ZTE ZXHNH108NV31 Home Gateway User Manual Use manual ZXHN H108N

ZTE Corporation Home Gateway Use manual ZXHN H108N

Users Manual

Download: ZTE ZXHNH108NV31 Home Gateway User Manual Use manual ZXHN H108N
Mirror Download [FCC.gov]ZTE ZXHNH108NV31 Home Gateway User Manual Use manual ZXHN H108N
Document ID1635292
Application IDmDQ8KsUG2wRBzr3BkOnahg==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize12.49kB (156148 bits)
Date Submitted2012-02-12 00:00:00
Date Available2012-02-12 00:00:00
Creation Date2012-02-03 15:58:37
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2012-02-07 15:50:22
Document TitleMicrosoft Word - Use manual_ZXHN H108N.DOC
Document CreatorPScript5.dll Version 5.2.2
Document Author: a

ZXHN H108N
User’s Manual
Document version: 20110725-R1.4US
Copyright 2010 ZTE Corporation
All rights reserved.
No part of this documentation may be excerpted, reproduced,
translated, annotated or duplicated, in any form or by any
means without the prior written permission of ZTE
Corporation.
ZTE CORPORATION reserves the right to modify this manual
for product upgrade or other causes without notifying users in
advance.
Limited warranty
ZTE warrants that, for one year from the date of delivery by ZTE to
purchaser's designated carrier, the Equipment will remain free from
defects in design, material and workmanship under normal use and
service and will conform in all material respects to the applicable
specifications set forth in purchase order or agreement; ZTE does not
warrant that operation of the Equipment will be error-free or
uninterrupted.
In accordance with ZTE's standard, warranty terms, ZTE shall, at its
option, repair or replace any defective or nonconforming item, provided
that (a) purchaser/End User gives ZTE written notice of the defect or
nonconformity within the warranty period specified above promptly after
Reseller is notified by the End User of the same; and (b) End User
returns the defective item at its expense to ZTE’s nominated Customer
Service Department in accordance with ZTE’s standard parts exchange
procedures.
This warranty does not apply to defects or errors in the Equipment
caused by:(a) reasonable abrasion of equipments; (b)End User’s failure
to follow ZTE’s installation, operation or maintenance instructions or
procedures; (c) End User’s mishandling, misuse, negligence, or
improper installation, deinstallation, storage, servicing or operation of
the Equipment; (d) modifications or repairs not made by ZTE or a
ZTE-certified individual;(e) power failures, surges, fire, flood, accident,
actions of third parties or other events outside ZTE’s reasonable control.
(f) usage of products of third Parties, or usage conjunction with third
parties provided that such defects is due to the conjunction;(g) any
ZXHN H108N User’s Manual
other cause beyond the range of normal usage for equipments. End
User shall assure that Equipment is installed and maintained by ZTE or
ZTE-certified individuals in accordance with ZTE’s certification
procedures; provided that if End User causes or permits services to be
provided by individuals who are not ZTE-certified, the Warranty shall be
void as to all Equipment serviced in breach of this sentence. End User
shall have no right to reject, return, or receive a refund for any
Equipment from ZTE. Any item repaired or replaced by ZTE shall
continue to be warranted for the longer of the remainder of the original
warranty period or 90 days from the date the repaired or replaced part
is delivered to the carrier.
THIS WARRANTY (1) IS END USER'S SOLE REMEDY AND ZTE’S
SOLE LIABILITY FOR DEFECTIVE OR NONCONFORMING ITEMS ,
AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED,
IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE, UNLESS OTHERWISE REQUIRED
UNDER THE MANDATORY PROVISIONS OF THE CHINESE LAW,
AND (2) IS BETWEEN ZTE AND END USER (AS THE ORIGINAL
PURCHASER FOR END USE) AND MAY NOT BE TRANSFERRED
OR ASSIGNED, BY OPERATION OF LAW OR OTHERWISE,
WITHOUT ZTE’S PRIOR WRITTEN CONSENT.
Limitation of Liability
ZTE SHALL NOT BE LIABLE FOR ANY LOSS OF PROFITS OR
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM OR ARISING OUT OF OR IN CONNECTION
ii
ZXHN H108N User’s Manual
WITH USING OF THIS PRODUCT, WHETHER OR NOT ZTE HAD
BEEN ADVISED, KNEW OR SHOULD HAVE KNOWN OF THE
POSSIBILITY OF SUCH DAMAGES, INCLUDING, BUT NOT LIMITED
TO, LOST PROFITS, COST OF CAPITAL, COST OF SUBSTITUTE
FACILITIES OR EQUIPMENT, ANY DOWNTIME COSTS OR CLAIMS
OF END USERS. THE LIABILITY OF EACH PARTY UNDER
THIS AGREEMENT, WHETHER ARISING OUT OF BREACH OF
CONTRACT (INCLUDING BUT NOT LIMITED TO BREACH OF
WARRANTY) OR TORT (INCLUDING BUT NOT LIMITED TO
NEGLIGENCE AND STRICT LIABILITY) OR UNDER AN
INDEMNIFICATION PROVISION SHALL IN NO EVENT EXCEED THE
AGGREGATE AMOUNT BENIFITED BY ZTE IN THE PRODUCTS
FROM WHICH SUCH LOSS OR DAMAGE DIRECTLY AROSE.
Confidentiality
End User agrees that End User will receive confidential or
proprietary information (“Confidential Information”) in connection
with the purchase and deployment of ZTE Equipment. End User
will not disclose ZTE’s Confidential Information, will use it only
for purposes for which it was disclosed, and must treat it with the
same degree of care as it does its own similar information, but with
no less than reasonable care. End User agrees that the terms herein,
the Equipment and all ZTE documentation is ZTE Confidential
Information.
iii
Contents
Chapter 1 Safety Guidance ............................................................1
1.1 Safety Check ......................................................................................... 1
1.2 Safety Cautions ..................................................................................... 1
Chapter 2 Overview .......................................................................3
2.1 Features................................................................................................. 3
2.2 Product Specifications .......................................................................... 4
2.3 Package Check ...................................................................................... 4
2.4 System Requirement ............................................................................. 5
Chapter 3 Installation Preparation ...............................................6
3.1 Hardware Description ........................................................................... 6
3.2 Hardware Connection ........................................................................... 8
Appendix A FAQs ......................................................................... 11
Appendix B Standard Compliance..............................................13
Chapter 1 Safety Guidance
1.1 Safety Check
Before installing the ZXHN H108N ADSL equipment, you must check the
following items.
1 Electric safety

