ZTE ZTEC350 CDMA 1X Mobile Phone User Manual Q78 ZTEC350 Rev3

ZTE Corporation CDMA 1X Mobile Phone Q78 ZTEC350 Rev3

User Guide

C350 CDMA 1X Digital Mobile Phone User Manual
Copyright © 2007 by ZTE Corporation All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version: Release 1.0 Date: June 2007 Manual number:056584500373
3Declaration We, ZTE Corporation, declared that:  The product is installed with battery separately in the box. The FCC ID label is placed on the mobile phone clearly visible to all persons at the time of purchase.  The user is cautioned that changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.  This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  Do not attempt to disassemble the mobile phone and battery by yourself. Non-expert handling of the devices may damage them.  Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific
4organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age or health. The exposure standard for wireless fixed phoned employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limits set by the FCC are 1.6W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting as its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station, the lower the output power. The Highest SAR Values for this model phone when tested for use on the Right cheek were 1.15mW/g.  Some electronic devices are susceptible to electromagnetic interference sent by phone if inadequately shielded. Please use phone at least 20cm or as far as you can from TV set, radio and other automated office equipement so as to avoid interference.  For body-worn operation, this phone has been tested and meets FCC RF exposure guidelines when the handset is positioned a minimum of 15 mm from the body without any metal parts in the
5vicinity of the handset.  NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/ TV technician for help.
iContent 1 General Information....................................................... 1 1.1 Welcome....................................................................................1 1.2 Security.....................................................................................1 1.3 Safety Warnings ..............................................................2 1.4 Limit Warranty..........................................................................5 1.5 Limitation of Liability...............................................................6 2 Know Your Phone............................................................ 8 2.1 Keypad...................................................................................8 2.2 Instruction of Interface Icon....................................................11 2.3 Technical Parameters...............................................................12 2.4 Battery.....................................................................................12 2.4.1 Remove and Installation of Battery .................................12 2.4.2 Charging the Battery........................................................13 2.5 Connecting to the Network .....................................................15 2.5.1 UIM Card ........................................................................15 2.5.2 Insertion and Extraction of UIM Card.............................15 2.5.3 Power on/off Phone .........................................................16 2.5.4 PIN Code.........................................................................16 2.5.5 Connecting the Network..................................................17
ii3 Basic Operations............................................................ 18 3.1 Making a Call..........................................................................18 3.2 Answering a Call.....................................................................20 3.2.1 Handset Auto Answer......................................................20 3.2.2 Setting Any Key Answer .................................................20 3.2.4 Incoming Call Silence .....................................................21 3.3 In Conversation.......................................................................21 3.3.1 Silence in Conversation...................................................21 3.3.2 Adjusting Volume in Conversation..................................21 3.3.3 Selecting Options in Conversation ..................................21 3.4 Menu Functions ......................................................................22 4 Names............................................................................. 23 4.1 Viewing Records.....................................................................23 4.2 Finding Records......................................................................23 4.3 Adding New Entry ..................................................................24 4.4 Editing Contacts of Names......................................................26 4.5 Delete a Records .....................................................................26 4.6 Delete All Records..................................................................26 4.7 Selecting Group ......................................................................27 4.8 Setting Speed Dial...................................................................27 4.9 Viewing and Making Speed Dial.............................................28 4.10 Capacity ................................................................................28 4.11 Batch Operation ....................................................................29
iii5 Messages......................................................................... 31 5.1 Sending a New Message .........................................................31 5.2 Receiving Incoming Call while Editing Message ...................32 5.3 Reading Message ....................................................................32 5.4 Viewing OutBox .....................................................................33 5.5 Erasing Messages....................................................................33 5.5.1 Deleteing a Message........................................................33 5.5.2 Erasing All Messages ......................................................34 5.6 Reading and Setting Voice Mail...........................................34 5.6.1 Reading Voice Mail .........................................................34 5.6.2 Set Voice Mail Number ...................................................34 5.7 Message Settings.....................................................................35 5.7.1 Save Position .................................................................35 5.7.2 Auto Save ........................................................................35 5.7.3 Automatically Erasing Inbox...........................................35 5.7.4 Set Proformatted message ...............................................35 5.7.5 Messages Alert ................................................................36 5.7.6 Delivery Acknowledging.................................................36 5.7.7 Msg Priority.....................................................................36 5.7.8 Memory Status.................................................................36 6 Call History.................................................................... 38 6.1 Viewing Recent Calls..............................................................38 6.2 Erasing Recent Calls List........................................................39
iv6.3 Call Timers..............................................................................39 7 Settings........................................................................... 40 7.1 Sound......................................................................................40 7.1.1 Volume.............................................................................40 7.1.2 Ring of Incoming Call.....................................................40 7.1.3 SMS Ring........................................................................41 7.1.4 Ring of Power On/Off .....................................................41 7.1.5 Alert Type........................................................................41 7.1.6 Key Beep.........................................................................42 7.2 Display....................................................................................42 7.2.1 Wall Paper Set ..............................................................42 7.2.2 Set Backlighting ..............................................................42 7.2.3 Set Brightness..................................................................43 7.2.4 Set Contrast .....................................................................43 7.2.5 Set Language................................................................43 7.2.6 Setting Time Format........................................................43 7.2.7 Changing Banner.............................................................43 7.3 Call Settings............................................................................44 7.3.1 Setting Headset Autoanswer............................................44 7.3.2 Setting Any Key Answer .................................................44 7.3.3 Voice Privacy...................................................................44 7.3.4 Alert.................................................................................45 7.3.5. Supp. Services ................................................................45
v7.3.6 Fire Proof.........................................................................47 7.3.7 Flip Open Answer Call....................................................48 7.4 Security Settings .....................................................................48 7.4.1 Setting Phone Lock..........................................................49 7.4.2 Setting PIN Code.............................................................49 7.4.3 Restore setting.................................................................49 8 Toolkit............................................................................. 50 8.1 Calendar..................................................................................50 8.2 Alarm Clock............................................................................50 8.3 Calculator................................................................................51 8.4 Voice Memo............................................................................52 8.4.1 Recording in Normal.......................................................52 8.4.2 Recording in Conversation..............................................52 8.4.3 Recording with Incoming Call/Message..........................53 8.5 Games .....................................................................................53 8.6 Stopwatch................................................................................54 9 VAS................................................................................. 55 10 Text Input....................................................................... 56 10.1 Multitap Input .......................................................................57 10.2 Numbers Input ......................................................................57 10.3 eHiText Input .....................................................................57 10.4 Symbols Input.......................................................................58
vi11 Troubleshooting............................................................. 59
vii Explanation for Mobile Phone with/without UIM Card There are two types of ZTE CDMA Mobile phone, one need UIM card inserted and another does not need. Sections or functions in this manual are for the phone with UIM card. If your phone could be used without UIM card, please pay attention to the following items: 1. You can use your phone without inserting the UIM card. 2. Some functions are only available with UIM and won't display, such as,  You can save the new contact only in Phone, not in UIM.  You can save the new message only in Phone, not in UIM.  The message in Inbox can not be moved to UIM.  There is no PIN Lock function in Security Setting.
