ZTE MF253V ZTE 4G Wireless Router User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3051314
Application ID	g7GiMDa7WAojYKc6q2VhCw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	41.39kB (517389 bits)
Date Submitted	2016-07-05 00:00:00
Date Available	2016-07-06 00:00:00
Creation Date	2016-06-30 10:22:47
Producing Software	Acrobat Distiller 10.1.0 (Windows)
Document Lastmod	2016-06-30 10:22:47
Document Title	Microsoft Word - 2-MF253V（通用_ QSG_V1.1
Document Creator	PScript5.dll Version 5.2.2
Document Author:	ls

MF253V
Let’s go
Getting started with your device
LEGAL INFORMATION
Copyright © 2016 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without the prior written
permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors
or update specifications without prior notice.
Version No. : R1.0
Edition Time: May 5, 2016
Getting to Know
Yo
our Device
Appea
arance
NO
OTE:
Pleease use the original exteernal antennaa if necessary
y.
Interfa
face Desc
cription
USB
B jack
Insertt the devicee to USB intterface.
LAN
Etherrnet connecttions to com
mputer.
Phone
Standdard RJ11 connector fo
or telephonee.
Reset
Restoore factory default
conffigurations.
WPS button
Start Wi-Fi Proteected Setup
p authenticattion processs.
Pow
wer socket
Connnector to thee external po
ower supplyy.
On/Off
Turn the router on
o or off.
Indica
ators
Indicattor
State
Blue on
Description
Power
is on andd external pow
wer supply is
working
normallly.
POWER
Off
Blue on
WIFI
Blue blinking
Off
PHONE
SIG
working
abnorm
mally.
Wi-Fi
works normally witth no data
trransmission.
Wi-Fi
works
normally
with
Wi-Fi
works aabnormally orr the Wi-Fi
fuunction is disabbled.
T phone is nott in use.
The
Blue blinnking
T phone is rinnging.
The
Blue on
T phone is in calling.
The
Blue on
Signal
strength iis very good or good.
Blue blinnking
Signal
strength iis weak.
Off
There
is no signaal.
Blue blinnking
Blue soliid
Green blinking
Green soolid
data
trransmission.
Off
Red
2G/3G//4G
Power
is off orr external pow
wer supply is
T device is tuurned on but not
The
n registered
too the mobile network.
The
device is connected to the LTE
network
and data is being transsferred.
The
device iss registered to the LTE
network.
The
device is connected to the 2G/3G
network
and data is being transsferred.
The
device is registered to the 2G/3G
network.
Green onn
T LAN port iss connected.
The
Green blinking
The
LAN portt is connected
d with data
LAN
Indicattor
State
Description
trransmission.
Off
T network cabble is not conneected.
The
NO
OTE:
The phone functionn needs the network support.
Conn
necting Your Device
Follow the picture to connect your
devicee.
to the chapter
“Acccessing thee Internet”. If you wantt to use the m
mobile netw
work to
Please refer
connectt to the Interrnet or use your
home phone,
you need insertt your (U)SIIM card firsst.
CA
AUTION:
Put yourr device at least
2 meters away from
m the conneected phone, TV sets, raadio and oth
her electronicc
devices to
t avoid elecctromagneticc interferencee.
Configuring Your PC
The following procedure describes how to configure the Internet Protocol in the Windows 7 for your
Wi-Fi connection.
1.
Right-click Network and select Properties.
2.
Select Change adapter settings.
3.
Right-click Wireless Network Connection and select Properties.
4.
Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
5.
Select Obtain an IP address automatically and Obtain DNS server address automatically, and
click OK.
Accessing the Internet
Before accessing the Internet, please make sure that the following operations are finished.

Your device is connected via a network cable or Wi-Fi.