Ensure that there are no inflammable, conductive or moist objects
around. Check whether the cables are aged and whether other
electrical appliances are placed stably.
2 Equipment position

Because the running electric devices easily generate heat, please
ensure that these devices are positioned in a well ventilated
environment.

The devices should be placed on a stable and flat plane.

Never expose the equipment to direct sunshine, and never place it on a
PC case.

Keep the equipment away from heat and water.

Check whether power supply is available. The input voltage
fluctuation range must be less than 10%. The power plug should not
share one socket with a hair drier, iron or refrigerator.
1.2 Safety Cautions

Read the user manual carefully before using the equipment.

Note all Cautions in the user manual and product guide.

Never use an accessory unbelonging to the equipment without prior
consent of the manufacture, because it may cause fire or product
damage.
ZXHN H108N User’s Manual

Use the power adapter accompanied in the package.

Rather than directly connecting phones to the ADSL line, led them out
from the phone interface of the splitter.

Never place any objects on the equipment.

Keep the equipment dry, ventilated and rainproof, and clean.

Unplug the power and all connection cables in case of thunderstorms,
to protect the equipment against lightning.

Clean the equipment using a soft and dry cloth rather than liquid or
atomizers. Power off the equipment before cleansing it.

Power off the idle equipment.

Keep the ventilation hole clean and prevent any objects from dropping
into the equipment through it. Otherwise, it may cause short circuit
and further cause equipment damage and fire. Do not spray liquid on
the surface of the equipment.

Do not open the case of the equipment, especially during equipment
power-on.

Before plugging/unplugging the power, make sure that the power is off,
thus avoiding surge.

Be careful when unplugging the power, because the transformer may
be very hot.

