ZTE AC2791V2 cdma2000 wireless data terminal User Manual AC2791 UserMan
ZTE Corporation cdma2000 wireless data terminal AC2791 UserMan
ZTE >
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1750955 |
| Application ID | 3rlbpNDKyHwYk5fnyJbiXg== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 17.7kB (221209 bits) |
| Date Submitted | 2012-07-24 00:00:00 |
| Date Available | 2013-01-20 00:00:00 |
| Creation Date | 2017-10-30 21:31:46 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-30 21:31:46 |
| Document Title | Microsoft Word - AC2791_UserMan.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | JaneChiu |
CDMA2000 1X EV-DO Wireless Data Terminal User Guide CDMA2000 1X EV-DO Wireless Data Terminal User Guide This User Guide is used for Wireless Data Terminal of AC2791. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Copyright Statement Copyright © 2012 by ZTE Corporation All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. ZTE Corporation reserves the right to make modifications on print errors or update specifications in this manual without prior notice. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Table of Contents 1. Introduction............................................................................................................................. 1 2. Precautions.............................................................................................................................. 1 3. Appearance ............................................................................................................................. 2 3.1 Insert R-UIM Card .............................................................................................................. 2 3.2 Operation Guide of Data Cable ........................................................................................... 2 4. Install and Uninstall ................................................................................................................ 3 4.1 System Requirements .......................................................................................................... 3 4.2 Installation Guide ............................................................................................................... 3 4.2.1 Install........................................................................................................................ 3 4.2.2 Uninstall ................................................................................................................... 3 5. Run the Application ................................................................................................................ 4 6. Connect/Disconnect ................................................................................................................ 4 7. NetConnect Log ...................................................................................................................... 5 8. SMS ........................................................................................................................................... 5 9. Phonebook ................................................................................................................................. 6 10. Settings .................................................................................................................................... 7 11. Help ......................................................................................................................................... 9 12. Trouble-shooting .................................................................................................................... 10 13. FCC Regulations.................................................................................................................... 12 14. 4RF Exposure Information (SAR) ....................................................................................... 12 ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 1. Introduction Thank you for choosing ZTE Corporation’s CDMA2000 Wireless Data Terminal (hereinafter referred to as Data Terminal). Data Terminal supports both CDMA2000 1X EV-DO and CDMA2000 1X network. In the area where there is signal, it allows you to go surfing on the Internet, send & receive short messages. The pictures in this help are only used to demonstrate your Data Terminal’s functions, so they are maybe different from what you see on your Data Terminal. Please refer to your Data Terminal if they are differences. 2. Precautions Use the original accessories or those authenticated by the manufacturer. Using any unauthenticated accessories may affect the data terminal’s performance, violate the warranty provisions or relevant national regulations about telecom terminals, or even cause body injury. Do not disassemble, modify, frequently pull/plug the antenna, stretch, rotate or bend the antenna with great force. Before pulling out the data terminal, please use Windows safely removing the hardware and make sure to exit the application. Do not directly pull out the terminal to avoid the damage of data terminal or the influence on the normal operation of operating system. Do not forcefully plug/pull the data terminal to avoid the damage of connector. Do not use your data terminal near weak signal or high-precision electronic devices. Radio wave interference may cause misoperation of electronic devices or other problems. Turn off your data terminal on airplane where it’s forbidden to use it. The data terminal may affect the normal operation of electronic devices, therefore please follow the relevant regulations when using your mobile phone on airplane. Turn off your data terminal in hospital where it’s forbidden to use it. The data terminal may affect the normal operation of medical apparatus, therefore please follow the relevant regulations when using your mobile phone in hospital. Please do not use the data terminal near flammable or explosive materials; otherwise it might cause failure or fire. Keep your data terminal away from water. This may cause overheating or failure if water or any other kind of liquid enters your mobile phone. Please do not use your data terminal near high temperature, damp or dusty place. Keep your data terminal away from children to avoid shock, plunge or impact. It may cause body injury when the data terminal is used as a toy. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 3. Appearance 3.1 Insert R-UIM Card Note: If your data terminal doesn’t need R-UIM card, please skip this section. 