Zebra Technologies MC55N0 Enterprise Digital Assistant (EDA) User Manual

Zebra Technologies Corporation Enterprise Digital Assistant (EDA)

User Manual

Download: Zebra Technologies MC55N0 Enterprise Digital Assistant (EDA) User Manual
Mirror Download [FCC.gov]Zebra Technologies MC55N0 Enterprise Digital Assistant (EDA) User Manual
Document ID2664068
Application IDgCbyMgka/d47pDWWz1z2hA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize92.63kB (1157893 bits)
Date Submitted2015-07-01 00:00:00
Date Available2015-07-02 00:00:00
Creation Date2017-09-26 11:02:23
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-09-26 11:02:23
Document TitleMC55A0/MC55N0 Regulatory Guide [English] (P/N 72-148112-02 Rev. A)
Document CreatorFrameMaker 12.0.2
Document Author: Motorola, Inc.

MC55A0
MC55N0
REGULATORY GUIDE
Regulatory Information
This guide applies to the following Model Numbers: MC55A0, MC55N0.
All Zebra devices are designed to be compliant with rules and regulations in locations they
are sold and will be labeled as required.
Local language translations are available at the following website:
http://www.zebra.com/support
Any changes or modifications to Zebra equipment, not expressly approved by Zebra, could
void the user's authority to operate the equipment.
CAUTION
Only use Zebra approved and UL Listed accessories, battery packs and
battery chargers.
Do NOT attempt to charge damp/wet mobile computers or batteries. All
components must be dry before connecting to an external power source.
Declared maximum operating temperature: 50°C.
Bluetooth® Wireless Technology
This is an approved Bluetooth product. For more information or to view the End Product
Listing, please visit http://www.bluetooth.org/tpg/listings.cfm.
Wireless Devices Country Approvals
Regulatory markings, subject to certification, are applied to the device signifying the radio(s)
are approved for use in the following countries: United States, Canada, Japan, S. Korea,
Australia, and Europe1.
Please refer to the Zebra Declaration of Conformity (DoC) for details of other country
markings. This is available at http://www.zebra.com/doc.
Note1: For 2.4 GHz or 5 GHz Products: Europe includes, Austria, Belgium, Bulgaria, Czech
Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the
United Kingdom.
Country Roaming
This device incorporates the International Roaming feature (IEEE802.11d) which will ensure
the product operates on the correct channels for the particular country of use.
Ad-Hoc Operation (2.4 GHz band)
Ad-Hoc operation is limited to Channels 1-11 (2412-2462 MHz).
Frequency of Operation – IC
5 GHz Only
The use in the UNII (Unlicensed National Information Infrastructure) band 1 5150-5250 MHz
band is restricted to Indoor Use Only; any other use will make the operation of this device
illegal.
Industry Canada Statement:
Zebra reserves the right to make changes to any product to improve reliability, function, or
design. Zebra does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein. No license is
granted, either expressly or by implication, estoppel, or otherwise under any patent right or
patent, covering or relating to any combination, system, apparatus, machine, material,
method, or process in which Zebra products might be used. An implied license exists only
for equipment, circuits, and subsystems contained in Zebra products.
Warranty
For the complete Zebra hardware product warranty statement, go to: http://www.zebra.com/
warranty.
Service Information
Caution: The device for the band 5150-5250 MHz is only for indoor usage to reduce
potential for harmful interference to co-Channel mobile satellite systems. High power radars
are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 56505850 MHz and these radars could cause interference and/or damage to LE-LAN devices.
Avertissement: Le dispositive fonctionnant dans la bande 5150-5250 MHz est réservé
uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage
préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
Les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d.,
qu'ils ont la priorité) pour les bands 5250-5350 MHz et 5650-5850 MHz et que ces radars
pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The range
of channels is limited by firmware.
Health and Safety Recommendations
Ergonomic Recommendations
CAUTION
•
•
•
•
•
•
•
•
•
•
•
•
In order to avoid or minimize the potential risk of ergonomic injury follow the
recommendations below. Consult with your local Health & Safety Manager to
ensure that you are adhering to your company’s safety programs to prevent
employee injury.
Reduce or eliminate repetitive motion
Maintain a neutral postures
Reduce or eliminate excessive force
Keep objects that are used frequently within easy reach
Perform tasks at correct heights
Reduce or eliminate vibration
Reduce or eliminate direct pressure
Provide adjustable workstations
Provide adequate clearance
Provide a suitable working environment
Improve work procedures
Alternate hands whenever possible when performing a repetitive task.
