Contents
- 1. User Manual 1
- 2. User Manual 2
User Manual 2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1886776 |
| Application ID | mLwIPnGYRpd2RNoHEBb+bQ== |
| Document Description | User Manual 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | Yes |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 12.47kB (155937 bits) |
| Date Submitted | 2012-12-26 00:00:00 |
| Date Available | 2013-06-24 00:00:00 |
| Creation Date | 2017-10-28 15:44:46 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-28 15:44:46 |
| Document Title | User Manual 2 |
| Document Creator | Adobe InDesign CS6 (Windows) |
Copyright © 2012 by ZTE Corporation
Contents
All rights reserved
No part of this publication may be excerpted, reproduced,
translated, or utilized in any form or by any means, electronic
or mechanical, including photocopying and microilm, without
the prior written permission of ZTE Corporation.
ZTE Corporation operates a policy of continuous development.
ZTE Corporation reserves the right to make changes and
improvements to any of the products described in this
Mobile Hotspot
document without prior notice.
1. Health and Safety Information ........................................ 4
General Guidelines ............................................................ 4
1. Health and Safety Information
General Guidelines
•
Aircraft Safety .................................................................... 7
Hospital Safety................................................................... 7
Road Safety ....................................................................... 7
•
Vehicles Equipped with an Airbag ..................................... 8
Third Party Equipment ....................................................... 8
Eficient Use....................................................................... 8
•
FCC Compliance(FOR PART 15B/PART 15C) .................. 8
Product Safety and Warranty Information
RF Exposure Information (SAR) ........................................ 9
•
CTIA Compliance .............................................................11
User Manual
Battery Caution ............................................................... 12
2. Consumer Limited Warranty......................................... 13
•
•
Release: V1.0
•
Manual No: 07958450XXXX
•
•
Some electronic devices may be susceptible to
electromagnetic interference. Locate the device away
from TV set, radio and other electronic equipment to avoid
electromagnetic interference.
The device may interfere with medical devices like
hearing aids and pacemakers. Consult a physician or the
manufacturer of the medical device before using the device.
Do not use your device in dangerous environments such
as oil terminals or chemical factories where there are
explosive gases or explosive products being processed.
Please use original accessories or accessories that are
authorized by ZTE. Unauthorized accessories may affect
the device performance, damage the device or cause
danger to you.
Do not attempt to dismantle the device. There are no user
serviceable parts.
Do not allow the device or accessories to come into contact
with liquid or moisture at any time. Do not immerse the
device in any liquid.
Do not place objects on top of the device. This may lead to
overheating of the device.
The device must be used in ventilated environment.
Do not expose the device to direct sunlight or store it in hot
areas. High temperature can shorten the life of electronic
•
•
•
•
•
•
•
•
•
•
•
•
•
devices.
Do not allow children to play with the device.
Use an antistatic cloth to clean the device. Do not use
chemical or abrasive cleanser as these could damage the
plastic case.
Use the device within the temperature range of -10°C
~ +55°C, and the storage temperature range is -20°C ~
+65°C. The humidity range is 5%~95%.
Do not use your device during a thunderstorm.
Do not take out your (U)SIM card unnecessarily. The (U)
SIM card may be easily lost or it can be damaged by static
electricity.
Do not place the device alongside computer disks,
credit cards, travel cards or other magnetic media. The
information contained on the disks or cards may be affected
by the device.
Do not paint the device.
Do not drop, throw, or subject the device to rough
treatment.
Remember to recycle: The cardboard packing supplied with
this device is ideal for recycling.
Do not disassemble or open crush, bend or deform,
puncture or shred
Do not modify or remanufacture, attempt to insert foreign
objects into the battery, immerse or expose to water or
other liquids, expose to ire, explosion or other hazard.
Only use the battery for the system for which it is speciied
Only use the battery with a charging system that has been
qualified with the system per this standard. Use of an
unqualified battery or charger may present a risk of fire,
explosion, leakage, or other hazard.
• Do not short circuit a battery or allow metallic conductive
objects to contact battery terminals.
