ZTE MF79S LTE/WCDMA/GSM(GPRS) Multi-Mode UFi User Manual

ZTE Corporation LTE/WCDMA/GSM(GPRS) Multi-Mode UFi Users Manual

Users Manual

1 MF79S Quick Start Guide ZTE CORPORATION ZTE Plaza, Keji Road South, Shenzhen, China
Getting tAppearancThe following fi1. Device cap 2. Front cover 3. Indicator ligh4. USB connec5. microSDHC™6. (U)SIM card NOTE: microSDHC log*If you want to the adapter sh2 to Know Youce igure is for your refer ht ctor ™ card slot slot go is a trademconnect an adapter hould be 5V/1A. Pour Device rence only. mark of SD-3C, LLC.to your device, the oower off your deviceoutput of e before
3 installing or removing the (U)SIM card. Getting to Know Your Device Indicator Light Indicator Status Description Red Error status. Not registered to the mobile network, no (U)SIM card inserted or no network service available. Green solid Registered to 2G/3G network. Green blinking Connected to 2G/3G network and data is being transferred. Blue solid Registered to LTE network. Blue blinking Connected to LTE network and data is being transferred. Blue blinking WPS is active.
Getting tConnectioThe device usallows multipleThe following fiNOTE: With other accadapter, you canywhere and 4 Blue solid Wi-FLED off Wi-Fto Know Youn Scenariosses your (U)SIM car clients to surf on thigure is for your refercessories, such as can supply power anytime. Fi is active. Fi is off. ur Device rd to access the Inthe Internet at the samrence only. mobile power or cato your device and ternet. It me time. ar power d use it
Installing1. Open the fr2. Install a (U)S WARNINGYour device door any other nodevice, do not u 5 g Your Devicront cover. SIM card to the (U)SIG! oes not support microon-standard SIM caruse those cards or ace IM card slot. o-SIM cards, nano-Srds. To avoid damagny card holders. IM cards ge to the
6 3. Install a microSDHC card to the microSDHC card slot. 4. Close the front cover.
ConnectUsing USBInsert the devicoperating systdevice and star NOTE: If the system dclick the deviceto install the soThe 4G Moautomatically, successfully. 7 ting to Your B Connector ce into your computtem automatically drts the installation wiz oes not automaticallye installation icon in Moftware. bile Hotspot confand then your PC Device ter’s USB port securdetects and identifizard. y launch installation,My Computer > ZTEfiguration page wiwill connect to yourely. The ies your you can MODEM ill open ur device
Using Wi-F1. Supply poweor using othe2. Ensure thatenabled Wi- NOTE: Refer to your details on howcomputer, youaddress autom3. Select the Connect. 4. Enter the Wi NOTE: Refer to the cPassword to g5. Wait until tsuccessfullyGetting tPassworYou can view SSID and pass8 Fi er to your device by er accessories. t your computer orFi, and search for avWi-Fi-enabled clienw to search for wirele need to set your atically. Wi-Fi name (SSID)i-Fi password if necechapter Getting to get the default Wi-Fi She client device is . to Know therd the label on the devsword. connecting to your cr other client devicvailable wireless netwnt device manual foess networks. If yocomputer to obtai) of your device, aessary, and click OK.Know the Wi-Fi SSSSID and password.connected to youe Wi-Fi SSIDvice to get the defacomputer es have works. or further ou use a n an IP and click SID and r device D and ult Wi-Fi
LoggingHotspot1. Ensure thatclient device2. Launch the http://ufi.zte3. Enter the pconfiguration NOTE: The default pas ChanginPasswor1. Log in to the2. Select Wi-Fi3. Change the 4. Click Apply. 9 in to thConfigurati the connection bee is correct. Internet browser andedevice.com in the apassword to log in n page. ssword is admin. g the Wrd e 4G Mobile Hotspot Settings > SSID.Network Name (SS. he 4G Mon Page tween your device d enter http://192.16address bar. to the 4G Mobile Wi-Fi SSIDconfiguration page.ID) or the Passwordobile and the 68.0.1 or Hotspot or d.
AccessinAfter a client dyou can accessdefault mode isMode Automatic Manual NOTE: • To modify thMobile Hotsp• The setting device is dis 10ng the Interndevice is successfulls the Internet in Autos Automatic. Operation Your device is auInternet, and yothrough the client1. Log in to configuration p2. Select curreConnection Mclick Apply.3. Click toand then clickhe parameters of yopot configuration pagof connection modesconnected from netwnet ly connected to youromatic or Manual moutomatically connecteu can surf on the t. the 4G Mobile page. ent network SettiMode > Manual, a return to the hom or .our device, log in toge. e can be changed wwork. r device, ode. The ed to the Internet Hotspot ings > and then me page, o the 4G when the
11 Configuring Your PC The following procedure describes how to configure the Internet Protocol in Windows 7 for your Wi-Fi connection. 1. Right-click Network and select Properties. 2. Select Change adapter settings. 3. Right-click Wireless Network Connection and select Properties. 4. Select Internet Protocol Version 4 (TCP/IPv4), and click Properties. 5. Select Obtain an IP address automatically and Obtain DNS server address automatically, and click OK. Warning and Notice To the Users • If inadequately shielded, some electronic devices, for example, the electronic system of vehicles, may be affected by the electromagnetic interference caused by the device. Consult the manufacturers of such devices before using the device if necessary. • Operating the device may interfere with medical instruments such as hearing aids and pacemakers. Always keep the device more than 20 centimeters away from such medical instruments when your device is powered on. Power off the device if necessary. Consult a physician or the manufacturers of medical instruments before using the device if necessary.