Vehicle Installation
Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many
jurisdictions worldwide. All other trademarks are the property of their respective owners.
©2015 ZIH Corp and/or its affiliates. All rights reserved.
72-148112-03 Rev. A — June 2015
•
Do not put your phone in a location that obstructs the drivers vision or interferes with the
operation of the Vehicle.
Do not cover an airbag.
Safety on the Road
Do not take notes or use the device while driving. Jotting down a “to do” list or flipping
through your address book takes attention away from your primary responsibility, driving
safely.
When driving a car, driving is your first responsibility - Give full attention to driving. Check the
laws and regulations on the use of wireless devices in the areas where you drive. Always
obey them.
When using a wireless device behind the wheel of a car, practice good common sense and
remember the following tips:
1. Get to know your wireless device and any features such as speed dial and redial. If
available, these features help you to place your call without taking your attention off the
road.
2. When available, use a hands free device.
3. Let the person you are speaking with know you are driving; if necessary, suspend the call
in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy
traffic can be hazardous.
4. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or
before pulling into traffic. Try to plan calls when your car will be stationary. If you need to
make a call while moving, dial only a few numbers, check the road and your mirrors, then
continue.
5. Do not engage in stressful or emotional conversations that may be distracting. Make
people you are talking with aware you are driving and suspend conversations that have
the potential to divert your attention from the road.
6. Use your wireless phone to call for help. Dial the Emergency services, (9-1-1 in the US,
and 1-1-2 in Europe) or other local emergency number in the case of fire, traffic accident
or medical emergencies. Remember, it is a free call on your wireless phone! The call can
be made regardless of any security codes and depending on a network, with or without a
SIM card inserted.
7. Use your wireless phone to help others in emergencies. If you see an auto accident,
crime in progress or other serious emergency where lives are in danger, call the
Emergency Services, (9-1-1 in the US, and 1-1-2 in Europe) or other local emergency
number, as you would want others to do for you.
8. Call roadside assistance or a special non-emergency wireless assistance number when
necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic
signal, a minor traffic accident where no one appears injured, or a vehicle you know to be
stolen, call roadside assistance or other special non-emergency wireless number.
“The wireless industry reminds you to use your device / phone safely when driving.”
RF signals may affect improperly installed or inadequately shielded electronic systems in
motor vehicles (including safety systems). Check with the manufacturer or its representative
regarding your vehicle. You should also consult the manufacturer of any equipment that has
been added to your vehicle.
An air bag inflates with great force. DO NOT place objects, including either installed or
portable wireless equipment, in the area over the air bag or in the air bag deployment area.
If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury
could result.
Position your device within easy reach. Be able to access your device without removing your
eyes from the road.
Note: Connection to an alert device that will cause a vehicle horn to sound or lights to flash,
on receipt of a call on public roads, is not permitted.
IMPORTANT: Before installing or using, check state and local laws regarding windshield
mounting and use of equipment.
For Safe Installation:
US and Canada
Phones (placed to ear or used with headset)
Use only Zebra tested and approved belt-clips, holsters, and similar accessories to ensure
FCC Compliance. The use of third-party belt-clips, holsters, and similar accessories may not
comply with FCC RF exposure compliance requirements, and should be avoided. The FCC
has granted an Equipment Authorization for these model phones with all reported SAR
levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on
these model phones is on file with the FCC and can be found under the Display Grant
section of http://www.fcc.gov/oet/ea/fccid.
Co-located Statement
To comply with FCC RF exposure compliance requirement, the antenna used for this
transmitter must not be co-located or operating in conjunction with any other transmitter/
antenna except those already approved in this filing.
Handheld Devices
This device was tested for typical body-worn operation. Use only Zebra tested and approved
belt-clips, holsters, and similar accessories to ensure FCC Compliance. The use of thirdparty belt-clips, holsters, and similar accessories may not comply with FCC RF exposure
compliance requirements, and should be avoided.
Laser Devices
Complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice
No. 50, dated June 24, 2007 and IEC 60825-1 (Ed. 2.0), EN60825-1: 2007. The laser
classification is marked on one of the labels on the device.
Class 2 laser scanners use a low power, visible light diode. As with any very bright light
source, such as the sun, the user should avoid staring directly into the light beam.
Momentary exposure to a Class 2 laser is not known to be harmful.
Scanner Labeling
Warnings for Use of Wireless Devices
Please observe all warning notices with regard to the usage of wireless devices.
