Zebra Technologies CDRDB 802.11 a/b/g/n/ac radio module User Manual
Zebra Technologies Corporation 802.11 a/b/g/n/ac radio module Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2909914 |
| Application ID | NE22TFAIHrl7Rg/HjnPa2A== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | Yes |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 45.89kB (573609 bits) |
| Date Submitted | 2016-02-05 00:00:00 |
| Date Available | 2016-08-23 00:00:00 |
| Creation Date | 2017-11-18 20:03:04 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-11-18 20:03:04 |
| Document Title | Microsoft Word - Regulatory_Guide_Radio module_CDRDB_2-23-16 |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | KMV368 |
1. Regulatory Information For devices with Symbol, or Symbol Technologies Inc., etc. on the Manufacturing Label and for devices manufactured at Reynosa, or any other Zebra factory facilities: This device is approved under Zebra Technologies Corporation. This guide applies to Model Number : CDRDB All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold and will be labeled as required. Local language translations are available at the following website: www.zebra.com/support. Any changes or modifications to Zebra equipment not expressly approved by Zebra could void the user’s authority to operate the equipment. Zebra devices are professionally installed — the Radio Frequency Output Power will not exceed the maximum allowable limit for the country of operation. Antennas: Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could cause damage and may violate regulations. This device is only to be used with a Zebra Wireless Switch. For use only with Zebra approved and UL Listed mobile computers, Zebra approved, and UL Listed/Recognized battery packs 2. Wireless Device Country Approvals Note: This section is only applicable to WW/WR/EU configurations. Regulatory markings subject to certification are applied to the device signifying the radio(s) is/are approved for use in the following countries and continents: United States, Canada, Japan, China, South Korea, Australia, and Europe. Please refer to the Declaration of Conformity (DoC) for details of other country markings. This is available at: http://www.zebra.com/doc. Note: Europe includes Austria, Belgium, Bulgaria, Croatia, Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom. Caution: Operation of the device without regulatory approval is illegal. Country Selection Select only the country in which the device will be used. Any other selection will make the operation of this device illegal. Country Roaming This device incorporates the International Roaming feature (IEEE802.11d), which will ensure the product operates on the correct channels for the particular country of use. Frequency of Operation – IC 5 GHz Only: The use in the UNII (Unlicensed National Information Infrastructure) band 1 (5150-5250 MHz) is restricted to Indoor Use Only; any other use will make the operation of this device illegal. Industry Canada Statement: Caution: The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-Channel mobile satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. Zebra Technologies Corporation Zebra Confidential Restricted Regu ulatory Guide (RG) Rev. A Avertissement: Le dispositive fonc nctionnant dans la bande 5150-5250 MHz est réservé uniqu iquement pour une utilisation à l'intérieur afin de réduire les risqu ques de brouillage préjudiciable aux systèmes de satellites s mobiles utilisant les mêmes canaux. Les utilisateurs de e radars de haute puissance sont désignés utilisateurs prin rincipaux (c.-à-d., qu'ils ont la priorité) pour les bands 5250-535 350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN N-EL. 2.4 GHz Only: The available channels for 802.11 b/g operatio ion in the US are Channels 1 to 11. The range of channels ls is limited by firmware. Warnings for Use of Wireless Devices Caution: Please observe all warning ing notices with regard to the usage of wireless devices. Potentially Hazardous Atmospheres – F Fixed Installations You are reminded of the need to observe restr trictions on the use of radio devices in fuel depots, chemica cal plants etc. and areas where the air contains chemicals or particles ssuch as grain, dust, or metal powders. Safety in Aircraft Switch off your wireless device whenever you ua are instructed to do so by airport or airline staff. If your dev evice offers a ‘flight mode’ or similar feature, consult airline staff as to itss u use in flight. Safety in Hospitals Wireless devices transmit radio frequency ene ergy and may affect medical electrical equipement. Wireless devices should be switched off where rever you are requested to do so in hospitals, clinics, or hea ealthcare facilitlies. These requests are designed to prevent possible inte terference with sensitive medical equipement. Wireless devices transmit radio frequency ene ergy and may affect medical electrical equipment. When installed ins adjacent to other equipment, it is advised to verify that the adjac acent equipment is not adversely affected. Pacemakers Pacemaker manufacturers recommended that at a minimum of 15cm (6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interferenc nce with the pacemaker. These recommendations are consi sistent with independent research and recommendations by Wireless Te Technology Research. Persons with Pacemakers: • Should ALWAYS keep the device mo ore than 15cm (6 inches) from their pacemaker when turne ned ON. • Should not carry the device in a breas ast pocket. • Should use the ear furthest from the ep pacemaker to minimise the potential for interference. • If you have any reason to suspect tha hat interference is taking place, turn OFF your device. Zebra Technologies Corporation Zebra Confidential Restricted Page 2 of 8 Regu ulatory Guide (RG) Rev. A Other Medical Devices Please consult your physician or the manufactu cturer of the medical device to determine if the operation of your may interfere with the medical device. wireless product RF Exposure Guidelines Safety Information • Reducing RF Exposure – Use Prop perly Only operate the device in accordanc nce with the instructions supplied. • International The device complies with internationa nally recognized standards covering human exposure to ele lectromagnetic fields from radio devices. For information on ’Inte ternational‘ human exposure to electromagnet fields, referr to t the Zebra Declaration of Conformity (DoC) at http://www.zeb ebra.com/doc. For further information on the safetyy o of RF energy from wireless devices, see http://responsibility.zebra.com/index.php/ php/downloads/, which is located under Wireless Communic ications and Health. US and Canada Co-located statement To comply with FCC RF exposure co compliance requirement, the antenna used for this transmit itter must not be co-located or operating in conjunction with any o other transmitter/antenna except those already approved in this filling. To satisfy US and Canadian RF ex exposure requirements, a transmitting device must operate e with w a minimum separation distance of XX cm or more from a person’s body. The minimum separa ration distance 35 cm must match the dis istance established in the SAR Test report. Pour satisfaire aux exigences Amé éricaines et Canadiennes d'exposition aux radio fréquence ces, un dispositif de transmission doit fonct ctionner avec une distance de séparation minimale de XX cm c ou plus de corps d'une personne. Radiation Exposure Statement: This equipment complies with IC ra radiation exposure limits set forth for an uncontrolled enviro ronment. This equipment should be installed and operated w with minimum distance 35 cm between the radiator and you our body. isation de dispositifs mobiles) NOTE IMPORTANTE: (Pour l'utilisa Déclaration d'exposition aux radiati ations: Cet équipement est conforme auxx llimites d'exposition aux rayonnements IC établies pour un n environnement non contrôlé. Cet équipement doit être e iinstallé et utilisé avec un minimum de 35 cm de distance entre la source de rayonnement et votre corps. Zebra Technologies Corporation Zebra Confidential Restricted Page 3 of 8 Regu ulatory Guide (RG) Rev. A Remote and Standalone Anten nna Configurations To comply with FCC RF exposur ure requirements, antennas that are mounted externally att remote locations or operating near users at stand-alo lone desktop of similar configurations must operate with a minimum separation distance of 35 cm from all person ons. To comply with FCC Antenna req equirements, the Antenna must be adjust such that the RF F emission lobes are below 30 degrees elevation. 