ZTE R218Z Vodafone Mobile WiFi User Manual Mobile Wi Fi QSG R218Z EN Master 1 0125
ZTE Corporation Vodafone Mobile WiFi Mobile Wi Fi QSG R218Z EN Master 1 0125
ZTE >
Users Manual
1 Open 2 Insert microSIM 3 Charge Get connected Vodafone Mobile Wi-Fi R218z Note: usage of SIM card adapters could damage the SIM card card reader. Vodafone Power to you 4 Start 5 Connect Choose Wi-Fi on your computer, smartphone or tablet settings, then select your Mobile Wi-Fi network name. Your Vodafone Mobile Wi-Fi network name & password Enter the password to connect and open the web app. SSIDsticker stickerhere here SSID When you first connect to the network you may be asked to activate your SIM. Push and hold the power key If you’re asked to unlock your SIM card, go to http://vodafonemobile.wifi and enter the PIN for your SIM. Turn over for more information about using your Vodafone Mobile Wi-Fi. Using the web interface at vodafonemobile.wifi LED overview You can find the web app on vodafonemobile.wifi if it doesn’t appear automatically when you connect. Then login using the password admin. Battery Low Charging Good Wi-Fi signal Wi-Fi off Then you can see your network and Wi-Fi status, how much data you have used, get help and support, and even send and receive SMS messages from your computer. WPS active Wi-Fi (WLAN) active SMS text messages No SMS (slow blinking:) SMS Inbox full Note for UK users only: if you are a Contract customer you can send and receive SMS. Pay As You Go customers will only receive network notifications (fast blinking:) Device update available at vodafonemobile.wifi Unread SMS Mobile Broadband Connected to 4G Connected to 2G/3G Low signal No SIM detected, or PIN code required Download the monitor app To find out more about your device, please visit vodafone.com/r218z The Vodafone Mobile Wi-Fi Monitor app is a quick and easy way to monitor your network on a smartphone or tablet. Download the app from your device’s app store, or scan the appropriate QR code here to take you to the app store. ™ The term “Mobile Broadband” together with the ‘birds’ design is a trademark of GSMC Limited. iOS (iPhone or iPad) Android (smartphone or tablet) © Vodafone Group 2018. Vodafone and the Vodafone logos are trade marks of Vodafone Group. Any product or company names mentioned herein may be the trade marks of their respective owners. FCC RF Exposure Information (SAR) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certified powe powerr level in all tested frequency bands, and placed in positions that simulate RF exposure in usage near the body with the separation of 10 mm.. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the cl closer you are to a wireless eless base station antenna, the lower the power output. The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. This device is complied with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1 C95.1-1992 1992 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528. The FCC has granted an Equipment Authorization for this model device with all reported eported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC IID: SRQ-R218Z. For this device, the highest reported SAR value for usage near the body is 1.340 W/kg. While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirements. SAR compliance for body-worn worn operation is based on a separation distance of 10 mm between the unit and the human body. Carry this device at least 10 mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body body-worn worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 10 mm between this device and your body. RF exposure compliance with any body-worn worn accessory, which contains metal, was not tested and certified, and using such body body-worn worn accessory should be avoided. FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the manufact manufacturer could void the user’s authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located located or operating in conjunction with any other antenna or transmitter. NOTE: This equipment has been tested and found to comply with h the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This e equipment quipment generates, uses and can radiate radio frequency fr energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, ther there e is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Create Date : 2018:01:25 16:28:59+09:00 Metadata Date : 2018:01:25 17:37:29+08:00 Modify Date : 2018:01:25 17:37:29+08:00 Creator Tool : Adobe Illustrator CS5 Thumbnail Width : 256 Thumbnail Height : 204 Thumbnail Format : JPEG Thumbnail Image : (Binary data 14478 bytes, use -b option to extract) Instance ID : uuid:96089c2f-6cc2-4c3a-a940-80165f663bd4 Original Document ID : xmp.did:DEA61E51BF2568118A6D8195472CB595 Document ID : xmp.did:8F8228C9A901E811B6FEF8891296D60C Rendition Class : proof:pdf Derived From Instance ID : uuid:22827552-1f6f-1c4d-ad9f-fb33b55718cd Derived From Document ID : xmp.id:123782e7-afd5-44f4-ab71-e78ea2cd35eb Derived From Original Document ID: xmp.did:DEA61E51BF2568118A6D8195472CB595 Derived From Rendition Class : proof:pdf History Action : converted, saved History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh), Adobe Illustrator CS5 History Changed : /, / History When : 2016:10:28 13:58:36+01:00, 2018:01:25 16:28:57+08:00 History Instance ID : xmp.iid:8F8228C9A901E811B6FEF8891296D60C Format : application/pdf Title : Mobile Wi-Fi QSG R218Z EN Master-1 0125 Producer : Adobe PDF library 9.90 Trapped : False N Pages : 1 Has Visible Transparency : True Has Visible Overprint : True Max Page Size W : 277.988889 Max Page Size H : 209.197222 Max Page Size Unit : Millimeters Font Name : Helvetica, VodafoneRg-Bold, VodafoneRg-Regular, VodafoneLt-Regular, VodafoneExB-Regular Font Family : Helvetica, Vodafone Rg, Vodafone Rg, Vodafone Lt, Vodafone ExB Font Face : Regular, Bold, Regular, Regular, Regular Font Type : TrueType, Open Type, Open Type, Open Type, Open Type Font Version : 1.0, Version 1.00 ; 20 December 2005, Version 1.00 ; 20 December 2005, Version 1.00 : 20 December 2005, Version 1.00: 20 December 2005 Font Composite : False, False, False, False, False Font File Name : Helvetica_0.ttf, VodafoneRgBd_0.ttf, VodafoneRg_0.ttf, VodafoneLt_0.ttf, VodafoneExBd_0.ttf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE 485 C Swatch Group Name : 默认色板组 Swatch Group Type : 0 Swatch Colorant Swatch Name : PANTONE 485 C Swatch Colorant Type : SPOT Swatch Colorant Tint : 100.000000 Swatch Colorant Mode : CMYK Swatch Colorant Cyan : 0.000000 Swatch Colorant Magenta : 94.999999 Swatch Colorant Yellow : 100.000000 Swatch Colorant Black : 0.000000 Page Count : 3 Creator : Adobe Illustrator CS5EXIF Metadata provided by EXIF.tools