• Replace the battery only with another battery that has
been qualified with the system per this standard, IEEEStd-1725-2006. Use of an unqualiied battery may present
a risk of ire, explosion, leakage or other hazard.
• Promptly dispose of used batteries in accordance with local
regulations
• Battery usage by children should be supervised.
• Avoid dropping the device or battery. If the device or battery
is dropped, especially on a hard surface, and the user
suspects damage, take it to a service center for inspection.
• Improper battery use may result in a ire, explosion or other
hazard.
For those host devices that utilize a USB port as a charging
source, the host device's user manual shall include a statement
that the device shall only be connected to CTIA certified
adapters, products that bear the USB-IF logo or products that
have completed the USB-IF compliance program.
Aircraft Safety
•
Do not use your device before the airplane takes off. In
order to protect airplane’s communication system from
interference, it is never allowed to use the device when
in flight. Get aircrew’s permission if you want to use the
device prior to take-off.
including either installed or portable wireless equipment, in
the area over the airbag or in the airbag deployment area. If
in-vehicle wireless equipment is improperly installed and the
airbag inlates, serious injury could result.
Hospital Safety
Third Party Equipment
•
Road Safety
The use of third party equipment, cables or accessories, not
made or authorized by ZTE, may invalidate the warranty of the
device and also adversely affect the device’s operation.
•
Eficient Use
•
•
•
•
•
Follow the instructions given by any respective medical facility
regarding the use of Wireless devices on their premises.
You must exercise proper control of your vehicle at all
times. Give your full attention to driving.
Observe all of the recommendations contained in your local
trafic safety documentation.
Please check if local laws and/or regulations restrict the
use of wireless devices while driving.
Do not use your device at a refueling point, such as a gas
station, even if you are not refueling your own car.
Do not store or carry lammable or explosive materials in
the same compartment as the device.
Electronic systems in a vehicle, such as anti-lock brakes, speed
control and fuel injection systems are not normally affected by
radio transmissions. The manufacturer of such equipment may
advise if it is adequately shielded from radio transmissions. If
you suspect vehicle problems caused by the radio transmitter in
the device, consult your dealer and do not use the device until
your device has been checked by a qualiied technician.
For optimum performance with minimum power consumption,
do not cover the device with anything. Covering the device
may cause the device to operate at higher power levels than
needed.
FCC Compliance(FOR PART 15B/PART 15C)
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
Caution: Changes or modiications not expressly approved by
the manufacturer could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
Vehicles Equipped with an Airbag
An airbag inflates with great force. Do not place objects,
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and
receiver.
— Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
— Consult the dealer or an experienced radio/ TV technician
for help.
This device meets the government’s requirements for exposure
to radio waves.
This device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy
set by the Federal Communications Commission of the U.S.
Government.
The exposure standard for wireless devices employs a unit of
measurement known as the Speciic Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are
conducted using standard operating positions accepted by
the FCC with the device transmitting at its highest certified
power level in all tested frequency bands. Although the SAR
is determined at the highest certified power level, the actual
SAR level of the device while operating can be well below the
maximum value. This is because the device is designed to
operate at multiple power levels so as to use only the poser
required to reach the network. In general, the closer you are to
a wireless base station antenna, the lower the power output.
The device was tested according to FCC RF exposure
procedures to address hand and near-body exposure
conditions, and the highest SAR value as reported to the FCC
is 1.20 W/kg.
While there may be differences between the SAR levels of
various devices and at various positions, they all meet the
government requirement
The FCC has granted an Equipment Authorization for this
device with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. SAR information on
this device is on file with the FCC and can be found under
the Display Grant section of www.fcc.gov/oet/ea/fccid after
searching on FCC ID: Q78-MF96.
This device has been tested and meets the FCC RF exposure
guidelines.
a) Do not disassemble or open crush, bend or deform,
puncture or shred.
b) Do not modify or rem anufacture. attempt to insert foreign
objects in to the battery, immerse or expose to water or
other liquids. expose to ire, explosion or other hazard.
c) Only use the battery for the system for which it is speciied.
d) Only use the battery with a charging system that has
been qualified with the system per CTIA Certification
Requiremens for Battery System Compliance to IEEE
1725. Use of an unqualiied battery or charger may present
a risk of ire, explosion, leakage, or other hazard.
e) Do not short circuit a battery or allow metallic conductive
objects to contact battery terminals.
f) Replace the battery only with another battery that has been
qualiied with the system per this standard, IEEE-Std-1725.
