Zebra Technologies DS2278 Cordless 1D/2D Handheld Imager User Manual

Zebra Technologies Corporation Cordless 1D/2D Handheld Imager

User Manual

OPOS (IBM HAND-HELD with FULL DISABLE)ICL RS-232NIXDORF RS-232 MODE A*STANDARD RS-232 NIXDORF RS-232 MODE BFUJITSU RS-232OPOS/JPOSIBM PC/AT and IBM PC COMPATIBLE*IBM AT NOTEBOOKNON-IBM SCANNER EMULATION (PORT 5B) TABLE-TOP SCANNER EMULATION (PORT 17)HAND-HELD SCANNER EMULATION (PORT 9B)IBM HAND-HELD USBSYMBOL NATIVE API (SNAPI) WITH IMAGINGSTEP 1 - CONNECT HOST INTERFACEDIGITAL SCANNER FEATURES See Product Reference Guidefor detailed informationNOTE: Cables may vary depending on configurationSTEP 2 - SET UP INTERFACE (Scan Host Bar Codes)1 Scan Window2 3 USBKEYBOARD WEDGEUSB Scan ONE of the bar codes belowKeyboard Wedge Scan a bar code below*USB KEYBOARD (HID)IBM 46XXIBM 46XX Scan ONE of the bar codes below The Auto-Host Detect Cable feature automatically detects the host interface type, but there is no default setting. Scan one of the bar codes below to select the appropriate port.The interface cable automatically detects the host interface type and uses thedefault setting. If the default (*) does not meet your requirements, scan anotherhost bar code below. The interface cable automatically detects the host interface type and uses the default setting. If the default (*) does not meet your requirements, scan another host bar code below.The Auto-Host Detect Cable feature automatically detects the host interface type and uses the default setting. If the default (*) does not meet your requirements, scan the IBM PC/AT and IBM PC COMPATIBLE bar code below.USB - OVERRIDE CAPS LOCK KEY (ENABLE)*USB - DO NOT OVERRIDE CAPS LOCK KEY (DISABLE)RS-232RS-232 Scan ONE of the bar codes belowhttp://www.zebra.com/DS2278USB CAPS LOCK OVERRIDE BAR CODE ADD A TAB KEY To add a Tab key after scanned data, scan the bar code below. ADD A TAB KEYRETURN TO FACTORY DEFAULTSUSEFUL BAR CODESADD AN ENTER KEYTo add an Enter key after scanned data, scanthe bar code below.(Carriage Return/Line Feed)ADD AN ENTER KEY (CARRIAGE RETURN/LINE FEED)DS2278 DIGITAL SCANNERQuick Start GuideDigital ScannerPOST IN WORK AREAPOST IN WORK AREA123Scan4 Beeper ABOUT 123Scan123Scan is an easy-to-use, PC-based software tool that enables rapid and easy customized setup of a scanner via a bar code or USB cable.For more information, visit: http://www.zebra.com/123Scan.UTILITY FUNCTIONALITY- Device configuration - Electronic programming (USB cable) - Programming bar code(s)- Data view – scan log (display scanned bar code data)- Access asset tracking information- Upgrade firmware and view release notes- Remote management (SMS package generation)Note: Standard range digital scanner pictured.Scan LEDsScan TriggerFACTORY DEFAULTSAiming012345012345Note: For best performance, it is recommended to use Zebra accessories.CRADLE CABLE CONNECTION Host PortCRADLE INSERTION2134BATTERY REMOVAL1Unscrew Remove BatteryNote: It is recommended to fully charge the battery before use.2BATTERY INSERTION 1ReplaceBatteryPush Down2Screw toTighten3CHARGE ONLY MICRO USB CONNECTION CMYCMMYCYCMYKMN-002916-01a_ds2278front-qsg-en_print.pdf 1 4/17/2017 10:18:36 AM
MN-002916-01 Revision A April 2017Zebra Technologies CorporationLincolnshire, IL U.S.A.http://www.zebra.com© 2017 ZIH Corp and/or its affiliates. All rights reserved.ZEBRA and the stylized Zebra head are trademarks of ZIH Corp,registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners.Health and Safety Recommendation Ergonomic RecommendationsCaution: In order to avoid or minimize the potential risk of ergonomic injuryfollow the recommendations below. Consult with your local Health & SafetyManager to ensure that you are adhering to your company's safety programsto prevent employee injury.• Reduce or eliminate repetitive motion• Maintain a natural position• Reduce or eliminate excessive force• Keep objects that are used frequently within easy reach• Perform tasks at correct heights• Reduce or eliminate vibration• Reduce or eliminate direct pressure• Provide adjustable workstations• Provide adequate clearance• Provide a suitable working environment• Improve work procedures.English: For EU Customers: All products at the end of their life must be returned to Zebra for recycling. For information on how to return product, please go to: http://www.zebra.com/weee.Bulgarish: За клиенти от ЕС: След края на полезния им живот всички продукти трябва да се връщат на Zebra за рециклиране. За информация относно връщането на продукти, моля отидете на адрес: http://www.zebra.com/weee.Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení jejich životnosti vrátit spoleènosti Zebra k recyklaci. Informace o zpùsobu vrácení produktu najdete na webové stránce: http://www.zebra.com/weee.Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, når de er udtjent. Læs oplysningerne om returnering af produkter på: http://www.zebra.com/ weee.Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum Recycling an Zebra zurückgesandt werden. Informationen zur Rücksendung von Produkten finden Sie unter http://www.zebra.com/weee.Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της διάρκειας ζωής τους, πρέπει να επιστρέφονται στην Zebra για ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την επιστροφή ενός προϊόντος, επισκεφθείτε τη διεύθυνση http://www.zebra.com/weee στο Διαδίκτυο.Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise eesmärgil Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun aadressi: http://www.zebra.com/weee.Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a Zebra al final de su ciclo de vida para que sean reciclados. Si desea más información sobre cómo devolver un producto, visite: http://www.zebra.com/weee.Français : Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent être retournés à Zebra pour recyclage. Pour de plus amples informations sur le retour de produits, consultez : http://www.zebra.com/weee.Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalità di restituzione, visitare il seguente sito Web: http://www.zebra.com /weee.Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir jānogādā atpakaļ Zebra otrreizējai pārstrādei. Lai iegūtu informāciju par produktu nogādāšanu Zebra, lūdzu, skatiet: http://www.zebra.com/weee.Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui, turi būti grąžinti utilizuoti į kompaniją „Zebra“. Daugiau informacijos, kaip grąžinti gaminį, rasite: http://www.zebra.com/weee.Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Zebra vállalathoz kell eljuttatni újrahasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos tudnivalókért látogasson el a http://www.zebra.com/weee weboldalra.Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu rritornati għand Zebra għar-riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna l-prodott, jekk jogħġbok żur: http://www.zebra.com/weee.Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Zebra te worden teruggezonden voor recycling. Raadpleeg http://www.zebra.com/weee voor meer informatie over het terugzenden van producten.Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji nale¿y zwróciæ do firmy Zebra w celu ich utylizacji. Informacje na temat zwrotu produktów znajduj¹ siê na stronie internetowej http://www.zebra.com/weee.Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à Zebra para reciclagem. Para obter informações sobre como devolver o produto, visite: http://www.zebra.com/weee.Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei lor de funcţionare, trebuie returnate la Zebra pentru reciclare. Pentru informaţii despre returnarea produsului, accesaţi: http://www.zebra.com/weee.Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť po uplynutí doby ich životnosti vrátené spoločnosti Zebra na recykláciu. Bližšie informácie o vrátení výrobkov nájdete na: http://www.zebra.com/weee.Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju Zebra za reciklažo. Za informacije o vraèilu izdelka obišèite: http://www.zebra.com/weee.Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi Zebra-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa http://www.zebra.com/weee.Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till Zebra för återvinning. Information om hur du returnerar produkten finns på http://www.zebra.com/weee.Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri dönüştürme için Zebra'ya iade edilmelidir. Ürünlerin nasıl iade edileceği hakkında bilgi için lütfen şu adresi ziyaret edin: http://www.zebra.com/weee.CMM DisclosureWaste Electrical and Electronic Equipment (WEEE)© 2017 Zebra Technologies, Inc.Zebra reserves the right to make changes to any product to improve reliability, function, or design.Zebra does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Zebra products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Zebra products.Service InformationIf you have a problem using the equipment, contact your facility’s Technical or Systems Support. If there is a problem with the equipment, they will contact the Zebra Global Customer Support Center at:http://www.zebra.com/support. For the latest version of this guide go to: http://www.zebra.com/support.TURKISH WEEE Statement of ComplianceEEE Yönetmeliğine UygundurKorea Warning Statement for Class B ITEJapan (VCCI) - Voluntary Control Council for InterferenceClass B ITEMarking