ZHUHAI WINGPOW EROTIC and NOVELTY OMBES01 ESCA User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3581684
Application ID	CS7qWBY8NtV1TW/dnfahMA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	65.68kB (821038 bits)
Date Submitted	2017-09-27 00:00:00
Date Available	2017-09-27 00:00:00
Creation Date	2017-08-18 12:09:00
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2017-09-25 12:22:08
Document Title	User Manual
Document Creator	Adobe InDesign CC 2017 (Macintosh)

English
OhMiBod is committed to bringing you high quality technology enabled
pleasure products and accessories. Before you begin enjoying esca, please
take a moment to review this manual.
esca - What’s in the box
Bluetooth®-enabled wearable vibrator
Power button
USB
charging socket
• USB charging cable
• Privacy pouch
How it Works
DOWNLOAD
OhMiBod® Remote App
TURN ON esca
PAIR devices
Using esca - 3 Modes of Operation
Bluetooth® Mode:
1. Press
3-4 seconds to turn on.
NOTE: Blinking white LED power button
indicates vibe is ready to connect via Bluetooth ®.
Blinking
2. Pair to phone/tablet. Bluetooth ® range up to 26ft (8m). See section “Pairing Your Phone/Tablet.”
3. Launch OhMiBod ® Remote App.
4. Press and hold
NOTE: After 30 minutes of non-use, the massager with automatically shut off to
conserve battery life.
BLUETOOTH MODE® HAS 3 SETTINGS:
1. 0 clicks = 100% power & 100% light
2. 1 click = 50% power & 100% light
3.
Manual Mode:
1. Press
3-4 seconds to turn on.
3 times to switch to manual mode. First pulsation is a continuous vibration.
2. Press
This confirms manual mode is active.
to move to next pulsation pattern. There are a total of 4 pulsations. Pressing the
Press
button again will cycle back to Bluetooth® mode.
3. Press
for 3-4 seconds to turn off.
Pairing Your Phone/Tablet
1. Turn on esca massager.
NOTE: Blinking white LED on power button
indicates massager is ready to pair.
2. Open the Bluetooth® settings on your
phone/tablet.
3. Select “OhMiBod esca”. This is the
esca massager.
4. Select “Pair”, if prompted, enter the PIN 0000.
0000
5. LED on power button glows steady (
massager is paired to phone/tablet.
) when
Controlling esca Via App
1. Download and launch OhMiBod® Remote App.
AVAILABLE FOR DOWNLOAD ON:
2. Blue
indicates connection to phone/tablet. Initial App instructions pop-up upon first use.
Connected to phone/tablet
Additional information provided
“in App” on Support.
Connect long distance via WI-FI
ADDITIONAL SUPPORT can also be found at: OhMiBod.com/app.
Charging esca
Simply plug the USB charging cable provided with esca into the USB port on your computer or
USB wall charger adapter. Connect the other end of the cable into the charging socket on the end
of esca (see diagram). The LED on esca will blink indicating the massager is charging. Please be
sure that the massager is completely dry before charging.
≈ 1.5-2 HRS TO REACH FULL CHARGE
LED will glow steady (
) when fully charged.
NOTE: The USB port is for charging use only, no data transmission functionality. When product
is charging, the product will not be able to vibrate until the USB cable is removed from
charging socket.
Additional Charging Safeguards
• Please be sure that the massager is completely dry before charging.
• Only use the charging cable provided to charge the massager.
• Do not use USB charging hubs to charge the massager.
• Only use with UL certified USB wall chargers.
Troubleshooting
If the LED does not blink when the product is connected to the USB cable, check to make sure
the USB cable is properly connected to the USB port and esca.
Battery Disposal
• Esca contains a rechargeable battery. Please do not dispose of this product with normal
household waste.
• Please dispose of this product at the appropriate electrical and electronic equipment recycling
disposal locations in accordance with government regulations.
• The recycling of this product appropriately will help to protect our environment.
ESCA
Materials: Body-safe Silicone, ABS
Size: 7.3” length, 1.3” diameter
(185.4mm length, 33.1mm diameter)
Weight: 1.9 oz. (56g)
Battery: Lithium-ion, 3.7V with 130mAH
Charging: 1.5-2 hours
User time: half an hour
WIRELESS SPECIFICATIONS:
Bluetooth® Version 2.1+EDR
Frequency: 2.402-2.480GHz
Receive sensitivity: Better than -90dBm
Range: 26ft (8m)
Data rates: Up to 3Mbps (over the air)
UART data transfer rate: 115200bps
Care and Cleaning
• esca is splash proof only. When cleaning, avoid submerging in water and getting any
water into the charging socket.
• Clean after every use with mild soap and water. Dry thoroughly.
• Store in privacy pouch to keep esca clean and safe until next use.
Important Safeguards
• Do not use on areas that are swollen, inflamed or have skin lacerations.
• Stop using the massager if you experience pain or discomfort.
• Do not submerge in water.
• Do not sure while bathing or in the shower.
Warranty
OhMiBod warrants this product for a period of one (1) year from the date of original purchase,
against defects due to faulty workmanship or materials. In the event that this product fails during
the warranty period, simply email us at customercare@ohmibod.com and provide us with a valid
proof of the date of original purchase and we will replace the faulty product at no extra charge.
This warranty does not cover cosmetic deterioration caused by normal wear and tear or damage
caused by accident, misuse, neglect or other use not in accordance with this instruction manual.
Any attempt to open or take apart this product or its accessories will void the warranty.
Contact Us
If you have any questions regarding your new product, please check out additional information at
www.ohmibod.com/customercare. You can also reach us via email at customercare@ohmibod.com.
No medical claims are warranted or implied by the use of this product.
Special Note from Founder
“OhMiBod’s goal is to reflect the collective personality of our customers
who have an open, honest attitude toward sexuality and personal pleasure.
My hope is that OhMiBod becomes a symbol of liberation, reflecting new and
progressive attitudes toward personal pleasure for the young and the young at
heart...People who are comfortable with their bodies, know what feels good
and who, not only aren’t afraid to admit it, are empowered to go after it.”
FCC ID: XG5OMBES01
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
CAUTION: The user is cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
Copyright© Suki, LLC 2017. All rights reserved.
Designed in the United States / Made in China

