ZTE MF253V ZTE 4G Wireless Router User Manual

ZTE Corporation ZTE 4G Wireless Router

Contents

User Manual

      MF253V    Let’s go  Getting started with your device
2  LEGAL INFORMATION  Copyright © 2016 ZTE CORPORATION.  All rights reserved.  No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation.  The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice.         Version No. : R1.0 Edition Time: May 5, 2016
GettiAppea   NO      PleInterfaUSBLANPhoResWPPow   On/ng to Karance OTE:  ease use the face DescB jack N ne et S button wer socket Off Know Yooriginal extecription InsertEtherStandRestoStart ConnTurn our Devernal antennat the devicernet connectdard RJ11 core factory dWi-Fi Protenector to thethe router oice      a if necessary e to USB inttions to comonnector fodefault confected Setupe external poon or off.   y. terface. mputer. or telephonefigurations.p authenticatower supplye. tion processy.  s. 3 3
4  Indica IndicatPOWERWIFI PHONESIG 2G/3G/LAN  ators tor R   E   /4G   State Blue onOff Blue onBlue blinOff Off Blue blinBlue onBlue onBlue blinOff Red Blue blinBlue soliGreen blGreen soGreen onGreen blking nking  nking nking id inking olid n inking DPwPwWtrWtrWfuTTTSSTTtoTnTnTnTnTTDescription Power is on andworking normallPower is off orworking abnormWi-Fi works ransmission. Wi-Fi works ransmission. Wi-Fi works aunction is disabThe phone is notThe phone is rinThe phone is in Signal strength iSignal strength iThere is no signaThe device is tuo the mobile neThe device isnetwork and datThe device isnetwork. The device is network and datThe device is network. The LAN port isThe LAN portd external powly. r external powmally. normally witnormally abnormally orbled. t in use.   nging.  calling. is very good or is weak. al. urned on but ntwork.  connected ta is being transs registered tconnected to a is being transregistered to s connected. t is connectedwer supply is wer supply is th no data with data r the Wi-Fi good. not registered o the LTE sferred. o the LTE the 2G/3G sferred. the 2G/3G d with data
Indicat NOThe phConnFollow Please rconnect CAPut yourdevices ttor OTE:  one functionnecting the picture refer to the ct to the InterAUTION:  r device at lto avoid elecn needs the nYour Dto connect ychapter “Acrnet or use yleast 2 metectromagneticState Off etwork suppevice your deviceccessing theyour home prs away fromc interferenceort. e.  e Internet”. phone, you m the connee. DtrTIf you wantneed insertected phone,Description ransmission. The network cabt to use the mt your (U)SI TV sets, rable is not connemobile netwIM card firsadio and oth5ected. work to st. her electronic5c
6  Configuring Your PC The following procedure describes how to configure the Internet Protocol in the Windows 7 for your Wi-Fi connection. 1.  Right-click Network and select Properties.  2.  Select Change adapter settings.  3.  Right-click Wireless Network Connection and select Properties.  4.  Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
7 5.  Select Obtain an IP address automatically and Obtain DNS server address automatically, and click OK.
8  Accessing the Internet Before accessing the Internet, please make sure that the following operations are finished.    Your device is connected via a network cable or Wi-Fi.    Your PC is configured.  To access the Internet: Log in the CPE configuration page. 1.    Launch the Internet browser and enter http://192.168.0.1 in the address bar. The login page appears.  2. Input the password and then click Login. The default password is admin. If you want to use your PC to connect to the Internet, please connect your PC to the LAN port via Ethernet cable and surf the Internet through your (U)SIM Card.   3. View the current mode on the left top of the CPE configuration page, and then click Change.  4.   Select an operation mode which you want to use and then click Apply.
 NOIf y5.  SetVoice MakiYou can1. Pick u2. Key in3. You cconne The c NO If theremake su AnswWhen also cathe calOTE:  you change tht the detail pe Functing a Caln make a call up the handsen the telephocan either preected automacall will be cOTE:  e is no signare nothing iswering athe phone ran answer thll. he operation parameters ion ll through (U)et. one number. ess the # keyatically. connected. al indications blocking it. Call rings, pick uhe call by prmode, the defor the oper)SIM card.y on the telepn, the radio s up the handseressing the Hevice will beration modephone to sensignal is unaet to answerHands-free be restarted aue. nd the call, oravailable. Chr it. If the telbutton. Pressutomatically. r wait 4~8 shange the lolephone has s the Hands- seconds for tcation of thehands-free -free button 9the call to bee device andfunction youagain to end9e d u d
10  WPS Function Your device supports WPS function. You can use this function to connect the client to your device. 1.  Power on your device, and enable the Wi-Fi function on your device. 2.   Enable the WPS function. Please check the WPS Setting on the CPE Configuration Page. 3.   Press the WPS button on your device to start Wi-Fi Protected Setup authentication process. 4.   Enable the WPS function on your client to respond to this authentication process. 5.   Follow the system prompts on your client to finish the connection. Wireless Connection (Optional) If you want to use Wi-Fi to connect your device, please refer to the following steps. 1. Make sure that the Wi-Fi works normal. Please check the Wi-Fi Setting on the CPE configuration page or check the Wi-Fi indicator.  2. Power on your device. Use the Wi-Fi application on a client to search for available wireless networks.
 NOSet the cPC. The 3. SeleOTE:   client to obtaclient gets aect the SSID  ain an IP addan IP address(wireless netdress automas, for exampltwork name)atically. For tle, 192.168.0) of your devthe detailed p0.101. vice, and then procedure, ren click Connefer to Confinect.  11figuring Your1r
