ZTE ZXHNF660 GPON ONT User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1606409
Application ID	m/7Yx4arm2m+XSJ5S42z1A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	395.9kB (4948767 bits)
Date Submitted	2011-12-20 00:00:00
Date Available	2011-12-20 00:00:00
Creation Date	2011-10-08 08:58:13
Producing Software	PDFlib+PDI 7.0.4 (Win32)
Document Lastmod	2011-10-08 14:29:56
Document Title	Users Manual
Document Creator	Arbortext 5.4

ZXA10 F660
GPON ONT
User Manual
Version: V1.0
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://ensupport.zte.com.cn
E-mail: support@zte.com.cn
LEGAL INFORMATION
Copyright © 2011 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited.
Additionally, the contents of this document are protected by
contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE
CORPORATION or of their respective owners.
This document is provided “as is”, and all express, implied, or statutory warranties, representations or conditions
are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose,
title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the
use of or reliance on the information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications
covering the subject matter of this document. Except as expressly provided in any written license between ZTE
CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter
herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.
Revision History
Revision No.
Revision Date
Revision Reason
R1.0
2011–07–18
First Edition
Serial Number: SJ-20110718111034-001
Publishing Date: 2011-07-18 (R1.0)
Contents
Preface............................................................................................................. I
Chapter 1 Overview .................................................................................... 1-1
1.1 Product Introduction ........................................................................................... 1-1
1.2 Packing List ....................................................................................................... 1-2
1.3 Features and Specifications ................................................................................ 1-2
1.4 Product Appearance........................................................................................... 1-3
1.5 System Requirements ........................................................................................ 1-6
1.6 System Application Environment ......................................................................... 1-6
Chapter 2 Configuration Preparation ....................................................... 2-1
2.1 Preliminary Setup............................................................................................... 2-1
2.2 Configuring TCP/IP ............................................................................................ 2-1
2.3 Logging In to the Device ..................................................................................... 2-6
Chapter 3 Device Status ............................................................................ 3-1
3.1 Device Information ............................................................................................. 3-1
3.2 Network Connection Information.......................................................................... 3-2
3.3 User Interface Information................................................................................... 3-3
3.3.1 WLAN Interface Information ...................................................................... 3-3
3.3.2 Ethernet Interface Information ................................................................... 3-4
3.3.3 VoIP Status Information ............................................................................ 3-5
Chapter 4 Network Configuration ............................................................. 4-1
4.1 Configuring WAN Connection.............................................................................. 4-1
4.2 WLAN Configuration........................................................................................... 4-5
4.2.1 Configuring Basic WLAN Parameters ........................................................ 4-5
4.2.2 Configuring Multi-SSID Parameters ........................................................... 4-7
4.2.3 Configuring Security Properties ................................................................. 4-8
4.2.4 Viewing Associated Devices ................................................................... 4-12
4.3 Address Management Configuration.................................................................. 4-13
4.3.1 Configuring DHCP Server ....................................................................... 4-13
4.3.2 Configuring DHCP Binding...................................................................... 4-15
4.3.3 Configuring Specific Address Range........................................................ 4-16
4.4 Route Management Configuration ..................................................................... 4-17
4.4.1 Configuring Default Gateway................................................................... 4-17
4.4.2 Configuring Static Routing ...................................................................... 4-18
Chapter 5 Security Configuration ............................................................. 5-1
5.1 Configuring Firewall............................................................................................ 5-1
5.2 Configuring IP Filter............................................................................................ 5-2
5.3 Configuring URL Filter ........................................................................................ 5-5
5.4 Configuring DMZ Host ........................................................................................ 5-7
5.5 Configuring Port Forwarding ............................................................................... 5-9
Chapter 6 Service Configuration............................................................... 6-1
6.1 SIP VoIP Service Configuration ........................................................................... 6-1
6.1.1 Configuring VoIP WAN Connection............................................................ 6-1
6.1.2 Configuring SIP........................................................................................ 6-2
6.1.3 Configuring SIP Accounts ......................................................................... 6-4
6.1.4 Configuring VoIP Advanced Parameters .................................................... 6-5
6.1.5 Configuring VoIP Media Parameters .......................................................... 6-7
6.1.6 Configuring Fax........................................................................................ 6-8
6.2 Configuring DDNS............................................................................................ 6-10
6.3 Configuring UPnP .............................................................................................6-11
6.4 DNS Configuration ........................................................................................... 6-13
6.4.1 Configuring Domain Name ...................................................................... 6-13
6.4.2 Configuring Host Name .......................................................................... 6-14
6.5 QoS Configuration............................................................................................ 6-16
6.5.1 Configuring Basic QoS Parameters ......................................................... 6-16
6.5.2 Configuring QoS Rule............................................................................. 6-19
6.5.3 Configuring QoS Rule Type..................................................................... 6-20
6.5.4 Configuring QoS Local Application .......................................................... 6-22
6.5.5 Configuring QoS Queue Management ..................................................... 6-23
6.5.6 Configuring QoS Ingress Rate Limit......................................................... 6-25
6.6 Configuring SNTP Client................................................................................... 6-26
6.7 IGMP Configuration .......................................................................................... 6-28
6.7.1 Configuring Basic IGMP Parameters ....................................................... 6-28
6.7.2 Configuring Multicast VLAN .................................................................... 6-31
6.7.3 Configuring Multicast MAC Limit.............................................................. 6-32
6.7.4 Configuring MVLAN Tag Strip.................................................................. 6-34
6.8 Configuring FTP Application.............................................................................. 6-36
Chapter 7 Device Management ................................................................. 7-1
7.1 TR069 Configuration .......................................................................................... 7-1
7.1.1 Configuring Basic TR069 Parameters ........................................................ 7-1
7.1.2 Importing TRO69 Certificate...................................................................... 7-3
II
7.2 User Management.............................................................................................. 7-4
7.3 Device Management........................................................................................... 7-5
7.3.1 System Management................................................................................ 7-5
7.3.2 Software Upgrade .................................................................................... 7-6
7.3.3 Configuration Management ....................................................................... 7-8
7.4 Log Management ............................................................................................... 7-9
7.5 Ping Diagnosis ................................................................................................. 7-10
Chapter 8 FAQ............................................................................................. 8-1
8.1 FAQ .................................................................................................................. 8-1
Glossary .......................................................................................................... I
III
IV
Preface
Purpose
This manual provides procedures and guidelines that support the operation on the ZXA10
F660 Optical Network Terminal (ZXA10 F660 for short).
Intended Audience
This manual is intended for engineers and technicians who perform operation activities on
ZXA10 F660.
Prerequisite Skill and Knowledge
To use this manual effectively, users should have a general understanding of wireless
telecommunications technology. Familiarity with the following is helpful:
ZXA10 system and its various components
Local operating procedures
What Is in This Manual
This manual contains the following chapters:
Chapter Summary
Chapter
Summary
Chapter 1, Overview
Provides an overview of the product, including
the packing list, product features, appearance,
and system requirements, and system application
environment.
Chapter 2, Configuration Preparation
Describes the procedures for configuring TCP/IP,
and logging in to the device.
Chapter 3, Device Status
Describes the device information, network
connection information, and user interface
information.
Chapter 4, Network Configuration
Describes the configuration of WAN connection,
WLAN, address management, and route
management.
Chapter 5, Security Configuration
Describes the procedures for configuring the
firewall, IP filter, URL filter, DMZ, and port
forwarding.
Chapter
Summary
Chapter 6, Service Configuration
Describes the configuration of VoIP, DDNS,
UPnP, DNS server, QoS, SNTP client, IGMP, and
FTP application.
Chapter 7, Device Management
Describes TRO69 configuration, user
management, device management, log
management, and ping diagnosis.
Chapter 8, FAQ
Provides the FAQs and solutions.
Related Documentation
None
Conventions
ZTE documents employ the following typographical conventions.
Typographical Conventions
Typeface
Meaning
Italics
References to other Manuals and documents.
“Quotes”
Links on screens.
Bold
Menus, menu options, function names, input
fields, radio button names, check boxes,
drop-down lists, dialog box names, window
names.
CAPS
Keys on the keyboard and buttons on screens
and company name.
Constant width
Text that you type, program code, files and
directory names, and function names.
[]
Optional parameters
{}
Mandatory parameters
Select one of the parameters that are delimited
by it.
Note: Provides additional information about a
certain topic.
Note:
Checkpoint: Indicates that a particular step needs
to be checked before proceeding further.
Checkpoint:
II
Typeface
Meaning
Tip: Indicates a suggestion or hint to make things
easier or more productive for the reader.
Tip:
Mouse Operation Conventions are as follows:
Mouse Operation Conventions
Typeface
Meaning
Click
Refers to clicking the primary mouse button
(usually the left mouse button) once.
Double-click
Refers to quickly clicking the primary mouse
button (usually the left mouse button) twice.
Right-click
Refers to clicking the secondary mouse button
(usually the right mouse button) once.
Drag
Refers to pressing and holding a mouse button
and moving the mouse.
How to Get in Touch
The following sections provide information on how to obtain support for the documentation
and the software.
Customer Support
If you have problems, questions, comments, or
suggestions regarding your product, contact us by
e-mail at support@zte.com.cn. You can also call our
customer support center at (86) 755 26771900 and (86)
800-9830-9830.
Documentation Support
ZTE welcomes your comments and suggestions on
the quality and usefulness of this document.
For
further questions, comments, or suggestions on the
documentation, you can contact us by e-mail at
doc@zte.com.cn; or you can fax your comments and
suggestions to (86) 755 26772236. You can also browse
our website at http://ensupport.zte.com.cn, which contains
various interesting subjects like documentation, knowledge
base, forum and service request.