Potentially Hazardous Atmospheres
You are reminded of the need to observe restrictions on the use of radio devices in fuel
depots, chemical plants etc. and areas where the air contains chemicals or particles (such
as grain, dust, or metal powders) and any other area where you would normally be advised
to turn off your vehicle engine.
Safety in Aircraft
Switch off your wireless device whenever you are instructed to do so by airport or airline
staff. If your device offers a 'flight mode' or similar feature, consult airline staff as to its use in
flight.
Safety in Hospitals
2.4 GHz Only
If you have a problem using the equipment, contact your facility’s Technical or Systems
Support. If there is a problem with the equipment, they will contact the Zebra Support at:
http://www.zebra.com/support.
For the latest version of this guide go to: http://www.zebra.com/support.
Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
http://www.zebra.com
•
Wireless devices transmit radio frequency energy and may affect medical electrical
equipment.
Wireless devices should be switched off wherever you are requested to do so in hospitals,
clinics or healthcare facilities. These requests are designed to prevent possible interference
with sensitive medical equipment.
Pacemakers
Pacemaker manufacturers recommended that a minimum of 15 cm (6 inches) be maintained
between a handheld wireless device and a pacemaker to avoid potential interference with
the pacemaker. These recommendations are consistent with independent research and
recommendations by Wireless Technology Research.
Persons with pacemakers:
• Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when
turned ON.
• Should not carry the device in a breast pocket.
• Should use the ear furthest from the pacemaker to minimize the potential for interference.
• If you have any reason to suspect that interference is taking place, turn OFF your device.
Other Medical Devices
Please consult your physician or the manufacturer of the medical device, to determine if the
operation of your wireless product may interfere with the medical device.
RF Exposure Guidelines
Safety Information
Reducing RF Exposure - Use Properly
Only operate the device in accordance with the instructions supplied.
International
The device complies with internationally recognized standards covering human exposure to
electromagnetic fields from radio devices. For information on “International” human
exposure to electromagnetic fields refer to the Zebra Declaration of Conformity (DoC) at
http://www.zebra.com/doc.
Europe
Handheld Devices
This device was tested for typical body-worn operation. Use only Zebra tested and approved
belt-clips, holsters, and similar accessories to ensure EU Compliance.
Camera Flash Option Only
LED LIGHT
DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS
CLASS 1M LED PRODUCT
Power Supply
Use ONLY a LISTED, Type no. 50-14000 (5.4 VDC / 3 A) or PWRS-14000 (5.4 VDC / 3 A),
Direct Plug-In Power supply, marked Class 2 or LPS (IEC60950-1, SELV). Use of alternative
power supply will invalidate any approvals given to this unit and may be dangerous.
Batteries
Taiwan - Recycling
EPA (Environmental Protection Administration) requires dry battery
producing or importing firms in accordance with Article 15 of the Waste
Disposal Act are required to indicate the recycling marks on the
batteries used in sales, giveaway or promotion. Contact a qualified
Taiwanese recycler for proper battery disposal.
Battery Information
Use only Zebra approved batteries. Accessories which have battery charging capability are
approved for use with the following battery models:
Zebra 82-107172-xx (5.4 VDC, 2400 mAh)
Zebra 82-111094-xx (5.4 VDC, 3600 mAh)
Zebra rechargeable battery packs are designed and constructed to the highest standards
within the industry.
However, there are limitations to how long a battery can operate or be stored before needing
replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold,
harsh environmental conditions and severe drops.
When batteries are stored over six (6) months, some irreversible deterioration in overall
battery quality may occur. Store batteries at half of full charge in a dry, cool place, removed
from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte
leakage. When storing batteries for one year or longer, the charge level should be verified at
least once a year and charged to half of full charge.
Replace the battery when a significant loss of run time is detected.
Standard warranty period for all Zebra batteries is one year, regardless if the battery was
purchased separately or included as part of the mobile computer. For more information on
Zebra batteries, please visit: http://www.zebra.com/batterybasics.
Battery Safety Guidelines
•
•
•
•
The area in which the units are charged should be clear of debris and combustible
materials or chemicals. Particular care should be taken where the device is charged in a
non commercial environment.
Follow battery usage, storage, and charging guidelines found in the user's guide.
Improper battery use may result in a fire, explosion, or other hazard.
To charge the mobile device battery, the battery and charger temperatures must be
between +32ºF and +104ºF (0ºC and +40ºC)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Do not use incompatible batteries and chargers. Use of an incompatible battery or
charger may present a risk of fire, explosion, leakage, or other hazard. If you have any
questions about the compatibility of a battery or a charger, contact Zebra support.
