ZTE THIS IS THE FRONT COVER PAGE Advantage Air SA Catalog Rev 20140408
User Manual: ZTE AdvantageAir SA Catalog Rev 20140408
Open the PDF directly: View PDF 
.
Page Count: 101
| Download | |
| Open PDF In Browser | View PDF |
TECHNICAL DATA CATALOGUE SA.CAT.Rev.31.03.2014 2014 EDITION COMMERICAL CATALOGUE Technical & Product Data Overview The purpose of this catalogue is to aid you in making an informed decision in the selection of air conditioning components for your project. Advantage Air has a policy of continuous improvement therefore reserves the right to make changes, without notice, to any product or process in this catalogue to improve performance, design, reliability or function SA.CAT.Rev.31.03.2014 Table of Contents FLEXIBLE DUCTWORK ..................................................................................................................... 3 SIZING GUIDE ...................................................................................................................................... 3 DUROFLEX ........................................................................................................................................... 4 ALUFLEX .............................................................................................................................................. 6 ACCOUSTIC FLEX ................................................................................................................................. 8 TEST CERTIFICATES ............................................................................................................................ 10 METAL DIFFUSERS ............................................................................................................................. 18 T-Bar Register............................................................................................................................. 18 SWIRL OUTLETS ................................................................................................................................. 20 SUPPLY AIR GRILLES .......................................................................................................................... 32 TYPE DD ..................................................................................................................................... 37 TYPE SD ..................................................................................................................................... 42 PLASTIC DIFFUSERS & GRILLES ................................................................................................ 43 STREEMLINE RANGE.......................................................................................................................... 43 ADJUSTABLE BLADE DIFFUSER KITS................................................................................ 43 FIXED BLADE DIFFUSER KITS.............................................................................................. 45 EGGCRATE GRILLE KITS ....................................................................................................... 47 SSRV - STREEMLINE SECURITY RELIEF VENTS ............................................................ 48 SILHOUETTE DIFFUSERS .................................................................................................................... 49 PLASTIC CUSHION HEAD ................................................................................................................... 51 ROUND DIFFUSER.............................................................................................................................. 52 SWIVEL JET DIFFUSERS ...................................................................................................................... 54 BABY LINEAR GRILLE ......................................................................................................................... 56 LINEAR ELITE DIFFUSER ..................................................................................................................... 58 AIRLINE DIFFUSER ............................................................................................................................. 60 METAL RETURN AIR GRILLES ...................................................................................................... 61 Type-RA ............................................................................................................................................. 61 PLASTIC RETURN AIR GRILLES .................................................................................................. 64 PURTECH RETURN AIR GRILLE........................................................................................................... 64 SLIMLINE RETURN AIR GRILLE ........................................................................................................... 66 1 SA.CAT.Rev.31.03.2014 DOOR GRILLES................................................................................................................................. 68 TYPE-DG ............................................................................................................................................ 68 TYPE-DG-DR....................................................................................................................................... 70 EGG CRATE GRILLES ..................................................................................................................... 71 CUSTOM RANGE................................................................................................................................ 71 TYPE-ECP ........................................................................................................................................... 71 TYPE-ECA ........................................................................................................................................... 72 CORES ................................................................................................................................................ 73 WEATHER LOUVRES ...................................................................................................................... 75 Type – WPL........................................................................................................................................ 75 Type – WL.......................................................................................................................................... 76 ALUMINIUM DIFFUSION SUNDRY................................................................................................ 78 Transfer Grilles .................................................................................................................................. 78 INSULATION....................................................................................................................................... 79 DUCT BOARD INSULATION ................................................................................................................ 79 DUCT WRAP ...................................................................................................................................... 81 SONIC LINER ...................................................................................................................................... 81 DAMPERS ........................................................................................................................................... 83 OPPOSED BLADE DAMPER - Type – OBD .......................................................................................... 83 DAMPER HARDWARE ........................................................................................................................ 85 ACCESSORIES .................................................................................................................................. 89 ACCESS DOORS.................................................................................................................................. 89 AIRTURN RAIL.................................................................................................................................... 90 DUCTLOK FLANGING & FASTENERS ................................................................................................. 91 DVK VALVES ...................................................................................................................................... 93 PLASTIC EXHAUST .................................................................................................................. 93 METAL EXHAUST ..................................................................................................................... 94 SUNDRY ITEMS ................................................................................................................................ 97 NOTES................................................................................................................................................. 