ZMODO Technology CJCFT Door Sensor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3013082
Application ID	325oWNMCW1aGFA35IvNuPg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.95kB (274351 bits)
Date Submitted	2016-06-01 00:00:00
Date Available	2016-06-01 00:00:00
Creation Date	2016-05-13 09:49:18
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2016-05-13 09:49:18
Document Title	User Manual
Document Creator	Microsoft® Office Word 2007
Document Author:	Angelina lan

Door / Window Sensors
Quick Start Guide
1 Getting to know your Sensors
2 Mobile Setup
This quick start guide will help you configure your door / window sensors. Take Pivot as an
example, the sensors is configured in the Pivot settings menu.
1 After your Pivot is successfully configured, tap the “Setting” menu on the right upper corner of
the interface.
2 Select the “Accessories” menu in the middle of the screen, and tap it.
3 Press the Add Device option (+) to add the sensors.
4 Press the button of the larger sensor on one side.
5 Name your Sensors and set a password for it if you need. Tap √ to complete the setup.
3 Installing your Sensors
1 Remove the plastic tab on the bracket.
2 Install the larger sensor on the door or window frame, and the smaller sensor on the moveable
part of the door or window. When closed, the maximum distance between the two sensors
should be 2cm.
Note: When a door or window is opened and the distance between the sensors is beyond 2cm,
Pivot can automatically turn to see what happened, and send an alert message to your
smartphone.
4 Support
Having difficulty?
For more instructions, troubleshooting, support, and other resources, please visit:
www.zmodo.com/support
5 Connect with us!
Like us on Facebook.com/Zmodo
Scan the QR-code below
Follow us on Twitter @Zmodo
Scan the QR-code below
6 Import Information
This equipment has been tested and found to comply with the limits for a Class B digital device, p
ursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection a
gainst harmful interference in a residential installation. This equipment generates, uses and can r
adiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that in
terference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be d
etermined by turning the equipment off and on, the user is encouraged to try to correct the inter
ference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is co
nnected.
-- Consult the dealer or an experienced radio/TV technician for help.
changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 5
Language                        : zh-CN
Tagged PDF                      : Yes
Author                          : Angelina lan
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2016:05:13 09:49:18+08:00
Modify Date                     : 2016:05:13 09:49:18+08:00
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools