ZIJIANG ELECTRONICS ZJ-8001DD Portable Thermal Printer User Manual 15 ZJ 8001DD UserMan r1

Download:
Mirror Download [FCC.gov]
Document ID	3445849
Application ID	TPmmhHhYfACAtUKtyXZC5A==
Document Description	15_ZJ-8001DD UserMan r1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	243.51kB (3043899 bits)
Date Submitted	2017-06-30 00:00:00
Date Available	2017-06-30 00:00:00
Creation Date	2017-02-14 16:20:23
Producing Software	Corel PDF Engine Version 14.0.0.701
Document Lastmod	2017-06-28 15:12:40
Document Title	80MINI 中性版 英文说明书 2017-02-14
Document Creator	CorelDRAW
Document Author:	Administrator

Version
Feb, 2017
Notice
80MM Portable MINI Thermal Printer
All rights reserved. Reproduction of any part of this manual in any form
whatsoever, without manufacturer’s express permission is forbidden.
The contents of this manual are subject to change without notice.
Instruction Manual
All efforts have been made to ensure the accuracy of the contents of
this manual at the time of going to press. However, should any errors
be detected, manufacturer would greatly appreciate being informed
of them.
The above notwithstanding, manufacturer can assume no responsibility
FCC ID: RVUZJ-8001DD
for any errors in this manual
Declaration
We have been carefully handling the manual and trying our best to
ensure the accuracy of the contents of this manual. But we still c an’t
promise it is always correct due to our products are being improved and
updated all the time. The contents of this manual will be updated without
notice at any time.
All of our products must be used under environments/locations which
are taken care by human being. We are not responsible f or a ny loss or
damages caused by any accident while the products are used without
taken-care by human being. If there are any products failures c aused by
human behaviors or natural disaster, we will not provide or just provide
partial free maintenance.
Please contact local agents for the latest information of the products.
Instruction Mannual
80MM Portable MINI Thermal Printer
1.Features & Application area
Notes on safety
This section presents important information intended to ensure safety
and effective use of the printer. Please read carefully.
Be sure to use the specified battery and power source provided by our
company. Connection to an improper power source may cau se fire ,
explosion or damage to the printer.
Don’t put the battery into the fire or water, don’t disassemble or modify
the battery, don’t be short circuit, otherwise may result in injury or f ire
even explosion.
一．Features
It can print 80mm width thermal paper
Paper dimensions 40mm
High-speed,Clear printing
Super power lithium electricity, standby time can reach 5-6 days
Auto sleep, auto awake, save electricity
Small size、light weight、reliable performance、simple to connect、
easy to use
Please don’t open the paper room cover when it is printing or just when
二．Application area
printing is over, do not touch the print head with hand or body, overheat
Relative to the traditional thermal receipt printer, Mini portable printer
has smaller body, more reliable capability, more convenient printing and
portable advantages. The Mini printer can be worked on a lots of locations,
such as the TAXI bill printing, administrative fees receipt printing, post
receipt printing, restaurant ordering information printing, online payment
information printing, etc. With the rapid popularity of smart-mobile, Mini
printer will be more widely used in the near future.
may cause scald.
Notes on using
1、 Do not store the printer in hot and humid conditions.
2、 The lithium battery have a character that if it is not used for several months,
it possibly can’t be charged ever. So for that, we suggest to use the adapter
2.Specification
what less than 1A for charging .
3、 The printer’s power adapter is to be connected to a stable power 110~220
Volts, please do not use other devices on the same power socket, to avoid
PrintingMethod: Direct Line Thermal
voltage fluctuations.
4、 Avoid water or conductive material (for example: metal). If water is present
on the surface please turn off the power immediately.
5、 Please ensure that a thermal paper roll is always inserted in the printer to
avoid damaging the printing roller and the printer head.
6、 Please ensure that your printer is serviced and repaired by a qualified
technician. No responsibility is taken for misuse and/or non-qualified
servicing.
7、In order to ensure print quality and longevity of your printer, please ensure
that only good quality thermal paper rolls are used.
8、Please keep this manual in a safe place, where it can be accessed easily
and used for your reference.
