ZTE MF79S LTE/WCDMA/GSM(GPRS) Multi-Mode UFi User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3183581
Application ID	QoNQu0YVekoOa2JVoof6HA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.66kB (195788 bits)
Date Submitted	2016-11-02 00:00:00
Date Available	2016-11-04 00:00:00
Creation Date	2016-10-26 14:25:00
Producing Software	Acrobat Distiller 10.1.0 (Windows)
Document Lastmod	2016-10-26 14:25:00
Document Title	Microsoft Word - 2-MF79S quick start guide_Claro V1.0
Document Creator	PScript5.dll Version 5.2.2
Document Author:	ls

MF79S
Quick Start Guide
ZTE CORPORATION
ZTE Plaza, Keji Road South, Shenzhen, China
Getting to
t Know You
ur Device
Appearanc
ce
The following fiigure is for your referrence only.
1. Device cap
2. Front cover
3. Indicator ligh
ht
4. USB connecctor
5. microSDHC™
™ card slot
6. (U)SIM card slot
NOTE:
microSDHC log
go
is a tradem
mark of SD-3C, LLC.
*If you want to connect an adapter to your device, the output
of
hould be 5V/1A. Po
ower off your device
e before
the adapter sh
installing or removing the (U)SIM card.
Getting to Know Your Device
Indicator Light
Indicator
Status
Description
Error status. Not registered to
the mobile network, no (U)SIM
Red
card inserted or no network
service available.
Green solid
Registered to 2G/3G network.
Green
Connected to 2G/3G network
blinking
and data is being transferred.
Blue solid
Registered to LTE network.
Blue
Connected to LTE network
blinking
and data is being transferred.
Blue
WPS is active.
blinking
Blue solid
Wi-F
Fi is active.
LED off
Wi-F
Fi is off.
Getting to
t Know You
ur Device
Connection Scenarios
The device usses your (U)SIM carrd to access the Intternet. It
allows multiple clients to surf on th
he Internet at the sam
me time.
The following fiigure is for your referrence only.
NOTE:
With other acccessories, such as mobile power or ca
ar power
adapter, you can
supply power to your device and
d use it
anywhere and anytime.
Installing
g Your Devic
ce
1. Open the frront cover.
2. Install a (U)S
SIM card to the (U)SIIM card slot.
WARNING
G!
Your device do
oes not support micro
o-SIM cards, nano-SIM cards
or any other no
on-standard SIM carrds. To avoid damag
ge to the
device, do not use
u those cards or any card holders.
3. Install a microSDHC card to the microSDHC card slot.
4. Close the front cover.
Connectting to Your Device
Using USB
B Connector
Insert the devicce into your computter’s USB port securrely. The
operating systtem automatically detects
and identifiies your
device and starrts the installation wizzard.
NOTE:
If the system does not automaticallyy launch installation, you can
click the device
e installation icon in My
M Computer > ZTEMODEM
to install the so
oftware.
The
4G
Mobile
Hotspot
conffiguration
page
wiill
open
automatically, and then your PC will connect to you
ur device
successfully.
Using Wi-F
Fi
1. Supply powe
er to your device by connecting to your computer
or using othe
er accessories.
2. Ensure thatt your computer orr other client devices have
enabled Wi-Fi, and search for avvailable wireless netw
works.
NOTE:
Refer to your Wi-Fi-enabled clien
nt device manual fo
or further
details on how
w to search for wirele
ess networks.
If yo
ou use a
computer, you need to set your computer to obtain an IP
address automatically.
3. Select the Wi-Fi name (SSID)) of your device, and
click
Connect.
4. Enter the Wii-Fi password if nece
essary, and click OK.
NOTE:
Getting to Know the Wi-Fi SS
SID and
Refer to the chapter
Password to get
g the default Wi-Fi SSID
and password.
5. Wait until the client device is connected to your device
successfully.
Getting to
t Know the
e Wi-Fi SSID
D and
Passworrd
You can view the label on the devvice to get the default Wi-Fi
SSID and passsword.
Logging
in
to
th
he
4G
Mobile
Hotspot Configuration Page
1. Ensure that the connection between your device and the
e is correct.
client device
2. Launch the Internet browser and
d enter http://192.16
68.0.1 or
http://ufi.zte
edevice.com in the address
bar.
3. Enter the password
to log in to the 4G Mobile Hotspot
configuration
n page.
NOTE:
The default passsword is admin.
Changing
the
Wi-Fi
SSID
Passworrd
1. Log in to the
e 4G Mobile Hotspot configuration page.
2. Select Wi-Fi Settings > SSID.
3. Change the Network Name (SSID) or the Password
d.
4. Click Apply..
or
Accessin
ng the Intern
net
After a client device
is successfullly connected to yourr device,
you can accesss the Internet in Auto
omatic or Manual mo
ode. The
default mode iss Automatic.
Mode
Operation
Automatic
Your device is au
utomatically connecte
ed to the
Internet, and you can surf on the Internet
through the clientt.
Manual
1. Log
in
to
the
4G
Mobile
Hotspot
configuration page.
2. Select
curre
ent
network
Settiings
Connection Mode
> Manual, and
then
click Apply.
me page,
to return to the hom
3. Click
and then click
or
NOTE:
•
To modify th
he parameters of yo
our device, log in to
o the 4G
Mobile Hotsp
pot configuration pag
ge.
•
The setting of connection mode
e can be changed when
the
device is dissconnected from netw
work.
10
Configuring Your PC
The following procedure describes how to configure the Internet
Protocol in Windows 7 for your Wi-Fi connection.
1. Right-click Network and select Properties.
2. Select Change adapter settings.
3. Right-click Wireless Network Connection and select
Properties.
4. Select Internet Protocol Version 4 (TCP/IPv4), and click
Properties.
5. Select Obtain an IP address automatically and Obtain
DNS server address automatically, and click OK.
