Zebra Technologies MC659B ENTERPRISE DIGITAL ASSISTANT (EDA) User Manual MC55 User Guide P N 72E 108859 02 Rev A

Zebra Technologies Corporation ENTERPRISE DIGITAL ASSISTANT (EDA) MC55 User Guide P N 72E 108859 02 Rev A

UserManual.wiki >

Zebra Technologies >

MC659B User Manual >

Users Manual 1 HTML Version

Users Manual 1

MC65 Enterprise Digital Assistant

User Guide

Preliminary

MC65 Enterprise Digital Assistant

User Guide

72E-133769-01-

Rev. 1

March 2010

Preliminary

ii MC65 User Guide

No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means,

without permission in writing from Motorola. This includes electronic or mechanical means, such as

photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to

change without notice.

The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on

a licensed basis. Motorola grants to the user a non-transferable and non-exclusive license to use each

software or firmware program delivered hereunder (licensed program). Except as noted below, such license

may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of

Motorola. No right to copy a licensed program in whole or in part is granted, except as permitted under

other program material, create a derivative work from a licensed program, or use a licensed program in a

network without written permission from Motorola. The user agrees to maintain Motorola’s copyright notice on

the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in

whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed

program delivered to the user or any portion thereof.

Motorola reserves the right to make changes to any software or product to improve reliability, function, or

design.

Motorola does not assume any product liability arising out of, or in connection with, the application or use of

any product, circuit, or application described herein.

No license is granted, either expressly or by implication, estoppel, or otherwise under any Motorola, Inc.,

intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in

Motorola products.

MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the US Patent &

Trademark Office. Bluetooth is a registered trademark of Bluetooth SIG. Microsoft, Windows and ActiveSync

are either registered trademarks or trademarks of Microsoft Corporation. All other product or service names

are the property of their respective owners.

Motorola, Inc.

One Motorola Plaza

Holtsville, New York 11742-1300

http://www.motorola.com/enterprisemobility

Patents

This product is covered by one or more of the patents listed on the website: www.motorola.com/

enterprisemobility/patents.

Preliminary

iii

Revision History

Changes to the original manual are listed below:

Change Date Description

Preliminary

iv MC65 User Guide

Preliminary

Table of Contents

Patents.................................................................................................................................................. ii

Revision History.................................................................................................................................... iii

About This Guide

Introduction ........................................................................................................................................... xi

Documentation Set ......................................................................................................................... xi

Configurations....................................................................................................................................... xii

Software Versions........................................................................................................................... xii

Chapter Descriptions ............................................................................................................................ xiv

Notational Conventions......................................................................................................................... xiv

Related Documents .............................................................................................................................. xv

Service Information............................................................................................................................... xv

Chapter 1: Getting Started

Introduction .......................................................................................................................................... 1-1

Unpacking ............................................................................................................................................ 1-2

Accessories ......................................................................................................................................... 1-3

Getting Started ..................................................................................................................................... 1-4

Installing a microSD Card .............................................................................................................. 1-4

Installing the SIM Card ................................................................................................................... 1-5

Installing the Battery ...................................................................................................................... 1-6

Charging the Battery ...................................................................................................................... 1-7

Charging the Main Battery ....................................................................................................... 1-7

Charging Spare Batteries ......................................................................................................... 1-8

Charging Temperature ............................................................................................................. 1-8

Powering On the MC65 .................................................................................................................. 1-8

Calibrating the Screen ............................................................................................................. 1-8

Carrier Activation ................................................................................................................................. 1-10

Checking Battery Status ................................................................................................................ 1-10

Replacing the Battery .......................................................................................................................... 1-10

Removing the microSD Card ............................................................................................................... 1-11

Battery Management ........................................................................................................................... 1-12

Changing the Power Settings ........................................................................................................ 1-12

Preliminary

vi MC65 User Guide

Changing the Backlight Settings .................................................................................................... 1-12

Changing the Keypad Backlight Settings ....................................................................................... 1-12

Turning Off the Radios ................................................................................................................... 1-12

Handstrap Replacement ...................................................................................................................... 1-14

Removal ......................................................................................................................................... 1-14

Installation ...................................................................................................................................... 1-15

Chapter 2: Using the MC65

Introduction .......................................................................................................................................... 2-1

Finger Scrolling .................................................................................................................................... 2-1

Home Screens ..................................................................................................................................... 2-1

Windows Mobile Home Screen ...................................................................................................... 2-1

Classic Today Screen .............................................................................................................. 2-3

Status Bar ...................................................................................................................................... 2-4

Tile Bar ........................................................................................................................................... 2-7

Cards ............................................................................................................................................. 2-7

Program Shortcuts ................................................................................................................... 2-8

Programs Window .................................................................................................................... 2-8

Start Screen ................................................................................................................................... 2-8

Adjusting Volume ................................................................................................................................. 2-12

Battery Status Indications .................................................................................................................... 2-12

Battery Reserve Options ................................................................................................................ 2-13

Main Battery Temperature Notifications ......................................................................................... 2-14

LED Indicators ..................................................................................................................................... 2-15

Resetting the MC65 ............................................................................................................................. 2-16

Performing a Warm Boot ............................................................................................................... 2-16

Performing a Cold Boot .................................................................................................................. 2-16

Waking the MC65 ................................................................................................................................ 2-16

Locking the ES400 ............................................................................................................................... 2-17

Microsoft Locking ........................................................................................................................... 2-17

Password Locking .......................................................................................................................... 2-18

Motorola Locking ............................................................................................................................ 2-20

Password Locking .......................................................................................................................... 2-21

Finger Swipe Locking ..................................................................................................................... 2-22

Editing Fingerprint Swipes ............................................................................................................. 2-22

Edit Lock Screen ...................................................................................................................... 2-22

Audio Feedback ....................................................................................................................... 2-23

Keypads ............................................................................................................................................... 2-24

Numeric Keypad Configuration ...................................................................................................... 2-24

Alpha-numeric Keypad Configurations .......................................................................................... 2-27

PIM Keypad Configuration ............................................................................................................. 2-34

Special Character Key ............................................................................................................. 2-36

Function Buttons .................................................................................................................................. 2-38

Stylus ................................................................................................................................................... 2-38

Entering Data ....................................................................................................................................... 2-39

Data Capture ....................................................................................................................................... 2-40

