ZTE ZTEC350 CDMA 1X Mobile Phone User Manual Q78 ZTEC350 Rev3
ZTE Corporation CDMA 1X Mobile Phone Q78 ZTEC350 Rev3
ZTE >
User Guide
C350
CDMA 1X Digital Mobile Phone
User Manual
Copyright © 2007 by ZTE Corporation
All rights reserved.
No part of this publication may be excerpted, reproduced, translated
or utilized in any form or by any means, electronic or mechanical,
including photocopying and microfilm, without the prior written
permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right
to make modifications on print errors or update specifications without
prior notice.
Version: Release 1.0
Date: June 2007
Manual number:056584500373
3
Declaration
We, ZTE Corporation, declared that:
The product is installed with battery separately in the box. The
FCC ID label is placed on the mobile phone clearly visible to all
persons at the time of purchase.
The user is cautioned that changes or modifications not expressly
approved by the manufacturer could void the user’s authority to
operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Do not attempt to disassemble the mobile phone and battery by
yourself. Non-expert handling of the devices may damage them.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed limits for exposure to
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. Government. These limits are part
of comprehensive guidelines and establish permitted levels of RF
energy for the general population. The guidelines are based on
standards that were developed by independent scientific
4
organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety
margin designed to assure the safety of all persons, regardless of
age or health. The exposure standard for wireless fixed phoned
employs a unit of measurement known as the Specific Absorption
Rate, or SAR. The SAR limits set by the FCC are 1.6W/kg. Tests
for SAR are conducted using standard operating positions
accepted by the FCC with the phone transmitting as its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to operate
at multiple power levels so as to use only the power required to
reach the network. In general, the closer you are to a wireless
base station, the lower the output power. The Highest SAR Values
for this model phone when tested for use on the Right cheek were
1.15mW/g.
Some electronic devices are susceptible to electromagnetic
interference sent by phone if inadequately shielded. Please use
phone at least 20cm or as far as you can from TV set, radio and
other automated office equipement so as to avoid interference.
For body-worn operation, this phone has been tested and meets
FCC RF exposure guidelines when the handset is positioned a
minimum of 15 mm from the body without any metal parts in the
5
vicinity of the handset.
NOTE:This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for
help.
i
Content
1 General Information....................................................... 1
1.1 Welcome....................................................................................1
1.2 Security.....................................................................................1
1.3 Safety Warnings ..............................................................2
1.4 Limit Warranty..........................................................................5
1.5 Limitation of Liability...............................................................6
2 Know Your Phone............................................................ 8
2.1 Keypad...................................................................................8
2.2 Instruction of Interface Icon....................................................11
2.3 Technical Parameters...............................................................12
2.4 Battery.....................................................................................12
2.4.1 Remove and Installation of Battery .................................12
2.4.2 Charging the Battery........................................................13
2.5 Connecting to the Network .....................................................15
2.5.1 UIM Card ........................................................................15
2.5.2 Insertion and Extraction of UIM Card.............................15
2.5.3 Power on/off Phone .........................................................16
2.5.4 PIN Code.........................................................................16
2.5.5 Connecting the Network..................................................17
ii
3 Basic Operations............................................................ 18
3.1 Making a Call..........................................................................18
3.2 Answering a Call.....................................................................20
3.2.1 Handset Auto Answer......................................................20
3.2.2 Setting Any Key Answer .................................................20
3.2.4 Incoming Call Silence .....................................................21
3.3 In Conversation.......................................................................21
3.3.1 Silence in Conversation...................................................21
3.3.2 Adjusting Volume in Conversation..................................21
3.3.3 Selecting Options in Conversation ..................................21
3.4 Menu Functions ......................................................................22
4 Names............................................................................. 23
4.1 Viewing Records.....................................................................23
4.2 Finding Records......................................................................23
4.3 Adding New Entry ..................................................................24
4.4 Editing Contacts of Names......................................................26
4.5 Delete a Records .....................................................................26
4.6 Delete All Records..................................................................26
4.7 Selecting Group ......................................................................27
4.8 Setting Speed Dial...................................................................27
4.9 Viewing and Making Speed Dial.............................................28
4.10 Capacity ................................................................................28
4.11 Batch Operation ....................................................................29
iii
5 Messages......................................................................... 31
5.1 Sending a New Message .........................................................31
5.2 Receiving Incoming Call while Editing Message ...................32
5.3 Reading Message ....................................................................32
5.4 Viewing OutBox .....................................................................33
5.5 Erasing Messages....................................................................33
5.5.1 Deleteing a Message........................................................33
5.5.2 Erasing All Messages ......................................................34
5.6 Reading and Setting Voice Mail...........................................34
5.6.1 Reading Voice Mail .........................................................34
5.6.2 Set Voice Mail Number ...................................................34
5.7 Message Settings.....................................................................35
5.7.1 Save Position .................................................................35
5.7.2 Auto Save ........................................................................35
5.7.3 Automatically Erasing Inbox...........................................35
5.7.4 Set Proformatted message ...............................................35
5.7.5 Messages Alert ................................................................36
5.7.6 Delivery Acknowledging.................................................36
5.7.7 Msg Priority.....................................................................36
5.7.8 Memory Status.................................................................36
6 Call History.................................................................... 38
6.1 Viewing Recent Calls..............................................................38
6.2 Erasing Recent Calls List........................................................39
iv
6.3 Call Timers..............................................................................39
7 Settings........................................................................... 40
7.1 Sound......................................................................................40
7.1.1 Volume.............................................................................40
7.1.2 Ring of Incoming Call.....................................................40
7.1.3 SMS Ring........................................................................41
7.1.4 Ring of Power On/Off .....................................................41
7.1.5 Alert Type........................................................................41
7.1.6 Key Beep.........................................................................42
7.2 Display....................................................................................42
7.2.1 Wall Paper Set ..............................................................42
7.2.2 Set Backlighting ..............................................................42
7.2.3 Set Brightness..................................................................43
7.2.4 Set Contrast .....................................................................43
7.2.5 Set Language................................................................43
7.2.6 Setting Time Format........................................................43
7.2.7 Changing Banner.............................................................43
7.3 Call Settings............................................................................44
7.3.1 Setting Headset Autoanswer............................................44
7.3.2 Setting Any Key Answer .................................................44
7.3.3 Voice Privacy...................................................................44
7.3.4 Alert.................................................................................45
7.3.5. Supp. Services ................................................................45
v
7.3.6 Fire Proof.........................................................................47
7.3.7 Flip Open Answer Call....................................................48
7.4 Security Settings .....................................................................48
7.4.1 Setting Phone Lock..........................................................49
7.4.2 Setting PIN Code.............................................................49
7.4.3 Restore setting.................................................................49
8 Toolkit............................................................................. 50
8.1 Calendar..................................................................................50
8.2 Alarm Clock............................................................................50
8.3 Calculator................................................................................51
8.4 Voice Memo............................................................................52
8.4.1 Recording in Normal.......................................................52
8.4.2 Recording in Conversation..............................................52
8.4.3 Recording with Incoming Call/Message..........................53
8.5 Games .....................................................................................53
8.6 Stopwatch................................................................................54
9 VAS................................................................................. 55
10 Text Input....................................................................... 56
10.1 Multitap Input .......................................................................57
10.2 Numbers Input ......................................................................57
10.3 eHiText Input .....................................................................57
10.4 Symbols Input.......................................................................58
vi
11 Troubleshooting............................................................. 59
vii
Explanation for
Mobile Phone with/without UIM Card
There are two types of ZTE CDMA Mobile phone, one need UIM
card inserted and another does not need. Sections or functions in this
manual are for the phone with UIM card. If your phone could be used
without UIM card, please pay attention to the following items:
