ZTE ZXV10W300 Wireless ADSL Router User Manual ZXV10 W300 Wireless ADSL Router User s Manual
ZTE Corporation Wireless ADSL Router ZXV10 W300 Wireless ADSL Router User s Manual
ZTE >
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 576308 |
| Application ID | 4m2jo7qzvNgRRl0/VEUx0Q== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 84.53kB (1056615 bits) |
| Date Submitted | 2005-08-30 00:00:00 |
| Date Available | 2005-08-30 00:00:00 |
| Creation Date | 2005-08-30 16:09:57 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2005-08-30 16:12:10 |
| Document Title | ZXV10 W300 Wireless ADSL Router User's Manual |
| Document Creator | Acrobat PDFMaker 7.0 für Word |
| Document Author: | transing |
ZXV10 W300 Wireless ADSL Router User's Manual ZTE CORPORATION ZXV10 W300 Wireless ADSL Router User's Manual Manual version 20050530-R1.0 Product version V1.0 Copyright © 2003 ZTE Corporation All rights reserved. No part of this documentation may be excerpted, reproduced, translated, annotated or duplicated, in any form or by any means without the prior written permission of ZTE CORPORATION. ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, P. R. China Website: http://support.zte.com.cn Post code: 518057 Customer Support 800-830-1118 Fax: 86-0755-26770801 E-mail: doc@zte.com.cn S.N.: ××××××× Center: 86-0755-26770800 Suggestions and Feedback To improve the quality of ZTE product documentation and offer better services to our customers, we hope you can give us your suggestions and comments on our documentation and fax this form to 0086-755-26770160; or mail to “ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, P. R. China”. Our postcode is 518057. Document Name Product version ZXV10 W300 Wireless ADSL Router User's Manual Document V1.0 version 20050530-R1.0 Equipment installation time Your information Name Company Company Postcode address Telephone E-mail Your Good evaluation of Overall this Instructiveness documentation Index Correctness Completeness Structure Illustration Fair Average Poor Bad Readability Overall Your Instructiveness suggestion on Index the Correctness improvement Completeness of Structure this documentation Illustration Readability Your other suggestions on ZTE product documentation Contents 1 OVERVIEW.................................................................... 1 1.1 FEATURES ......................................................................................... 1 1.2 PACKING ........................................................................................... 3 1.3 SYSTEM REQUIREMENT.................................................................... 4 1.4 RF SAFETY ....................................................................................... 4 2 ZXV10 W300 HARDWARE .......................................... 5 2.1 EXTERNAL VIEW .............................................................................. 5 2.2 INDICATORS AND PORTS ................................................................... 6 3 FAST INSTALLATION.................................................. 9 3.1 HARDWARE CONNECTIONS .............................................................. 9 3.2 ZXV10 W300 FACTORY DEFAULTS................................................ 12 3.3 COMPUTER SETUP .......................................................................... 12 4 WIZARD ....................................................................... 15 4.1 LOGGING ON TO THE ZXV10 W300 DEVICE .................................. 15 4.2 CONFIGURING VPIS AND VCIS....................................................... 16 4.3 SELECTING CONNECTION TYPES .................................................... 17 4.4 SETTING CONFIGURATIONS ............................................................ 18 4.5 DISPLAYING CONFIGURATION DATA .............................................. 24 4.6 OTHER COMMON CONFIGURATIONS .............................................. 25 4.6.1 UPnP....................................................................................... 25 4.6.2 DMZ ....................................................................................... 26 5 TECHNICAL SPECIFICATIONS.............................. 30 5.1 HARDWARE SPECIFICATIONS .......................................................... 