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Language                        : en-US
XMP Toolkit                     : Adobe XMP Core 5.6-c067 79.157747, 2015/03/30-23:40:42
Create Date                     : 2017:08:18 12:09-04:00
Metadata Date                   : 2017:09:25 12:22:08+08:00
Modify Date                     : 2017:09:25 12:22:08+08:00
Creator Tool                    : Adobe InDesign CC 2017 (Macintosh)
Thumbnail Width                 : 256
Thumbnail Height                : 208
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 13049 bytes, use -b option to extract)
Instance ID                     : uuid:fc41dbfb-89e4-4da7-90a7-5a976e6c265e
Original Document ID            : xmp.did:13c0c246-cf28-467b-85af-2ba204479ce4
Document ID                     : xmp.id:84b16a38-6eec-4442-a194-488efed7765d
Rendition Class                 : proof:pdf
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Macintosh)
History Changed                 : /
History When                    : 2017:08:18 12:09-04:00
Derived From Instance ID        : xmp.iid:9e57c8cd-0028-4b11-bf7e-4d0725acc8d2
Derived From Document ID        : xmp.did:13c0c246-cf28-467b-85af-2ba204479ce4
Derived From Original Document ID: xmp.did:13c0c246-cf28-467b-85af-2ba204479ce4
Derived From Rendition Class    : default
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 109.999993
Max Page Size H                 : 88.999838
Max Page Size Unit              : Millimeters
Font Name                       : Helvetica, HelveticaNeue-Bold
Font Family                     : Helvetica, Helvetica Neue
Font Face                       : Regular, Bold
Font Type                       : TrueType, Open Type
Font Version                    : Version 1.3 (Hewlett-Packard), 001.101
Font Composite                  : False, False
Font File Name                  : Helvetica.ttf, HelveticaNeue-Bold.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Page Count                      : 18
Creator                         : Adobe InDesign CC 2017 (Macintosh)

EXIF Metadata provided by EXIF.tools