1. You can use your phone without inserting the UIM card.
2. Some functions are only available with UIM and won't display,
such as,
You can save the new contact only in Phone, not in UIM.
You can save the new message only in Phone, not in UIM.
The message in Inbox can not be moved to UIM.
There is no PIN Lock function in Security Setting.
1
1 General Information
1.1 Welcome
Thank you for choosing C350 CDMA 1X Digital Mobile Phone.
To guarantee the mobile phone always in its best condition, please
read this manual carefully and keep it for future use.
The pictures, symbols and contents in this manual are just for your
reference. They might not be completely identical with your phone.
Please subject to the real object. ZTE operates a policy of continuous
development and reserves the right to update and modify the technical
specifications in this document at any time without prior notice.
1.2 Security
If your mobile phone is lost or stolen, please report to your service
provider or agencies of banning the use of your lost UIM card and
phone, which will protect you from economic losses resulted from
unauthorized use.
You need to provide the phone’s ESN number labeled. You can
see ESN number after removing the battery. Please keep ESN
number for future use.
To protect your mobile phone from illegal use, please take the
2
security measures as follows:
Set PIN code of the UIM card.
Take it with you as you can.
1.3 Safety Warnings
To the Owner
Some electronic devices are susceptible to electromagnetic
interference sent by mobile phone if inadequately shielded, such
as electronic system of vehicles. Please consult the manufacturer
on the device before using the phone if necessary.
Operating of mobile phone may interfere with medical devices like
hearing aides and pacemakers. Please always keep the mobile
phone more than 20 centimeters away from such medical devices
when the phone is powered on. Do not carry the mobile phone in
the breast pocket. Power the mobile phone off if necessary.
Consult a physician or the manufacturer on the medical device
before using the phone.
Be aware of the usage limitation when using a mobile phone at
places such as oil warehouses or chemical factories, where there
are explosive gases or explosive products being processed,
because even if your phone is in standby mode, it still transmits
radio frequency (RF) energy. Therefore, power off your phone if
required.
Pay attention to traffic safety. Do not use your mobile phone while
3
driving. Park before making or answering a call.
Store the phone out of the reach of little children. The phone may
cause injury if used as a toy.
Mobile Phone
Please use original accessories or accessories that are
authorized by the manufacturer. Using any unauthorized
accessories may affect your mobile phone’s performance, and
violate related national regulations about telecom terminals, or
even endanger your body
If you want to clean your phone, please use clean fabric that is a
bit wet or anti-static. Do not use harsh chemical cleaning solvents
or strong detergents to clean it. Turn off your phone before you
clean it.
As your mobile phone can produce electromagnetic field, do not
place it near magnetic items such as computer disks.
Using the phone near electrical appliances such as TV, telephone,
radio and personal computer can cause interference, which
affects the function of the phone.
Do not expose your mobile phone to direct sunlight or store it in
hot areas. High temperatures can shorten the life of electronic
devices.
Prevent liquid from leaking into your phone.
Do not drop, knock or harshly treat your phone. Rough handling
4
can break internal circuit boards.
Do not connect the phone with other unauthorized peripheral
equipments.
Do not attempt to disassemble the mobile phone and battery by
yourself. Non-expert handling of the devices may damage them.
Do not charge the mobile phone without battery.
On occasion of emergent calling, keep your phone in status of
power on and in area of service. On the condition of standby,
press the key to enter emergency phone number, and then press
Send key to make a phone call.
Battery Using
Do not short-circuit the battery, as this can cause excessive heat
and fire.
Do not store battery in hot areas or dispose of it in a fire to avoid
explosion.
Never use any charger or battery damaged or worn out.
Return the wear-out battery to the provider or put it in the
appointed recycle place. Do not put it in familial rubbish.
Warning: If the battery is broken, keep away from content. If it
taints your skin, wash your skin with abundant fresh water and
ask doctor for help if necessary.
5
Safety and General Using in Vehicles
Before making or answering a call, you should pay attention to
the local laws about using wireless mobile phones and take them
into account in practical use.
Safety airbag, brake, speed control system and oil eject system
shouldn’t be affected by wireless transmitting. If you do meet
problems above, please contact your automobile provider.
Please power off your mobile phone when refueling your
automobile, and so do the place where duplex wireless
equipments are banned. Don’t put your phone together with
flammable or explosive items, as inner spark may cause fire.
In Aircraft
Follow the restrictions in aircraft. Wireless devices can cause
interference in aircraft.
Please power off your mobile phone before taking off till landing. In
order to protect airplane’s communication system from
interference, it is never allowed to use mobile phone when it is in
flight. Using mobile phone before the plane taking off should get
aircrew’s permission according to safety regulations.
1.4 Limit Warranty
The warranty does not apply to defects or errors in the product
caused by:
6
(a) Reasonable abrasion.
(b) Misuse including mishandling, physical damage, improper
installation, unauthorized disassembly of the product.
(c) Water or any other liquid damage.
(d) Any unauthorized repair or modification.
(e) Power surges, lightning damage, fire, flood or other events
outside ZTE’s reasonable control.
(f) Use of the product with any unauthorized third party
products such as generic chargers.
(g) Any other cause beyond the range of normal usage for
products.
End User shall have no right to reject, return, or receive a
refund for any product from ZTE under the above-mentioned
situations.
This warranty is end user’s sole remedy and ZTE’s sole liability
for defective or nonconforming items, and is in lieu of all other
warranties, expressed, implied or statutory, including but not
limited to the implied warranties of merchantability and fitness for a
particular purpose, unless otherwise required under the mandatory
provisions of the law.