30 5.2 SOFTWARE SPECIFICATIONS ........................................................... 31 6 TROUBLESHOOTING ............................................... 34 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 1 Overview Thank you for using ZTE’s ZXV10 W300 Wireless ADSL Router. Please read this manual carefully before using the product. ZXV10 W300 is an enhanced wireless ADSL use-end access device providing uplinks in multiple line transmission modes. It provides four 10/100Base-T Ethernet interfaces, one 802.11g/b wireless interface and one USB interface (optional). ZXV10 W300 provides the users with broadband Internet or enterprise network access services via high-speed ADSL/ADSL2/ADSL2+ access. ZTE CORPORATION reserves the right to modify technical specifications in this manual without any notification in advance. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 1.1 Features Provide ADSL/ADSL2/ADSL2+ high-speed Internet access over ordinary telephone lines. Support G.992.1, G.992.2, G.992.3, G.992.5, T1.413 Provide four 10/100Base-T Ethernet interfaces ZXV10 W300 Wireless ADSL Router User's Manual supporting automatic identification of crossover cable and straight-through cable. Provide one IEEE 802.11g/b wireless interface Provide one USB Slave interface (optional) Provide wireless data security using WEP-64, WEP-128, WEP-256, WPA-PSK and MAC address filtering Provide functional features including subscriber isolation, ESSID hiding and multi-ESSID Support Bridge and Router modes Support eight PVC connections and auto-negotiation Support RFC 2684 and PPPoE bridging function Support RFC2684 routing and IPoA, PPPoA and PPPoE dial-up Support NAT and IP filtering functions, with built-in firewall. Support network configuration using DHCP Support UPnP, SNTP, DMZ, IGMP Proxy and DNS Proxy functions Support ATM QoS and IP QoS functions Support configuration management via web and SNMP Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. High reliability, ease of use and low power consumption High compatibility and interoperability with various office-end DSLAMs Note: Corresponding ISP services are required for the above functions. 1.2 Packing The device list in the package contains: ZXV10 W300 Wireless ADSL Router External splitter Power supply adapter Telephone lines Straight-through cable Warranty card Certificate of Quality ZXV10 W300 Wireless ADSL Router User’s Manual ZXV10 W300 Wireless ADSL Router User's Manual 1.3 System Requirement Before using ZXV10 W300, please ensure the following system requirement: ADSL service has been subscribed. Your ADSL Service Provider must provide you with at least 1 legal IP address (allocated dynamically via dial-up or statically) One or more PCs with 10M/100M Ethernet Network Interface Card (NIC) For wireless access, an external or built-in 802.11g/b wireless NIC is required. To set up the system via web, a browser is required, e.g. Internet Explorer V5.0 or later, or Netscape V4.7 or later. 1.4 RF safety FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 2 ZXV10 W300 Hardware 2.1 External View See FIGURE 1 for the external view. FIGURE 1 ZXV10 W300 External View ZXV10 W300 Wireless ADSL Router User's Manual 2.2 Indicators and Ports See TABLE 1 for the front panel indicator description. TABLE 1 FRONT PANEL INDICATOR DESCRIPTION Indicator Color Red Green Green Functions Steady ON: Indicates power-on. OFF: Indicates power-off or failure Steady ON: The device is connected to the Internet via successful built-in dial-up. Slow flashing: Indicates the device operates normally. OFF: Indicates an operation failure. Steady ON: Indicates WLAN enabled. Flashing: Green Indicates data sending/receiving on the WLAN port. OFF: Indicates WLAN disabled. Steady ON: Indicates LAN1 connection established. Green Flashing: Indicates data sending/receiving on the LAN1 port. OFF: Indicates no connection is established on the LAN1 port. Steady ON: Indicates LAN2 connection established. Green Flashing: Indicates data sending/receiving on the LAN2 port. OFF: Indicates established on the LAN2 port. no connection is Fehler! Formatvorlage nicht definiert. Indicator Fehler! Formatvorlage nicht definiert. Color Functions Steady ON: Indicates LAN3 connection established. Green Flashing: Indicates data