99 2 SA.CAT.Rev.31.03.2014 FLEXIBLE DUCTWORK SIZING GUIDE MAXIMUM RECOMMENDED AIR QUANTITY (LITRES PER SECOND) FLEXIBLE DUCT DIAMETER (mm) 22 l/s Ø 100 30 l/s Ø 125 44 l/s Ø 150 65 l/s Ø 175 92 l/s Ø 200 170 l/s Ø 250 275 l/s Ø 300 385 l/s Ø 350 Ø 400 503 l/s Ø 450 636 l/s 785 l/s Ø 500 950 l/s Ø 550 3 SA.CAT.Rev.31.03.2014 FLEXIBLE DUCTWORK DUROFLEX Building Code of Australia & South African standards CONSTRUCTION • Supplied in 10 metre lengths. AS 4254 & AS 1530 Part 3 DUROFLEX has passed all of the above tests and has obtained a "0003 rating". Copies of test certificates can be viewed on pages 10 to 17 Core • Core is constructed from 12 micron clear polyester film bonded to 12 micron clear polyester film with water based fire retardant glue approximately 18 grams per m 2 encapsulating helically wound spring steel wire. • The adhesives give the core a black appearance. Operating range • Between -10ºC and +80 ºC • Between -200Pa and +1000Pa internal pressure • Maximum velocity 20 m/s Insulation • Thick polyester blanket as specified by the customer to comply with the BCA. • Other insulation options available on request. DIMENSIONS Jacket • Inner surface 12 micron clear polyester film bonded to 12 micron labelled metallised polyester film with water based fire retardant glue approximately 18 grams per m 2. MODEL NO. D10 D12 D15 D17 D20 D25 D30 D35 D40 D45 D50 D55 APPLICATIONS • DUROFLEX is a less expensive alternative to aluminium duct. • Is suitable for residential and commercial refrigerated air conditioning, evaporative cooling, heating and ventilation applications. • Not recommended for return air flexible ductwork on commercial projects, or on systems with AC units larger than 6Hp (18kW). TECHNICAL DIA D mm 100 125 150 175 200 250 300 350 400 450 500 550 LENGTH mm 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 DUROFLEX has been AWTA & SABS tested and complies with the requirements of the 4 SA.CAT.Rev.31.03.2014 FLEXIBLE DUCTWORK DUROFLEX - PERFORMANCE CHARACTERISTICS 5 SA.CAT.Rev.31.03.2014 FLEXIBLE DUCTWORK ALUFLEX CONSTRUCTION AS 4254& AS 1530 Part 3 Aluflex has passed all of the above tests and has obtained a "four zero rating". Copies of test certificates can be viewed on pages 10 to 17 • Aluflex is supplied in 10 metre lengths. Core • Core is constructed from 15 micron aluminium film bonded to 15 micron aluminium film with water based fire retardant glue approximately 18 grams per m2 encapsulating helically wound spring steel wire. Operating range • Between -10ºC and +80 ºC • Between -200Pa and +1000Pa internal pressure • Maximum velocity 20 m/s Insulation • Thick polyester blanket as specified by the customer to comply with the BCA. • Other insulation options available on request. DIMENSIONS Jacket • 15 micron aluminium film bonded to 15 micron labelled aluminium film with water based fire retardant glue approximately 18 grams per m2 . APPLICATIONS • Aluflex is a high quality product and is suitable for residential and commercial refrigerated air conditioning, evaporative cooling, heating and ventilation applications. • Suitable for return air flexible ductwork on commercial applications. MODEL NO. A10 A12 A15 A17 A20 A25 A30 A35 A40 A45 A50 A55 TECHNICAL Aluflex has been AWTA & SABS tested and complies with the requirements of the Building Code of Australia & South African standards DIA D mm 100 125 150 175 200 250 300 350 400 450 500 550 LENGTH mm 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 D U R O 6 SA.CAT.Rev.31.03.2014 FLEXIBLE DUCTWORK ALUFLEX - PERFORMANCE CHARACTERISTICS 7 SA.CAT.Rev.31.03.2014 FLEXIBLE DUCTWORK ACCOUSTIC FLEX • Not recommended for return air flexible ductwork on commercial projects, or on systems with AC units larger than 6Hp (18kW). CONSTRUCTION • Accoustic Flex is supplied in 10 metre lengths. • Not a stock item and will require 10 days lead time to manufacture & supply. TECHNICAL Accoustic flex has passed all of the above tests and has obtained a "0003 rating". Copies of test certificates can be viewed on pages 10 to 17 Core • Constructed from aluminium tape on the inside and metallised polyester tape on the outside which encapsulates a spiral galvanised steel wire and is chemically bonded using self extinguishing fire retardant adhesives. • The appearance of the core is silver with perforations at regular intervals. Operating range Accoustic flex is designed to operate in the following range: • Between -10ºC and +80 ºC • Between -200Pa and +1000Pa internal pressure • Maximum velocity 20 m/s Insulation To achieve the published insertion losses the core must be insulated with the following blanket: • Thick polyester blanket as specified by the customer to comply with the BCA. • Other insulation options available on request. DIMENSIONS Sleeve • The sleeve is constructed from a silver metallised polyester tape. As an optional extra insulated duct can be supplied with reinforced sleeve. This must be specified at the time of ordering. • The sleeve must be fully taped to the spigot as the sleeve acts as the air envelope. MODEL NO. AC10 AC15 AC20 AC25 AC30 AC35 AC40 AC45 AC50 APPLICATIONS • Accoustic flex provides higher insertion losses than standard flexible duct and is ideal for reducing low frequency noise levels in air conditioning systems. 8 DIA D mm 100 150 200 250 300 350 400 450 500 LENGTH mm 10000 10000 10000 10000 10000 10000 10000 10000 10000 SA.CAT.Rev.31.03.2014 FLEXIBLE DUCTWORK ACCOUSTIC FLEX PERFORMANCE CHARACTERISTICS 9 SA.CAT.Rev.31.03.2014 FLEXIBLE DUCTWORK TEST CERTIFICATES 10 SA.CAT.Rev.31.03.2014 FLEXIBLE DUCTWORK TEST CERTIFICATES 11 SA.CAT.Rev.31.03.2014 FLEXIBLE DUCTWORK TEST CERTIFICATES 12 SA.CAT.Rev.31.03.2014 FLEXIBLE DUCTWORK TEST CERTIFICATES 13 SA.CAT.Rev.31.03.2014 FLEXIBLE DUCTWORK TEST CERTIFICATES 14 SA.CAT.Rev.31.03.2014 FLEXIBLE DUCTWORK TEST CERTIFICATES 15 SA.CAT.Rev.31.03.2014 FLEXIBLE DUCTWORK TEST CERTIFICATES 16 SA.CAT.Rev.31.03.2014 FLEXIBLE DUCTWORK TEST CERTIFICATES 17 SA.CAT.Rev.31.03.2014 METAL DIFFUSERS T-Bar Register T-BAR REGISTER MODEL: JM-602M REMOVABLE CORE SPECIFICATIONS Size: Outer frame either 595mm x 595mm metric Neck 450mm x 450mm Material: Pressed Metal - Steel - Powder Coated Colour: Standard white but for large numbers we are prepared to use other colours, but there may be a cost penalty. ADVANTAGES • Lightweight • No visible joints on face • Reduces possibility of corrosion • Easy to clean • Captive air system, no air leak to ceiling space 18 SA.CAT.Rev.31.03.2014 METAL DIFFUSERS T-Bar Register – Performance data STATIC AIRFLOW PRESSURE L/s Pa 160 207 250 349 504 590 710 450/595 4-Way ADCD Throw (m) to terminal velocity 0.5 m/s 0.25 m/s 2.3 3 3.6 5 * * * 3.2 4.2 5 * * * * 3 4 7 8 23 32 44 CORE m/s NOISE RATING NR 0.8 1 1.2 1.6 2.4 2.8 3.3 28 39 44 53 64 69 75 NOTE: * indicates throw greater than 5.5m. 19 SA.CAT.Rev.31.03.2014 SWIRL OUTLETS Preliminary remarks KRANTZ KOMPONENTEN SWIRL outlets of the RA-N3 series have 24 fixed SWIRL vanes and are available with square or circular face. They generate high-quality diffuse air flow according to the principle of turbulent mixing ventilation. They can be installed free-hanging from the ceiling, above open grid or expanded metal ceilings, or flush with either closed false ceilings or square tile ceilings. Mode of operation The RA-N3 offers a very large volume flow rate range. Using one nominal size for RA-N3 outlets within a room enables to get a uniform ceiling design. If only a small volume flow rate is required, a collar can be inserted in the outlet so as to obtain the requested air flow range; the nominal size of all ceiling-mounted RA-N3 outlets being the same, the ceiling design keeps its harmony. For perimeter and corner zones it is possible to fit the outlets (inside) with segment cover discs. These optional discs are designed to cover certain outlet segments so as to adapt the air discharge direction to the room layout. Thanks to its stable supply air distribution pattern at low sound power levels this outlet can be used for a very wide range of air volume flow rates. Inserting a collar in the outlet enables to additionally vary the flow rate range. The SWIRL outlet 1 discharges the supply air in the horizontal direction, this feature being enhanced by the special shape of the exit 1a. The high-turbulence supply air jets induce a large proportion of indoor air, which leads to the fast equalization of supply air and indoor air temperatures as well as to a rapid decrease in jet velocity. Construction design The RA-N3 is available in 2 nominal sizes: DN 355 and DN 500. The circular model is fitted on the outside with a flush contact edge for ceiling attachment (see detail Y on page 4). The outlet with square face has a 90° turn-up for installation in square tile ceilings (see detail Z on page 4). RA-N3 SWIRL outlets achieve a high level of thermal comfort and can be used for volume flow rates up to 400 l/s [1440 m3/h] at temperature differences up to –12 K when cooling and +10 K when heating for ceiling heights up to 3 m (> 3 m = +5 K). Both outlet models are made from powdercoated sheet metal and are fastened to the reducer or connection box with a central screw 5 whose head is concealed by a cap 5a having the same powder coating as the outlet. Installation options Range of application Size DN 355 DN 500 Collar Volume flow rate V l/s m3/h The following connection types with related accessories are available for connecting the outlet to the duct system. Max. temperature difference supply air–indoor air 0 56 – 175 200 – 630 2 38 – 122 135 – 440 –12 K when cooling 4 26 – 89 95 – 320 +10 K when heating (£ 3 m) 0 125 – 400 450 – 1440 2 86 – 280 310 – 1010 4 61 – 200 220 – 720 + 5 K when heating (> 3 m) Connection type A, with reducer for connection to a circular duct or a flexible duct 20 SA.CAT.Rev.31.03.2014 SWIRL OUTLETS Connection type D, with connection box for a closed ceiling Connection type F, with connection box for a square tile ceiling Connection type A The ‘A’ reducer is fitted with 3 suspension brackets staggered by 90°, for fixing to the ceiling, as well as with a screw nut for the central fastening of the outlet. The reducer can be connected to a spiral seam duct or to a flexible duct. For installation in a closed false ceiling upon completion of said ceiling, the SWIRL outlet with flush contact edge shall be inserted into the reducer through the ceiling cutout and screwed up. Connection type F This connection type is particularly suitable for square tile ceilings. The square SWIRL outlet with connection box is inserted into the ceiling from the top in place of a ceiling tile. The connection box is fixed to the load-bearing ceiling and the outlet is screwed to the connection box. Connection type D The RA-N3 outlet is connected to a circular duct via the lateral spigot of a flat connection box. This connection type is suitable for outlets to be installed above open or closed false ceilings. The connection box is fitted with 4 suspension brackets for fixing to the ceiling and a screw nut for the central fastening of the outlet. The optional volume flow damper positioned in the lateral connection spigot can be adjusted through the openings of the SWIRL outlet. As an option, this connection box can be fitted with acoustic lining. SWIRL outlets installed above an open grid ceiling. The return air is removed evenly through the whole ceiling surface and extracted by the main return air duct positioned immediately above the outlets. 