1.5 Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect, special,
incidental or consequential damages resulting from or arising out of or
7
in connection with using this product, whether or not ZTE had been
advised, knew or should have known the possibility of such damages.
8
2 Know Your Phone
2.1 Keypad
Key Tip Function Description
Send key
Make or answer a call.
Press Send key in standby mode to
enter all Records list.
Press Send key two times directly
Earpiece
Left Select Key Right Select Key
LCD Screen
Send Key
Charger/Earphone
connector
End Key
0～9 Number Key
Micro
p
hone
4 Way scroll key
9
to redial the last number.
End key
End an active call or reject a call.
Power on/power off.
Exit from any interface to standby
mode.
Left select
key
Enter main menu in standby mode.
Switch to the options of left bottom
submenu.
Right select
key
Enter Names in standby mode.
Switch to the options of right bottom
submenu.
OK key
Confirm the commands and options
selected.
Confirm the character chosen while
character inputting.
Enter MobileShop menu in standby
mode
Up/Down key
(Scroll key)
Scroll the cursor up and down.
Used as selection key up and down
for keying in commands and
selecting options shown on the
display.
In standby mode, hold Up key to
10
set Silence All; Press Down key
to enter Ring menu.
Press Up key to enter Messages
menu.
Used as direction key in games
Left/Right key
(Scroll key)
Scroll the cursor left and right.
Used as selection key to scroll
cursor left and right for keying in
commands and selecting options
shown on the display.
In standby mode, press Left key
to enter Toolkit, press Right key
to enter Games menu.
Adjust volume in conversation.
Used as direction key in games.
~ 0~9 Number
key
Key in numbers or characters.
Make a Speed Dial call.
Hold 0 Key to input + in standby
mode.
*key，#key
# key:
Press # key to select text input
mode.
* key:
Hold
* key in standby mode to
11
enable/disable vibration.
In text mode, press * key once to
enter Symbols mode, press * key
twice to enter template message.
Note: To “press” the key in this manual means to press the key and
release it. To “hold” the key means to keep pressing the key for two
seconds or more.
2.2 Instruction of Interface Icon
Icon Indication
Signal strength
Roaming
New voice message
New message
New urgent message
Ringer with vibration
Vibration
Earphone
Silence All
Alarm
Power indicator
12
2.3 Technical Parameters
Handset
Type ZTE C350
Dimensions （Width×Height×Thickness）
46mm×90mm×16mm
Weight About 75g(Battery Included)
Battery
Continuous standby
time
About 80h～160h (Subject to Network)
Continuous talk time About 2h～4h (Subject to Network)
Note: Please refer to the real phone for other relative parameters
of the battery and charger.
2.4 Battery
The attached Li-ion battery along with the phone can be used after
unpacking. For the first three times, please use up the power and
charge it fully for a new battery to perform well.
2.4.1 Remove and Installation of Battery
Remove：(1) Press and push the back-cover of the phone down to
release and remove it off the phone. (2) Put finger on the side
finger grips, and then lift up the battery from the finger grips to
remove the battery.
13
Installation：(1) Replace the battery into the battery slot, to be
noted that the lower end of the battery firstly inserted. (2) Put the
back-cover of the phone flatly upon the body of phone. Direct the
back cover towards the locking catches on the both sides of the
phone and push the back-cover of the phone upward to lock the
cover into its place.
2.4.2 Charging the Battery
Plug out rubber away (turn 180° as shown in the picture) from
the jack on the bottom of the handset and connect the lead from
14
the charger to the socket on the bottom of the phone. (Note:
The side with arrow should be upright while connecting).
Connect the charger to a standard wall AC socket.
Meanwhile, the charging indicator in up-right corner of the
display flops cyclically, indicating the charging is going. In
power-off mode while charging, the display only shows the
charge indicator. If the battery is completely flat in storage or
used up, it may take for a while before the charging indicator
appears on the display or any calls can be made.
When the charging indicator on the screen stops flopping, the
charging is completed. The charging takes usually up to 2～3
hours. In the process of charging, it is a normal phenomenon
that the battery, phone and charger get into hot accordingly.
After the completion of charging, disconnect the charger from
the phone and AC socket.
Note：
When it is in charge, place the phone on condition of good
ventilation and temperature between -5℃～＋45℃. Ensure to
use the charger offered by the manufacturer. Using unauthorized
charger may cause danger and violate the authorization of the
phone and the guarantee article.
When the phone is automatically switched off or indicates the
alarm information of power shortage, please charge the battery in
time.
15
The duration time of the standby status or conversation of the
phone is based on ideal working environment. In practice, the
working time of battery varies with network condition, working
environment and application methods.
2.5 Connecting to the Network
2.5.1 UIM Card
Before using the phone, please insert effective UIM (User Identity
Module) card into the phone.
All the information related to the network connection is recorded
in the metal plane area of UIM card together with the information you
stored in your Contacts in the UIM card. The UIM card can be inserted
into any CDMA phone to use (new phone automatically reads UIM
card).
Please do not touch the metal plane area of the card to avoid
missing and damaging information in the card and put UIM card in place
far away from electricity and magnetism.
Warning：Please power off the phone before taking out UIM card.
It is prohibited to insert or taking out UIM card in the condition of
connecting with external power.
2.5.2 Insertion and Extraction of UIM Card
Power off the phone, remove the battery and other external power.
Insert UIM card into UIM card slot in the phone，or pull out UIM card out
16
of slot, as shown in picture hereinafter.
2.5.3 Power on/off Phone
Press and hold End key to power on/off the phone.The phone will
check whether UIM card inserted well or not. And then follow the prompt
indication on the display:
Enter PIN——Key in PIN code of UIM card if it is set.
Searching——Search appropriate network connected.
2.5.4 PIN Code
To set PIN code (personal identification number) is to avoid the
illegal usage of UIM card.
To input PIN code of UIM card and press OK key to confirm to
start on using phone. If inputting wrong PIN three times continuously,
UIM card will be locked by network.
Note：The network provider offers you PIN code (four to eight
digits). You should change PIN code as soon as possible for security.
To set PIN code, see “7.4 Security Settings”.
17
2.5.5 Connecting the Network
After powering on and inputting PIN code, the phone
automatically searches the network available and in state of standby
mode.
Besides sending and receiving calls, you can also do:
Press Left select key to enter Main menu.
Press Right select key to enter Names menu.
Hold
* key to enable/disable vibration mode.
Hold Up key to set the phone in Silence All.
Press Up key to enter Messages menu.
Press Left key to enter Toolkit menu.
Press Right key to enter Games manu.
Press Send key to enter All Calls list.