sending/receiving on the LAN3 port. OFF: Indicates no connection is established on the LAN3 port. Steady ON: Indicates LAN4 connection established. Green Flashing: Indicates data sending/receiving on the LAN4 port. OFF: Indicates no connection is established on the LAN4 port. Steady ON: Indicates an ADSL connection is established and activated. Slow flashing: Indicates a Green connection is being established on the ADLS line. OFF: Indicates no ADSL connection can be established. See TABLE 2 for the back panel port description. TABLE 2 BACK PANEL PORT DESCRIPTION Port Functions Power For connecting the power adaptor On/Off Power On/Off When the device is powered on and activated, inserting a needle in the hole Reset and pressing it for more than 10 seconds will reset the device to the factor defaults. Wi-Fi WLAN radio frequency ON/OFF LAN1~4 NIC connected to a PC via RJ45 cable DSL Connected to the ADSL line or splitter via RJ11 telephone line ZXV10 W300 Wireless ADSL Router User's Manual This page is intentionally blank. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 3 Fast Installation This chapter tells you how to connect the ZXV10 W300 to a PC, Intranet or the Internet. It is assumed that you have signed up for the ADSL service from the Service Provider. In addition, this chapter contains only basic product setup, which is applicable to the network environment of general subscribers or enterprise users. 3.1 Hardware Connections It is recommended to install the device in practical applications according to the first sample. Note: You can install the device according to the second sample if the first sample is not applicable. A voice filter (which cannot be replaced by the splitter) should be installed near the telephone line terminal. Phone sets connected in parallel before the splitter will cause many problems, e.g. the ZXV10 W300 device cannot be connected to office-end devices; networks cannot be accessed or the network access speed will be slow. To connect phone sets before the splitter, a voice filter should be connected in serial before the phone sets. (In general, ZXV10 W300 Wireless ADSL Router User's Manual only one voice filter can be connected before the splitter to reduce interference) To connect the ZXV10 W300 device: 1. Connect the DSL port to the MODEM port of the splitter using a telephone line. Connect a phone set to the phone port of the splitter using another telephone line, and then connect the subscriber telephone line providing the ADSL service to the LINE port of the splitter, as shown in FIGURE 2 and FIGURE 3. The splitter has three ports, including: LINE: Port connected to the subscriber telephone line providing the ADSL service MODEM: Port connected to the DSL port of the ZXV10 W300 device PHONE: Port connected to a phone set. 2. Connect the LAN port of the device to a PC with a NIC using an RJ45 cable. 3. Connect the power adapter to the Power port of the device, and plug the adapter to the AC power outlet. The device will be powered on and operate after you pushing the power switch button. Note: You can only use the power adapter provided with the ZXV10 W300 device. Using other power adapter may damage the device or cause device operation failures. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. FIGURE 2 Installation sample 1: When the splitter is installed on the telephone line port RJ-11 RJ-45 Power Adapter MODEM LINE Splitter Line with ADSL Service PHONE Power Outlet PHONE PHONE PC FIGURE 3 Installation sample 2: When the Splitter is Installed near the Modem RJ-11 RJ-45 MODEM LINE Line with ADSL Service Splitter Power Adapter PHONE MicroFi l ter Power Outlet PHONE 11 PHONE PHONE PC ZXV10 W300 Wireless ADSL Router User's Manual 3.2 ZXV10 W300 Factory Defaults Factory defaults are as follows: Device IP address: 192.168.1.1; Subnet mask: 255.255.255.0 Use DHCP server by default. The IP address can be obtained from the device via DHCP. Line coding AUTO (T1.413/G.DMT/G.LITE/ADSL2/ADSL2+ auto-sensing) Note: In the case that the device doesn’t work due to configuration errors or the password is forgot, insert a needle into the Reset hole on the back of the device and push the button for more than 10 seconds to reset all the device configurations to the factory defaults. 