21 SA.CAT.Rev.31.03.2014 SWIRL OUTLETS Sketches of installation options 22 SA.CAT.Rev.31.03.2014 SWIRL OUTLETS Dimensions of connection type A 23 SA.CAT.Rev.31.03.2014 SWIRL OUTLETS Dimensions of connection types D and F 24 SA.CAT.Rev.31.03.2014 SWIRL OUTLETS Comfort criteria and minimum air outlet centre spacing Comfort criteria The layout of the outlet will be based on compliance with the required maximum permissible indoor air velocities1). First you have to determine the maximum specific volume flow rate V. Sp max depending on the indoor air velocity u and the discharge height H as per Graph 1. The minimum outlet centre spacing tmin will then be determined according to Graph 2 on the basis of the maximum specific volume flow rate and the outlet volume flow rate. Minimum air outlet centre spacing Maximum specific volume flow rate 25 SA.CAT.Rev.31.03.2014 SWIRL OUTLETS Layout sheet for connection type A 26 SA.CAT.Rev.31.03.2014 SWIRL OUTLETS Layout sheet for connection type D and F 27 SA.CAT.Rev.31.03.2014 SWIRL OUTLETS Sound power level and insertion loss 28 SA.CAT.Rev.31.03.2014 SWIRL OUTLETS Sound power level and total pressure loss 29 SA.CAT.Rev.31.03.2014 SWIRL OUTLETS Features Features For high-quality diffuse indoor air flow. Available with square. 1) or circular face Stable supply air jets. 2) even at minimum volume flow rate Available in 2 sizes: DN 355 and DN 500, each with . 3 volume flow rate ranges (depending on collar 0, 2, or 4) Very large volume flow rate range, which enables a uniform ceiling design due to the use of one outlet size within a room. Discharge height from 2.4 to 4.5 m . Maximum temperature difference between supply air and indoor air: –12 K when cooling, +5 K when heating (+10 K up to 3 m ceiling height) Low sound power level and pressure loss. Installation free-hanging from the ceiling, above open grid ceilings, or in closed ceilings Outlet element easy to mount and demount from the room Box for connection type F is stackable, i.e. low transport and storage volume Outlet element made from powder-coated sheet metal, connection box made from Sendzimir galvanized sheet metal Segment cover discs (optional) enable to adapt the air discharge to the room layout (3-way discharge, 2-way discharge symmetric or asymmetric); these discs can be turned any time upon outlet installation 30 SA.CAT.Rev.31.03.2014 SWIRL OUTLETS Type code and tender text Tender text ..... units optionally fitted with adjustable from room acoustic lining. SWIRL outlet for high-quality indoor air flow at minimal temperature gradients in the occupied zone, consisting of: SWIRL outlet with square face, optionally fitted with V. damper adjustable from room side. – low-height outlet element with spigot, specially shaped face, SWIRL vanes – vane underside flush with surround-ing outlet face – and central fastening screw with cap; outlet face is round or square Materials: SWIRL outlet made from sheet metal powder-coated to RAL 9010 3). – optional V. collars to increase the range of volume flow rates Reducer made from aluminium. – optional segment cover discs for 3-way discharge or 2-way symmetric or asymmetric discharge 2) Connection box made from galvanized sheet metal. Make: KRANTZ KOMPONENTEN Type: RA-N3 – __ – DN ___ / __ / __ – __ __ __ – ____ – optional aluminium reducer (connection type A) with lateral suspension brackets and screw nut for central fastening of outlet Subject to technical alteration. – optional connection box in flat design with screw nut for central fastening of outlet, with lateral suspension brackets and connection spigot, box design: outlet V. damper side and/or 1) Square face with 90° turn-up (12 mm) for square tile ceilings on enquiry 2) The segment cover discs can be turned so as to adapt the air discharge direction to the room layout 3) Other colour on enquiry SWIRL with round or square face, 31 SA.CAT.Rev.31.03.2014 SUPPLY AIR GRILLES Details SELECTION OF SUPPLY GRILLES AND REGISTERS • The performance data which follows permits quick, easy, and accurate selection of supply grilles and registers. • Two groups of data are required for selection. • Inherently required by the structural and room use considerations. • The required performance characteristics of the supply outlets. • Consider first the spaces which are to be conditioned and their effects upon outlet selections. • The air stream should spread sufficiently so that the wall or space at the end of the throw is blanketed. • The drop of the air stream should not be so great that it is within 1.5m of the floor at the end of the throw. • Finally, the allowance in the design of the system for outlet pressure loss should not be exceeded. • After the design requirements - air flow, NC level, throw spread, and drop requirements – are known, the outlet can be selected 1. m3/s The air volume to be delivered to each space is determined by overall system design, and the m3/s per outlet is determined by the number of outlets which supply each space. 2. NC Level The permissible sound level in each space may be specified by the owner or the architect, or it may be determined as an engineering design goal. Figure 1 contains an abbreviated list of design goals for air conditioning sound control in common occupancies. 3. Throw Requirement The required throw is determined from the building plan. Often the throw requirement will be the distance from the outlet to the opposite wall. Sometimes it will be the distance from the outlet to the intersection of its air system with air being delivered from another supply outlet. Selection of Grilles and Registers 19mm Louvers • The basic selection data are given in the Tables to follow for grilles and registers having louvers on a 19mm spacing. • For each listed air volume, the static pressure drop and two values of throw are given for each grille area factor. • The minimum throw is the distance the air will travel to a terminal velocity of 0.64m1s; the maximum throw is the distance of air travel to a terminal velocity of 0.41m1s. • For each m3/s and the grille size, selection data are given at three spread angles -0°, 22½° and 45°. • NC level is coded in 5 db increments for each m3/s, spread angle, and area factor in the table. • Other items to be considered are the spread requirement, permissible drop, and acceptable pressure drop. 32 SA.CAT.Rev.31.03.2014 SUPPLY AIR GRILLES Details • To obtain the static pressure loss of the register, multiply the grille static pressure by the "Ps multiplier" of the damper. • Note these two factors vary with grille width. TABLE 5 - RECOMMENDED NC LEVEL DESIGN GOALS Drop • The drop of a cooled air stream is shown in Table 7. This is the vertical distance which the air will have dropped as it travels across the room and slows to a velocity of 0.6mJs. • Note that, at a constant air flow, the drop increases as the grille area factor increases. • This occurs because the air velocity at the grille face decreases as the grille area increases. • On the other hand, it must be realized that the further the air travels - that is: the longer the throw - the greater the drop becomes. • For this reason, drop increases as air flow is increased if the grille size and spread angle are kept constant. • The spread angle setting affects all of the performance characteristics of a grille. • The following general rules can be used to estimate the spread: 1. For 0° spread angle, the total spread of the air stream is one-third of the throw. 2. For 22½° spread angle, the total spread of the air stream is about 45 percent of the throw. 3. For 45° spread angle, the total spread of the air stream is 1.5 times the throw. • These values are the total spread of the air stream, but they do not consider grille width which should be added to the spread estimated above. • The area factor shown at the top of each column is the key to actual grille-size selection. • The Grille Sizes shown are not the only grilles which could be selected. • Complete size selection is given, in Tables 6, 7 & 8 to follow, which relates grille height and grille width to the area factor. • Selecting a register requires that the effects of dampers on grille performance be considered. • Throw, spread, and drop are not affected by the dampers of a register - if the damper is wide open - but the pressure requirement and the sound level generated by a register are different from those of a grille only. • The effects of the damper on these performance characteristics are shown in Table 6 to follow. • To obtain the NC level of a register add the "NC addition" factor to the NC level of the grille as determined from Tables 6 & 9 to follow. 