1 1 General Information 1.1 Welcome Thank you for choosing C350 CDMA 1X Digital Mobile Phone. To guarantee the mobile phone always in its best condition, please read this manual carefully and keep it for future use. The pictures, symbols and contents in this manual are just for your reference. They might not be completely identical with your phone. Please subject to the real object. ZTE operates a policy of continuous development and reserves the right to update and modify the technical specifications in this document at any time without prior notice. 1.2 Security  If your mobile phone is lost or stolen, please report to your service provider or agencies of banning the use of your lost UIM card and phone, which will protect you from economic losses resulted from unauthorized use. You need to provide the phone’s ESN number labeled. You can see ESN number after removing the battery. Please keep ESN number for future use.  To protect your mobile phone from illegal use, please take the
2security measures as follows:  Set PIN code of the UIM card.  Take it with you as you can. 1.3 Safety Warnings To the Owner  Some electronic devices are susceptible to electromagnetic interference sent by mobile phone if inadequately shielded, such as electronic system of vehicles. Please consult the manufacturer on the device before using the phone if necessary.  Operating of mobile phone may interfere with medical devices like hearing aides and pacemakers. Please always keep the mobile phone more than 20 centimeters away from such medical devices when the phone is powered on. Do not carry the mobile phone in the breast pocket. Power the mobile phone off if necessary. Consult a physician or the manufacturer on the medical device before using the phone.  Be aware of the usage limitation when using a mobile phone at places such as oil warehouses or chemical factories, where there are explosive gases or explosive products being processed, because even if your phone is in standby mode, it still transmits radio frequency (RF) energy. Therefore, power off your phone if required.  Pay attention to traffic safety. Do not use your mobile phone while
3driving. Park before making or answering a call.  Store the phone out of the reach of little children. The phone may cause injury if used as a toy. Mobile Phone  Please use original accessories or accessories that are authorized by the manufacturer. Using any unauthorized accessories may affect your mobile phone’s performance, and violate related national regulations about telecom terminals, or even endanger your body  If you want to clean your phone, please use clean fabric that is a bit wet or anti-static. Do not use harsh chemical cleaning solvents or strong detergents to clean it. Turn off your phone before you clean it.  As your mobile phone can produce electromagnetic field, do not place it near magnetic items such as computer disks.  Using the phone near electrical appliances such as TV, telephone, radio and personal computer can cause interference, which affects the function of the phone.  Do not expose your mobile phone to direct sunlight or store it in hot areas. High temperatures can shorten the life of electronic devices.  Prevent liquid from leaking into your phone.  Do not drop, knock or harshly treat your phone. Rough handling
4can break internal circuit boards.  Do not connect the phone with other unauthorized peripheral equipments.  Do not attempt to disassemble the mobile phone and battery by yourself. Non-expert handling of the devices may damage them.  Do not charge the mobile phone without battery.  On occasion of emergent calling, keep your phone in status of power on and in area of service. On the condition of standby, press the key to enter emergency phone number, and then press Send key to make a phone call. Battery Using  Do not short-circuit the battery, as this can cause excessive heat and fire.  Do not store battery in hot areas or dispose of it in a fire to avoid explosion.  Never use any charger or battery damaged or worn out.  Return the wear-out battery to the provider or put it in the appointed recycle place. Do not put it in familial rubbish. Warning: If the battery is broken, keep away from content. If it taints your skin, wash your skin with abundant fresh water and ask doctor for help if necessary.
5Safety and General Using in Vehicles  Before making or answering a call, you should pay attention to the local laws about using wireless mobile phones and take them into account in practical use.  Safety airbag, brake, speed control system and oil eject system shouldn’t be affected by wireless transmitting. If you do meet problems above, please contact your automobile provider.  Please power off your mobile phone when refueling your automobile, and so do the place where duplex wireless equipments are banned. Don’t put your phone together with flammable or explosive items, as inner spark may cause fire. In Aircraft  Follow the restrictions in aircraft. Wireless devices can cause interference in aircraft.  Please power off your mobile phone before taking off till landing. In order to protect airplane’s communication system from interference, it is never allowed to use mobile phone when it is in flight. Using mobile phone before the plane taking off should get aircrew’s permission according to safety regulations. 1.4 Limit Warranty The warranty does not apply to defects or errors in the product caused by:
6(a) Reasonable abrasion. (b) Misuse including mishandling, physical damage, improper installation, unauthorized disassembly of the product. (c) Water or any other liquid damage. (d) Any unauthorized repair or modification. (e) Power surges, lightning damage, fire, flood or other events outside ZTE’s reasonable control. (f) Use of the product with any unauthorized third party products such as generic chargers. (g) Any other cause beyond the range of normal usage for products. End User shall have no right to reject, return, or receive a refund for any product from ZTE under the above-mentioned situations. This warranty is end user’s sole remedy and ZTE’s sole liability for defective or nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory provisions of the law. 1.5 Limitation of Liability ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or
7in connection with using this product, whether or not ZTE had been advised, knew or should have known the possibility of such damages.