Declaration of RoHS Compliance
To minimize the environmental impact and take more responsibility to the earth we
live, this document shall serve as formal declaration that ZXA10 F660 manufactured by
ZTE CORPORATION is in compliance with the Directive 2002/95/EC of the European
III
Parliament - RoHS (Restriction of Hazardous Substances) with respect to the following
substances:
Lead (Pb)
Mercury (Hg)
Cadmium (Cd)
Hexavalent Chromium (Cr (VI))
PolyBrominated Biphenyls (PBB's)
PolyBrominated Diphenyl Ethers (PBDE's)
This declaration is issued based on our current level of knowledge. Since conditions of use are
outside our control, ZTE CORPORATION makes no warranties, express or implied, and assumes no
liability in connection with the use of this information.
IV
Chapter 1
Overview
Table of Contents
Product Introduction ...................................................................................................1-1
Packing List................................................................................................................1-2
Features and Specifications .......................................................................................1-2
Product Appearance...................................................................................................1-3
System Requirements ................................................................................................1-6
System Application Environment ................................................................................1-6
1.1 Product Introduction
ZXA10 F660 is a user-side access device module. It uses the computer network
technology and broadband optical network technology to establish a home network center
for the access of network devices. It provides users with various services.
Table 1-1 lists the ports and functions of ZXA10 F660 series products.
Table 1-1 ZXA10 F660 Ports and Functions
Product
Port
Function
ZXA10 F660
Four GE ports, two POTS ports,
Supports Internet access, IPTV,
one Wi-Fi port, and two USB
VoIP, and Wi-Fi. It can be used
2.0 ports
as a home gateway.
Four GE ports, two POTS ports,
Supports Internet access, IPTV,
one Wi-Fi port, two USB 2.0
VoIP, Wi-Fi, and CATV. It can be
ports, and one CATV port
used as a home gateway.
Four GE ports and two USB 2.0
Supports Internet access and
ports
IPTV.
Four GE ports, two POTS ports,
Supports Internet access, IPTV,
and one Wi-Fi port
VoIP, and Wi-Fi. It can be used
ZXA10 F668
ZXA10 F600G
ZXA10 F627
as a home gateway.
ZXA10 F625G
Four GE ports, two POTS port
Supports Internet access, IPTV,
and one CATV port
VoIP, and CATV. It can be used
as a home gateway.
ZXA10 F607
Four GE ports and one Wi-Fi
Supports Internet access, IPTV,
port
and Wi-Fi. It can be used as a
home gateway.
1-1
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
1.2 Packing List
Make sure that ZXA10 F660 package contains the following:
One ZXA10 F660 host
One AC-DC adaptor
One RJ-45 straight-through cable
Two RJ-11 telephone cables
One ZXA10 F660 Optical Network Terminal User Manual
If any of the above contents is missing or damaged, please contact your dealer. Keep the
packing box and components for the replacement purpose.
1.3 Features and Specifications
System Features
ZXA10 F660 has the following features:
MAC cache: 4K
Multicast services: 1024 multicast groups
VLAN range: 1 - 4095
GEM ports: 256
T-CONTs: 40
Interface Features
The interface features are as follows:
GPON interface: complies with the PON standard and SC/APC, in compliance with
ITU G.984.1 - G.984.5 standards
Ethernet interface: 10/100/1000 Mbps GE interfaces (RJ-45), in compliance with IEEE
802.3 and IEEE 802.3u standards
POTS interface: RJ-11
WLAN interface: complying with the IEEE 802.11n standard with built-in antenna
Technical Features
ZXA10 F660 implements data access and IP voice access.
For data access, ZXA10 F660 implement L2 data switching and forwarding.
By working with relevant network devices through signaling protocols such as H.248
and SIP, ZXA10 F660 implements IP voice function.
ZXA10 F660 provides the security, QoS, and network management functions, such
as multi-level authentication based on devices, users, and services.
It supports data channel encryption, implementation of QoS requirements matching
the local devices and network according to services with different requirements, and
network management based on various management modes.
1-2
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 1 Overview
Certification Features
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
RF exposure information: The Maximum Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm between the device and the human body.
To maintain compliance with RF exposure requirement, use product that maintain a 20cm
distance between the device and human body.
Note:
Changes or modifications made to this equipment not expressly approved by
(ZTE Corporation) may void the FCC authorization to operate this equipment.
Product Specifications
ZXA10 F660 specifications are as follows:
Rated current: 1.3 A
Rated voltage: 12 V DC
Operating temperature: -5℃ - 50℃
Operating humidity: 5% - 95%
Dimensions: 260 mm x 50 mm x 185 mm (Width x Height x Depth)
1.4 Product Appearance
Front Panel
Figure 1-1 shows the front panel of ZXA10 F660.
Figure 1-1 Front Panel
Table 1-2 lists LEDs on the front panel.
1-3
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Table 1-2 Front Panel LEDs
LED
Status
Description
PON
Green, ON
The ONT GPON is registered
and the link is activated.
OFF
The ONT is not discovered and
registered.
Flashing
The ONT is trying to be
registered or set up the
connection.
LOS
Red, ON
The ONU receives the optical
power abnormally.
OFF
The ONU receives the optical
power normally.
The IP address for the WAN
connection is obtained.
Flashing
Fails to obtain the IP address
for the WAN connection.
WLAN
Green, ON
The WLAN function is enabled.
OFF
The device is not powered
ON or the wireless interface is
disabled.
POTS1 POTS2
Green, ON
The device is registered on
the SS, but no data is being
transmitted.
OFF
The device is not powered ON
or fails to be registered on the
SS.
Power indicator
Flashing
Data is being transmitted.
Blue, ON
The device is powered ON
normally.
LAN1 - LAN4
OFF
The device is not powered ON.
Green, ON
The network interface is
connected, but no data is being
transmitted.
OFF
The device is not powered
ON or the network interface is
not connected with a network
device.
Flashing
Data is being transmitted.
1-4
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 1 Overview
Back Panel
Figure 1-2 shows the back panel.
Figure 1-2 Back Panel
Table 1-3 lists the interfaces and buttons on the back panel.
Table 1-3 Interfaces and Buttons on the Back Panel
Interface/Button
Description
LAN1 - LAN4
RJ-45 LAN interface, connects to the local
network through the RJ-45 network cable
POTS1 POTS2
RJ-11 telephone interface, connects to the
telephone through the RJ-11 telephone cable
USB
USB interface, connects to a storage device or
printer that has a USB interface
UPS
Secondary power monitoring interface
POWER
Power socket, connects to the power adapter, 12
V DC
WPS
WPS access switch
WLAN
WLAN button, to enable or disable WLAN
RESET
When the device is powered ON, press the button
for more than 5 seconds to restore the factory
default settings.
Side Panel
The side panel has an SC/APC single-mode fiber interface, implementing the services
provided by the ISP in PON access mode. It connects to the GPON interface of ZXA10
F660 through an SC/APC single-mode fiber. Figure 1-3 shows the side panel.
1-5
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Figure 1-3 Side Panel
1.5 System Requirements
The ZXA10 F660 system requirements are as follows:
An ISP is needed so that the device can access the services provided by the ISP
through the PON access mode.
A computer that is installed with a 10 Mbps/100 Mbps/1000 Mbps Ethernet card is
needed.
If necessary, create a medium and small LAN by adding Ethernet hubs and cables.
To use wireless access, an 802.11g/b wireless network card or a built-in 802.11g/b
wireless network card is required.
The computer that accesses the network should be installed with Windows
98/Me/2000/NT/XP/Vista/7 or Linux, network card driver program, and TCP/IP
protocol, and its network settings are correct.
A computer in the LAN is installed with a Web browser, such as Microsoft Internet
Explorer 6.0 or higher, Netscape Communicator 4.0 or higher.
1.6 System Application Environment
ZXA10 F660 is an indoor device of ZTE series optical network terminal equipment. It works
with the PON device to implement the FTTH application.
With the use of multiple user interfaces, hub, or Ethernet switch, ZXA10 F660 can
implement the FTTO/B application.
Figure 1-4 shows the ZXA10 F660 application environment.
1-6
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 1 Overview
Figure 1-4 System Application Environment
As an indoor device, ZXA10 F660 can be put on the desk with the base or hung on the
wall without the base.
Figure 1-5 shows the ZXA10 F660 on a wall.
Figure 1-5 F66x Wall-Mount
1-7
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
This page intentionally left blank.
1-8
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 2
Configuration Preparation
Table of Contents
Preliminary Setup .......................................................................................................2-1
Configuring TCP/IP ....................................................................................................2-1
Logging In to the Device.............................................................................................2-6
2.1 Preliminary Setup
Generally, the ISP has already configured the device. The user can directly use it after
hardware connection. However, the user may need to configure the device in some special
situations. The user must confirm the following preliminary setups:
Use one crossover or straight-through Ethernet cable to connect a computer to the
device.
Check the TCP/IP settings of the computer.
Disable any running firewall or security software.
Disable the proxy server of the Internet Explorer.
Consult the ISP if some data from the ISP is needed.
2.2 Configuring TCP/IP
Short Description
Perform this procedure to configure TCP/IP of a computer connected to the ZXA10 F660.
Context
This instance takes Windows XP as an example.
The default network settings for the ZXA10 F660 are as follows:
IP address: 192.168.1.1
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1
To configure TCP/IP, perform the following steps:
Steps
1. Choose Start > Settings > Network Connections to open the Network Connections
window.