12 • Be aware of the usage limitation when using the device at places such as oil warehouses or chemical factories, where there are explosive gases or explosive products being processed. Power off the device if necessary. • Do not use electronic transmission devices in aircrafts, at petrol stations or in hospitals. Observe and obey all warning signs, and power off the device in these conditions. • Do not touch the inner antenna area unless necessary. Otherwise the performance of the device may be affected. • Do not use the device in an enclosed environment or where heat dissipation is poor. Prolonged work in such space may cause excessive heat and raise ambient temperature, which may lead to automatic shutdown of the device for your safety. In the case of such event, cool the device in a well-ventilated place before turning on for normal use. • Keep the device out of the reach of small children. The device may cause an injury if used as a toy. • When the device is operating, do not touch the metallic parts. Failing to do so may cause burns. • Use original accessories or accessories that are authorized. Using any unauthorized accessories may affect the performance of the device and violate the related national regulations about telecom terminals. • Avoid using the device near or inside metallic constructions or establishments that can emit electromagnetic waves, because signal reception may be affected. • The device is not waterproof. Keep the device dry and store it in a shady and cool place. • Do not use the device immediately after a sudden temperature change, because dew may be generated inside and outside the device. Do not use it until it becomes dry.
13 • Handle the device carefully. Do not drop, bend or strike it. Otherwise the device may be damaged. • Only qualified personnel can dismantle and repair the device. • An operating temperature between -10°C and +60°C and humidity between 5% and 95% are recommended. Limited Warranty This warranty does not apply to defects or errors in the product caused by: i. Reasonable abrasion. ii. End users’ failure to follow ZTE’s installation, operation or maintenance instructions or procedures. iii. End users’ mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or operation of the product. iv. Modifications or repairs not provided by ZTE or a ZTE-certified individual. v. Power failures, surges, fire, flood, accidents, and actions of third parties or other events outside ZTE’s reasonable control. vi. Usage of third-party products or usage in conjunction with third-party products if such defects are due to the combined usage. vii. Any other cause beyond the range of normal usage intended for the product. End users have no right to reject or return the product, or receive a refund for the product from ZTE under the above-mentioned situations. This warranty is end users’ sole remedy and ZTE’s sole liability for defective or nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory provisions of the law.
14 Limitation of Liability ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, no matter whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost. FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
15 -Consult the dealer or an experienced radio/TV technician for help. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Body Operation This device was tested for typical body support operations. To comply with RF exposure requirements, a minimum separation distance of 0.5 cm must be maintained between the user’s body and the device, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
16 LEGAL INFORMATION Copyright © 2016 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No.: R1.0 Edition Time: September 26, 2016
17 Troubleshooting Problem Recommended Action When you insert the device into your computer’s USB port, the operating system can not install the software automatically.  Install the software, and run the installation program in the path of My Computer/ZTEMODEM.  If the driver of your device is abnormal, reinstall the software. You need to uninstall the software first. The connection between your device and a client through Wi-Fi cannot be established.  Ensure that the Wi-Fi function is enabled.  Refresh the network list and select the correct SSID.  Check the IP address, and ensure that your client can automatically obtain an IP address.  Enter the correct network key (Wi-Fi password) when you connect the client to your device.
18 Troubleshooting Problem Recommended Action The client connected to the device cannot access the Internet.  Ensure that your (U)SIM card is available.  Change the location and find a place with good signal.  Check the settings of the WAN connection mode.  Contact with your service provider and confirm your APN settings. The 4G Mobile Hotspot configuration page cannot be visited.  Enter the correct address. The default address is http://192.168.0.1 or http://ufi.ztedevice.com.  Use only one network adapter in your PC.  Do not use any proxy server.
19 Getting More Help You can get help by:  Sending an email to mobile@zte.com.cn  Visiting www.ztedevice.com

Navigation menu