8 2 Know Your Phone 2.1 Keypad Key Tip Function Description Send key  Make or answer a call.  Press Send key in standby mode to enter all Records list.  Press Send key two times directly EarpieceLeft Select Key Right Select Key LCD ScreenSend KeyCharger/Earphone connector End Key 0～9 Number KeyMicrophone4 Way scroll key
9to redial the last number. End key  End an active call or reject a call.  Power on/power off.  Exit from any interface to standby mode. Left select key  Enter main menu in standby mode.  Switch to the options of left bottom submenu. Right select key  Enter Names in standby mode.  Switch to the options of right bottom submenu. OK key  Confirm the commands and options selected.  Confirm the character chosen while character inputting.  Enter MobileShop menu in standby mode Up/Down key(Scroll key)  Scroll the cursor up and down.  Used as selection key up and down for keying in commands and selecting options shown on the display.  In standby mode, hold Up key to
10set Silence All; Press Down key to enter Ring menu.  Press Up key to enter Messages menu.  Used as direction key in games Left/Right key(Scroll key)  Scroll the cursor left and right.  Used as selection key to scroll cursor left and right for keying in commands and selecting options shown on the display.  In standby mode, press Left key to enter Toolkit, press Right key to enter Games menu.  Adjust volume in conversation.  Used as direction key in games. ~ 0~9 Number key  Key in numbers or characters.  Make a Speed Dial call.  Hold 0 Key to input + in standby mode. *key，#key # key:  Press # key to select text input mode. * key:  Hold * key in standby mode to
11enable/disable vibration.  In text mode, press * key once to enter Symbols mode, press * key twice to enter template message. Note: To “press” the key in this manual means to press the key and release it. To “hold” the key means to keep pressing the key for two seconds or more. 2.2 Instruction of Interface Icon Icon Indication Signal strength Roaming New voice message New message New urgent message Ringer with vibration Vibration Earphone Silence All Alarm Power indicator
122.3 Technical Parameters Handset Type ZTE C350 Dimensions （Width×Height×Thickness） 46mm×90mm×16mm Weight About 75g(Battery Included) Battery Continuous standby time About 80h～160h (Subject to Network) Continuous talk time About 2h～4h (Subject to Network) Note: Please refer to the real phone for other relative parameters of the battery and charger. 2.4 Battery The attached Li-ion battery along with the phone can be used after unpacking. For the first three times, please use up the power and charge it fully for a new battery to perform well. 2.4.1 Remove and Installation of Battery  Remove：(1) Press and push the back-cover of the phone down to release and remove it off the phone. (2) Put finger on the side finger grips, and then lift up the battery from the finger grips to remove the battery.
13  Installation：(1) Replace the battery into the battery slot, to be noted that the lower end of the battery firstly inserted. (2) Put the back-cover of the phone flatly upon the body of phone. Direct the back cover towards the locking catches on the both sides of the phone and push the back-cover of the phone upward to lock the cover into its place. 2.4.2 Charging the Battery  Plug out rubber away (turn 180° as shown in the picture) from the jack on the bottom of the handset and connect the lead from
14the charger to the socket on the bottom of the phone. (Note: The side with arrow should be upright while connecting).  Connect the charger to a standard wall AC socket.  Meanwhile, the charging indicator in up-right corner of the display flops cyclically, indicating the charging is going. In power-off mode while charging, the display only shows the charge indicator. If the battery is completely flat in storage or used up, it may take for a while before the charging indicator appears on the display or any calls can be made.  When the charging indicator on the screen stops flopping, the charging is completed. The charging takes usually up to 2～3 hours. In the process of charging, it is a normal phenomenon that the battery, phone and charger get into hot accordingly.  After the completion of charging, disconnect the charger from the phone and AC socket. Note：  When it is in charge, place the phone on condition of good ventilation and temperature between -5℃～＋45℃. Ensure to use the charger offered by the manufacturer. Using unauthorized charger may cause danger and violate the authorization of the phone and the guarantee article.  When the phone is automatically switched off or indicates the alarm information of power shortage, please charge the battery in time.
15 The duration time of the standby status or conversation of the phone is based on ideal working environment. In practice, the working time of battery varies with network condition, working environment and application methods. 2.5 Connecting to the Network 2.5.1 UIM Card Before using the phone, please insert effective UIM (User Identity Module) card into the phone. All the information related to the network connection is recorded in the metal plane area of UIM card together with the information you stored in your Contacts in the UIM card. The UIM card can be inserted into any CDMA phone to use (new phone automatically reads UIM card). Please do not touch the metal plane area of the card to avoid missing and damaging information in the card and put UIM card in place far away from electricity and magnetism. Warning：Please power off the phone before taking out UIM card. It is prohibited to insert or taking out UIM card in the condition of connecting with external power. 2.5.2 Insertion and Extraction of UIM Card Power off the phone, remove the battery and other external power. Insert UIM card into UIM card slot in the phone，or pull out UIM card out
16of slot, as shown in picture hereinafter. 2.5.3 Power on/off Phone Press and hold End key to power on/off the phone.The phone will check whether UIM card inserted well or not. And then follow the prompt indication on the display: Enter PIN——Key in PIN code of UIM card if it is set. Searching——Search appropriate network connected. 2.5.4 PIN Code To set PIN code (personal identification number) is to avoid the illegal usage of UIM card. To input PIN code of UIM card and press OK key to confirm to start on using phone. If inputting wrong PIN three times continuously, UIM card will be locked by network. Note：The network provider offers you PIN code (four to eight digits). You should change PIN code as soon as possible for security. To set PIN code, see “7.4 Security Settings”.
172.5.5 Connecting the Network After powering on and inputting PIN code, the phone automatically searches the network available and in state of standby mode. Besides sending and receiving calls, you can also do:  Press Left select key to enter Main menu.  Press Right select key to enter Names menu.  Hold * key to enable/disable vibration mode.  Hold Up key to set the phone in Silence All.  Press Up key to enter Messages menu.  Press Left key to enter Toolkit menu.  Press Right key to enter Games manu.  Press Send key to enter All Calls list.  Press OK Key to enter MobileShop
18 3 Basic Operations 3.1 Making a Call Please ensure that you are in the place where the signal can be received. Examine network signal strength icon on the screen. The more the indication bars, the stronger the intensity of receiving signal is. If there is no bar, please move to the place where the intensity of receiving signal is better. Sometimes, you only need to change the direction.  Making a National Call Press Number key to key in phone number, and add area code when making a long distance call (no need to add area code when dialing local number in some area). Press Send key to call out. Press End key to end the call and conversation.  Making an International Call Enter the country code, area code (without the leading 0) and the complete telephone number you want to dial, press Send key to call out.