and European Economic Area (EEA)Regulatory InformationThis guide applies to Model Number: DS2278. All Zebra devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Local language translations are available at the following website: http://www.zebra.com/support.Any changes or modifications to Zebra equipment, not expressly approved by Zebra, could void the user’s authority to operate the equipment. Radio Frequency Interference Requirements -FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna• Increase the separation between the equipment and receiver• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected• Con sult the dealer or an experienced radio/TV technician for help.LED Devices For LED devices which have been evaluated to IEC 62471 and comply with the Exempt Risk Group,no product labeling requirements apply. However, the following statement is required to comply with US and international regulations:LED Compliance Statement:Classified as ‘EXEMPT RISK GROUP’ according to IEC 62471:2006 and EN 62471:2008.Pulse duration: 9 ms. Statement of ComplianceUkraineWarrantyFor the complete Zebra hardware product warranty statement, go to: http://www.zebra.com/warranty.For Australia Only. This warranty is given by Zebra Technologies Asia Pacific Pte. Ltd., 71 Robinson Road, #05-02/03, Singapore 068895, Singapore. Our goods come with guarantees that cannot be excluded under the Australia Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.Zebra Technologies Corporation Australia’s limited warranty above is in addition to any rights and remedies you may have under the Australian Consumer Law. If you have any queries, please call Zebra Technologies Corporation at+65 6858 0722. You may also visit our website: http://www.zebra.com for the most updated warranty terms. ChinaChileThis device is approved under Zebra Technologies Corporation. Radio TransmittersThis device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radio électrique subi même si le brouillage est susceptible d'en compromettre le fonctionnement. Radio Frequency Interference Requirements - CanadaCAN ICES-3 (B)/NMB-3(B)Radio Transmitters (Part 15)This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.Bluetooth® Wireless Technology for use through the EEA has the following restrictions:• Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400-2.4835 GHz.臺灣低功率電波輻射性電機管理辦法第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信規定作業之 無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。TaiwanFor a radio equipment using 2400~2483.5MHz or 5725~5825MHz, the following expression shouldbe displayed:당해 무선설비는 운용 중 전파혼신 가능성이 있음당해 무선설비 는전파혼 신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니다.S. KoreaThailandBrazil (UNWANTED EMISSIONS - ALL PRODUCTS)Caution:Only use Zebra approved and UL listed accessories, battery packs, and battery chargers. Do NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry before connecting to an external power source. Declared maximum operating temperature: 50ºC Bluetooth® Wireless TechnologyThis is an approved Bluetooth® product. For more information or to view the End Product Listing, visit https://www.bluetooth.org/tpg/listings.cfm.Wireless Device Country ApprovalsNote: this section is only applicable to WW/WR/EU configurations.Regulatory markings, subject to certification, are applied to the device signifying the radio(s) is/are approvedfor use in the following countries: United States, Canada, Japan, China, South Korea, Australia, and Europe. Please refer to the Declaration of Conformity (DoC) for details of other country markings. This is available athttp://www.zebra.com/doc.Note: Europe includes, Austria, Belgium, Bulgaria, Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands,Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.Caution: Please observe all warning notices with regard to the usage of wireless devices. Caution: Operation of the device without regulatory approval is illegal. Warnings for Use of Wireless Devices Safety in Hospitals Wireless devices transmit radio frequency energy and may affect medical electrical equipment.PacemakersPersons with Pacemakers:Other Medical DevicesWireless devices should be switched off wherever you are requested to do so in hospitals, clinics or health care facilities. These requests are designed to prevent possible interference with sensitive medical equipmet.Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device.Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research.To satisfy US and Canadian RF exposure requirements, a transmitting device must operate with a minimum separation distance of 0 cm or more from a person’s body. Zebra hereby declares that this radio equipment is in compliance with Directive 2011/65/EU and 1999/5/ECor 2014/53/EU (2014/53/EU supersedes 1999/5/EC from 13th June 2017). The full text of the EU Declarationof Conformity is available at the following internet address: http://www.zebra.com/doc.(Parts) (Pb) (Hg) (Cd) (PBB) (PBDE)(Metal Parts)(Circuit Modules)(Cables and Cable Assemblies)(Plastic and Polymeric Parts)(Optics and Optical Components)(Batteries)O O O O OO O O OO O O OO O O O OOOO O O O OOO O O O OO O有害物质(Cr (VI))本表格依据SJ/T 11364 的规定编制。O: 表示该有害物质在该部件所有均质材料中的含量均在 SJ/T 11364--2014 规定的限量要求以下。X: 表示该有害物质至少在该部件的某一均质材料中的含量超出SJ/T 11364--2014 规定的限量要求。(企业可在此处，根据实际情况对上表中打“×”的技术原因进行进一步说明。）25XXXThis table was created to comply with China RoHS requirements.Tested to complywith FCC StandardsFOR HOME OR OFFICE USEOther CountriesEste equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria de telecomunicaciones,relativa a radiaciones electromagnéticas. 通过访问以下网址可下载当地语言支持的产品说明书 www.zebra.com/support 锂电池安全警示语: 警告：请勿拆装，短路，撞击，挤压或者投入火中及水中； 注意：如果电池被不正确型号替换，或出现鼓胀，会存在爆炸及其他危险 请按说明处置使用过的电池 电池浸水后严禁使用 合格证： MexicoRestrict Frequency Range to: 2.450 – 2.4835 GHz.La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.Дане обладнання відповідає вимогам технічного регламенту №1057, № 2008 на обмеження щодо використання деяких небезпечних речовин в електричних та електронних пристроях. เครื่องโทรคมนาคมและอุปกรณ์นี้ มีความสอดคล้องตามข้อกำหนดของ กทช.Eurasian Customs UnionЕвразийский Таможенный СоюзДанный продукт соответствует требованиям знака EAC.Hrvatski: Za kupce u Europskoj uniji: Svi se proizvodi po isteku vijeka trajanja moraju vratiti tvrtki Zebrana recikliranje. Informacije o načinu vraćanja proizvoda potražite na web-stranici:http://www.zebra.com/weeeRF Exposure GuidelinesSafety Information• Reducing RF Exposure – Use ProperlyOnly operate the device in accordance with the instructions supplied.• International• Europe - Handheld Devices • US and CanadaThe device complies with internationally recognized standards covering human exposure to electromagneticfields from radio devices. For information on “International” human exposure to eletromagnetic fields refer tothe Zebra Declaration of Conformity (DoC) at http://www.zebra.com/doc.To comply with EU RF exposure requirements, this device must be operated in the hand with a minimumseparation distance of 0 cm or more from a person’s body. Other operating configurations should be avoided.To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located or operating in conjunction with any other transmitter/antenna except those already approved in this filling.For further information on the safety of RF energy from wireless devices, seehttps://www.zebra.com/us/en/about-zebra/company-information/corporate-responsibility.html, which is located under Corporate Responsibility. • Co-located StatementThis device was tested for typical body worn or handheld operation. Use only Zebra tested and approved belt-clips, holsters, and similar accessories to ensure FCC Compliance. The use of third-party belt clips, holsters, and similar accessories may not comply with FCC RF exposure compliance requirements, and should be avoided.• Handheld DevicesPour satisfaire aux exigences Américaines et Canadiennes d'exposition aux radio fréquences, un dispositif de transmission doit fonctionner avec une distance de séparation minimale de 0 cm ou plus de corps d'une personne. SCANNINGAvoid Extreme Wrist Angles Avoid ReachingAvoid BendingRECOMMENDED USAGE GUIDE - OPTIMUM BODY POSTUREPOST IN WORK AREABEEPER INDICATIONS SCANNER LED INDICATIONS Local Contact:Indication Beeper SequencePower up Low/medium/high beepsMedium beepBar code decoded4 long low beepsTransmission error detected; data is ignoredHigh/low/high/low beepsSuccessful parameter settingCorrect programming sequence performed High/low beepsLong low/long high beepsIncorrect programming sequence, or Cancel bar code scannedHand-Held ScanningHands-Free (Presentation) ScanningIndication LED IndicatorOffDigital scanner is on and ready to scan, or no power to scannerGreen flashBar code is successfully decodedRedTransmission errorOffGreenOff momentarilyRedNo power to scannerDigital scanner is ready to scanBar code is successfully decodedTransmission errorTROUBLESHOOTINGDigital scanner not workingNo power to scannerInterface cable is looseHost interface not configured properlyDigital scanner is disabledCheck system power; ensure battery is charged.Invalid ADF Rule Program the correct ADF rules.Ensure that correct host interface cable is used.Digital scanner decoding bar code, but data not transmitting to hostScan appropriate host parameter