Press OK Key to enter MobileShop
18
3 Basic Operations
3.1 Making a Call
Please ensure that you are in the place where the signal can be
received. Examine network signal strength icon on the screen.
The more the indication bars, the stronger the intensity of receiving
signal is. If there is no bar, please move to the place where the intensity
of receiving signal is better. Sometimes, you only need to change the
direction.
Making a National Call
Press Number key to key in phone number, and add area code
when making a long distance call (no need to add area code
when dialing local number in some area). Press Send key to
call out. Press End key to end the call and conversation.
Making an International Call
Enter the country code, area code (without the leading 0) and
the complete telephone number you want to dial, press Send
key to call out.
19
Before the country code, hold 0 key to enter the international
prefix “+” (the character “+” replaces the international access
code) or key in international prefix e.g. “00” of international call
directly.
Making Recent Calls
All calls you recently dialed, received or missed are saved in
your phone. All numbers are grouped as Missed Calls, Incoming
Calls and Outgoing Calls. When the list is full, the oldest number
will be erased automatically when new record is coming.
You can check the list as follows:
In standby mode, press Send key to view All Recent Calls.
The number listed in can be directly dialed by pressing
Send key.
Making Pause Calls
You can make use of pause call to dial an extention or voice
service call.
E.g. Key in phone number, press OK key to select “P” on the
display (character “P” added accordingly), and then key in number
afterwards. Press Send key to dial the first number, when connected,
press Send key again to dial the second number automatically. “P” can
Country code + Area code + Telephone number
0086 755 26770000
20
be used for not once only.
3.2 Answering a Call
When a call is incoming in standby mode, the phone will offer
corresponding ringer or vibration to prompt according to your settings.
With the number already saved in Names, the phone also shows the
name of caller meanwhile.
• Press Send key to answer an incoming call.
• Press End key to end a call and the call duration is
temporarily displayed.
See “7.3 Call Setting” or refer to other ways of answering calls for
your option as follows.
3.2.1 Handset Auto Answer
You can set handset to answer an incoming call automaticlly.
• Select Menu→ Settings→ Call Setting→Auto Answer
• Select On/Off, and press OK key. The phone can be connected
in 5 seconds.
3.2.2 Setting Any Key Answer
• Select Menu→ Settings→ Call Setting→ One-Touch.
• Select On/Off, and press OK key.
An incoming call can be answered by pressing any key except End
key, Left /Right select key.
21
3.2.4 Incoming Call Silence
• When a call is coming, press Right select key to select Mute
the ringer tone.
• This function silences the current incoming call only. The phone
will ring normally as next call coming.
3.3 In Conversation
3.3.1 Silence in Conversation
During conversation, you can press left select key to select Option
(Names, Messages or Record) or press right select key to choose
Mute displayed. Select Mute to let the other party temporarily not hear
your voice; Select Unmute back to normal. You can also enter
Contacts, Messages or Record during a conversation.
3.3.2 Adjusting Volume in Conversation
Press Left/Right key to adjust volume of Earpiece during a call.
3.3.3 Selecting Options in Conversation
During a call, press Left/Right select key to select options of
Option (Names, Messages or record), Mute/Unmute,etc.
Select Mute/Unmute to let the other party temporarily can
or can not hear your voice;
Select Option for selection in Menu, such as Names,
Messages or record, with no worry about the ending of
22
conversation.
3.4 Menu Functions
Main Menu Function:
i. In standby mode, press Left select key to enter main Menu. Scroll
Up/Down or Left/Right key through the menu and select
functions according to the prompt on the screen.
ii. If the menu contains submenus and further submenus, select
options and submenu you want according to the prompt on the
screen.
iii. Press OK key or Right Select Key to set or return to the previous
menu. Press End key to exit to standby mode.
Bottom Menu Function:
If options are displayed on the bottom of the screen, press
Left/Right select key to select. Press OK key or Right select key
to set or exit.
The functions of phone are mainly grouped in main Menu:
Names, Messages, Call History, Settings, ToolKit and VAS.
Please refer to the text hereinafter in this manual in detail.
23
4 Names
You can save contacts in phone and UIM card. Each contact in
phone’s memory has three phone numbers，home number, mobile
number and work number, and each contact in UIM card only has one
phone number. Select Option → Other options →Capacity to view
memory of phone and UIM card.
4.1 Viewing Records
Select Menu→ Names. You can view the corresponding records
in all list. Scroll to the name you are finding, and press OK Key, you
can see the details of the name.
Note: When there is no storage record in Contacts, it will indicate
“No Item”.
4.2 Finding Records
You can search for a name in Names in pop-up window by
choosing:
In All
24
1. Select Menu → Names.
2. Press Up/Down key to scroll though the corresponding name(s)
and records in the list. Scroll to the record you are finding, and press
OK key to view the details.
Search
1. Select Menu → Names.
2. Select one contact record and choose Search in Option. You
can key in the first characters of the name you are searching for to view
contact directly in All List.
3. Press Up/Down key to scroll though the corresponding name(s)
and records in the list. Scroll to the name you want, and press OK key
to view the details or select Option.
In Standby Mode:
To quickly find phone number in Names in standby mode, press
Right select key to scroll to the name you want.
All the contacts will be list by the letter of the name. If no contact in
the list, “No Item” will be displayed.
4.3 Adding New Entry
1. Select Menu→ Names.
2. Select one contact record and choose Add New Entry in
Option.
3. Select the position of would-be added information: Phone, UIM
4. If you choose in Phone, press Up/Down key to write the
25
information of Name/Group/Home Number/Mobile Number/work
Number, if you choose in UIM, press Up/Down key to write the
information of Name/number, See “10 Text Input ” more
instructions for writing text and character.
5. After the completion of writing, press OK key to save the
contact.
6. Scroll to the just-added phone number to reedit, press OK key
or select Option. Further operation can be executed, such as:
Edit: Edit the number.
Delete: Delete the number.
Make a call: Make a call to this number.
Send Message: Send message to this number.
Copy to Phone/UIM: Copy the contact to Phone/UIM.
Move to Phone/UIM: Move the contact to Phone/UIM.
Set Speed Dial: Assign a speed dial number to the phone
number. (When the contacts saved in UIM, there is no this
function.)
Note: In standby mode, key in phone number, press Left select
key to save.
If you save the same number again, the phone prompts to remind
you this number is already exist.
26
4.4 Editing Contacts of Names
1. Select Menu→ Names.
2 Scroll to the record you want to edit or Search in Option to
search for would-be edit record.
3. Select Option to Edit name, group, phone number and press
OK key.
4. Scroll to the Name, Group, Home Number, Mobile number
Work Number, to make modification.
5. Press Right select key to erase character of the current, and
rewrite the new.
