Zebra Technologies HS3100 Enhanced Bluetooth Headset User Manual

Zebra Technologies Corporation Enhanced Bluetooth Headset Users Manual

Users Manual

Rugged BluetoothHeadsetZebra reserves the right to make changes to any product to improve reliability, function, or design. Zebra does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Zebra products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Zebra products.WarrantyFor the complete Zebra hardware product warranty statement, go to:http://www.zebra.com/warranty.Service InformationBefore you use the unit, it must be configured to operate in your facility’s network and run your applications.If you have a problem running your unit or using your equipment, contact your facility’s Technical or Systems Support. If there is a problem with the equipment, they will contact the Zebra Global Customer Support at: http://www.zebra.com/support. For the latest version of this guide go to: http://www.zebra.com/support.Zebra Technologies Corporation, Lincolnshire, IL USAhttp://www.zebra.comZebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners.© 2016 Symbol Technologies LLC, a subsidiary of Zebra Technologies Corporation. All rights reserved.HS3100Quick Start GuideMN-002762-01 Revision A — July 2016OTH BTNFeaturesOver-the-Head (OTH)Behind-the-Neck (BTN)Note: This guide applies to both the OTH and BTN headband models, unless otherwise noted.Buttons/LEDCharge the BatteryInsert the battery into the charger with the contacts facing forward.Insert the BatteryInsert the battery with the contacts facing outward.Power On HeadsetPress the Main Function button to turn the power on. The headset LED illuminates blue and flashes three times.Pair Headset with DeviceThe headset can be paired in any of the following ways:• Tap to Pair (NFC Pairing)• Scan to Pair (Bar Code Pairing)• Manual Pairing (Provisioning the HS MAC Address)Position the BoomDo not rotate the boom beyond the stop point.* Applies to OTH model. The BTN model has only left side boom placement.Adjust the OTH HeadbandThe headband can be squeezed for a tighter fit to the head and clicks as it is positioned into place. When adjusting the headband,• Position the ear pad in the center of the ear.• Position the T-Bar above the ear, half way between the top of the ear and the top of the head.* Applies to OTH model.Adjust the BTN Headband StrapLoosen or tighten the velcro closure on each end to increase or decrease the length of the strap.Slide the clips forward or backward to move the strap closer or further from the headband.* Applies to BTN model.Adjust the MicrophonePosition the microphone icon so that it is facing your mouth.Adjust the Microphone BoomPlace the microphone two finger’s width away from the corner of your mouth, so it is slightly to one side.Mute the MicrophonePlace the microphone boom in the upright position.Adjust the VolumeAudio Tones and PromptsMaintenanceReplace T-Bar* Applies to OTH model.Replace Headband PadRemove the T-Bar and then the headband pad.Replace the headband pad and then the T-Bar.* Applies to OTH model.Replace HeadbandDisassemble the headset to replace the headband.Replace Ear PadFirmly grip and pull the ear pad and inner casing.Align and snap the new fear pad into position.Replace WindscreenRemove the BatteryButtons/Function LED IndicatorMain Function ButtonPower ON Blue and flashes three timesPower OFF Red and flashes three timesPair Blue and Red alternate flashConnection StatusAdjustable HeadbandMicrophone with WindscreenFlexible Microphone BoomT-BarSingle Ear PieceBatteryEar Piece AssemblyDisassembly KnobButtons/LEDMicrophone with WindscreenFlexible Microphone BoomDisassembly KnobBTN Headband with Adjustable StrapBatteryButtons/LEDLeft Placement Single Ear PieceNFC TagMain Function ButtonVolumeNot Connected BlueConnected Blue flash every two secondsBattery StatusLow Battery Shutdown Red and flashes three timesLow Battery Warning Red flashes twice every two seconds until battery shutdownBattery Charging (USB) RedMain Function ButtonNFC TagNFC Pairing Bar Code PairingLeft Side Boom PlacementRight Side Boom PlacementFunction Audio Tone/PromptsStart Pairing Tone: Two short beeps - lowSuccessful Pairing Tone: Three beeps - raisingDevice Connected Tone: One beepPrompt: From the applicationBluetooth Link Lost Tone: Two low tones followed by high toneLow Battery Tone: Two short beeps triggered every two minutes until shutdownPrompt: While connected from the applicationVolume UP/DOWN ButtonsLow Backup Power TimeTone: ??Prompt: ??Mute Tone: Two tones failingUn-mute Tone: Two tones raisingTo On Tone: Four rising tonesTo Low Power Tone: Four descending tones1234

Navigation menu