19Before the country code, hold 0 key to enter the international prefix “+” (the character “+” replaces the international access code) or key in international prefix e.g. “00” of international call directly.  Making Recent Calls All calls you recently dialed, received or missed are saved in your phone. All numbers are grouped as Missed Calls, Incoming Calls and Outgoing Calls. When the list is full, the oldest number will be erased automatically when new record is coming. You can check the list as follows:  In standby mode, press Send key to view All Recent Calls.  The number listed in can be directly dialed by pressing Send key.  Making Pause Calls You can make use of pause call to dial an extention or voice service call. E.g. Key in phone number, press OK key to select “P” on the display (character “P” added accordingly), and then key in number afterwards. Press Send key to dial the first number, when connected, press Send key again to dial the second number automatically. “P” can Country code + Area code + Telephone number 0086 755 26770000
20be used for not once only. 3.2 Answering a Call When a call is incoming in standby mode, the phone will offer corresponding ringer or vibration to prompt according to your settings. With the number already saved in Names, the phone also shows the name of caller meanwhile. • Press Send key to answer an incoming call. • Press End key to end a call and the call duration is temporarily displayed. See “7.3 Call Setting” or refer to other ways of answering calls for your option as follows. 3.2.1 Handset Auto Answer You can set handset to answer an incoming call automaticlly. • Select Menu→ Settings→ Call Setting→Auto Answer • Select On/Off, and press OK key. The phone can be connected in 5 seconds. 3.2.2 Setting Any Key Answer • Select Menu→ Settings→ Call Setting→ One-Touch. • Select On/Off, and press OK key. An incoming call can be answered by pressing any key except End key, Left /Right select key.
213.2.4 Incoming Call Silence • When a call is coming, press Right select key to select Mute the ringer tone. • This function silences the current incoming call only. The phone will ring normally as next call coming. 3.3 In Conversation 3.3.1 Silence in Conversation During conversation, you can press left select key to select Option (Names, Messages or Record) or press right select key to choose Mute displayed. Select Mute to let the other party temporarily not hear your voice; Select Unmute back to normal. You can also enter Contacts, Messages or Record during a conversation. 3.3.2 Adjusting Volume in Conversation Press Left/Right key to adjust volume of Earpiece during a call. 3.3.3 Selecting Options in Conversation During a call, press Left/Right select key to select options of Option (Names, Messages or record), Mute/Unmute,etc.  Select Mute/Unmute to let the other party temporarily can or can not hear your voice;  Select Option for selection in Menu, such as Names, Messages or record, with no worry about the ending of
22conversation. 3.4 Menu Functions  Main Menu Function: i. In standby mode, press Left select key to enter main Menu. Scroll Up/Down or Left/Right key through the menu and select functions according to the prompt on the screen. ii. If the menu contains submenus and further submenus, select options and submenu you want according to the prompt on the screen. iii. Press OK key or Right Select Key to set or return to the previous menu. Press End key to exit to standby mode.  Bottom Menu Function: If options are displayed on the bottom of the screen, press Left/Right select key to select. Press OK key or Right select key to set or exit. The functions of phone are mainly grouped in main Menu: Names, Messages, Call History, Settings, ToolKit and VAS. Please refer to the text hereinafter in this manual in detail.
23 4 Names You can save contacts in phone and UIM card. Each contact in phone’s memory has three phone numbers，home number, mobile number and work number, and each contact in UIM card only has one phone number. Select Option → Other options →Capacity to view memory of phone and UIM card. 4.1 Viewing Records Select Menu→ Names. You can view the corresponding records in all list. Scroll to the name you are finding, and press OK Key, you can see the details of the name. Note: When there is no storage record in Contacts, it will indicate “No Item”. 4.2 Finding Records You can search for a name in Names in pop-up window by choosing:  In All
241. Select Menu → Names. 2. Press Up/Down key to scroll though the corresponding name(s) and records in the list. Scroll to the record you are finding, and press OK key to view the details.  Search 1. Select Menu → Names. 2. Select one contact record and choose Search in Option. You can key in the first characters of the name you are searching for to view contact directly in All List. 3. Press Up/Down key to scroll though the corresponding name(s) and records in the list. Scroll to the name you want, and press OK key to view the details or select Option.  In Standby Mode: To quickly find phone number in Names in standby mode, press Right select key to scroll to the name you want. All the contacts will be list by the letter of the name. If no contact in the list, “No Item” will be displayed. 4.3 Adding New Entry 1. Select Menu→ Names. 2. Select one contact record and choose Add New Entry in Option. 3. Select the position of would-be added information: Phone, UIM 4. If you choose in Phone, press Up/Down key to write the
25information of Name/Group/Home Number/Mobile Number/work Number, if you choose in UIM, press Up/Down key to write the information of Name/number, See “10 Text Input ” more instructions for writing text and character. 5. After the completion of writing, press OK key to save the contact. 6. Scroll to the just-added phone number to reedit, press OK key or select Option. Further operation can be executed, such as:  Edit: Edit the number.  Delete: Delete the number.  Make a call: Make a call to this number.  Send Message: Send message to this number.  Copy to Phone/UIM: Copy the contact to Phone/UIM.  Move to Phone/UIM: Move the contact to Phone/UIM.  Set Speed Dial: Assign a speed dial number to the phone number. (When the contacts saved in UIM, there is no this function.) Note: In standby mode, key in phone number, press Left select key to save. If you save the same number again, the phone prompts to remind you this number is already exist.
264.4 Editing Contacts of Names 1. Select Menu→ Names. 2 Scroll to the record you want to edit or Search in Option to search for would-be edit record. 3. Select Option to Edit name, group, phone number and press OK key. 4. Scroll to the Name, Group, Home Number, Mobile number Work Number, to make modification. 5. Press Right select key to erase character of the current, and rewrite the new. 6. Select Save, “Succeed to save”appears on the display. 4.5 Delete a Records 1. Select Menu → Names. 2. Scroll to the record you want to erase or Search in Option to search for would-be erased record. 3 Select Option to delete contact, and press OK key. “Confirm to delete?” indicated on the display. 4. Press OK key to make delete. 4.6 Delete All Records You can Delete All the records in Names. Or see “7.4 Security Settings” for the details of other ways of erasing.