6. Select Save, “Succeed to save”appears on the display.
4.5 Delete a Records
1. Select Menu → Names.
2. Scroll to the record you want to erase or Search in Option to
search for would-be erased record.
3 Select Option to delete contact, and press OK key. “Confirm to
delete?” indicated on the display.
4. Press OK key to make delete.
4.6 Delete All Records
You can Delete All the records in Names.
Or see “7.4 Security Settings” for the details of other ways of
erasing.
27
4.7 Selecting Group
There is three groups, family, friend and colleague preset in you
phone, you can rename them and set ringer for the different
group.
1. Select Menu→ Name.
2. Select one record listed in phone’s memory, and press Left
select key or OK key.
3. Select Edit Group from Option.
4. Scroll to the Group you wantd edit, family, friend or colleague.
Further operation can be executed, such as:
Edit Group Name: prees OK and you can rename the name
of group.
Select Ringer. Set the personal ringer for the group. You
can select ring from the list set already in phone or download
ring by yourself.
4.8 Setting Speed Dial
1. Select Menu→ Names.
2. Select one contact record listed in phone’s memory, press OK
key or choose View details in Option.
3. Scroll to the number you select and choose Set speed dial in
Option.
4. Press OK key/Left select key and select an Empty slot in list.
5. Press Right select key.
28
4.9 Viewing and Making Speed Dial
Viewing：
Select Menu→ Names.
Select one contact record and choose Options, Other options,
View speed dial list.
Dialing：
You can also make a call by entering speed dial number in the
standby mode.
Method 1: Enter speed dial number, press Send Key to dial.
Method 2: Directly hold the Speed Dial Number digit key. If the
Speed Dial Number is one-digit, directly hold the digit key. If the Speed
Dial Number is two-digit, press first digit key and then hold the second
one. For example: If the Speed Dial Number is 25, you should press 2
key firstly, and then hold 5 key, thus it can dial directly.
Note: Some handset may not support method 1. Some handset
support only one-digit speed dial number, some support both one-digit
and two-digit speed dial number.
4.10 Capacity
1. Select Menu→Names.
2. Select one contact record and choose Options, Other options,
Capacity.
3. View the number of saved entries and maximum number of
29
entries saved in phone and UIM card.
For example: phone: 8/500, UIM Card: 4/500, indicating that 500
records entries in Max., out of which eight have be saved in phone. And
500 entries in Max., out of which four have been saved in UIM Card.
Please consult with service supplier for storage capacity of UIM card.
4.11 Batch Operation
1. Select Menu→ Contacts.
2. Select one contact record and choose Options, Other options,
Batch operation to copy, move contact in (between) phone’s memory
or SIM card.
Copy Phone To UIM: Copy all contacts of the phone’s memory
to UIM card
Note: This function can copy all the contact records to UIM card,
and all the different records or numbers under the same name will be
copied accordingly to UIM card one by one as different records.
Copy UIM To Phone : Copy all contacts in UIM card to the
phone’ memory.
Note: This function can copy all the contact records to the phone’s
memory, and all the different records with same name will be copied
accordingly to the phone’s memory.
3. Move all contacts as follows:
Move Phone To UIM: Move all contacts of the phone’s memory
to UIM card
30
Note: This function can move all the contact records to UIM card,
and all the different records or numbers under the same name will be
copied accordingly to UIM card one by one as different records.
Move UIM To Phone: Copy all contacts in UIM card to the
phone’ memory.
Note: This function can copy all the contact records to the phone’s
memory, and all the different records with same name will be copied
accordingly to the phone’s memory.
31
5 Messages
This is introduction of how to send, receive and erase the
messages in your phone.
Note：The function introduced hereinafter may differ with different
service offered in your area. Please consult with your service provider
for more detailed information.
5.1 Sending a New Message
Please consult with the service provider to support the network
service of sending message. You can only send message to the mobile
phone which can receive message.
1. Select Menu→ Messages→ New SMS.
2. Write message text. See “10. Text Input” more instructions for
writing text and character..
3. Press OK key/ Left Select key to
- Send message: Send message.
- Save: Save the message in OutBox.
4. Input the recipients’ Phone Number, or select phone number
from Names. Hold # key to input “;”, you can input the multi-receivers’
32
phone number or select phone number directly from Names to sent the
message to multi receivers.
5. Press OK Key to send or save the message.
Note: The SMS centers of some cities and regions do not support
messages longer than 160 characters.
5.2 Receiving Incoming Call while Editing Message
• If you do not want to receive the incoming call, press End key.
• If you want to receive the incoming call, press Send key. After
receiving the call, you can continue to edit and send the message.
5.3 Reading Message
On receipt of a new message, the phone prompts you by vibration
or ringer (up to silence and ringer in Settings). The display indicates
“MESSAGE!” and press OK key to View. Erase old messages to keep
space for new messages.
1.Select Menu→ Messages→ Inbox.
2. Scroll to the message you want to read.
3. Press OK key to read message. You can also press Up/Down
key to scroll.
4. After reading, press Left select key to select:
－Reply： Reply message to sender
－Forward： Forward the message to other recipients.
－Delete：Erase this message.
－Voice Call：Call back to sender.
33
－Extract ：Save sender’s number to contacts, select Phone to
save the sender’s number in Phone and select UIM save the sender’s
number in UIM Card.
－Copy to UIM/Phone：Copy the message to UIM card or Phone.
5.4 Viewing OutBox
1. Select Menu→ Messages→ OutBox.
2. Scroll Message List.
3. Press OK key to read message.
4. Select Right Select Key to return to the list. Select OK Key to
Forward, Delete, Send the message.
5.5 Erasing Messages
Delete and erase old messages to release space for phone’s SMS
memory. You can select erasing messages when sending or reading
messages; erase messages one by one or all in Inbox, Outbox.
5.5.1 Deleteing a Message
1. Select Menu→ Messages.
2. Select messages location: Inbox, Outbox.
3. Press Up/down key to select to-be-erased messages.
4. Select Left select key to delete messages. “Delete?” appears.
5. Select OK key/Left select key to Delete this message.
34
5.5.2 Erasing All Messages
1. Select Menu→ Messages .
2. Select to-be-erased messages in Inbox or Outbox.
3. Press Left select key to Delete all the message(s) in Inbox or
Outbox. “Delete all?” appears.
5. Select OK key/Left select key to delete all messages in Inbox
or Outbox.
5.6 Reading and Setting Voice Mail
5.6.1 Reading Voice Mail
Before using Voice Mailbox, please consult with network provider
to confirm that the function of voice mail box has been activated. After
your successful setting, network will automatically transfer divert
incoming call(s) to your voice mail box, and send message(s) to your
phone.
