Zebra Technologies DS8178 Digital Scanner User Manual DS8178 Digital Scanner en
Zebra Technologies Corporation Digital Scanner DS8178 Digital Scanner en
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3142185 |
| Application ID | OSWI6ctlU9oW3Pb+h7QhVQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 227.48kB (2843459 bits) |
| Date Submitted | 2016-09-21 00:00:00 |
| Date Available | 2017-03-21 00:00:00 |
| Creation Date | 2017-12-15 00:05:03 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-12-15 00:05:03 |
| Document Title | DS8178 Digital Scanner (en) |
| Document Creator | Adobe Illustrator CC 2015 (Windows) |
| Document Author: | Zebra Technologies Corporation |
DS8178 DIGITAL SCANNER DIGITAL SCANNER FEATURES http://www.zebra.com/DS8178 CRADLE INSERTION Note: Standard range digital scanner pictured. BATTERY INSERTION/REMOVAL Note: It is recommended to fully charge the battery before use. POST IN WORK AREA Digital Scanner Quick Start Guide Unlock 1 Scan Window 2 Battery LED 3 Scan LEDs 4 Beeper 5 Scan Trigger Lock See Product Reference Guide for detailed information CRADLE CABLE CONNECTION SET DEFAULTS / ENTER KEY BAR CODES TAB KEY BAR CODE ADD A TAB KEY Host Port Host Port RETURN TO FACTORY DEFAULTS To add a Tab key after scanned data, scan the bar code below. ADD AN ENTER KEY (Carriage Return/Line Feed) To add an Enter key after scanned data, scan the bar code below. ADD A TAB KEY ADD AN ENTER KEY (CARRIAGE RETURN/LINE FEED) NIGHT MODE WITH VIBRATE USB CAPS LOCK OVERRIDE BAR CODE Note: Healthcare configurations only. ENABLE NIGHT MODE TRIGGER USB - OVERRIDE CAPS LOCK KEY (ENABLE) DISABLE NIGHT MODE TRIGGER *USB - DO NOT OVERRIDE CAPS LOCK KEY (DISABLE) TOGGLE NIGHT MODE STEP 1 - CONNECT HOST INTERFACE USB STEP 2 - SET UP INTERFACE (Scan Host Bar Codes) USB Scan ONE of the bar codes below The interface cable automatically detects the host interface type and uses the default setting. If the default (*) does not meet your requirements, scan another host bar code below. IBM HAND-HELD USB *USB KEYBOARD (HID) IBM OPOS (IBM HAND-HELD USB with FULL SCAN DISABLE) NOTE: Cables may vary depending on configuration RS-232 SNAPI WITH IMAGING RS-232 Scan ONE of the bar codes below The interface cable automatically detects the host interface type and uses the default setting. If the default (*) does not meet your requirements, scan another host bar code below. *STANDARD RS-232 NIXDORF RS-232 MODE B ICL RS-232 NIXDORF RS-232 MODE A KEYBOARD WEDGE FUJITSU RS-232 OPOS/JPOS Keyboard Wedge Scan a bar code below The Auto-Host Detect Cable feature automatically detects the host interface type and uses the default setting. If the default (*) does not meet your requirements, scan the IBM PC/AT and IBM PC COMPATIBLE bar code below. *IBM AT NOTEBOOK IBM 46XX IBM PC/AT and IBM PC COMPATIBLE IBM 46XX Scan ONE of the bar codes below The Auto-Host Detect Cable feature automatically detects the host interface type, but there is no default setting. Scan one of the bar codes below to select the appropriate port. NON-IBM SCANNER EMULATION (PORT 5B) TABLE-TOP SCANNER EMULATION (PORT 17) HAND-HELD SCANNER EMULATION (PORT 9B) 123Scan ABOUT 123Scan 123Scan is an easy-to-use, PC-based software tool that enables rapid and easy customized setup of a scanner via a bar code or USB cable. For more information, visit: http://www.zebra.com/123Scan. UTILITY FUNCTIONALITY - Device configuration - Electronic programming (USB cable) - Programming bar code(s) - Data view – scan log (display scanned bar code data) - Access asset tracking information - Upgrade firmware and view release notes - Remote management (SMS package generation) DS8178 DIGITAL SCANNER SCANNING POST IN WORK AREA Aiming 012345 012345 RECOMMENDED USAGE GUIDE - OPTIMUM BODY POSTURE Avoid Extreme Wrist Angles Avoid Bending Avoid Reaching Health and Safety Recommendation Ergonomic Recommendations AVOID BENDING AVOID REACHING AVOID EXTREME WRIST ANGLES BEEPER INDICATIONS 1999/5/EC and 2011/65/EU Indication Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your company's safety programs to prevent employee injury. • Reduce or eliminate repetitive motion • Maintain a natural position • Reduce or eliminate excessive force • Reduce or eliminate vibration • Perform tasks at correct heights • Keep objects that are used frequently within easy reach • Reduce or eliminate direct pressure • Provide adjustable workstations • Provide adequate clearance • Provide a suitable working environment • Improve work procedures. LED INDICATIONS Hand-Held Scanning Indication Beeper Sequence LED Indicator Power up Low/medium/high beeps Bar code decoded Medium beep Digital scanner is on and ready to scan, or no power to scanner Off Transmission error detected; data is ignored 4 long low beeps Bar code is successfully decoded Green flash Successful parameter setting High/low/high/low beeps High/low beeps