2-1
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
2. Double-click Local Area Connection to open the Local Area Connection Status
dialog box, as shown in Figure 2-1.
Figure 2-1 Local Area Connection Status
3. Click Properties in the General tab to open the Local Area Connection Properties
dialog box.
4. Select Internet Protocol (TCP/IP), as shown in Figure 2-2.
2-2
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 2 Configuration Preparation
Figure 2-2 Local Area Connection Properties
5. Click Properties to open the Internet Protocol (TCP/IP) Properties dialog box.
Select Use the following IP address and specify the IP address, Subnet mask,
and Default gateway. For example, you can set the IP address to 192.168.1.7,
Subnet mask to 255.255.255.0, and Default gateway to 192.168.1.1, as
shown in Figure 2-3.
2-3
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Figure 2-3 Specifying the IP address in the Internet Protocol (TCP/IP) Properties
Note:
The IP address shall be in the same network segment as LAN port address of the
device, which means the IP address you type in should be “192.168.1.x” (x can be any
value from 2 to 254).
6. Click OK to save your settings.
Note:
If you are accessing the WEB page of the device for the first time, please configure
the device as you are told.
– End of Steps –
2-4
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 2 Configuration Preparation
Follow-Up Action
1. Choose Start > Run to open the Run dialog box.
2. Type CMD in the Open text box, and click OK.
3. Type ping 192.168.1.1 in the pop-up window and press Enter to carry out the ping
command.
l If the command window displays the messages, as shown in Figure 2-4, it
indicates that the communication between your PC and the device is normal and
you are able to access the Internet now.
Figure 2-4 Successful Ping Message
If the command window displays the messages, as shown in Figure 2-5, it
indicates that the communication between your PC and the device fails.
Figure 2-5 Failed Ping Message
If the communication between your PC and the device fails, ensure the following items:
2-5
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
The Ethernet cable between the device and your PC has been connected properly.
The driver of your network adapter has been installed properly.
The TCP/IP setting has been configured correctly on your PC.
If the ZXA10 F660 IP address is 192.168.1.1, the IP address of the computer must
be from 192.168.1.2 to 192.168.1.254. The subnet mask must be 255.255.255.0
and the default gateway must be 192.168.1.1.
2.3 Logging In to the Device
Short Description
Perform this procedure to log in to the device.
Prerequisites
The device is properly connected and the computer is correctly configured.
Context
To log in to the device, perform the following steps:
Steps
1. Open the Internet Explorer. Enter http://192.168.1.1 (default IP address of the
device) on the address bar and press Enter. The login dialog box is displayed, as
shown in Figure 2-6.
Figure 2-6 Login
2. Enter the Username and Password (by default, both are admin ). Click Login.
– End of Steps –
Result
Logging in to the device is successful.
2-6
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 3
Device Status
Table of Contents
Device Information .....................................................................................................3-1
Network Connection Information.................................................................................3-2
User Interface Information ..........................................................................................3-3
3.1 Device Information
On the Web interface of the device, click the Status tab. By default, the Device
Information is selected. The right pane displays the device type, serial number, and
version information, and registration password, as shown in Figure 3-1.
Figure 3-1 Device Information
Table 3-1 lists the parameters for the device information.
Table 3-1 Device Information Parameters
Parameter
Description
Model
Device type
Serial Number
Device serial number
Hardware Version
Hardware version number
Software Version
Software version number
Boot Loader Version
Boot version number
PON Serial Number
PON serial number
3-1
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Parameter
Description
Password
Password used by the ONU registration on the
OLT
3.2 Network Connection Information
On the Status tab, select Network Interface. By default, the WAN Connection sub-node
is selected. The right pane displays the WAN connection information, as shown in Figure
3-2.
Click Refresh to view the latest information.
Figure 3-2 WAN Connection
Table 3-2 lists the parameters for the network connection information.
Table 3-2 Parameters for the Network Connection Information
Parameter
Description
omci1
WAN connection type
VLAN ID
VLAN ID used by the WAN interface to send and receive data
NAT
Whether to enable the NAT function
IP
IP address used by ZXA10 F660
DNS
DNS used by ZXA10 F660
Default Gateway
Gateway used by ZXA10 F660
Connection Status
WAN connection status
3-2
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 3 Device Status
Note:
OMCI1 is the WAN connection name, which is created by the OMCI interface remotely.
3.3 User Interface Information
This topic includes the following:
WLAN Interface Information
Ethernet Interface Information
VoIP Status Information
3.3.1 WLAN Interface Information
On the Status tab, select User Interface. By default, WLAN is selected. The right pane
displays the WLAN switch information, packet receiving and sending information, and
authentication information, as shown in Figure 3-3.
Click Refresh to view the latest information.
Figure 3-3 WLAN Interface Information
Table 3-3 lists the parameters for the WLAN interface information.
3-3
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Table 3-3 Parameters for the WLAN Interface Information
Parameter
Description
Enable Wireless RF
Whether to enable the wireless RF
Channel
Channel
SSID1 Enable
Whether to enable the wireless network SSID1
SSID1 Name
SSID1 name, which identifies the wireless network
service area
Authentication Type
Authentication mode
Encryption Type
Encryption mode
MAC Address
MAC address
Packets Received/Bytes Received
Number of received packets or bytes
Packets Sent/Bytes Sent
Number of sent packets or bytes
Error Packets Received
Error packets received
Error Packets Sent
Error packets sent
Discarded Receiving Packets
Discarded receiving packets
Discarded Sending Packets
Discarded sending packets
3.3.2 Ethernet Interface Information
On the Status tab, select User Interface. Select Ethernet. The right pane displays the
packet receiving and sending information on the Ethernet interface, as shown in Figure
3-4.
Click Refresh to view the latest information.
3-4
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 3 Device Status
Figure 3-4 Ethernet Interface Information
Table 3-4 lists the parameters for the Ethernet interface information.
Table 3-4 Parameters for the Ethernet Interface Information
Parameter
Description
Ethernet Port
Port name
Packets Received/Bytes Received
Number of received packets or bytes
Packets Sent/Bytes Sent
Number of sent packets or bytes
Error Frames
Ethernet error frames
3.3.3 VoIP Status Information
On the Status tab, select User Interface. Select VoIP Status. The right pane displays
the VoIP status information, as shown in Figure 3-5.
Click Refresh to view the latest information.
3-5
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Figure 3-5 VoIP Status Information
Table 3-5 lists the parameters for the VoIP status information.
Table 3-5 Parameters for the VoIP Status Information
Parameter
Description
SIP Account Username
Telephone number
SIP Register Status
Registration status of the voice service
3-6
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 4
Network Configuration
Table of Contents
Configuring WAN Connection .....................................................................................4-1
WLAN Configuration...................................................................................................4-5
Address Management Configuration ........................................................................4-13
Route Management Configuration ............................................................................4-17
4.1 Configuring WAN Connection
Short Description
Perform this procedure to configure the WAN connection.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure the WAN connection, perform the following steps:
Steps
1. On the Web interface of the device, click the Network tab.
Connection is selected, as shown in Figure 4-1.
By default, WAN
Figure 4-1 WAN Connection
4-1
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
2. The connection type can be PPPoE, Static, or DHCP.
a. Configure the PPPoE mode.
Select PPPoE for Type, as shown in Figure 4-2.
Figure 4-2 PPPoE Mode Configuration
Table 4-1 lists the parameters for the PPPoE mode configuration.
Table 4-1 Parameters for PPPoE Mode Configuration
Parameter
Description
Type
Connection mode
Connection Name
PPPoE connection name, automatically generated
by the system
Enable NAT
Whether to enable the NAT function
Service List
Service modes supported by the system:
TR069 service mode
Remote maintenance and management mode
Internet service mode
Broadband and IPTV service mode
VoIP service mode
Voice service mode
VLAN ID
VLAN ID
Username
User name, used by the device authentication on
interworking
Password
Password, used by the device authentication on
interworking
Authentication Type
Authentication type, the same as the authentication
type for the uppper-layer device
4-2
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 4 Network Configuration
Parameter
Description
Connection Trigger
Dial-up connection mode:
Idle Timeout
Always On
On Demand
Manual
Idle time before the dial-up auto disconnection,
available only in On Demand mode
b. Configure the static mode.
Select Static for Type, as shown in Figure 4-3.
Figure 4-3 Static Mode Configuration
Table 4-2 lists the parameters for the static mode configuration.
Table 4-2 Static Mode Configuration
Parameter
Description
Type
Connection mode
Connection Name
Static connection name, automatically generated
by the system
Enable NAT
Whether to enable the NAT function
Service List
Service modes supported by the system:
TR069 service mode
Remote maintenance and management mode
Internet service mode
VoIP service mode
Broadband and IPTV service mode
Voice service mode
4-3
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Parameter
Description
VLAN ID
VLAN ID
IP Address
IP address used by ZXA10 F660
Subnet Mask
Subnet mask used by ZXA10 F660
Default Gateway
Gateway used by ZXA10 F660
DNS Server1 IP Address
IP address of DNS1 used by ZXA10 F660
DNS Server2 IP Address
IP address of DNS2 used by ZXA10 F660
DNS Server3 IP Address
IP address of DNS3 used by ZXA10 F660
c. Configure the DHCP mode.
Select DHCP for Type, as shown in Figure 4-4.
Figure 4-4 DHCP Mode Configuration
Table 4-3 lists the parameters for the DHCP mode configuration.