Speed:≤90mm/sec
Reliability TPH Life: 100000000 pulse / dot or 100km
Resolution: 203DPI (8dot/mm)
Printing Width: 72mm (576dot)
Paper Width: 79.5±0.5mm
Paper thickness: 0.06-0.08 mm
Roll Diameter: φ≤40mm
Power: rechargeable lithium battery/NI-MH battery
Battery: 7.4VDC, 2000mAh
Charging method: external charger
Instruction Mannual
80MM Portable MINI Thermal Printer
Print parameters: support to download the Logo trademark
Charging: Red Light
Full: Blue Light
FontA:12*24dots,1.5(W)*3.0(H)mm
Size:103*100*46 mm
FontB: 9*17dots, 1.1(W)*2.1(H)mm
Weight:260g(with Battery)
FontC: 9*24dots, 1.1(W)*3.0(H)mm
Simplified/Traditional:24*24dots,3.0(W)*3.0(H)mm
Printing Chinese character: Chinese: simplified Chinese 24x24 point. support
GB18030 font library, support Taiwan and HK traditional(complex font)
ANK: ANK characters
Extended character table:
OEM437/Katakana/OEM850/OEM860/OEM863/OEM865/West Europe/Greek/
Hebrew/EastEurope/Iran/WPC1252/OEM866/OEM852/OEM858/
Size:102*108*43.5 mm
IranII/Latvian/Arabic/PT1511251/OEM747/WPC1257/Vietnam/OEM864/
Weight:285g(With Battery)
Hebrew/WPC1255/Thai
Charging: Red Light
Full: Blue Light
Emulation: ESC/POS command
Line spacing: 3.75mm (Default)
Interface: Serial, USB, Bluetooth 2.0/Two-mode Bluetooth (optional)
Driver: Win2003/Win2000/WinXP /Win7/WIN8/Win10/LINUX/Android
Working Temperature: -10～50℃
Humidity: 10～90%
Weight: 260g
Barcode Types:
1DBarcode: UPC-A/UPC-E/JAN13(EAN13)/JAN8(EAN8)/CODE39/ITF/
4.Communication Interface
CODABAR/CODE93/CODE128
2D Barcode:QR CODE
3.Appearance
1. RS232(COM)：standard RS232 Communications Protocol
2. USB：standard USB Communications Protocol
3. Bluetooth 3.0: General Bluetooth3.0 Communication Protocol Twomode Bluetooth: General Bluetooth3.0 / 4.0 Communication Protocol
Instruction Mannual
5.The installation of the paper roll
The printer use 80MM thermal paper, and adopt to easy paper loading. So
the paper is very convenient install.
Paper diameter Max 40mm.
80MM Portable MINI Thermal Printer
Under power on, the paper feeding begins when press
【F E E D】b u t t o n
Power off the printer, then hold down the【FEED】
button and press the power button at the same time.
Wait 2 seconds ,then loosen the【FEED】button,
the current setting will be printed out.
the printer paper feed
The printer Self test
Thermal paper installation method is as follows:
（1） Open the printer top cover
（2） Thermal Paper as follow Graph to put into paper storehouse
（3）Put out a little of the paper outside printer,then close the top cover.
（4）Use paper sawtooth tear off redundant paper
Button Operating Instructions
（Blue Light）
ERROR(Red Light）
CHARGE(Red Light
/ Blue Light)
Printer Status
Power off the printer, then hold down the【FEED】
button and press the power button at the same time.
Wait until the power indicator & 【ERROR 】led are
both on, and then 【ERROR】led goes off, then
loosen the【FEED】button, the language setting
status will be printed out.
Power off the printer, then hold down the【FEED】
button and press the power button at the same time.
Wait until the power indicator &【ERROR】led are
both on, and then 【ERROR】led goes out, after,
【ERROR】led goes on again ,then loosen the
【FEED】button, the density setting status will be
printed out. (It has three levels setting for printing
density, it is a circle Low levelMiddle levelHigh
levelLow level…, Please switch the density
status by repeating operation presented above.)
OFF
OFF
OFF
Printer Close
Flash
OFF
OFF
Printer dormant
and press the power button at the same time. Wait
ON（Always）
OFF
OFF
Printer open and have paper
until the power indicator &【ERROR】led are both on,
ON（Always）
Flash
OFF
Printer Open , without paper
CHARGE(Red Light)
Charged with Battery
CHARGE( Blue Light)
Full of Battery
Display 1 or 2 shelf
Low power of Battery
Hold down power for 3 seconds
Printer OPEN/OFF
Transformation in both
English and Chinese
Set printing density
Power off the printer, hold down the【MODE】button
and then 【ERROR】led goes out, then loosen the
【MODE】button. The printer turns into the hexadecimal
printing mode and print the presentation.Way to quit
hexadecimal printing : The way to quit hexadecimal
printing mode is switch off the printer .
Hexadecimal printing
80MM Portable MINI Thermal Printer
6.Operating Manual for Android OS
7.Operating Manual for IOS APP
This manual applies to all of our android OS compatible printers ( both
58mm & 80mm width printer)Currently, the common communication ports we
1. Download the Test Tools “POS-PrinterV1.0” from App Store,as below:
used for android OS are ( USB、Ethernet、Bluetooth)
If you want to use Android Device connected with our printer, fiIf you
want to use Android Device connected with our printer, first of all make sure
that printers can be supported Android Operate System, proceed as follows
( Bluetooth as example):
Step 1:
- Insert the CD driver disc into the CD-ROM, connect your Android device
with your computer;
( Image1)
Step 2:
- Find the File Named “ SDK” from the CD driver, Then follow the path :
“ Android SDK--- BLUETOOTHDEMO ---bin---BT-POSPrinter.APK “,
and install it into your Android device.