Use of an unqualified battery may present a risk of fire,
explosion, leakage or other hazard.
g) Promptly dispose of used batteries in accordance with local
regulations.
h) Battery usage by children should be supervised.
j) Avoid dropping the device or battery. If the device or battery
is dropped, especially on a hard surface, and the user
suspects damage, take it to a service center for in spection,
k) Improper battery use may result in a ire, explosion or other
hazard.
For those host devices that utilize a USB port as a charging
10
11
RF Exposure Information (SAR)
CTIA Compliance
source, the host device's user manual shall include a
statement that the device shall only be connected to CTIA
certified adapters, products that bear the USB-IF logo or
products that have completed the USB-IF compliance program.
Battery Caution
•
•
•
•
•
•
•
•
Do not short-circuit the battery metal contacts, as this can
cause excessive heat and/or ire.
Do not carry a battery in a pocket or purse where it may
come into contact with metal objects such as coins or keys.
This may cause a short-circuit and result in excessive heat
and/or ire .
To avoid risk of personal injury, never dispose of battery
into a ire.
Do not disassemble or modify the battery.
Do not expose battery to high temperatures exceeding
140°F /60°C.
When not using the battery for a long period, remove it from
the device and store it in a cool and dry place.
If the battery is worn out or damaged, do not use the power
charger adapter.
Discard worn or damaged batteries at proper recycling
centers. Do not dispose of the battery in household
garbage containers.
Warning:
If the battery is broken, keep away from it. If any material leaks
from the battery and makes contact with your skin, wash your
12
skin with abundant fresh water and get medical assistance if
necessary.
2. Consumer Limited Warranty
ZTE ("Seller") offers you a limited warranty that the enclosed
product or products (the "Product") will be free from defects in
material and workmanship for a period that expires one year
from the date of sale of the Product to you, provided that you
are the original end-user purchaser of the Product and provided
that your purchase was made from a supplier authorized by
the Seller. Transfer or resale of a Product will automatically
terminate warranty coverage with respect to that Product. This
limited warranty is not transferable to any third party, including
but not limited to any subsequent purchaser or owner of the
Product. This limited warranty is applicable only to end users in
the United States.
Seller will, at its sole and absolute discretion, either repair or
replace a Product (for which Seller may use refurbished parts
of similar quality and functionality) if found by Seller to be
defective in material or workmanship, or if Seller determines
that it is unable to repair or replace such Product, Seller will
refund the purchase price for such Product, provided that
the subject Product (i) is returned to a Seller authorized
service center within the one year warranty period, and (ii) is
accompanied by a proof of purchase in the form of a bill of sale
or receipted invoice which evidences that the subject Product
is within the one year warranty period. After the one year
13
warranty period, you must pay all shipping, parts and labor
charges. In the event that the Product is deemed un-repairable
or has been removed from the list of products supported by the
Seller, you will only be liable for shipping and labor charges.
This limited warranty does not cover and is void with respect
to the following: (i) any Product which has been improperly
installed, repaired, maintained or modified; (ii) any Product
which has been subjected to misuse (including any Product
used in conjunction with hardware electrically or mechanically
incompatible or used with accessories not approved by Seller),
abuse, accident, physical damage, abnormal operation,
improper handling, neglect, exposure to fire or liquid; (iii)
any Product operated outside published maximum ratings;
(iv) cosmetic damage; (v) any Product on which warranty
stickers or Product serial numbers have been removed,
altered, or rendered illegible; (vi) cost of installation, removal
or reinstallation; (vii) signal reception problems (unless caused
by defects in material and workmanship); (viii) damage as a
result of ire, lood, acts of God or other acts which are not the
fault of Seller and which the Product is not speciied to tolerate,
including damage caused by mishandling, shipping and blown
fuses; (ix) consumables (such as fuses); or (x) any Product
which has been opened, repaired, modified or altered by
anyone other than Seller or a Seller authorized service center.