Imaging .......................................................................................................................................... 2-40

Operational Modes ................................................................................................................... 2-40

Digital Camera ............................................................................................................................... 2-40

Preliminary

Table of Contents vii

Scanning Considerations ............................................................................................................... 2-41

Imager Scanning ............................................................................................................................ 2-41

Digital Camera Scanning ............................................................................................................... 2-42

Using Voice-Over-IP ............................................................................................................................ 2-43

Taking Photos ...................................................................................................................................... 2-43

Recording Video .................................................................................................................................. 2-44

Viewing Photos and Videos ................................................................................................................. 2-44

Chapter 3: Using GPS Navigation

Introduction .......................................................................................................................................... 3-1

Software Installation ............................................................................................................................ 3-1

MC65 GPS Setup ................................................................................................................................ 3-1

Operation ............................................................................................................................................. 3-2

GPS Maps on microSD Cards ....................................................................................................... 3-2

Answering a Phone Call While Using GPS .................................................................................... 3-2

Losing the GPS Signal While in a Vehicle ..................................................................................... 3-2

Assisted GPS ....................................................................................................................................... 3-2

Chapter 4: Using the Phone

Introduction .......................................................................................................................................... 4-1

Making a Call ....................................................................................................................................... 4-1

Using the Phone Keypad ............................................................................................................... 4-1

Smart Dialing ................................................................................................................................. 4-2

Using Contacts ............................................................................................................................... 4-3

Using Call History .......................................................................................................................... 4-3

Making a Speed Dial Call ............................................................................................................... 4-4

Answering a Call .................................................................................................................................. 4-4

Incoming Call Features .................................................................................................................. 4-5

Missed Call Notification ....................................................................................................................... 4-5

Emergency Calling ............................................................................................................................... 4-5

Audio Modes ???? ............................................................................................................................... 4-5

Using a Wired Headset .................................................................................................................. 4-6

Using a Bluetooth Headset ............................................................................................................ 4-6

Adjusting Audio Volume ................................................................................................................. 4-7

Muting a Call ........................................................................................................................................ 4-7

Using Call History ................................................................................................................................ 4-8

Managing Call History .................................................................................................................... 4-8

Changing the Call History View ............................................................................................... 4-8

Resetting the Recent Calls Counter ......................................................................................... 4-8

Deleting All Call History Items .................................................................................................. 4-9

Viewing Call Status .................................................................................................................. 4-10

Using the Call History Menu .................................................................................................... 4-11

Swapping Calls on GSM ...................................................................................................................... 4-11

Swapping Calls on CDMA ................................................................................................................... 4-12

Conference Calling on GSM ................................................................................................................ 4-13

Three-way Calling on CDMA ............................................................................................................... 4-15

Establishing a GSM Data Connection ................................................................................................. 4-16

Ending a Data Connection ............................................................................................................. 4-17

Preliminary

viii MC65 User Guide

Establishing an CDMA Data Connection ............................................................................................. 4-18

Ending a Data Connection ............................................................................................................. 4-18

Configuring a GSM Data Connection ............................................................................................. 4-19

MC65 Settings ..................................................................................................................................... 4-21

Phone ............................................................................................................................................. 4-21

Sounds ..................................................................................................................................... 4-21

Security .................................................................................................................................... 4-22

Services ......................................................................................................................................... 4-23

Call Barring (Call Blocking) ...................................................................................................... 4-23

Caller ID ................................................................................................................................... 4-24

Call Forwarding ........................................................................................................................ 4-24

Call Waiting .............................................................................................................................. 4-25

Voice Mail and Text Messages ................................................................................................ 4-25

Fixed Dialing ............................................................................................................................ 4-26

Internet Calling ............................................................................................................................... 4-26

Phone Network Setup .......................................................................................................................... 4-27

Activation Test ............................................................................................................................... 4-27

NITZ ............................................................................................................................................... 4-28

Chapter 5: Using Bluetooth

Introduction .......................................................................................................................................... 5-1

Adaptive Frequency Hopping .............................................................................................................. 5-1

Security ................................................................................................................................................ 5-2

Bluetooth Configuration ....................................................................................................................... 5-3

Bluetooth Power States ....................................................................................................................... 5-3

Cold Boot ................................................................................................................................. 5-3

Warm Boot ............................................................................................................................... 5-3

Suspend ................................................................................................................................... 5-4

Resume .................................................................................................................................... 5-4

Using Microsoft Bluetooth Stack .......................................................................................................... 5-5

Turning the Bluetooth Radio Mode On and Off .............................................................................. 5-5

Enabling Bluetooth ................................................................................................................... 5-5

Disabling Bluetooth .................................................................................................................. 5-5

Discovering Bluetooth Device(s) .................................................................................................... 5-6

Available Services .......................................................................................................................... 5-8

Object Push Services via Beam ............................................................................................... 5-8

Internet Sharing ....................................................................................................................... 5-10

Hands-free Services ................................................................................................................ 5-11

Serial Port Services ................................................................................................................. 5-11

ActiveSync Using Serial Port Services .................................................................................... 5-12

Phone Book Access Profile Services ....................................................................................... 5-14

Chapter 6: Accessories

Introduction .......................................................................................................................................... 6-1

Single Slot USB Cradle ........................................................................................................................ 6-2

Charging the MC65 Battery ........................................................................................................... 6-2

Charging the Spare Battery ........................................................................................................... 6-3

Battery Charging Indicators ........................................................................................................... 6-3

Preliminary

Table of Contents ix

Charging Temperature ............................................................................................................. 6-3

Four Slot Charge Only Cradle ............................................................................................................. 6-5

Charging ........................................................................................................................................ 6-5

Battery Charging Indicators ........................................................................................................... 6-5

Charging Temperature ............................................................................................................. 6-5

Four Slot Ethernet Cradle .................................................................................................................... 6-6

Charging ........................................................................................................................................ 6-6

Battery Charging Indicators ........................................................................................................... 6-6

Charging Temperature ............................................................................................................. 6-6

VCD5000 Vehicle Cradle ..................................................................................................................... 6-7

Charging the MC65 Battery ........................................................................................................... 6-7

Removing the MC65 ................................................................................................................ 6-7

Battery Charging Indicators ........................................................................................................... 6-8

Charging Temperature ............................................................................................................. 6-8

Four Slot Battery Charger .................................................................................................................... 6-9