Keep the equipment and all its parts and accessories out of children’s
reach.
Note:
Please read the above safety guidance carefully before equipment use. Users
should assume responsibilities for any accidents due to incompliance with the
above instructions.
Chapter 2 Overview
The ZXHN H108N is an ADSL access device that allows multiple line
transmission modes. At the user end, it not only provides four 10/100Base-T
Ethernet interfaces, but also adds the wireless user access in compliance with
the IEEE802.11b/g/n standard. Through the high-speed ADSL access service,
the ZXHN H108N can provide the broadband Internet service or enterprise
network access service for users.
2.1 Features
The ZXHN H108N, as a routing-capable ADSL MODEM, is of the following
characteristics:

Support G.992.1(G.DMT),G.992.3(ADSL2),G.992.5(ADSL2+)

Support data transportation among ADSL, Ethernet and WLAN

Support 802.11b, 802.11g, 802.11n mode

Web-based configuration and monitoring.

Support up to 8 PVCs.

Support Bridge or Routing mode.

Support NAT

Support DHCP Client/DHCP Server.
ZXHN H108N User’s Manual
2.2 Product Specifications

Environmental requirements
Environmental temperature: -5°C-45°C (23 °F-113°F)
Humidity: 5% - 95% (non-condensing)

Power specification
Power adapter: Input: AC 100-240V, 50/60 Hz
Output: DC 12V, 1000mA