USE ONLY SELLER APPROVED ACCESSORIES WITH SELLER
DEVICES. USE OF ANY UNAUTHORIZED ACCESSORIES
MAY BE DANGEROUS AND WILL INVALIDATE THE DEVICE
WARRANTY IF SAID ACCESSORIES CAUSE DAMAGE OR A
DEFECT TO THE DEVICE.
SELLER SPECIFICALLY DISCLAIMS LIABILITY FOR
ANY AND ALL DIRECT, INDIRECT, SPECIAL, GENERAL,
PUNITIVE, EXEMPLARY, AGGRAVATED, INCIDENTAL
OR CONSEQUENTIAL DAMAGES, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES, WHETHER
FORESEEABLE OR UNFORESEEABLE OF ANY KIND
WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOSS
OF PROFITS, UNANTICIPATED BENEFITS OR REVENUE,
ANTICIPATED PROFITS ARISING OUT OF USE OF OR
INABILITY TO USE ANY PRODUCT (FOR EXAMPLE,
WASTED AIRTIME CHARGES DUE TO THE MALFUNCTION
OF A PRODUCT) OR CONTRIBUTION OR INDEMNITY IN
RESPECT OF ANY CLAIM RELATED TO A PRODUCT.
REPAIR OR REPLACEMENT OF A DEFECTIVE PRODUCT
OR REFUND OF THE PURCHASE PRICE RELATING
TO A DEFECTIVE PRODUCT, AS PROVIDED UNDER
THIS WARRANTY, ARE YOUR SOLE AND EXCLUSIVE
REMEDIES FOR BREACH OF THE LIMITED WARRANTY,
AND SUBJECT TO THIS WARRANTY, THE PRODUCTS ARE
APPROVED AND ACCEPTED BY YOU "AS IS". SELLER
MAKES NO OTHER WARRANTIES, REPRESENTATIONS
OR CONDITIONS OF ANY KIND, ORAL OR VERBAL,
EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE,
WITH RESPECT TO THE PRODUCTS, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTY OR CONDITION
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OR AGAINST INFRINGEMENT OR ANY IMPLIED
WARRANTY OR CONDITION ARISING OUT OF TRADE
USAGE OR OUT OF A COURSE OF DEALING OR COURSE
O F P E R F O R M A N C E . N O D E A L E R , D I S T R I B U TO R ,
AGENT OR EMPLOYEE IS AUTHORIZED TO MAKE ANY
MODIFICATION OR ADDITION TO THIS WARRANTY.
Some jurisdictions do not allow the exclusion or limitation of
incidental or consequential damages, or allow limitations on
how long an implied warranty lasts, so the above limitations or
exclusions may not apply to you. This limited warranty gives
you speciic legal rights, and you may also have other rights
which vary from jurisdiction to jurisdiction.
For warranty support information, please contact your cellular
provider's Customer Care.
or return to the point of sale for the products.
14
15
16
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Create Date : 2012:11:15 15:31:02+08:00 Creator : Adobe InDesign CS6 (Windows) Modify Date : 2013:01:25 16:02:38+08:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Instance ID : uuid:d1eda661-93d9-4ee0-be34-70b73c80f80a Original Document ID : adobe:docid:indd:3df5dd53-2c07-11e0-aa4a-d990e16b0585 Document ID : xmp.id:3BEFD2EAF52EE2118ADD94B024CDF055 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:3AEFD2EAF52EE2118ADD94B024CDF055 Derived From Document ID : xmp.did:9438ED123A26E211A3E4B246BD179191 Derived From Original Document ID: adobe:docid:indd:3df5dd53-2c07-11e0-aa4a-d990e16b0585 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2012:11:15 15:31:02+08:00 Metadata Date : 2013:01:25 16:02:38+08:00 Creator Tool : Adobe InDesign CS6 (Windows) Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 2EXIF Metadata provided by EXIF.tools