1. Pull out the tap； 2. Take out the R-UIM card cover in the direction indicated by the arrow； 3. Insert R-UIM card as below figure； 4. Push back R-UIM card cover. 3.2 Operation Guide of Data Cable Generally, the Data Terminal could be directly connected with USB port. You could also connect the Data Terminal with PC by using the accompanying data cable, as shown in the following figure. Connect Interface with Data Terminal, and interface with PC's USB port. If the power supply from USB port is insufficient, connect both interface and with USB port together. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 4. Install and Uninstall 4.1 System Requirements The Data Terminal supports the following operating system: Windows 2000 Windows XP Windows Vista PC minimum configurations: CPU Pentium-II/233MHz USB interface 2.0 (USB1.0 and 1.1 compatible) Optical Drive CD-ROM (for installation only) Memory 64 MB Disk Space 50 MB (used for installation of application) 4.2 Installation Guide Take Windows XP for example. Under other operating systems, please refer to the installation under Windows XP. Do not insert the Data Terminal before installation. 4.2.1 Install 1. Please connect Data Terminal to PC through USB interface. You could use the data cable to connect. 2. The installation driver will automatically run. Please install according to the installation wizard. 3. The system will automatically find new hardware and install the driver. Wait for a while. Click "Finish" after the installation is completed. Note: Please connect the Data Terminal and PC with USB extension cable under weak signal to obtain the optimal performance. If necessary, adjust the Data Terminal's position. 4.2.2 Uninstall 1. Select Start All Programs ZTEMT Uninstall ZTEMT UI, and you will be asked if you want to remove the program. Click “Yes”. 2. Please wait and then click “OK” when un-installation is completed. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 5. Run the Application After the application is installed successfully, the application icon will appear on your desktop. Double-click this icon or select from Start Programs ZTEMT ZTEMT. UI Run the application to display the user interface. The icons on the interface are used to access the function, which indicate as below: Connect Value Add SMS NetConnect NetConnect Log Phonebook Settings Help Status Bar: 1X indication Unread indication message EV-DO indication Inbox full indication Signal strength indication. The more bars there are, the stronger signals are. No R-UIM card inserted indication CDMA network unavailable R-UIM card inserted indication Connection indication Roaming indication Sleep indication 6. Connect/Disconnect Connect Click icon to set the relevant parameters. For details, please refer to 12 “Setting” for details. Click Click ZTE Corporation to enter the interface. http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide After connecting to Internet, the current network information will appear on the interface. Double-click any place in the display area to view the connection drawing. Please connect the Data Terminal and PC with USB extension cable under weak signal to obtain the optimal performance. If necessary, adjust the Data Terminal's position and the antenna's direction. Disconnect After connecting to Internet, click 7. NetConnect Log Click icon to view NetConnect Log. NetConnect Log save the previous relevant information including Start at, Duration and Transmit bytes, which will help you know the status easily. By switching among “List”, “Monthly” and “Statistic”, you could inquire the records every time, by month or by time. Note: The relevant information contained in NetConnect Log are just for user’s reference rather than the charging basis. Delete Connection Records Click button to delete the records you have selected on the interface. Clear Connection Records Click button to delete all the records. 8. SMS (If this feature is not supported by your Data Terminal, please skip over this chapter.) Click icon to enter SMS interface. Send a Message Input the text and the recipient’s number. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Input the recipient’s number or click button to select the recipient from Phonebook. Add more recipients if you like. Select priority. Click button to send a message. Click button to save the text into Draftbox. The received messages will be saved in the Data Terminal In-box. You could copy the messages from the Data Terminal In-box to PC In-box by selecting Copy or Copy All; you could also copy the messages from PC In-box to the Data Terminal In-box by selecting Copy. Take Data Terminal In-box as an example: Reply Click to reply to the sender. Click to forward this message to other recipients. Forward Save Sender’s Number Click to save the sender’s number into Phonebook. Click to delete your selected records. Click to delete all the records in the inbox.. Click to copy your selected record into PC. Click to copy all the records from the data terminal to PC. Delete Clear Copy Copy All 9. Phonebook (If this feature is not supported by your Data Terminal, please skip over this chapter.) Click to view the Phonebook. You could select to save the contacts in the PC, Normal ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide (Data Terminal), R-②IM and Emergent. Take “Save the call Log in PC” for example in the following: Add Click then input the contents and select “OK” to add a new contact. Edit Click then edit the contents and select “OK” to edit the contact information. Search for contacts Click to search for the contacts by name or number. Click to delete your selected contact. Delete Delete All Click to delete all the contacts. Send messages from the Phonebook Click to compose the text. You could send the message to multiple recipients. Copy Click to copy your selected contacts to other storage location. Click to copy all contacts to other storage location. Copy All Import the call history Click to import the Phonebook (*.txt format) in PC to the terminal. Export the call history Click to export the Phonebook (*.txt format) in the terminal to PC. 10. Settings Click to enter the settings interface. Network Connection Setting ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Set the network parameters (phone number, username, password), work mode, etc. After the setting, click “Apply” button to save the settings on the current interface. Click “Default” button and then “Apply” button to restore the settings on the current interface to factory default. Note: The default network setup parameters are as below. Different regions may have different