274.7 Selecting Group There is three groups, family, friend and colleague preset in you phone, you can rename them and set ringer for the different group. 1. Select Menu→ Name. 2. Select one record listed in phone’s memory, and press Left select key or OK key. 3. Select Edit Group from Option. 4. Scroll to the Group you wantd edit, family, friend or colleague. Further operation can be executed, such as:  Edit Group Name: prees OK and you can rename the name of group.  Select Ringer. Set the personal ringer for the group. You can select ring from the list set already in phone or download ring by yourself. 4.8 Setting Speed Dial 1. Select Menu→ Names. 2. Select one contact record listed in phone’s memory, press OK key or choose View details in Option. 3. Scroll to the number you select and choose Set speed dial in Option. 4. Press OK key/Left select key and select an Empty slot in list. 5. Press Right select key.
284.9 Viewing and Making Speed Dial Viewing： Select Menu→ Names. Select one contact record and choose Options, Other options, View speed dial list. Dialing： You can also make a call by entering speed dial number in the standby mode. Method 1: Enter speed dial number, press Send Key to dial. Method 2: Directly hold the Speed Dial Number digit key. If the Speed Dial Number is one-digit, directly hold the digit key. If the Speed Dial Number is two-digit, press first digit key and then hold the second one. For example: If the Speed Dial Number is 25, you should press 2 key firstly, and then hold 5 key, thus it can dial directly. Note: Some handset may not support method 1. Some handset support only one-digit speed dial number, some support both one-digit and two-digit speed dial number. 4.10 Capacity 1. Select Menu→Names. 2. Select one contact record and choose Options, Other options, Capacity. 3. View the number of saved entries and maximum number of
29entries saved in phone and UIM card. For example: phone: 8/500, UIM Card: 4/500, indicating that 500 records entries in Max., out of which eight have be saved in phone. And 500 entries in Max., out of which four have been saved in UIM Card. Please consult with service supplier for storage capacity of UIM card. 4.11 Batch Operation 1. Select Menu→ Contacts. 2. Select one contact record and choose Options, Other options, Batch operation to copy, move contact in (between) phone’s memory or SIM card.  Copy Phone To UIM: Copy all contacts of the phone’s memory to UIM card Note: This function can copy all the contact records to UIM card, and all the different records or numbers under the same name will be copied accordingly to UIM card one by one as different records.  Copy UIM To Phone : Copy all contacts in UIM card to the phone’ memory. Note: This function can copy all the contact records to the phone’s memory, and all the different records with same name will be copied accordingly to the phone’s memory. 3. Move all contacts as follows:  Move Phone To UIM: Move all contacts of the phone’s memory to UIM card
30Note: This function can move all the contact records to UIM card, and all the different records or numbers under the same name will be copied accordingly to UIM card one by one as different records.  Move UIM To Phone: Copy all contacts in UIM card to the phone’ memory. Note: This function can copy all the contact records to the phone’s memory, and all the different records with same name will be copied accordingly to the phone’s memory.
315 Messages This is introduction of how to send, receive and erase the messages in your phone. Note：The function introduced hereinafter may differ with different service offered in your area. Please consult with your service provider for more detailed information. 5.1 Sending a New Message Please consult with the service provider to support the network service of sending message. You can only send message to the mobile phone which can receive message. 1. Select Menu→ Messages→ New SMS. 2. Write message text. See “10. Text Input” more instructions for writing text and character.. 3. Press OK key/ Left Select key to - Send message: Send message. - Save: Save the message in OutBox. 4. Input the recipients’ Phone Number, or select phone number from Names. Hold # key to input “;”, you can input the multi-receivers’
32phone number or select phone number directly from Names to sent the message to multi receivers. 5. Press OK Key to send or save the message. Note: The SMS centers of some cities and regions do not support messages longer than 160 characters. 5.2 Receiving Incoming Call while Editing Message • If you do not want to receive the incoming call, press End key. • If you want to receive the incoming call, press Send key. After receiving the call, you can continue to edit and send the message. 5.3 Reading Message On receipt of a new message, the phone prompts you by vibration or ringer (up to silence and ringer in Settings). The display indicates “MESSAGE!” and press OK key to View. Erase old messages to keep space for new messages. 1.Select Menu→ Messages→ Inbox. 2. Scroll to the message you want to read. 3. Press OK key to read message. You can also press Up/Down key to scroll. 4. After reading, press Left select key to select: －Reply： Reply message to sender －Forward： Forward the message to other recipients. －Delete：Erase this message. －Voice Call：Call back to sender.
33－Extract ：Save sender’s number to contacts, select Phone to save the sender’s number in Phone and select UIM save the sender’s number in UIM Card. －Copy to UIM/Phone：Copy the message to UIM card or Phone. 5.4 Viewing OutBox 1. Select Menu→ Messages→ OutBox. 2. Scroll Message List. 3. Press OK key to read message. 4. Select Right Select Key to return to the list. Select OK Key to Forward, Delete, Send the message. 5.5 Erasing Messages Delete and erase old messages to release space for phone’s SMS memory. You can select erasing messages when sending or reading messages; erase messages one by one or all in Inbox, Outbox. 5.5.1 Deleteing a Message 1. Select Menu→ Messages. 2. Select messages location: Inbox, Outbox. 3. Press Up/down key to select to-be-erased messages. 4. Select Left select key to delete messages. “Delete?” appears. 5. Select OK key/Left select key to Delete this message.
345.5.2 Erasing All Messages 1. Select Menu→ Messages . 2. Select to-be-erased messages in Inbox or Outbox. 3. Press Left select key to Delete all the message(s) in Inbox or Outbox. “Delete all?” appears. 5. Select OK key/Left select key to delete all messages in Inbox or Outbox. 5.6 Reading and Setting Voice Mail 5.6.1 Reading Voice Mail Before using Voice Mailbox, please consult with network provider to confirm that the function of voice mail box has been activated. After your successful setting, network will automatically transfer divert incoming call(s) to your voice mail box, and send message(s) to your phone. Select Menu→ Message→Voice mail→Call Voicemail to dial voice mail box number to listen to the leaving message following guide prompt. Note: The function needs network support. 5.6.2 Set Voice Mail Number Select Menu→ Message→Voice mail→Setting No. . 2. Set Voice Mail Number.
