Zebra Technologies MC659B ENTERPRISE DIGITAL ASSISTANT (EDA) User Manual MC55 User Guide P N 72E 108859 02 Rev A

Download:
Mirror Download [FCC.gov]
Document ID	1280112
Application ID	MOZYHEIMN/5LaNxVC3puzQ==
Document Description	Users Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	392.77kB (4909594 bits)
Date Submitted	2010-05-12 00:00:00
Date Available	2010-11-08 00:00:00
Creation Date	2010-03-04 20:15:14
Producing Software	Acrobat Distiller 9.3.0 (Windows)
Document Lastmod	2010-03-08 20:39:49
Document Title	MC55 User Guide (P/N 72E-108859-02 Rev. A)
Document Creator	FrameMaker 8.0
Document Author:	Motorola, Inc.

Using the MC65 2 - 25
Table 2-6 MC65 Numeric Keypad Descriptions (Continued)
Key
Description
Talk (Green Phone): press to display the phone keypad window or to dial a phone number
(from the phone keypad window).
When on a phone call, press to place the call on hold.
Use this key in conjunction with the Blue key to instantly display the Start menu from any
application without tapping the screen. This function is user programmable.
Scan (yellow)
Activates the scanner/imager in a scan enabled application.
End/OK
End (Red Phone): press when the phone keypad window displays to stop dialing or end a
call.
Use this key in conjunction with the Blue key as an OK or close button. This function is user
programmable.
Scroll Up and Left
Moves up one item.
Moves left one item when pressed with the Orange key.
el
im
in
ar
Talk/Start Menu
Moves down one item.
Moves right one item when pressed with the Orange key.
Soft Keys
Accesses the command or menu above it on the screen.
Pr
Scroll Down and
Right
Star
Produces an asterisk in default state.
Press and release the blue key, then press the Star key to open the Start menu.
Alphanumeric
In default state, produces the numeric value on the key.
In Alpha state, produces the lower case alphabetic characters on the key. Each key press
produces the next alphabetic character in sequence. For example, press and release the
Orange key and then press the ‘4’ key once to produce the letter ‘g’; press and release the
Orange key and then press the ‘4’ key three times to produce the letter ‘i’.
Press the SHIFT key in Alpha state to produce the upper case alphabetic characters on the
key. For example, press and release the Orange key, press and release the SHIFT key, and
then press the ‘4’ key once to produce the letter ‘G’; press and release the Orange key,
press and release the SHIFT key and then press the ‘4’ key three times to produce the letter
‘I’.
2 - 26 MC65 User Guide
Table 2-6 MC65 Numeric Keypad Descriptions (Continued)
Key
Description
Backspace
Produces a backspace.
SHIFT
Press and release the SHIFT key to activate the keypad alternate SHIFT functions.
ar
A single press displays the following icon at the bottom of the screen, until a second key is
pressed:
Press the Orange key, then the Shift key to add a temporary shift (that applies only to the
next key pressed) to the orange lock state. This displays the following icon at the bottom of
the screen:
Executes a selected item or function.
el
im
in
Enter
Table 2-7 Numeric Keypad Input Modes
Orange Key
(Alpha Lowercase Mode)
Numeric Mode
Key
Blue+
Key
F1
Pr
SHIFT
+ Key
1st
Press
2nd
Press
3rd
Press
4th
Press
Orange + Shift Keys
(Alpha Uppercase Mode)
1st
Press
2nd
Press
3rd
Press
4th
Press
F2
F3
F4
F5
F6
F7
F8
F9
F10
Note: An application can change the key functions. The keypad may not function exactly as described.
Using the MC65 2 - 27
Table 2-7 Numeric Keypad Input Modes (Continued)
Orange Key
(Alpha Lowercase Mode)
Numeric Mode
Orange + Shift Keys
(Alpha Uppercase Mode)
Key
Blue+
Key
SHIFT
+ Key
1st
Press
2nd
Press
3rd
Press
4th
Press
1st
Press
Up
Up
Hilight
Up
Left
Left
Down
Down
Down
Hilight
Down
Right
Right
Enter
Action
Action
Action
Action
3rd
Press
ar
Up
2nd
Press
4th
Press
Action
Note: An application can change the key functions. The keypad may not function exactly as described.
Alpha-numeric Keypad Configurations
el
im
in
The three types of alpha-numeric keypads (QWERTY, AZERTY and QWERTZ) produce the 26-character alphabet
(A-Z, both lowercase and uppercase), numbers (0-9), and assorted characters. The keypad is color-coded to
indicate which modifier key to press to produce a particular character or action. The keypad default is alphabetic,
producing lowercase letters. See Table 2-8 for key and button descriptions and Table 2-9 on page 2-30 for the
keypad’s special functions. AZERTY keypad is used on configurations installed with the French operating system.
QWERTZ keypad is used on configurations installed with the German operating system.
Pr
ok
Figure 2-33 QWERTY Keypad Configuration
2 - 28 MC65 User Guide
ar
ok
el
im
ok
in
Figure 2-34 AZERTY Keypad Configuration
Pr
Figure 2-35 QWERTZ Keypad Configuration
Using the MC65 2 - 29
Table 2-8 Alpha-numeric Keypad Descriptions
Key
Action
Blue Key
Press the Blue key once to activate this mode temporarily, followed by another key. This
displays the following icon at the bottom of the screen, until a second key is
pressed:
Press the Blue key twice to lock this mode. This displays the following icon at the bottom
ar
of the screen:
Press the Blue key a third time to unlock.
Orange Key
Accesses the secondary layer of characters and actions (shown on the keypad in
orange).
Press the Orange key once to activate this mode temporarily, followed by another key.
This displays the following icon at the bottom of the screen, until a second key is
pressed:
in
Press the Orange key twice to lock this mode. This displays the following icon at the
bottom of the screen:
Press the Orange key a third time to unlock.
Talk (Green Phone): press to display the phone keypad window or to dial a phone number
(from the phone keypad window).
When on a phone call, press to place the call on hold.
Use this key in conjunction with the Blue key to instantly display the Start menu from any
application without tapping the screen. This function is user programmable.
Scan (yellow)
Activates the scanner/imager in a scan enabled application.
Pr
el
im
Talk/Start Menu
End/OK
ok
End (Red Phone): press when the phone keypad window displays to stop dialing or end a
call.
Use this key in conjunction with the Blue key as an OK or close button. This function is
user programmable.
Scroll Up and Left
Moves up one item.
Moves left one item when pressed with the Orange key.
Scroll Down and Right
Moves down one item.
Moves right one item when pressed with the Orange key.
2 - 30 MC65 User Guide
Table 2-8 Alpha-numeric Keypad Descriptions (Continued)
Key
Action
Soft Keys
Accesses the command or menu above it on the screen.
Shift
Changes the state of the alpha characters from lowercase to uppercase.
• Press the Shift key to activate this mode temporarily, followed by another key.
This displays the following icon at the bottom of the screen, until a second key is
ar
pressed:
• Press the Shift key twice to lock this mode. This displays the following icon at the
bottom of the screen:
Press the Shift key a third time to unlock.
Turns the display backlight on and off.
Backspace
Produces a backspace.
el
im
in
Backlight
Enter
Executes a selected item or function.
Produces an asterisk.
Pr
Star
au
Creates special characters.
Table 2-9 QWERTY Keypad Input Modes
Key
Normal
Shift + Key
Orange + Key
Blue + Key
Note: An application can change the key functions. The keypad may not function exactly as described.
Using the MC65 2 - 31
Table 2-9 QWERTY Keypad Input Modes (Continued)
Key
Normal
Shift + Key
Orange + Key
Blue + Key
“
Backspace
Shift
in
‘
Backspace
Backspace
Backspace
Backspace
Shift
Shift-Lock
Shift
Shift
Pr
áü
el
im
ar
ENTER
Enter
Enter
Enter
Enter
TAB
Tab
Tab
Back tab
Tab
SPACE
Space
Space
Space
Space
Note: An application can change the key functions. The keypad may not function exactly as described.
2 - 32 MC65 User Guide
Table 2-9 QWERTY Keypad Input Modes (Continued)
Key
Normal
Shift + Key
Orange + Key
Blue + Key
Backlight
Backlight
Backlight
Backlight
Backlight
. (Period)
Note: An application can change the key functions. The keypad may not function exactly as described.
