ZMODO Technology SHAZ02W Remote Control User Manual 1
ZMODO Technology Shenzhen Corp. Ltd. Remote Control 1
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3209451 |
| Application ID | NEi8DdaWNJTAAdyFbrn0rA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 45.21kB (565165 bits) |
| Date Submitted | 2016-11-28 00:00:00 |
| Date Available | 2016-11-28 00:00:00 |
| Creation Date | 2016-11-23 14:23:08 |
| Producing Software | Corel PDF Engine Version 16.1.0.843 |
| Document Lastmod | 2016-11-23 14:23:08 |
| Document Title | 未命å -1 |
| Document Creator | CorelDRAW X6 |
| Document Author: | tina ye |
757880243 ZM-SHWZ01W 遥控器 快操 REV-A00 尺寸：55*75mm（成品尺寸） 材质:105g双铜+双面印刷4C +折页 Getting to know your Remote Control The Zmodo Remote is a smart accessory that allows you to quickly control your Zmodo devices. When connected to a Zmodo smart hub, the remote will allow you to toggle notification modes with the press of a button. Note: The remote connects to a Zmodo smart hub, and will only work when in range with your smart hub Mobile Setup Method 1: Configure using your smart hub device settings. This quick start guide will help you configure your remote control for initial use. For detailed instructions and troubleshooting, please visit: Before you begin: Make sure that you have a strong 915MHz connection at the location of your sensor. Visit www.zmodo.com/support Make sure that you have a Zmodo smart hub configured to your account. Select your smart hub device and access the Device Settings tile. Method 2: Configure using the Add Device menu. Tap the + icon. Following the onscreen instructions, press any button on the main portion of your Remote Control. Log in and select the Add Device option in the upper right corner. If your remote control stopped working: The app will generate a list of Zmodo smart hub devices on your account. Select the hub that you would like to pair your remote control to, and tap √ to proceed. Name your remote control and set a password for it. Tap √ to proceed. Note: The password provides an additional layer of security for your devices. You will not need to use this password when accessing your devices from the Zmodo app. It is not required, but it is highly recommended. You need to have a smart hub device already added to your Zmodo account. "Home" key “Emergency" key “Away" key Battery compartment “Sleep" key ① Press this key when you are at home. You will not receive alert and sound notifications on your Make sure your smartphone is connected to the 915MHz network that your Zmodo smart hub device is connected Download and install the “Zmodo” app from Google PlayTM or the App StoreTM. Launch the app and sign in with your Zmodo account information. All devices will be Select the “Accessories” option. sound notifications will be enabled for your phone. ③ Press this key when you are ready for bed. Only Name your sensor and set a password for it. Tap √ to proceed. Note: The password provides an additional layer of security for your devices. You will not need to use this password when accessing your devices from the Zmodo app. It is not required, but it is highly recommended. ② Press this key when you leave home. All alert and Remote Control Key Accessory Quick Start Guide Select the “Wireless Device and Smart Kit” connection method, and choose the “Accessories” option to connect your Remote Control. Following the on-screen instructions, press any button on the main portion of your remote control. ④ Pressing the emergency button will enable / disable Note: All modes are set to default settings but can be customized in the app. For more instructions, troubleshooting, support, and other resources, please visit: 正面 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: If you cannot connect your remote control: Follow us on Twitter @Zmodo Scan the QR-code! -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. We are constantly working to improve our product and app. Please visit www.zmodo.com/support for updated instructions, manuals, and more. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Having difficulty? Try connecting your remote control in a location closer to your smart hub devices. sound notifications will be activated, alerting you if In order to work, your remote must be connected to your Zmodo smart hub. Please make sure that you are Like us on Facebook.com/Zmodo Scan the QR-code! 3 Support Make sure that your smart hub devices are updated. Access your Device Settings, and press the “General” option to check your firmware. Zmodo You may need to change your remote control battery. You can check your remote control battery level by accessing your smart hub’s device settings and selecting Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 背面 – Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 1 Create Date : 2016:11:23 14:23:08+08:00 Modify Date : 2016:11:23 14:23:08+08:00 Producer : Corel PDF Engine Version 16.1.0.843 Author : tina ye Creator : CorelDRAW X6 Title : 未命名 -1EXIF Metadata provided by EXIF.tools