3.3 Computer Setup If your computer uses Windows 95/98/ME/2000/XP, set up your computer using the following two methods of which the first one is recommended. The following examples use Windows XP as the operating system. The setup of computers using other operating systems is similar. 1. The PC can obtain an address from the device via DHCP. 1) From the Windows taskbar, select Start > Control Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Panel. 2) Double-click the Network Connection icon. 3) From the right-button menu, select Local Area Connection > Properties. Select Internet Protocol (TCP/IP) > Properties. 4) From the Internet Protocol (TCP/IP) Properties dialog box: Ensure that Obtain IP address Automatically is checked. Ensure that Obtain DNS server address automatically is checked. 5) 2. Click OK twice to confirm and save your settings. Configure the PC to use a static address: 1) From the Windows taskbar, select Start > Control Panel. 2) Double-click the Network Connection icon. 3) From the right-button menu, select Local Area Connection > Properties. Select Internet Protocol (TCP/IP) > Properties. 4) In the Internet Protocol (TCP/IP) Properties dialog box, click Use the following IP address to specify the local computer's IP address to the same network segment as the LAN port address of the device, i.e. 192.168.1.x (in which the "x" is a decimal integer between 2~254). For example, 192.168.1.2, subnet mask 255.255.255.0. The Default Gateway is set to 13 ZXV10 W300 Wireless ADSL Router User's Manual 192.168.1.1. 5) Configure Use the following DNS server addresses. To set the DNS server IP addresses, please contact your local Service Provider, or set it to 192.168.1.1. 6) Click OK twice to confirm and save your settings. After the completion of the above configuration: 1. If the device is set to the Bridging mode, you can access the Internet according to the service provided by the Service Provider. 2. If the device is set to the Routing mode, you can access the Internet directly after a connection is established between the ZXV10 W300 device and the office-end device. 3. To check the device configurations, visit http://192.168.1 via a browser and log on to the device. Logged users are classified into 2 levels: Administrator level, with "admin" as both username and initial password. All functions of the ZXV10 W300 can be set up. General user level, with "public" as both username and initial password. General users can only monitor the operating status of the device. Note: Be sure to remember the password of the ZXV10 W300. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4 Wizard Configuring the ZXV10 W300 device requires professional technical knowledge and experience. To simplify your procedures, it is recommended to use the Wizard. In the Wizard, you need to configure only few data to establish a connection and enable the basic functions. However, to use advanced functions of the device, you need to configure other options. 4.1 Logging on to the ZXV10 W300 Device Visit http://192.168.1.1 via a browser and log on to the ZXV10 W300. Select Wizard to complete the basic configurations, as shown in FIGURE 4. FIGURE 4 Logging on to the ZXV10 W300 Device 15 ZXV10 W300 Wireless ADSL Router User's Manual 4.2 Configuring VPIs and VCIs This page displays the default values. Please set up using the data provided by your local Service Provider. After the setup, click the Next button in the window, as shown in FIGURE 5. FIGURE 5 PVC Setting Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4.3 Selecting Connection Types Seven types of connections are supported, including PPPoA, PPPoE, Static Bridged, Static Routed, DHCP, Bridge and CLIP, as shown in FIGURE 6. Select the type of connection to be established in this window. 17 ZXV10 W300 Wireless ADSL Router User's Manual FIGURE 6 Connection Type After selecting an option, click Next to set the next options. To modify the previous options, click Back to return to the previous step. 4.4 Setting Configurations Go to the configuration page depending on the connection type selected. Data to be configured including: 1. Set the username and password, as shown in Fehler! Formatvorlage nicht definiert. FIGURE 7. 