Key
Normal
Shift + Key
“
áü
Pr
el
im
Orange + Key
in
ar
Table 2-10 AZERTY Keypad Input Modes
Blue + Key
‘
Backspace
Backspace
Backspace
Backspace
Backspace
Shift
Shift
Shift-Lock
Shift
Shift
Note: An application can change the key functions. The keypad may not function exactly as described.
Using the MC65 2 - 33
Table 2-10 AZERTY Keypad Input Modes (Continued)
Key
Normal
Shift + Key
Orange + Key
Blue + Key
Enter
Enter
Enter
TAB
Tab
Tab
SPACE
Space
Space
Backlight
Backlight
Backlight
. (Period)
ar
Enter
Back tab
Tab
Space
Space
Backlight
Backlight
in
Enter
el
im
Note: An application can change the key functions. The keypad may not function exactly as described.
Table 2-11 QWERTZ Keypad Input Modes
Key
Shift + Key
Orange + Key
Blue + Key
Pr
Normal
“
áü
Note: An application can change the key functions. The keypad may not function exactly as described.
2 - 34 MC65 User Guide
Table 2-11 QWERTZ Keypad Input Modes (Continued)
Key
Normal
Shift + Key
Orange + Key
Blue + Key
‘
Backspace
Backspace
Shift
Shift
ENTER
TAB
SPACE
Backlight
in
Enter
ENTER
ENTER
Enter
Tab
Tab
Back tab
Tab
Space
Space
Space
Space
Backlight
Backlight
Backlight
Backlight
Pr
. (Period)
el
im
ar
Note: An application can change the key functions. The keypad may not function exactly as described.
PIM Keypad Configuration
The PIM keypad contains application keys and scroll keys. Note that an application can change keypad functions
so the MC65’s keypad may not function exactly as described. See Table 2-6 for key and button descriptions and
Table 2-7 on page 2-26 for the keypad’s special functions.
ar
Using the MC65 2 - 35
Figure 2-36 MC65 PIM Keypad
Table 2-12 MC65 PIM Keypad Descriptions
Description
This key is user programmable.
To use a key as an application key (APP key) on the keyboard, create and install a new
keyboard remap table. However, to remap the green phone key as APP keys through the
registry, create an XML provisioning file that includes the following entry:
el
im
Talk (Green Phone)
in
Key


[where xx is the new APP key code]
Provision the file to the MC65 to send an APP key code, instead of the original key code,
upon pressing the green phone key. Refer to the MC65 Integrator Guide for information
on creating XML provisioning files.
This key is user programmable.
To use a key as an application key (APP key) on the keyboard, create and install a new
keyboard remap table. However, to remap the green phone key as APP keys through the
registry, create an XML provisioning file that includes the following entry:
Pr
End (Red Phone)


[where yy is the new APP key code]
Provision the file to the MC65 to send an APP key code, instead of the original key code,
upon pressing the red phone key. Refer to the MC65 Integrator Guide for information on
creating XML provisioning files.
Scan (yellow)
Activates the scanner/imager in a scan enabled application.
2 - 36 MC65 User Guide
Table 2-12 MC65 PIM Keypad Descriptions (Continued)
Key
Description
Moves up one item.
Scroll Down
Moves up down item.
Scroll Left
Moves left one item.
Scroll Right
Moves right one item.
Soft Keys
Accesses the command or menu above it on the screen.
in
el
im
Enter
ar
Scroll Up
Executes a selected item or function.
Use this key as an OK or close button.
Pr
OK
Special Character Key
NOTE
Special characters are only available on the alpha-numeric keypad configurations.
To add special characters using the MC65 áü key, type the related character first, then press the Orange twice
followed by the áü (P) key. Continue pressing the áü key until the special character displays. To modify an existing
Using the MC65 2 - 37
character, move the cursor to the right of the character then press the Orange key twice and then press the áü key
until the special character replaces the original character. Table 2-13 lists the special characters you can generate.
Table 2-13 Special Characters
Special Characters
Key
in
“
Pr
el
im
‘
Special Characters
ar
Key
2 - 38 MC65 User Guide
Function Buttons
The MC65’s buttons perform certain functions.
ar
Scan/Action
Button
Action Button
Scan/Action
Button
el
im
Power Button
in
Volume
Up/Down
Button
Figure 2-37 Function Buttons
• Power: Press the red Power button to turn the MC65 screen on and off. The MC65 is in suspend mode when
the screen is off. For more information, see Powering On the MC65 on page 1-8. Also use the Power button
to reset the MC65 by performing a warm or cold boot. See Resetting the MC65 on page 2-16.
• Scan/Action: Press to scan bar codes or capture images. See Data Capture on page 2-40.
Or, press to open an application or perform a function. See the Microsoft® Applications for Mobile 6 User
Guide to set an application to open.
• Volume Up/Down: Press to increase or decrease the MC65’s volume.
Pr
• Action: Press to open an application or perform a function. See the Microsoft® Applications for Windows
Mobile 6 User Guide to set an application to open.
Stylus
Use the MC65 stylus to select items and enter information. The stylus functions as a mouse.
• Tap: Touch the screen once with the stylus to press option buttons and open menu items.
• Tap and Hold: Tap and hold the stylus on an item to see a list of actions available for that item. On the pop-up
menu that appears, tap the action to perform.
• Drag: Hold the stylus on the screen and drag across the screen to select text and images. Drag in a list to
select multiple items.
CAUTION
To prevent damage to the screen, do not use any device other than the Motorola-provided stylus.
Using the MC65 2 - 39
Entering Data
el
im
in
ar
When entering data on the keypad, use either the single-hand method or the two-hand method as shown in Figure
2-38.
Single-hand Method
Pr
Figure 2-38 Entering Data on the Keypad
Two-hand Method
2 - 40 MC65 User Guide
Data Capture
The MC65 offers three types of data capture options:
• Imaging
• Digital camera.
To perform data capture a scanning enabled application must be installed on the MC65. A sample scanning
application can be downloaded from the Motorola Support site at http://support.symbol.com.
Imaging
MC65 with an integrated imager have the following features:
ar
NOTE
• Omnidirectional reading of a variety of bar code symbologies, including the most popular linear, postal,
PDF417, and 2D matrix code types.
in
• The ability to capture and download images to a host for a variety of imaging applications.
• Advanced intuitive laser aiming cross-hair and dot aiming) for easy point-and-shoot operation.
el
im
The imager uses digital camera technology to take a digital picture of a bar code, stores the resulting image in its
memory, and executes state-of-the-art software decoding algorithms to extract the data from the image.
Operational Modes
MC65 with an integrated imager support three modes of operation, listed below. Activate each mode by pressing
the Scan button.
• Decode Mode: In this mode, the MC65 attempts to locate and decode enabled bar codes within its field of
view. The imager remains in this mode as long as you hold the scan button, or until it decodes a bar code.
NOTE
To enable Pick List Mode, download the Control Panel applet from the Support Central web site at
http://support.symbol.com. Pick List can also be set in an application using a API command.
Pr
• Pick List Mode: This mode allows you to selectively decode a bar code when more than one bar code is in
the MC65’s field of view. To accomplish this, move the aiming crosshair or dot over the required bar code to
decode only this bar code. This feature is ideal for pick lists containing multiple bar codes and manufacturing
or transport labels containing more than one bar code type (either 1D or 2D).
• Image Capture Mode: Use this mode to capture an image within the MC65’s field of view. This is useful for
capturing signatures or images of items like damaged boxes.
Digital Camera
MC65 with an integrated digital camera have the following features:
• Omnidirectional reading of a variety of bar code symbologies, including the most popular linear, postal,
PDF417, and 2D matrix code types.
• Advanced intuitive aiming for easy point-and-shoot operation.
The camera uses digital camera technology to take a digital picture of a bar code, stores the resulting image in its
memory, and executes state-of-the-art software decoding algorithms to extract the data from the image.
Using the MC65 2 - 41
Scanning Considerations
Typically, scanning is a simple matter of aim, scan, and decode and a few quick trial efforts master it. However,
consider the following to optimize scanning performance:
• Range
Any scanning device decodes well over a particular working range — minimum and maximum distances from
the bar code. This range varies according to bar code density and scanning device optics.
• Angle
ar
Scanning within range brings quick and constant decodes; scanning too close or too far away prevents
decodes. Move the scanner closer and further away to find the right working range for the bar codes being
scanned.