Battery Charging ........................................................................................................................... 6-9

Battery Charging Indicators ........................................................................................................... 6-9

Charging Temperature ............................................................................................................. 6-9

Cables .................................................................................................................................................. 6-11

Battery Charging and Operating Power ......................................................................................... 6-11

LED Charge Indications ................................................................................................................. 6-12

Charging Temperature ............................................................................................................. 6-13

Vehicle Holder ..................................................................................................................................... 6-14

Installation Reminders ................................................................................................................... 6-14

Device Mounting Precautions ........................................................................................................ 6-14

Installation ...................................................................................................................................... 6-14

Assembly ................................................................................................................................. 6-15

Windshield Installation ............................................................................................................. 6-15

Flat Surface Installation ........................................................................................................... 6-16

Chapter 7: Maintenance & Troubleshooting

Introduction .......................................................................................................................................... 7-1

Maintaining the MC65 .......................................................................................................................... 7-1

Removing the Screen Protector ........................................................................................................... 7-2

Battery Safety Guidelines .................................................................................................................... 7-2

Cleaning ............................................................................................................................................... 7-3

Materials Required ......................................................................................................................... 7-3

Cleaning the MC65 ........................................................................................................................ 7-4

Housing .................................................................................................................................... 7-4

Display ..................................................................................................................................... 7-4

Scanner Exit Window ............................................................................................................... 7-4

Connector ................................................................................................................................ 7-4

Cleaning Cradle Connectors .......................................................................................................... 7-4

Cleaning Frequency ....................................................................................................................... 7-5

Troubleshooting ................................................................................................................................... 7-5

MC65 ............................................................................................................................................. 7-5

Bluetooth Connection ..................................................................................................................... 7-7

Single Slot USB Cradle .................................................................................................................. 7-8

Four Slot Ethernet Cradle .............................................................................................................. 7-9

Preliminary

x MC65 User Guide

Vehicle Cradle ................................................................................................................................ 7-10

Four Slot Battery Charger .............................................................................................................. 7-11

Cables ............................................................................................................................................ 7-11

Magnetic Stripe Reader ................................................................................................................. 7-12

Appendix A: Technical Specifications

MC65 Technical Specifications ............................................................................................................ A-1

MC65 ............................................................................................................................................. A-1

MC65 Accessory Specifications .......................................................................................................... A-7

Single Slot USB Cradle .................................................................................................................. A-7

Four Slot Battery Charger .............................................................................................................. A-7

Four Slot Charge Only Cradle ........................................................................................................ A-8

Four Slot Ethernet Cradle .............................................................................................................. A-8

Magstripe Reader .......................................................................................................................... A-10

Vehicle Cradle ................................................................................................................................ A-10

Cables ............................................................................................................................................ A-11

Glossary

Index

Preliminary

About This Guide

Introduction

This guide provides information about using the MC65 Enterprise Digital Assistant (EDA) and accessories.

Documentation Set

The documentation set for the MC65 provides information for specific user needs, and includes:

•

MC65 Quick Start Guide - describes how to get the MC65 EDA up and running.

•

MC65 User Guide - describes how to use the MC65 EDA.

•

MC65 Integrator Guide - describes how to set up the MC65 EDA and accessories.

•

Microsoft® Applications for Windows Mobile 6 User Guide - describes how to use Microsoft developed

applications.

•

Enterprise Mobility Application Guide - describes how to use Enterprise Mobility developed sample

applications.

•

Enterprise Mobility Developer Kit (EMDK) Help File - provides API information for writing applications.

NOTE Screens and windows pictured in this guide are samples and can differ from actual screens.

Preliminary

xii MC65 User Guide

Configurations

This guide covers the following configurations:

Software Versions

This guide covers various software configurations and references are made to operating system or software

versions for:

•

Adaptation Kit Update (AKU) version

•

OEM version

•

BTExplorer version

•

Fusion version

•

Phone version.

AKU Version

To determine the Adaptation Kit Update (AKU) version:

Tap Start > Settings > System tab > About icon > Version tab.

The second line lists the operating system version and the build number. The last part of the build number

represents the AKU number. For example, Build 18552.0.7.5 indicates that the device is running AKU version

0.7.5.

Configuration Radios Display Memory Data Capture

Options

Operating

System Keypads

MC659B WLAN: 802.11 a/b/g

WPAN: Bluetooth

v2.1 EDR

WWAN:

GSM/GPRS/EDGE/

CDMA

GPS: SiRF III

3.5” QVGA

Color 128 MB RAM/

256 MB Flash 1D laser

scanner,

2D imager,

1D laser

scanner and

camera or

2D imager and

camera

Windows

Mobile 6.5

Professional

Numeric,

Alphanumeric,

QWERTY,

QWERTZ or

AZWERTY

keypad

Preliminary

About This Guide xiii

OEM Version

To determine the OEM software version:

Tap Start > Settings > System tab > System Information icon > System tab.

Fusion Software

To determine the Fusion software version:

Tap Wireless Strength icon > Wireless Status > Versions.

Phone Software

To determine the Phone software version:

Tap Start > Phone > Menu > Options > PhoneInfo tab or Start > Setting > Settings > PhoneInfo icon.

Preliminary

xiv MC65 User Guide

Chapter Descriptions

Topics covered in this guide are as follows:

•

Chapter 1, Getting Started provides information on getting the MC65 up and running for the first time.

•

Chapter 2, Using the MC65 provides basic instructions for using the MC65, including powering on and

resetting the MC65, and entering and capturing data.

•

Chapter 3, Using GPS Navigation provides information about GPS navigation with the MC65.

•

Chapter 4, Using the Phone provides basic instructions for using the MC65 phone.

•

Chapter 5, Using Bluetooth explains Bluetooth functionality on the MC65.

•

Chapter 6, Accessories describes the available accessories and how to use them with the MC65.

•

Chapter 7, Maintenance & Troubleshooting includes instructions on cleaning and storing the MC65, and

provides troubleshooting solutions for potential problems during MC65 operation.

•

Appendix A, Technical Specifications provides the technical specifications for the MC65.

•

Appendix B, Voice Quality Manager provides information on Voice Quality Manager software.

Notational Conventions

The following conventions are used in this document:

•

“EDA” refers to the Motorola MC65 series of hand-held computers.

•

Italics are used to highlight the following:

•Chapters and sections in this and related documents

•Icons on a screen.