Select Menu→ Message→Voice mail→Call Voicemail to dial
voice mail box number to listen to the leaving message following guide
prompt.
Note: The function needs network support.
5.6.2 Set Voice Mail Number
Select Menu→ Message→Voice mail→Setting No. .
2. Set Voice Mail Number.
35
5.7 Message Settings
You can set your message box before you use it.
5.7.1 Save Position
1. Select Menu→ Messages→ Msg Settings→Save Position.
2. Select UIM or Phone and press OK key to save message in
UIM card or phone.
5.7.2 Auto Save
1. Select Menu→ Messages→Msg Settings→Auto Save.
2. Select On or Off for your phone can or can not automatically
save senting message.
5.7.3 Automatically Erasing Inbox
Set erasing the last read message in Inbox automatically when
Inbox is full.
1. Select Menu→ Messages→Msg Settings→Auto Delete.
2. Select On or Off and press OK key/Left select key.
5.7.4 Set Proformatted message
The phone has a group of some common built-in phrases and
sentences, such as, “Please call me immediately”, “I am busy now, call
you later.” etc.
1. Select Menu→ Messages→ Msg Settings→Set Idiom.
2. Scroll to the message you want to send and press OK key.
36
3. Select Edit to edit the message , see “5.1 Sending a new
message” in detail. Select Send to send the message.
Note: in text input, press * key twice to enter Set Idiom.
5.7.5 Messages Alert
1. Select Menu→ Messages→ Msg Settings→ Alert Setting.
2. Select the mode of alert as Once or Cyclic when receive a
message.
5.7.6 Delivery Acknowledging
1. Select Menu→ Messages→Msg Settings→ Delivery Ack.
2. Select On or Off for your phone can or can not automatically
receive message from network informing you whether you have sent
message successfully.
5.7.7 Msg Priority
1. Select Menu→ Messages→ Msg Settings→Msg Priority.
2. Select Normal, Interactive, Urgent, Emergency for sending
message.
5.7.8 Memory Status
Select Menu→ Messages→Msg Settings→Memory Status.
View the number of saved messages and maximum number of
messages saved in phone and UIM card .
For example: Phone: 8/200, indicating that 200 records entries in
37
Max., out of which 8 have be saved in phone.
UIM: 4/100 And 100 entries in Max., out of which 4 have been
saved in UIM Card. Please consult with service supplier for storage
capacity of UIM card.
38
6 Call History
6.1 Viewing Recent Calls
Information of All Calls, Received Calls, Dialed Calls, Missed
Calls, including name, phone number, and call time and coversation
duration is saved in the Call History.
1. Select Menu→Call History.
2. Select All Calls, Missed Calls, Received Calls, Dialed Calls.
3. Press OK key.
4. Select one entry of the records and press OK key.
5. Select option:
- Call Information：Indicate number and conversation duration
informations.
- Save：Save the number in mobile phone’s Names.
- Delete：Delete the number from the list of Call History.
- Clear all: Delete all numbers from the list of All Calls, Received
Calls, Dialed Calls or Missed Calls.
39
- Call the number：Dial this number.
- SMS：Send message to this number.
- Black List：Add this number to the Black List.
If the UIM Card does not support the function of Incoming Call
Indication, you can only see part of the above-mentioned options.
6.2 Erasing Recent Calls List
1. Select Menu→Call History→Clear all.
2. Press OK key to delete all the numbers from the list of Call
History.
6.3 Call Timers
Your phone can record the talk time of dialing and receiving call.
1. Select Menu→ Call History→ Call timers.
2. Select an option from the list and press OK Key.
－Outgoing Calls：Indicate the talk time of all dialed call. The timer
can be reset.
－Incoming Calls：Indicate the talk time of all received call. The
timer can be reset.
－All Calls：Indicate the talk time of all dialed and received call.
The timer can be reset.
40
7 Settings
Your phone has different functions in Settings to meet your
requirement. They are: Sound , Display, Call Setting, Security .
7.1 Sound
7.1.1 Volume
You can adjust the volume of Ringer, earpiece and key beep.
1. Select Menu→ Settings→ Sound→ Volume.
2.Select Ringer Volume (When earphone is inserted, it is
earphone Ringer), Earpiece Volume or Key Beep Volume.
3. Press Left/ Right key to adjust volume. Press OK key.
7.1.2 Ring of Incoming Call
ZTEC350 offers various Ringers of incoming call for your selection.
1. Select Menu→ Settings→ Sound→ Ring → Ring Type.
2. Press Up/Down key to scroll to your selection in Preset Ring,
DownLoad Ring, or Record Ring, press OK key.
41
7.1.3 SMS Ring
You have a choice of various ringing tones for message in phone.
1. Select Menu→ Setting→ Sound→Ring→ SMS Ring.
2. Press Up/Down key to scroll to select and press OK key.
7.1.4 Ring of Power On/Off
You can make a choice of various ringing tones when power on/off
the phone.
1. Select Menu→ Setting→ Sound→Ring.
2. Select Power On Ring or Power Off Ring and set the phone in
Silence or ring when you power on/off the phone.
7.1.5 Alert Type
You can select alert type for an incoming call, earpiece and
message.
1. Select Menu→ Setting→ Sound→ Alert type.
2. Select an option in list：
－Vibra + Ringer：Set mobile phone in ten-second vibration case,
then continuous Ringer later to prompt incoming call.
－Ringer： Set Mobile phone in Ringer case to prompt.
－Vibrate： Set mobile phone in vibration case to prompt.
－Silence All： Set mobile phone in silence case with backlighting
to prompt.
Note: Type of “Vibra + Ringer” for message is as same as type of
42
“Vibrate”.
7.1.6 Key Beep
Set phone beep sound or not when you press keys.
1. Select Menu→ Settings→ Sound→ Key Beep.
2. Select an option:
－Off： Not utter sound when press keys
－Standard： Utter a fixed- length DTMF tone in short when press
keys.
－Long： Utter DTMF tone even longer when press keys
7.2 Display
7.2.1 Wall Paper Set
You can select different wall papers as background in idle state.
1.Select Menu→ Settings→ Display→Wall Paper.
2. Press Up/Down Key to select Preset Wallpaper or Download
Wallpaper.
3. Press Up/Down Key to scroll the list and press OK key/Left
Select Key to confirm.
7.2.2 Set Backlighting
During a call or pressing keys, the display lights on. You can set
lighting duration and type.
1. Select Menu→ Settings→ Display→Backlight.
43
2. Select an option in pop-up window:
－10 Sec：Keep backlighting for 10 seconds after last pressing.
－30 Sec：Keep backlighting for 30 seconds after last pressing.