12   NOYou can4.  Ent NOYou mayget the d5.  WaTroubVoice RSymptoNo dialThere islift the pThe linehook. I hear athe hooOTE:  n find the defter the passwOTE:  y need to endefault passwait until the cbleshooRelated Proboms l tone s a prompt/ phophone off the he is noisy/ distoa rapid engaged ok. fault SSID onword, and thenter the passwword.  client is connoting blems one alert/ annouhook. orted when I lifttone as soon asn the label ofen click OK.word for the nected to youuncement as sooft the phone off s I lift the phonf your device  Wi-Fi connur device sucPoon as I the ne off e. ection. You ccessfully. ossible Problem Please waturned on. If signal Lradio recepMake sure youthe PIN numbbeen entered iPUK code wh Remove ato the phonThe cable othe connectPut the phone connected to t can view thems/ Solutions ait for 1~2 minuLED light is blinption. Change thur (U)SIM cardber has been entincorrectly thenhen prompted. any electrical apne or your devicor phone set mition. on the hook anthe internet usine label on youtes after the denking, you havhe location of thd is inserted cortered. If the PINn you will need ppliance which ce. ght be faulty. Pnd try again. If yng the 2G (GSMour device toevice is e no good he device. rrectly and N number has to enter the is too close Please check you are M) network, o
13Symptoms  Possible Problems/ Solutions please disconnect this first. After dialing the last digit I hear nothing /silence.  When you have finished dialing you can press the # key or wait 4~8 seconds to connect the call.     Internet Related Problems Symptoms    Possible Problems/ Solutions I cannot access the Internet at all.     Please check your configuration settings.    Please wait 1~2 minutes for the router to initialize.      Check your service indicators. The download or upload speed is very slow.  The speed is dependent on signal strength. Check your signal strength and network type. I cannot visit the Configuration Page.     Enter the correct address. The default address is http://192.168.0.1.    Only use one network adapter in your PC.    Do not use any proxy server. I cannot establish the Wi-Fi connection between my device and the client.    Make sure the Wi-Fi function is active.    Refresh network list and select the correct SSID.    Check the IP address to make sure your client can obtain an IP address automatically in the Internet protocol (TCP/IP) properties.    Type the correct network key (Wi-Fi password) when you connect to the device.    Others Symptoms    Possible Problems/ Solutions The 3G/4G signal indicator is always blinking or does not light.   This indicates poor reception. Try moving the device to another location near the window. About the password    For the Wi-Fi connection password, please check
14  Symptoms    Possible Problems/ Solutions the label on the device.   The default password of the CPE Configuration Page is admin.   If you changed the password and forgot the new password, you need to restore the device to the factory default settings.
15Warning and Notice To the Owner •If inadequately shielded, some electronic devices may be affected by the electromagnetic interference caused by the device, such as the electronic system of vehicles. Consult the manufacturers of such devices before using the device if necessary. •Operating the device may interfere with medical instruments such as hearing aids and pacemakers. Always keep the device more than 20 centimeters away from such medical instruments when your device is turned on. Turn the device off if necessary. Consult a physician or the manufacturers of medical instruments before using the device if necessary. •Be aware of the usage limitation when using the device at places such as oil warehouses or chemical factories, where there are explosive gases or explosive products being processed. Turn off the device if necessary. •Do not use electronic transmission devices in aircrafts, at petrol stations or in hospitals. Observe and obey all warning signs, and turn off the device in these conditions. •Do not touch the inner antenna area unless it is necessary. Otherwise the performance of the device may be affected. •Keep the device out of the reach of little children. The device may cause an injury if used as a toy. •When the device is operating, do not touch the metallic parts. Failing to do so may cause burns. Using Your Device •Use original accessories or accessories that are authorized. Using any unauthorized accessories may affect the performance of the device and violate the related national regulations about telecom terminals. •Avoid using the device near or inside metallic structures or establishments that can emit electromagnetic waves, because signal reception may be affected. •The device is not waterproof. Keep the device dry and store it in a shady and cool place. •Do not use the device immediately after a sudden temperature change. In such case, dew may be generated inside and outside the device, so do not use it until it becomes dry.
16  •Handle the device carefully. Do not drop, bend or strike it. Otherwise the device may be damaged. •Only qualified personnel can dismantle and repair the device. •An operating temperature between -10°C and +45°C and humidity between 5% and 95% are recommended. Limited Warranty •This warranty does not apply to defects or errors in the product caused by: i.  Reasonable abrasion. ii.  End users’ failure to follow ZTE’s installation, operation or maintenance instructions or procedures. iii. End users’ mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or operation of the product. iv. Modifications or repairs not provided by ZTE or a ZTE-certified individual. v. Power failures, surges, fire, flood, accidents, and actions of third parties or other events outside ZTE’s reasonable control. vi. Usage of third-party products, or usage in conjunction with third-party products if such defects are due to the combined usage. vii. Any other cause beyond the range of normal usage intended for the product. End users have no right to reject or return the product, or receive a refund for the product from ZTE under the above-mentioned situations. •This warranty is end users’ sole remedy and ZTE’s sole liability for defective or nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory provisions of the law. Limitation of Liability ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, no matter whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but
17not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost. FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.  This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated withminimum distance 20cm between the radiator & your body.

Navigation menu