33 SA.CAT.Rev.31.03.2014 SUPPLY AIR GRILLES Details If three grilles serve the space, determine the difference between the combined NY level for the fIrst two grilles and the NC level of the third grille. Determine the NC addition as above, and add this to the combined NC level of the first two units. If the difference between NC levels of two grilles is 10 db or more, the sound generated by the quieter grille will not affect the space NC. TABLE 6 - NC AND STATIC PRESSURE FACTORS FOR REGISTERS (OPEN DAMPER) NOTES: (1) NC Addition plus grille NC equals register NC level. (2) Ps Multiplier times grille static pressure equals register static pressure TABLE 7 - DROP OF COOLED SUPPLY AIR • For larger spaces and specific room absorption conditions, a calculation using sound power level data is required. • Closing the damper of a register results in: • The restriction of the air flow, thereby increasing the pressure drop and decreasing the air flow. • The damper generating sound - increases the NC level. • For example a damper closed sufficiently to double the pressure loss of a register (pressure ratio of 2) causes and NC increase of about 7 db. (As a rule of thumb - and for general reference only - it can be assumed that closing an opposed blade damper to an effective opening ratio of 70 percent doubles the pressure loss of the damper outlet combination. Closing the damper to an effective opening ratio of fifty percent increases the pressure loss to 4-times the grille-open damper loss.) 34 SA.CAT.Rev.31.03.2014 SUPPLY AIR GRILLES Details Combining Sound Sources • The NC data for registers and grilles, given in tables to follow, contain an allowance for the sound adsorbing properties of the average room and its contents. • This absorption is assumed to be 8 db. • For relatively small spaces - about 73.5 sq m. or less of floor area and ceiling height of 3.0m or less – the following simplified method for estimating NC level produced by combinations of supply and return registers and grilles can be used: 1. Determine the difference in NC level between the grilles or registers having the highest NC and the second highest NC level. 2. From table 9 to follow determine the number of decibels to be added to the NC level of the grille having highest NC level. This sum is the combined NC level generated by the two grilles or registers. TABLE 8 AREA FACTORS, FOR SELECTION OF SUPPLY GRILLES - 19mm, SD AND DD 35 SA.CAT.Rev.31.03.2014 SUPPLY AIR GRILLES Details TABLE 9 - NC ADDITION FOR COMBINING EFFECTS OF SOUND SOURCES Selection of Grilles and Registers - 19mm Blade Spacing • Grilles and registers having louvers (blades) on 19mm spacing are selected in a similar manner. • The structural and room-use factors, the air volume, and the throw, spread drop and NC requirements must be considered in the same way as with other grilles and registers. • For each listed air volume, the static pressure and two values of throw are given. • The minimum throw is the distance the air will travel to a terminal velocity of 0.64m/2; the maximum throw is the distance of air travel to a terminal velocity of 0.41m/s. • Selection data are given at each of three spread angles - 0°, 22½°, and 45° - and for NC level in 5 db increments. • The area factor shown at the top of each column permits flexibility in grille-size selection 36 SA.CAT.Rev.31.03.2014 SUPPLY AIR GRILLES Details TYPE DD: Optional Accessories Note: Double deflection supply air grilles manufactured of extruded type 50S anodising grade aluminium with individually adjustable front vertical and rear horizontal louvres held in place by starlock washers and spring wire. OBD CF = = Opposed Blade Damper Concealed Fixing Frame Options 30mm Standard 20mm 50mm Finish Options NA EPC WS = Natural Anodised = Epoxy Powder Coating = Wet Spray Colour (1) Dimensions given are for opening size into which grille will fit (i.e Normal Duct Size) (2) If code "OS" is entered under SPECIAL INSTRUCTIONS, then dimensions given are over flange. 37 SA.CAT.Rev.31.03.2014 SUPPLY AIR GRILLES Performance Data DD – SD 38 SA.CAT.Rev.31.03.2014 SUPPLY AIR GRILLES Performance Data DD – SD 39 SA.CAT.Rev.31.03.2014 SUPPLY AIR GRILLES Type DD • The two sets of individually adjustable louvers - vertical and horizontal - with or without a damper attached, allow these grilles to provide maximum flexibility of adjustments for spread and throw requirements. • The multi directional flexibility allows for multi-directional air supply. • They are recommended for high sidewall, bulkhead or duct mounting and can be used for heating, cooling, or ventilating applications GENERAL SPECIFICATIONS • All models feature two sets of individually adjustable blades - vertical and horizontal - spaced at 19mm apart, and fitted into a 32.5 or 20mm frame. • The optional opposed blade damper is constructed using extruded aluminium blades and frame. • The individual blades are secured by corrosion resistant star lock washers with added adjusting tension supplied by corrosion resistant spring wire. • All models can be furnished with powder coated white finish preceded by five stage preparation process of cleaning, phosphatising and drying. • Grilles can be supplied in natural anodised and white powder coated finishes. • Other colours are available on request. 40 SA.CAT.Rev.31.03.2014 SUPPLY AIR GRILLES Type SD • These models have one set of individually adjustable blades on a horizontal plane to provide maximum throw requirements or on a vertical plane (on special request) to provide maximum spread adjustment. • They are recommended for heating, cooling, and ventilating applications, generally mounted in a high sidewall, bulkhead or duct when either spread or throw only is important. • The grilles are provided with or without an opposed blade damper. • The adjustable blades are spaced at 19mm, but fixed blades with 13, 21 and 26mm spacing can be offered at special request. GENERAL SPECIFICATIONS • All models feature one set of individually adjustable blades of extruded aluminium set in a 32.5 or 20mm extruded aluminium frame. • An optional extra opposed blade damper is constructed of extruded aluminium blades can be supplied on request. • All models can have a powder coated white surface finish preceded by five stage preparation process of cleaning, phosphatising and drying. • Other colours are available on request. • Grilles can also be supplied in natural anodised finish. 41 SA.CAT.Rev.31.03.2014 SUPPLY AIR GRILLES Details TYPE SD: Single Deflection Supply Air Grille manufactured of extruded type 50S anodising grade aluminium with individually adjustable horizontal louvers held in place by starlock washers and wire Optional Accessories OBD CF Note: = = Opposed Blade Damper Concealed Fixing Frame Options 30mm Standard 20mm 50mm Finish Options NA EPC = = Natural Anodised Epoxy Powder Coating (1) Dimensions given are for opening size into which grille will fit (i.e Normal Duct Size) (2) If code "OS" is entered under SPECIAL INSTRUCTIONS, then dimensions given are over flange 42 SA.CAT.Rev.31.03.2014 PLASTIC DIFFUSERS & GRILLES STREEMLINE RANGE ADJUSTABLE BLADE DIFFUSER KITS FEATURES • The SL54 are designed to fit in a standard commercial "T bar" ceiling grid • Louvred biscuits can be adjusted to seven optimum set points using the patented locking system. • Adjustable blade diffusers allows for airflow adjustments after installation • Each biscuit can be located to blow in any one of four directions. • Diffusers are quick and easy to install. • Louvre blades remain flush with the ceiling at all times with no ugly protrusions below the ceiling. • Aerofoil blade profile reduces air noise at the grille and improves air diffusion. • The louvre biscuits can be removed and washed. APPLICATIONS • Ideal for commercial, refrigerated air conditioning, heating and ventilation applications DIMENSIONS CONSTRUCTION • The diffuser is manufactured from white ABS plastic. • Plastic neck adaptors are manufactured from black ABS plastic. • The diffuser clips are constructed from Acetal plastic. 43 SA.CAT.Rev.31.03.2014 PLASTIC DIFFUSERS & GRILLES STREEMLINE RANGE ADJUSTABLE BLADE DIFFUSER KITS PERFORMANCE CHARACTERISTICS 44 SA.CAT.Rev.31.03.2014 PLASTIC DIFFUSERS & GRILLES STREEMLINE RANGE FIXED BLADE DIFFUSER KITS • The diffuser clips are constructed from Acetal plastic. FEATURES • The SL54 are designed to fit in a standard commercial "T bar" ceiling grid. • Louvred biscuits are moulded in one piece and the pitch of the blades is fixed. • Diffusers are quick and easy to install. • Louvre blades remain flush with the ceiling at all times with no ugly protrusions below the ceiling. • Aerofoil blade profile reduces air noise at the grille and improves air diffusion. • Each biscuit can be located to blow in any one of four directions. • The louvre biscuits can be removed and washed. • Fixed blade Streemline diffusers are less expensive than adjustable blade diffusers. APPLICATIONS • Ideal for commercial, refrigerated air conditioning, heating and ventilation applications DIMENSIONS CONSTRUCTION • The diffuser is manufactured from white ABS plastic. • Plastic neck adaptors are manufactured from black ABS plastic. 45 SA.CAT.Rev.31.03.2014 PLASTIC DIFFUSERS & GRILLES STREEMLINE FIXED BLADE DIFFUSER PERFORMANCE CHARACTERISTICS 46 SA.CAT.Rev.31.03.2014 PLASTIC DIFFUSERS & GRILLES STREEMLINE RANGE EGGCRATE GRILLE KITS APPLICATIONS FEATURES • Ideal for commercial, refrigerated air conditioning, heating and ventilation applications • The SL54 are designed to fit in a standard commercial "T bar" ceiling grid. • Eggcrate biscuits are moulded in one piece. • Grilles are quick and easy to install. • The eggcrate biscuits can be removed and washed. • Fixed blade Streemline Eggcrate grilles are less expensive than aluminium eggcrate grilles and easier to remove and clean. DIMENSIONS CONSTRUCTION • The diffuser is manufactured from white ABS plastic. • Plastic neck adaptors are manufactured from black ABS plastic. • The diffuser clips are constructed from Acetal plastic. 