ZTE Z917 Ufi User Manual User Guide

ZTE Corporation Ufi User Guide

Contents

User Guide

TCS530100.12.875”4.875”2.875”
GETTING TO KNOW YOUR MOBILE HOTSPOTLED indicatorsCharging & USB portON/OFF switch WPS keymicro-SIM card slotPart Description ON/OFF switchSlide it to turn on/off the Hotspot.micro-SIM card slotInstall the micro-SIM card (included).WPS keyWhen the Wi-Fi function is enabled, hold it for more than 3 seconds to activate the WPS function.1
LED indicatorsIt shows the signal strength, battery, Wi-Fi and message.Charging/USB port  Charge your device. Connect the client to your device via USB cable.Reset pointInsert a pin and hold it for 3 seconds to reset your device.2
INDICATORSWhen the Hotspot is powered on, the following icons will light up. For a description of the icons, refer to the following table.Indicator Status DescriptionNetworkRed solidLimited or no service, no SIM card or SIM card error, registered to the LTE/UMTS/HSPA network.Green solidRegistered to the UMTS or HSPA network and connected to UMTS or HSPA network.Blue solidRegistered to LTE network and connected to LTE network.3
SMSBlue solidYou have unread messages or FOTA (new software).Blue blinkingYour inbox is full or FOTA upgrading.LED light offNo unread messages or no new messages.Wi-FiBlue solid Wi-Fi is on.Blue blinking WPS is active.LED light off Wi-Fi is off.BatteryRed solid The battery is low. (From 10% to dead) Please charge the battery.Green blinkingThe battery is being charged.Green solidThe battery level is middle or high. (From 100% to 11%)LED light offThe battery is not inserted.4
SET UP YOUR MOBILE HOTSPOT1. Lift SIM card cover.2. Install SIM card. 5
3. Power on.Slide to turn onCharge your Mobile HotspotYou can charge your Mobile Hotspot by using the charger included in the box or by plugging it into your computer using the USB cable.6
Install the battery1. Remove the cover.2. Install the battery.7
CONNECT & GOConnect your Wi-Fi device to your Mobile Hotspot1. Power on your Mobile Hotspot.2. On your computer or other Wi-Fi enabled device, search for available Wi-Fi Networks and select the default Network Name (SSID) for your Mobile Hotspot.Note:You can view the label on the device to get the default Wi-Fi SSID and password.3. Enter the default password and click OK.4. Open a web browser and go to www.T-Mobile.com/ConnectMe Simply follow the on-screen instructions to set up your No Annual Contract data service.Note: Service or use is your agreement to T-Mobile’s Terms and Conditions. T-Mobile requires ARBITRATION of disputes UNLESS YOU OPT-OUT WITHIN 30 DAYS OF ACTIVATION. See T-Mobile’s Terms and Conditions for details at www.T-Mobile.com/terms-conditions.8
USE THE WPSIf your client device supports WPS, you don’t have to input the password manually after WPS has been available. Please do the following steps:1. Power on your Mobile Hotspot and enable the Wi-Fi function.2. Press and hold the WPS key on your device for more than 3 seconds to start Wi-Fi Protected Setup authentication process.3. Enable the WPS function on your client to respond to this authentication process.4. Follow the system prompts on your client to nish the connection.NOTE: For the detailed operations about the client, please refer to the client’s instruction.9
MANAGING YOUR MOBILE HOTSPOT 10
Access T-Mobile 4G LTE Mobile HotspotYou can access your 4G LTE HotSpot device information, using an Internet browser To access using a browser, do the following:1. Connect to your hotspot device via Wi-Fi using the network connection software on your computer. Provide the Wi-Fi network password, if requested.2. Open a browser and enter http://Mobile.Hotspot in the address bar. The T-Mobile 4G LTE Mobile Hotspot login screen appears.3. Enter your Password in the eld provided. The default password is admin.4. Select the Save Password checkbox if you wish to bypass the login screen in the future.5. Click Login. If you entered the correct password, the Dashboard screen appears.11
To access via USB cable, do the following:1. Connect your hotspot device to the PC with USB cable.2. Power on your device.3. The OS detects and recognizes new hardware and nishes the installation automatically. After successful installation, the icon will appear on your desktop.Note: If the system does not launch installation automatically, you can run the installation program in path of My Computer > Mobile Hotspot.4. Double click the icon to open the login screen.5. Enter your Password in the eld provided. The default password is admin.6. Select the Save Password checkbox if you wish to bypass the login screen in the future.7. Click Login. If you entered the correct password, the Dashboard screen appears.12