Transmission error Red Correct programming sequence performed Incorrect programming sequence, or Cancel bar code scanned Long low/long high beeps Low battery indication (on trigger release) 4 short high beeps Hands-Free (Presentation) Scanning Battery Indications Battery LED status 51-100% Green, 21-50% Amber, 0-20% Red Battery end of life 51-100% Green/red alternating 21-50% Amber/red alternating 0-20% Red blinking Paging state Blue (fast, fast slow) No power to scanner Off Digital scanner is ready to scan Green Bar code is successfully decoded Off Momentarily Transmission error Red Local Contact: TROUBLESHOOTING Digital scanner not working Digital scanner not decoding bar code No power to scanner Check system power; ensure battery is charged. Digital scanner is disabled Ensure that correct host interface cable is used. Digital scanner not programmed for bar code type Bar code unreadable Digital scanner decoding bar code, but data not transmitting to host Host interface not configured properly Scan appropriate host parameter bar codes. Interface cable is loose Ensure all cable connections are secure. Invalid ADF Rule Program the correct ADF rules. Digital scanner not paired to cradle Scan cradle pairing bar code. Distance between scanner and bar code incorrect Ensure scanner is programmed to read type of bar code being scanned. Ensure bar code is not defaced; try scanning test bar code of same bar code type. Move scanner closer to, or further from bar code. Scanned data incorrectly displayed on host Host interface not configured properly Scan appropriate host parameter bar codes. Region improperly configured Select appropriate country and language encoding scheme. REGULATORY INFORMATION © 2016 Zebra Technologies, Inc. Regulatory Information Zebra reserves the right to make changes to any product to improve reliability, function, or design. Zebra does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Zebra products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Zebra products. This device is approved under Zebra Technologies Corporation. Warranty Local language translations are available at the following website: http://www.zebra.com/support. For the complete Zebra hardware product warranty statement, go to: http://www.zebra.com/warranty. Any changes or modifications to Zebra equipment, not expressly approved by Zebra, could void the user’s authority to operate the equipment. For Australia Only. This warranty is given by Zebra Technologies Asia Pacific Pte. Ltd., 71 Robinson Road, #05-02/03, Singapore 068895, Singapore. Our goods come with guarantees that cannot be excluded under the Australia Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Zebra Technologies Corporation Australia’s limited warranty above is in addition to any rights and remedies you may have under the Australian Consumer Law. If you have any queries, please call Zebra Technologies Corporation at+65 6858 0722. You may also visit our website: http://www.zebra.com for the most updated warranty terms. Service Information If you have a problem using the equipment, contact your facility’s Technical or Systems Support. If there is a problem with the equipment, they will contact the Zebra Global Customer Support Center at: http://www.zebra.com/support. For the latest version of this guide go to: http://www.zebra.com/support. Waste Electrical and Electronic Equipment (WEEE) English: For EU Customers: All products at the end of their life must be returned to Zebra for recycling. For information on how to return product, please go to: http://www.zebra.com/weee. Bulgarish: За клиенти от ЕС: След края на полезния им живот всички продукти трябва да се връщат на Zebra за рециклиране. За информация относно връщането на продукти, моля отидете на адрес: http://www.zebra.com/weee. Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení jejich životnosti vrátit spoleènosti Zebra k recyklaci. Informace o zpùsobu vrácení produktu najdete na webové stránce: http://www.zebra.com/weee. Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, når de er udtjent. Læs oplysningerne om returnering af produkter på: http://www.zebra.com/ weee. Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum Recycling an Zebra zurückgesandt werden. Informationen zur Rücksendung von Produkten finden Sie unter http://www.zebra.com/weee. Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της διάρκειας ζωής τους, πρέπει να επιστρέφονται στην Zebra για ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την επιστροφή ενός προϊόντος, επισκεφθείτε τη διεύθυνση http://www.zebra.com/weee στο Διαδίκτυο. Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise eesmärgil Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun aadressi: http://www.zebra.com/weee. Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a Zebra al final de su ciclo de vida para que sean reciclados. Si desea más información sobre cómo devolver un producto, visite: http://www.zebra.com/weee. Français : Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent être retournés à Zebra pour recyclage. Pour de plus amples informations sur le retour de produits, consultez : http://www.zebra.com/weee. Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalità di restituzione, visitare il seguente sito Web: http://www.zebra.com /weee. Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir jānogādā atpakaļ Zebra otrreizējai pārstrādei. Lai iegūtu informāciju par produktu nogādāšanu Zebra, lūdzu, skatiet: http://www.zebra.com/weee. Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui, turi būti grąžinti utilizuoti į kompaniją „Zebra“. Daugiau informacijos, kaip grąžinti gaminį, rasite: http://www.zebra.com/weee. Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Zebra vállalathoz kell eljuttatni újrahasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos tudnivalókért látogasson el a http://www.zebra.com/weee weboldalra. Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu rritornati għand Zebra għar-riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna l-prodott, jekk jogħġbok żur: http://www.zebra.com/weee. Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Zebra te worden teruggezonden voor recycling. Raadpleeg http://www.zebra.com/weee voor meer informatie over het terugzenden van producten. Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji nale¿y zwróciæ do firmy Zebra w celu ich utylizacji. Informacje na temat zwrotu produktów znajduj¹ siê na stronie internetowej http://www.zebra.com/weee. Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à Zebra para reciclagem. Para obter informações sobre como devolver o produto, visite: http://www.zebra.com/weee. Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei lor de funcţionare, trebuie returnate la Zebra pentru reciclare. Pentru informaţii despre returnarea produsului, accesaţi: http://www.zebra.com/weee. Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť po uplynutí doby ich životnosti vrátené spoločnosti Zebra na recykláciu. Bližšie informácie o vrátení výrobkov nájdete na: http://www.zebra.com/weee. Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju Zebra za reciklažo. Za informacije o vraèilu izdelka obišèite: http://www.zebra.com/weee. Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi Zebra-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa http://www.zebra.com/weee. Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till Zebra för återvinning. Information om hur du returnerar produkten finns på http://www.zebra.com/weee. Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri dönüştürme için Zebra'ya iade edilmelidir. Ürünlerin nasıl iade edileceği hakkında bilgi için lütfen şu adresi ziyaret edin: http://www.zebra.com/weee. TURKISH WEEE Statement of Compliance EEE Yönetmeli ğine Uygundur China RoHS This table was created to comply with China RoHS requirements. 有害物质 部件名称 (Parts) For devices with Symbol, or Symbol Technologies Inc., etc. on Manufacturing Label and for devices manufactured at Reynosa, or any other Zebra factory facilities: This guide applies to Model Number: DS8178. All Zebra devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Caution: Only use Zebra approved and UL listed accessories, battery packs, and battery chargers. Do NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry before connecting to an external power source. Declared maximum operating temperature: 50ºC Bluetooth® Wireless Technology This is an approved Bluetooth® product. For more information or to view the End Product Listing, visit https://www.bluetooth.org/tpg/listings.cfm. Wireless Device Country Approvals Note: this section is only applicable to WW/WR/EU configurations. Regulatory markings, subject to certification, are applied to the device signifying the radio(s) is/are approved for use in the following countries: United States, Canada, Japan, China, South Korea, Australia, and Europe. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radio Frequency Interference Requirements - Canada CAN ICES-3 (B)/NMB-3(B) Radio Transmitters Warnings for Use of Wireless Devices Caution: Please observe all warning notices with regard to the usage of wireless devices. Safety in Hospitals Wireless devices transmit radio frequency energy and may affect medical electrical equipment. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or health care facilities. These requests are designed to prevent possible interference with sensitive medical equipmet. Pacemakers Marking and European Economic Area (EEA) Bluetooth® Wireless Technology for use through the EEA has the following restrictions: • Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400-2.4835 GHz. Statement of Compliance Zebra hereby declares that this device is in compliance with all the essential requirements and other relevant provisions of Directive 1999/5/EC and 2011/65/EU. A Declaration of Conformity may be obtained from http://www.zebra.com/doc. Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Other Countries Persons with Pacemakers: Class B ITE • Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON. • Should not carry the device in a breast pocket. • Should use the ear furthest from the pacemaker to minimize the potential for interference • If you have any reason to suspect that interference is taking place, turn OFF your device. Japan (VCCI) - Voluntary Control Council for Interference Other Medical Devices Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device. Korea Warning Statement for Class B ITE RF Exposure Guidelines Safety Information • Reducing RF Exposure – Use Properly Only operate the device in accordance with the instructions supplied. • International The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on “International” human exposure to eletromagnetic fields refer to the Zebra Declaration of Conformity (DoC) at http://www.zebra.com/doc. For further information on the safety of RF energy from wireless devices, see http://responsibility.zebra.com/index.php/downloads/, which is located under Wireless Communications and Health. • Europe - Handheld Devices To comply with EU RF exposure requirements, this device must be operated in the hand with a minimum separation distance of 0 cm or more from a person’s body. Other operating configurations should be avoided. • US and Canada • Co-located Statement To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located or operating in conjunction with any other transmitter/antenna except those already approve in this filling. • Handheld Devices This device was tested for typical body worn or handheld operation. Use only Zebra tested and approved belt-clips, holsters, and similar accessories to ensure FCC Compliance. The use of third-party belt clips, holsters, and similar accessories may not comply with FCC RF exposure compliance requirements, and should be avoided. Caution: To satisfy US and Canadian RF exposure requirements, a transmitting device must operate with a minimum separation distance of 0 cm or more from a person’s body. Pour satisfaire aux exigences Américaines et Canadiennes d'exposition aux radio fréquences, un dispositif de transmission doit fonctionner avec une distance de séparation minimale de 0 cm ou plus de corps d'une personne. LED Devices For LED devices which have been evaluated to IEC 62471 and comply with the Exempt Risk Group, no product labeling requirements apply. However, the following statement is required to comply with US and international regulations: LED Compliance Statement: Classified as ‘EXEMPT RISK GROUP’ according to IEC 62471:2006 and EN 62471:2008. Pulse duration: Continuous mS. Brazil (UNWANTED EMISSIONS - ALL PRODUCTS) Regulatory declarations for DS8178 - BRAZIL For more information consult the website www.anatel.gov.br NOTA: A marca de certificação se aplica ao Equip. de Radiação Restrita, modelo DS8178. Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.” Para maiores consultas sobre ANATEL consulte o site: www.anatel.gov.br. Chile Este equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria de telecomunicaciones, relativa a radiacion es electromagnéticas. China 通过访问以下网址可下载当地语言支持的产品说明书 http://www.motorolasolutions.com/CN-ZH/Pages/Contact_Us#support_tab Ukraine Дане обладнання відповідає вимогам технічного регламенту №1057, № 2008 на обмеження щодо використання деяких небезпечних речовин в електричних та електронних пристроях. Taiwan 臺灣 低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、 商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 Batteries 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時， 應立即停用，並改善至無干擾時方得繼續使用。 前項合法通信，指依電信規定作業之 無線電通信。 Taiwan - Recycling 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 S. Korea For a radio equipment using 2400~2483.5MHz or 5725~5825MHz, the following expression should be displayed: 铅 (Pb) 汞 (Hg) 镉 (Cd) (Cr (VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 金属部件 (Metal Parts) 电路模块 (Circuit Modules) 电缆及电缆组件 (Cables and Cable Assemblies) 塑料和聚合物部件 (Plastic and Polymeric Parts) 光学和光学组件 (Optics and Optical Components) Use only Zebra approved batteries. Accessories which have battery charging capability are approved for use 电池 (Batteries) Zebra approved rechargeable battery packs are designed and constructed to the highest standards within the industry. However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops. When batteries are stored over six months, some irreversible deterioration in overall battery quality may occur. Store batteries at half of full charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half of full charge. Replace the battery when a significant loss of run time is detected. Standard warranty period for all Zebra batteries is 30 days, regardless if the battery was purchased separately or included as part of the mobile computer or bar code scanner. For more information on Zebra batteries, please visit: http://www.zebra.com/batterybasics. EPA (Environmental Protection Administration) requires dry battery producing or importing firms in accordance with Article 15 of the Waste Disposal Act are required to indicate the recycling marks on the batteries used in sales, giveaway or promotion. Contact a qualified Taiwanese recycler for proper battery disposal. 