ZTE R218Z Vodafone Mobile WiFi User Manual Mobile Wi Fi QSG R218Z EN Master 1 0125

ZTE Corporation Vodafone Mobile WiFi Mobile Wi Fi QSG R218Z EN Master 1 0125

Users Manual

Turn over for more information about using your Vodafone Mobile Wi-Fi.Choose Wi-Fi on your computer, smartphone or tablet settings, then select your Mobile Wi-Fi network name. Enter the password to connect and open the web app.When you first connect to the network you may be asked to activate your SIM. If you’re asked to unlock your SIM card, go to http://vodafonemobile.wifi and enter the PIN for your SIM.1 Open 2 Insert microSIM 3 Charge4 Start 5 ConnectGet connectedVodafone Mobile Wi-Fi R218z VodafonePower to youPush and hold the power keyNote: usage of SIM card adapters could damage the SIM card card reader.Your Vodafone Mobile Wi-Fi network name & passwordSSID sticker hereSSID sticker here
Download the monitor appThe Vodafone Mobile Wi-Fi Monitor app is a quick and easy way to monitor your network on a smartphone or tablet.Download the app from your device’s app store, or scan the appropriate QR code here to take you to the app store.iOS(iPhone or iPad)Android(smartphone or tablet)™Using the web interface at vodafonemobile.wifiYou can find the web app on vodafonemobile.wifi if it doesn’t appear automatically when you connect. Then login using the password admin.Then you can see your network and Wi-Fi status, how much data you have used, get help and support, and even send and receive SMS messages from your computer.Note for UK users only: if you are a Contract customer you can send and receive SMS. Pay As You Go customers will only receive network notificationsLED overviewTo find out more about your device, please visit vodafone.com/r218zBatteryLowChargingGoodWi-Fi signalWi-Fi offWPS activeWi-Fi (WLAN) activeSMS text messagesNo SMS(slow blinking:) SMS Inbox full(fast blinking:) Device update available at vodafonemobile.wifiUnread SMSMobile BroadbandConnected to 4GConnected to 2G/3GLow signalNo SIM detected, or PIN code required© Vodafone Group 2018. Vodafone and the Vodafone logos are trade marks of Vodafone Group. Any product or company names mentioned herein may be the trade marks of their respective owners.The term “Mobile Broadband” together with the ‘birds’ design is a trademark of GSMC Limited.
FCC RF Exposure Information (SAR) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the FederalDuring SAR testing, this device was set to transmit at its highest certified poweseparation of 10 mm. Although the SAR is determined at the highest certified power level, the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the cloutput. The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. This device is complied with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1specified in IEEE1528. The FCC has granted an Equipment Authorization for this model devicedevice is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC I For this device, the highest reported SAR value for usage near the body While there may be differences between the SAR levels of various SAR compliance for body-worn operation is based on a separation distance of exposure level compliant or lower to the reported level. To support bodybetween this device and your body. RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certified, and using such bodyFCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the manufactThe antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This einstalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, therinstallation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, theinterference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States.During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage . Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: SRQ-R218Z. For this device, the highest reported SAR value for usage near the body is 1.340 W/kg. While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirements. worn operation is based on a separation distance of 10 mm between the unit and the human body. Carry this device at least 10 mmexposure level compliant or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of worn accessory, which contains metal, was not tested and certified, and using such body-worn accessory should be avoided.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. located or operating in conjunction with any other antenna or transmitter. h the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frinstalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Communications Commission of the United States. r level in all tested frequency bands, and placed in positions that simulate RF exposure in usage near the body with the actual SAR level of the device while operating can be well below the maximum value. This is because the eless base station antenna, the lower the power The SAR limit set by the FCC is 1.6 W/kg. 1992 and had been tested in accordance with the measurement methods and procedures eported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model 10 mm away from your body to ensure RF worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 10 mm worn accessory should be avoided. conditions: (1) This device may not cause harmful interference, and (2) this device must accept any quipment generates, uses and can radiate radio frequency energy and, if not e is no guarantee that interference will not occur in a particular cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

Navigation menu