ZTE ZTEA931GPLUS GSM Dual-Band Digital Moblie Phone User Manual Exhibit09 user manual

ZTE Corporation GSM Dual-Band Digital Moblie Phone Exhibit09 user manual

Manual

Download: ZTE ZTEA931GPLUS GSM Dual-Band Digital Moblie Phone User Manual Exhibit09 user manual
Mirror Download [FCC.gov]ZTE ZTEA931GPLUS GSM Dual-Band Digital Moblie Phone User Manual Exhibit09 user manual
Document ID1067095
Application IDwteRQwSGukHBtFDm5z1/jw==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize16.1kB (201307 bits)
Date Submitted2009-02-12 00:00:00
Date Available2009-02-12 00:00:00
Creation Date2009-02-12 08:00:18
Producing SoftwareAcrobat Distiller 8.1.0 (Windows)
Document Lastmod2009-02-12 08:00:18
Document TitleMicrosoft Word - Exhibit09.user_manual.doc
Document CreatorPScript5.dll Version 5.2
Document Author: Xuezhen

A931G+
User Manual
Notice
Copyright © 2008 ZTE CORPORATION
All Rights Reserved
Your A931G+ is made exclusively for ZTE by ZTE CORPORATION.
No part of this manual may be reproduced or transmitted in any form or by any
means without prior written consent of ZTE CORPORATION.
Trademarks
ZTE and the ZTE logos are trade marks of the ZTE CORPORATION.
Notice
The information in this manual is subject to change without notice. Every effort has
been made in the preparation of this manual to ensure accuracy of the contents,
but all statements, information, and recommendations in this manual do not constitute
a warranty of any kind, expressed or implied. Please read the safety precautions
carefully to ensure the correct and safe use of your mobile phone. For detailed
information, refer to the section “Important Safety Precautions”.
ZTE CORPORATION Address:
ZTE Plaza, Keji Road South, Hi-tech Industrial Park, Nanshan District, Shenzhen,
P. R. China
Postal Code: 518057
Website: http://www.zte.com.cn
V1.0
-3-
Important safety precautions
Road safety
Full attention should be given to driving at all times in order to reduce the risk of an
accident. Using a phone while driving causes distraction and can lead to an
accident. You should comply with local laws and regulations restricting the use of
wireless devices while driving.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service station) or near fuels or
chemicals.
Aircraft
Mobile phones can cause interference. Consult airport and airline staff about the
use of the phone on aircraft. Switch off the phone whenever you are instructed to do so.
Switch off the phone near all medical equipments
Hospitals or health care facilities may be using equipment that could be sensitive to
external radio frequency energy. Follow any regulations or rules in force.
Interference
All mobile phones may be subject to interference, which could affect their
performance.
Be aware of special regulations
Meet any special regulations in force in any area and always switch off your phone
whenever it is forbidden to use it, or when it may cause interference or danger.
-4-
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear).
Emergency calls
Key in the emergency number for your present location, then press the green Send
key.
Keep your phone away from small children
Keep the phone and all its parts, including accessories, out of reach of small
children. The product contains small parts with sharp edges that may cause injury
or which may become detached and create a choking hazard.
Accessories and batteries
Use only ZTE-approved batteries and accessories. Use of any unauthorized
accessories could damage you or your phone and may be dangerous. Dispose of
used batteries according to the manufacturer’s instructions.
At very high volume, prolonged listening to a mobile phone can
damage your hearing.
Qualified service
Do not attempt to disassemble your phone or its accessories. Only qualified
service personnel may repair your phone.
-5-
Health and safety information
Radio Frequency (RF) Energy
•
This model phone meets the government’s requirements for
exposure to radio waves.
•
This phone is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government:
•
The exposure standard for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR limit set
by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating
positions accepted by the FCC with the phone transmitting at its highest certified
power level in all tested frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the phone while operating
can be well below the maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the poser required to reach the
network. In general, the closer you are to a wireless base station antenna, the
lower the power output.
•
The highest SAR value for the model phone as reported to the FCC
when tested for use at the ear is 0.867 W/kg and when worn on the body, as
described in this user guide, is 0.823 W/kg (Body-worn measurements differ
among phone models, depending upon available enhancements and FCC
requirements.)
•
While there may be differences between the SAR levels of various
phones and at various positions, they all meet the government requirement.
•
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance with the FCC RF
-6-
exposure guidelines. SAR information on this model phone is on file with the
FCC and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on
FCC ID: Q78-ZTEA931GPLUS.