bar codes. Ensure all cable connections are secure.Digital scanner not decoding bar codeDigital scanner not programmed for bar code typeHost interface not configured properlyDistance between scanner and bar code incorrectBar code unreadableEnsure scanner is programmed to readtype of bar code being scanned.Ensure bar code is not defaced; try scanning test bar code of same bar code type.Scanned data incorrectly displayed on hostMove scanner closer to, or further from bar code. Scan appropriate host parameter bar codes.Region improperly configured Select appropriate country and language encoding scheme.REGULATORY INFORMATION DS2278 DIGITAL SCANNERRegulatory declarations for DS2278 - BRAZIL NOTA: A marca de certificação se aplica ao Equip. de Radiação Restrita, modelo DS2278. Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.” Para maiores consultas sobre ANATEL consulte o site: www.anatel.gov.br.For more information consult the website www.anatel.gov.br Batteries Taiwan - RecyclingBattery InformationBattery Safety GuidelinesUse only Zebra approved batteries. Accessories which have battery charging capability are approved for usewith the following battery models: Part Number BT-000317-01 (4.2 Vdc, 2400 mAh).EPA (Environmental Protection Administration) requires dry battery producing or importing firms in accordance with Article 15 of the Waste Disposal Act are required to indicate the recycling marks on the batteries used in sales, giveaway or promotion. Contact a qualified Taiwanese recycler for proper battery disposal.Zebra approved rechargeable battery packs are designed and constructed to the highest standards withinthe industry.However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmentalconditions and severe drops. When batteries are stored over six months, some irreversible deterioration in overall battery quality may occur. Store batteries at half of full charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half of full charge.Replace the battery when a significant loss of run time is detected.Standard warranty period for all Zebra batteries is one year, regardless if the battery was purchased separately or included as part of the mobile computer or bar code scanner. For more information on Zebra batteries, please visit: http://www.zebra.com/batterybasics. The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particularcare should be taken where the device is charged in a non commercial environment.• Follow battery usage, storage, and charging guidelines found in the user's guide.• Improper battery use may result in a fire, explosion, or other hazard.• To charge the mobile device battery, the battery and charger temperatures must be between +32ºF and +104ºF (0ºC and +40ºC). • Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Zebra support.• For devices that utilize a USB port as a charging source, the device shall only be connected to products thatbear the USB-IF logo or have completed the USB-IF compliance program.• Do not disassemble or open, crush, bend or deform, puncture, or shred.• Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat.• Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals.• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to wateror other liquids, or expose to fire, explosion, or other hazard.• Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicleor near a radiator or other heat source. Do not place battery into a microwave oven or dryer.• Battery usage by children should be supervised.• Please follow local regulations to promptly dispose of used re-chargeable batteries.• Do not dispose of batteries in fire.• Seek medical advice immediately if a battery has been swallowed.• In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice.• If you suspect damage to your equipment or battery, contact Zebra support to arrange for inspection.Caution: Risk of expolosion if battery is replaced by an incorrect type. Dispose of batteries according to instructions. Digital scanner not paired to cradle Scan cradle pairing bar code.Low battery indication (on trigger release) 4 short high beepsDS2278 DIGITAL SCANNERCradle Indication Cradle LED IndicatorStandard UsePower up Green (stays on)Radio IndicationsGreen (off, then on)Bluetooth connection establishedBattery IndicationsAmber blinkingChargingFully chargedCharging errorGreen (solid)Amber fast blinkingCharging with Micro USB ConnectionDigital scanner is chargingDigital scanner is fully chargedCharge errorGreen flash (fast continuous)Green (solid)Red (solid)AVOID REACHINGAVOID BENDINGAVOID EXTREMEWRIST ANGLESCMYCMMYCYCMYKMN-002916-01a_ds2278back-qsg-en.pdf 1 4/17/2017 10:16:41 AM

Navigation menu