Certification
CE
2.3 Package Check

ZXHN H108N
1

Splitter
1

Power Adapter
1

RJ-11 telephone cable
2

RJ-45 Ethernet cable
1

User’s Manual & Quality Warranty Card
1

Certificate of Quality
1

CD (Optional)
Note: for your information only, please refer to the actual product.
ZXHN H108N User’s Manual
Note:
Please use a power adapter that matches the ZXHN H108N package.
2.4 System Requirement
Before installing the ZXHN H108N, please check the following items.
1 ADSL Services Subscription
If you have subscribed for the ADSL service, your ADSL operator must
provide at least one valid IP address for you (static allocation or dialup
dynamic allocation).
2 Computer configuration
Please make sure that the system has been equipped with the 10M/100M
Ethernet adapter and supports the TCP/IP protocol.
Because ADSL can be used for broadband access and involves a wide range
of multimedia services, you are recommended use a computer with such
configurations as: above Pentium III, 64M memory, 10G hard disk, graphic
accelerating adapter with above 2M display memory, audio adapter and
sound box.
3 Operating system
Operating systems can be Windows 98SE, Windows Me, Windows 2000,
Windows XP, Windows Vista or Windows 7. For system configuration in the
WEB interface, the browser of Internet Explorer V 6.0 or later.
Chapter 3 Installation Preparation
3.1 Hardware Description
Front panel
Figure 3.1-1 Front Panel of the ZXHN H108N
Table 3.1-1 Descriptions of the LEDs on the Front Panel
Identification
Color
Power
Green/Red
Status
Off
Red Flash
Green On
Off
DSL
Green
Flash
On
Off
Flash
Internet
Green/Red
On
Red
Steady on
LAN1~LAN4
Green
Flashing
Description
Power off
Software upgrade
Power on
No signals are detected
The MODEM is trying to be in the
activation status
The MODEM has been activated.
The system is under the Bridge mode or
the ADSL has not been connected
There are some data packets passing the
MODEM
The system is under the Route mode and
the ADSL has been connected. The
MODEM IP data packet can be normally
transceiver (For example, the built-in
PPPOE has been established and the
dynamic IP address has been obtained).
Device attempted to become IP connected
and failed (no DHCP response, no PPPoE
response, PPPoE authentication failed, no
IP address from IPCP, etc.)
The LAN connection is established but no
is data transferring.
Data is transmitting. The flashing
frequency indicates the LAN traffic.
ZXHN H108N User’s Manual
Identification
Color
Status
Description
The device is not powered on or the LAN
connection has not been established
The wireless port is enabled.
Data is transmitting. The flashing
frequency indicates the WLAN traffic.
The device is not powered on or the
wireless port is disabled.
A USB device, such as hard disk is
connected.
Data is transmitting.
The device is not powered on or the USB
device connection has not been
established.
The wireless terminal device is connected
through WPS successfully. The indicator
turns off five minutes later.
The wireless terminal device is connecting
with H108N through WPS.
There is error when the wireless terminal
is connecting to H108N through WPS.
There is no wireless terminal device
connected to H108N through WPS or the
wireless terminal device has been
connected to H108N through WPS for
more than five minutes.
Off
Steady on
WLAN
Green
Flashing
Off
Steady on
USB
Green
Flashing
Off
On
WPS
Green
Slowly
flashing
Quickly
flashing
Off
Rear panel
Figure 3.1-2 Rear Panel of the ZXHN H108N
Table 3.1-2 Description of Interfaces on the Rear Panel
Item
DSL
LAN1-LAN4
WPS
Introduction
RJ-11 connection interface: The equipment is connected to the ADSL line or splitter via
the telephone line.
RJ-45 connection interface: Connect it to the PC computer or other network devices using
the network cable.
WPS switch
ZXHN H108N User’s Manual
Item
Reset
WLAN
Introduction
This button is on the bottom of modem. In the power-on state, you can restore the system
to the default configuration by using a thin needle to press this slot for three seconds or
for three executive times.
Wi-Fi switch
POWER
Power interface. Connect it to the power adapter.
ON/OFF
Power switch
3.2 Hardware Connection
Introduction:
1.
Use one RJ11 cable(match the ZXHN H108N package)to connect the
LINE port of the splitter with the RJ-11 port (the phone jack) on the wall.
2.
Use another RJ11 cable(match the ZXHN H108N package)to connect
the MODEM (or ADSL) port of the splitter with the LINE port of the Gateway.
3.
Use the third RJ11 cable(additional, if customers also want to use
telephone at the same time)to connect the telephone set with the PHONE (or
TEL) port of the splitter.
ZXHN H108N User’s Manual
4.
Connect Ethernet port of the Gateway with 10/100BASE-T port of the
computer using the network cable that comes with the modem.
5.
Plug in the power cord, and turn on the power.
If you don’t want Internet services and telephone voice services simultaneously,
please just connect the LINE port of the Gateway with the RJ-11 port (the
phone jack) on the wall using a telephone cord. In this case, the splitter is not
necessary.
Connection procedures
1 Power off the equipment before all the other devices are connected.
2 Connect the network cables: Insert the RJ-45 Ethernet cable connector
into the Ethernet interface of the ZXHN H108N, and connect its other
terminal to the Ethernet adapter of the customer computers or ports of other
network devices.
3 Connect the splitter
The splitter has three interfaces, which are described as follows:
 LINE: Connect the user telephone cable (RJ11 interface).
 MODEM (or ADSL): Connect the DSL interface of the ZXHN H108N.
 PHONE (or TEL): Connect the phone sets.
The installation process is as follows: Connect the LINE interface of the
ZXHN H108N to the MODEM(or ADSL) interface of the splitter using the