•
For body worn operation, this phone has been tested and meets the
FCC RF exposure guidelines for use with an accessory that contains no metal
and the positions the handset a minimum of 1.5 cm from the body. Use of other
enhancements may not ensure compliance with FCC RF exposure guidelines. If
you do no t use a body-worn accessory and are not holding the phone at the ear,
position the handset a minimum of 1.5 cm from your body when the phone is
switched on.
Precautions when using batteries
• Never use a charger or battery that is damaged in any way.
•
Use the battery only for its intended purpose.
•
If you use the phone near a network base station, the phone uses
less power. Talk and standby times are greatly affected by the signal strength on
the cellular network and the parameters set by the network operator.
•
Battery charging time depends on the remaining battery charge, the
type of battery, and the charger used. The battery can be charged hundreds of
times, but it will gradually wear out. When the operation time is noticeably shorter
than normal, it is time to buy a new battery.
•
If left unused, a fully charged battery will discharge itself over time.
•
Use only ZTE-approved batteries, and recharge your battery only
with ZTE-approved chargers. Disconnect the charger from the power source
when it is not in use.
•
Extreme temperatures will affect the charging capacity of your
-7-
battery: it may require cooling or warming first.
•
Do not leave the battery in hot or cold places because the capacity
and lifetime of the battery will be reduced. Try to keep the battery at room
temperature. A phone with a hot or cold battery may not work temporarily, even
when the battery is fully charged. Li-ion batteries are particularly affected by
temperatures below 0℃ (32℉).
•
Do not short circuit the battery. Accidental short circuiting can occur
when a metallic object like a coin, clip or pen causes a direct connection between the
+ and - terminals of the battery (metal strips on the battery). For example, do not carry
a spare battery in a pocket or bag where the battery may contact metal objects.
Short circuiting the terminals may damage the battery or the object causing the
short circuiting.
•
Dispose of used batteries in accordance with local regulations.
Always recycle. Do not dispose of batteries in a fire.
Road safety
Your mobile phone gives you the powerful ability to communicate by voice,
almost anywhere, anytime. But an important responsibility accompanies the
benefits of mobile phones, one that every user must uphold. When driving a car,
driving is your first responsibility. Using a phone while driving causes distraction and
can lead to an accident. When using your mobile phone while driving, follow local
regulations in the country or region you are in.
Operating environment
Remember to follow any special regulations in force in the area you are in, and
always switch off your phone whenever it is forbidden to use it, or when it may
cause interference or danger.
When connecting the phone or any accessory to another device, read its user’s
-8-
guide for detailed safety instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, for the satisfactory operation of the
equipment and for the safety of personnel, it is recommended that the device
should only be used in the normal operating position (held to your ear).
Electronic devices
Most modern electronic equipment is shielded from radio frequency (RF) signals.
However, certain electronic equipment may not be shielded against the RF signals from
your mobile phone. Consult the manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum distance of 15 cm (6 inches)
be maintained between a mobile phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are consistent with
the independent research and recommendations of Wireless Technology
Research. If you have any reason to suspect that interference is taking place,
switch off your phone immediately.
Hearing aids
Some digital mobile phones may interfere with some hearing aids. In the event of
such interference, you may wish to consult your hearing aid manufacturer to discuss
alternatives.
Other medical devices
If you use any other personal medical devices, consult the manufacturer of your
device to determine if it is adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this information. Switch off your
phone in health care facilities when regulations posted in these areas instruct you
to do so.
-9-
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles. Check with the manufacturer or its representative
regarding your vehicle.
You should also consult the manufacturer of any equipment that has been
added to your vehicle.
Posted facilities
Switch off your phone in any facility where posted notices require you to do so.
- 10 -
Potentially explosive environments
Switch off your phone when in any area with a potentially explosive atmosphere, and
obey all signs and instructions to turn off mobile phones and other radio
equipment. Sparks in such areas could cause an explosion or fire resulting in
bodily injury or even death.
Users are advised to switch off the phone while at a refuelling point (service
station). Users must observe restrictions on the use of radio equipment in fuel
depots (fuel storage and distribution areas), chemical plants, or where blasting
operations are in progress.
Areas with a potentially explosive atmosphere are often but not always clearly
marked. They include the areas below decks on boats, chemical transfer or
storage facilities, vehicles using liquefied petroleum gas, such as propane or
butane, areas where the air contains chemicals or particles, such as grain, dust or
metal powders, and any other area where you would normally be advised to turn
off your vehicle engine.
