Zebra Technologies HS3100 Enhanced Bluetooth Headset User Manual
Zebra Technologies Corporation Enhanced Bluetooth Headset Users Manual
Users Manual
![](/img.php?id=3057530&img=bg1.png)
Rugged Bluetooth
Headset
Zebra reserves the right to make changes to any product to improve reliability,
function, or design. Zebra does not assume any product liability arising out of,
or in connection with, the application or use of any product, circuit, or
application described herein. No license is granted, either expressly or by
implication, estoppel, or otherwise under any patent right or patent, covering or
relating to any combination, system, apparatus, machine, material, method,
or process in which Zebra products might be used. An implied license exists
only for equipment, circuits, and subsystems contained in Zebra products.
Warranty
For the complete Zebra hardware product warranty statement, go to:
http://www.zebra.com/warranty.
Service Information
Before you use the unit, it must be configured to operate in your facility’s
network and run your applications.
If you have a problem running your unit or using your equipment, contact your
facility’s Technical or Systems Support. If there is a problem with the
equipment, they will contact the Zebra Global Customer Support at:
http://www.zebra.com/support.
For the latest version of this guide go to: http://www.zebra.com/support.
Zebra Technologies Corporation, Lincolnshire, IL USA
http://www.zebra.com
Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered
in many jurisdictions worldwide. All other trademarks are the property of
their respective owners.
© 2016 Symbol Technologies LLC, a subsidiary of Zebra Technologies
Corporation. All rights reserved.
HS3100
Quick Start Guide
MN-002762-01 Revision A — July 2016
OTH BTN
Features
Over-the-Head (OTH)
Behind-the-Neck (BTN)
Note: This guide applies to both the OTH and BTN
headband models, unless otherwise noted.
Buttons/LED
Charge the Battery
Insert the battery into the charger with the contacts facing forward.
Insert the Battery
Insert the battery with the contacts facing outward.
Power On Headset
Press the Main Function button to turn the power on. The headset LED
illuminates blue and flashes three times.
Pair Headset with Device
The headset can be paired in any of the following ways:
• Tap to Pair (NFC Pairing)
• Scan to Pair (Bar Code Pairing)
• Manual Pairing (Provisioning the HS MAC Address)
Position the Boom
Do not rotate the boom beyond the stop point.
* Applies to OTH model. The BTN model has only left side boom
placement.
Adjust the OTH Headband
The headband can be squeezed for a tighter fit to the head and clicks as it
is positioned into place. When adjusting the headband,
• Position the ear pad in the center of the ear.
• Position the T-Bar above the ear, half way between the top of the ear
and the top of the head.
* Applies to OTH model.
Adjust the BTN Headband Strap
Loosen or tighten the velcro closure on each end to increase or decrease
the length of the strap.
Slide the clips forward or backward to move the strap closer or further from
the headband.
* Applies to BTN model.
Adjust the Microphone
Position the microphone icon so that it is facing your mouth.
Adjust the Microphone Boom
Place the microphone two finger’s width away from the corner of your
mouth, so it is slightly to one side.
Mute the Microphone
Place the microphone boom in the upright position.
Adjust the Volume
Audio Tones and Prompts
Maintenance
Replace T-Bar
* Applies to OTH model.
Replace Headband Pad
Remove the T-Bar and then the headband pad.
Replace the headband pad and then the T-Bar.
* Applies to OTH model.
Replace Headband
Disassemble the headset to replace the headband.
Replace Ear Pad
Firmly grip and pull the ear pad and inner casing.
Align and snap the new fear pad into position.
Replace Windscreen
Remove the Battery
Buttons/
Function LED Indicator
Main Function Button
Power ON Blue and flashes three times
Power OFF Red and flashes three times
Pair Blue and Red alternate flash
Connection Status
Adjustable
Headband
Microphone with
Windscreen
Flexible Microphone
Boom
T-Bar
Single Ear
Piece
Battery
Ear Piece
Assembly
Disassembly
Knob
Buttons/
LED
Microphone with
Windscreen
Flexible Microphone
Boom
Disassembly
Knob
BTN
Headband
with
Adjustable
Strap
Battery
Buttons/
LED
Left Placement
Single Ear Piece
NFC Tag
Main
Function
Button
Volume
Not Connected Blue
Connected Blue flash every two seconds
Battery Status
Low Battery Shutdown Red and flashes three times
Low Battery Warning Red flashes twice every two seconds until
battery shutdown
Battery Charging (USB) Red
Main Function Button
NFC Tag
NFC Pairing Bar Code Pairing
Left Side Boom
Placement
Right Side Boom
Placement
Function Audio Tone/Prompts
Start Pairing Tone: Two short beeps - low
Successful Pairing Tone: Three beeps - raising
Device Connected Tone: One beep
Prompt: From the application
Bluetooth Link Lost Tone: Two low tones followed by high tone
Low Battery Tone: Two short beeps triggered every two
minutes until shutdown
Prompt: While connected from the application
Volume UP/DOWN Buttons
Low Backup Power
Time
Tone: ??