3. Radio Frequency Interfere rence Requirements- FCC Note: This equipment has been tested and fou ound to comply with the limits for a Class B digital device, pursuant pu to Part 15 of the FCC rules. These limits are designed to provid ide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radia iate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that th interference will not occur in a particular installation. If this equipme ment does cause harmful interference to radio or television n reception, which can be determined by turning the equipment off and o on, the user is encouraged to try to correct the interference ce by one or more of the following measures: • • • • Reorient or relocate the receiving ante ntenna. Increase the separation between the e equipment and receiver. Connect the equipment into an outlet et on a circuit different from that to which the receiver is con nnected. Consult the dealer or an experienced d radio/TV technician for help. Note: This equipment has been tested and fou ound to comply with the limits for a Class A digital device pursuant pu to Part 15 of the FCC rules. These limits are designed to provid ide reasonable protection against harmful interference when en the equipment is operated in commercial environment. This equ quipment generates, uses, and can radiate radio frequency y energy and, if not installed and used in accordance with the instr truction manual, may cause harmful interference to radio communications. co Operation of this equipment in a residential area is likely ly tto cause harmful interference in which case the user willl be b required to correct the interference at his own expense. Radio Transmitters (Part 15) This device complies with Part 15 of the FCC R Rules. Operation is subject to the following two conditions: s: (1) this device may not cause harmful interference, and (2) this device ce must accept any interference received including interfere rence that may cause undesired operation. When the radio is configured for outdoor opera ration, EIRP will be limited to below 21dBm based on the antenna an gain and elevation gain entered. The software automatically restri tricts the output power to the certified levels when the profes fessional installer selects the approved antenna that is being used. Zebra Technologies Corporation Zebra Confidential Restricted Page 4 of 8 Regu ulatory Guide (RG) Rev. A SET BRAND MODEL NUM UMBER ANTENNA TYPE CONNECTOR INDOOR/OUTD UTDOOR 1 Zebra CEDAR-INT-A T-ANT Monopole U.FL indoor/outdoo door Note: Antenna Gain (dBi) Set 2.4G 2.4G Chain1 Chain2 Chain3 Chain1 Chain2 Chain3 4.1 4.4 4.4 5.9 5.4 5. 5.9 2.4GHz 5GHz UNII-1 / indoor 5GHz UNII-1 / outdoor 5GHz UNII-1 / outdoor Maxim aximum conducted powe ower(dBm) 26.28 22.79 16.88 16.88 Above 30 degree 5GHz UNII-2A 5GHz UNII-2C 5GHz UNII-3 4. 21.91 22.41 22.84 Antenna Gain(dBi) 4.4 5.9 5.9 4.1 5.9 5.9 5.9 Maxim aximum EIRP power wer(dBm) 30.68 28.69 22.78 20.98 27.81 28.31 28.74 Radio Frequency Interfere rence Requirements- Canada CAN ICES-3 (B)/NMB-3(B) Radio Transmitters For RLAN Devices: The use of 5 GHz RLAN’s, for use in Canada, have the following restrictions: • Restricted Band 5.60 – 5.65 5 GHz This device is in compliance with h the NRC for Industry Canada applicable to license-exemp pt radios. Use is allowed with the following two conditions: s: (1) the device must not produce interference, and (2) the e the t device must accept any interference to the radio even if th the interference is likely to compromise operation. Le présent appareil est conforme e aux CNR d'Industrie Canada applicables aux appareils radio ra exempts de licence. L'exploitation est autorisée aux de deux conditions suivantes : (1) l'appareil ne doit pas produir uire de brouillage, et (2) l'utilisateur de l'appareil doit accep epter tout brouillage radio électrique subi même si le brouill illage est susceptible d'en compromettre le fonctionnement. Label Marking: The Term ‘IC:’ before the radio dio certification only signifies that Industry Canada technical al specifications were met. Zebra Technologies Corporation Zebra Confidential Restricted Page 5 of 8 Regu ulatory Guide (RG) Rev. A In accordance with the regulations ns of Industry Canada, this radio transmitter can operate with wi an antenna of a type and a maximum gain (or lower) ap approved for the transmitter by Industry Canada. With the aim a of reducing the risk of radio interference to other users,, tthe chosen antenna type and it gain should be selected so that the equivalent isotropically radiated power (e.i.r.p .r.p.) does not exceed the intensity necessary for the establi blishment of a satisfactory connection. Conformément