outlet.

• POWER button is set to OFF.

• Set the POWER button to ON.

• No channel in memory.

• Program tuner's memory.

• Antenna is not connected.

• Check antenna connection.

• TV/VCR is not plugged
active AC outlet.
No picture or poor
picture on TV/VCR.

No sound or poor sound.

Timer recording
possible.

CORRECTIVE ACTION

into an • Plug power cord into an active AC outlet.

• Direction or condition of antenna is
not adequate.

Adjust direction or replace antenna.

• Picture control is not adequate.

• Adjust picture controls.

• Volume control on remote control
unit or main unit is in minimum
position.

• Adjust volume control on remote control
unit or set.

• MUTE button on the remote control
unit is in the ON position.

• Press MUTE button.

is not • The timer recording is set incorrectly.

• Set the timer recording correctly.

• The timer recording is not set to ON. • Set the timer recording to ON.
Cannot go into Record
mode.

• The erase-prevention
is missing.

Playback picture is
partially noisy.

• The TRACKING
correctly.

Noise in picture on
playback.

• Video heads are dirty.

• Head cleaning is necessary, consult the
nearest Sears Service Center.

No operation by infrared
Remote Control.

• No power to TV/VCR.

• Make sure the AC cord is connected to
an AC outlet.

• Weak batteries.

• Check the batteries in infrared Remote
Control.

tab on cassette

• Place plastic tape over missing
erase-prevention tab.

control is not set • Adjust TRACKING
picture.

- 28 -

control for better

EN
6Dll

CLOSED CAPTION
PROBLEM

POSSIBLE REMEDY

My TV/VCR is showing captions
that are misspelled.

You are watching a live broadcast and spelling errors made by the closed
captioning production company may pass through uncorrected. A
pre-recorded program will not show any misspelled words because of the
normal time available for editing the captions.

My TV/VCR will not show the
text in its entirety or there is a
delay of what is being said.

Captions that are delayed a few seconds behind the actual dialogue are
common for live broadcasts. Most captioning production companies can
display a dialogue to a maximum of 220 words per minute. If a dialogue
exceeds that rate, selective editing is used to insure that the captions remain
up-to-date with the current TV screen dialogue.

My captions are scrambled with
white boxes on the TV screen.

Interference caused by building, power lines, thunderstorms,
cause scrambled or incomplete captions to appear.

My program guide listed a TV
show as being closed captioned
but none of the captions were
displayed.

Broadcasters may at times use a time compression process to speed up the
actual program so that additional advertising time can be given. Since the
decoder cannot read the compressed information, captions will be lost.

Although the tape box says it has
closed captions, my pre-recorded
video tape does not show any
captions.

The video tape was either an illegal copy or the tape duplicating company
accidentally left out the captioning signals during the copying process.

My TV screen shows a black box
on certain channels.

You are in the TEXT mode. Select CAPTION mode or CAPTION [OFF].

etc. may

MAINTENANCE
CABINE

T CLEANING

SER VICING

• Wipe the front panel and other exterior surfaces of
the TV/VCR with a soft cloth immersed in lukewarm
water and wrung dry.
• Never use a solvent or alcohol. Do not spray
insecticide liquid near the TV/VCR. Such chemicals
may cause damage and discoloration to the exposed
surfaces.
HEAD

• Should your TV/VCR become inoperative, do not try
to correct the problem by yourself. There are no userserviceable parts inside. Turn off, unplug the power
cord, and take the unit to the nearest Sears Authorized
Service Center for servicing.

CLEANING

• Picture playback may become blurred or interrupted
while the TV program reception is clear. This does
not mean that the recorded program has been erased.
Dirt accumulated on the video heads after long
periods of tape playback, or the usage of rental or
worn tapes can cause this problem. In this case, video
head cleaning requires highly technical attention,
therefore consult the nearest Sears Authorized
Service Center. Clean heads only when problems
occur.

- 29 -

EN
6DII

51q_.,Lli_
(iI_AI:t(A

L ,51)i:(.It'

CRT :

Television system :
Closed caption system :
Video Heads :
Tape width :
Tape speed
SP :
LP :
SLP :
Tuner channel
TV VHF Low :
TV VHF High :
TV UHF :
CATV
VHF :
MID band :
SUPER band :
HYPER band :
Terminals
Antenna input :
Video input :
Audio input :
Earphone :

I(.A

1 IONS

13 inch in-line gun,
90 ° deflection tube
NTSC-M
§15.119/FCC
Rotary two-head
1/2 inch

iLA

i iON

ELECTRICAL

#2-#6
#7-#13
#14~#69
5A
A5~A1, A~I
J~W
W+l ~W+84

5t'15C1i,1CA

Video input level :
Audio input level :
Video S/N ratio :
Audio S/N ratio :

OTHER
33.40mndsec.
16.67mm/sec.
11.12mm/sec.

5

0.5-2.0Vp_p
-15dBs
More than 46dB
More than 43dB

SPECIFICATIONS

Power requirement :
Power consumption :
Dimensions :

Weight :

t 107€5

AC 120V/60Hz
75W
H : 15-13/16" (402mm)
W : 15-3/16" (386mm)
D : 14-3/4" (375mm)
27.56 lbs (12.5 kg)

• Designs and specifications are subject to change
without notice and without our legal obligation.

VHF/UHF 75 ohms
unbalanced
RCA connector x 1
RCA connector x 1
1/8" monaural (3.5 mm)

- 30 -

EN
6DI1

tWARRANTY

I

TV/VCR COMBINATION
LIMITED WARRANTY
This product is exclusive to and is warranted solely by
Sears. For 90 days from the date of purchase, Sears will repair any defect in material or workmanship in this TV/VCR
combination, free of charge. For one year from the date of
purchase, Sears will supply, at no charge, replacement for
defective parts.

OWNER'S
MANUAL

This above warranty coverage applies only to TV/VCR combinations which are used for private household purposes.

LIMITED WARRANTY ON PICTURE TUBE
After one year from the date of purchase and up to two
years, Sears will furnish, free of charge, a replacement for
the picture tube, if defective. You pay for labor.

MODEL NO.
SRV1320S

Warranty service is available by returning the TVNCR combination to the nearest Sears Service Center/Department in
the United States. This warranty applies only while this product is in use in the United States. For service after the warranty expires, it is recommended that this product be
returned to the nearest Sears Service Center.

This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.

Sold by Sears, Roebuck and Company, Dept.817WA
Hoffman Estates, IL 60179

0EMN01136
B5705UF *#r***

Printed in Malaysia



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 31
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Mon Apr 02 02:39:40 2007
Author                          : 
Title                           : 
Subject                         : 
EXIF Metadata provided by EXIF.tools

Navigation menu