Prompt: ??
Mute Tone: Two tones failing
Un-mute Tone: Two tones raising
To On Tone: Four rising tones
To Low Power Tone: Four descending tones
1
2
3
4
![](/img.php?id=3057530&img=bg2.png)
More Information
For more information, refer to the HS3100 Bluetooth Headset User Guide.
Parts and Accessories
Regulatory Information
This device is approved under Zebra Technologies Corporation.
This guide applies to Model Number HS3100.
All Zebra devices are designed to be compliant with the rules and
regulations in the locations they are sold and will be labeled as required.
Local language translations are available at the following website:
www.zebra.com/support.
Any changes or modifications to Zebra equipment not expressly approved
by Zebra could void the user's authority to operate the equipment.
Bluetooth® Wireless
Technology
This is an approved Bluetooth® product. For more information or to view
the End Product Listing, please visit https://www.bluetooth.org/tpg/
listings.cfm.
Health and Safety
Recommendations
Safety on the Road
Do not take notes or use the device while driving. Jotting down a ‘to do’ list
or flipping through your address book takes attention away from your
primary responsibility; driving safely.
When driving a car, driving is your first responsibility - give your full
attention to driving. Check the laws and regulations on the use of wireless
devices in the areas where you drive. Always obey them.
Warnings for Use of
Wireless Devices
Please observe all warning notices with regard to the usage of wireless
devices.
RF Exposure Guidelines
Safety Information
Reducing RF Exposure - Use Properly
Only operate the device in accordance with the instructions supplied.
International
The device complies with internationally recognized standards covering
human exposure to electromagnetic fields from radio devices. For
information on 'International' human exposure to electromagnet fields,
refer to the Zebra Declaration of Conformity (DoC) at:
http://www.zebra.com/doc.
For further information on the safety of RF energy from wireless devices,
see
https://www.zebra.com/us/en/about-zebra/company-information/
corporate-responsibility.html located under Corporate Responsibility.
Batteries
EPA (Environmental Protection Administration) requires dry battery
producing or importing firms in accordance with Article 15 of the Waste
Disposal Act are required to indicate the recycling marks on the batteries
used in sales, giveaway, or promotion. Contact a qualified Taiwanese
recycler for proper battery disposal.
Battery Information
Use only Zebra approved batteries. Accessories which have battery
charging capability are approved for use with the following battery models:
Part Number BTRY-HS3100-HS-01 (3.7 VDC, 210 mAh).
Zebra approved rechargeable battery packs are designed and constructed
to the highest standards within the industry.
However, there are limitations as to how long a battery can operate or be
stored before needing replacement. Many factors affect the actual life
cycle of a battery pack such as heat, cold, harsh environmental conditions,
and severe drops.
When batteries are stored over six months, some irreversible deterioration
in overall battery quality may occur. Store batteries at half of full charge in
a dry, cool place, removed from the equipment to prevent loss of capacity,
rusting of metallic parts, and electrolyte leakage. When storing batteries
for one year or longer, the charge level should be verified at least once a
year and charged to half of full charge.
Replace the battery when a significant loss of run time is detected.
Standard warranty period for all Zebra batteries is one year, regardless if
the battery was purchased separately or included as part of the mobile
computer or bar code scanner. For more information on Zebra batteries,
please visit:
http://www.zebra.com/batterybasics.
Battery Safety Guidelines
The area in which the units are charged should be clear of debris and
combustible materials or chemicals. Particular care should be taken where
the device is charged in a non-commercial environment.
• Follow battery usage, storage, and charging guidelines found in the
user's guide.
• Improper battery use may result in a fire, explosion, or other hazard.
• To charge the mobile device battery, the battery and charger
temperatures must be between +32 ºF and +113 ºF (0 ºC and +45 ºC).