47 SA.CAT.Rev.31.03.2014 PLASTIC DIFFUSERS & GRILLES STREEMLINE RANGE SSRV - STREEMLINE SECURITY RELIEF VENTS FEATURES • Rectangular grille with six removable eggcrate cores and a vision proof barometric damper behind the grille. • The barometric damper will open if the pressure on the room side of the grille is greater than the pressure in the ceiling void. • Supplied with a separate metal stop to prevent the damper from blowing open. • Fitted with rubber seals to prevent noise when damper closes. DIMENSIONS CONSTRUCTION • These relief vents are constructed from white plastic and have a black, fluted, plastic barometric damper behind PERFORMANCE • Air flow through the grille will be determined by the pressure in the room and room leakage. Maximum air flow through a single grille should not exceed 390 l/s if air noise through the grille is to be avoided. APPLICATIONS • Security relief vents are designed to be installed in the ceiling of areas which are evaporative cooled. Installation of these grilles provides a relief path for the evaporative system and eliminates the need to open windows and doors. 48 SA.CAT.Rev.31.03.2014 PLASTIC DIFFUSERS & GRILLES SILHOUETTE DIFFUSERS FEATURES OPTIONAL EXTRAS • 360x360 Tee Bars are designed to drop in a standard commercial “T bar” ceiling grid. It can also be flush mounted in gyprock ceilings. • Available in 2 sizes: • 280x280 • 360x360 (Tee Bar) • Easy to clean removable cores • Alternative cores are available to suit the following blow configuration: • 280x280: 4 and 3 way blow • 360x360 (Tee Bar): 4 way blow • Aesthetically pleasing louvre design • Lightweight rigid construction • 280x280 diffusers comes with spring loaded clips for quick and easy installation • 360x360 Tee Bar accepts all standard Advantage Air 360x360 neck adaptors and plastic cushion head adaptors. • 280x280 silhouette diffuser accepts all standard Advantage Air 280x280 neck adaptors and plastic cushion head adaptors. • Plastic neck adaptors • Plastic cushion head adaptors • Sheet metal cushion head adaptors • Steel clips for Tee Bar diffusers • Sheet metal OBD dampers • Tabs on Tee Bar diffusers for installations to imperial ceiling grids. DIMENSIONS CONSTRUCTION • Constructed from blended engineering plastics APPLICATIONS • Ideal for commercial reverse cycle air conditioning, heating and ventilation applications 49 SA.CAT.Rev.31.03.2014 PLASTIC DIFFUSERS & GRILLES SILHOUETTE DIFFUSERS PERFORMANCE CHART SILHOUTTE DIFFUSERS TEEBAR (360X360) & (280X280) DIFFUSER 50 SA.CAT.Rev.31.03.2014 PLASTIC DIFFUSERS & GRILLES PLASTIC CUSHION HEAD FEATURES OPTIONAL EXTRAS • Low cost • Lightweight rigid construction • Provides even airflow across entire diffuser face • Suitable for restricted ceiling voids • Curved design allows easy ceiling installation • Internal insulation reduces risk of condensation and provides excellent acoustic properties • Integral hanging points • Can be internally insulated with a „closed cell‟ polyethylene adhesive material or a 25mm (black scrim or perforated foil) fibreglass • Manual or Motorised inlet damper DIMENSIONS CONSTRUCTION • Constructed from ABS blended engineering plastics APPLICATIONS • Suitable for use on: • Streemline diffusers • Silhouette diffusers • Spigot sizes available 200/250/300 diameter 51 SA.CAT.Rev.31.03.2014 PLASTIC DIFFUSERS & GRILLES ROUND DIFFUSER FEATURES • Available in 4 different sizes: • 150 dia • 200 dia • 250 dia • 300 dia • Stylish design • Easily adjusted diffuser opening • Low cost • Lightweight rigid construction • Easy to clean. • Scratch resistant surface. • Quiet. • Snap action clips for fast and easy installation. • Tapered neck for easy duct connection CONSTRUCTION • These outlets are injection moulded from white ABS plastic and have integrated spring loaded clips APPLICATIONS • Ideal for commercial reverse cycle air-conditioning, heating and ventilation applications. DIMENSIONS GRILLE SIZE A NOMINAL NECK SIZE (mm) B FLANGE SIZE (mm) C HEIGHT (mm) HOLE DIAMETER (mm) 150 DIA 145 268 93 231 200 DIA 200 328 100 284 250 DIA 250 390 102 356 300 DIA 300 436 102 398 52 SA.CAT.Rev.31.03.2014 PLASTIC DIFFUSERS & GRILLES ROUND DIFFUESER PERFORMANCE DATA 200 DIA SUNLINE DIFFUSER 250 DIA SUNLINE DIFFUSER 250 DIA SUNLINE DIFFUSER 53 SA.CAT.Rev.31.03.2014 PLASTIC DIFFUSERS & GRILLES SWIVEL JET DIFFUSERS FEATURES • Unique swivel core allows the occupant to adjust the direction of airflow through 360 o to suit furniture layouts etc. • Easy to clean. • Quiet. • Damper is easily adjusted from the face of the grille and will not blow closed. • Snap action clips for fast installation. • Tapered neck for easy duct connection CONSTRUCTION • These outlets are injection moulded from white A.B.S plastic and have integrated spring loaded Clips APPLICATIONS • These outlets are ideal as heating, supply air ceiling diffusers. • Can also be used for en-suite exhaust, bulkhead air conditioning / heating or as a reverse cycle jet diffuser. DIMENSIONS MODEL NO. A O/all B O/all C Neck SJ15 262 100 148 SJ20 312 103 198 54 SA.CAT.Rev.31.03.2014 PLASTIC DIFFUSERS & GRILLES SWIVEL JET DIFFUSERS - PERFORMANCE DATA 55 SA.CAT.Rev.31.03.2014 PLASTIC DIFFUSERS & GRILLES BABY LINEAR GRILLE FEATURES • One piece construction of the diffuser eliminates unsightly joins. • Attractive moulded diffuser is scratch resistant and will not corrode or deteriorate with age. • Fast, easy installation. • Significantly lower cost than aluminium diffusers. • Will fit commercial ceiling grids. • Easy to clean removable grille frame. • Light weight ridged construction. • Standard ceiling white. • Paintable. • Boots available in 200 DIA and 250 DIA connections. CONSTRUCTION • The diffuser is moulded from white ABS plastic. • The boot/adaptor black ABS plastic. • The frame can be supplied separately for bulkhead, wall and door installations. • The boot clips are constructed from Acetal plastic. APPLICATIONS • Ideal for light commercial reverse cycle air conditioning systems. • Suitable for ceiling, commercial T-Bar, bulkhead, and wall • Suggested cut out 90mm x 570mm for boots. Grille only installations will require a smaller cut-out hole for grille neck. DIMENSIONS 56 SA.CAT.Rev.31.03.2014 PLASTIC DIFFUSERS & GRILLES BABY LINEAR GRILLE PERFORMANCE 57 SA.CAT.Rev.31.03.2014 PLASTIC DIFFUSERS & GRILLES LINEAR ELITE DIFFUSER FEATURES • Two 25mm slots provide high flow rates with low noise levels. • One piece construction of the diffuser eliminates unsightly joins. • Attractive moulded diffuser is scratch resistant and will not corrode or deteriorate with age. • Fast, easy installation. • Two deflectors per slot enables 180 degree throw pattern. • Significantly lower cost than aluminium diffusers. • Will fit both metric and imperial commercial ceiling grids. CONSTRUCTION • The diffuser is constructed from white ABS plastic. • The boot, adaptor and deflectors are all constructed from black plastic. • The internal insulation for the boot is moulded polystyrene. • The boot is supplied with a side central hole for the propriety spigot. APPLICATIONS • Reverse cycle commercial air conditioning. • Heating. • Suggested cut out 118mm x 1175mm. DIMENSIONS 58 SA.CAT.Rev.31.03.2014 PLASTIC DIFFUSERS & GRILLES LINEAR ELITE DIFFUSER PERFORMANCE CHARACTERISTICS 59 SA.CAT.Rev.31.03.2014 PLASTIC DIFFUSERS & GRILLES AIRLINE DIFFUSER Features · Stylishly presented 4 slot Linear grille · One piece face construction – no visible joins · Scratch resistant, and will not corrode · Suitable for airflow of up to 220 l/s · 360 degree directable airflow · Easy installation Construction · Grille – White ABS Plastic · Boot – White ABS Plastic Applications · Commercial Reverse Cycle Air-conditioning systems Dimensions · Exact Neck Dimensions: 532mm x 196mm · Height (including spigot, but not duct): 140mm 60 SA.CAT.Rev.31.03.2014 METAL RETURN AIR GRILLES STOCK RANGE RETURN AIR FILTER AND FRAME MODEL SIZE NO. MM BRAG595/595 595*595 BRAG1195/595 1195*595 CUSTOM RANGE Type-RA • These grilles feature light weight extruded aluminium with or without damper attached. The standard grilles are available with fixed horizontal blades spaced at 21mm apart. GENERAL SPECIFICATIONS • • • • • • • Different spacing can be offered as a special request. The frame is constructed of 1.3mm thickness extruded aluminium with curved fins of extruded aluminium of1.2 to 1.6mm thickness. The damper is constructed from extruded aluminium blades and frame. Grille can be furnished with powder coated white finish preceded by a five stage preparation process of cleaning, phosphatising and drying. Other colours are available on request. Grilles can also be supplied as natural anodised. For outside weatherproof applications the Return Air Ribbed Blade (RARB) can be offered. This type is particularly suited to grilles for console air conditioners 61 SA.CAT.Rev.31.03.2014 METAL RETURN AIR GRILLES Details TYPE RA (45deg. Deflection): Return Air Grille manufactured of extruded type anodising grade aluminium with fixed curved blade profile giving low see through characteristics. This grille may be mounted vertically or horizontally. Optional Accessories OBD CF FS = Opposed Blade Damper = Concealed Fixing = Rear Fixing Straps Frame Options 30mm Standard 20mm 50mm Note: Finish Options NA EPC WS = Natural Anodised = Epoxy Powder Coating = Wet Spray Colour Blade Spacing 13mm 19mm 21mm Standard 26mm (1) Dimensions given are for over flange size (2) If 13mm, 19mm, 26mm Blade Spacing required, enter under SPECIAL INSTRUCTIONS 62 SA.CAT.Rev.31.03.2014 