355.7 Message Settings You can set your message box before you use it. 5.7.1 Save Position 1. Select Menu→ Messages→ Msg Settings→Save Position. 2. Select UIM or Phone and press OK key to save message in UIM card or phone. 5.7.2 Auto Save 1. Select Menu→ Messages→Msg Settings→Auto Save. 2. Select On or Off for your phone can or can not automatically save senting message. 5.7.3 Automatically Erasing Inbox Set erasing the last read message in Inbox automatically when Inbox is full. 1. Select Menu→ Messages→Msg Settings→Auto Delete. 2. Select On or Off and press OK key/Left select key. 5.7.4 Set Proformatted message The phone has a group of some common built-in phrases and sentences, such as, “Please call me immediately”, “I am busy now, call you later.” etc. 1. Select Menu→ Messages→ Msg Settings→Set Idiom. 2. Scroll to the message you want to send and press OK key.
363. Select Edit to edit the message , see “5.1 Sending a new message” in detail. Select Send to send the message. Note: in text input, press * key twice to enter Set Idiom. 5.7.5 Messages Alert 1. Select Menu→ Messages→ Msg Settings→ Alert Setting. 2. Select the mode of alert as Once or Cyclic when receive a message. 5.7.6 Delivery Acknowledging 1. Select Menu→ Messages→Msg Settings→ Delivery Ack. 2. Select On or Off for your phone can or can not automatically receive message from network informing you whether you have sent message successfully. 5.7.7 Msg Priority 1. Select Menu→ Messages→ Msg Settings→Msg Priority. 2. Select Normal, Interactive, Urgent, Emergency for sending message. 5.7.8 Memory Status Select Menu→ Messages→Msg Settings→Memory Status. View the number of saved messages and maximum number of messages saved in phone and UIM card . For example: Phone: 8/200, indicating that 200 records entries in
37Max., out of which 8 have be saved in phone. UIM: 4/100 And 100 entries in Max., out of which 4 have been saved in UIM Card. Please consult with service supplier for storage capacity of UIM card.
38 6 Call History 6.1 Viewing Recent Calls Information of All Calls, Received Calls, Dialed Calls, Missed Calls, including name, phone number, and call time and coversation duration is saved in the Call History. 1. Select Menu→Call History. 2. Select All Calls, Missed Calls, Received Calls, Dialed Calls. 3. Press OK key. 4. Select one entry of the records and press OK key. 5. Select option: - Call Information：Indicate number and conversation duration informations. - Save：Save the number in mobile phone’s Names. - Delete：Delete the number from the list of Call History. - Clear all: Delete all numbers from the list of All Calls, Received Calls, Dialed Calls or Missed Calls.
39- Call the number：Dial this number. - SMS：Send message to this number. - Black List：Add this number to the Black List. If the UIM Card does not support the function of Incoming Call Indication, you can only see part of the above-mentioned options. 6.2 Erasing Recent Calls List 1. Select Menu→Call History→Clear all. 2. Press OK key to delete all the numbers from the list of Call History. 6.3 Call Timers Your phone can record the talk time of dialing and receiving call. 1. Select Menu→ Call History→ Call timers. 2. Select an option from the list and press OK Key. －Outgoing Calls：Indicate the talk time of all dialed call. The timer can be reset. －Incoming Calls：Indicate the talk time of all received call. The timer can be reset. －All Calls：Indicate the talk time of all dialed and received call. The timer can be reset.
407 Settings Your phone has different functions in Settings to meet your requirement. They are: Sound , Display, Call Setting, Security . 7.1 Sound 7.1.1 Volume You can adjust the volume of Ringer, earpiece and key beep. 1. Select Menu→ Settings→ Sound→ Volume. 2.Select Ringer Volume (When earphone is inserted, it is earphone Ringer), Earpiece Volume or Key Beep Volume. 3. Press Left/ Right key to adjust volume. Press OK key. 7.1.2 Ring of Incoming Call ZTEC350 offers various Ringers of incoming call for your selection. 1. Select Menu→ Settings→ Sound→ Ring → Ring Type. 2. Press Up/Down key to scroll to your selection in Preset Ring, DownLoad Ring, or Record Ring, press OK key.
417.1.3 SMS Ring You have a choice of various ringing tones for message in phone. 1. Select Menu→ Setting→ Sound→Ring→ SMS Ring. 2. Press Up/Down key to scroll to select and press OK key. 7.1.4 Ring of Power On/Off You can make a choice of various ringing tones when power on/off the phone. 1. Select Menu→ Setting→ Sound→Ring. 2. Select Power On Ring or Power Off Ring and set the phone in Silence or ring when you power on/off the phone. 7.1.5 Alert Type You can select alert type for an incoming call, earpiece and message. 1. Select Menu→ Setting→ Sound→ Alert type. 2. Select an option in list： －Vibra + Ringer：Set mobile phone in ten-second vibration case, then continuous Ringer later to prompt incoming call. －Ringer： Set Mobile phone in Ringer case to prompt. －Vibrate： Set mobile phone in vibration case to prompt. －Silence All： Set mobile phone in silence case with backlighting to prompt. Note: Type of “Vibra + Ringer” for message is as same as type of
42“Vibrate”. 7.1.6 Key Beep Set phone beep sound or not when you press keys. 1. Select Menu→ Settings→ Sound→ Key Beep. 2. Select an option: －Off： Not utter sound when press keys －Standard： Utter a fixed- length DTMF tone in short when press keys. －Long： Utter DTMF tone even longer when press keys 7.2 Display 7.2.1 Wall Paper Set You can select different wall papers as background in idle state. 1.Select Menu→ Settings→ Display→Wall Paper. 2. Press Up/Down Key to select Preset Wallpaper or Download Wallpaper. 3. Press Up/Down Key to scroll the list and press OK key/Left Select Key to confirm. 7.2.2 Set Backlighting During a call or pressing keys, the display lights on. You can set lighting duration and type. 1. Select Menu→ Settings→ Display→Backlight.