Scanning angle is important for promoting quick decodes. When laser beams reflect directly back into the
scanner from the bar code, this specular reflection can “blind” the scanner.
To avoid this, scan the bar code so that the beam does not bounce directly back. But don’t scan at too sharp
an angle; the scanner needs to collect scattered reflections from the scan to make a successful decode.
Practice quickly shows what tolerances to work within.
in
• Hold the MC65 farther away for larger symbols.
• Move the MC65 closer for symbols with bars that are close together.
Scanning procedures depend on the application and MC65 configuration. An application may use different
scanning procedures from the one listed above.
el
im
NOTE
Imager Scanning
Ensure that a scan-enabled application is loaded on the MC65.
2.
Aim the scan window at the bar code.
Pr
1.
Figure 2-39 Imager Scanning
3.
Press the scan button.
The red laser aiming pattern or aiming dot turns on to assist in aiming. Ensure the bar code is within the area
formed by the brackets in the aiming pattern or close to the aiming dot. The aiming dot is used for increased
visibility in bright lighting conditions.
The Scan/Decode LED lights red to indicate that scanning is in process, then lights green and a beep sounds,
by default, to indicate the bar code was decoded successfully. Note that when the MC65 is in Pick List Mode,
the imager does not decode the bar code until the crosshair or aiming dot touches the bar code.
2 - 42 MC65 User Guide
Linear bar code
PDF417 symbol
Linear bar code
Symbol
Symbol
View Finder
(Aiming Pattern)
Aiming Dot
Correct
Figure 2-40 Imager Aiming Pattern: Bar Code Centered
Incorrect
ar
Correct
Correct
Incorrect
in
Correct
PDF417 symbol
el
im
Figure 2-41 Imager Aiming Pattern: Bar Code Not Centered
Figure 2-42 Pick List Mode with Multiple Bar Codes in Aiming Pattern
4.
Release the scan button.
Imager decoding usually occurs instantaneously. The MC65 repeats the steps required to take a digital
picture (image) of a poor or difficult bar code as long as the scan button remains pressed.
Pr
NOTE
Digital Camera Scanning
1.
Ensure that a scan-enabled application is loaded on the MC65.
2.
Aim the camera lens on the back of the MC65 at a bar code.
3.
Press and hold the scan button. A preview window appears on the display window with a red aiming reticle in
the center. The Scan/Decode LED lights red to indicate that scanning is in process.
Figure 2-43 Sample Scan Application with Preview Window
ar
Using the MC65 2 - 43
Move the MC65 until the red aiming reticle is over the bar code to scan.
5.
The Scan/Decode LED lights green and a beep sounds, by default, to indicate the bar code was decoded
successfully.
The camera decode feature is set by default to automatically decode the bar code when read. This feature can
be programmed to display a green aiming rectile upon good decode indicating that the bar code has been
successfully decoded and to release the scan button.
el
im
NOTE
in
4.
Using Voice-Over-IP
The MC65 supports Voice over IP over WLAN (VoWLAN) using Motorola or third party voice clients. The MC65 can
communicate using VoIP either using the MC65 supports several audio outputs, including back speaker phone,
front receiver or handset, and Bluetooth headset.
It is recommended that the wireless network use the 802.11a (5 GHz) band for voice applications. Using the 5 GHz
band avoids some noise sources that may occur on the 802.11b/g (2.4 GHz) band due to wireless interference.
Pr
When using a Bluetooth headset with the MC65 and VoWLAN, it is required to use the Bluetooth Headset profile
instead of Hands-free profile. Use the buttons on the MC65 to answer and end calls. See Chapter 5, Using
Bluetooth for information on setting up a Bluetooth Headset Profile.
Taking Photos
To take a photo:
1.
Tap Start > Programs > Pictures & Videos icon.
2.
Tap Camera on the command bar.
3.
Check the image on the view finder, adjust if necessary.
4.
Press the Enter key to take the picture. Hold the MC65 still until the shutter sound is heard.
2 - 44 MC65 User Guide
Recording Video
To record a video clip:
1.
Tap Start > Programs > Pictures & Videos icon.
2.
Tap Camera on the command bar.
3.
Tap Menu > Video to set shooting mode to video.
NOTE
4.
ar
The available recording time displays on the screen.
By default, the time limit for recording videos is set to 30 seconds.
Press the Enter key to begin recording.
Viewing Photos and Videos
To view photos and video clips:
in
Recording stops when you press the Enter button again.
Tap Start > Programs > Pictures & Videos icon.
2.
Tap the picture or video clip to view.
Pr
el
im
1.
ar
Chapter 3 Using GPS Navigation
in
Introduction
el
im
The MC65 includes Global Positioning System (GPS) technology using the SiRF III chipset. GPS technology is
based on a worldwide system of GPS satellites orbiting the earth that continuously transmit digital radio signals.
These radio signals contain data on the satellites’ locations and their exact clock time and are used to determine
your location on the earth.
WARNING!
When using the MC65 in a vehicle, it is the user’s responsibility to place, secure and use in a
manner that will not cause accidents, personal injury or property damage or obstruct their view. It
is the responsibility of the driver to operate the vehicle in a safe manner, maintain observation of
all driving conditions at all times, and not become distracted by the device to the exclusion of safe
driving practices. It is unsafe to operate the controls of the device while driving.
Software Installation
Pr
Third-party GPS navigation software is required. Evaluation software is available from various suppliers. For
example; VisualGPS, visit: http://www.visualgps.net/VisualGPSce/
If interested in purchasing GPS navigation software check with the GPS software vendor (before purchasing,
downloading, or installing any software) to determine that the application is compatible with the MC65. Refer to the
application’s user guide for application installation and setup information.
MC65 GPS Setup
The GPS-enabled MC65 uses Microsoft Windows Mobile 6.1, so the operating system automatically manages
access to the GPS receiver to allow multiple programs to simultaneously access GPS data.
By default, the MC65 has the following settings:MC65:
1.
Tap Start > Settings > System > External GPS icon.
2.
In the Programs tab, the GPS program port is set to None.
3.
In the Hardware tab, the GPS hardware port is set to COM8.
3-2
MC65 User Guide
4.
Select 57600 from the Baud rate drop-down list.
5.
Tap ok to close the Setting window.
NOTE
If an application error message appears indicating that the COM port cannot be opened, ensure that a free COM
port is selected in the GPS hardware port drop-down list.
Operation
When using a GPS navigation application, ensure that the MC65 does not go into suspend mode. If the MC65
suspends then the power to the GPS radio is removed. Upon resume the GPS receiver must reacquire a valid GPS
signal, resulting in a a delay of positional information.
GPS Maps on microSD Cards
in
NOTE
ar
Acquiring satellite signals may take a few minutes. It is best to be outside and have a clear, unobstructed view of
the sky. Without a clear view, acquisition takes much longer and could result in the MC65 being unable to compute
the initial position quickly. When operating the device indoors access to the GPS signals may be limited or
unavailable.
GPS navigation software vendors may sell maps on microSD cards. If using a microSD card with the GPS
navigation software install the microSD memory card using procedure in Installing a microSD Card on page 1-4.
el
im
Answering a Phone Call While Using GPS
If you receive a phone call while using your GPS navigation software:
1.
Answer the phone call by pressing the Answer button.
2.
Once you end the phone call, press the End Call button to resume the audio on the GPS software.
NOTE
Anytime you are using GPS on the MC65 and you receive a phone call, the audio on the GPS navigation software
is muted until you finish the call.
Pr
Losing the GPS Signal While in a Vehicle
GPS performance on the MC65 may be affected if the vehicle has thermal glass windows and windshields, which
can block the MC65 from receiving a GPS signal from satellites. To improve GPS signal strength, place the MC65
where there is a clear view of the sky. A direct line of sight is required between the MC65 and the GPS satellites to
access information from the satellites.
Assisted GPS
GPS can be used in stand-alone or Assisted GPS (aGPS) modes. A Stand-alone GPS receiver downloads data
directly from GPS satellites. In challenging environments, such as urban canyons and areas where foliage is very
dense, aGPS can be used to improve Time To First Fix (TTTF). By default the MC65 uses the SUPL protocol which
requires the use of third party database/service from a carrier. By using GPS Location servers, A-GPS dramatically
improves the performance of the TTFF of GPS receivers by providing them with data that they would ordinarily
have to download from the GPS satellites. With the aGPS data, GPS receivers can operate faster and more
reliably.