19 Fehler! Formatvorlage nicht definiert. ZXV10 W300 Wireless ADSL Router User's Manual FIGURE 7 PPP Username and Password The Username and Password should be configured according to the data provided by your local Service Provider. 2. LAN settings, as shown in FIGURE 8. FIGURE 8 LAN Settings Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. This page configures the ZXV10 W300 IP address and subnet mask on the LAN side. Do not modify the configurations in this page if there are no special requirements. 3. WAN settings, as shown in FIGURE 9. FIGURE 9 WAN Setting This page configures the ZXV10 W300 IP address and subnet mask on the WAN side. 4. Wireless setup 1) Basic wireless LAN settings: Set basic data, as shown in 21 ZXV10 W300 Wireless ADSL Router User's Manual FIGURE 10. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. FIGURE 10 Wireless Setup 2) Wireless LAN WEP security setup: Configure data for WEP encryption, as shown in FIGURE 11. FIGURE 11 Wireless Security 23 ZXV10 W300 Wireless ADSL Router User's Manual 4.5 Displaying Configuration Data Pages displayed are different depending on the connections you configured. FIGURE 12 Summary FIGURE 12 shows the window that will appear when the PPPoE configuration is completed. Click Submit to enable the configuration. In the seven types of connections: Configure PPPoA and PPPoE in this order: PVC Setting > Connection Type > PPP Username and Password > LAN Settings > Wireless Setup > Summary Configure Static Bridged, Static Routed and CLIP in this order: Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. PVC Setting > Connection Type > WAN Setting > LAN Settings > Wireless Setup > Summary. Configure DHCP and Bridge in this order: PVC Setting > Connection Type > LAN Settings > Wireless Setup > Summary After successful configurations, a configuration successful window appears as shown in FIGURE 13. FIGURE 13 Configuration Successful Window 4.6 Other Common Configurations 4.6.1 UPnP When the ZXV10 W300 device operates in Routing mode, if the terminal user use special applications like BitComet or BitSpirit, the UpnP function should be enabled to optimize the device performance. To configure this function: 25 ZXV10 W300 Wireless ADSL Router User's Manual Log on to the device using the username “admin”. Click the Advanced button on the web page to enter the Advanced -> UpnP page, as shown in FIGURE 14. FIGURE 14 Advanced->UPnP Click UpnP on the left side of the page to enter the UPnP configuration page. In this page, enable or disable the UPnP function and specify the UPnP WAN and LAN connections. To enable this function, check the Enable UPnP check box. 4.6.2 DMZ When the device operates in Routing mode, if you try to access a service on a host placed in the intranet from an external network, the DMZ host function should be enabled. To configure this function: Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Log on to the device using the username “admin”. Click the Advanced button on the web page to enter the Advanced -> UpnP page, Click Port Forwarding on the left side of the page to enter the Port Forwarding page, as shown in FIGURE 15. FIGURE 15 Advanced Configuration of the DMZ Host Function To set DMZ, click the DMZ in this page. Select the LAN host IP address to be accessed from the WAL side. Check the Enable DMZ check box to enable this function, as shown in 27 ZXV10 W300 Wireless ADSL Router User's Manual FIGURE 16. Fehler! Formatvorlage nicht definiert. FIGURE 16 DMZ Setting 29 Fehler! Formatvorlage nicht definiert. ZXV10 W300 Wireless ADSL Router User's Manual 5 Technical Specifications 5.1 Hardware Specifications 1. ADSL interface Compatible standards: ANSI T1.413, ITU G.992.1, ITU G.992.2, ITU G.992.3, and ITU G.992.5 Line impedance: 100 Ω Connection line: A pair of ordinary telephone lines Connector: RJ-11 2. LAN interface Interface: 4 10/100 Base-T, IEEE 802.3/802.3u Connector: RJ-45 Automatic recognition of crossover cable and straight-through cable 3. WLAN interface Operating band: 2.4GHz – 2.4835GHz (varies depending on country and area) Compatible standards: IEEE 802.11g, IEEE 802.11b Rates: 1/2/5.5/11/6/9/12/18/24/36/48/54Mbps 4. USB port: USB 2.0 Slave (optional) 5. Operation and Maintenance WEB and SNMP Fehler! Formatvorlage nicht definiert. 