• Do not use incompatible batteries and chargers. Use of an
incompatible battery or charger may present a risk of fire, explosion,
leakage, or other hazard. If you have any questions about the
compatibility of a battery or a charger, contact Zebra support.
• For devices that utilize a USB port as a charging source, the device
shall only be connected to products that bear the USB-IF logo or have
completed the USB-IF compliance program.
• Do not disassemble or open, crush, bend or deform, puncture, or
shred.
• Severe impact from dropping any battery-operated device on a hard
surface could cause the battery to overheat.
• Do not short circuit a battery or allow metallic or conductive objects to
contact the battery terminals.
• Do not modify or remanufacture, attempt to insert foreign objects into
the battery, immerse or expose to water or other liquids, or expose to
fire, explosion, or other hazard.
• Do not leave or store the equipment in or near areas that might get
very hot, such as in a parked vehicle or near a radiator or other heat
source. Do not place battery into a microwave oven or dryer.
• Battery usage by children should be supervised.
• Please follow local regulations to promptly dispose of used re-
chargeable batteries.
• Do not dispose of batteries in fire.
• Seek medical advice immediately if a battery has been swallowed.
• In the event of a battery leak, do not allow the liquid to come in contact
with the skin or eyes. If contact has been made, wash the affected
area with large amounts of water and seek medical advice.
• If you suspect damage to your equipment or battery, contact Zebra
support to arrange for inspection.
Radio Frequency
Interference Requirements
- FCC
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Radio Frequency
Interference Requirements
- Canada
CAN ICES-3 (B)/NMB-3(B)
Radio Transmitters
This device complies with Industry Canada's license-exempt RSSs.
Operation is subject to the following two conditions: (1) This device may
not cause interference; and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage,
et (2) l'utilisateur de l'appareil doit accepter tout brouillage radio électrique
subi même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Marking and
European Economic
Area (EEA)
Bluetooth® Wireless Technology for use throughout the EEA has the
following restrictions:
• Maximum radiated transmit power of 100mW EIRP in the frequency
range 2.400 -2.4835 GHz.
Statement of Compliance
Zebra hereby declares that this radio equipment is in compliance with
Directive, 2011/65/EU and 1999/5/EC or 2014/53/EU (2014/53/EU
supersedes 1999/5/EC from 13th June 2017).
The full text of the EU Declaration of Conformity is available at the
following internet address: http://www.zebra.com/doc.
Waste Electrical and Electronic
Equipment (WEEE)
English: For EU Customers: All products at the end of their life must be
returned to Zebra for recycling. For information on how to return product,
please go to:
http://www.zebra.com/weee.
Français: Clients de l'Union Européenne: Tous les produits en fin de cycle
de vie doivent être retournés à Zebra pour recyclage. Pour de plus amples
informations sur le retour de produits, consultez : http://www.zebra.com/
weee.
Español: Para clientes en la Unión Europea: todos los productos deberán
entregarse a Zebra al final de su ciclo de vida para que sean reciclados. Si
desea más información sobre cómo devolver un producto, visite:
http://www.zebra.com/weee.
Bulgarish: За клиенти от ЕС: След края на полезния им живот всички
продукти трябва да се връщат на Zebra за рециклиране. За
информация относно връщането на продукти, моля отидете на адрес:
http://www.zebra.com/weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende
ihrer Lebensdauer zum Recycling an Zebra zurückgesandt werden.
Informationen zur Rücksendung von Produkten finden Sie unter
http://www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del
rispettivo ciclo di vita devono essere restituiti a Zebra al fine di consentirne
il riciclaggio. Per informazioni sulle modalità di restituzione, visitare il
seguente sito Web:
http://www.zebra.com/weee.
Português: Para clientes da UE: todos os produtos no fim de vida devem
ser devolvidos à Zebra para reciclagem. Para obter informações sobre
como devolver o produto, visite:
http://www.zebra.com/weee.
Nederlands: Voor klanten in de EU: alle producten dienen aan het einde
van hun levensduur naar Zebra te worden teruggezonden voor recycling.
Raadpleeg
http://www.zebra.com/weee voor meer informatie over het terugzenden
van producten.
Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z
eksploatacji należy zwrócić do firmy Zebra w celu ich utylizacji. Informacje
na temat zwrotu produktów znajdują się na stronie internetowej
http://www.zebra.com/weee.
Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení
jejich životnosti vrátit spoleènosti Zebra k recyklaci. Informace o zpùsobu
vrácení produktu najdete na webové stránce: http://www.zebra.com/weee.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada
taaskasutamise eesmärgil Zebra'ile. Lisainformatsiooni saamiseks toote
tagastamise kohta külastage palun aadressi: http://www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Zebra
vállalathoz kell eljuttatni újrahasznosítás céljából. A termék
visszajuttatásának módjával kapcsolatos tudnivalókért látogasson el a
http://www.zebra.com/weee weboldalra.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske
dobe vrniti podjetju Zebra za reciklažo. Za informacije o vračilu izdelka
obiščite:
http://www.zebra.com/weee.
Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd
måste returneras till Zebra för återvinning. Information om hur du
returnerar produkten finns på
http://www.zebra.com/weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on
palautettava kierrätettäväksi Zebra-yhtiöön, kun tuotetta ei enää käytetä.
Lisätietoja tuotteen palauttamisesta on osoitteessa http://www.zebra.com/
weee.
Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til
recirkulering, når de er udtjent. Læs oplysningerne om returnering af
produkter på: http://www.zebra.com/weee.
Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της
διάρκειας ζωής τους, πρέπει να επιστρέφονται στην Zebra για
ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την επιστροφή
ενός προϊόντος, επισκεφθείτε τη διεύθυνση http://www.zebra.com/weee
στο ∆ιαδίκτυο.
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta'
l-użu tagħhom, iridu jiġu rritornati għand Zebra għar-riċiklaġġ. Għal aktar
tagħrif dwar kif għandek tirritorna l-prodott, jekk jogħġbok żur:
http://www.zebra.com/weee.
Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei lor
de funcţionare, trebuie returnate la Zebra pentru reciclare. Pentru
informaţii despre returnarea produsului, accesaţi: http://www.zebra.com/
weee.
Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť po
uplynutí doby ich životnosti vrátené spoločnosti Zebra na recykláciu.
Bližšie informácie o vrátení výrobkov nájdete na: http://www.zebra.com/
weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui,
turi būti grąžinti utilizuoti į kompaniją „Zebra“. Daugiau informacijos, kaip
grąžinti gaminį, rasite:
http://www.zebra.com/weee.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir
jānogādā atpakaļ Zebra otrreizējai pārstrādei. Lai iegūtu informāciju par
produktu nogādāšanu Zebra, lūdzu, skatiet: http://www.zebra.com/weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri
dönüştürme için Zebra'ya iade edilmelidir. Ürünlerin nasıl iade edileceği
hakkında bilgi için lütfen şu adresi ziyaret edin: http://www.zebra.com/
weee.
TURKISH WEEE Statement of
Compliance for All Devices
EEE Yönetmeliğine Uygundur
Part Number Description
HS3100-OTH HS3100 Rugged Bluetooth
Headset (Over-the-Head
Headband)
HS3100-BTN-L HS3100 Rugged Bluetooth
Headset (Behind-the-Neck
Headband Left)
SAC-HS3100-B8W8-01 HS3100 8-Slot-Battery Charger
& 8-Slot-WT6000 Charger
SAC-HS3100-B8-01 HS3100 8-Slot-Battery Charger
A9310272-003 HS3100 8-Slot-Battery Charger
Spare Cup
BTRY-HS3100-HS1-01 HS3100 Single Battery
BTRY-HS3100-HS1-08 HS3100 Battery Pack of 8
KT-HSX100-OTH1-10 Over-the-Head Headband Pack
of 10
KT-HSX100-BTNL1-10 Behind-the-Neck Headband Left
Pack of 10
KT-HSX100-OTHP1-10 HSX100-OTH Headband Pad
Pack of 10
KT-HSX100-STRP1-10 HSX100-BTN Strap Pack of 10
KT-HSX100-EPF1-20 HSX100 Headset Foam Ear Pad
Pack of 20
KT-HSX100-EPL1-20 HSX100 Headset Leatherette
Ear Pad Pack of 20
KT-HSX100-MWS1-50 HSX100 Headset Series
Microphone Windscreen Pack of
50
CBL-HS3100-CUC1-01 USB TYPE-A 36" (0.9M)
CHARGING AND
COMMUNICATION CABLE
KT-HSX100-TBP1-20 T-BAR WITH PAD PACK OF 20
CAUTION Risk of explosion if battery is
replaced by an incorrect
type.
Dispose of batteries
according to instructions.