à la réglementatio tion d'Industrie Canada, le présent émetteur radio peut fonct ctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada da. Dans le but de réduire les risques de brouillage radio électriq trique à l'intention des autres utilisateurs, il faut choisir le typ ype d'antenne et son gain de sorte que la puissance isotrope ra rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire né à l'établissement d'une communication satisfaisante nte. has been approved by Industry Canada to operate with the e antenna types listed below This radio transmitter (CDRDB) ha and having a maximum gain allow owable and the impedance required for each type of antenn na. The antenna types not included in this list, or whose gain in is higher than the maximum gain indicates, are strictly prohibited pro for the operation of the transmitter. The antenna list and types are included in the following tables: SET BRAND MODEL NUM UMBER ANTENNA TYPE CONNECTOR INDOOR/OUTD UTDOOR 1 Zebra CEDAR-INT-A T-ANT Monopole U.FL indoor/outdoo door Note: Set Antenna Gain (dBi) 2.4G 2.4G Chain1 Chain2 Chain3 Chain1 Chain2 Chain3 4.1 4.4 4.4 5.9 5.4 5. 5.9 Le présent émetteur radio (identifi tifier le dispositif par son numéro de certification ou son num umérode modèle s'il fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner ave vec les types d'antenne énumérés ci-dessous et ayant un n gain admissible maximal et l'impédance requise pour cha haque type d'antenne. Les types d'antenne non inclus danss ccette liste ou dont le gain est supérieur au gain maximal indiqué, in sont strictement interdits pour l'exploitation de l'ém metteur. Zebra Technologies Corporation Zebra Confidential Restricted Page 6 of 8 Regu ulatory Guide (RG) Rev. A Statement of Compliance Zebra hereby declares that this device is in com ompliance with the essential requirements and other releva ant provisions of Directive 1999/5/EC and 2011/65/EU. A Declaration of Conformity may be obtained from http://www.zebra.com/d /doc. 5. Waste Electrical and Elect ctronic Equipment (WEEE) English: For EU Customers: Allll products at the end of their life must be returned to Zebra ra for recycling. For information on how to return prod oduct, please go to: www.zebra.com/weee. Français: Clients de l'Union Euro uropéenne: Tous les produits en fin de cycle de vie doiventt être ê retournés à Zebra pour recyclage. Pour de pl plus amples informations sur le retour de produits, consulte ltez : www.zebra.com/weee. nión Europea: todos los productos deberán entregarse a Zebra Ze al final de su Español: Para clientes en la Uni ciclo de vida para que sean recic iclados. Si desea más información sobre cómo devolver un producto, visite: www.zebra.com/weee. Български: За клиенти от ЕС: С След края на полезния им живот всички продукти трябва трябв да се връщат на Zebra за рециклиране. За инфор нформация относно връщането на продукти, моля отидете дете на адрес: www.zebra.com/weee. Deutsch: Für Kunden innerhalb lb der EU: Alle Produkte müssen am Ende ihrer Lebensdaue uer zum Recycling an Zebra zurückgesandt werden. Inf Informationen zur Rücksendung von Produkten finden Sie unter www.zebra.com/weee. tti i prodotti che sono giunti al termine del rispettivo ciclo dii vita v devono essere Italiano: per i clienti dell'UE: tutti restituiti a Zebra al fine di consen entirne il riciclaggio. Per informazioni sulle modalità di restitu tituzione, visitare il seguente sito Web: www.zebra.c .com/weee. Português: Para clientes da UE: E: todos os produtos no fim de vida devem ser devolvidos s à Zebra para reciclagem. Para obter informaçõ ções sobre como devolver o produto, visite: www.zebra.com om/weee. Nederlands: Voor klanten in de eE EU: alle producten dienen aan het einde van hun levensdu duur naar Zebra te worden teruggezonden voor recy cycling. Raadpleeg www.zebra.com/weee voor meer inform rmatie over het terugzenden van producten. Polski: Klienci z obszaru Uniiii Europejskiej: Produkty wycofane z eksploatacji nale¿y zwróciæ zw do firmy Zebra w celu ich utylizacji. Informacje n na temat zwrotu produktów znajduj¹ siê na stronie interneto towej www.zebra.com/weee. Čeština: Pro zákazníky z EU: Vš Všechny produkty je nutné po skonèení jejich životnosti vrát átit spoleènosti Zebra k recyklaci. Informace o zpùsobu bu vrácení produktu najdete na webové stránce: www.zebra ra.com/weee. Eesti: EL klientidele: kõik tooted d tuleb nende eluea lõppedes