Warning and Notice
To the Users
• If inadequately shielded, some electronic devices, for example, the
•
electronic system of vehicles, may be affected by the
electromagnetic interference caused by the device. Consult the
manufacturers of such devices before using the device if
necessary.
Operating the device may interfere with medical instruments such
as hearing aids and pacemakers. Always keep the device more
than 20 centimeters away from such medical instruments when
your device is powered on. Power off the device if necessary.
Consult a physician or the manufacturers of medical instruments
before using the device if necessary.
11
•
•
•
•
•
•
•
•
•
•
Be aware of the usage limitation when using the device at places
such as oil warehouses or chemical factories, where there are
explosive gases or explosive products being processed. Power off
the device if necessary.
Do not use electronic transmission devices in aircrafts, at petrol
stations or in hospitals. Observe and obey all warning signs, and
power off the device in these conditions.
Do not touch the inner antenna area unless necessary. Otherwise
the performance of the device may be affected.
Do not use the device in an enclosed environment or where heat
dissipation is poor. Prolonged work in such space may cause
excessive heat and raise ambient temperature, which may lead to
automatic shutdown of the device for your safety. In the case of
such event, cool the device in a well-ventilated place before turning
on for normal use.
Keep the device out of the reach of small children. The device may
cause an injury if used as a toy.
When the device is operating, do not touch the metallic parts.
Failing to do so may cause burns.
Use original accessories or accessories that are authorized. Using
any unauthorized accessories may affect the performance of the
device and violate the related national regulations about telecom
terminals.
Avoid using the device near or inside metallic constructions or
establishments that can emit electromagnetic waves, because
signal reception may be affected.
The device is not waterproof. Keep the device dry and store it in a
shady and cool place.
Do not use the device immediately after a sudden temperature
change, because dew may be generated inside and outside the
device. Do not use it until it becomes dry.
12
•
•
•
Handle the device carefully. Do not drop, bend or strike it.
Otherwise the device may be damaged.
Only qualified personnel can dismantle and repair the device.
An operating temperature between -10°C and +60°C and humidity
between 5% and 95% are recommended.
Limited Warranty
This warranty does not apply to defects or errors in the product
caused by:
i. Reasonable abrasion.
ii. End users’ failure to follow ZTE’s installation, operation or
maintenance instructions or procedures.
iii. End users’ mishandling, misuse, negligence, or improper
installation, disassembly, storage, servicing or operation of the
product.
iv. Modifications or repairs not provided by ZTE or a ZTE-certified
individual.
v. Power failures, surges, fire, flood, accidents, and actions of third
parties or other events outside ZTE’s reasonable control.
vi. Usage of third-party products or usage in conjunction with
third-party products if such defects are due to the combined
usage.
vii. Any other cause beyond the range of normal usage intended for
the product.
End users have no right to reject or return the product, or receive a
refund for the product from ZTE under the above-mentioned
situations.
This warranty is end users’ sole remedy and ZTE’s sole liability for
defective or nonconforming items, and is in lieu of all other warranties,
expressed, implied or statutory, including but not limited to the implied
warranties of merchantability and fitness for a particular purpose,
unless otherwise required under the mandatory provisions of the law.
13
Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect, special,
incidental or consequential damages resulting from or arising out of or
in connection with using of this product, no matter whether or not ZTE
had been advised, knew or should have known of the possibility of
such damages, including, but not limited to lost profits, interruption of
business, cost of capital, cost of substitute facilities or product, or any
downtime cost.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
14
-Consult the dealer or an experienced radio/TV technician for help.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
Body Operation
This device was tested for typical body support operations. To comply
with RF exposure requirements, a minimum separation distance of 0.5
cm must be maintained between the user’s body and the device,
including the antenna. Third-party belt-clips, holsters, and similar
accessories used by this device should not contain any metallic
components. Body accessories that do not meet these requirements
may not comply with RF exposure requirements and should be
avoided. Use only the supplied or an approved antenna
15
LEGAL INFORMATION
Copyright © 2016 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated
or utilized in any form or by any means, electronic or mechanical,
including photocopying and microfilm, without the prior written
permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to
make modifications on print errors or update specifications without
prior notice.
Version No.: R1.0
Edition Time: September 26, 2016
16
Troubleshooting
Problem
Recommended Action
When you insert