RJ-11 telephone cable, connect the phone set lines to the PHONE(or TEL)
interface of the splitter, and then connect the user telephone cable port to the
LINE interface of the splitter.
4 Connect the power
Connect one terminal of the power adapter to the POWER interface of the
ZXHN H108N, and the other terminal to the socket on the wall, and then
switch on the power of the ZXHN H108N equipment.
Checking all connection cables
ZXHN H108N User’s Manual
Check all connection cables following the below procedure.
1 Check the ADSL cable connection
If the DSL LED is on upon power-on of the ZXHN H108N, it indicates that
the ADSL line is correctly connected (Generally it takes one to two minutes
to perform the ADSL connection).
2 Check the computer connection
If both the LINK LED on the computer adapter and the Ethernet LED of the
ZXHN H108N turn green, it indicates that the computer and the ZXHN
H108N equipment are correctly connected.
3 Check the telephone cable connection
The telephone cable is correctly connected if the received telephone signals
are normal and free of noise. And the telephone will not be affected no
matter whether the ZXHN H108N is powered on or off.
10
Appendix A FAQs
All indicators are off after the ZXHN H108N equipment is powered on.
First make sure that you have inserted the power adapter of the ZXHN H108N into a working
power socket and that the ZXHN H108N has been powered on (the switch button is pressed
down). If the indicators are still off after confirmation of the above items, the hardware is
damaged probably. You may contact local operators for maintenance. Never dismantle the
equipment by yourself.
Will ADSL affect the telephone conversation quality? Will making phone calls cause a slow
online rate?
ADSL separates voices from data through the frequency division multiplexing technology.
Therefore, voices and data run in different paths without mutual interference. Neither the access
rate nor conversation quality will fall even if you are in a call and on line simultaneously.
Sometimes, the ADSL users cannot gain access to the Internet normally.
First check whether the ZXHN H108N is in the normal state (Check the indicators with this user
manual). If yes, the computer or application network may be faulty, which is unrelated with
ADSL. If the ADSL MODEM is abnormal, check the status of indicators one by one to remove
the fault.
You are suggested to first make sure the following items before seeking help from operators: 1.
The ADSL telephone cable connectors are proper; 2. The ADSL is away from the power cable and
large-power electronic devices; 3. No telephone extensions and fax machines are installed
between the ADSL incoming line and splitter; 4. The splitter has been correctly installed; 5. The
ADSL MODEM is of good heat dissipation.
Password verification failure.
MODEM synchronization and connection are normal. However, sometimes the password fails to
be verified.
1. Note that the account and password are case sensitive and some accounts contain a domain
name.
2. Virtual dialup software. It is possible that sometimes the virtual dialup software is faulty, or
conflict with other software in the operating system. At this time, you are suggested to reinstall
the dialup software or replace it with other software.
3. Network adapter drive program problem.
4. In arrears of fees. Pay the fee timely in this case.
11
ZXHN H108N User’s Manual
What are reasons for ADSL synchronization failure (also referred to link down or link
establishment failure)?
If the ADSL suddenly fails to be synchronized (link down) during application, usually the DSL
indicator of the MODEM will not be solid on. You are suggested for checkup in the following
sequence:
1. First check the quality of incoming cables and incoming cable connectors.
2. Install the ADSL Modem correctly based on the user guide, to minimize the number of taps.
3. Check whether the telephone cables and ADSL are in good contact or whether the telephone
cables are normal.
4. Try to disconnect the splitter and directly connect the ADSL Modem to the incoming customer
cable end to ensure that the problem is not due to improper installation or incoming customer line
quality. If the ADSL can be synchronized again, it means that installation of the incoming
customer part is improper. Please reinstall it according to the user guide.
5. If the ADSL still fails to be synchronized after the ADSL Modem has been connected to the
incoming customer cable end, contact the operators to check whether it is due to external line
failure or Modem failure.
6. If the splitter problem is determined, call the operators for maintenance or replacement.
7. The problem may be also due to the end office equipment fault of the operator. Call the
operator to confirm it.
8. Too long connection cable between the splitter and ADSL Modem may cause poor
anti-interference performance and synchronization difficulty. Therefore, the connection cable
should not be too long.
The authenticated user names and passwords cannot be re-authenticated?
This problem may be due to the following reasons:
1. Your account has expired or you are a defaulting subscriber (please pay the deficit sum).
2. You move into a new area. Because the account and the path PVC are bundled by some
operators, your previous account and password cannot be authenticated after you changed your
path.
3. One of your accounts has logged on successfully. Therefore, you will fail to be re-authenticated
because the operator has recognized the uniqueness of this account
4. Maybe you failed to deregister your account timely in the Broadband Access Server (BAS)
when you were off line abnormally, so the BAS or the billing system deemed that your account
was still available. Therefore, your re-login may fail because of uniqueness of your account You
