ZNV Technology IRIS SECURITY CAMERA User Manual 1

Shenzhen ZNV Technology Co., Ltd SECURITY CAMERA 1

Users Manual

Fast connection 1Wait for 20-30 seconds after the power is switched on, and the camera starts.Insert the power connector of the camera power adapter into the camera power supply.Turn the bulb into the lamp holder and wait for 20-30 seconds to start the system.At this time, the status indicator light is red and has sound prompts.* if the status indicator is not lit, please check the power supply or re plug the power.Line. Make sure that you use the standard power adapter and connector to use it.Its power adapter may cause product failure. Bulb camera, please.Pay attention to identifying the working voltage.2 Touch the camera SET button until the indicator flashes red. Press the SET button on the back of the camera lightly with the thimble, until the camera.The indicator lights flicker red. Run APP to start adding new devices.3 Open APP for prompt operation Click the "+" button on the upper right corner and choose to bind the new device and press the prompt.4 Status and notices of camera indicator light Red light is always bright: system starts red flashing: waiting for WIFI configurationGreen lights: normal networking1.The camera does not currently support 5G WIFI. Please send your router band.Switch to the 2.4G band. 2.Turn off the anti rub network function and turn on the DHCP service. 3.If you open the MAC address filter, please turn off this function first.Once the settings are completed, turn on the camera and add the camera MAC to the white list. 4.A few of the routers do not support WIFI smart configuration function. Please use two Dimension code to add device.5.Devices currently do not support WPA enterprise level encrypted WIFI. Download the "Movistar Iris" in the app store.The latest version of APP. Red light Red light Welcome to use Movistar Iris home products. Please read and understand carefully before using the product.It will help you to use the product safely and correctly. Quick installation instructions Conexión rápida 1Espere de 20 a 30 segundos después de encender la cámara.Inserte el conector de alimentación de energia al adaptador y luego conectelo en la camara, espere 20-30 segundos para encender el sistema. En este momento, la luz indicadora estara de color rojo y emitira un sonido.* Si el indicador no está encendido, verifique la fuente de alimentación de energia. Asegúrese de utilizar el adaptador de corriente estándar y el conector para usarlo. Su adaptador de corriente puede causar fallas en el producto. Preste mucha atencion al voltaje con la que trabaja el dispositivo.2Presione el botón SET de la cámara hasta que el indicador parpadee en rojo.Presione el botón SET en la parte posterior de la cámara ligeramente con “llave”, hasta que las luces indicadoras de la cámara parpadeen en rojo. Ejecute la APP para comenzar a agregar nuevos dispositivos.3 Abra la aplicación y siga las instrucciones. Haga clic en el botón "+" en la esquina superior derecha, seleccione el nuevo dispositivo y siga las instrucciones.4 Estado y avisos de la luz indicadora de la cámaraLuz roja brillando: El sistema comienza.Luz roja intermitente: Esperando la configuración WIFI.Luz verde: Conexión en la red normal.1.La cámara actualmente no es compatible con 5G WIFI. Por favor, selecione la banda de 2.4G. 2.Desactive la función de red antifricción y encienda el servicio DHCP. 3.Si abre el filtro de dirección MAC, apague esta función primero. Una vez completada la configuración, encienda la cámara y agregue el MAC de la cámara a la lista blanca. 4.Algunos de los routeres no son compatibles con la función de configuración inteligente WIFI. Utilice dos códigos de dimensión para agregar el dispositivo.5.Los dispositivos actualmente no son compatibles con WIFI cifrado a nivel empresarial WPA. Descargue la aplicacion "Movistar IRIS" en la app store de su telefono movil, ya sea Android o IOS. Descargue la última versión de la APLICACIÓN.Luz roja Luz rojaBienvenido a usar el producto para el hogar Movistar IRIS.Lea y entienda cuidadosamente antes de usar este producto. Le ayudará de forma segura y correcta. Instrucciones de instalación rápida FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:--Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.The distance between user and products should be no less than 20cm.

Navigation menu