To enable authentication of an approved battery, as required by IEEE1725 clause 10.2.1,
all batteries will carry a Zebra hologram. Do not fit any battery without checking it has the
Zebra authentication hologram.
For devices that utilize a USB port as a charging source, the device shall only be
connected to products that bear the USB-IF logo or have completed the USB-IF
compliance program.
Do not disassemble or open, crush, bend or deform, puncture, or shred.
Severe impact from dropping any battery-operated device on a hard surface could cause
the battery to overheat.
Do not short circuit a battery or allow metallic or conductive objects to contact the battery
terminals.
Do not modify or remanufacture, attempt to insert foreign objects into the battery,
immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard.
Do not leave or store the equipment in or near areas that might get very hot, such as in a
parked vehicle or near a radiator or other heat source. Do not place battery into a
microwave oven or dryer.
Battery usage by children should be supervised.
Please follow local regulations to promptly dispose of used re-chargeable batteries.
Do not dispose of batteries in fire.
Seek medical advice immediately if a battery has been swallowed.
In the event of a battery leak, do not allow the liquid to come in contact with the skin or
eyes. If contact has been made, wash the affected area with large amounts of water and
seek medical advice.
If you suspect damage to your equipment or battery, contact Zebra support to arrange for
inspection.
Use with Hearing Aids
When some wireless devices are used near some hearing devices (hearing aids and
cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing
devices are more immune than others to this interference noise, and wireless devices also
vary in the amount of interference they generate. In the event of interference you may want
to consult your hearing aid supplier to discuss solutions.
The wireless telephone industry has developed ratings for some of their mobile phones, to
assist hearing device users in finding phones that may be compatible with their hearing
devices. Not all phones have been rated. Zebra terminals that are rated have the rating
included on the Declaration of Conformity (DoC) at http://www.zebra.com/doc.
The ratings are not guarantees. Results will vary depending on the user’s hearing device
and hearing loss. If your hearing device happens to be vulnerable to interference, you may
not be able to use a rated phone successfully. Trying out the phone with your hearing device
is the best way to evaluate it for your personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less
interference to hearing devices than phones that are not labeled. M4 is the better/higher of
the two ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable
with a hearing device’s telecoil (“T Switch” or “Telephone Switch”) than unrated phones. T4
is the better/higher of the two ratings. (Note that not all hearing devices have telecoils in
them.)
Hearing devices may also be measured for immunity to this type of interference. Your
hearing device manufacturer or hearing health professional may help you find results for
your hearing device. The more immune your hearing aid is, the less likely you are to
experience interference noise from mobile phones.
Radio Frequency Interference Requirements-FCC
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected
• Consult the dealer or an experienced radio/TV technician for help.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Radio Frequency Interference Requirements - Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Radio Transmitters
For RLAN Devices:
The use of 5 GHz RLAN's, for use in Canada, have the following restrictions:
• Restricted Band 5.60 - 5.65 GHz
This device complies with RSS 210 of Industry & Science Canada. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils
radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1)
le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter
tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement
indésirable.
Label Marking: The Term “IC:” before the radio certification only signifies that Industry
Canada technical specifications were met.
The use of 2.4 GHz RLAN's, for use through the EEA, have the following restrictions:
• Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 2.4835 GHz
Bluetooth® Wireless Technology for use through the EEA has the following restrictions:
• Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400 -2.4835
GHz
Statement of Compliance
Zebra, hereby, declares that this device is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC and 2011/65/EU. A Declaration of
Conformity may be obtained from http://www.zebra.com/doc.
Japan (VCCI) - Voluntary Control Council for Interference
Class B ITE

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Author                          : Motorola, Inc.
Create Date                     : 2007:11:13 15:03:37Z
Keywords                        : MC55A0, MC55N0, RG, Regulatory, Guide
Modify Date                     : 2015:06:29 15:44:47+08:00
Language                        : en
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 11.0 (Windows)
Format                          : application/pdf
Title                           : MC55A0/MC55N0 Regulatory Guide [English] (P/N 72-148112-02 Rev. A)
Creator                         : Motorola, Inc.
Creator Tool                    : FrameMaker 12.0.2
Metadata Date                   : 2015:06:29 15:44:47+08:00
Copyright                       : 2015
Document ID                     : uuid:d8c84ee8-e141-4d41-9ae0-b6c7c35112b9
Instance ID                     : uuid:1e89c81b-4ba7-450d-a93f-a84b78bcde72
Page Mode                       : UseNone
Page Count                      : 2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: UZ7MC55N0

Navigation menu