are suggested to redial up later. If still failing, contact the operator for a solution.
12
ZXHN H108N User’s Manual
Appendix B Standard Compliance
The equipment complies with the following ADSL standards:
Standard
ITU G.992.1
ITU G.992.3
ITU G.992.5
ITU G.994.1
ETSI TS 101 388
Note
Asymmetric digital subscriber line (ADSL) transceivers
Asymmetric digital subscriber line transceivers 2 (ADSL2)
Asymmetric Digital Subscriber Line (ADSL) transceivers-Extended
bandwidth ADSL2 (ADSL2+)
Handshake procedures for Digital Subscriber Line (DSL)Transceivers
Transmission and Multiplexing (TM); Access transmission systems on
metallic access cables; Asymmetric Digital Subscriber Line (ADSL) –
European specific requirements
13
ZXHN H108N User’s Manual
This equipment complies with FCC radiation exposure limits set forth for
uncontrolled environment .This equipment should be installed and operated with
minimum distance 20cm between the radiator& your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
1.
2.
Customer Information
This equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA. On the bottom of this equipment is a label that contains,
among other information, a product identifier in the format US:
ZTEDL01BH108NV31. If requested, this number must be provided to the
telephone company.
A plug and jack used to connect this equipment to the premises wiring and
telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant telephone cord and modular
plug is provided with this product. It is designed to be connected to a
compatible modular jack that is also compliant. See installation instructions
for details.
14
ZXHN H108N User’s Manual
3.
If this equipment [US: ZTEDL01BH108NV31] causes harm to the telephone
network, the telephone company will notify you in advance that temporary
discontinuance of service may be required. But if advance notice isn't practical,
the telephone company will notify the customer as soon as possible. Also, you
will be advised of your right to file a complaint with the FCC if you believe it
is necessary.
4. The telephone company may make changes in its facilities, equipment,
operations or procedures that could affect the operation of the equipment. If
this happens the telephone company will provide advance notice in order for
you to make necessary modifications to maintain uninterrupted service.
5. If trouble is experienced with this equipment [US: ZTEDL01BH108NV31],
for repair or warranty information, Service can be facilitated through our
office at:
U.S. Agent Company name: Acadia Solutions, Inc
Address: 130 E.Wilson Bridge Road Suite 320 Worthington United State
Tel: 614-505-6135
Fax: 614-505-6135
If the equipment is causing harm to the telephone network, the telephone
company may request that you disconnect the equipment until the problem is
resolved.
6. Please follow instructions for repairing if any (e.g. battery replacement
section); otherwise do not alternate or repair any parts of device except
specified. For repair procedures, follow the instructions outlined under the
safety guidance.
7. Connection to party line service is subject to state tariffs. Contact the state
public utility commission, public service commission or corporation
commission for information.
8. If your home has specially wired alarm equipment connected to the telephone
line, ensure the installation of this [US: ZTEDL01BH108NV31] does not
disable your alarm equipment. If you have questions about what will disable
alarm equipment, consult your telephone company or a qualified installer.
9. If the telephone company requests information on what equipment is
connected to their lines, inform them of:
a)
The ringer equivalence number [0.1B]
b)
The USOC jack required [RJ11C]
c)
Facility Interface Codes (“FIC”) [N/A]
d)
Service Order Codes (“SOC”) [N/A]
e)
The FCC Registration Number [US: ZTEDL01BH108NV31]
10. The REN is used to determine the number of devices that may be connected to
a telephone line. Excessive RENs on a telephone line may result in the devices
15
ZXHN H108N User’s Manual
not ringing in response to an incoming call. In most but not all areas, the sum
of RENs should not exceed five (5.0). To be certain of the number of devices
that may be connected to a line, as determined by the total RENs, contact the
local telephone company. The REN for this product is part of the product
identifier that has the format US:AAAEQ##TXXXX. The digits represented
by ## are the REN without a decimal point. For this product the FCC
Registration number is [US: ZTEDL01BH108NV31] indicates the REN
would be 0.1B
Service Requirements
In the event of equipment malfunction, all repairs should be performed by our
Company or an authorized agent. It is the responsibility of users requiring service to
report the need for service to our Company or to one of our authorized agents.
Service can be facilitated through our office at:
Acadia Solutions, Inc. 130E. Wilson Bridge Road Suite 320 Worthington, OH
43085
16

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Page Count                      : 21
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:55fde186-3f81-48e1-b181-d659b7a01e09
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Create Date                     : 2012:02:03 15:58:37+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2012:02:07 15:50:22-08:00
Metadata Date                   : 2012:02:07 15:50:22-08:00
Document ID                     : uuid:85a36cef-07ea-4a81-b020-67c9023c3f65
Instance ID                     : uuid:a817c3ee-a53c-48f1-b60b-df22f57f08bd
Format                          : application/pdf
Title                           : Microsoft Word - Use manual_ZXHN H108N.DOC
Creator                         : a
Author                          : a
EXIF Metadata provided by EXIF.tools
FCC ID Filing: Q78-ZXHNH108NV31

Navigation menu