Emergency calls
This phone, like any mobile phone, operates using radio signals, wireless,
and landline networks as well as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore, you should never rely solely on
any mobile phone for essential communications like medical emergencies.
To make or receive calls, the phone must be switched on and in a service area with
adequate signal strength. Emergency calls may not be possible on all mobile phone
networks or when certain network services and/or phone features are in use.
Check with local service providers.
To make an emergency call:
1. Switch on the phone.
- 11 -
2. Key in the emergency number for your present location. Emergency numbers vary
by location.
3. Press the green Send key.
Certain features like Call Barring may need to be deactivated before you can make an
emergency call. Consult this document and your local cellular service provider.
Other important safety information
•
Only qualified personnel should service the phone or install the
phone in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.
•
Check regularly that all mobile phone equipment in your vehicle is
mounted and operating properly.
•
Do not store or carry flammable liquids, gases, or explosive
materials in the same compartment as the phone, its parts, or accessories.
•
For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including installed or portable
wireless equipment, in the area over the air bag or in the air bag deployment area.
Improperly installed wireless equipment could result in serious injury if the air
bag inflates.
•
Mobile phones can cause interference. Consult airport and airline
staff about the use of the phone on aircraft. Switch off the phone whenever you are
instructed to do so.
•
Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
Care and maintenance
Your phone is a product of superior design and craftsmanship and should be
treated with care.
- 12 -
•
Keep your phone and all its parts and accessories out of reach of
small children and pets. They may inadvertently damage these things or choke on
small parts.
•
Keep the phone dry. Precipitation, humidity, and liquids contain
minerals that corrode electronic circuits.
•
Do not use the phone with a wet hand. Doing so may cause an
electric shock to you or damage to the phone.
•
Do not use or store the phone in dusty, dirty areas, as its moving
parts may be damaged.
•
Do not store the phone in hot areas above 60℃ (140℉). High
tempera- tures can shorten the life of electronic devices, damage batteries, and
warp or melt certain plastics.
•
Do not store the phone in cold areas. When the phone warms up
to its normal operating temperature, moisture can form inside the phone, which may
damage the phone’s electronic circuit boards.
•
Do not drop, knock, or shake the phone. Rough handling can break
internal circuit boards.
•
Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the phone. Wipe it with a soft cloth.
•
Do not paint the phone. Paint can clog the device’s moving parts
and prevent proper operation.
•
Do not put the phone in or on heating devices, such as a microwave
oven, stove, or radiator. The phone may explode when overheated.
•
If the phone, battery or charger is not working properly, take it to
your nearest qualified service facility. The personnel there will assist you, and if
necessary, arrange for service.
- 13 Caution: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that
this device does not cause harmful interference.
- 14 -
Your phone
4-Way Navigation keys
and Centre key
In standby mode
accesses:
Up-Settings
Down-WAP
Left-Tones and Images
Right-Messaging
Centre-Main Menu
Earpiece
Display
Left/Right soft keys
Performs the function
indicated at the bottom of
the display.
Send key
Dials a phone number
and answers a call. In
standby mode, shows the
history of calls made,
received and missed.
End/Power key
Alpha numeric keys
In standby mode,
inputs numbers to dial.
* key
key
- 15 -
Interface icons
Icon Description
Icon Description
Signal strength
New message
Call diverting
Silent profile
Roaming
Alarm clock set
Vibration
Battery status
Headset
GPRS online
Battery
The lithium battery of the mobile phone can be immediately used after unpacking. A new
battery performs best after performing a full charge/discharge 3 times.
Installing the battery
1. Insert the battery by aligning the gold contacts on the battery with the gold
contacts in the battery compartment on the phone.
2. Push down on the upper section of the battery until it clicks into place.
3. Replace the battery cover and press it gently until you hear a click.
Pull down the Battery
Slide down the cover until you hear a click
- 16 -
Removing the battery
1. Ensure that your mobile phone is switched off.
2. Remove the battery cover.
3. Pull the battery up and remove it from the mobile phone.
Slide up the cover
Pull up the battery from here
How to insert the SIM card
You want a mobile phone that is sophisticated yet easy to use and here it is in
your hands! Naturally you are eager to start using it, but first you need to insert the
SIM card.
Insert the SIM card as follows:
•
Ensure that the phone is switched off and the charger is
disconnected from the phone.
•
Turn the phone over and remove the back cover.
•
If the battery is already inside, remove it!
•
Hold your SIM card with the cut corner oriented as shown and then
slide it into the card holder face down.