the device into
your computer’s
USB
port,
the
Install the software, and run the
installation program in the path of
My Computer/ZTEMODEM.

If the driver of your device is
operating system
abnormal, reinstall the software.
can
You need to uninstall the software
not
the
install
software
first.
automatically.
The
connection
between

your
device
and
client
through
Wi-Fi cannot be
Ensure that the Wi-Fi function is
enabled.

Refresh the network list and
select the correct SSID.

established.
Check the IP address, and ensure
that your client can automatically
obtain an IP address.

Enter the correct network key
(Wi-Fi
password)
when
you
connect the client to your device.
17
Troubleshooting
Problem
The
Recommended Action
client

connected to
the
device

cannot access
the Internet.
Ensure that your (U)SIM card is
available.
Change the location and find a place
with good signal.

Check the settings of the WAN
connection mode.

Contact with your service provider
and confirm your APN settings.
The
4G

Mobile
Hotspot
configuration
page
Enter the correct address. The
default address is http://192.168.0.1
or http://ufi.ztedevice.com.

cannot
be visited.
Use only one network adapter in
your PC.

Do not use any proxy server.
18
Getting More Help
You can get help by:

Sending an email to mobile@zte.com.cn

Visiting www.ztedevice.com
19

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : ls
Create Date                     : 2016:10:26 14:25:00+08:00
Modify Date                     : 2016:10:26 14:25:00+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - 2-MF79S quick start guide_Claro  V1.0
Creator                         : ls
Producer                        : Acrobat Distiller 10.1.0 (Windows)
Document ID                     : uuid:cfa0779f-483f-439f-8dbc-ef1fdacae111
Instance ID                     : uuid:b01f1a1c-ffd9-4d3f-ad31-fb0c5d0490ff
Page Count                      : 19

EXIF Metadata provided by EXIF.tools