432. Select an option in pop-up window: －10 Sec：Keep backlighting for 10 seconds after last pressing. －30 Sec：Keep backlighting for 30 seconds after last pressing. 3. Press OK key to confirm. Note：In conversation, backlighting consumes the power quickly and shortens continues conversation and standby time. 7.2.3 Set Brightness 1. Select Menu→ Settings→ Display→ Brightness 2. Press Left/Right key to adjust brightness, and press OK 7.2.4 Set Contrast 1. Select Menu→ Settings→ Display→ Contrast 2. Press Left/Right key to adjust contrast, and press OK 7.2.5 Set Language 1. Select Menu→ Settings→ Display→Language. 2. Select English as the language, and press OK key. 7.2.6 Setting Time Format 1. Select Menu→ Settings→Display→ Time Format. 2. Select AM/PM or 24 HR, and press OK key 7.2.7 Changing Banner View and edit phone’s greeting to which appears on the display to
44your own. 1. Select Menu→ Settings→Display→ Banner. 2. Press OK key to Edit. 3. Key in character(s) and press Right Select key to erase character(s). 4. Press OK key twice to Save. 7.3 Call Settings 7.3.1 Setting Headset Autoanswer When mobile phone connects with earpiece (buy separately), you can set earpiece to answer automatically incoming call. 1. Select Menu→ Settings→Call Setting→ Auto Answer. 2. Select On/Off to activate or deactivate automatic answering. 3. Press Left select key or OK key. 7.3.2 Setting Any Key Answer • Select Menu→ Settings→ Call Setting→ One-Touch. • Select On/Off, and press OK key. An incoming call can be answered by pressing any key except End key, Left /Right select key. 7.3.3 Voice Privacy 1.Select Menu→ Settings→ Call Setting→Voice Privacy 2. Select Enhanced or Standard to set voice encryption in
45Standard or set voice encryption Enhanced. 3. Press OK Key/Left Select Key. 7.3.4 Alert You can select On or Off to set the alert. 1. Select Menu→ Settings→Call Setting→ Alert. 2. Select an option on display and press OK key. －Service：When there are service available. －Remind Minute：During a call, ten seconds ahead of every minute, alert. －Missed Call： When there are missed calls, alert. －Roaming： When roam in active and handoff between service areas or states occurs, alert. For the function mentioned above, select On to operate; select Off to cancel alert. 7.3.5. Supp. Services When network supports Call Setting, you can use network services of call waiting and call forwarding. Note：All these functions are network services. Please consult with network service provider to get corresponding service application.  Call Waiting During a call, use Call Waiting to answer the waiting call prompted by the network; Or dial another call meanwhile putting the first call on hold. These calls can be shifted while you have calls in conversation.
46 Call Waiting lets you enjoy three-party conversation without missing call. 1. Select Menu→ Settings→ Call Setting→ Supp.Services→ Call Waiting. 2. Select Option: - Enable: To activate the Call Waiting function. The network will notify you of an incoming call while you have a call in progress. You can press Send key to get through the waiting call and switch one call to another. - Disable: To cancel the Call Waiting function.  Call Forwarding Use Call Forwarding to forward the incoming call to a designated phone number. After setting of call forwarding, phone will automatically dial network to set the function in active. 1. Select Menu→ Settings→ Call Setting→ Supp.Services→ Call Forwarding. 2. Set type of Call Forwarding, press OK key. －All: All is diverted Immediately in all conditions. －Busy(Divert when busy): When the phone is busy, divert. －No Answer(Divert when no answer): When there is no answer, divert. 3. Select Enabled to: Enter Number to which the phone will forward and press Left select key/OK key. E.g. To forward incoming call to 12345678,
47input: 12345678, press Left select key/OK key. 4. Select Disabled to disable Call Forwarding function. 7.3.6 Fire Proof You can set Incoming calls bar in Fire Proof submenu including Friend List, Black List, Current Settings.  Friend List All the contacts will be listed by the letter of the name. 1. Select Menu→ Settings→Call Settings→Fire Proof→Friend List. 2. Press OK key and select options:  Add: Add new contact in Friend List.  Edit: Edit this contact in Friend List.  Delete: Delete this contact in Friend List.  Clear all: Delete all the contacts in Friend List. If there is no contact in the list, “List Empty” will be displayed.  Black List All the contacts will be listed by the letter of the name. 1. Select Menu→ Settings→Call Settings→Fire Proof→Black List. 2. Press OK key and select options:  Add: Add another new contact in Black List.  Edit: Edit this contact in Black List.  Delete: Delete this contact in Black List.
48 Clear all: Delete all the contacts in Black List. If there is no contact in the list, “List Empty” will be displayed  Current Settings You can set barring applications as follows:  Bar All: Bar all incoming calls.  Bar Black List: Only bar numbers listed in Black List.  Bar All Except Friend List: Only numbers listed in Friend List are not blocked.  Cancel All: Cancel barring setting. 7.3.7 Flip Open Answer Call 1.Select Menu→ Settings→Call Setting→Flip Open Answer Call. 2.Select On or Off and press OK Key to set answer the call by open flip. 7.4 Security Settings Introduction to phone’s security options preventing others to avoid illegal use or acquire your phone’s personal information. Please input right phone Password and PIN code to enter. Note：Consecutive inputting wrong PIN code for several times can cause locking of UIM Card. To unlock, you need PUK. PIN code and PUK Code may be offered together with the UIM Card. If not, please contact with network operator. The default phone password is 0000, the default PIN code is 1234, please change it to your own PIN code and phone password as soon as possible.
497.4.1 Setting Phone Lock 1. Select Menu→ Settings→ Security. 2. Input your phone password, press OK key. 3. Move to Handset Lock, set On,Off or Change Lock, press OK key. 7.4.2 Setting PIN Code 1. Select Menu→ Settings→ Security. 2. Input your phone password, press OK key. 3. Move to PIN Lock, set On,Off or Change Lock, press Left select key or OK key. 7.4.3 Restore setting Your phone offers factory default phone setting. You may modify some options when you use phone. You can also Restore Factory Default to renew some modified options to the origin. 1. Select Menu→ Settings→ Security. 2. Input your phone password, press OK key. 3. Select Restore Settings. 4. Select Ok to revert to confirm resetting or restoring factory default or select Cancel to exit. Note： Restoring the phone do not influence your phone password, PIN code, Recent Calls, Contacts, InBox and OutBox. Some setting, e.g. alarm, cannot be restored.