Preliminary

About This Guide xv

•

Bold text is used to highlight the following:

•Dialog box, window, and screen names

•Drop-down list and list box names

•Check box and radio button names

•Key names on a keypad

•Button names on a screen.

•

bullets (•) indicate:

•Action items

•Lists of alternatives

•Lists of required steps that are not necessarily sequential

•

Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists.

Related Documents

•

MC65 Quick Start Guide, p/n 72-114971-xx.

•

MC65 Windows Mobile 6.1 Regulatory Guide, p/n 72-108860-xx.

•

MC65 Integrator Guide, p/n 72E-108861-xx.

•

Microsoft® Applications for Windows Mobile 6 User Guide, p/n 72E-108299-xx.

•

Mobility Services Platform User Guide, p/n 72E-100158-xx.

•

Enterprise Mobility Application Guide, p/n 72E-68901-xx.

•

Enterprise Mobility Developer Kits (EMDKs), available at:

http://www.motorola.com/enterprisemobility/support.

•

Latest ActiveSync software, available at: http://www.microsoft.com.

For the latest version of this guide and all guides, go to: http://www.motorola.com/enterprisemobility/manuals.

Service Information

If you have a problem with your equipment, contact Motorola Enterprise Mobility support for your region. Contact

information is available at: http://www.motorola.com/enterprisemobility/contactsupport.

When contacting Enterprise Mobility support, please have the following information available:

•

Serial number of the unit (found on manufacturing label)

•

Model number or product name (found on manufacturing label)

Preliminary

xvi MC65 User Guide

•

Software type and version number.

Motorola responds to calls by email, telephone or fax within the time limits set forth in support agreements.

If your problem cannot be solved by Motorola Enterprise Mobility Support, you may need to return your equipment

for servicing and will be given specific directions. Motorola is not responsible for any damages incurred during

shipment if the approved shipping container is not used. Shipping the units improperly can possibly void the

warranty.

If you purchased your Enterprise Mobility business product from a Motorola business partner, contact that business

partner for support.

Manufacturing label

NEED WAN

DRAWING

Preliminary

Chapter 1 Getting Started

Introduction

This chapter lists the parts and accessories for the MC65 and explains how to set up the MC65 for the first time.

Figure 1-1

MC65 Front View

Scan/Decode

LED

Charging/Battery

Status LED

Radio Status

LED

Scan/Action

Button

Keypad

(Alpha-Numeric Keypad Shown)

Power Button

I/O Connector

Volume

Up/Down Button

Touch Screen with

Protective Overlay

Microphone

Preliminary

1 - 2 MC65 User Guide

Figure 1-2

MC65 Rear View

Unpacking

Carefully remove all protective material from the MC65 and save the shipping container for later storage and

shipping.

Verify that you received the following:

•

MC65 EDA

•

2400 or 3600 mAh Lithium-ion battery

•

stylus with tether (installed)

•

screen protector, installed on display window

•

Regulatory Guide

•

Quick Start Guide.

Inspect the equipment for damage. If any equipment is missing or damaged, contact the Motorola Enterprise

Mobility Support center immediately. See page xv for contact information.

Prior to using the MC65 for the first time, remove the protective shipping film that covers the scan window, display

and camera window.

Battery

Speaker

Exit Window

Stylus

Battery Latch

Camera

Stylus Clip

Camera Flash

Action Button

Scan/Action Button

Handstrap

Microphone

Preliminary

Getting Started 1 - 3

Accessories

Table 1-1 lists the accessories available for the MC65 EDA.

Table 1-1

MC65 Accessories

Accessory Part Number Description

Cradles

Single Slot USB Cradle CRD5500-1000UR Charges the MC65 main battery and a spare battery. Synchronizes

the MC65 with a host computer through a USB connection.

Single Slot

Ethernet/Modem/USB

Cradle

CRD5500-1000XR Charges the MC65 main battery and a spare battery. Synchronizes

the MC65 with a host computer through an Ethernet, Modem or USB

connection.

Four Slot Charge Only

Cradle CRD5500-4000CR Charges up to four MC65 devices.

Four Slot Ethernet Cradle CRD5500-4000ER Charges up to four MC65 devices and connects the MC65 with an

Ethernet network.

Vehicle Cradle VCD5500-1000R Installs in a vehicle and charges the MC65 main battery.

Vehicle Holder VCH5500-1000R Provides an alternative mounting solution for the MC65 in a vehicle.

Requires the Auto Charge cable for charging the MC65 battery.

Chargers

Four Slot Spare Battery

Charger SAC5500-4000CR Charges up to four MC65 battery packs.

USB Charging Cable 25-108022-01R Provides power to the MC65 and USB communication with a host

computer.

Charge Only Cable 25-112560-01R Connects to a power supply to provide power to the MC65.

Auto Charge Cable VCA5500-01R Charges the MC65 using a vehicle’s cigarette lighter.

Miscellaneous

Spare 2400 mAh lithium-ion

battery BTRY-MC55EAB00 Replacement 2400 mAh battery.

Spare 3600 mAh lithium-ion

battery BTRY-MC55EAB02 Replacement 3600 mAh battery.

DEX Cable TBD TBD

Magnetic Stripe Reader MSR5500-100R TBD

Belt Mounted Rigid Holster SG-MC5511110-01R Clips onto belt to hold the MC65 when not in use.

Fabric Holster SG-MC5521110-01R Soft holder for added protection.

Stylus KT-119150-03R

KT-119150-50R Replacement stylus (3-pack).

Replacement stylus (50-pack).

Spring Loaded Stylus STYLUS-00001-03R

STYLUS-00001-10R Optional spring loaded stylus (3-pack).

Optional spring loaded stylus (10-pack).

Wall Mounting Kit 8710-050006-01R Use for wall mounting the four slot cradles.

Preliminary

1 - 4 MC65 User Guide

Getting Started

To start using the MC65 for the first time:

•

Install a microSD card (optional)

•

Install the SIM card (GSM only)

•

Install the main battery pack.

•

Charge the MC65.

•

Power on the MC65.

Installing a microSD Card

The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack. Refer to

the documentation provided with the card for more information, and follow the manufacturer’s recommendations for

use.