METAL RETURN AIR GRILLES Type-RA SELECTION DATA 63 SA.CAT.Rev.31.03.2014 PLASTIC RETURN AIR GRILLES PURTECH RETURN AIR GRILLE FEATURES APPLICATIONS • Low cost. • Scratch resistant. • Removable core for easy cleaning. • Complete with leak proof return air box. • Two return air duct connections to ensure even air distribution across grille and filter. • Electrostatic filters provides 14% more efficiency than standard filters. • Accepts standard Advantage Air neck adaptors for quick connection. • Close tolerances ensure the grille does not whistle. • Attractive elongated eggcrate core reduces pressure drop across core. • Hidden mechanical latches ensures the core will not drop. • Plastic box construction reduces risk of condensation and corrosion. • Three sizes 1200x600, 900x400 and 750x550. • 1200x600 model will drop into metric ceiling T-bar system. • Light weight ridged construction. • Standard ceiling white. • Paintable. • Ideal for small commercial ducted • Can be used without filters for air transfer and ventilation systems. OPTIONAL EXTRAS • Optional fresh air filter/connection. • Optional dirty filter alarm to alert owner when filter clean is overdue. • Optional internal insulation for high humidity climates. • Optional double layer or 3 layer filter. DIMENSIONS CONSTRUCTION • Grille, box and adaptors are all blended engineering plastics. • Electrostatic filters are a special combination of materials layered to provide the maximum static charge to capture dust particles. • Can be internally insulated using 6 mm „closed cell polyethylene adhesive material 64 SA.CAT.Rev.31.03.2014 PLASTIC RETURN AIR GRILLES PURTECH RETURN AIR GRILLE PERFORMANCE DATA 65 SA.CAT.Rev.31.03.2014 PLASTIC RETURN AIR GRILLES SLIMLINE RETURN AIR GRILLE FEATURES DIMENSIONS • Low cost • Front loading and removal of filter (optional) • Light weight rigid plastic construction • Scratch resistant • Suitable for ceiling installations • All plastic construction reduces risk of condensation and corrosion. CONSTRUCTION • Grille frame is constructed from ABS blended engineering plastics • Filter frame and media are constructed from Polypropylene plastic to provide maximum static charge to capture dust particles APPLICATIONS • Ideal for small commercial ducted gas heating and reverse cycle return air systems. • Can be used without filters for air transfer and ventilation systems OPTIONAL EXTRAS • Removable electrostatic filter • Sheet metal installation frame • Sheet metal box for ceiling return air applications. • Suitable for connection to standard Advantage Air neck adaptors for ducting. 66 SA.CAT.Rev.31.03.2014 PLASTIC RETURN AIR GRILLES SLIMLINE PERFORMANCE CHART 67 SA.CAT.Rev.31.03.2014 DOOR GRILLES TYPE-DG STOCK RANGE MODEL NOMINAL NO SIZE mm DRG300 300*300 DRG4030 400*300 DRG400 400*400 CUSTOM RANGE TYPE DG Door Grille complete with telescopic back Frame manufactured of extruded Type 50S anodising grade aluminium. These grilles have fixed horizontal Chevron Louvres. Dimensions W Fixing Options UD CF Note = = = Door Thickness Undrilled Standard Spring Clip can be supplied if door thickness W is ACCURATELY provided (Door thicknesses vary considerably Also available without frames (Picture for illustration purposes only) TYPE DG DOOR GRILLE Frame Options Standard Frame Telescopic Back Frame = 20mm = 22mm Finish Options NA BEW EPC Blade Spacing 13mm Standard 19mm 21mm 26mm Note: = Natural Anodised = Baked Enamal White = Epoxy Powder Coating (1) Dimensions given are for opening size into which grille will fit (i.e Normal Duct Size) (2) If code "OS" is entered under SPECIAL INSTRUCTIONS, then dimensions given are over flange. (3) If 19, 21, 26mm Blade Spacing required, enter under SPECIAL INSTRUCTIONS. 68 SA.CAT.Rev.31.03.2014 DOOR GRILLES TYPE-DG 69 SA.CAT.Rev.31.03.2014 DOOR GRILLES TYPE-DG-DR CUSTOM RANGE TYPE DG Door Grille without telescopic back frame manufactured of anodising grade aluminium. These grilles have fixed horizontal Chevron Louvres. For dark rooms and other areas where light sensitivity is critical, Type DG-DR is recommended. TYPE DG-DR DOOR GRILLE Note: Frame Options = 22mm Standard Finish Options NA BEB EPC = = = Natural Anodised Baked Enamel Matt White Epoxy Powder Coating Matt Black (1) Dimensions given are for opening size into which grille will fit (2) Horizontal dimension is given first. 70 SA.CAT.Rev.31.03.2014 EGG CRATE GRILLES STOCK RANGE EGG CRATE FILTER FRAME MODEL SIZE NO. MM RAG595/595 595*595 RAG1195/595 ALUMINIUM FRAMES & EGGCRATE MODEL SIZE NO. MM EC595 595*595 Eggcrate Grille EC1195 1195*595 Eggcrate Grille TF595/595 T-Frame 595*595 TF1195/595 T-Frame 1195*595 1195*595 CUSTOM RANGE TYPE-ECP TYPE EC Egg Crate Grille manufactured with frame of extruded Type 50S anodising grade aluminium and high density styrene core. Accessories Dimensions OBD CF = Opposed Blade Damper = Concealed Fixing D = ON / Normal Duct Size ON - Over Neck Size OS - Over Flange Frame Options 30mm Standard Finish Options A) Note: FRAME NA BEW CORE = Natural Anodised Aluminium = Baked Enamel White B) = High Density Polystyrene = Aluminium (1) Dimensions given are for 'OS' = Over Flange 71 SA.CAT.Rev.31.03.2014 EGG CRATE GRILLES TYPE-ECA TYPE ECA Egg Crate Grille manufactured with frame of extruded Type 50S anodising grade aluminium and the grid manufactured from 0,5mm aluminium sheet. Accessories Dimensions OBD CF = = Opposed Blade Damper Concealed Fixing D = ON / Normal Duct Size ON - Over Neck Size OS - Over Flange Frame Options 30mm Standard Finish Options NA BEW EPC = = = Natural Anodised Aluminium Baked Enamel White Epoxy Powder Coating (Picture for illustration purposes only) Note: (1) Dimensions given are for 'OS' = Over Flange 72 SA.CAT.Rev.31.03.2014 EGG CRATE GRILLES CORES SPECIAL APPLICATIONS EC & ECA CORES EC & ECA Cores are available with a 10mm channel frame for "Drop In" Ceilings. The channel frame fabricated of electro galvanised metal and painted. Mitre cuts are not accurate as it is intended for channel to be hidden by ceiling "T". Other Cores are also available on request - Honeycomb (will required extended lead time to manufacture) - 45° Angled Louvres - Chrome Finish - both Matt or Gloss 73 SA.CAT.Rev.31.03.2014 EGG CRATE GRILLES Details 74 SA.CAT.Rev.31.03.2014 WEATHER LOUVRES Type – WPL TYPE WLP Weather Louvre manufactured of extruded Type 50S anodising grade aluminium. The fixed horizontal blades are held in place by screws. Blades are spaced 35mm apart. Standard Spacing = Top Blade fits flush with frame. Lip of Bottom Blade overlap frame. Accessories = = Wire Mesh Opposed Blade Damper NOTE: Adjustment from face WM OBD of Louvre is not advisable. FS Dimensions Notes = Holes Rear Fixing Straps ON = Normal Duct Size 1) Alternative Meshes available on request. 2) For Weather Louvres smaller than 450 x 300 we recommend the use of Type RA with RARB Blade with19mm spacing. TYPE WLP: WEATHER LOUVRE Vermin Protection: - Plastic Bird mesh - Standard - Galvanised wire mesh Frame Options 50mm Standard 30mm Finish Options NA BEC EPC = = = Natural Anodised Baked Enamel Colour Epoxy Powder Coating (Picture for illustration purposes only) Note: (1) Dimensions given are for opening size into which grille will fit (2) If Code "OS" is entered under SPECIAL INSTRUCTIONS, then dimensions given are over flange. 75 SA.CAT.Rev.31.03.2014 WEATHER LOUVRES Type – WL TYPE WL Weather Louvre manufactured of extruded Type 50S anodising grade aluminium. Can be manufactured from 50 and 32.5mm frames. The fixed horizontal blades are held in place by screws. Blades are spaced 50mm apart. Standard Spacing = Top Blade fits flush with frame. Lip of Bottom Blade overlap frame. Accessories WM OBD = = Wire Mesh Opposed Blade Damper NOTE: Adjustment from face of Louvre is not advisable. FS = Rear Fixing Straps Dimensions ON = Normal Duct Size Notes 1) Alternative Meshes available on request. 2) For Weather Louvres smaller than 450 x 300 we recommend the use of Type RA with RARB Blade with19mm spacing. TYPE WL: WEATHER LOUVRE Vermin Protection: - Plastic Bird mesh - Standard - Galvanised wire mesh Finish Options Note: NA BEC EPC = = = Natural Anodised Baked Enamel Colour Epoxy Powder Coating (1) Dimensions given are for ON size (2) If Code "OS" is entered under SPECIAL INSTRUCTIONS, then dimensions given are over flange 76 SA.CAT.Rev.31.03.2014 WEATHER LOUVRES Type – WL 77 SA.CAT.Rev.31.03.2014 ALUMINIUM DIFFUSION SUNDRY Transfer Grilles MODEL NOMINAL NECK NO SIZE mm TG3030 300*300 Transfer Grille TG2020 200*200 Transfer Grille 78 SA.CAT.Rev.31.03.2014 INSULATION DUCT BOARD INSULATION TECHNICAL GENERAL DESCRIPTION Fibreglass Duct Board is a rigid high density resin bonded fibreglass board faced externally with a reinforced foil surface. The internal surface can be supplied with either a resin enriched surface or an on-line applied glass fibre tissue. The boards are used to manufacture a cost effective internal duct system incorporating excellent thermal and acoustic properties. The boards are lightweight and safe. Duct Board meets all the elements established for the requirements of a duct material set by TIMA. These include: Pressure sensitive tape Washers and screws for all securing needs Turning vanes Simple to install spigots Duct supports SIZE LABEL a) Dimensional stability, deformation and deflection. b) Containment of the air being conveyed. c) Exposure to damage, weather, temperature extremes, flexibility or other in service condition. d) Support Duct Board is extremely versatile in everyday use. It is broadly accepted and specified for use in standard, thermal and acoustical ducting requirement. Duct Board meets the requirements of internationally recognized standards making bodies such as TIMA and SMACNA. 