Your PC is configured.
To access the Internet:
Log in the CPE configuration page.
1.
Launch the Internet browser and enter http://192.168.0.1 in the address bar. The login page
appears.
2. Input the password and then click Login. The default password is admin.
If you want to use your PC to connect to the Internet, please connect your PC to the LAN port via
Ethernet cable and surf the Internet through your (U)SIM Card.
3. View the current mode on the left top of the CPE configuration page, and then click Change.
4.
Select an operation mode which you want to use and then click Apply.
NO
OTE:
If you
y change thhe operation mode, the deevice will bee restarted auutomatically.
5.
Sett the detail parameters
for the operration modee.
Voice
e Function
Makiing a Calll
You cann make a call through (U))SIM card.
1. Pick up
u the handseet.
2. Key inn the telephoone number.
3. You can
c either preess the # keyy on the telepphone to sen
nd the call, orr wait 4～8 sseconds for the
t call to bee
conneected automaatically.
The call
c will be connected.
NO
OTE:
If theree is no signaal indicationn, the radio signal
is unaavailable. Chhange the location of thee device andd
make sure nothing iss blocking it.
Answ
wering a Call
When the phone rings,
pick up
u the handseet to answerr it. If the tellephone has hands-free function youu
button.
Presss the Hands--free button again to endd
also caan answer thhe call by prressing the Hands-free
the calll.
WPS Function
Your device supports WPS function. You can use this function to connect the client to your device.
1. Power on your device, and enable the Wi-Fi function on your device.
2. Enable the WPS function. Please check the WPS Setting on the CPE Configuration Page.
3. Press the WPS button on your device to start Wi-Fi Protected Setup authentication process.
4. Enable the WPS function on your client to respond to this authentication process.
5. Follow the system prompts on your client to finish the connection.
Wireless Connection (Optional)
If you want to use Wi-Fi to connect your device, please refer to the following steps.
1. Make sure that the Wi-Fi works normal. Please check the Wi-Fi Setting on the CPE configuration
page or check the Wi-Fi indicator.
2. Power on your device. Use the Wi-Fi application on a client to search for available wireless networks.
10
NO
OTE:
Set the client
to obtaain an IP adddress automaatically. For the
t detailed procedure,
reefer to Confi
figuring Yourr
PC. The client gets an
a IP addresss, for examplle, 192.168.0
0.101.
3. Seleect the SSID (wireless nettwork name)) of your devvice, and thenn click Conn
nect.
11
NO
OTE:
You cann find the deffault SSID onn the label off your devicee.
4.
Entter the passw
word, and theen click OK.
NO
OTE:
You mayy need to ennter the passw
word for the Wi-Fi connection. You can view thee label on yo
our device too
get the default
passw
word.
5.
Waait until the client
is connnected to youur device succcessfully.
Troub
bleshoo
oting
Voice Related
Prob
blems
Symptooms
Po
ossible Problem
ms/ Solutions
No diall tone

Please waait for 1~2 minuutes after the deevice is
turned on.

light is blinnking, you have no good
If signal LED
radio recepption. Change thhe location of th
he device.
There iss a prompt/ phoone alert/ annouuncement as sooon as I
Make sure youur (U)SIM cardd is inserted corrrectly and
lift the phone
off the hook.
the PIN numbber has been enttered. If the PIN
N number has
been entered incorrectly
thenn you will need to enter the
PUK code whhen prompted.
The linee is noisy/ distoorted when I lift
ft the phone off the

hook.
Remove any
a electrical apppliance which is too close
to the phonne or your devicce.

The cable or
o phone set might be faulty. Please
check
the connecttion.
I hear a rapid engaged tone as soon ass I lift the phonne off
Put the phone on the hook annd try again. If you
y are
the hoook.
connected to the
t internet usinng the 2G (GSM
M) network,
12
Symptoms
Possible Problems/ Solutions
please disconnect this first.
After dialing the last digit I hear nothing /silence.
When you have finished dialing you can press the # key
or wait 4~8 seconds to connect the call.
Internet Related Problems
Symptoms
Possible Problems/ Solutions
I cannot access the Internet at all.

Please check your configuration settings.

Please wait 1~2 minutes for the router to initialize.

Check your service indicators.
The download or upload speed is very slow.
The speed is dependent on signal strength. Check your
signal strength and network type.
I cannot visit the Configuration Page.

Enter the correct address. The default address is
http://192.168.0.1.

Only use one network adapter in your PC.

Do not use any proxy server.
I cannot establish the Wi-Fi connection between my device

Make sure the Wi-Fi function is active.
and the client.

Refresh network list and select the correct SSID.