Table 4-3 DHCP Mode Configuration
Parameter
Description
Type
Connection mode
Connection Name
DHCP connection name, automatically generated
by the system
Enable NAT
Whether to enable the NAT function
Service List
Service modes supported by the system:
TR069 service mode
Remote maintenance and management mode
Internet service mode
Broadband and IPTV service mode
VoIP service mode
Voice service mode
VLAN ID
VLAN ID
4-4
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 4 Network Configuration
3. Click Create to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
WAN connection configuration is complete.
4.2 WLAN Configuration
This topic includes the following:
Configuring Basic WLAN Parameters
Configuring Multi-SSID Parameters
Configuring Security Properties
Viewing Associated Devices
4.2.1 Configuring Basic WLAN Parameters
Short Description
Perform this procedure to configure the basic WLAN parameters.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure the basic WLAN parameters, perform the following steps:
Steps
1. On the Network tab, select WLAN on the left pane. By default, the Basic sub-node
is selected, as shown in Figure 4-5.
4-5
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Figure 4-5 Basic WLAN Configuration
2. Configure the basic WLAN parameters, as listed in Table 4-4.
Table 4-4 Basic WLAN Parameters
Parameter
Description
Enable Wireless RF
Whether to enable wireless RF
Mode
Wireless communication mode
Country/Region
Country or region name
Channel
Wireless channel number
Select a proper channel according to the country code
Beacon Interval
Beacon interval
Tx Rate
Data transmission rate
A low data transmission rate can enlarge the wireless
communication area.
Transmitting Power
Transmission power
QoS Type
QoS priority type
RTS Threshold
RTS threshold
DTIM Interval
DTIM interval
Fragment Threshold
Fragment threshold
If a packet size exceeds this threshold, the packet is divided into
several fragments for transmission.
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
4-6
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 4 Network Configuration
Result
The basic WLAN parameters are configured.
4.2.2 Configuring Multi-SSID Parameters
Short Description
Perform this procedure to configure multi-SSID parameters.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure multi-SSID parameters, perform the following steps:
Steps
1. On the Network tab, click WLAN on the left pane. Select Multi-SSID Settings, as
shown in Figure 4-6.
Figure 4-6 Multi-SSID Settings
2. Configure the multi-SSID parameters as shown in Table 4-5.
Table 4-5 Multi-SSID Parameters
Parameter
Description
Choose SSID
Choose the SSID that needs to be configured.
Hide SSID
Disable or enable SSID broadcast.
Enable SSID
Enable the SSID.
4-7
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Parameter
Description
SSID Name
SSID name. It cannot exceed 32 characters and is case sensitive. It is
used to control the WLAN access. The SSID name must match all the
SSIDs of the related access nodes; otherwise, the device cannot be
accessed. Up to four WLAN sub-ports are supported.
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
The multi-SSID parameters are configured.
4.2.3 Configuring Security Properties
Short Description
Perform this procedure to configure the security properties.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure the security properties, perform the following steps:
Steps
1. On the Network tab, select WLAN, and then select Security, as shown in Figure 4-7.
Figure 4-7 Security Properties
SSID supports four authentication modes: Open System, Shared Key, WPA-PSK,
and WPA2-PSK.
4-8
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 4 Network Configuration
2. From the Choose SSID drop-down list, select an SSID.
a. In Authentication Type, select Open System, and then enable WEP Encryption
(by default, it is disabled). The Open System configuration information is
displayed, as shown in Figure 4-8.
Figure 4-8 Open System Configuration
Table 4-6 lists the parameters for the Open System authentication mode.
Table 4-6 Parameters for Open System Authentication Mode
Parameter
Description
Choose SSID
Current SSID
Authentication Type
Current SSID authentication mode
WEP Encryption
To enable or disable WEP encryption
WEP Encryption
WEP encryption length
Level
The 128–bit encryption can be a 13–bit ASCII codes or a 26–bit
hexadecimal number.
The 64–bit encryption can be a 5–bit ASCII code or a 10–bit
hexadecimal number.
Generally, the 64–bit encryption can meet the user requirements. To
enhance security, use the 128–bit encryption.
WEP Key Index
Current encryption value
WEP Key1
WEP encryption value
Range: 5–bit ASCII code or 10–bit hexadecimal number
WEP Key2
WEP encryption value
Range: 5–bit ASCII code or 10–bit hexadecimal number
4-9
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Parameter
Description
WEP Key3
WEP encryption value
Range: 5–bit ASCII code or 10–bit hexadecimal number
WEP Key4
WEP encryption value
Range: 5–bit ASCII code or 10–bit hexadecimal number
b. In Authentication Type, select Shared Key. By default, WEP Encryption is
enabled. The Shared Key configuration information is displayed, as shown in
Figure 4-9.
Figure 4-9 Shared Key Configuration
Table 4-7 lists the parameters for the Shared Key authentication mode.
Table 4-7 Parameters for Shared Key Authentication Mode
Parameter
Description
Choose SSID
Current SSID
Authentication Type
Current SSID authentication mode
WEP Encryption
To enable or disable WEP encryption
WEP Encryption
WEP encryption length
Level
The 128–bit encryption can be a 13–bit ASCII codes or a 26–bit
hexadecimal number.
The 64–bit encryption can be a 5–bit ASCII code or a 10–bit
hexadecimal number.
Generally, the 64–bit encryption can meet the user requirements. To
enhance security, use the 128–bit encryption.
WEP Key Index
Current encryption value
4-10
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 4 Network Configuration
Parameter
Description
WEP Key1
WEP encryption value
Range: 5–bit ASCII code or 10–bit hexadecimal number
WEP Key2
WEP encryption value
Range: 5–bit ASCII code or 10–bit hexadecimal number
WEP Key3
WEP encryption value
Range: 5–bit ASCII code or 10–bit hexadecimal number
WEP Key4
WEP encryption value
Range: 5–bit ASCII code or 10–bit hexadecimal number
c. In Authentication Type, select WPA-PSK. The WPA-PSK configuration
information is displayed, as shown in Figure 4-10.
Figure 4-10 WPA-PSK Configuration
Table 4-8 lists the parameters for the WPA-PSK authentication mode.
Table 4-8 Parameters for WPA-PSK Authentication Mode
Parameter
Description
Choose SSID
Current SSID
Authentication Type
Current SSID authentication mode
WPA Passphrase
WPA pre-shared key
Range: 8 – 63 characters
WPA Group Key Update Interval
Update interval of the WPA group key
WPA Encryption Algorithm
WPA encryption algorithm
4-11
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Note:
The configuration method for the WPA2-PSK authentication mode is the same as
that for the WPA-PSK authentication mode.
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
The security properties are configured.
4.2.4 Viewing Associated Devices
Short Description
Perform this procedure to view the associated devices.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To view the associated devices, perform the following steps:
Steps
1. On the Network tab, select WLAN, and then select Associated Device, as shown in
Figure 4-11.
Figure 4-11 Associated Device
4-12
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 4 Network Configuration
2. Select SSID, and then click Refresh to view the MAC addresses of the associated
devices.
– End of Steps –
Result
The associated devices are listed.
4.3 Address Management Configuration
This topic includes the following:
Configuring DHCP Server
Configuring DHCP Binding
Configuring Specific Address Range
4.3.1 Configuring DHCP Server
Short Description
Perform this procedure to configure the DHCP server.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure the DHCP server, perform the following steps:
Steps
1. On the Network tab, select Address Management. By default, DHCP Server is
selected, as shown in Figure 4-12.
4-13
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Figure 4-12 DHCP Server
2. On the DHCP Server tab, configure the parameters, as listed in Table 4-9.
Table 4-9 Parameters for DHCP Server Configuration
Parameter
Description
LAN IP Address
IP address of the LAN group (interface subnet)
Subnet Mask
Subnet mask of the LAN group
Enable DHCP Server
To enable or disable the DHCP server
DHCP Start IP Address
Starting IP address allocated by the DHCP server
DHCP End IP Address
Ending IP address allocated by the DHCP server
DNS Server1 IP Address
IP address of the DNS server
DNS Server2 IP Address
IP address of the DNS server
DNS Server3 IP Address
IP address of the DNS server
Default Gateway
IP address of the default gateway
Lease Time
Lease time of the IP address by the DHCP server
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
The DHCP server is configured.
4-14
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 4 Network Configuration
4.3.2 Configuring DHCP Binding
Short Description
Perform this procedure to configure the DHCP binding.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure the DHCP binding, perform the following steps:
Steps
1. On the Network tab, select Address Management, and then select DHCP Binding,
as shown in Figure 4-13.
Figure 4-13 DHCP Binding
2. Configure binding between the MAC address and IP address. Create a DHCP binding
table to map the client MAC address to the IP address.
The DHCP server allocates IP addresses according to the binding relations, and the
binding relations do not expire.
For example, if the MAC address is set to 00-0a-e2-c6-48-ba and the IP address
is set to 192.168.1.113, it indicates that the DHCP server allocates the IP address
192.168.1.113 to the host which the MAC address corresponds to.
Note:
The IP address belongs to the address pool that is provided by the DHCP server in
the LAN group.
4-15
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
3. Click Add to finish the configuration. Click Modify to modify the configuration. Click
Delete to delete the configuration.
– End of Steps –
Result
DHCP binding is configured.
4.3.3 Configuring Specific Address Range
Short Description
Perform this procedure to configure the specific address range.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure the special address range, perform the following steps:
Steps
1. On the Network tab, select Address Management, and then select Specific Address
Range, as shown in Figure 4-14.
Figure 4-14 Specific Address Range
2. Click Modify to modify the parameters, as shown in Figure 4-15.
4-16
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 4 Network Configuration
Figure 4-15 Specific Address Range Configuration
3. In Start IP Address and End IP Address, enter the IP addresses, and then click
Modify.