To install the microSD card:

1. Lift rubber access door.

2. Slide the SIM card holder door up to unlock.

3. Lift SIM card holder door.

Figure 1-3

Lift SIM Slot Holder Door

4. Lift microSD card holder door.

Screen Protector KT-67525-01R Package of 3 screen protectors.

Software - Enterprise Mobility Developer Kits (EMDKs), available at:

http://support.symbol.com.

Table 1-1

MC65 Accessories (Continued)

Accessory Part Number Description

CAUTION Follow proper ESD precautions to avoid damaging the SD card. Proper ESD precautions include, but are

not limited to, working on an ESD mat and ensuring that the operator is properly grounded.

Rubber access door

microSD card holder door

SIM card holder door

Preliminary

Getting Started 1 - 5

5. Insert the microSD card into card holder door ensuring that the card slides into the holding tabs on each side of

the door.

Figure 1-4

Insert microSD Card in Holder

6. Close the card holder door and push down until it is securely into place.

7. Close SIM card holder door and slide down until it locks into place.

8. Close rubber access door.

Installing the SIM Card

GSM phone service requires a Subscriber Identification Module (SIM) card, or smart card. Obtain the card from the

your service provider. The card fits into the MC65 and can contain the following information:

•

Mobile phone service provider account details.

•

Information regarding service access and preferences.

•

Contact information, which can be moved to Contacts on the MC65.

•

Any additional services to which you have subscribed.

To install the SIM card:

1. Lift rubber access door.

2. Slide the SIM card holder up to unlock.

3. Lift the SIM card holder door.

microSD card

Holding tab

NOTE GSM only.

NOTE For more information about SIM cards, refer to the service provider's documentation.

Preliminary

1 - 6 MC65 User Guide

Figure 1-5

Lifting the SIM Cover

4. Insert the SIM card, as shown in Figure 1-6 ensuring that the card slides into the holding tabs on each side of

the door.

Figure 1-6

Inserting the SIM Card

5. Close SIM card holder door and slide down to lock into place.

6. Close the rubber access door.

7. Install the battery.

Installing the Battery

To install the battery.

1. Insert the battery, bottom first, into the battery compartment in the back of the MC65.

2. Press the battery down into the battery compartment until the battery release latch snaps into place.

NOTE For detailed information about WWAN activation and settings, refer to the MC65 Integrator Guide.

NOTE The MC65 ships with either a 2400 mAh or 3600 mAh battery. The 2400 mAh battery is shown in this

installation procedure.

Preliminary

Getting Started 1 - 7

Figure 1-7

Inserting the Battery

The MC65 powers up automatically after inserting the battery if the battery has been charged previously.

Charging the Battery

Charging the Main Battery

Before using the MC65 for the first time, charge the main battery until the amber Charging/Battery Status LED

remains lit (see Table 1-2 on page 1-8 for charge status indications). To charge the MC65, use a cable or a cradle

with the appropriate power supply. For information about the accessories available for the MC65, see Chapter 6,

Accessories.

For cable and cradle setup and charging procedures refer to the MC65 Integrator Guide.

•

USB Charging Cable

•

Charge Only Cable

•

Single Slot USB Cradle

•

Four Slot Charge Only Cradle

•

Four Slot Ethernet Cradle.

To charge the main battery:

1. Connect the charging accessory to the appropriate power source.

2. Insert the MC65 into a cradle or attach to a cable. The MC65 begins charging. The Charging/Battery Status

LED blinks amber while charging, then turns solid amber when fully charged. See Table 1-2 for charging

indications.

Battery

Battery Release Latch NEED WAN

DRAWING

CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 7-2.

Preliminary

1 - 8 MC65 User Guide

The 2400 mAh battery fully charges in less than four hours and the 3600 mAh battery charges in less than six

hours.

Charging Spare Batteries

See Chapter 6, Accessories for information on using accessories to change spare batteries.

Charging Temperature

Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Note that charging is intelligently controlled by

the MC65.

To accomplish this, for small periods of time, the MC65 or accessory alternately enables and disables battery

charging to keep the battery at acceptable temperatures. The MC65 or accessory indicates when charging is

disabled due to abnormal temperatures via its LED. See Table 1-2.

Powering On the MC65

After inserting the battery or when turning the MC65 on for the first time, the splash screen displays for about a

minute as the MC65 initializes its flash file system, then the calibration window appears. Note that these windows

also appear upon cold boot.

Calibrating the Screen

To calibrate the screen so the cursor on the touch screen aligns with the tip of the stylus:

1. Remove the stylus from its holder on the side of the MC65.

2. Carefully press and briefly hold the tip of stylus on the center of each target that appears on the screen.

Table 1-2

LED Charge Indicators

Charging/Battery

Status LED Indication

Off MC65 is not charging.

MC65 is not inserted correctly in the cradle or connected to a power source.

Charger/cradle is not powered.

Slow Blinking Amber

(1 blink every 2 seconds) MC65 is charging.

Solid Amber Charging complete.

Note: When the battery is initially inserted in the MC65, the amber LED flashes

once if the battery power is low or the battery is not fully inserted.

Fast Blinking Amber

(2 blinks/second) Charging error, e.g.:

•

Temperature is too low or too high.

•

Charging has gone on too long without completion (typically eight hours).

Single Blink Amber (when

Power button pressed) Battery depleted.

Blinking Amber (when

Power button pressed) Battery over-temperature condition.

NOTE The Calibration screen can be accessed by pressing Blue key then Backspace key.

Preliminary

Getting Started 1 - 9

3. Repeat as the target moves around the screen, then tap the screen to continue.

Preliminary

1 - 10 MC65 User Guide

Carrier Activation

Upon start up, the MC65 looks for an installed SIM card. If an active SIM card is detected the MC65 provisions

itself.

After installing the SIM card, activate your mobile service connection.

If the ES400 does not find an active SIM Card, an activation screen appears on the screen to activate on a CDMA

network.

Figure 1-8

Activation Screen

Tap Yes.

Call your carrier from an existing phone to request over-the-air activation. You need to provide the MEID number

from the screen.

Checking Battery Status

To check the charge status of the main battery in the MC65, tap Start > Settings > System tab > Power icon to

display the Power window.

To save battery power, tap the Advanced tab and set the MC65 to turn off after a specified number of minutes.

Replacing the Battery

1. Press the red Power button to suspend the MC65.

2. Use finger or stylus to slide the battery latch to the right releasing the battery. The battery ejects slightly.

NOTE If switching from one carrier to another, refer to the ES400 User Manual for detailed information.