Check the IP address to make sure your client can
obtain an IP address automatically in the Internet
protocol (TCP/IP) properties.

Type the correct network key (Wi-Fi password)
when you connect to the device.
Others
Symptoms
Possible Problems/ Solutions
The 3G/4G signal indicator is always blinking or does not

light.
About the password
This indicates poor reception. Try moving the
device to another location near the window.

For the Wi-Fi connection password, please check
13
Symptoms
Possible Problems/ Solutions
the label on the device.

The default password of the CPE Configuration
Page is admin.

If you changed the password and forgot the new
password, you need to restore the device to the
factory default settings.
14
Warning and Notice
To the Owner
•If inadequately shielded, some electronic devices may be affected by the electromagnetic interference
caused by the device, such as the electronic system of vehicles. Consult the manufacturers of such
devices before using the device if necessary.
•Operating the device may interfere with medical instruments such as hearing aids and pacemakers.
Always keep the device more than 20 centimeters away from such medical instruments when your
device is turned on. Turn the device off if necessary. Consult a physician or the manufacturers of
medical instruments before using the device if necessary.
•Be aware of the usage limitation when using the device at places such as oil warehouses or chemical
factories, where there are explosive gases or explosive products being processed. Turn off the device if
necessary.
•Do not use electronic transmission devices in aircrafts, at petrol stations or in hospitals. Observe and
obey all warning signs, and turn off the device in these conditions.
•Do not touch the inner antenna area unless it is necessary. Otherwise the performance of the device may
be affected.
•Keep the device out of the reach of little children. The device may cause an injury if used as a toy.
•When the device is operating, do not touch the metallic parts. Failing to do so may cause burns.
Using Your Device
•Use
original accessories or accessories that are authorized. Using any unauthorized accessories may
affect the performance of the device and violate the related national regulations about telecom terminals.
•Avoid using the device near or inside metallic structures or establishments that can emit electromagnetic
waves, because signal reception may be affected.
•The device is not waterproof. Keep the device dry and store it in a shady and cool place.
•Do not use the device immediately after a sudden temperature change. In such case, dew may be
generated inside and outside the device, so do not use it until it becomes dry.
15
•Handle the device carefully. Do not drop, bend or strike it. Otherwise the device may be damaged.
•Only qualified personnel can dismantle and repair the device.
•An operating temperature between -10°C and +45°C and humidity between 5% and 95% are
recommended.
Limited Warranty
•This
i.
warranty does not apply to defects or errors in the product caused by:
Reasonable abrasion.
ii.
End users’ failure to follow ZTE’s installation, operation or maintenance instructions or
procedures.
iii. End users’ mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing
or operation of the product.
iv. Modifications or repairs not provided by ZTE or a ZTE-certified individual.
v. Power failures, surges, fire, flood, accidents, and actions of third parties or other events outside ZTE’s
reasonable control.
vi. Usage of third-party products, or usage in conjunction with third-party products if such defects are
due to the combined usage.
vii. Any other cause beyond the range of normal usage intended for the product.
End users have no right to reject or return the product, or receive a refund for the product from ZTE
under the above-mentioned situations.
•This warranty is end users’ sole remedy and ZTE’s sole liability for defective or nonconforming items,
and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the
implied warranties of merchantability and fitness for a particular purpose, unless otherwise required
under the mandatory provisions of the law.
Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages
resulting from or arising out of or in connection with using of this product, no matter whether or not
ZTE had been advised, knew or should have known of the possibility of such damages, including, but
16
not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product,
or any downtime cost.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Any Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated withminimum distan
ce 20cm between the radiator & your body.
17

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : ls
Create Date                     : 2016:06:30 10:22:47+08:00
Modify Date                     : 2016:06:30 10:22:47+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - 2-MF253V（通用_ QSG_V1.1
Creator                         : ls
Producer                        : Acrobat Distiller 10.1.0 (Windows)
Document ID                     : uuid:4894d39a-f5eb-4089-bbe1-8ff6a6e0ea97
Instance ID                     : uuid:9c6cce16-f117-49f4-b149-981a82329775
Page Count                      : 17

EXIF Metadata provided by EXIF.tools