ZTE Z6200CA LTE OBDII Hotspot User Manual Z6200 Product Safety and Warranty Information
ZTE Corporation LTE OBDII Hotspot Z6200 Product Safety and Warranty Information
ZTE >
Contents
- 1. User Manual
- 2. Product Safety and Warranty Information
Product Safety and Warranty Information
LEGAL INFORMATION Copyright © 2016 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written Z6200CA Product Safety and Warranty Information permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. LEGAL INFORMATION .................................................................... 2 Regulatory and Safety Information Regulatory and Safety Information ................................................ 4 To the Owner To the Owner ....................................................................... 4 • To the Users ........................................................................ 4 Radio Frequency (RF) Energy ............................................. 5 FCC Compliance ................................................................. 6 • Warranty .......................................................................................... 7 Consumer Limited Warranty ................................................ 7 • • • Operating the device may interfere with medical instruments such as hearing aids and pacemakers. Always keep the device more than 8 inches (20 cm) away from such medical instruments when your device is powered on. Power off the device if necessary. Consult a physician or the manufacturers of medical instruments before using the device if necessary. Be aware of the usage limitation when using the device at places such as oil warehouses or chemical factories, where there are explosive gases or explosive products being processed. Power off the device if necessary. Do not use electronic transmission devices in aircrafts, at petrol stations or in hospitals. Observe and obey all warning signs, and power off the device in these conditions. Keep the device out of the reach of small children. The device may cause an injury if used as a toy. When the device is operating, do not touch the metallic parts. Failing to do so may cause burns. To the Users • • • Use original accessories or accessories that are authorized. Using any unauthorized accessories may affect the performance of the device and violate the related national regulations about telecom terminals. Avoid using the device near or inside metallic constructions or establishments that can emit electromagnetic waves, because signal reception may be affected. The device is not waterproof. Keep the device dry and store it in a • • • • • shady and cool place. Do not use the device immediately after a sudden temperature change, because dew may be generated inside and outside the device. Do not use it until it becomes dry. Handle the device carefully. Do not drop, bend or strike it. Otherwise the device may be damaged. Only qualified personnel can dismantle and repair the device. An operating temperature between -4°F ~ 158°F (-20°C and +70°C) and humidity between 5% and 95% are recommended. Do not insert or remove the device from the OBD II port at gas stations or places where there are explosive gases or explosive products being processed. FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. from a supplier authorized by the Seller. Transfer or resale of a Note: The country code selection is for non-U.S. models only and is Product will automatically terminate warranty coverage with respect to not available to all U.S. models. Per FCC regulation, all Wi-Fi® that Product. This limited warranty is not transferable to any third party, products marketed in the U.S. must be fixed to U.S. operation including but not limited to any subsequent purchaser or owner of the channels only. Product. This limited warranty is applicable to end users in the United Radiation Exposure Statement This device meets the government’s requirements for exposure to radio waves. States and Puerto Rico. Seller will, at its sole and absolute discretion, either repair or replace a Product (which unit may use refurbished parts of similar quality and functionality) if found by Seller to be defective in material or This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. workmanship, or if Seller determines that it is unable to repair or replace such Product, Seller will refund the purchase price for such Product, provided that the subject Product (i) is returned to a Seller authorized service center within the one year warranty period, and (ii) is accompanied by a proof of purchase in the form of a bill of sale or receipted invoice which evidences that the subject Product is within the one year warranty period. After the one year warranty period, you must pay all shipping, parts and labor charges. In the event that the product is deemed unrepairable