NOTE To check battery status, remove the MC65 from any AC power source (cradle, cables, etc.)

Preliminary

Getting Started 1 - 11

Figure 1-9

Removing the Battery

3. Lift the battery from the MC65.

4. Insert the replacement battery, bottom first, into the battery compartment in the back of the MC65.

5. Press the battery down until the battery release latch snaps into place.

The MC65 powers up after inserting the battery.

Removing the microSD Card

To remove an microSD card:

1. Press the red Power button to suspend the MC65.

2. Remove the battery.

3. Lift the rubber access door.

4. Slide SIM card holder door up to unlock.

5. Lift SIM Card holder door.

6. Lift the microSD card holder door.

7. Remove microSD card from holder.

8. Close microSD card holder door.

9. Close SIM card holder door.

10. Slide SIM card holder door down to lock into place.

11. Close the rubber access door.

12. Replace the battery.

Battery Latch

NEED WAN

DRAWING

Preliminary

1 - 12 MC65 User Guide

Battery Management

Observe the following battery saving tips:

•

Leave the MC65 connected to AC power at all times when not in use.

•

Set the MC65 to turn off after a short period of non-use.

•

Set the backlight to turn off after a short period of non-use.

•

Turn off all wireless activities when not in use.

Changing the Power Settings

To set the MC65 to turn off after a short period of non-use:

1. Tap Start > Settings > System tab > Power icon > Advanced tab.

2. Select the On battery power: Turn off device if not used for check box and select a value from the

drop-down list.

3. Select ok.

Changing the Backlight Settings

To change the backlight settings in order to conserve more battery power:

1. Tap Start > Settings > System tab > Backlight icon > Battery Power tab.

2. Select the Disable backlight if device is not used for check box and select a value from the drop-down list.

3. Select the Brightness tab.

4. Tap the Disable backlight check box to turn off the display backlight, or use the slider to set a low value for the

backlight.

5. Select ok.

Changing the Keypad Backlight Settings

To change the keypad backlight settings in order to conserve more battery power:

1. Tap Start > Settings > System tab > Keylight icon > Battery Power tab.

2. Select the On battery power: Disable keylight if device if not used for check box and select a value from

the drop-down list.

3. Select the Advanced tab.

4. Tap the Disable keylight check box to turn off the keypad backlight.

5. Select ok.

Turning Off the Radios

Windows Mobile 6.1 devices include Wireless Manager, which provides a simple method of enabling, disabling,

and configuring all the device’s wireless capabilities in one place.

Preliminary

Getting Started 1 - 13

To open Wireless Manager, tap Start > Settings > Connectivity > Wireless Manager > .

Select Wireless Manager.

Figure 1-10

Wireless Manager Window

To enable or disable a wireless connection, tap the specific button.

To enable or disable all wireless connections, tap and hold the All button.

To configure settings for a connection, tap Menu.

Figure 1-11

Wireless Manager Menu

NOTE Wireless connection options vary depending upon configurations.

Preliminary

1 - 14 MC65 User Guide

Handstrap Replacement

Removal

To remove a handstrap from the MC65:

1. Slide the handstrap clip out of the handstrap slot.

Figure 1-12

Handstrap Clip Removal

2. Remove the battery.

3. Using a small flat screwdriver, push the head of the screwdriver between the handstrap pin and the bottom of

the housing as shown below.

4. Pry the handstrap and pin up and out of the handstrap mount area.

CAUTION When removing handstrap pin, be carefully not to damage handstrap mounting area.

Preliminary

Getting Started 1 - 15

Figure 1-13

Handstrap and Pin Removal

5. Repeat for the other side of the handstrap.

6. Remove pin from the handstrap.

Figure 1-14

Pin Removal

7. Pull handstrap through handstrap slot.

Installation

To install a new handstrap:

1. Feed bottom end of handstrap into handstrap slot on the bottom of the MC65.

Preliminary

1 - 16 MC65 User Guide

Figure 1-15

Feed handstrap into Handstrap Slot

2. Slide pin into bottom of handstrap.

3. Center the pin in the handstrap loop.

4. Pull handstrap so that the pin and bottom of handstrap slide into position in the mounting area.

Figure 1-16

Pin and Handstrap in Mounting Area

Figure 1-17

Slide Handstrap and Tether Over Handstrap Mount

5. Slide tether loop over handstrap.

6. Insert the handstrap clip into the slot on the device. Ensure that it is securely in place.

NOTE Handstrap and pin should fit securely into the handstrap mounting area. When pulling on handstrap use

enough force to engage pin into place.

Preliminary

Getting Started 1 - 17

Preliminary

1 - 18 MC65 User Guide

Preliminary

Chapter 2 Using the MC65

Introduction

This chapter explains the buttons, status icons, and controls on the MC65, and provides basic instructions for using

the MC65, including powering on and resetting the MC65, and entering and capturing data.

Finger Scrolling

Finger scrolling can be used to scroll up and down web pages, documents, and lists such as the contacts list, file

list, message list, calendar appointments list, and more.

When finger scrolling, swipe or flick your finger on the screen.

To scroll down, swipe your finger upward on the screen. To scroll up, swipe your finger downward on the screen.

To auto-scroll, flick your finger upward or downward on the screen. Touch the screen to stop scrolling.

Home Screens

The default home screen on the ES400 is the Windows Mobile Home screen. The ES400 also contains an

Motorola Enterprise Home screen.

Both Home screens contain a Status Bar at the top of the screen and a Tile Bar at the bottom of the screen. The

Windows Mobile Home screen contains application specific information and the Enterprise Home screen provides

Cards that are task specific.

Windows Mobile Home Screen

The Home screen is scrollable and contains a list of application plug-ins and an Information Status bar. The

Information Status bar highlights the application plug-in that is under it and provides additional information.

Preliminary

2 - 2 MC65 User Guide

Figure 2-1

Windows Mobile Home Screen

Touch and hold the screen with your finger and move the Home screen up and down. As the application names

move under the Information Status bar, information relevant to that application appear in the bar.

Figure 2-2

Moving Today Screen

You can also touch and hold the Information Status bar and move it up and down over an application name.

Remove your finger and the Information Status bar and application name center in the screen.