– End of Steps –
Result
The specific address range is configured.
4.4 Route Management Configuration
This topic includes the following:
Configuring Default Gateway
Configuring Static Routing
4.4.1 Configuring Default Gateway
Short Description
Perform this procedure to configure the default gateway.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure the default gateway, perform the following steps:
Steps
1. On the Network tab, select Routing Management. By default, Default Gateway is
selected, as shown in Figure 4-16.
4-17
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Figure 4-16 Default Gateway
2. From WAN Connection, select the connection interface at the WAN side.
Note:
This interface is available when configured on WAN Connection.
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
The default gateway is configured.
4.4.2 Configuring Static Routing
Short Description
Perform this procedure to configure the static routing.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure the static routing, perform the following steps:
Steps
1. On the Network tab, select Routing Management, and then select Static Routing,
as shown in Figure 4-17.
4-18
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 4 Network Configuration
Figure 4-17 Static Routing
Table 4-10 lists the parameters for static routing configuration.
Table 4-10 Parameters for Static Routing Configuration
Parameter
Description
WAN Connection
Network-side interface type
Network Address
Network address
Subnet Mask
Subnet mask
Default Gateway
Gateway
2. From the WAN Connection drop-down list, select the network-side interface.
3. Configure Network Address, Subnet Mask, and Default Gateway, as shown in
Figure 4-18.
Figure 4-18 Static Routing Configuration
4. Click Add to finish the configuration, as shown in Figure 4-19. Click Modify to modify
the configuration. Click Delete to delete the configuration.
4-19
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Figure 4-19 Static Routing Configuration Completed
– End of Steps –
Result
The static routing is configured.
4-20
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 5
Security Configuration
Table of Contents
Configuring Firewall....................................................................................................5-1
Configuring IP Filter....................................................................................................5-2
Configuring URL Filter ................................................................................................5-5
Configuring DMZ Host ................................................................................................5-7
Configuring Port Forwarding.......................................................................................5-9
5.1 Configuring Firewall
Short Description
Perform this procedure to configure the firewall.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure the firewall, perform the following steps:
Steps
1. On the Web interface, click the Security tab. By default, Firewall is selected, as
shown in Figure 5-1.
Figure 5-1 Firewall Configuration
2. Set the firewall parameters, as listed in Table 5-1.
5-1
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Table 5-1 Firewall Parameters
Parameter
Description
Enable Anti-Hacking Protection
To enable or disable anti-hacking protection
Firewall Level
Firewall level
High: Allow legal WAN-side access but
prohibit WAN-side ping.
Low: Allow legal WAN-side access and
WAN-side ping.
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
The firewall is configured.
5.2 Configuring IP Filter
Short Description
Perform this procedure to configure IP filter.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure IP filter, perform the following steps:
Steps
1. On the Security tab, select IP Filter, as shown in Figure 5-2.
5-2
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 5 Security Configuration
Figure 5-2 IP Filter
Table 5-2 lists the parameters for IP filter configuration.
Table 5-2 Parameters for IP Filter Configuration
Parameter
Description
Enable
To enable the IP filter function
Protocol
Protocol
Name
Name
Start Source IP Address
Starting source IP address
End Source IP Address
Ending source IP address
Start Destination IP Address
Starting destination IP address
End Destination IP Address
Ending destination IP address
Start Source Port
Starting source port number
End Source Port
Ending source port number
Start Destination Port
Starting destination port number
End Destination Port
Ending destination port number
Ingress
Ingress interface
Egress
Egress interface
Mode Discard Permit
Mode, including discard and permit
5-3
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
2. On the IP Filter tab, set the filter parameters, as shown in Figure 5-3.
Figure 5-3 IP Filter Configuration
3. Click Add to finish the configuration, as shown in Figure 5-4. Click Modify to modify
the configuration. Click Delete to delete the configuration.
5-4
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 5 Security Configuration
Figure 5-4 IP Filter Configuration Completed
– End of Steps –
Result
IP filter is configured.
5.3 Configuring URL Filter
Short Description
Perform this procedure to configure the URL filter.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure the URL filter, perform the following steps:
Steps
1. On the Security tab, select URL Filter, as shown in Figure 5-5.
5-5
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Figure 5-5 URL Filter
Table 5-3 lists the parameters for URL filter configuration.
Table 5-3 Parameters for URL Filter Configuration
Parameter
Description
Enable
To enable the URL filter function
Mode
Mode, including discard and permit
URL Address
URL address
2. On the URL Filter tab, set the filter parameters, as shown in Figure 5-6.
Figure 5-6 URL Filter Configuration
3. Click Add to finish the configuration, as shown in Figure 5-7. Click Delete to delete
the configuration.
5-6
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 5 Security Configuration
Figure 5-7 URL Filter Configuration Completed
– End of Steps –
Result
URL filter is configured.
5.4 Configuring DMZ Host
Short Description
Perform this procedure to configure the DMZ host.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure the DMZ host, perform the following steps:
Steps
1. On the Security tab, select DMZ Host, as shown in Figure 5-8.
5-7
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Figure 5-8 DMZ Host
2. Configure the DMZ host parameters, as shown in Figure 5-9.
Figure 5-9 DMZ Host Configuration
Table 5-4 lists the parameters for DMZ host configuration.
Table 5-4 Parameters for DMZ Host Configuration
Parameter
Description
Enable
To enable the DMZ host
WAN Connection
WAN-side connection interface
DMZ Host IP Address
IP address of the DMZ host
Note:
After the DMZ full port mapping function is enabled, all the ports are enabled by default.
The LAN-side host provides services through DNAT.
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
5-8
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 5 Security Configuration
Result
The DMZ host is configured.
5.5 Configuring Port Forwarding
Short Description
Perform this procedure to configure port forwarding.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure port forwarding, perform the following steps:
Steps
1. On the Security tab, select Port Forwarding, as shown in Figure 5-10.
Figure 5-10 Port Forwarding
2. Configure the port forwarding parameters, as shown in Figure 5-11.
5-9
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Figure 5-11 Port Forwarding Configuration
Table 5-5 lists the parameters for port forwarding configuration.
Table 5-5 Parameters for Port Forwarding Configuration
Parameter
Description
Enable
To enable the port forwarding function
Name
Host name
Protocol
Protocol name, including TCP, UDP, as well as TCP
and UDP protocols
WAN Host IP Address
Starting IP address of the WAN-side host
WAN Connection
WAN connection
WAN Start Port
Starting port number of the WAN-side host
WAN End Port
Ending port number of the WAN-side host
LAN Host IP Address
IP address of the LAN-side host
LAN Host Port
Port number of the LAN-side host
Note:
If a redirection policy of port access with the source address of the WAN-side IP
address and the destination address of the LAN-side IP address is configured, it is
used in the scenario where the WAN-side client accesses the LAN-side server.
5-10
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 5 Security Configuration
3. Click Add to finish the configuration, as shown in Figure 5-12. Click Modify to modify
the configuration. Click Delete to delete the configuration.
Figure 5-12 Port Forwarding Configuration Completed
– End of Steps –
Result
Port forwarding is configured.
5-11
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
This page intentionally left blank.
5-12
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 6
Service Configuration
Table of Contents
SIP VoIP Service Configuration ..................................................................................6-1
Configuring DDNS....................................................................................................6-10
Configuring UPnP .................................................................................................... 6-11
DNS Configuration ...................................................................................................6-13
QoS Configuration....................................................................................................6-16
Configuring SNTP Client ..........................................................................................6-26
IGMP Configuration..................................................................................................6-28
Configuring FTP Application .....................................................................................6-36
6.1 SIP VoIP Service Configuration
This topic includes the following:
Configuring
Configuring
Configuring
Configuring
Configuring
Configuring
VoIP WAN Connection
SIP
SIP Accounts
VoIP Advanced Parameters
VoIP Media Parameters
Fax
6.1.1 Configuring VoIP WAN Connection
Short Description
Perform this procedure to configure the VoIP WAN connection.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure the VoIP WAN connection, perform the following steps:
Steps
1. On the Web interface, click the Application tab. Select VoIP. By default, WAN
Connection is selected, as shown in Figure 6-1.
6-1
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Figure 6-1 WAN Connection
2. Select a connection interface from WAN Connection.
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
The VoIP WAN connection is configured.
6.1.2 Configuring SIP
Short Description
Perform this procedure to configure SIP.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure SIP, perform the following steps:
Steps
1. On the Application tab, select VoIP, and then select SIP Protocol, as shown in Figure
6-2.
6-2
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 6 Service Configuration
Figure 6-2 SIP Protocol
2. Configure the SIP protocol parameters, as listed in Table 6-1.
Table 6-1 Parameters for SIP Protocol Configuration
Parameter
Description
Local Port
Local port number used by the VoIP protocol
Primary Proxy Server
IP address of the primary proxy server
Primary Outbound Proxy Server
IP address of the primary outbound proxy server
Primary Proxy Port
Port number of the primary proxy server
Secondary Proxy Server
IP address of the secondary proxy server
Secondary Outbound Proxy Server
IP address of the secondary outbound proxy server
Secondary Proxy Port
Port number of the secondary proxy server
Register Expires
Registration expiration time
Unit: second
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
SIP is configured.
6-3
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
6.1.3 Configuring SIP Accounts
Short Description
Perform this procedure to configure SIP accounts.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure SIP accounts, perform the following steps:
Steps
1. On the Application tab, select VoIP, and then select SIP Accounts, as shown in
Figure 6-3.
