ZTE MF700 HSPA+ TV Modem User Manual MF656

ZTE Corporation HSPA+ TV Modem MF656

Manual

MF700 HSPA+ TV Modem User Guide
Introduction The product is a multi-mode 3G modem that works on GSM/GPRS/EDGE/ UMTS/HSPA networks. With a USB interface connecting to your laptop or desktop computer, it supports data and SMS services through the mobile USB Modem network as well as mobile TV, helping you realize mobile communication and entertainment anytime and anywhere. Specification The following table shows the specification of your device. Interface Type USB 2.0 HIGH SPEED Systems supported Supports most types of laptop and desktop PC Operating systems supported Windows XP (SP2 or later), Vista, Windows 7; MAC 10.4.11 or later; Fedora 12 or later, Ubuntu 9.10 or later Functions SMS service, data service, applications management, TV, microSD card, etc. Transmission speed (Max) 5.76 Mbps UL 14.4 Mbps DL Temperature Storage: -40 ℃ ~ +80 ℃ Operation:-10 ℃ ~ +60 ℃
microSD capability Support up to 32 GB microSD card Notes: microSD is a trademark of SD Card Association. Hardware Installation Installing the SIM/USIM Card 1. Remove the back cover on the modem. 2. Hold your SIM/USIM card with the cut corner oriented as shown and then slide it into the card holder with the metal contacts facing the modem. 3. Replace the back cover. Installing the Memory Card Only microSD card is supported by the modem and do not insert other memory cards into the modem. Insert the microSD card, orientated as shown, into the holder until you hear a click.
Connecting the USB Modem to Your Computer Remove the modem cap and plug the modem firmly into a USB port on your computer. Software Installation On different operating systems, the software installation procedures may be different. Please follow the general guide below and the system prompts during installation. • For Windows XP, Vista and Windows 7 When you connect the modem to your PC correctly, the system automatically recognizes it as a CD-ROM and starts the software installation wizard. If the system does not launch the installation wizard automatically, please start it by running the executable file in the new CD-ROM directory. • For Mac OS The system will automatically display a new CD-ROM icon on the desktop, when you connect the modem to your Mac correctly. Double click the installation software package in the CD-ROM, and follow the system prompts to complete the software installation. • For Linux
The system will automatically display a CD-ROM on the desktop, when you connect the modem to your computer correctly. Copy and decompress the installation package from the CD-ROM to another directory. Root users can double-click the install.sh file and select Run in Terminal to start the installation. Non-root users can start Terminal and gain the root user privilege, then run the install.sh file in the Terminal. Safe Removal from Your System Please close the application software, and then you can pull out the USB Modem safely. Functions Click the following buttons to access each function. Windows Mac Linux Function Connect to the Internet. Send and receive text messages. Manage contacts information. Configure the USB modem settings. Show connection information. Watch mobile TV programs. LED Lights Indication Modem Status Red Power on, but not registered to a network
Indication Modem Status Blue solid Registered to a network Blue blinking Active data transfer on the network Warning and notice To the owner • Some electronic devices are susceptible to electromagnetic interference sent by modem if inadequately shielded, such as the electronic system of vehicles. Please consult the manufacturer of the device before using the modem if necessary. • Operating of laptop and desktop PCs and the modem may interfere with medical devices like hearing aids and pacemakers. Please always keep them more than 20 centimeters away from such medical devices when they are turned on. Turn the modem off if necessary. Consult a physician or the manufacturer of the medical device before using the modem. • Be aware of the usage limitation when using a modem at places such as oil warehouses or chemical factories, where there are explosive gases or explosive products being processed. Turn off your modem if required. • The use of electronic transmitting devices is forbidden in aircrafts, at petrol stations and in hospitals. Please observe and obey all warning signs and switch off your modem in these conditions. • Do not touch the inner antenna area if not necessary. Otherwise it will affect your modem’s performance. • Store the modem out of the reach of little children. The modem may cause injury if used as a toy.
Using your USB Modem • Please use original accessories or accessories that are authorized. Using any unauthorized accessories may affect your modem’s performance, and violate related national regulations about telecom terminals. • Avoid using the modem near or inside metallic structures or establishments that can emit electromagnetic waves. Otherwise it may influence signal reception. • The modem is not waterproof. Please keep it dry and store in a shady and cool place. • Do not use the modem immediately after a sudden temperature change. In such case, it will produce dew inside and outside the modem, so don’t use it until it becomes dry. • Handle the modem carefully. Do not drop, bend or strike it. Otherwise the modem will be damaged. • No dismantling by non-professionals and only qualified technicians can undertake repair work. • Operating temperature range of -10℃ ~ +60℃ and humidity range of 5% ~ 95% are recommended. Limited Warranty • This warranty does not apply to defects or errors in the Product caused by: i. Reasonable abrasion. ii. End User’s failure to follow ZTE’s installation, operation or maintenance instructions or procedures. iii. End User’s mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or operation of the Product. iv. Modifications or repairs not made by ZTE or a ZTE-certified individual. v. Power failures, surges, fire, flood, accidents, actions of third parties or other events outside ZTE’s reasonable control.
vi. Usage of third-party products, or usage in conjunction with third-party products provided that such defects are due to the combined usage. vii. Any other cause beyond the range of normal usage intended for the Product. End User shall have no right to reject or return the Product, or receive a refund for the Product from ZTE under the above-mentioned situations. • This warranty is End User’s sole remedy and ZTE’s sole liability for defective or nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory provisions of the law. FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Caution: Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help. Health and safety information Radio Frequency (RF) Energy This model USB Modem meets the government’s requirements for exposure to radio waves. This USB Modem is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government: The exposure standard for wireless mobile USB Modems employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the USB Modem transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the USB Modem while operating can be well below the maximum value. This is because the USB Modem is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The highest SAR value for the model USB Modem as reported to the FCC when tested for use at the body worn is 1.17 W/kg (Body-worn measurements differ among USB Modem models, depending upon available enhancements and FCC requirements.) While there may be differences between the SAR levels of various USB Modems and at various positions, they all meet the government requirement.
The FCC has granted an Equipment Authorization for this model USB Modem with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model USB Modem is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: Q78-MF700 For body worn operation, this USB Modem has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 0.5 cm from the body. Use of other enhancements may not ensure compliance with FCC RF exposure guidelines. If you do no t use a body-worn accessory and are not holding the USB Modem at the ear, position the handset a minimum of 0.5 cm from your body when the USB Modem is switched on. Limitation of Liability ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost.
Getting More Help You can get more help on how to use the device through the following ways. • Clicking the Help button ( in Windows, in Mac, in Linux) on the software. • Sending E-mails to mobile@zte.com.cn • Visiting http://www.zte.com.cn • Calling Service Hotline: +86–755–26779999

Navigation menu