Refer to the EMDK Help file for information on setting up SUPL on the MC65.
ar
Chapter 4 Using the Phone
NOTE
in
Introduction
Use this chapter if your MC65 is configured with the Window Mobile dialer.
el
im
Use the MC65 to make phone calls, set up speed dials, keep track of calls, and send text messages. Your wireless
service provider may also provide other services such as voice mail, call forwarding, and caller ID.
Also use the integrated phone to connect to an ISP or work network in order to browse the Web and read e-mail.
Connect to the Internet or work network over High-Speed Downlink Packet Access (HSDPA) or Evolution
Data-Optimized (EvDO) using Cellular Line.
Making a Call
You can make emergency calls even when the MC65 is locked or when a SIM card is not installed. See
Emergency Calling on page 4-5 for more information.
Pr
NOTE
With the MC65, you can make a call from the phone, contacts, speed dial and call history.
Using the Phone Keypad
To make a call using the phone keypad:
1.
Press the green Call key.
2.
From the Phone keypad, tap the number to call. The number appears in the call line.
3.
Tap the green Call key.
4.
Press the red End Call key to stop dialing or end the call.
NOTE
If you tap a wrong number, tap Delete key to erase each subsequent digit of a number. To erase the entire
number, tap and hold the Delete key.
4-2
MC65 User Guide
Smart Dialing
Smart Dialing makes it easy to dial a phone number. When you start entering numbers or characters, Smart Dialing
automatically searches and sorts the contact entries on the SIM card, in Contacts, and the phone numbers in Call
History (including incoming, outgoing, and missed calls). You can then select the desired number or contact from
the filtered list to dial.
Open the Phone screen, then tap the keys on the Phone keypad that correspond to the phone number or contact to
call. The contact panel lists contacts that match the sequence that you entered.
ar
Smart Dialing starts looking for numbers or contacts that match the sequence entered.
To find a phone number:
• Enter the first one or two digits to find a phone number in Call History.
• Enter the first three digits or more to find a phone number from the saved Contacts and SIM card.
To find a contact name:
in
• Enter the first letter of a contact’s first name or last name. Smart Dialing searches for the letter starting
from the first character of a contact name as well as from the character that appears after a space, dash,
or underscore in a contact name. For example, if you tap number “2” which is associated with [a, b, c] on
the Phone keypad, contact names such as the following will be considered matches: “Smith, Bernard”,
“Adams, John”, “Carlson, Eileen”, “Dillon, Albert”, “Childs, Larry”, “Cooper, Robert” and “Parks, Celine”.
Pr
el
im
• If the matching list is long narrow down the search further by entering another letter. Using the same
example above, tap “3” which is associated with (d, e, f), the matching list is narrowed down to the
following names: “Smith, Bernard”, “Adams, John”, and “Parks, Celine”.
Figure 4-1 Finding a Contact
To make a call or send a text message using Smart Dialing:
1.
Begin entering the first few numbers or characters.
2.
In the Smart Dialing panel, use the up and down arrows on the keypad to navigate to the desired contact or
phone number.
3.
When the correct contact is selected, press TALK to make a voice call.
4.
To send a text message to the selected contact, tap Menu > Send Text Message.
5.
To call a different phone number associated with the selected contact, tap the contact name and select the
phone number to call.
Using the Phone
4-3
Using Contacts
Use Contacts to make a call without looking up or entering the phone number.
To make a call from Contacts:
Tap
> Contacts.
2.
From the contact list, tap and hold the contact name.
3.
el
im
Figure 4-2 Contacts Menu
in
ar
1.
Tap Call Work, Call Home or Call Mobile.
NOTE
To make a call from an open contact, tap the number to call. See On-Device Help for more information about
Contacts.
Using Call History
To make a call using Call History:
Tap
> Phone or press the green phone key on the MC65’s keypad.
2.
From the Phone keypad, tap Call History.
Pr
1.
Phone icon
Figure 4-3 Call History Window
3.
Tap the phone icon next to the number to begin dialing and return to the phone keypad.
4-4
MC65 User Guide
4.
Tap End or press the red phone key on the MC65 keypad to stop dialing or end the call.
Making a Speed Dial Call
Use Speed Dial to call someone saved in the speed dial directory.
To make a speed dial call:
Tap
> Phone or press the green key.
2.
From the Phone keypad, tap and hold the speed dial location number assigned to a contact. (To dial a one-digit
speed dial location number, tap and hold the speed dial number. To dial a two-digit speed dial location number,
tap the first digit and then tap and hold the second digit.)
ar
1.
or
From the Phone keypad, tap Speed Dial and tap the speed dial location number of the desired contact in the
list.
el
im
in
Speed Dial
Location Number
Figure 4-4 Speed Dial Contact List
3.
To stop dialing or end the call, tap End or press the red key.
Answering a Call
A dialog box appears on the MC65 when it receives an incoming call. If the phone is set to ring, a ring tone sounds.
Answer or ignore the incoming call.
Pr
To answer an incoming call tap Answer on the dialog box or press the green key.
Figure 4-5 Incoming Call
To ignore the incoming call tap Send to voicemail. This sends the caller to voice mail, depending on the service
provider. Otherwise, this presents Busy to the calling party.
Using the Phone
4-5
To end the call tap End or press the red key.
Incoming Call Features
• If you receive a call while in a call, tap Wait to place the call in call waiting.
• You can use other programs on the MC65 during a call. To switch back to the Phone, tap Talk or tap
Phone. Tap End to end the call.
• If a caller isn't in your contact list, create a contact during the call or from Call History by tapping Menu >
ar
Save to Contacts.
• To terminate a call when a second call comes in and answer the waiting call, tap End on the Phone keypad to
disconnect the active call, then tap Answer or press the Send key to answer the waiting call.
• To hold the current call and answer a waiting call, tap Answer or press the Send key to place the current call
on hold and answer the incoming call.
• To put a call on hold to call another number or answer an incoming call, tap Hold. To move from one call to
Missed Call Notification
in
another, tap Swap.
el
im
When you do not answer an incoming call, the Home screen displays a Missed Call indication.
To display a missed call entry tap the Missed Call box on the Home screen.
Emergency Calling
Your service provider programs one or more emergency phone numbers, such as 911 or 999, that you can call
under any circumstances, even when your phone is locked or the SIM card is not inserted. Your service provider
can program additional emergency numbers into your SIM card. However, your SIM card must be inserted in your
phone in order to use the numbers stored on it. See your service provider for additional information.
Pr
When the alpha primary keypad is locked, press the Orange key twice to set the keypad to numeric mode and then
enter the emergency number.
NOTE
Emergency numbers vary by country. Your phone’s pre-programmed emergency number(s) may not work in
all locations, and sometimes an emergency call cannot be placed due to network, environmental, or
interference issues.
Audio Modes ????
The MC65 offers three audio modes for use during phone calls:
• Handset Mode: Switches audio to the speaker at the top front of the MC65, so you can use the MC65 as a
handset. This is the default mode.
• Speaker Mode: Use the MC65 as if on speaker phone. Tap the Speaker On button to activate this mode.
Tap the Speaker Off button to switch back to handset mode.
4-6
MC65 User Guide
• Headset Mode: Connect a Bluetooth headset or a wired headset to automatically switch audio to the
headset.
The MC65 defaults to handset mode. When a wired headset is plugged into the MC65 headset connector or a
Bluetooth headset is configured for use with the MC65, the earpiece and speakerphone are muted and audio is
heard through the headset.
NOTE
While using a Bluetooth headset during a call, the MC65 will not go into suspend mode.
NOTE
ar
Using a Wired Headset
Remove the headset jack plug before connecting the Headset Adapter to the MC65.
Pr
el
im
in
You can use a stereo headset for audio communication when using an audio-enabled application. To use a
headset, plug the headset jack of the Headset Adapter Cable into the headset connector on the side of the MC65.
Plug the Headset connector into the connector on the Headset Adapter Cable. Set the MC65’s volume
appropriately before putting the headset on. Plugging a headset into the jack mutes the speaker.
Breakaway
Connectors
Headset Adapter
Cable
Headset
Connector
Figure 4-6 Using a Headset
Using a Bluetooth Headset
You can use a Bluetooth headset for audio communication when using an audio-enabled application. See Chapter
7, Using Bluetooth for information on connecting a Bluetooth headset to the MC65. Set the MC65’s volume
appropriately before putting the headset on. When a Bluetooth headset is connected the speakerphone is muted.
