ZMODO Technology H2405 Smart Sprinkler Controller User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	3657904
Application ID	ITxYnvYjbEIFr1kfAKw07Q==
Document Description	Users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	79.32kB (991546 bits)
Date Submitted	2017-11-29 00:00:00
Date Available	2017-11-29 00:00:00
Creation Date	2017-11-01 14:29:16
Producing Software	Corel PDF Engine Version 16.1.0.843
Document Lastmod	2017-11-01 14:29:16
Document Title	未命名 -1
Document Creator	CorelDRAW X6
Document Author:	Sharon liu

1 Getting to know your Smart Sprinkler
What’s in the box:
2 Preparations before configuring:
Controller
Charge the battery:
The Zmodo Smart Sprinkler Controller gives you the
power to control your sprinklers from anywhere with your
smartphone. It allows you to water up to 3 areas from one
faucet, and can automatically water your lawn based off
of scheduling, weather, and more.
“AP_ZMD”
Please follow the steps below to charge your battery, and
make sure that the battery is fully charged before
configuration.
Follow the on-screen instructions and
select “Tap here to begin setup” to go
to the WiFi settings page on your
smartphone.
AP_ZMD
Beam
Smart Sprinkler
Controller
Rechargeable
Battery
Plug in the charging pad to a power outlet using the
included USB power adapter.
Place the rechargeable battery onto the charging pad.
Refer to the status light on the Charging Pad to make sure
the rechargeable battery is properly placed and charging.
The app will automatically search for
your Beam and connect it to the WiFi
network. This may take a few
minutes.
10
Name your Beam and set a password
for it. Tap √ to proceed.
Beam Placement Suggestions
Note: The password provides an additional layer
of security for your devices. You will not need to
use this password when accessing your devices
from the Zmodo app. It is not required, but it is
highly recommended.
Selecting a location for your Beam:
Select the network named “AP_ZMD”
and connect to it.
If this app interface appears, please
press “Tap here to select WiFi”.
Note: If you see a "No Internet Connection" error
message, please ignore it and connect anyway.
Note：Align the battery with the grooves on the charging pad.
Smart Sprinkler
Controller
Smart Sprinkler
Controller
Quick Start Guide
Coupler
Manual Control Button
Valve Status Light*
Valve Output
*The status light will indicate which valve is currently active.
Quick Start Guide
Waterproof Ring
for Battery Cover
(Spare unit)
Charging Pad Status Light Definitions
Gasket (2)
Quick Start
Guide
The battery is charging.
For detailed instructions and troubleshooting, please visit:
Select the WiFi network that your Beam
will connect to, and connect to it.
Return to the Zmodo app once your
mobile device is connected to the WiFi
network.
11
Your Beam has been successfully
configured! Your Beam will share the
same WiFi network name
(SSID) and WiFi password as your
wireless router. If you change your
WiFi router SSID and
password, you will need to
reconfigure your Beam.
Tap √ to proceed.
Blinking Blue
Return to the Zmodo app page and
select or enter the SSID and password
of the WiFi network that you want your
Beam to connect to.
Note: The WiFi name and password are casesensitive.
(Only one is
requiredfor installation,
the other is a spare)
The Smart Sprinkler Controller is a smart accessory and
connects to your WiFi network through the Beam. Follow
the instructions below to configure your Beam and Smart
Sprinkler Controller.
Solid Blue
Spare Screws (1)
3 Mobile Setup
Solid Red
The charging pad is powered on.
Log in and press + in the upper
right corner. Select "Add Device".
4 Installing your Smart Sprinkler Controller
Install the gasket to the coupler.
Turn the faucet on. You can leave the faucet on as long as
your controller is installed. Attach a hose to each output
valve that you would like to use.
Remove the batteries at the end of each watering
season or if your Smart Sprinkler Controller will not be
used for an extended period of time.
Please use only cold and clean water.
The working temperature of the controller is 0°C~40°C /
32°F~104°F and the working water pressure is 25
PSI~100 PSI.
Using a Phillips screwdriver, loosen the screws on the
battery cover which can be found on the back of the
controller. Slide to remove, as shown below.
6 Support
Before you begin:
Place your Beam within range of your wireless router.
Make sure that you have a strong WiFi connection.