•
Replace the battery first.
- 17 -
•
Replace the back cover.
Insert the SIM card
Pull out the SIM card
What is a SIM card ?
Every mobile phone has a SIM card (Subscriber Identity Module). This is a
micro-chip that holds your personal information such as names and phone
numbers. Your phone won’t work without it. If you already have contacts on your
SIM card, they can be transferred in most cases.
How to charge the battery
Your phone is powered by a rechargeable battery. The battery needs to be
charged for at least 6-8 hours before you can make your first call.
•
Connect your travel adapter to the right side of your mobile phone
as shown in the diagram.
•
Connect the other end of the travel adapter to the mains socket.
•
Note: The side with arrow should be upright while connecting.
•
If you are charging the battery when the mobile is switched off, the
display will show the battery icon with the bars moving from right to left. If charging the
battery when the mobile is switched on, the display will show the battery icon with a
- 18 -
lightning strike.
•
When the battery is fully charged, disconnect the charger.
Power on/off your phone
Ensure that your SIM card is in your mobile phone and that the battery is charged.
Please hold the End key to power on/off the phone. The phone will automatically
search for the network.
Display information
Besides sending and receiving calls, you can also do:
¾ Press Left soft key to enter main Menu.
¾ Press Right soft key to view Contacts.
¾ Press Send key in standby mode to enter Call menu list.
¾ Press End key to exit to standby mode.
¾ You can customise the fastkey settings of 4-Way Navigation key for
standby mode.
Note: In this User Manual to “press” a key means to press the key and release it.
To “hold” a key means to keep pressing the key.
- 19 -
Menu tree
1. Games
1.1 Tetris
1.2 Push box
2. Call Menu
2.1 Calls
2.2 Diverts
3. Tools
3.1 Alarm
3.2 FM radio
3.3 Calculator
3.4 World clock
3.5 Calendar
3.6 Conversion
4. Profiles
4.1 Normal
4.2 Meeting
4.3 Outdoor
4.4 Silent
4.5 Headset ( appears only when
headset is connected )
5. Messaging
5.1 New message
5.2 Inbox
5.3 Sentbox
5.4Unsentbox
5.4 Draftbox
5.5 Message settings
5.6 Voicemail
5.7 Cell info.
6. Tones and Images
6.1 Images
6.2 Tones
6.3 Space usage
7. SIM
8. WAP
9. Settings
9.1 Phone settings
9.2 Display settings
9.3 Clock settings
9.4 Call settings
9.5 Fixed dialling number
9.6 Service dialling number
9.7 Network settings
9.8 Security settings
9.9 Factory settings
Writing text
•
Change input mode: Press # key to change the input mode
(input modes: Eng, ABC, abc, Abc, Fr,Es and 123).
•
Input Letters: In ABC/abc/Abc/123 mode, press the corresponding
letter key till the letter appears.
•
Input Words: In Eng/Fr/Es mode, key-in any letter with a
single key press. Press each key only once for every letter. The word changes
after each key stroke. When you have finished writing the word and it is correct,
confirm it by pressing 0 or the Centre key. Pressing a Navigation key moves the
cursor. Predictive text input is based on a built-in dictionary.
- 20 -
•
Input Digits: In 123 mode, press digit key once to key-in a digit.
In ABC/abc/Abc mode, long press the number key. In Eng /Fr/Es mode,
press the number key, and select the number by pressing a Navigation key.
•
Input Symbol: Press * key to enter a symbol. In ABC/abc/Abc mode,
press 1 key till the required symbol (common symbols) appears. In Eng /Fr/Es
mode, press 1 key to display symbols, and press Down key to display more
symbols. Press Navigation keys to select the required symbol and confirm it by
pressing the Centre key.
•
Selecting Template: Hold * key to open Templates. Select the
required template.
•
Input Space: Press 0 key to input space. It does not work in 123
mode.
•
Delete Character: Press Right soft key to clear a character.
•
Delete all Characters: Press and hold Right soft key to delete all
characters and clear the display.
•
Move Cursor to Left or Right: Press Left/Right navigation keys to
move the cursor left or right.
How do I add people to my Contacts
There are some phone numbers that you may want to call again and again so it
makes sense to add these numbers to your Contacts. You can then access these
numbers quickly and easily.
•
Press Right soft key to choose [Contacts]
•
Press Left soft key [Options], and then select Add new Contact.
•
Select whether to save the new contact to your SIM card or to the
phone’s memory.
•
Enter the contact’s phone number.