Open the Start Menu Tiles

Status Bar

Today Screen

Tile Bar

Preliminary

Using the MC65 2 - 3

Figure 2-3

Moving Information Status Bar

Figure 2-4

Information Bar Example

To customize the Home screen, tap > Settings > Today. On the horizontal scroll, use Appearance to

customize the background and the Items to change the display format.

Classic Today Screen

The user can change the Today screen to the classic layout that is used in Windows Mobile 6.1.

Figure 2-5

Classic Today Screen

Application Icon

Application Information

Soft Key Bar

Status Bar

Today Screen

Task Tray

Preliminary

2 - 4 MC65 User Guide

To change to the classic view tap > Settings > Home > Items.

Figure 2-6

Home Screen Settings

Deselect the Windows Default checkbox and select any of the other checkboxes.

Tap .

The task bar at the bottom of the screen can contain the task tray icons listed in Table 2-1.

Status Bar

The Status Bar at the top of the screen displays the status icons listed in Table 2-2. Tap anywhere on the Status

Bar to open the Device Management window. See XX for more information.

Figure 2-7

Status Bar Icons

Table 2-1

Task Tray Icons

Icon Name Description

Wireless connection

status Indicates WLAN signal strength.

ActiveSync Active serial connection between the MC75A and the host computer.

Battery

Audio

Connectivity

Notifications

Signal Strength

Battery

Clock

Preliminary

Using the MC65 2 - 5

Table 2-2

Status Bar Icons

Icon Description

Notifications

Backup battery low. Is there a backup battery????

Notification that one or more instant messages were received.

Notification that one or more e-mail/text messages were received.

Notification that one or more voice messages were received.

There are more notification icons than can be displayed. Tap to display remaining icons.

Indicates a reminder of an upcoming calendar event.

Connectivity

Connection is active.

Connection is not active.

Synchronization is occurring.

Wi-Fi available.

Wi-Fi in use.

HSDPA available. (GSM only)

3G available. (GSM only)

GPRS available. (GSM only)

EGPRS available. (GSM only)

1xRTT available. (CDMA only)

EVDO Rev. 0 available. (CDMA only)

EVDO Rev. A available. (CDMA only)

Dormant State - no data transmission during a 1x or EVDO connection. (CDMA only)

Roaming.

Preliminary

2 - 6 MC65 User Guide

WAN

Call missed.

Dialing while no SIM card is installed.

Voice call in progress.

Calls are forwarded.

Call on hold.

Speakerphone is on.

Antenna/signal icon: wireless on/good signal.

Antenna/signal icon: wireless off.

Antenna/signal icon: no service or searching.

HSDPA connecting. (GSM only)

HSDPA in use. (GSM only)

3G connecting. (GSM only)

3G in use. (GSM only)

GPRS connecting. (GSM only)

GPRS in use. (GSM only)

EGPRS connecting. (GSM only)

EGPRS in use. (GSM only)

EVDO connecting. (CDMA only)

EVDO in use. (CDMA only)

Table 2-2

Status Bar Icons (Continued)

Icon Description

Preliminary

Using the MC65 2 - 7

Tile Bar

The Tile Bar, located at the bottom of the screen, contains the Start tile to open the Start Menu. It also

displays tiles that vary depending upon the open application.

Figure 2-8

Tile Bar Examples

Cards

Cards are intended to provide quick access to completing common tasks. The number and type of cards available

to an end user are configurable by the system administrator. By default, the ES400 ships with four cards.

SIM Card not installed. (GSM only)

Audio

All sounds are on.

All sounds are off.

Vibrate is on.

Battery

Main battery is charging.

Main battery has a full charge.

Main battery has a high charge.

Main battery has a medium charge.

Main battery has a low charge.

Main battery has a very low charge.

Table 2-2

Status Bar Icons (Continued)

Icon Description

Preliminary

2 - 8 MC65 User Guide

Figure 2-9

Card Example

See for more information on the Enterprise Home screen.

Refer to XXX on page XX for information on configuring the Program window.

Program Shortcuts

The Program Shortcut buttons provides easy access for four applications. Just tap the icon to launch the

application. To configure the Program Shortcuts see to Program Shortcuts configuration on ....

Programs Window

The Programs window provides access to all the applications on the ES400. The window is configurable so that

you can display your favorite applications.

Figure 2-10

Programs Window

To configure the Program window see to Program WIndow Configuration on ....

Start Screen

To open the Start screen, tap at the bottom left corner of the screen, or press the START key on the keypad.

Swipe upward to view more program and folder icons.

Tap to Configure Cards

Owner’s Company Name

Tap to Open Date and Time

Tap to Configure Card Settings

Card Settings

Tap to Open Email

Tap to Open Calendar

Owner’s Name

Preliminary

Using the MC65 2 - 9

You can move often-used program and folder icons to the top of the Start screen for easy access.

Press and hold the icon that you want to move. Drag the icon to a new location and release.

Table 2-3 lists the default programs available on the ES400.

Table 2-3

Programs on the Program Window

Icon Name Description Icon Name Description

ActiveSync Synchronize information

between the ES400 and a

host computer or the

Exchange Server.

Calendar Keep track of appointments

and create meeting

requests.

Contacts Keep track of friends and

colleagues. File Explorer Organize and manage files

on your device.

Messenger Use this mobile version of

Windows Live Messenger. Phone

E-mail Send an Email. Pictures &

Videos View and manage pictures,

animated GIFs, and video

files.

Getting

Started Launch the Getting Started

application. Windows

Media Player

Mobile

Play back audio and video

files.

Internet

Explorer

Mobile

Browse Web and WAP sites

as well as download new

programs and files from the

Internet.

Marketplace Purchase applications from

the Marketplace.

Microsoft My

Phone Synchronizes the ES400’s

contacts, calendar, tasks,

text messages, music,

photos videos and

documents with a Microsoft

My Phone account.

Windows Live Use this mobile version of

Windows Live™ to find

information on the web.

MSN

Weather Check the local weather. MSN Money Keep track of your finances.

Games Play games. Calculator Perform basic arithmetic and

calculations, such as

addition, subtraction,

multiplication, and division.

Notes Create handwritten or typed

notes, drawings, and voice

recordings.

Excel Mobile Create new workbooks or

view and edit Microsoft®

Excel® workbooks.

Preliminary

2 - 10 MC65 User Guide

PowerPoint

Mobile View Microsoft®4

PowerPoint® slides and

presentations.