200X1 200 -un-lined Each 2400X1 200X24-tissue-lined Each Ductboard Tape 55m G.S.S Screws 100 G.S.P. Wsh. (Pin) 100 G.S.H. Wsh (Hole) 100 G.S.H Wsh.(Sqre.) 100 Staples 5000 Angle Flange 50X50X2400 Ductboard Spigots Duct Board Tools and Accessories Shiplap grooving tools (spare blades available) Carrying case Peeler Knife Male-Female hand tools Round hole cutters Duct lay-out square Fasloop, wireloop banding tool for tie rod reinforcement Staple guns - manual or powered 79 QTY Each 102mm Each 127mm Each 152mm Each 180mm Each 203mm Each 229mm Each 254mm Each 305mm Each 356mm Each 406mm Each 457mm Each 508mm Each Staper-Manual(Loose Sup) Each Shiplap Kit-Complete Inc. 1,2,3,4,5 Tools, Construct. Man. Folding Square, Round Hole Cutter, Cutsall (M/F) Tool, PeelerKnife, Wire Loop Tool,Stapler 0 manual and carry case Each SA.CAT.Rev.31.03.2014 INSULATION Insulation Data Sheet: Description Thickness Volumetric Mass Thermal Temperature (mm) (kg/m ) Conductivity Limits Fire Rating (W/mº C) External Duct Wrap (FRK): Duct Wrap 25 25 18 0.040(@35 C) 120 C Class 1 Duct Wrap 40 40 16 0.040(@35 C) 120 C Class 1 Duct Wrap 50 50 16 0.040(@35 C) 120 C Class 1 Internal Acoustic Linings: Sonic Liner 15 15 32 0.035(@20 C) 120 C Class 1 Sonic Liner 25 24 0.0378(@20 C) 120 C Class 1 25 General Data Sheet: Description Thickness Volumetric Mass Thermal Temperature (mm) (kg/m ) Conductivity Limits Fire Rating (W/mº C) Batt and Rolls: MP 16 (Eroglite 16) 25 – 75 16 0.040(@24 C) 250 C Class 1 IM 24 (Eroglite 24) 25 – 75 24 0.0378(@24 C) 250 C Class 1 IM 475 (Eroglite 475) 25 – 75 47.5 0.033(@24 C) 450 C Class 1 IM 64 (Eroglite 64) 25 – 75 64 0.0323(@24 C) 450 C Class 1 IM 96 (Eroglite 96) 25 - 75 96 0.035 (@24 C) 250 C Class 1 Example of how to calculate the noise attenuation of internal ducting: What will the noise attenuation of a 1m duct with a section of OAO x OAO m in a frequency band of 260Hz, insulated with sonic liner be? 80 SA.CAT.Rev.31.03.2014 INSULATION Technical DUCT WRAP DUCT WRAP THERMAL INSULATION BLANKET DUCT WRAP is specifically designed as a thermal insulation blanket manufactured from highly resistant, organic glass fibre bonded with a resin. It is faced with an aluminium foil/skrim – reinforced kraft laminate providing a resistant surface finish and an excellent vapour barrier. A 120 mm overlapping flange is provided on one side for a neater appearance and adequate seal. DUCT WRAP is available in standard APPLICATIONS Duct Wrap is designed for application to rectangular and round heating, ventilation and air conditioning duct systems where the operating temperature is less than 120°C in commercial, industrial and residential buildings. BENEFITS Energy conservation, lower operating costs, ease of installation, greater CODE DISCRIPTION IDW02100 ISOVER - FRK DUCTWRAP (FRK) 10M X 1.2M X 25MM DUCTWRAP (FRK) 10M X 1.2M X 50MM SONIC LINER APPROVED ACOUSTIC BLANKET SONIC LINER is an approved flexible fibreglass blanket faced with an acoustically permeable black woven glass cloth on the air stream surface. SONIC LINER is specifically designed as an acoustical and thermal liner for sheet metal ducting and is fully approved by consulting engineers. SONIC LINER is inert, ensuring long life; it is fire safe and erosion resistant. SONIC LINER is available in 15mm, 25mm and 50mm thickness to meet your design requirements. APPLICATIONS Sonic Liner is specifically designed as an interior acoustical installation liner for sheet metal ducts in heating, ventilation and air conditioning systems operating at temperatures of up to 120°C and air velocities up to 20m/s. BENEFITS Designed and tested, sound absorption, convenience, fire safe, longer erosion resistant and environmental control. CODE DISCRIPTION ION025100 IONO50100 SONIC LINER 10M X 1.2M X 25MM SONIC LINER 10M X 1.2M X 50MM 81 SA.CAT.Rev.31.03.2014 INSULATION Technical There are a variety of products available in both fibre glass and mineral wool (rockwool) suited to any application. The products can be supplied with a combination of facing materials to meet different specifications. FIBRE GLASS Specifically designed as thermal or acoustic blankets and batts, manufactured from highly resistant, inorganic glass fibre or bonded with thermo-setting resin. They are made in board-form (type 1M) and roll-form (Type IW). The products are available in different thicknesses and densities that permit selection of a product to meet the majority of applications. I.P. INSULWOOL (ROCKWOOL) Insulwool is composed of a unique specialised mineral fibre; spun by a special process from molten rock and slag having high silica and alumina values. They are bonded into various thicknesses and densities with specifically formulated moisture resistant resins. The method of manufacture results in a highly versatile, inexpensive, all purpose thermal and acoustic insulating product. SIZE GEN. INSUL. 1200 x 600 x 25 IM24 Eneremlite 24) 1200 x 600 x 40 IM24 Eneremlite 24) 1200 x 600 x 50 IM24 Eneremlite 24) 1200 x 600 x 75 IM24 Eneremlite 24) 1200 x 600 x 100 IM24 Eneremlite 24) 8000 x 1200 x 40 IM24 Eneremlite 24) 5000 x 1200 x 50 IM24 Eneremlite 24) 3000 x 1200 x 75 IM24 Eneremlite 24) 1200 x 600 x 25 IM475 (Eneremlite 475) 1200 x 600 x 40 IM475 (Eneremlite 475) 1200 x 600 x 50 IM475 (Eneremlite 475) 10000 x 1200 x 25 IM475 (Eneremlite 475) 8000 x 1200 x 40 IM475 (Eneremlite 475) 5000 x 1200 x 50 IM475 (Eneremlite 475) 1200 x 600 x 25 (Eneremlite 64) 1200 x 600 x 40 (Eneremlite 64) 1200 x 600 x 50 (Eneremlite 64) 1200 x 600 x 25 (Eneremlite 96) 10000 x 1200 x 40 ) (Eneremlite 16) 5000 x 1200 x 50 (Eneremlite 16) 10000 x 1200 x 25 (Eneremlite 18) 5000 x 1000 x 40 Insulfelt 60 5000 x 1000 x 50 Insulfelt 60 1000 x 500 x 40 Insulboard 60 1000 x 500 x 50 Insulboard 60 1000 x 500 x 75 Insulboard 60 1000 x 500 x 100 Insulboard 60 82 SA.CAT.Rev.31.03.2014 DAMPERS OPPOSED BLADE DAMPER - Type – OBD Determine the sound level which results from the combined effects of several sound sources is not as difficult as it is confusing. • The NY data for diffusers given contains an allowance for the sound absorbing properties of the average room and its contents. • This absorption is assumed to be 8 db with sound power level referenced to 10-12 Watts. (The absorption is 18 db referenced to 10-13 Watts)? • For relatively small spaces - about 76.2m2 or less floor area and ceiling height of 3.0m or less – the following simplified method for estimating NC levels produced by a combination of supply diffusers and return registers or grilles can be used: 1. Determine the difference in NC level between the supply outlets or return intakes having the highest NC and the second highest NC level. 2. From Table 9 determine the number of decibels to be added to the NY level of the unit having the highest NC level. This sum is the combined NC level generated by the two units. 3. If three units serve the space, determine the difference between the combined NC levels of the first two units and the NC level of the third unit. Determine the NC addition as above, and add this to the combined NC level of the first two units. If the difference between NC levels of two units is 10 db or more, the sound generated by the quieter unit will not affect the space NC. EXAMPLE Two supply diffusers having an NC level of 30 and a return grille having an NC level of 35 serve a room. What is the combined NC level? SOLUTION The return has the highest NC level 35 db. The second highest is one of the diffusers at 30 db. The difference between them is 5 db. From Table 6, the NC addition for a 5 db difference is about one. Adding this to the higher NC gives a combined NC of 36.To take the second diffuser into consideration, follow the same procedure as above. The NC calculated above is 36. The NC of the diffuser is 30. The difference between them is 6. The NC addition for this difference is 1, and the combined effect of the two diffusers and the return grille is NC 37. 83 SA.CAT.Rev.31.03.2014 OPPOSED BLADE DAMPER TYPE OBD: Opposed Blade Damper manufactured from extruded aluminium Blades. Blades are held in place by spring wire and starlock push on fix. The OBD blades are linked and lever or slot operated. OBD suits all standard grilles and diffusers. BLADE OPTIONS: Standard as per sketch FINISH OPTIONS: PR MF BLADE SPACING: Note: = Primed Black (optional) = Mill Finish (standard) 25mm Standard (1) Dimensions given are for - To fit ON of mother grille (2) If OBD to fit grille, indicate type of grille, outside neck size. 84 SA.CAT.Rev.31.03.2014 DAMPER HARDWARE TECHNICAL Heavy gauge plated steel quadrants with wing Nuts for locking of damper. Frame marked to Indicate exact position of damper MODEL KS 12 Suitable for dampers up to 760mm. Set consists of: 13mm Quadrant KP 10 R Round end bearing KP 10 S Square end bearing 85 SA.CAT.Rev.31.03.2014 DAMPER HARDWARE MODEL KS 385 These heavy gauge Plat ed Steel quadr ants are designed with excellent handle action as well as quick wing nut adjustment and locking of the damper. The f rame is marked to show the exact posit ion of the damper. For use on square or round ducts. Suitable for dampers up to 500mm. Set consists of: 10mm Quadrant KP 7 Spring end bearing KP 9 S Square end bearing 86 SA.CAT.Rev.31.03.2014 DAMPER HARDWARE MODEL KL 7 ( R) ½” SHAFT LOC QUADRANT SETS - (FOR DAMPERS UP TO 30”) “Shaft Loc” Quadrants are stamped of heavy gauge steel and clearly indicate the position of the damper. The quadrant handle (available for either the ½” square or round shafts) is unique in that it locks the shaft of the damper to it by means of a powerful friction holding device strong enough to cut into the damper shaft eliminating damper rattle. The shaft is easily locked with ½” open end wrench. Available for square or round ducts. 