2. Turn on the Bluetooth setting of IOS device , then click “POS-Printer”:
Step 3:
- Connect your Android device with our printer once the installation done .
Step 4:
- Find this icon
on the Android device, and click “Connect Printer”
to search the Bluetooth printer, (Default pairing password for Bluetooth
connection is “ 1234” ) . After the connection successfully, click on the "
Print Test Page", the printer will work
( Image 2)
3. Into the App of “POS-Printer”, select the paper width as below:
If you use the "Ethernet interface", "USB", communication, replace
"BLUETOOTHDEMO" from "Step 2" into the corresponding "NETDEMO",
"USBDEMO" and "WIFIDEMO".
Please noted, the customers can get all the original code from
below path if you need to develop your own APK ( Path is:
src
com
zj
printdemo )
Instruction Mannual
80MM Portable MINI Thermal Printer
5, If connect with Bluetooth, then you can click “ Select Printer” first, you will
search the “Bluetooth Printer” (the default name of printer is Bluetooth
Printer), click it to be connected.
(Image 3)
4. Select the way of communication of printers, “Bluetooth” :
10
Instruction Mannual
80MM Portable MINI Thermal Printer
9, Other features of this APP:
① Send HEX: In the text box, enter the hexadecimal data, click “Send HEX”,
then can send text box hexadecimal data to the printer.
② Print Image mode: input data in the text box, click "Print Image mode",
you will be able to convert the contents of the text box into a image printed
③ Open Casher: If your printer is connected with the cash drawer, click "
open casher", the drawer will be opened (portable printers without drawer
interface, this feature does not work).
④ Cut paper: After click on it, the paper will be feed out and cut (portable
printers, 58 series of printers without cutter, this feature does not work).
⑤ Self Test: Click the "self-test", the printer will print out a self-test page
(because the Bluetooth printer has been connected to the device, then]
the Bluetooth name or MAC address will be not displayed in the self-test
page ).
⑥ Beep: Click the "Beep", the printer will beep sound (portable printers,
58 series of printers without buzzer, this feature does not work).
⑦ Print test page: Click the "Print Test Page", the text will print a section
of the test, to confirm that the printer is connected and normal print
successfully.
9.The applicable version: can be compatible with IOS6.0 or above versions.
6, If above steps are successful, then you can print text to have a test:
8.The Bluetooth configuration
Step1: Make sure your device ( like PC, Note Book ) has B luetooth function,
then once the Bluetooth for your device is activated, you will see the Bluetooth
sign
showed in the right bottom side of your device(like PC) screen.
11
12
Instruction Mannual
80MM Portable MINI Thermal Printer
Step2:Power on the Bluetooth printer.
Step3:To add the Bluetooth printer, please left-click the
click “Add
a Bluetooth Device” ,then you will enter wizard screen , please choose “My
device is set up according and ready to be found”click “Next”(showed as below).
Step5:Once the Bluetooth printer is found. You can see it listed on the screen,
click “Next”
Step6:Choose “Let me choose my own passkey”, then enter “1234”(this is
Step4:if you can see screen as below,then the device is searching the bluetooth
printer,please wait.
13
factory default passkey, if you want to change it, you have to inform us to
set the new passkey for you in our factory before shipping),then click “Next”.
14
Instruction Mannual
80MM Portable MINI Thermal Printer
9.How to use the ports of USB/Serial(RS232)
Note:
Ensure the printer is working before using,and paper is put on the warehouse.
1、Enter the DC driver,click the related files(printer driver software of 58mm/
80mm series)and install.the installation language will be shown as below:
Step7:if you can see the screen as below, that means the Bluetooth printer
is already connected. Please notice the assigned COM ports ,then Click”Finish”.
( Note: The Bluetooth device will automatically assign a COM port.)
Step8: Now if you want to test if the printer is OK to print, you could use a
com tool , and send printed data to Outgoing COM port( just as above image
shown: COM5).
(Com tool setting is 9600,N,8,1.)