It is recommended for phone conversations to use the Bluetooth Hands-free profile instead of the Headset profile.
See Chapter 7, Using Bluetooth for more information.
?????? Does the Bluetooth icon appear ???????
Using the Phone
4-7
Adjusting Audio Volume
Use the Volume Control Slider or the keypad keys to adjust the volume of the ringer when not in a call and the
audio volume when in a call.
ar
Phone Volume Slider
in
Figure 4-7 Phone Volume Slider
To adjust the volume tap the Speaker icon in the Title bar. Move the slider up or down to adjust the volume.
Muting a Call
Adjust the conversation phone volume during a call. Adjusting the volume while not in a call affects the ring
and notification sound levels.
el
im
NOTE
During a call, you can mute the microphone so you can hear the person on the line but he or she cannot hear
conversation from the microphone. This is useful when there is conversation or background noise on your end.
To mute or unmute a call:
During a call, tap Mute on the dialer to mute the audio. The Mute button become Unmute.
Pr
1.
Figure 4-8 Unmute Key
4-8
MC65 User Guide
Using Call History
Use Call History to call someone who was recently called, or recently called in. Call History provides the time and
duration of all incoming, outgoing, and missed calls. It also provides a summary of total calls and easy access to
notes taken during a call. Table 4-1 lists the call history icons that appear in the Call History window.
Table 4-1 Call History Icons
Description
ar
Icon
This icon appears next to the contact information for all outgoing calls.
This icon appears next to the contact information for all incoming calls.
This icon appears next to the contact information for all missed calls.
in
Managing Call History
Change views, reset the call timer, and delete calls to manage the calls stored in Call History.
Changing the Call History View
Tap
> Phone or press the green phone key to display the Phone keypad.
2.
From the Phone keypad, tap Call History.
3.
Tap Menu > Filter to show the menu.
Pr
el
im
1.
Figure 4-9 Call History - All Calls/Show Menu
4.
Select a view type from the menu to display only missed calls, outgoing calls, incoming calls, or calls listed
alphabetically by caller name.
5.
Tap
to exit the Call History window.
Resetting the Recent Calls Counter
1.
Tap
> Phone or press the green phone key to display the Phone keypad.
2.
From the Phone keypad, tap Call History.
3.
Tap Menu.
ar
Using the Phone
Figure 4-10 Call History - Tools Menu
Select Call Timers... .
el
im
in
4.
Figure 4-11 Call History - Call Timers
Tap Reset. (The All Calls: counter cannot be reset.)
6.
Tap
Pr
5.
to exit the Call Timers window.
Deleting All Call History Items
1.
Tap
> Phone or press the green key to display the Phone keypad.
2.
From the Phone keypad, tap Call History.
3.
Tap Menu.
4-9
ar
4 - 10 MC65 User Guide
Figure 4-12 Call History - Tools Menu
Select Delete all calls.
Figure 4-13 Call History - Delete All Dialog
Tap Yes.
6.
Tap ok to exit the Call History window.
el
im
5.
in
4.
Viewing Call Status
Tap
> Phone or press the green key to display the Phone keypad.
2.
From the Phone keypad, tap Call History.
3.
Tap an entry. The Call Status window appears.
Pr
1.
Figure 4-14 Call History - Detail
NOTE
When more than one call is on the phone line, only the duration of the first call is recorded.
Using the Phone 4 - 11
4.
Tap ok and then ok to exit.
Using the Call History Menu
Use the Call History menu to dial voice mail, access the Activation Wizard, save to contacts, view a note, delete a
listing, send an SMS, and make a call.
> Phone or press the green key to display the Phone keypad.
2.
From the Phone keypad, tap Call History.
3.
Tap and hold an item in the list.
ar
Tap
el
im
in
1.
Figure 4-15 Call History - Menu
4.
Select an applicable item from the menu, as needed.
5.
Depending on the item selected, the appropriate window displays. For example, select Send Text message to
display the Text Messages window.
6.
Tap ok to exit the Call History window.
Pr
Swapping Calls on GSM
To move between two phone calls:
1.
Tap
> Phone or press the green phone key on the MC65’s keypad to display the Phone keypad.
2.
Enter the first phone number and press Talk. When the call connects, Hold appears on the keypad.
Figure 4-16 Call Swapping - Hold
Tap Hold on to place the first number on hold.
4.
Enter the second number and tap Talk.
el
im
in
3.
ar
4 - 12 MC65 User Guide
Figure 4-17 Call Conferencing - Conferencing
Tap Swap to move from one call to the other.
6.
Tap End or press the red phone key on the MC65 keypad to end each call.
Pr
5.
Swapping Calls on CDMA
To swap between two incoming phone calls:
1.
Tap Answer to connect to the first call.
Figure 4-18 Answer a Call
ar
Using the Phone 4 - 13
When a second call arrives, tap Answer. The first call is placed on hold.
3.
Tap Talk to swap from one call to the other.
el
im
in
2.
Figure 4-19 Call Swapping
Tap End or press the red phone key on the MC65 keypad to end active call. The remaining call re-connects,
tap Answer to connect to the call.
Pr
4.
5.
Tap End or press the red phone key on the MC65 keypad to end the last call.
Conference Calling on GSM
NOTE
Conference Calling and the number of conference calls allowed may not be available on all services. Please
check with your service provider for Conference Calling availability.
To create a conference phone session with multiple people:
1.
Tap
> Phone or press the green phone key on the MC65’s keypad to display the Phone keypad.
2.
Enter the first phone number and press Talk. When the call connects, Hold appears on the keypad.
Figure 4-20 Conference Call - Hold
ar
4 - 14 MC65 User Guide
Tap Hold to place the first call on hold.
4.
Enter the second phone number and tap Talk.
5.
After the call is answered, tap Menu > Conference to place the calls in conference mode.
el
im
in
3.
Figure 4-21 Creating a Conference Call
Tap Hold to place the conference on hold.
7.
Enter another phone number and tap Talk.
8.
After the call is answered, tap Menu > Conference to place all the calls in conference mode.
9.
Repeat steps 6 through 8 for up to six phone numbers.
Pr
6.
10. Tap End or press the red phone key on the MC65 keypad to end the conference call.
NOTE
To speak privately with one party during a conference call, tap Menu > Private. To include all parties again,
tap Menu > Conference.
Using the Phone 4 - 15
Three-way Calling on CDMA
NOTE
Three-way Calling may not be available on all services. Please check with your service provider for availability.
To create a three-way phone session with two people and you as the initiator:
Tap
> Phone or press the green phone key on the MC65’s keypad to display the Phone keypad.
2.
Enter the first phone number and press Talk.
3.
To call a second person, tap Keypad. Enter the second number and tap Talk.
el
im
in
ar
1.
Figure 4-22 Calling Another Person
When the second person answers the call, tap Talk to create a three-way calling session.
5.
Tap Talk to drop the last call.
6.
Tap End to drop the first call.
Pr
4.
4 - 16 MC65 User Guide
Establishing a GSM Data Connection
NOTE
Refer to the MC65 Series Enterprise Smartphone Integrator Guide for information on configuring a data
connection.
7.
Ensure a SIM card is installed in the MC65.
8.
Configure a GPRS data connection. See MC65 Series Enterprise Smartphone Integrator Guide.
9.
Tap the connectivity icon
or
at the top of the screen.
el
im
in
ar
Figure 4-23 Connectivity Dialog Box
10. Tap Settings.
11. Tap Connections icon.
12. Tap Managing existing connections.
Pr
13. Tap and hold on the data connection until a menu appears.
Figure 4-24 Data Connection
14. Select Connect.
ar
Using the Phone 4 - 17
Figure 4-25 Connecting Using GPRS
15. If the SIM card is protected with a Personal Identification Number (PIN), a dialog box pops up requesting the
appropriate PIN to unlock the SIM card. In this case, enter the PIN and tap ok.
Place emergency calls at any time, without entering a PIN or a SIM card.
in
NOTE
16. When a connection is established, launch Internet Explorer to browse the Internet or launch an applicable
el
im
application.
Ending a Data Connection
To cancel a data connection in progress, tap Cancel in the Connecting... dialog window.
To end an established data connection:
Tap
or
to display the Connectivity dialog box.
Pr
1.
Figure 4-26 Connectivity Dialog Box
2.
Tap Disconnect.