당해 무선설비는 운용 중 전파혼신 가능성이 있음 당해 무선설비 는전파혼 신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니다. Thailand Battery Information Caution: Risk of expolosion if battery is replaced by an incorrect type. Dispose of batteries according to instructions. with the following battery models: Part Number 82-176890-01 (3.6 Vdc, 3200 mAh). This table was created to comply with China RoHS requirements. Radio Transmitters (Part 15) This device complies with industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference, including interference that may cause undesired operation Note: Europe includes, Austria, Belgium, Bulgaria, Czech Republic, Cyprus, Denmark, Estonia, Finland, France, of the device. Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Cet appareil est conforme exempts de licence le flux RSS de Industrie Canada. Son fonctionnement est Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. soumis aux deux conditions suivantes: (1) le dispositif ne peut causer des interferences; et (2) cet appareil doit accepter tout interference, y compris les interferences qui peuvent causer un mauvais Caution: Operation of the device without regulatory approval is illegal. fonctionnement de l’appareil. • O: 表示该有害物质在该部件所有均质材料中的含量均在 SJ/T 11364--2014 规定的限量 要求以下。 X: 表示该有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11364--2014 规定 的限量要求。(企业可在此处，根据实际情况对上表中打“×”的技术原因进 行进一步说明。） Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential FOR HOME OR OFFICE USE installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Con sult the dealer or an experienced radio/TV technician for help. Tested to comply with FCC Standards Please refer to the Declaration of Conformity (DoC) for details of other country markings. This is available at http://www.zebra.com/doc. 15 本表格依据SJ/T 11364 的规定编制。 Radio Frequency Interference Requirements -FCC Zebra Technologies Corporation Lincolnshire, IL U.S.A. http://www.zebra.com Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many juristictions worldwide. All other trademarks are the property of their respective owners. © 2016 Symbol Technologies Corporation, a subsidiary of Zebra Technologies Corporation. All rights reserved. MN-002753-01 Revision A July 2016 DS8178 DIGITAL SCANNER Battery Safety Guidelines The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non commercial environment. • Follow battery usage, storage, and charging guidelines found in the user's guide. • Improper battery use may result in a fire, explosion, or other hazard. • To charge the mobile device battery, the battery and charger temperatures must be between +32ºF and +104ºF (0ºC and +40ºC). • Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Zebra support. • For devices that utilize a USB port as a charging source, the device shall only be connected to products that bear the USB-IF logo or have completed the USB-IF compliance program. • Do not disassemble or open, crush, bend or deform, puncture, or shred. • Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat. • Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals. • Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard. • Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer. • Battery usage by children should be supervised. • Please follow local regulations to promptly dispose of used re-chargeable batteries. • Do not dispose of batteries in fire. • Seek medical advice immediately if a battery has been swallowed. • In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice. • If you suspect damage to your equipment or battery, contact Zebra support to arrange for inspection.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : Zebra Technologies Corporation Create Date : 2016:08:12 15:52:04-04:00 Modify Date : 2016:09:14 19:38:15+08:00 Subject : MN-002753-01 Rev. A XMP Toolkit : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29 Metadata Date : 2016:09:14 19:38:15+08:00 Creator Tool : Adobe Illustrator CC 2015 (Windows) Format : application/pdf Description : MN-002753-01 Rev. A Title : DS8178 Digital Scanner (en) Creator : Zebra Technologies Corporation Document ID : uuid:9610b1fb-31c0-4443-b78e-a3a04c0b36bd Instance ID : uuid:033815f8-7c0a-4651-954e-c8423e6c8bd9 Producer : Adobe PDF library 15.00 Page Count : 2 For : Geri Matzner (ZEBRA), Bounding Box : -361 -2100 981 196 Container Version : 11 Creator Version : 19EXIF Metadata provided by EXIF.tools