3. Press OK key to confirm.
Note：In conversation, backlighting consumes the power quickly
and shortens continues conversation and standby time.
7.2.3 Set Brightness
1. Select Menu→ Settings→ Display→ Brightness
2. Press Left/Right key to adjust brightness, and press OK
7.2.4 Set Contrast
1. Select Menu→ Settings→ Display→ Contrast
2. Press Left/Right key to adjust contrast, and press OK
7.2.5 Set Language
1. Select Menu→ Settings→ Display→Language.
2. Select English as the language, and press OK key.
7.2.6 Setting Time Format
1. Select Menu→ Settings→Display→ Time Format.
2. Select AM/PM or 24 HR, and press OK key
7.2.7 Changing Banner
View and edit phone’s greeting to which appears on the display to
44
your own.
1. Select Menu→ Settings→Display→ Banner.
2. Press OK key to Edit.
3. Key in character(s) and press Right Select key to erase
character(s).
4. Press OK key twice to Save.
7.3 Call Settings
7.3.1 Setting Headset Autoanswer
When mobile phone connects with earpiece (buy separately), you
can set earpiece to answer automatically incoming call.
1. Select Menu→ Settings→Call Setting→ Auto Answer.
2. Select On/Off to activate or deactivate automatic answering.
3. Press Left select key or OK key.
7.3.2 Setting Any Key Answer
• Select Menu→ Settings→ Call Setting→ One-Touch.
• Select On/Off, and press OK key.
An incoming call can be answered by pressing any key except End
key, Left /Right select key.
7.3.3 Voice Privacy
1.Select Menu→ Settings→ Call Setting→Voice Privacy
2. Select Enhanced or Standard to set voice encryption in
45
Standard or set voice encryption Enhanced.
3. Press OK Key/Left Select Key.
7.3.4 Alert
You can select On or Off to set the alert.
1. Select Menu→ Settings→Call Setting→ Alert.
2. Select an option on display and press OK key.
－Service：When there are service available.
－Remind Minute：During a call, ten seconds ahead of every
minute, alert.
－Missed Call： When there are missed calls, alert.
－Roaming： When roam in active and handoff between service
areas or states occurs, alert.
For the function mentioned above, select On to operate; select Off to
cancel alert.
7.3.5. Supp. Services
When network supports Call Setting, you can use network
services of call waiting and call forwarding.
Note：All these functions are network services. Please consult with
network service provider to get corresponding service application.
Call Waiting
During a call, use Call Waiting to answer the waiting call prompted
by the network; Or dial another call meanwhile putting the first call on
hold. These calls can be shifted while you have calls in conversation.
46
Call Waiting lets you enjoy three-party conversation without
missing call.
1. Select Menu→ Settings→ Call Setting→ Supp.Services→
Call Waiting.
2. Select Option:
- Enable: To activate the Call Waiting function. The network will
notify you of an incoming call while you have a call in progress. You can
press Send key to get through the waiting call and switch one call to
another.
- Disable: To cancel the Call Waiting function.
Call Forwarding
Use Call Forwarding to forward the incoming call to a designated
phone number. After setting of call forwarding, phone will automatically
dial network to set the function in active.
1. Select Menu→ Settings→ Call Setting→ Supp.Services→
Call Forwarding.
2. Set type of Call Forwarding, press OK key.
－All: All is diverted Immediately in all conditions.
－Busy(Divert when busy): When the phone is busy, divert.
－No Answer(Divert when no answer): When there is no
answer, divert.
3. Select Enabled to:
Enter Number to which the phone will forward and press Left
select key/OK key. E.g. To forward incoming call to 12345678,
47
input: 12345678, press Left select key/OK key.
4. Select Disabled to disable Call Forwarding function.
7.3.6 Fire Proof
You can set Incoming calls bar in Fire Proof submenu including
Friend List, Black List, Current Settings.
Friend List
All the contacts will be listed by the letter of the name.
1. Select Menu→ Settings→Call Settings→Fire Proof→Friend
List.
2. Press OK key and select options:
Add: Add new contact in Friend List.
Edit: Edit this contact in Friend List.
Delete: Delete this contact in Friend List.
Clear all: Delete all the contacts in Friend List. If there is no
contact in the list, “List Empty” will be displayed.
Black List
All the contacts will be listed by the letter of the name.
1. Select Menu→ Settings→Call Settings→Fire Proof→Black
List.
2. Press OK key and select options:
Add: Add another new contact in Black List.
Edit: Edit this contact in Black List.
Delete: Delete this contact in Black List.
48
Clear all: Delete all the contacts in Black List. If there is no
contact in the list, “List Empty” will be displayed
Current Settings
You can set barring applications as follows:
Bar All: Bar all incoming calls.
Bar Black List: Only bar numbers listed in Black List.
Bar All Except Friend List: Only numbers listed in Friend
List are not blocked.
Cancel All: Cancel barring setting.
7.3.7 Flip Open Answer Call
1.Select Menu→ Settings→Call Setting→Flip Open Answer Call.
2.Select On or Off and press OK Key to set answer the call by
open flip.
7.4 Security Settings
Introduction to phone’s security options preventing others to avoid
illegal use or acquire your phone’s personal information. Please input
right phone Password and PIN code to enter.
Note：Consecutive inputting wrong PIN code for several times can
cause locking of UIM Card. To unlock, you need PUK. PIN code and
PUK Code may be offered together with the UIM Card. If not, please
contact with network operator. The default phone password is 0000, the
default PIN code is 1234, please change it to your own PIN code and
phone password as soon as possible.
49
7.4.1 Setting Phone Lock
1. Select Menu→ Settings→ Security.
2. Input your phone password, press OK key.
3. Move to Handset Lock, set On,Off or Change Lock, press OK
key.
7.4.2 Setting PIN Code
1. Select Menu→ Settings→ Security.
2. Input your phone password, press OK key.
3. Move to PIN Lock, set On,Off or Change Lock, press Left
select key or OK key.
7.4.3 Restore setting
Your phone offers factory default phone setting. You may modify
some options when you use phone. You can also Restore Factory
Default to renew some modified options to the origin.
1. Select Menu→ Settings→ Security.
2. Input your phone password, press OK key.
3. Select Restore Settings.
4. Select Ok to revert to confirm resetting or restoring factory
default or select Cancel to exit.
Note： Restoring the phone do not influence your phone password,
PIN code, Recent Calls, Contacts, InBox and OutBox.
Some setting, e.g. alarm, cannot be restored.
50
8 Toolkit
Toolkit offers two games: Brick Attack and Push Box, as well as
tools, such as,Calendar, Alarm clock, Calculator, Voice Memo,
stopwatch, Games.