Figure 6-3 SIP Accounts
2. Click Modify to modify the account parameters, as shown in Figure 6-4.
6-4
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 6 Service Configuration
Figure 6-4 SIP Account Configuration
Table 6-2 lists the parameters for SIP account configuration.
Table 6-2 Parameters for SIP Account Configuration
Parameter
Description
Username
Name of the SIP authentication user
Password
Password of the SIP authentication user
URI
User registration identification, that is, the user SIP
call number
3. Click Modify.
– End of Steps –
Result
The SIP accounts are configured.
6.1.4 Configuring VoIP Advanced Parameters
Short Description
Perform this procedure to configure the VoIP advanced parameters.
Prerequisites
The user has logged in to the Web interface of the device.
6-5
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Context
To configure the VoIP advanced parameters, perform the following steps:
Steps
1. On the Application tab, select VoIP, and then select Advanced, as shown in Figure
6-5.
Figure 6-5 Advanced Parameters
2. Configure the advanced parameters, as shown in Table 6-3.
Table 6-3 Advanced Parameters
Parameter
Description
Echo Cancellation
To enable or disable echo cancellation
VAD&CNG
To enable or disable VAD and CNG
DTMF
DTMF mode, including RFC2833, RFC2198, and DTMF in
Voice
Jitter Buffer
Jitter buffer, including fixed and adaptive
Min Value
Minimum jitter buffer value
Unit: ms
Max Value
Maximum jitter buffer value
Unit: ms
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
6-6
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 6 Service Configuration
Result
The VoIP advanced parameters are configured.
6.1.5 Configuring VoIP Media Parameters
Short Description
Perform this procedure to configure the VoIP media parameters.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure VoIP media parameters, perform the following steps:
Steps
1. On the Application tab, select VoIP, and then select Media, as shown in Figure 6-6.
Figure 6-6 Media Parameters
2. Configure the media parameters, as shown in Figure 6-7.
6-7
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Figure 6-7 Media Parameter Configuration
Table 6-4 lists the media parameters.
Table 6-4 Media Parameters
Parameter
Description
Codec Selection
Code type
Codec Priority
Code priority
The smaller the value is, the higher the priority is.
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
The VoIP media parameters are configured.
6.1.6 Configuring Fax
Short Description
Perform this procedure to configure fax.
Prerequisites
The user has logged in to the Web interface of the device.
6-8
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 6 Service Configuration
Context
To configure fax, perform the following steps:
Steps
1. On the Application tab, select VoIP, and then select Fax, as shown in Figure 6-8.
Figure 6-8 Fax Configuration
2. Select Enable T38.
Note:
To disable T38 fax mode, clear the check box.
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
Fax is configured.
6-9
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
6.2 Configuring DDNS
Short Description
Perform this procedure to configure DDNS.
Prerequisites
The user has logged in to the Web interface of the device.
Context
After DDNS is applied, the host that has the dynamic IP address can also provide the
domain name service. For example, when the host obtains an IP address through xDSL
dial-up or DHCP server dynamic allocation, and the host provides the domain name
service, by using DDNS, the effect on the domain name access when the IP address
changes is eliminated.
To configure DDNS, perform the following steps:
Steps
1. On the Application tab, select DDNS, as shown in Figure 6-9.
Figure 6-9 DDNS
2. Configure the DDNS parameters, as shown in Figure 6-10.
6-10
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 6 Service Configuration
Figure 6-10 DDNS Configuration
Table 6-5 lists the parameters for DDNS configuration.
Table 6-5 Parameters for DDNS Configuration
Parameter
Description
Enable
To enable the DDNS function
Server
Server address
If the GNUDIP HTTP protocol is used, the sever
address is a URL address. By default, it is
http://ns.eagleeyes.com.cn/cgi-bin/gdipupdt.cgi.
Username
DDNS server user name
Password
DDNS server password
Domain
Domain name corresponding to the user, valid only when the
GNUDIP protocol is used
WAN Connection
WAN-side connection interface
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
DDNS is configured.
6.3 Configuring UPnP
Short Description
Perform this procedure to configure UPnP.
6-11
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Prerequisites
The user has logged in to the Web interface of the device.
Context
The UPnP function supports zero configuration and device auto-discovery. After this
function is configured, the device can be dynamically added to a network to obtain the IP
address, announce the function, and know the functions of other devices.
To configure UPnP, perform the following steps:
Steps
1. On the Application tab, select UPnP, as shown in Figure 6-11.
Figure 6-11 UPnP
2. Configure the UPnP parameters, as shown in Figure 6-12.
Figure 6-12 UPnP Configuration
6-12
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 6 Service Configuration
Table 6-6 lists the UPnP parameters.
Table 6-6 UPnP Parameters
Parameter
Description
Enable
To enable UPnP
WAN Connection omci1
WAN-side connection interface
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
UPnP is configured.
6.4 DNS Configuration
This topic includes the following:
Configuring Domain Name
Configuring Host Name
6.4.1 Configuring Domain Name
Short Description
Perform this procedure to configure the domain name.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure the domain name, perform the following steps:
Steps
1. On the Application tab, select DNS Service. By default, Domain Name is selected,
as shown in Figure 6-13.
6-13
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Figure 6-13 Domain Name
2. Set Domain Name.
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
The domain name is configured.
6.4.2 Configuring Host Name
Short Description
Perform this procedure to configure the host name.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure the host name, perform the following steps:
Steps
1. On the Application tab, select DNS Service, and then select Hosts, as shown in
Figure 6-14.
6-14
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 6 Service Configuration
Figure 6-14 Host Name
2. Set Host Name and IP Address, as shown in Figure 6-15.
Figure 6-15 Host Name Configuration
3. Click Add to finish the configuration, as shown in Figure 6-16. Click Modify to modify
the configuration. Click Delete to delete the configuration.
6-15
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Figure 6-16 Host Name Configuration Completed
– End of Steps –
Result
The host name is configured.
6.5 QoS Configuration
This topic includes the following:
Configuring
Configuring
Configuring
Configuring
Configuring
Configuring
Basic QoS Parameters
QoS Rule
QoS Rule Type
QoS Local Application
QoS Queue Management
QoS Ingress Rate Limit
6.5.1 Configuring Basic QoS Parameters
Short Description
Perform this procedure to configure the basic QoS parameters.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure the basic QoS parameters, perform the following steps:
6-16
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 6 Service Configuration
Steps
1. On the Application tab, select QoS. By default, Basic is selected, as shown in Figure
6-17.
Figure 6-17 Basic QoS Parameters
Note:
The template index is enabled immediately after changed.
2. Configure the basic QoS parameters, as shown in Figure 6-18.
6-17
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Figure 6-18 Basic QoS Parameter Configuration
Table 6-7 lists the basic QoS parameters.
Table 6-7 Basic QoS Parameters
Parameter
Description
Template Index
Template index
Enable QoS
To enable or disable the QoS function
The Total Upstream Bandwidth
Upstream bandwidth through the WAN port
Range: 8000 – 104857600 bps
Queue Scheduling Algorithm
Queue scheduling algorithm
Range: SP and DWRR
DWRR bandwidth locked
To lock DWRR bandwidth (when the queue scheduling
algorithm is DWRR)
Enable DSCP Re-marking
To enable or disable DSCP remarking
802.1P Re-mark Model
To enable or disable the 802.1p remarking mode
Range: disable, transparent transmission, and enable
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
The basic QoS parameters are configured.
6-18
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 6 Service Configuration
6.5.2 Configuring QoS Rule
Short Description
Perform this procedure to configure the QoS rule.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure the QoS rule, perform the following steps:
Steps
1. On the Application tab, select QoS, and then select Rule, as shown in Figure 6-19.
Figure 6-19 QoS Rule
2. Configure the QoS rule parameters, as shown in Figure 6-20.
6-19
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Figure 6-20 QoS Rule Configuration
Table 6-8 lists the parameters for QoS rule configuration.
Table 6-8 Parameters for QoS Rule Configuration
Parameter
Description
802.1p Re-marking
802.1P remarking
DSCP Re-marking
DSCP remarking
CAR(Committed Access Rate)
Ingress rate limit rule
Queue
Congestion management queue
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
The QoS rule is configured.
6.5.3 Configuring QoS Rule Type
Short Description
Perform this procedure to configure the QoS rule type.
Prerequisites
The user has logged in to the Web interface of the device.
6-20
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 6 Service Configuration
Context
To configure the QoS rule type, perform the following steps:
Steps
1. On the Application tab, select QoS, and then select Rule Type, as shown in Figure
6-21.
Figure 6-21 Rule Type
2. Configure the QoS rule type parameters, as shown in .
Table 6-9 lists the parameters for QoS rule type Configuration
Table 6-9 Parameters for QoS Rule Type Configuration
Parameter
Description
Classification Rules
Classification rules
Protocol
Protocol
Range: TCP, UDP, ICMP, and RTP
Type
Type
Minimum
Minimum value
Maximum
Maximum value
3. Click Add to finish the configuration, as shown in Figure 6-22.
6-21
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Figure 6-22 Rule Type Configuration Completed
4. Click Modify to modify the configuration. Click Delete to delete the configuration.
– End of Steps –
Result
The QoS rule type is configured.
6.5.4 Configuring QoS Local Application
Short Description
Perform this procedure to configure the QoS local application.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure the QoS local application, perform the following steps:
Steps
1. On the Application tab, select QoS, and then select Local Application, as shown in
Figure 6-23.