tagastada taaskasutamise ee esmärgil Zebra'ile. Lisainformatsiooni saamiseks too oote tagastamise kohta külastage palun aadressi: www.zeb bra.com/weee. Magyar: Az EU-ban vásárlóknak ak: Minden tönkrement terméket a Zebra vállalathoz kell elju ljuttatni újrahasznosítás céljából. A termé ék visszajuttatásának módjával kapcsolatos tudnivalókért rt látogasson el a www.zebra.com/weee weboldalra lra. Svenska: För kunder inom EU:: A Alla produkter som uppnått sin livslängd måste returneras s till Zebra för återvinning. Information om hurr d du returnerar produkten finns på www.zebra.com/weee. Suomi: Asiakkaat Euroopan unio nionin alueella: Kaikki tuotteet on palautettava kierrätettäväk äksi Zebra-yhtiöön, kun tuotetta ei enää käytetä. Lisätieto toja tuotteen palauttamisesta on osoitteessa www.zebra.co om/weee. Dansk: Til kunder i EU: Alle prod odukter skal returneres til Zebra til recirkulering, når de er udtjent. ud Læs oplysningerne om returnering aff p produkter på: www.zebra.com/weee. Ελληνικά: Για πελάτες στην Ε.Ε. Ε.Ε.: Όλα τα προϊόντα, στο τέλος της διάρκειας ζωής τους, ς πρέπει πρέ να επιστρέφονται στην Zebra για α ανακ ανακύκλωση. Για περισσότερες πληροφορίες σχετικά :ε την επιστροφή ε ενός προϊόντος, επισκεφθείτε τη διεύθυ ιεύθυνση www.zebra.com/weee στο ∆ιαδίκτυο. Malti: Għal klijenti fl-UE: il-prodo otti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, m, iridu jiġu rritornati għand Zebra għar-riċiklaġġ. Għal ħal aktar tagħrif dwar kif għandek tirritorna l-prodott, jekk jog għġbok żur: www.zebra.com/weee. UE: Toate produsele, la sfârşitul duratei lor de func?ionare,, trebuie returnate la Românesc: Pentru clien?ii din UE Zebra pentru reciclare. Pentru inf informa?ii despre returnarea produsului, accesa?i: www.zebr bra.com/weee. Slovenski: Za kupce v EU: vsii iz izdelki se morajo po poteku življenjske dobe vrniti podjetju Zebra za reciklažo. Za informacije o vračilu izdelka o obiščite: www.zebra.com/weee. Slovenčina: Pre zákazníkov z kr krajín EU: Všetky výrobky musia byť po uplynutí doby ich životnosti ži vrátené spoločnosti Zebra na recykláciu. u. Bližšie informácie o vrátení výrobkov nájdete na: www.zeb ebra.com/weee. Lietuvių: ES vartotojams: visi ga gaminiai, pasibaigus jų eksploatacijos laikui, turi būti grąžint nti utilizuoti į kompaniją „Zebra“. Daugiau informacijos, ka kaip grąžinti gaminį, rasite: www.zebra.com/weee. Zebra Technologies Corporation Zebra Confidential Restricted Page 7 of 8 ulatory Guide (RG) Rev. A Regu Latviešu: ES klientiem: visi prod odukti pēc to kalpošanas mūža beigām ir jānogādā atpakaļ Zebra otrreizējai pārstrādei. Lai iegūtu informāciju iju par produktu nogādāšanu Zebra, lūdzu, skatiet: www.zeb bra.com/weee. Türkçe: AB Müşterileri için: Kulla llanım süresi dolan tüm ürünler geri dönüştürme için Zebra'y 'ya iade edilmelidir. Ürünlerin nasıl iade edileceği hak akkında bilgi için lütfen şu adresi ziyaret edin: www.zebra.co .com/weee. Korea Warning Statement for Class B IT ITE 기종별 B급 기기 방송통신기자재) (가정용 방송통신기자재 사용자안내문 이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사용하는 것을 목적으로 하며, 하며 모든 지역에서 사용할 수 있습니다. South Korea For a radio equipment using 2400~2483.5 .5MHz or 5725~5825MHz, the following two expression sho hould be displayed; 무선설비는 운용 중 전파혼신 가능성이 있음 해당 무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니다 해당 Taiwan 臺灣 低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機，非經許可 非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功 加大功率或變更原設計之特性及功 能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使 並改善至無干擾時方得繼續使 用。 前項合法通信，指依電信規定作業之無線電通信 指依電信規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾 科學及醫療用電波輻射性電機設備之干擾。 無線接入點 (專業安裝) • • 本公司於說明書中提供所 提供所有必要資訊以指導使用者/安裝者正確的安裝 確的安裝及操作」警語。 並於該中文使用說明書及 明書及器材上標示 本器材須經專業工程人員 程人員安裝及設定，始得設置使用，且不得直接販 直接販售給一般消費者」 警語。 電磁波曝露量MPE標準值1mW/c /cm²；本產品使用時建議應距離人體 35 cm Zebra Technologies Corporation Zebra Confidential Restricted Page 8 of 8
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : KMV368 Create Date : 2016:02:23 14:34:57-08:00 Modify Date : 2016:02:24 10:20:38+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : GPL Ghostscript 8.71 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2016:02:24 10:20:38+08:00 Document ID : 2a5cce6c-dcd9-11e5-0000-a95ed197ff44 Instance ID : uuid:f2bb1eec-119d-4e8a-8e8e-c6e8b7026e0c Format : application/pdf Title : Microsoft Word - Regulatory_Guide_Radio module_CDRDB_2-23-16 Creator : KMV368 Page Count : 8EXIF Metadata provided by EXIF.tools