Change Mobile Hotspot Admin Password1. Access http://Mobile.Hotspot. 2. Click Settings in the navigation area.3. Select the Device Settings tab. 4. Follow steps under Account Management to update your Password.5. Click Apply. If everything is entered correctly, the Admin Password Changed dialog appears indicating the password was successfully changed.Change Mobile Hotspot Network Name (SSID)1. Access http://Mobile.Hotspot.2. Click Settings in the navigation.3. Select the Wi-Fi Settings tab.4. Change the name that appears in the Network Name (SSID) eld in the Wi-Fi Settings area.5. Select or deselect the Broadcast Network Name checkbox to enable or disable broadcasting the hotspot’s Network Name (SSID).13
6. Click Apply to save your changes on the Wi-Fi Settings tab of the Settings screen.Change Mobile Hotspot Wi-Fi Password1. Access http://Mobile.Hotspot.2. Click Settings in the navigation area.3. Select the Wi-Fi Settings tab.4. Change the value that appears in the Password eld in the SSID area.5. Click Apply in the SSID area to save your changes on the Wi-Fi Settings tab of the Settings screen.How to use Mobile Hotspot’s Whitelist FunctionYour Mobile Hotspot has whitelist setting function to effectively prevent the network attack, when the user turned off this feature, all user input correct password can access via Wi-Fi; But when the user turned on this function, without further to enter the user's MAC address, all users will not be able to access the Mobile Hotspot, only those users whose MAC address in the whitelist can access.14
1. Log in the web UI.2. Select Settings > Wi-Fi Settings > Allowed Devices.3. The switch is off by default, all user input correct password can access.4. After open the whitelist function, you need to know the user client’s MAC address and add to the list, the format is XX:XX:XX:XX:XX:XX. You can add up to 10 devices if they are all going to connect, because the Wi-Fi chip can only support 10 devices connected at the same time.15
5. If you want to remove some users in the whitelist, that means they are no longer allowed to connect, click the button, and then click Yes to remove.16
ADDITIONAL INFORMATIONWi-Fi: Capable devices required. Devices using wireless connections may be vulnerable to unauthorized attempts to access data and software stored on the device. Plan data allotment applies to use by connected devices sharing Wi-Fi. Use of connected devices subject to T-Mobile Terms and Conditions.Mobile Internet Postpaid Data Passes: Qualifying postpaid plan and qualifying credit required. SIM Starter Kit may be required. Passes do not include voice or messaging. Pass charges will appear on bill statement for effective date of the pass. May purchase one add’l pass in same category prior to expiration of active pass. Partial megabytes rounded up. Full speeds available up to specied data allotment, including tethering then slowed to up to 2G speeds for remainder of billing cycle. No domestic or international roaming, unless Pass is specically for roaming. Service available for time/usage amount provided by pass. For time period, a day is 12 am to 11:59 pm Pacic Time. Usage applied rst to passes, next to any applicable promotional data, then monthly plan allotment. 17
Mobile Internet Pay In Advance Data Passes: Limited time offer; subject to change. Not all features available on all devices. SIM starter kit may be required. Service available for time period and/or usage amount provided by Pass. For time period, a day is 12:00 am to 11:59 pm, Pacic Time. Usage rounded up to the nearest MB each session. Only one Pass may be active at a time. Account suspended after 365 days of inactivity. Data only; does not include voice, messaging or Wi-Fi services. Domestic only; no roaming. Usage applied rst to on demand passes, next to free data, then monthly Mobile Internet allotment.Device and screen images simulated. Coverage: Service not available in some areas. See brochures and Terms and Conditions (including arbitration provision) at www.T-Mobile.com, for additional information, coverage maps, and restrictions and details. T -Mobile and the magenta color are registered trademarks of Deutsche Telekom AG. © 2016 T-Mobile USA, Inc.18
ADDITIONAL HELP T-Mobile Hotspot URL: http://Mobile.Hotspot/ or IP address: 192.168.0.1. From http://Mobile.Hotspot, click for help. Get in touch, free of charge: Just dial 611 from your T -Mobile phone or call 1-877-453-1304. Customer Care representatives are available from 3 a.m. to 10 p.m. Pacic time, daily. Automated account help is available 24 hours a day, 7 days a week. 19
TCS530100.12.875”4.875”2.875”

Navigation menu