- 21 -
•
Press Left soft key [OK], then enter a name and click Centre key to
confirm.
•
If Phone is selected to save new contact, you need also to select the
group and then confirm by clicking Centre key.
You can also save a number right after you’ve made or received a phone call
or a text message from someone who is not yet in your Contacts list.
•
To delete someone from your Contacts list, first select the name,
then press Left soft key [Options] and choose Delete.
How to make and receive calls
The most basic way to make a call is to key in the number and press the Send key.
One advantage of a mobile phone is that you can also store people’s names and
numbers in your mobile Contacts and call them more easily.
To call someone:
•
P Press Right soft key to choose [Contacts]. From here use the
Up/Down keys to find the name of the person you want to call. You can also type
in the first letter of the name of the person you want to call.
•
Now simply press the green Send key.
•
End the call by pressing the red End key.
•
Make sure you are in an area with sufficient coverage to make calls.
The strength of the network signal is indicated on top left corner of screen.
How to send and receive text messages
You can use your mobile phone to send and receive text messages.
1. Go to Menu→Messaging→ New message.
2. Write your message. For more information on writing, refer to Writing text.
3. Press the Left soft key [Options] and select Send to one to send the
- 22 -
message to one person.
To send to more than one person, select Send to contacts and select the
names from the contact list.
Select Send and save to send the message and save it to Sentbox. Select
Save as draft to save it to Draftbox.
4. Enter the recipient’s phone number or select Contacts if you have
previously stored the person’s number. Then select OK to send the message.
Upon receiving a message, the mobile phone indicates with ringtone, prompt, or a
new message icon.
1. Press Left soft key [Select] to open the new message. You can also go to
Inbox to read the message.
2. Use Up/Down keys to read the message.
3. While the message is open, use Left soft key [Options] to Reply, Delete, or
Forward the message.You can also call back to the sender or extract the
sender's number.
FM Radio
With the radio, you can search for radio channels, listen to them, and save them on
your device. Note that the quality of the radio broadcast depends on the
coverage of the radio station in that particular area. The wired headset works as
an antenna, so always connect the headset when using the radio.When you
receive an incoming call while listening to the radio, the radio will be turned off.
To scan for channels, press Centre key in the broadcasting channel interface, or
select Options→Scan, and then press the Centre key to start auto searching.
To adjust the volume, press the Up/Down keys.
To tune channels manually, press the Left/Right keys.
To save the current channel, select Options→Save.
- 23 -
To view the saved channels list, select Options→Channels.
To rename the saved channels, select Channels→Options→Rename; after
renaming the channels, the stored name and the frequency will be shown on the
display.
To set the the channels manually, select Options→Set frequency; input a valid
frequency until “OK” is displayed.
- 24 -
Declaration of RoHS Compliance
To minimise the environmental impact and take more responsibility to the earth we
live in, this document shall serve as formal declaration that the ZTE A931G+
manufactured by ZTE CORPORATION is in compliance with the Directive
2002/95/EC of the European Parliament - RoHS (Restriction of Hazardous
Substances) with respect to the following substances:
(1) Lead (Pb)
(2) Mercury (Hg)
(3) Cadmium (Cd)
(4) Hexavalent Chromium (Cr (VI))
(5) Polybrominated biphenyls (PBB’s)
(6) Polybrominated diphenyl ethers (PBDE’s)
(Compliance is evidenced by written declaration from our suppliers, assuring
that any potential trace contamination levels of the substances listed above are
below the maximum level set by EU 2002/95/EC, or are exempt due to their
application.)
The ZTE A931G+ manufactured by ZTE CORPORATION, meets the requirements of EU 2002/95/EC.
- 25 -
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to
a product it means the product is covered by the European
Directive 2002/96/CE.
2. All electrical and electronic products should be disposed
of separately from the municipal waste stream via
designated collection facilities appointed by the
government or the local authorities.
3. The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and
human health.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2009:02:12 08:00:18+08:00
Create Date                     : 2009:02:12 08:00:18+08:00
Format                          : application/pdf
Title                           : Microsoft Word - Exhibit09.user_manual.doc
Creator                         : Xuezhen
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:bed48be5-a281-4271-827f-9fae3e250865
Instance ID                     : uuid:aa2ef155-34eb-4f86-af62-e33e6e0d000a
Page Count                      : 25
Author                          : Xuezhen
EXIF Metadata provided by EXIF.tools
FCC ID Filing: Q78-ZTEA931GPLUS

Navigation menu