NOTE
Tapping Disconnect during an active data transfer (e.g., downloading a web page) automatically reconnects
the connection. You cannot disconnect the connection until the data transfer is complete.
4 - 18 MC65 User Guide
Establishing an CDMA Data Connection
NOTE
Ensure that you have data service activated with your service provider.
A data connection allows Internet access across a wireless network. Data connection is pre-packaged with service
accounts.
1.
Tap
> Internet Explorer.
2.
In the address bar, enter a URL for a web site.
3.
Tap
ar
To verify active data service:
el
im
in
to display the Connectivity dialog. The dialog box displays the data connection information.
Figure 4-27 Data Connection
Ending a Data Connection
To cancel a data connection in progress, tap Cancel in the Connecting... dialog window.
Pr
To end an established data connection:
1.
Tap
to display the Connectivity dialog box.
Figure 4-28 Connectivity Dialog Box
Using the Phone 4 - 19
2.
Tap Disconnect.
NOTE
Tapping Disconnect during an active data transfer (e.g., downloading a web page) automatically reconnects
the connection. You cannot disconnect the connection until the data transfer is complete.
Configuring a GSM Data Connection
A data connection allows Internet access across a wireless network.
To set up a new data connection:
Acquire an Access Point Name (APN) from the service provider.
2.
Tap
ar
1.
el
im
in
> Settings > Connections tab > Connections icon > Tasks tab.
Figure 4-29 Connections Window
Under My ISP select Add a new modem connection.
Pr
3.
Figure 4-30 Connections Window - Make New Connection
4.
Enter a connection name in the Enter a name for the connection: text box.
5.
Select Cellular Line (GPRS) from the Select a modem: drop-down list.
6.
Tap Next.
Figure 4-31 Connections Window - Access Point Name
ar
4 - 20 MC65 User Guide
Enter the APN from the service provider in the Access point name: text box.
8.
Tap Next.
el
im
in
7.
Figure 4-32 Connections Window - User Name & Password
9.
Enter a username in the User name text box, if required by the service provider.
Pr
10. Enter a password in the Password text box, if required by the service provider.
11. Enter a domain name in the Domain text box, if required by the service provider.
12. Tap Finish.
13. Tap ok to exit Connections.
Using the Phone 4 - 21
MC65 Settings
Use the Phone Settings window to customize settings, such as the ring type and ring tone for incoming calls,
security options, and other options depending on the type of service.
Phone
Use the Phone tab to customize ring type, ring tone, keypad tone.
> Settings > Personal tab > Phone icon > Phone tab
ar
Tap
or
el
im
in
> Phone > Menu > Options > Phone tab.
Figure 4-33 MC65 Phone Window - Phone Tab
Sounds
Phone Number automatically displays on the Phone tab when a live SIM card is installed.
2.
Select a ring type from the Ring type: drop-down list. The ring type changes the way the MC65 rings when you
receive an incoming call. Regardless of the ring type selected, a dialog box appears on the MC65’s display for
incoming calls.
Pr
1.
3.
Select a ring tone for incoming calls from the Ring tone: drop-down list. To hear a sample of the selected ring
tone, tap
NOTE
4.
. Tap
to end the ring tone.
To use custom .wav, .mid, or .wma files as ring tones, use ActiveSync on the host computer to copy the file to
the /Windows/Rings folder on the MC65. Then select the sound from the ring tone list.
Select a keypad tone from the Keypad: drop-down list. This selection determines the tone that sounds when
entering a phone number on the keypad.
Select Short tones or Long tones to specify the duration of the sound when you press a number on the keypad.
Select Off to disable tones.
NOTE
Turning off sounds saves power and prolongs battery life.
4 - 22 MC65 User Guide
Security
Enabling a PIN
Place emergency calls at any time, without requiring a PIN or a SIM card.
Figure 4-34 Security Tab
To require a PIN when using the phone:
el
im
From the Security tab (Figure 4-34), select the Require PIN when phone is used check box under Security.
Pr
1.
in
ar
NOTE
Figure 4-35 Enter PIN
2.
Use the touch keypad to enter a four to eight digit PIN.
3.
Tap Enter to enable the PIN and return to the Phone tab.
Changing a PIN
CAUTION
If you enter an incorrect PIN, the message “SIM PIN incorrect: Try again” appears. After three consecutive
incorrect attempts, the SIM card is blocked. The phone does not allow you to attempt to enter your PIN
again and you must obtain a PIN Unblock Key from your service provider.
1.
From the Security tab (Figure 4-34), tap Change PIN.
2.
Use the touch keypad to enter the current PIN.
Using the Phone 4 - 23
3.
Tap Enter.
4.
Use the touch keypad to enter a new four to eight digit PIN.
5.
Tap Enter.
6.
Reenter the new PIN for confirmation and tap Enter.
7.
Tap ok to confirm the change.
Disabling a PIN
From the Security tab (Figure 4-34), deselect the Require PIN when phone is used check box.
2.
Use the touch keypad to enter the current PIN.
3.
Tap Enter.
4.
Tap ok to confirm the change and exit settings.
in
Services
ar
1.
1.
Tap
or
el
im
Use the Services tab to configure settings for subscribed phone services. For example, block certain types of
incoming and/or outgoing calls ( page 4-23), disclose the caller’s identity when making outgoing calls ( page 4-24),
forward incoming calls to a different phone number ( page 4-24), receive notification of incoming calls when a
phone session is in use ( page 4-25), and set up voice mail and short message service ( page 4-25).
> Settings > Personal tab > Phone icon > Services tab.
Pr
> Phone > Menu > Options > Services tab.
Figure 4-36 MC65 Phone Window - Services Tab
2.
Select a service from the list and tap Get Settings... .
3.
Change services settings as follows.
Call Barring (Call Blocking)
Use call barring to block certain types of incoming and/or outgoing calls. Select the type of incoming and/or
outgoing calls to block.
ar
4 - 24 MC65 User Guide
Figure 4-37 Call Barring/Call Blocking
Caller ID
el
im
in
Enable caller ID to reveal the identity of the person making an outgoing call. Select the Everyone radio button to
always display the caller ID. Select the No one radio button to prevent the caller’s identity from appearing to others.
Pr
Figure 4-38 Caller ID
Call Forwarding
NOTE
Call Forwarding may not be available on all networks. Check with your service provider for availability.
Use call forwarding to forward incoming calls to a different phone number.
• To forward all calls to a different phone number:
• select the Forward all incoming phone calls check box.
• enter the phone number to receive forwarded calls in the To: text box.
Using the Phone 4 - 25
• To forward incoming calls to a different phone number based on a specific situation, select one or more of the
check boxes under Forward phone calls only if:.
• No answer: enter the phone number to receive forwarded calls only when the phone cannot be answered.
Then select a time period from the Forward after: drop-down list. Options are 5, 10, 15, 20, 25, and 30
seconds.
• Unavailable: enter the phone number to receive forwarded calls only when the phone is turned off or the
user is unreachable.
Call Waiting
NOTE
el
im
Figure 4-39 Call Forwarding
in
ar
• Busy: enter the phone number to receive forwarded calls only when the line is busy.
Call Waiting may not be available on all networks. Check with your service provider for availability.
Pr
Call waiting notifies you of an incoming call when the phone is in a phone session. Select the Notify me radio button
to enable call waiting. Select the Do not notify me radio button to disable call waiting.
Figure 4-40 Call Waiting
Voice Mail and Text Messages
To use voice mail and send short messages, enter the voice mail and/or text message phone number in the
appropriate text boxes.
ar
4 - 26 MC65 User Guide
Figure 4-41 Voice Mail and Text Messages
Fixed Dialing
Select Fixed Dialing and tap Get Settings.
el
im
1.
in
Use Fixed Dialing to restrict the phone to dial only the phone number(s) or area code(s) specified in a Fixed Dialing
list.
Pr
Figure 4-42 Fixed Dialing Window
2.
Select the Enable fixed dialing check box.
3.
To add a number to the list, tap Menu > Add.
4.
Enter the phone number or area code to restrict and tap Done.
5.
Repeat steps 3 and 4 to add more numbers, and tap Done twice when complete.
6.
Enter PIN2 and tap Done.
NOTE
PIN2 is buffered in the MC65 indefinitely after entry and will not be requested again until a warm boot of the
MC65 has been performed. Should PIN2 be required, then the user must perform a warm boot of the MC65.