6-22
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 6 Service Configuration
Figure 6-23 Local Application
2. In the Queue drop-down list, select a queue number.
Note:
At present, only the TR069 service mode is supported.
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
The QoS local application is configured.
6.5.5 Configuring QoS Queue Management
Short Description
Perform this procedure to configure QoS queue management.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure QoS queue management, perform the following steps:
6-23
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Steps
1. On the Application tab, select QoS, and then select Queue Management, as shown
in Figure 6-24.
Figure 6-24 Queue Management
2. Click the Modify icons in the table to modify the queue management functions.
3. Select or clear Enable to enable or disable the queue management function.
4. Click Modify to finish the configuration.
Note:
1 indicates enabled and 0 indicates disabled.
When the congestion management algorithm is DWRR, the queue weight needs to be
configured.
Weight refers to the ratio of the data flow passing through the queues to the total data
flow.
– End of Steps –
Result
QoS queue management is configured.
6-24
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 6 Service Configuration
6.5.6 Configuring QoS Ingress Rate Limit
Short Description
Perform this procedure to configure the QoS ingress rate limit.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure the QoS ingress rate limit, perform the following steps:
Steps
1. On the Application tab, select QoS, and then select Ingress Rate Limit, as shown
in Figure 6-25.
Figure 6-25 Ingress Rate Limit
2. Configure the parameters for QoS ingress rate limit, as shown in Figure 6-26.
6-25
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Figure 6-26 Ingress Rate Limit Configuration
Table 6-10 lists the parameters for ingress rate limit configuration.
Table 6-10 Parameters for Ingress Rate Limit Configuration
Parameter
Description
Visiting Interface
User interface for the rate limit rule
Enable
To enable the ingress rate limit function
Rate
Limit rate
8000 bps – 104857600 bps
3. Click Add to finish the configuration. Click Modify to modify the configuration. Click
Delete to delete the configuration.
– End of Steps –
Result
The QoS ingress rate limit is configured.
6.6 Configuring SNTP Client
Short Description
Perform this procedure to configure the SNTP client.
Prerequisites
The user has logged in to the Web interface of the device.
6-26
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 6 Service Configuration
Context
To configure the SNTP client, perform the following steps:
Steps
1. On the Application tab, select SNTP, as shown in Figure 6-27.
Figure 6-27 SNTP
2. Configure the SNTP parameters, as shown in Figure 6-27.
Figure 6-28 SNTP Configuration
Table 6-11 lists the SNTP parameters.
Table 6-11 SNTP Parameters
Parameter
Description
Time Zone
Time zone where the subscriber is located
Primary NTP Server
IP address of the primary NTP server
Address
6-27
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Parameter
Description
Secondary NTP Server
IP address of the secondary NTP server
Address
Poll Interval
Interval for server synchronization
Unit: second
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
The SNTP client is configured.
6.7 IGMP Configuration
This topic includes the following:
Configuring
Configuring
Configuring
Configuring
Basic IGMP Parameters
Multicast VLAN
Multicast MAC Limit
MVLAN Tag Strip
6.7.1 Configuring Basic IGMP Parameters
Short Description
Perform this procedure to configure the basic IGMP parameters.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure the basic IGMP parameters, perform the following steps:
Steps
1. On the Application tab, select IGMP. By default, Basic is selected, as shown in Figure
6-29.
6-28
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 6 Service Configuration
Figure 6-29 Basic IGMP Configuration
2. IGMP Mode includes IGMP Snooping, IGMP Proxy, and Disabled.
indicates to disable the IGMP mode configuration.
l Configure IGMP Snooping.
Disabled
From the IGMP Mode drop-down list, select IGMP Snooping, as shown in Figure
6-30.
Figure 6-30 IGMP Snooping Configuration
Table 6-12 lists the parameters for IGMP snooping configuration.
Table 6-12 Parameters for IGMP Snooping Configuration
Parameter
Description
IGMP Mode
IGMP mode
Multicast MAC Aging Time
Aging time of the multicast address
6-29
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Parameter
Description
Non-Fast-Leave
To enable the Non-Fast-Leave mode
Configure IGMP Proxy.
From the IGMP Mode drop-down list, select IGMP Proxy, as shown in Figure
6-31.
Figure 6-31 IGMP Proxy Configuration
Table 6-13 lists the parameters for IGMP proxy configuration.
Table 6-13 Parameters for IGMP Proxy Configuration
Parameter
Description
IGMP Mode
IGMP mode
Multicast MAC Aging Time
Aging time of the multicast address
Report Time
Periodical report time of multicast messages
Note:
ZXA10 F660 periodically reports the IGMP member report messages to the
upper-layer multicast router according to the Report Time.
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
6-30
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 6 Service Configuration
Result
The basic IGMP parameters are configured.
6.7.2 Configuring Multicast VLAN
Short Description
Perform this procedure to configure the multicast VLAN.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure the multicast VLAN, perform the following steps:
Steps
1. On the Application tab, select IGMP, and then select Multicast VLAN, as shown in
Figure 6-32.
Figure 6-32 Multicast VLAN
2. Configure the multicast VLAN parameters, as shown in Figure 6-33.
6-31
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Figure 6-33 Multicast VLAN Configuration
Table 6-14 lists the parameters for the multicast VLAN configuration.
Table 6-14 Parameters for Multicast VLAN Configuration
Parameter
Description
IGMP Mode
IGMP mode, configured on the Basic tab
Enable Multicast VLAN
To enable the multicast VLAN function
Enable Translation
To enable multicast VLAN translation
Multicast VLAN
To create a multicast VLAN
New VLAN
Multicast VLAN ID
Interface Name
LAN interface to be added to the multicast VLAN
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
The multicast VLAN is configured.
6.7.3 Configuring Multicast MAC Limit
Short Description
Perform this procedure to configure multicast MAC limit.
Prerequisites
The user has logged in to the Web interface of the device.
6-32
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 6 Service Configuration
Context
The multicast MAC limit function can be configured only when the IGMP mode is IGMP
Snooping. IGMP Proxy does not support this function.
To configure multicast MAC limit, perform the following steps:
Steps
1. On the Application tab, select IGMP, and then select Multicast MAC Limit, as shown
in Figure 6-34.
Figure 6-34 Multicast MAC Limit
2. Click the Modify icon to configure the multicast MAC limit, as shown in Figure 6-35.
Figure 6-35 Multicast MAC Limit Configuration
Table 6-15 lists the parameters for the multicast MAC limit configuration.
6-33
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Table 6-15 Parameters for Multicast MAC Limit Configuration
Parameter
Description
Multicast MAC Address Limit
Maximum multicast addresses for each LAN port
Range: 0 – 256
3. Click Modify.
– End of Steps –
Result
Multicast MAC limit is configured.
6.7.4 Configuring MVLAN Tag Strip
Short Description
Perform this procedure to configure MVLAN tag strip.
Prerequisites
The user has logged in to the Web interface of the device.
Context
The MVLAN tag strip function can be configured only when the IGMP mode is IGMP
Snooping. IGMP Proxy does not support this function.
To configure MVLAN tag strip, perform the following steps:
Steps
1. On the Application tab, select IGMP, and then select Tag Stripe, as shown in Figure
6-36.
6-34
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 6 Service Configuration
Figure 6-36 MVLAN Tag Strip
2. Click the Modify icon to configure MVLAN tag strip, as shown in Figure 6-37.
Figure 6-37 MVLAN Tag Strip Configuration
Table 6-16 lists the parameters for MVLAN tag strip configuration.
Table 6-16 Parameters for MVLAN Tag Strip Configuration
Parameter
Description
Enable Tag Stripe
To enable the MVLAN tag strip function
3. Click Modify.
– End of Steps –
Result
MVLAN tag strip is configured.
6-35
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
6.8 Configuring FTP Application
Short Description
Perform this procedure to configure FTP application.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure FTP application, perform the following steps:
Steps
1. On the Application tab, select FTP Application, as shown in Figure 6-38.
Figure 6-38 FTP Server
2. Configure the FTP server parameters, as shown in Figure 6-39.
Figure 6-39 FTP Server Configuration
6-36
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 6 Service Configuration
Table 6-17 lists the FTP server parameters.
Table 6-17 FTP Server Parameters
Parameter
Description
Enable FTP Server
To enable the FTP server
FTP Username
FTP login user name
FTP Password
FTP login password
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
FTP application is configured.
6-37
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
This page intentionally left blank.
6-38
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 7
Device Management
Table of Contents
TR069 Configuration ..................................................................................................7-1
User Management......................................................................................................7-4
Device Management ..................................................................................................7-5
Log Management .......................................................................................................7-9
Ping Diagnosis .........................................................................................................7-10
7.1 TR069 Configuration
This topic includes the following:
Configuring Basic TR069 Parameters
Importing TRO69 Certificate
7.1.1 Configuring Basic TR069 Parameters
Short Description
Perform this procedure to configure the basic TR069 parameters.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure the basic TR069 parameters, perform the following steps:
Steps
1. On the Administration tab, select TR-069. By default, Basic is selected, as shown
in Figure 7-1.
7-1
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Figure 7-1 Basic TR069 Parameters
2. Configure the basic TR069 parameters, as shown in Figure 7-2.
Figure 7-2 Basic TR069 Parameter Configuration
Table 7-1 lists the basic TR069 parameters.
Table 7-1 Basic TR069 Parameters
Parameter
Description
WAN Connection
WAN-side connection interface
ACS URL
Network server URL
Username
User name
Password
Password
Connection Request URL
Connection request URL
Connection Request Username
Connection request user name
7-2
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 7 Device Management
Parameter
Description
Connection Request Password
Connection request password
Enable Periodic Inform
To enable periodic report
Periodic Inform Interval
Periodic report interval
Enable Certificate
To enable certificate
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
The basic TR069 parameters are configured.
