ZMODO Technology H0018 Smoke Detector User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	3653000
Application ID	zxB33fNWcnV+xkKNiT6n6A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	49.11kB (613889 bits)
Date Submitted	2017-11-26 00:00:00
Date Available	2017-11-26 00:00:00
Creation Date	2017-11-16 15:44:29
Producing Software	Corel PDF Engine Version 16.1.0.843
Document Lastmod	2017-11-16 15:44:29
Document Title	未命名 -1
Document Creator	CorelDRAW X6
Document Author:	tina ye

SA-H 0018 烟雾报警器 快操 REV-A00
尺寸：75*90mm（成品尺寸）
材质:105g双铜+双面印刷4C +折页
The Zmodo Smart Accessories Kit provides a full solution to
monitor your home. All devices can be connected and
controlled through the Zmodo app. The following describes
the main features of this system.
Mount your detector high on walls or ceilings.
Smoke Detector: When paired with a Beam, the smoke
detector alerts you with audible warning sounds and a
phone notification when smoke is detected.
In order to optimize performance, do NOT install near
windows, doors, or vents.
2 Insert one CR123A Battery (included) into the battery
Wall-mounted detectors should be installed no further than
12 inches away from the ceiling.
compartment.
3 In order to connect the smoke detector, access your smart
hub's Device Settings and select the "Accessories" option.
Select the + Add Accessory option, follow the on-screen
instructions, and when prompted, press and hold the button
on the detector for 3 seconds. When the status light is
blinking red and the alarm sounds, release the button, and
the detector will be paired with your Beam.
1 Turn the smoke detector clockwise and separate it from
the mounting bracket.
Quick Start Guide
1.Mount and Connect your Smoke Detector
Find a suitable location to install your smoke detector, and
follow the instructions for installation.
Smoke Detector
Tips:
Press here
If you are installing in the basement, the detector should be
installed on the ceiling at the bottom of the stairs leading to
the next floor.
Note: The Status Light will blink red when the smoke detector has
low battery.
Install at least 10 feet away from cooking appliances to
minimize false alarms.
Referring to the placement tips, find a suitable location
for your smoke detector and install the mounting
bracket with the provided screws.
Fasten the smoke detector onto the mounting bracket.
When in use and working properly, the status light will blink
red every 48 seconds. When smoke is detected, the light
will blink red, the alarm will sound, and you will receive a
notification on your phone. You can deactivate the alarm
from the mobile app or by pressing the button on the
smoke detector.
3. Connect with us!
2. Support
Having difficulty?
For more instructions, troubleshooting, support, and
other resources, please visit:
Like us on Facebook.com/Zmodo
Scan the QR-code!
www.zmodo.com/support
Note: The line shown in red will be parallel to the edge of the
smoke detector when the smoke detector is placed onto the
mounting bracket. Make sure that this edge is parallel or
perpendicular to the wall for aesthetic
14 purposes.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Follow us on Twitter @Zmodo
Scan the QR-code!
16
– Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
REV-A00

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 1
Create Date                     : 2017:11:16 15:44:29+08:00
Modify Date                     : 2017:11:16 15:44:29+08:00
Producer                        : Corel PDF Engine Version 16.1.0.843
Author                          : tina ye
Creator                         : CorelDRAW X6
Title                           : 未命名 -1

EXIF Metadata provided by EXIF.tools