Internet Calling
Using the Phone 4 - 27
Phone Network Setup
Activation Test
Approximately four hours after activation is completed, test the service.
Tap
> Phone.
el
im
Figure 4-43 Phone Window - Example
in
ar
1.
2.
Ensure the carrier name displays on the window.
3.
Make a voice call to ensure activation was successful.
If activation was not successful, contact the service provider.
Pr
NOTE
4 - 28 MC65 User Guide
NITZ
The ability to enable/disable network time synchronization provides the user flexibility on time zone changes.
If you enable network time synchronization, users can turn this feature on or turn it off and set up user notifications
for time changes.
This feature is inaccessible by the user.
> Settings > Clock & Alarms > Time Zone tab.
el
im
in
ar
Tap
Pr
Figure 4-44 Clock & Alarms - Time Zone Tab
ar
Chapter 5 Using Bluetooth
in
Introduction
el
im
Bluetooth-equipped devices can communicate without wires, using frequency-hopping spread spectrum (FHSS)
radio frequency (RF) to transmit and receive data in the 2.4 GHz Industry Scientific and Medical (ISM) band
(802.15.1). Bluetooth wireless technology is specifically designed for short-range (30 feet/10 meters)
communication and low power consumption.
MC65s with Bluetooth capabilities can exchange information (e.g., files, appointments, and tasks) with other
Bluetooth enabled devices such as phones, printers, access points, and other mobile computers. To use the MC65
as a modem, create a dial-up modem connection between a computer and MC65.
Adaptive Frequency Hopping
MC65
Pr
Adaptive Frequency Hopping (AFH) is a method of avoiding fixed frequency interferers, and can be used with
Bluetooth voice. All devices in the piconet (Bluetooth network) must be AFH-capable in order for AFH to work.
There is no AFH when connecting and discovering devices. Avoid making Bluetooth connections and discoveries
during critical 802.11b communications. AFH for Bluetooth consists of four main sections:
• Channel Classification - A method of detecting an interference on a channel-by-channel basis, or pre-defined
channel mask.
• Link Management - Coordinates and distributes the AFH information to the rest of the Bluetooth network.
• Hop Sequence Modification - Avoids interference by selectively reducing the number of hopping channels.
• Channel Maintenance - A method for periodically re-evaluating the channels.
When AFH is enabled, the Bluetooth radio “hops around” (instead of through) the 802.11b high-rate channels. AFH
coexistence allows Motorola mobile computers to operate in any infrastructure.
The Bluetooth radio in this MC65 operates as a Class 2 device power class. The maximum output power is 2.5mW
and the expected range is 32.8 feet (10 meters). A definition of ranges based on power class is difficult to obtain
due to power and device differences, and whether one measures open space or closed office space.
NOTE
It is not recommended to perform Bluetooth wireless technology inquiry when high rate 802.11b operation is
required.
5-2
MC65 User Guide
Security
The current Bluetooth specification defines security at the link level. Application-level security is not specified. This
allows application developers to define security mechanisms tailored to their specific need. Link-level security
occurs between devices, not users, while application-level security can be implemented on a per-user basis. The
Bluetooth specification defines security algorithms and procedures needed to authenticate devices, and if needed,
encrypt the data flowing on the link between the devices. Device authentication is a mandatory feature of Bluetooth
while link encryption is optional.
ar
Pairing of Bluetooth devices is accomplished by creating an initialization key that is used to authenticate the
devices and create a link key for them. Entering a common PIN number in the devices being paired generates the
initialization key. The PIN number is never sent over the air. By default, the Bluetooth stack responds with no key
when a key is requested (it is up to user to respond to the key request event). Authentication of Bluetooth devices
is based-upon a challenge-response transaction. Bluetooth allows for a PIN number or passkey that is used to
create other 128-bit keys used for security and encryption. The encryption key is derived from the link key used to
authenticate the pairing devices. Also worthy of note is the limited range and fast frequency hopping of the
Bluetooth radios that makes long-distance eavesdropping difficult.
• Perform pairing in a secure environment
in
Recommendations are:
• Keep PIN codes private and don't store the PIN codes in the mobile computer
el
im
• Implement application-level security.
Pr
The Microsoft stack supports Smart-pairing. For detailed information, refer to the Microsoft MSDN.
Using Bluetooth
5-3
Bluetooth Configuration
MC65MC65MC65The services supported by the Microsoft Bluetooth stack.
• OBEX Object Push Services
• Hands-Free Audio Gateway Services
• Serial Port Services
• PBAP Services
The COM ports available for the Microsoft Bluetooth stack.
• COM5
Bluetooth Power States
Cold Boot
in
• COM9
ar
• Personal Area Networking Services
Warm Boot
el
im
Performing a cold boot on the MC65 turns off Bluetooth after initialization (which takes a few moments). It is normal
to see the Bluetooth icon appear and disappear, as well as a wait cursor, when initialization proceeds in all modes.
Performing a warm boot on the MC65 turns off Bluetooth.
Suspend
Suspending the MC65 turns off Bluetooth.
If there is an active Bluetooth connection between the MC65 and another Bluetooth device, the MC65 will not
timeout. However, if the user presses the Power button on the MC65, the MC65 will suspend and upon
receiving data from a remote Bluetooth device, the MC65 will wake from suspend mode. For example,
headset redial or Bluetooth scanner sending data to the MC65.
Pr
NOTE
Resume
When the MC65 resumes, Bluetooth turns on if it was on prior to suspend.
5-4
MC65 User Guide
Using Microsoft Bluetooth Stack
Table 5-1 Miscellaneous tab Data
Item
Description
Select the connection type to highlight when connected. In the Wizard Mode,
the only options are Favorites or None. In the Explorer Mode the options are
None, Tree View Only, List View Only, or Tree and List View.
Apply Text Style
Select the text style to apply to the connection text.
Apply Text Color
Select the text color to apply to the connection text.
ar
Highlight Connections
The following sections provide information on using the Microsoft Bluetooth stack.
Turning the Bluetooth Radio Mode On and Off
To achieve the best battery life turn off radios not in use.
el
im
NOTE
in
Turn off the Bluetooth radio to save power or if entering an area with radio restrictions (e.g., an airplane). When the
radio is off, other Bluetooth devices cannot see or connect to the MC65. Turn on the Bluetooth radio to exchange
information with other Bluetooth devices (within range). Communicate only with Bluetooth radios in close proximity.
Enabling Bluetooth
To enable Bluetooth:
1.
Tap Wireless Manager and then tap the Bluetooth bar or
Pr
Tap Start > Setting > Connections > Bluetooth icon > Mode tab.
Figure 5-1 Bluetooth Mode Tab
2.
Check the Turn On Bluetooth checkbox.
3.
Tap ok.
Disabling Bluetooth
To disable Bluetooth:
Using Bluetooth
1.
5-5
Tap Wireless Manager and then tap the Bluetooth bar or
Tap Start > Setting > Connections > Bluetooth icon > Mode tab.
2.
Un-check the Turn On Bluetooth checkbox.
3.
Tap ok.
Discovering Bluetooth Device(s)
To find Bluetooth devices in the area:
ar
The MC65 can receive information from discovered devices without bonding. However, once bonded, the MC65
and a bonded device exchange information automatically when you turn the Bluetooth radio on.
Ensure that Bluetooth is enabled on both devices.
2.
Ensure that the Bluetooth device to discover is in discoverable and connectable modes.
3.
Ensure that the two devices are within 30 feet (10 meters) of one another.
4.
Tap Start > Settings > Connections tab > Bluetooth icon > Devices tab.
el
im
in
1.
Figure 5-2 Bluetooth - Devices Tab
Tap Add new device. The MC65 begins searching for discoverable Bluetooth devices in the area.
Pr
5.
Figure 5-3 Searching for Bluetooth Devices
6.
Select a device from the list.
Figure 5-4 Select a Bluetooth Device
7.
Tap Next. The Enter Passcode window appears.
If Smart-pairing is configured and the device is requesting one of the pre-defined PINs, the Enter
Passcode window does not appear.
el
im
in
NOTE
ar
MC65 User Guide
Figure 5-5 Enter Passcode
Pr
5-6
8.
Enter the Passcode on the other device. The device is added to the Bluetooth list.
5-7
ar
Using Bluetooth
Figure 5-6 Bluetooth Connection Confirmation
You are prompted to enter a passcode. If the device has a specific passcode, enter it in the Passcode field and
tap Next. If the device does not have a specific passcode, enter one in the Passcode field and tap Next. The
Bluetooth radio tries to connect with the device.