network setup parameters, so please consult your local telecom operator. Phone: #777 User: card Password: card If your Data Terminal does not support some following functions, please neglect relevant description. Other Setting Click “Options” to switch the interface, and you could set URL and language, etc. If you want to use conference call, please select “Show 3 way call button during calling”; After the setting, click “Apply” button to save the settings on the current interface. Click “Change Password” button to set lock device. The password is required when you start the application. The setting has nothing to do with "Default" button. Click the button “Enable Pin”. PIN code is needed when the application is started. The setting has nothing to do with "Default" button. Click “Default” button and then “Apply” button to restore the settings on the current interface to factory default. Select ring tone After clicking “Ring”, you could set different ring tones for Unconditional forwarding, No answer forwarding, Busy forwarding and Call waiting. After the setting, click “Apply” button to save the settings on the current interface. Click “Default” button and then “Apply” button to restore the settings on the current interface to factory default. Supplementary Services After clicking “Service”, you could set “Busy Forwarding”, “No answer forwarding”, ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide “Unconditional forwarding”, “Call waiting”, etc. Double-click the selected option to modify the service number and forwarding number. After the setting, click “call” button to send the corresponding request to the network system. After the setting, click “Apply” button to save the settings on the current interface. Click “Default” button and then “Apply” button to restore the settings on the current interface to factory default. Update Select Manual Upgrade or Auto Upgrade for the software. 11. Help Click button to view the help file. Click “Help” button to view the relevant help file; click “Online service” to enter our company’s website. You could view the software version information under “About”. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 12. Trouble-shooting Failures Causes Solutions Error occurs during the program Please download the program on our website The setup file may be damaged. WWW.ZTEMT.COM and reinstall it. installation. Open port failed. Directly run the software before the Close the software, plug in the Data Terminal and Data Terminal is plugged in. run it again. The port is occupied by other applications, such as “Hyper terminal”, or the software is already Close relevant software and run the software again. run. R-UIM card is not inserted. Insert R-UIM card. R-UIM card is not inserted properly. No R-UIM card. Sometimes the front side and back side are confused. R-UIM card is damaged. Validate by using a CDMA terminal. Antenna is not connected to the Access Box. No signal indicated. damaged. Terminal is Replace R-UIM card. Insert the antenna into the Data Terminal. area. The antenna or RF component is Data card. Make sure it is in the CDMA network service Out of the network service area. The Please refer to User Guide. Properly insert R-UIM Replace relevant damaged parts. being connected. (It usually occurs when the Internet connection failure. Internet connection is immediately made after the call is dialed.) View signal strength indication and check if the Poor network signal. The program has antenna is properly inserted. already been installed in current system. The Reconnect. Firstly remove the original program and insert the terminal again. installation program can't auto set up. (If the Data Terminal supports auto setup function.) Autorun function in CD-ROM is disabled because of installation of anti-virus software in the system, or Windows Vista system itself disabled Autorun function in CD-ROM in Open "My Computer" to enter CD-ROM disk ordinal, and double-click Setup.exe to install manually. default. CD-ROM No CD-ROM disk ordinal in "My disappear will once automatically the program is This is normal. If you want to display CD-ROM disk ordinal, you could firstly remove the program installed successfully. and then insert the terminal again. The program is not yet installed, and Please restart your computer. Please contact your Computer". ZTE Corporation 10 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide no other previous version was installed in the system. local operator or product technical support center if CD-ROM disk ordinal doesn't appear after your computer is restarted. The driver might be unable to work and the application unable to normally is run if the terminal is pulled out and plugged in again when application is being used under Win2000 (SP4) Please download the patch from the following the operating web site and install it. The operating system needs installing http://www.microsoft.com/downloads/details.aspx Update Roll 1 patch for Win2K SP4. ?familyid=B54730CF-8850-4531-B52B-BF28B3 24C662&displaylang=en system .In this case, the device in device manager will be marked with yellow exclamation mark, and the system must be restarted to run normally. ZTE Corporation 11 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 13. FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. 14. 4RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. SAR compliance has been established in the host product(s) (laptop computers), tested at 5mm separation distance to the human body, and tested with USB slot configurations including Horizontal-UP, Horizontal-Down, Vertical-Front, Vertical-Back. This device can be used in host product(s) with substantially similar physical dimensions, construction, and electrical and RF characteristics. The highest SAR value, tested per FCC RF exposure guidelines for USB dongle, as described in this user guide, is 1.18 W/kg. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device ZTE Corporation 12 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: Q78-AC2791V2. ZTE Corporation 13 http://www.zte.com.cn
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : JaneChiu Create Date : 2012:07:24 08:44:47+08:00 Modify Date : 2012:07:24 08:45:51+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : JaneChiu Title : Microsoft Word - AC2791_UserMan.doc Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2012:07:24 08:45:51+08:00 Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:b7048205-28ee-49d9-b9c2-ee70f461eb41 Instance ID : uuid:f5986571-1277-4c4a-93de-8b21bda1b481 Page Count : 16EXIF Metadata provided by EXIF.tools