15
16
Instruction Mannual
2、Select the language you need and click the button”Confirm”,and show
the imgae as below,then click the button”next step
3 、please read the related terms carefully,and install it as agreement as
below
17
80MM Portable MINI Thermal Printer
4、Click”next step” ans show as below(customer is available for modifying
channel of driver installation or default one)
5 、Click the button”next step”again and show as below and install it:
18
Instruction Mannual
6、After installation,the related interface will be shown as below,select
80MM Portable MINI Thermal Printer
8.Finish the driver installation as below:
operation system of your computer and printer model,click”USB port for
testing”, if you communication with USB port, USB port of computer will
be identified automatically .Click he button”next step”and install
continuously as below :
9.2 Serial port to be used (if you choose a serial print)
1. Open the Printer Properties screen, and then select the "Port" item, as
shown below:
7、Click the button”Start Installation” and shown as below. And select
installation:
19
20
Instruction Mannual
80MM Portable MINI Thermal Printer
2. Select the list of ports "COM1" → "Configure Port", the printer factory
default settings as shown below:
Click "Apply" again.
3.Return to the "General" tab, click "Print Test Page" as shown below:
You can see the setting parameters of serial port from self-test page, Click
"Apply", then click "OK" (Note: This setting must consistent with the setting
parameters of serial port from the printer self-test page, otherwise it will be
garbled case) appears as shown below:
21
22
Instruction Mannual
80MM Portable MINI Thermal Printer
If the printer prints a normal page, then it shows that the work was successful.
If you feel the print speed is slow, please click on the "Device Settings" →
"Print Mode" → Choose "soft font" button as shown below:
10.Cleaning of printer head
Cleaning of printer
When the printer has the following conditions, you should clean the printer head:
① The printer does not print clearly and the thermal paper is Ok.
② The printer Print pages lengthways is not clear
③ It’s getting too noisy while feeding paper or printing.
Printer head cleaning steps are as follows:
1. Power off the printer and open the paper room cover. Remove the thermal
paper roll.
2. If the printer just finished printing , please wait for the print head to cool
down.
3. With a soft cotton cloth dipped in ethanol (please make sure there is no
dripping), wipe the thermal printer head gently and remove any dust or
stains.
23
24
Instruction Mannual
4. Wait for the complete evaporation of any ethanol, then place the thermal
paper roll back in the printer and close the paper room cover, then print a
test page.
Notes：
80MM Portable MINI Thermal Printer
7. Printing speed is very slow for serial printer
A: follow this path and change the set accordingly : Driver -- Properties -Device Settings -- Print Mode -- Print as soft font.
8. Water or other liquid spills into the printer
When the printer maintenance must ensure that the power is shut down
Hands or other metal tools away from the surface of the printer head,do not
use tweezers to scratch the surface of the printer head and other sensitive
parts.
Do not use gasoline,acetone and other organic solvents for printer head
cleaning.
A: Cut off the power,we can dry the main board or printer head with a hair
dryer, careful of the temperature ( average 50 degree is ok )
9. The printer can't work
A：The battery maybe without electricity，please use power adapter to
charge. Then you try to star the printer, if the printer has same problem, please
send to service center for repair.
11.General Troubleshooting
10. Can not search the Bluetooth printer
A：Please check the equipment "Bluetooth" function whether opened, the
1: Why serial port printer printing messy code?
communication whether normal, then replug the printer "Bluetooth Module"
A: Ensure the baud rate setting in the PC is same as the printer baud rate.
try to connect and search “Bluetooth” again, if the problom are still existed,
( we can see printer baud rate from self test page)
please send the specified location repair.
2: Self printing test is ok,but printer does not work after driver installation.
A: Recheck the installation according to above installation wizard and see if
we selected the right port or ask service center for advice if needed.
3: Malfunction of paper feeding?
A: Use soft brush to clean the paper sensor and try again or send it to the
service center for repair.
4．Malfunction of the indicator light
A: Check the cable connecting way / adapter / power cord / switch on or off?
Or contact the service center for repair.
5．Messy code printing except Arabic numeral printing.
A: language switching incorrectly, please use our tool "IPrinter" (you can find it
on the enclosed CD) to change the language what you want print.
6．Red indicator keep flashing during the printing.
A: Usually it is due to the high temperature of the print head. If printing
stopped,please contact the service center for repair.
25
26
FCC warnings:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Administrator
Create Date                     : 2017:02:14 16:20:23+08:00
Modify Date                     : 2017:06:28 15:12:40+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Format                          : application/pdf
Creator                         : Administrator
Title                           : 80MINI 中性版 英文说明书 2017-02-14
Creator Tool                    : CorelDRAW
Metadata Date                   : 2017:06:28 15:12:40+08:00
Producer                        : Corel PDF Engine Version 14.0.0.701
Document ID                     : uuid:2d5cc068-508a-4cdc-8cd1-730310360569
Instance ID                     : uuid:93c21340-562f-4ceb-b84b-74c7ec5f2fb2
Page Count                      : 15

EXIF Metadata provided by EXIF.tools