If you created a passcode, you will be prompted by the other device to enter the same passcode. Enter the
created passcode to establish a paired connection. (If you entered a passcode from the device, you shouldn’t
have to do anything on the other device.)
in
9.
el
im
10. When the connection is complete, a list of matching and supported services on the device appears.
11. Select the services you want to use and tap Finish. The services on the new devices have to be selected or
else the pairing won’t include those services, even though the devices are paired. If services are not selected,
you will be continually reprompted for the passcode from the device.
12. The device appears in the list on the main window.
After the passcodes have been accepted on both sides, you have a trusted (“paired”) connection.
Available Services
Some devices might not require a PIN. This depends upon the device’s authentication.
Pr
NOTE
The MC65 with Microsoft Bluetooth stack offers the following services:
• OBEX Object Push Services via Beam
• Hands-Free Audio Gateway Services
• Serial Port Services
• Personal Area Networking Services
• PBAP Services.
See the following sections for information on these services.
Object Push Services via Beam
NOTE
You can only send files to a remote device using the Beam function.
MC65 User Guide
Use the OBEX Push Service to send files and contacts to another Bluetooth device. To transfer files between the
MC65 and another Bluetooth enabled device:
Ensure that Bluetooth is enabled and discoverable on both devices.
2.
Ensure that the two devices are within 30 feet (10 meters) of one another.
3.
Tap Start > Programs > File Explorer.
4.
Navigate to the file to transfer.
5.
Tap and hold on the filename until the pop-up menu appears.
el
im
Figure 5-7 File Explorer Window
in
ar
1.
6.
Select Beam File. The MC65 searches for Bluetooth devices in the area.
7.
Tap Tap to send next to the Bluetooth device to send the file to. The MC65 communicates with the device and
send the file. When completed, Tap to send changes to Done.
Pr
5-8
Figure 5-8 Beam File Window
To transfer a contact between the MC65 and another Bluetooth enabled device:
1.
Ensure that Bluetooth is enabled and discoverable on both devices.
2.
Ensure that the two devices are within 30 feet (10 meters) of one another.
3.
Tap Start > Contacts
4.
Navigate to the contact to transfer.
Using Bluetooth
Tap and hold on the contact until the pop-up menu appears.
ar
5.
5-9
Figure 5-9 Contact Window
Select Send Contact > Beam. The MC65 searches for Bluetooth devices in the area.
7.
Tap Tap to send next to the Bluetooth device to send the file to. The MC65 communicates with the device and
send the contact. When completed, Tap to send changes to Done.
Internet Sharing
in
6.
el
im
Internet Sharing allows the user to connect a computer or laptop to the MC65 and use the MC65 as a modem to
connect to an office network or ISP.
To use MC65 as a modem using Bluetooth:
Ensure that the device is not connected to the computer or laptop.
2.
On the MC65, ensure that the Phone is on and a data connection is configured.
3.
Tap > Programs > Internet Sharing.
4.
In the PC Connection list, select Bluetooth PAN.
5.
In the Network Connection list, select the connection type.
Pr
1.
Select the network connection that the device should use to connect to the Internet.
6.
Tap Connect.
7.
On the computer or laptop, setup a Bluetooth PAN with your device.
a.
Select Start > Control Panel > Network Connections.
b.
Under Personal Area Network, select Bluetooth Network Connection.
c.
Right-click on Bluetooth Network Connection and select View Bluetooth network devices.
d.
In the Bluetooth Personal Area Network Devices window select your device.
e.
Click Connect. The computer connects to the device via Bluetooth.
NOTE
8.
If your computer is Bluetooth-enabled and you select Bluetooth as the PC connection, you must initiate and
complete the Bluetooth PAN partnership before Internet Sharing will work. For more information, refer to
Windows Help and Support.
To verify, on the PC or laptop, launch Internet Explorer and open a web site.
5 - 10 MC65 User Guide
9.
To end dial-up networking, on the MC65 tap Disconnect.
Hands-free Services
To connect to a Bluetooth headset:
NOTE
Newer Bluetooth headsets are device dependant and remember the last device they connected to. If problems
occur while connecting to the headset, place the headset in discovery mode. Refer to the headset user manual
for more information.
ar
Only WAN audio is routed to the headset. System audio is still emitted through the MC65 speaker.
You can accept calls and re-dial using the Hands-free profile.
Hands-free profile does not support 3-way calling.
Ensure that Bluetooth is enabled and discoverable on both devices.
2.
Ensure that the two devices are within 30 feet (10 meters) of one another.
3.
Tap Start > Settings > Connections > Bluetooth icon.
4.
Tap New device. The MC65 searches for Bluetooth devices in the area.
5.
Select the headset name and tap Next. The Passcode window appears.
6.
Enter the headset’s passcode.
7.
Tap Next. The MC65 connects to the headset. Refer to the headset user manual for instructions on
communicating with a Bluetooth device.
el
im
NOTE
in
1.
During an active connection, the MC65 cannot go into suspend mode when the Power Button is pressed.
A message appears notifying the user.
Once the WAN call is disconnected (with Hands-free profile) the Power button is enabled.
Pr
Headset icon
Figure 5-10 WWAN Bluetooth Audio Notification Dialog Box
Serial Port Services
Use the wireless Bluetooth serial port connection as you would a physical serial cable connection. Configure the
application that will use the connection to the correct serial port.
To establish a serial port connection:
Using Bluetooth 5 - 11
1.
Ensure that Bluetooth is enabled and discoverable on both devices.
2.
Ensure that the two devices are within 30 feet (10 meters) of one another.
3.
Tap Start > Settings > Connections tab > Bluetooth icon > Devices tab.
4.
Tap Add new device. The MC65 begins searching for discoverable Bluetooth devices in the area.
5.
Select a device from the list.
6.
Tap Next. The Enter Passcode window appears.
If Smart-pairing is configured and the device is requesting one of the pre-defined PINs, the Enter
Passcode window does not appear.
ar
NOTE
7.
Enter the Passcode and the tap Next. The device is added to the Bluetooth list.
8.
In the device list, tap the serial device. The Partnership Settings window displays.
9.
Select the Serial Port checkbox.
11. Tap COM Ports tab.
in
10. Tap Save.
12. Tap New Outgoing Port. The add device window appears.
el
im
13. Select the serial device in the list and then tap Next.
14. Select a COM port from the drop-down list.
15. Tap Finish.
NOTE
No connection is made at this point. An application must open the selected COM port to trigger Microsoft
Bluetooth stack to open the connection.
ActiveSync Using Serial Port Services
Use the wireless Bluetooth serial port connection for ActiveSync just as you would a physical serial cable
connection. You must configure the application that will use the connection to the correct serial port.
Pr
To set up a Bluetooth ActiveSync connection:
Before setting up a Bluetooth ActiveSync connection, configure the Bluetooth function of your device.
NOTE
For additional security, disable network bridging on the computer (specifically, bridging to a Remote NDIS
adapter) before connecting to the computer to pass though to the Internet or a network. For more information
on network bridging, see Windows Help on your computer.
The instructions below are for computers that support the Windows XP SP2 or later version operating system.
1.
Ensure that Bluetooth is enabled and discoverable on both devices.
2.
Ensure that the two devices are within 30 feet (10 meters) of one another.
3.
On the computer, click Start > Settings > Control Panel.
4.
Double-click Bluetooth Devices.
5.
On the Options tab, select the Turn discovery on and Allow Bluetooth devices to connect to this
computer checkboxes.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Author                          : Motorola, Inc.
Create Date                     : 2010:03:04 20:15:14+08:00
Modify Date                     : 2010:03:08 20:39:49+08:00
Subject                         : MC55
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2010:03:08 20:39:49+08:00
Creator Tool                    : FrameMaker 8.0
Format                          : application/pdf
Title                           : MC55 User Guide (P/N 72E-108859-02 Rev. A)
Description                     : MC55
Creator                         : Motorola, Inc.
Document ID                     : uuid:015648a5-7b5a-4b39-a112-88493a4bcc99
Instance ID                     : uuid:fcbe9fbe-5095-4490-abeb-8c00c5c8f6fe
Producer                        : Acrobat Distiller 9.3.0 (Windows)
Page Count                      : 61

EXIF Metadata provided by EXIF.tools