Insert the battery into the Controller:
2 Insert the battery, making sure that it is aligned with
the grooves inside of the controller. Fasten the screws
and make sure that the cover is tightly secured.
Having difficulty?
Make sure you know the SSID (WiFi network name) and
password of the 2.4GHz WPA-PSK/WPA2-PSK WiFi
network that you want your Beam to connect to. Your
network cannot be hidden.
Download and install the “Zmodo” app from Google
PlayTM or the App StoreTM (compatibility: iOS 7.0+ or
Android TM 4.0+). Launch the app and sign up for a free
Zmodo account. All of your devices will be bound to this
account.
Zmodo
Plug Beam into a power outlet, and wait for the LED to
blink white.
Attach the Controller to a faucet, and turn the couple
clockwise to tighten it. Please do not over-tighten the
coupler.
You can use the Live Chat function in Zmodo app if you
have any technical problems.
Please follow the steps below:
Access the “Me” page in the bottom right corner of the
Zmodo app and select “Zmodo Support”.
5 Operating Tips
For more instructions, troubleshooting, support, and other
resources, please visit:
Press one manual control button at a time, and wait 1
second before pressing another manual control button
to avoid damage to the controller.
We recommend that you use one output valve at a time.
If three outputs are used simultaneously, the water
pressure may not be strong enough to adequately water
each zone.
Turn off the faucet if your Smart Sprinkler Controller will
not be used for an extended period of time.
Select the “Tap here to add a Beam”
option at the bottom of the page to
connect your Beam. Your Beam will
be added to your Zmodo account.
The following tips will help you optimize your Smart
Sprinkler Controller's performance.
Make sure that the Beam is within range of your WiFi
router and within reasonable distance to your Smart
Sprinkler Controller.
Avoid a location with electronic appliances that
generate strong magnetic or electric fields, such as
microwave ovens or refrigerators.
Safety Requirements:
Keep away from sources of heat and fire, i.e. a space
heater or candle.
Place in a cool and well-ventilated indoor area.
Do not expose to direct sunlight.
If water or liquid damage occurs, unplug the Beam
immediately and contact Zmodo support.
11
www.zmodo.com/support
Like us on Facebook.com/Zmodo
Scan the QR-code below!
Android is a trademark of Google Inc. Google Play is a trademark of Google
Inc. Apple, the Apple logo, and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries. Apple Store is a service mark of
Apple Inc.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for helpThis
device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions (1)this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Follow us on Twitter @Zmodo
Scan the QR-code below!
Charge the battery every 3 months, and remove the
batteries if your Smart Sprinkler Controller will not be
used for an extended period of time.
We are constantly working to improve our product and app. Please visit
www.zmodo.com/support for updated instructions, manuals, and more.
During configuration, keep your Smart
Sprinkler Controller close to your
Beam. Access your Beam's Device
Settings page and select the
"Accessories" option. Select the + icon
to add the Smart Sprinkler Controller.
Follow the in-app instructions and
when the app prompts you to press a
button, press any of the manual control
buttons to pair it with the Beam.
10
www.zmodo.com/support
The battery is fully charged.
Power
Adapter
Charging
Pad
12
If you do not see this screen, please
proceed to step 8.
You will be able to view the battery status from the Zmodo
app when the sprinkler controller is in use.
The Smart Sprinkler Controller is a Zmodo smart
accessory, and can be paired with the Beam smart hub
device to function.
If you see this screen, the app will
connect your Beam to your WiFi
network. This may take a few minutes.
Once it’s completed, please skip to
step 11.
12
13
14
REV-A00

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 1
Create Date                     : 2017:11:01 14:29:16+08:00
Modify Date                     : 2017:11:01 14:29:16+08:00
Producer                        : Corel PDF Engine Version 16.1.0.843
Author                          : Sharon liu
Creator                         : CorelDRAW X6
Title                           : 未命名 -1

EXIF Metadata provided by EXIF.tools