8.1 Calendar
1. Select Menu→Toolkit→ Calendar.
2. Press Left/Right key or Up/Down key to select exact date you
want to view in pop-up calendar window. Press OK key.
3. Scroll Up/Down key to select options.
8.2 Alarm Clock
Set alarm alert at a certain time. Alarm alerts only when the
phone is in power on.
1. Select Menu→Toolkit → Alarm clock.
2. Select Set alarm to set, and press OK key. Select Alarms List
to view the settings. Select Set rest day to set the date of alarm.
51
Select Delete all to delete all settings.
3. When alarm rings, select OFF to stop alarming.
8.3 Calculator
Use calculator to execute basic math calculation.
1. Select Menu→Toolkit→ Calculator.
2. Key in digits. Press Left/Right key or Up/Down key to choose
“+”“-”“x”“/”according to the prompt. Press # key to input decimal
point, and press * key to change digit to positive number or negative.
Press OK key to display the result.
÷ Division Sign
- Subtraction Sign
= Equal Sign
+ Plus Sign
x Multiply Sign
. Decimal Point
± Change digit to positive number or
negative
Press Right Select key to erase digit one by one and exit to
previous window, press Left Select key to erase all digits and reset,
press End key to exit to standby mode.
Note：This calculator has a limited accuracy and is designed for
simple calculations.
52
8.4 Voice Memo
ZTEX350 supports Voice Memo function either in or not in
conversation with a capacity of saving 5 pcs records in max. When
there is no space in Voice Memo or Voice Memo is full, the phone
prompts.
8.4.1 Recording in Normal
1. Select Menu→ToolKit→ Voice Memo.
2. Scroll Up/Down key to select:
Record – When you are not in conversation, select Start
to begin a new Recording, or Stop/ Pause recording.
Record List – Play or Delete the record listed and named
by date and time, Back to previous pop-up menu.
Note: The record saved in normal will be listed in Settings→
Sound→ Ring →Ring Type as a kind of ringer tone.You can select it
or not as you like as ring of the phone. The record can not be deleted
as if it is activated as the ringer, unless you cancel the record as the
ring of the phone.
8.4.2 Recording in Conversation
When you are in conversation, select Record to pop-up window
of Voice Memo and select Start to begin a new Recording, or Stop,
Pause/Resume recording, without ending the call.
53
The phone exits back to the calling interface when the recording is
finished. The record will be saved automatically when the call is ended
without finishing recording, and exit back to interface of ending call.
8.4.3 Recording with Incoming Call/Message
With Incoming Call
While recording in state of non-conversation, receive a call
will stop recording. The record of phone will be saved
automatically and return to call interface.
With Message
While recording in state of non-conversation, receive a
message won’t stop recording. The phone prompts message alert
without display message interface.
With Others
- Alarm: Prompts later.
- Alert: Prompts later.
-Power off automatically while recording. Save record
automatically.
Note: In state of non-conversation, record voice via MIC; In state of
conversation, record voice via earpiece.
8.5 Games
8.5.1 Brick attack
After the screen appears greeting, it will indicate play guide.
54
You can select New Game to start a new game or Continue for
continuing the last game. Make use of the Left/Right key to
play the game.
8.5.2 Push Box
After the greeting, phone indicates play guide. You can select New
Game to begin a new game or Continue for continuing the last game.
Make use of the Number key and Scroll key to play the game.
8.6 Stopwatch
1. Select Menu→Toolkit→ Stopwatch.
2. Select Start to make stopwatch timing.
3. Select Stop to stop timing.
4. Select Reset to clear the time record.
55
9 VAS
This function needs network support by service provider. If your
UIM card can also support, menu of VAS appears on the display. If UIM
Card and network provider don’t support, the function is invalid. The
application of this function may ask for extra fee. Please contact with
network provider to acquire more information.
56
10 Text Input
Your phone offers text input modes: Multitap Input (Abc/ABC),
Numbers Input (123), eHiText Input (eng), and Symbol Input (Symbols).
Input mode includes capital letter and lowercase mode.
You can key in letters, digits, characters and symbols when writing
text or editing contact record information in Names or Messages etc.,
following the common instruction in hereinafter table.
Operation Method
Input Letters Multitap (Abc/ABC) Input—“Abc/ABC”,
press corresponding letter key till the letter
appears.
Input Words eHiText Input—“eng”, press any key once
to key in any word.
Input Digits Numbers Input—“123”, press digit key
once.
Input Symbol Symbols Input —Press * key to enter
the symbols mode and press
corresponding digit key.
Or press “1” key till the symbol (common
symbols) appears except for Numbers
Input mode..
57
Input Space Press “0” key, except for being in numbers
mode.
Erase Character Press Right select key .
Move cursor left or
right Press Left/Right key .
Change input mode
Press # key to select another text
mode.
Capitalization
Press# key to switch between
capitalization and lowercase.
10.1 Multitap Input
Select Multitap Input (Abc/ABC) — Each key stands for multiple
letters. Press key till your letter appears. When the cursor moves, enter
the next letter.
10.2 Numbers Input
Select Numbers Input (123) — Press the corresponding key once
to input the number. In Numbers input mode, you can not enter space.
10.3 eHiText Input
Select eHiText Input (eng) — Predictive word input is based on a
built-in dictionary.
One letter asks for pressing only once.
58
Press the digit key corresponding to the letters once till the word
appears on the screen.
If the word displayed is not the word you want, press Up/Down key
to look for another matching word. Then press OK key to confirm.
10.4 Symbols Input
-Press 1 key to input till the symbol appears. Most common
punctuation marks and special characters are available.
Or select Symbols mode by pressing * key :
- Press Up/Down key to page down. And press digit key to enter
corresponding symbol.
Note: in text input, press * key twice will enter set Idiom menu.
59
11 Troubleshooting
If your phone appears following phenomenon in the process of
application, please read following relative information at first. If the
problems still can not be solved, please contact with the distributor or
service provider.
Problem Check Point
When switching on the phone, it
prompts “Enter PIN”.
Please input your PIN Code which
offered with UIM Card together. If
you have changed PIN code,
please input new PIN Code. You
can also set PIN code
deactivated, see “7.4 Security
Settings”.
When switching on the phone, it
prompts “Insert card and restart
phone”.
Please check whether valid UIM
card is inserted or not.
No key beep on pressing keys. Please check the setting of Key
Beep in Settings.
When there is an incoming call,
the prompt ringer not rings.
Please check the setting of sound
Alert Type and ringer Volume in
Settings.
60
No prompt tone at alarm time. Please check relative sound
setting (Alert Type and ringer
Volume in Settings).
Messages cannot be sent. Please check the signal of
network.