1/2" SHAFT LOC QUADRANT SETS ITEM# MODEL SHAFT DESCRIPTION 8063 KL7 1/2" Square loc quadrant 8064 KL7R 1/2" Round loc quadrant PACKED 100 PER CARTON KL7 KL7R KL7R Section view 87 SA.CAT.Rev.31.03.2014 DAMPER HARDWARE MODEL KS 145 These heavy gauge plated steel regulators are among the most popular on the market. They minimize air leakage and reduce rattle. A wing nut locks the damper in position, yet permits quick readjustment. The dial shows the damper position at a glance. The regulator mounts easily on round or square ducts. Suitable for dampers up to 250mm. Set consists of: 6mm Regulator KP 6 Spring end bearing KP 8 S Square end bearing 88 SA.CAT.Rev.31.03.2014 ACCESSORIES ACCESS DOORS TECHNICAL Access panels The four sizes of access door provide a broad range of "accessibility options" for fire dampers, coils, filters and controls etc. The large APO and API are designed for "torso entry" whereas the AP2 and AP3 for twohanded and single handed access respectively. As the doors are deep formed they are dimensionally uniform and eliminate air leakage up to 200mm W.O. The design enables fast installation and the plated sash fasteners allow for speedy and simple access CONSTRUCTION FRAME PANEL INSULATION GASKET GASTENERS MODEL NOM. SIZE AP0 650 x 510 AP1 500 x 375 AP2 375 x 240 AP3 240 x 150 0,8mm Galvanised Steel Outer panel 0.8mm Galvanised Steel Inner panel 0.6mm Galvanised Steel 25mm Fibreglass Heat welded PVC Extrusion Sashtype Zinc Plated AxB 698 x 546 546 x 419 419 x 286 289 x 194 CxD 648 x 500 500 x 268 375 x 241 241 x 149 ADVANTAGE AIR insulated access doors shall be supplied and installed for access to all fire dampers etc. mounted within the ductwork. Doors shall be deep drawn from prime quality galvanised steel and shall incorporate a heat welded tubular P.VC. gasket mechanically fixed to eliminate air leakage up to 200mm W.G Doors shall be removable and selected to match duct sizes. The maximum size door shall be installed to provide easiest access ExF 610 x 464 464 x 327 330 x 197 206 x 116 89 SA.CAT.Rev.31.03.2014 AIRTURN RAIL TECHNICAL Air travelling throughout a duct is slowed up when it reaches a right angle turn. The "Slow-up" is detrimental to the efficiency of the duct system, therefore air turning vane assemblies are used to guide air evenly around such turns. With today's high labour costs, it is expensive for shops to produce their own air turning assemblies. That's why Airturn rail is a major contribution to sheet metal shops that require efficiency, yet inexpensive air turning vane assemblies. FAST, LOW COST ASSEMBLY With Airturn Rail, which is a pre-fabricated side rail, layout time is eliminated. Vanes can be sheared from scrap metal without tab cutting, and quickly assembled to rails with only one blow of a ball penhammer. 90 SA.CAT.Rev.31.03.2014 DUCTLOK FLANGING & FASTENERS TECHNICAL THE TOTAL DUCT FLANGE SYSTEM FLEXIBLE DUCTING CORNER PIECE The Ductlok corner piece is ribbed and edged flanged for extra rigidity and features an embossed dimple ensuring an extra tight corner joint. The bolt hole is suitable for carriage type or normal bolt corners, available in 2 sizes; Junior and Senior. DUCTLOK FLANGE A roll formed galvanized steel angle incorporating a permanent non hardening sealent, which guarantees a dependable air tight connection - eliminates the need for post installation sealing of the duct. REINFORCEMENT BEAD The unique DUCTLOK REFORCEMENT bead makes the flange stronger than conventional flanges, thereby reducing the necessity for many different gauges of flange profiles. DUCTLOK produces only 2 sizes to cover all applications. (DUCTLOK JUNIOR - 25mm x O.8mm, DUCTLOK SENIOR 35mm x l.OOmm). GASKET TAPE A Butyl rubber sealant strip for insertion between Ductlok flanges. Easily installed. The tape is water, heat and UV resistant. HANGER BOLT The Ductlok Hanger Bolt is a new concept in reducing your duct hanging costs. When fitted to the Ductlok corner piece in place of a normal or carriage bolt, a length of threaded duct hanging rod can be fitted through the hanger bolt, thus permitting the duct hanger to be fixed to the corner piece. JOINING CLAMP Ductlok Bolt-on flange clamp for clamping of duct flange joints. Assembly and installation data: 91 SA.CAT.Rev.31.03.2014 DUCTLOK FLANGING & FASTENERS TECHNICAL Assembly and installation data: (continued) CODE DUCTLOK Junior flange FLANGE - JNR (25mm) FLANGE - SNR Senior flange DLC JNR Junior Corner DLC SNR Senior Corner DLC Ductlok Clamp DUCTLOK Gasketing (5mm) Eurostick Gasket (6mm) Ductlok Hanger Bolt DUCTLOK Bar Cleat (reinforced cleat) Drive Cleat S Cleat QTY 5 metre 5 metre 100 100 100 QTY 10 metre 60 metre 10 QTY 2400 mm 2400 mm 2400 mm ADVANTAGE AIR CODE SH01 DESCRIPTION HAND STRAPPING 12MM X 1500MTR - BLACK BP01 PLASTIC BUCKLES 12MM P/1000 CANCOLLAR CANVAS COLLAR (DUCT CONNECTOR) 25MTR QUICKTIE Q-BAND 25MTR QUICKCLIP Q-CLIPS PACK OF 100 Advantage Air is able to offer, effective and economical insulation fastening systems to meet your needs. These range from pins and washers, clip pins and hand held spotters, right through to automatic rolling and bulk feed pinspotters. The PN spotter pin and washer are used with the lightweight hand held LF2000 pin spotter - the industry standard . The CP clip pins with an integral nail washer are used with the MFPT, PBFS and other automatic pinspotters. CP clip pins by Duro Dyne have "lathe cut" points to ensure uniformly precise points and easy push through. Avoid imitations and settle for the leader. 92 SA.CAT.Rev.31.03.2014 DVK VALVES TECHNICAL PLASTIC EXHAUST PLASTIC AIR VALVE WITH CONNECTION BUSH. PRODUCT PROPERTIES * Diameter range 100, 125, 150 and 200 mm * Manufactured from white polypropylene (RAL 9003) with a heat resistance up to 100 degrees Celsius * Suitable for rooms with a high air humidity (e.g. kitchen and bathroom) * Easy to remove for cleaning purposes * Air quantity can be adjusted continuously DIMENSIONS (IN MILLIMETRES) Ø100 Ø125 Ø150 Ø200 A 80 100 118 171 B 148 168 186 240 C 87 106 130 178 D 20 20 20 20 DVK 93 SA.CAT.Rev.31.03.2014 DVK VALVES TECHNICAL METAL EXHAUST METAL EXHAUST AIR VALVE WITH FIXING COLLAR. PRODUCT PROPERTIES * Diameter range 100, 125, 150 and 200 mm * Manufactured from powder coated steel * Standard colour white (RAL 9010) * Air quantity can be adjusted continuously * The combination of fixing collar with bayonet catch and sealing tape provides an optimal sealing * A fixing collar is included DIMENSIONS (IN MILLIMETRES) DVS A B C D E Ø 100 Ø 150 Ø 200 74 139 94 47 50 174 202 135 60 50 155 248 194 63 50 94 SA.CAT.Rev.31.03.2014 DVK VALVES TECHNICAL METAL EXHAUST METAL SUPPLY AIR VALVE WITH FIXING COLLAR. PRODUCT PROPERTIES * Diameter range 100, 150 and 200 mm * Manufactured from powder coated steel * Standard colour white (RAL 9010) * With adjustable, centric, rotating valve for regulation of the air quantity. * Optimal sealing is achieved by the sealing ring * A connection bush is included (DIMENSIONS (IN MILLIMETRES) DVS P A B C D E Ø 100 Ø 150 Ø 200 74 139 94 47 50 117 202 135 60 50 155 248 194 63 50 95 SA.CAT.Rev.31.03.2014 DVK VALVES STOCK RANGE ADVANTAGE AIR CODE DESCRIPTION DVS100 DISC VALVE STEEL 100MM DIA DVS125 DISC VALVE STEEL 125MM DIA DVS150 DISC VALVE STEEL 150MM DIA DVS200 DISC VALVE STEEL 200MM DIA VEF-10 DISC VALVE PLASTIC 100MM DIA VEF-12 DISC VALVE PLASTIC 125MM DIA VEF-16 DISC VALVE PLASTIC 150MM DIA VEF-20 DISC VALVE PLASTIC 200MM DIA 96 SA.CAT.Rev.31.03.2014 SUNDRY ITEMS PINS & WASHERS ADVANTAGE AIR CODE WELD PINS DESCRIPTION WELD PINS FTC12 P/5000 WELD P2 WELD PINS FTC12 P/5000 SPOTPIN PN114 SPOTTER PINS FOR 1" DUCTLINER P/1000 EC2 WASHER EC2 WASHERS P/1000 ADH SELF SELF ADHESIVE PINS & WASHERS P/500 SPOTCLIP PC1 SPOTTER CLIPS FOR PN PINS P/1000 SPOTPIN2 PN200 SPOTTER CLIPS FOR 2" DUCTLINER P/1000 SPOTPIN1-2 PN34 SPOTTER PINS FOR 1/2" DUCTLINER P/1000 CAM-LOK CAMLOK P/EA FILTER MEDIA NL100150 FILTER MEDIA 100G SOLD PER METRE ADHESIVES / SILICONE / SEALERS B611 INSULATION B611 - INSULATION ADHESIVE 20LTR M622 - DUCT SEAL M622 - DUCT SEALER 5LTR 280ML DUCT SEAL M622 DUCT SEALER CARTRIDGE 280ML (12 per box) TBE2 - BITUMEN TBE2 - BITUMEN EMULSION 20LTR B603 - POLYSTYRENE B603 - POLYSYRENE ADHESIVE 5LTR V435 ADHESIVE V435 - SUPER GRADE CONTACT ADHESIVE 25LTR M634J JAYCOSTIC M634J - JAYCOSTIC 6MM X 60M M77/4 - 280ML 280ML SILICONE GREY HM73 - GLUE STICKS HM73 - GLUE STICKS 10KG VAP-01 GEN PURPOSE VAPOUR BARRIER 5LTR P2191 TAPE DT SATF3001ADVA48 VEN1599B SC171VADVA48 PVC DUCT TAPE ALUMINIUM FOIL TAPE 48mm x 50m VENTURE TAPE GREY CLOTH TAPE 48mm x 25m SILICONE 892317010 892317011 SILICONE - CLEAR SILICONE - WHITE CONDENSER BRACKETS 223AC450P 223AC450H 223AC600P 223AC60H 450 Powder Coated bracket 450 Galvanised bracket 600 Powder Coated bracket 600 Galvanised bracket 97 SA.CAT.Rev.31.03.2014 SUNDRY ITEMS CASTELLATED COLLAR ADVANTAGE AIR CODE CC10 CC15 CC20 CC25 CC30 CC35 CC40 CC45 CC50 CC55 DESCRIPTION 100 DIA 150 DIA 200 DIA 250 DIA 300 DIA 350 DIA 400 DIA 450 DIA 500 DIA 550 DIA DUCT JOINERS DJ10 DJ15 DJ20 DJ25 DJ30 DJ35 DJ40 DJ45 DJ50 DJ55 100 DIA 150 DIA 200 DIA 250 DIA 300 DIA 350 DIA 400 DIA 450 DIA 500 DIA 550 DIA CLAMPS 100HFGS60 100HFGS92 10HFGS112 10HFGS128 10HFGS160 10HFGS188 10HFGS224 10HFGS252 10HFGS284 10HFGS316 10HFGS340 100 DIA CLAMP 150 DIA CLAMP 175 DIA CLAMP 200 DIA CLAMP 250 DIA CLAMP 300 DIA CLAMP 350 DIA CLAMP 400 DIA CLAMP 450 DIA CLAMP 500 DIA CLAMP 550 DIA CLAMP 98 SA.CAT.Rev.31.03.2014 NOTES 99 SA.CAT.Rev.31.03.2014
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 101 Language : en-US Tagged PDF : Yes Title : THIS IS THE FRONT COVER PAGE Author : adamd Creator : Microsoft® Word 2010 Create Date : 2014:06:03 15:52:27+08:00 Modify Date : 2014:06:03 15:52:27+08:00 Producer : Microsoft® Word 2010EXIF Metadata provided by EXIF.tools