7.1.2 Importing TRO69 Certificate
Short Description
Perform this procedure to import the TR069 certificate.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To import the TR069 certificate, perform the following steps:
Steps
1. On the Administration tab, select TR-069, and then select Certificate, as shown in
Figure 7-3.
Figure 7-3 TRO69 Certificate
2. Click Browse to select the certificate file.
7-3
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
3. Click Import Certificate to import the file.
– End of Steps –
Result
The TR069 certificate is imported.
7.2 User Management
Short Description
Perform this procedure to manage users.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To manage users, perform the following steps:
Steps
1. On the Administration tab, select User Management, as shown in Figure 7-4.
Figure 7-4 User Management
2. Configure the user management parameters.
Note:
User Right includes Administrator and User.
7-4
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 7 Device Management
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
User management is complete.
7.3 Device Management
This topic includes the following:
System Management
Software Upgrade
Configuration Management
7.3.1 System Management
Short Description
Perform this procedure to manage the system.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To manage the system, perform the following steps:
Steps
1. On the Administration tab, select System Management, as shown in Figure 7-5.
Figure 7-5 System Management
2. Click Reboot to reboot the device.
7-5
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
3. Click Restore Default to restore the system to the factory default settings.
– End of Steps –
Result
System management is complete.
7.3.2 Software Upgrade
Short Description
Perform this procedure to upgrade the software.
Prerequisites
The user has logged in to the Web interface of the device.
Context
Caution!
Generally, the software is upgraded by the ZTE CORPORATION engineers. If the user
wants to upgrade the software, contact the local office of ZTE CORPORATION to obtain
the latest software version.
To upgrade the software, perform the following steps:
Steps
1. On the Administration tab, select System Management, and then select Software
Upgrade, as shown in Figure 7-6.
Figure 7-6 Software Upgrade
2. Click Browse to select the software version.
3. Click Upgrade to upgrade the software, as shown in Figure 7-7.
7-6
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 7 Device Management
Figure 7-7 Upgrading Software
Figure 7-8 shows the result of software upgrade.
Figure 7-8 Software Upgrade Completed
Note:
During the upgrade process, the device cannot be powered off; otherwise, it may be
damaged.
During the upgrade process, the system prompts a message. After the upgrade is
complete, the system returns to the login interface.
– End of Steps –
Result
The software is upgraded.
7-7
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
7.3.3 Configuration Management
Short Description
Perform this procedure to manage the device configuration.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To manage the device configuration, perform the following steps:
Steps
1. On the Administration tab, select System Management, and then select
Configuration Management, as shown in Figure 7-9.
Figure 7-9 Configuration Management
2. Click Backup Configuration to back up the existing configuration file.
3. Click Browse to select the backed up configuration file.
4. Click Restore Configuration to restore the backed up configuration file, as shown in
Figure 7-10.
7-8
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 7 Device Management
Figure 7-10 Importing File Completed
– End of Steps –
Result
The configuration management is complete.
7.4 Log Management
Short Description
Perform this procedure to manage logs.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To manage logs, perform the following steps:
Steps
1. On the Administration tab, select Log Management, as shown in Figure 7-11.
7-9
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
Figure 7-11 Log Management
2. Configure the log management parameters, as listed in Table 7-2.
Table 7-2 Log Management Parameters
Parameter
Description
Log Enable
Whether to enable the log server
Log Level
Log level, including Debug, Informational, Notice, Warning,
Error, Critical, Alert, and Emergency
When Log Level is configured, only the logs above the specified
level are saved.
3. Click Refresh to display the latest 20 logs.
4. Click Clear Log to clear the current log records.
5. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
Log management is complete.
7.5 Ping Diagnosis
Short Description
Perform this procedure to diagnose ping connection.
Prerequisites
The user has logged in to the Web interface of the device.
7-10
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 7 Device Management
Context
To diagnose ping connection, perform the following steps:
Steps
1. On the Administration tab, select Diagnosis, as shown in Figure 7-12.
Figure 7-12 Ping Diagnosis
2. In Input IP Address or host name , enter the host IP address or host name.
3. Click Submit to diagnose the connection, as shown in Figure 7-13. Click Cancel to
cancel the configuration.
Figure 7-13 Ping Diagnosis Result
– End of Steps –
Result
Ping diagnosis is complete.
7-11
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
This page intentionally left blank.
7-12
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Chapter 8
FAQ
Table of Contents
FAQ ...........................................................................................................................8-1
8.1 FAQ
How Can I set TCP/IP on the Computer Connected to the Device?
The default device IP address is 192.168.1.1. Therefore, set the computer IP address
to 192.168.1.2 – 192.168.1.254 and the subnet mask to 255.255.255.0.
How Can I Ensure That My Computer Is Successfully Connected to the Device?
On the command line interface, carry out the ping 192.168.1.1 command. If the connection
fails, the interface prompts connection timeout.
How Can I Set the Device Through the Web Interface?
Make sure that the computer is connected to the device. Then open the Internet Explorer
and enter http://192.168.1.1 on the address bar to access the Web interface of the
device. The default user name and password are admin.
How Can I Restore the Device to the Factory Default Settings?
Press the RST reset button for more than 10 seconds to reboot the device. Then the
device is restored to the factory default settings.
Why Is the PON Link Indicator Always OFF?
If the PON link indicator is always OFF, it indicates that the PON link is not successfully set
up. Make sure that the fiber is correctly connected with the PON port and the subscriber
device. Make sure that the tail fiber is straight and is in good condition.
Why Does the Device Fail to Make a Call?
Check whether the telephone cable is correctly connected to the POTS1 or POTS2 port.
Then access the Web interface of the device. Click the Application tab to check the
VoIP configuration. If the VoIP configuration is correct and the telephone cable is correctly
connected, but the call still cannot be made, contact the service provider.
8-1
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
ZXA10 F660 User Manual
This page intentionally left blank.
8-2
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Glossary
CATV
- CAble TeleVision
CNG
- Comfort Noise Generation
DC
- Direct Current
DDNS
- Dynamic Domain Name Server
DHCP
- Dynamic Host Configuration Protocol
DMZ
- Demilitarized Zone
DNAT
- Destination Network Address Translation
DNS
- Domain Name Server
DSCP
- Differentiated Services Code Point
DSL
- Digital Subscriber Line
DTMF
- Dual-ToneMulti-Frequency
DWRR
- Deficit Weighted Round Robin
FTP
- File Transfer Protocol
FTTH
- Fiber to the Home
GE
- Gigabit Ethernet
GPON
- Gigabit Passive Optical Network
HTTP
- Hypertext Transfer Protocol
ZXA10 F660 User Manual
ICMP
- Internet Control Message Protocol
IEEE
- Institute of Electrical and Electronics Engineers
IGMP
- Internet Group Management Protocol
IP
- Internet Protocol
IPTV
- Internet Protocol Television
ISP
- Internet Service Provider
ITU
- International Telecommunications Union
LAN
- Local Area Network
MAC
- Medium Access Control
NAT
- Network Address Translation
NTP
- Network Time Protocol
OLT
- Optical Line Terminal
OMCI
- ONT Management Control Interface
ONT
- Optical Network Terminal
ONU
- Optical Network Unit
PON
- Passive Optical Network
POTS
- Plain Old Telephone Service
PPPoE
- Point to Point Protocol over Ethernet
QoS
- Quality of Service
II
Glossary
RF
- Radio Frequency
RTP
- Real-time Transport Protocol
SIP
- Session Initiation Protocol
SNTP
- Simple Network Time Protocol
SP
- Strict Priority
SS
- Soft Switch
TCP
- Transfer Control Protocol
TCP/IP
- Transfer Control Protocol/Internet Protocol
UDP
- User Datagram Protocol
URL
- UniformResource Locator
VAD
- Voice Activity Detectors
VLAN
- Virtual Local Area Network
VoIP
- Voice over Internet Protocol
WAN
- Wide Area Network
WEP
- Wired Equivalent Privacy
WLAN
- Wireless Local Area Network
WPA
- Wi-Fi Protected Access
Wi-Fi
- Wireless Fidelity
III

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Compression Level               : 6
Compression Type                : auto
Config File                     : C:\Program Files\PTC\Arbortext PE M010\lib\standard.pdfcf
Create Date                     : 2011:10:08 08:58:13+08:00
Creator                         : Arbortext 5.4
EPS Processor                   : PStill version 1.72.18
Graphics Resolution             : 600
Graphics Resolution Threshold   : 900
JPEG Quality                    : 80
Modify Date                     : 2011:10:08 14:29:56+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Compression 0020level           : 6
Compression 0020type            : auto
Config 0020 File                : C:\Program Files\PTC\Arbortext PE M010\lib\standard.pdfcf
EPS0020processor                : PStill version 1.72.18
Graphics 0020resolution         : 600
Graphics 0020resolution 0020threshold: 900
JPEG0020quality                 : 80
Creator Tool                    : Arbortext 5.4
Metadata Date                   : 2011:10:08 14:29:56+08:00
Producer                        : PDFlib+PDI 7.0.4 (Win32)
Format                          : application/pdf
Document ID                     : uuid:7a5abe31-e147-4e5a-9b2e-dc1243a6bf7b
Instance ID                     : uuid:cce9926a-ce45-4dce-8ff2-3e5823cbd412
Page Count                      : 117

EXIF Metadata provided by EXIF.tools