6. Fehler! Formatvorlage nicht definiert. Power supply Power adapter: 220 VAC input, 50Hz, 18VAC 500mA output Power: < 9 W 7. Safety CCC, CE 5.2 Software Specifications 1. ATM VPI: 0-255; VCI: 32-65535 Support 8 PVC connections and auto-negotiation ATM Cell over ADSL, AAL5 Support UBR, CBR and VBR Support OAM F4/F5 IPoA PPPoA PPPoE 2. Bridging Transparent bridging (IEEE 802.1D) RFC 2684 Spanning-tree protocol (IEEE 802.1D) 31 ZXV10 W300 Wireless ADSL Router User's Manual Support 2048 MAC learning addresses Support bridge filter 3. Routing Static routing Dynamic routing NAT, ALGs Firewall DNS Proxy, IGMP Proxy UPnP DMZ 4. Network management WEB SNMP 5. WLAN IEEE 802.11g/b WEP, WPA-PSK and MAC address filtering Hidden ESSID, multiple ESSID domains Subscriber isolation Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. This page is intentionally blank. 5-33 6 Troubleshooting This chapter describes how to troubleshoot problems in the device installation and operations. For other problems not contained in this chapter, please contact your Service Provider for help. Problem Troubleshooting The indicator is OFF Make sure that you use the power adapter included in the when the device is package and the adapter is connected properly to the device powered on and power outlet on the wall Make sure you use standard telephone lines (e.g. those contained in the device package). Make sure the lines are DSL indicator is OFF connected properly according to the hardware connection when the telephone procedure described in Chapter 3. Check all the ports to line is connected see if there are any loose connections. Wait for 30 seconds for the device to establish a connection to your ADSL Service Provider. When the telephone line is connected, the DSL indicator alternates between slow and fast flashing. The symptom indicates the failed connection between the device and the office-end ADSL. Please make sure the ZXV10 W300 device has been installed properly according to the samples. (See the installation samples) The first sample is recommended. If you use the second sample, please make sure a voice filter is installed properly. LAN indicator is OFF Make sure the Ethernet cable is connected properly to the when hub/computer and the device. Make sure the computer/hub the Ethernet cable is connected is powered on. WLAN unable to be Make sure the WLAN radio frequency is turned on and the connected WLAN indicator is ON. Fehler! Formatvorlage nicht definiert. Problem Fehler! Formatvorlage nicht definiert. Troubleshooting Use the Ping command to check if the network interface IP address (preset to 192.168.1.1) of the device can be pinged from the computer. If not, check the Ethernet cable connection. Check if the indicator status is normal. If the computer uses a private IP address (not a registered illegal IP) specified manually, please check: If the computer’s gateway IP address is an illegal address. If not, use a correct gateway, or set the computer to obtain PC unable to access the network IP information automatically. Contact your ADSL Service Provider to confirm the DNS server designated for the computer is valid. Otherwise, use the correct DNS, or set the computer to obtain IP information automatically. Make sure you have set the NAT rule to convert the private IP address into the legal address. The computer IP address you specified must be contained in the range set in the NAT rule. A problem may occur in the office-end device of the ADSL Service Provider. Unable to browse Internet web pages on the computer 35 Make sure the DNS server designated for the computer is correct. You can use the Ping command to check if the computer can be connected to the DSN server of the ADSL Service Provider.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Tagged PDF : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : Acrobat PDFMaker 7.0 für Word Modify Date : 2005:08:30 16:12:10+02:00 Create Date : 2005:08:30 16:09:57+02:00 Metadata Date : 2005:08:30 16:12:10+02:00 Format : application/pdf Title : ZXV10 W300 Wireless ADSL Router User's Manual Creator : transing Document ID : uuid:76bc4dfb-e55f-4e4c-bbb5-f05f99db2e1c Instance ID : uuid:346cd387-42e4-429a-8b0b-1529998c933f Company : zte Source Modified : D:20050830193804 Page Count : 43 Page Layout : OneColumn Author : transingEXIF Metadata provided by EXIF.tools