or has been removed from the list of FCC ID: SRQ-Z6200CA products supported by the Seller, you will only be liable for shipping and labor charges. Warranty This limited warranty does not cover and is void with respect to the Consumer Limited Warranty repaired, maintained or modified; (ii) any Product which has been following: (i) any Product which has been improperly installed, ZTE (“Seller”) offers you a limited warranty that the enclosed product or products (the “Product”) will be free from defects in material and workmanship for a period that expires one year from the date of sale of the Product to you, provided that you are the original end-user purchaser of the Product and provided that your purchase was made subjected to misuse (including any Product used in conjunction with hardware electrically or mechanically incompatible or used with accessories not approved by Seller), abuse, accident, physical damage, abnormal operation, improper handling, neglect, exposure to LOSS OF PROFITS, UNANTICIPATED BENEFITS OR REVENUE, fire or liquid; (iii) any Product operated outside published maximum ANTICIPATED PROFITS ARISING OUT OF USE OF OR INABILITY ratings; (iv) cosmetic damage; (v) any Product on which warranty TO USE ANY PRODUCT (FOR EXAMPLE, WASTED AIRTIME stickers or Product serial numbers have been removed, altered, or CHARGES DUE TO THE MALFUNCTION OF A PRODUCT) OR rendered illegible; (vi) cost of installation, removal or reinstallation; (vii) CONTRIBUTION OR INDEMNITY IN RESPECT OF ANY CLAIM signal reception problems (unless caused by defects in material and RELATED TO A PRODUCT. REPAIR OR REPLACEMENT OF A workmanship); (viii) damage the result of fire, flood, acts of God or DEFECTIVE PRODUCT OR REFUND OF THE PURCHASE PRICE other acts which are not the fault of Seller and which the Product is not RELATING TO A DEFECTIVE PRODUCT, AS PROVIDED UNDER specified to tolerate, including damage caused by mishandling, THIS WARRANTY, ARE YOUR SOLE AND EXCLUSIVE REMEDIES shipping and blown fuses; (ix) consumables (such as fuses); or (x) any FOR BREACH OF THE LIMITED WARRANTY, AND SUBJECT TO Product which has been opened, repaired, modified or altered by THIS WARRANTY, THE PRODUCTS ARE APPROVED AND anyone other than Seller or a Seller authorized service center. ACCEPTED BY YOU “AS IS”. SELLER MAKES NO OTHER USE ONLY SELLER APPROVED ACCESSORIES WITH SELLER WARRANTIES, REPRESENTATIONS OR CONDITIONS OF ANY DEVICES. USE OF ANY UNAUTHORIZED ACCESSORIES MAY BE KIND, ORAL OR WRITTEN, EXPRESS OR IMPLIED, STATUTORY DANGEROUS AND WILL INVALIDATE THE DEVICE WARRANTY IF OR OTHERWISE, WITH RESPECT TO THE PRODUCTS, SAID ACCESSORIES CAUSE DAMAGE OR A DEFECT TO THE INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OR DEVICE. SELLER SPECIFICALLY DISCLAIMS LIABILITY FOR ANY CONDITION OF MERCHANTABILITY OR FITNESS FOR A ZTE; Mobley; ZTE Mobley; ZTE Z6200; ZTE Mobley Z6200; ZTE Mobley Product Safety and Warranty Information; ZTE Mobley Z6200 Product Safety and Warranty Information; ZTE Mobley Product Safety; ZTE Mobley Warranty Information; ZTE Mobley Product Safety;{AND ALL DIRECT, INDIRECT, SPECIAL, GENERAL, PUNITIVE, EXEMPLARY, AGGRAVATED, INCIDENTAL OR CONSEQUENTIAL PARTICULAR PURPOSE OR AGAINST INFRINGEMENT OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF TRADE USAGE OR OUT OF A COURSE OF DEALING OR COURSE OF PERFORMANCE. NO DEALER, DISTRIBUTOR, AGENT OR EMPLOYEE IS AUTHORIZED TO MAKE ANY MODIFICATION OR ADDITION TO THIS WARRANTY. DAMAGES, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH Some jurisdictions do not allow the exclusion or limitation of incidental DAMAGES, WHETHER FORESEEABLE OR UNFORESEEABLE OF or consequential damages, or allow limitations on how long an implied ANY KIND WHATSOEVER, INCLUDING BUT NOT LIMITED TO warranty lasts, so the above limitations or exclusions may not apply to 10 you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from jurisdiction to jurisdiction. For warranty service information, please call the following telephone number: 1-800-617-5065. IMPORTANT: Please provide warranty information (proof of purchase) to ZTE in order to receive warranty service at no charge. If the warranty has expired on the device, charges may apply. 11
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 6 XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Producer : GPL Ghostscript 9.10 Keywords : Modify Date : 2017:06:13 15:13:50+08:00 Create Date : 2016:09:02 15:16:21+08:00 Creator Tool : PDFCreator Version 1.7.3 Metadata Date : 2017:06:13 15:13:50+08:00 Document ID : uuid:a8f816c5-7338-11e6-0000-bb13a4596f5e Instance ID : uuid:d0d256e8-01dc-4018-ab7e-10dff5246e44 Format : application/pdf Title : Z6200 Product Safety and Warranty Information Creator : amqian Description : Description (x-repair) : Author : amqian Subject :EXIF Metadata provided by EXIF.tools