50 8 Toolkit Toolkit offers two games: Brick Attack and Push Box, as well as tools, such as,Calendar, Alarm clock, Calculator, Voice Memo, stopwatch, Games. 8.1 Calendar 1. Select Menu→Toolkit→ Calendar. 2. Press Left/Right key or Up/Down key to select exact date you want to view in pop-up calendar window. Press OK key. 3. Scroll Up/Down key to select options. 8.2 Alarm Clock Set alarm alert at a certain time. Alarm alerts only when the phone is in power on. 1. Select Menu→Toolkit → Alarm clock. 2. Select Set alarm to set, and press OK key. Select Alarms List to view the settings. Select Set rest day to set the date of alarm.
51Select Delete all to delete all settings. 3. When alarm rings, select OFF to stop alarming. 8.3 Calculator Use calculator to execute basic math calculation. 1. Select Menu→Toolkit→ Calculator. 2. Key in digits. Press Left/Right key or Up/Down key to choose “+”“-”“x”“/”according to the prompt. Press # key to input decimal point, and press * key to change digit to positive number or negative. Press OK key to display the result. ÷ Division Sign - Subtraction Sign = Equal Sign + Plus Sign x Multiply Sign . Decimal Point ± Change digit to positive number or negative Press Right Select key to erase digit one by one and exit to previous window, press Left Select key to erase all digits and reset, press End key to exit to standby mode. Note：This calculator has a limited accuracy and is designed for simple calculations.
528.4 Voice Memo ZTEX350 supports Voice Memo function either in or not in conversation with a capacity of saving 5 pcs records in max. When there is no space in Voice Memo or Voice Memo is full, the phone prompts. 8.4.1 Recording in Normal 1. Select Menu→ToolKit→ Voice Memo. 2. Scroll Up/Down key to select:  Record – When you are not in conversation, select Start to begin a new Recording, or Stop/ Pause recording.  Record List – Play or Delete the record listed and named by date and time, Back to previous pop-up menu. Note: The record saved in normal will be listed in Settings→ Sound→ Ring →Ring Type as a kind of ringer tone.You can select it or not as you like as ring of the phone. The record can not be deleted as if it is activated as the ringer, unless you cancel the record as the ring of the phone. 8.4.2 Recording in Conversation When you are in conversation, select Record to pop-up window of Voice Memo and select Start to begin a new Recording, or Stop, Pause/Resume recording, without ending the call.
53The phone exits back to the calling interface when the recording is finished. The record will be saved automatically when the call is ended without finishing recording, and exit back to interface of ending call. 8.4.3 Recording with Incoming Call/Message  With Incoming Call While recording in state of non-conversation, receive a call will stop recording. The record of phone will be saved automatically and return to call interface.  With Message While recording in state of non-conversation, receive a message won’t stop recording. The phone prompts message alert without display message interface.  With Others - Alarm: Prompts later. - Alert: Prompts later. -Power off automatically while recording. Save record automatically. Note: In state of non-conversation, record voice via MIC; In state of conversation, record voice via earpiece. 8.5 Games 8.5.1 Brick attack After the screen appears greeting, it will indicate play guide.
54 You can select New Game to start a new game or Continue for continuing the last game. Make use of the Left/Right key to play the game. 8.5.2 Push Box After the greeting, phone indicates play guide. You can select New Game to begin a new game or Continue for continuing the last game. Make use of the Number key and Scroll key to play the game. 8.6 Stopwatch 1. Select Menu→Toolkit→ Stopwatch. 2. Select Start to make stopwatch timing. 3. Select Stop to stop timing. 4. Select Reset to clear the time record.
559 VAS This function needs network support by service provider. If your UIM card can also support, menu of VAS appears on the display. If UIM Card and network provider don’t support, the function is invalid. The application of this function may ask for extra fee. Please contact with network provider to acquire more information.
5610 Text Input Your phone offers text input modes: Multitap Input (Abc/ABC), Numbers Input (123), eHiText Input (eng), and Symbol Input (Symbols). Input mode includes capital letter and lowercase mode. You can key in letters, digits, characters and symbols when writing text or editing contact record information in Names or Messages etc., following the common instruction in hereinafter table. Operation Method Input Letters Multitap (Abc/ABC) Input—“Abc/ABC”, press corresponding letter key till the letter appears. Input Words eHiText Input—“eng”, press any key once to key in any word. Input Digits Numbers Input—“123”, press digit key once. Input Symbol Symbols Input —Press * key to enter the symbols mode and press corresponding digit key. Or press “1” key till the symbol (common symbols) appears except for Numbers Input mode..
57Input Space Press “0” key, except for being in numbers mode. Erase Character Press Right select key . Move cursor left or right Press Left/Right key . Change input modePress # key to select another text mode. Capitalization Press# key to switch between capitalization and lowercase. 10.1 Multitap Input Select Multitap Input (Abc/ABC) — Each key stands for multiple letters. Press key till your letter appears. When the cursor moves, enter the next letter. 10.2 Numbers Input Select Numbers Input (123) — Press the corresponding key once to input the number. In Numbers input mode, you can not enter space. 10.3 eHiText Input Select eHiText Input (eng) — Predictive word input is based on a built-in dictionary. One letter asks for pressing only once.
58Press the digit key corresponding to the letters once till the word appears on the screen. If the word displayed is not the word you want, press Up/Down key to look for another matching word. Then press OK key to confirm. 10.4 Symbols Input -Press 1 key to input till the symbol appears. Most common punctuation marks and special characters are available. Or select Symbols mode by pressing * key : - Press Up/Down key to page down. And press digit key to enter corresponding symbol. Note: in text input, press * key twice will enter set Idiom menu.
59 11 Troubleshooting If your phone appears following phenomenon in the process of application, please read following relative information at first. If the problems still can not be solved, please contact with the distributor or service provider. Problem Check Point When switching on the phone, it prompts “Enter PIN”. Please input your PIN Code which offered with UIM Card together. If you have changed PIN code, please input new PIN Code. You can also set PIN code deactivated, see “7.4 Security Settings”. When switching on the phone, it prompts “Insert card and restart phone”. Please check whether valid UIM card is inserted or not. No key beep on pressing keys. Please check the setting of Key Beep in Settings. When there is an incoming call, the prompt ringer not rings. Please check the setting of sound Alert Type and ringer Volume in Settings.
60No prompt tone at alarm time. Please check relative sound setting (Alert Type and ringer Volume in Settings). Messages cannot be sent. Please check the signal of network.

Navigation menu