OneNote

Mobile Create new notes or view

existing notes.

Word Mobile Create, view, and edit

Microsoft® Word documents.

Text Send an SMS text message.

Tasks Keep track of your tasks. Home Displays the Home screen.

Internet

Sharing Connect a notebook

computer to the Internet

using the ES400's data

connection.

Settings

Task

Manager Enables viewing of memory

and CPU allocations and

stops running processes.

Refer to the Microsoft

Applications for Windows

Mobile 6 User Guide for

more information.

Help Access on-line Help topics.

Phone Search contacts, data, and

other information on the

ES400. Refer to the

Microsoft Applications for

Windows Mobile 6 User

Guide for more information.

Wireless

Companion

Folder

Open the Wireless

Companion folder.

Information Display information about

the Bluetooth radio and

generate a Bluetooth

address bar code.

AirBEAM

Client Allows specially designed

software packages to be

transferred between a host

server and the ES400. Refer

to the ES400 Integrator

Guide for more information.

Modem Link Enables the ES400 to be

used as a modem. DEMO Install Motorola MAX demos

onto the ES400. Is this

going to be added?

MSP Agent Interacts with MSP agents to

collect monitoring and asset

information to enable the

configuration, provisioning,

monitoring and

troubleshooting of the

ES400. Refer to the ES400

Integrator Guide for more

information.

Remote

Desktop Log onto Windows NT server

type computers and use all of

the programs that are

available on that computer

from the ES400.

Table 2-3

Programs on the Program Window (Continued)

Icon Name Description Icon Name Description

Preliminary

Using the MC65 2 - 11

Rapid

Deployment

Client

Facilitates software

downloads from a Mobility

Services Platform Console

FTP server to the ES400.

Refer to the ES400

Integrator Guide for more

information.

Widget Install Microsoft application

on the ES400.

Alarms

Office Mobile

Adobe

Reader

Camera

Gallery

Shutdown

SwitchUSB

Voice

Commander

VideoShare

Table 2-3

Programs on the Program Window (Continued)

Icon Name Description Icon Name Description

Preliminary

2 - 12 MC65 User Guide

Adjusting Volume

To adjust the system volume using the Speaker icon in the navigation bar:

1. Tap the Speaker icon. The Volume dialog box appears.

Figure 2-11

Volume Dialog Box

2. Tap and move the slide bar to adjust the volume.

3. Select the On or Off radio button to turn the volume on or off.

You can also adjust the system volume using the Sounds & Notifications window, or use the Up/Down button on

the side of the MC65.

Battery Status Indications

Battery icons appear on the navigation bar indicating the battery power level. When the main battery power falls

below a predetermined level the icon indicates the status and a battery dialog box appears indicating the status of

the battery.

Figure 2-12

Battery Status Dialog Box

The Battery icon always appears in the navigation bar when the Today screen is visible. The icon indicates the

battery power level. The message displays until the Dismiss button is pressed.

Preliminary

Using the MC65 2 - 13

Figure 2-13

Battery Icon on the Title Bar

Also view the battery status using the Power window. Either:

•

Tap the Battery icon

•

Tap Start > Settings > System tab > Power icon.

Figure 2-14

Settings Power Window

Battery Reserve Options

If the charge of the battery reaches a critical threshold, the MC65 shuts down. This threshold can be changed but

affects the amount of time that data can be retained.

1. Tap Start > Settings > System tab > Power icon > RunTime tab. A warning message appears.

Figure 2-15

Warning Message

2. Read the warning message and tap ok.

Preliminary

2 - 14 MC65 User Guide

Figure 2-16

RunTime Tab

3. Select one of the Battery Reserve Options.

•

Option 1: Minimum - After a low battery shutdown, data will be retained for minimum amount of time.

Battery should be replaced immediately to avoid data loss.

•

Option 2: Less - After a low battery shutdown, data will be retained for less than normal amount of time.

•

Option 3: Normal - After a low battery shutdown, data will be retained for maximum amount of time.

4. Tap ok.

Main Battery Temperature Notifications

The temperature notification system implements three levels of notification when the temperature within the battery

exceeds specific temperature thresholds:

•

Level 1: Temperature Watch; this level is similar to main battery low warning. It indicates that the battery

temperature has reached the first threshold level. The user should move to an environment within proper

operating temperature.

•

Level 2: Temperature Warning; this level is similar to main battery very low warning. It indicates the battery

temperature has reached the second threshold level. The user should close all running applications and stop

using the MC65.

•

Level 3: Temperature Error; this level indicates the battery has reached an unusable temperature threshold

and immediately suspends the MC65. This level does not have any graphical notification associated with it.

Figure 2-17

Main Battery Temperature Watch Dialog Box

Preliminary

Using the MC65 2 - 15

Figure 2-18

Main Battery Temperature Warning Dialog Box

LED Indicators

The MC65 has three LED indicators. The Scan/Decode LED indicates status for scanning. The Charging/Battery

Status LED indicates battery charging and status.The Radio Status LED indicates WWAN radio status. Table 2-4

describes the LED indications.

Figure 2-19

LED Indicators

NOTE The Temperature Warning dialog box remains visible until you tap Hide.

Table 2-4

LED Indications

LED State Indication

Scan/Decode LED

Solid Green Successful decode/capture.

Solid Red Laser enabled, scanning/imaging in process.

Off Not enabled.

Charging/Battery Status LED

Slow Blinking Amber Main battery in MC65 is charging.

Solid Amber Main battery in MC65 is fully charged.

Scan/Decode

LED

Charging/Battery

Status LED

Charging/Battery

Status LED Radio Status LED

Preliminary

2 - 16 MC65 User Guide

Resetting the MC65

There are two reset functions, warm boot and cold boot. A warm boot restarts the MC65 by closing all running

programs. A cold boot also restarts the MC65, and also initializes some drivers. Data saved in flash memory or a

memory card is not lost.

If the MC65 is not functioning properly, perform a warm boot first. If the MC65 still does not respond, perform a cold

boot.

Performing a Warm Boot

Hold down the red Power button for approximately five seconds. As soon as the MC65 starts to boot (splash

screen displays) release the Power button.

Performing a Cold Boot

To perform a cold boot:

•

On a numeric keypad, simultaneously press the red Power button and the and keys.

•

On an alphanumeric keypad, simultaneously press the red Power button and the and keys.

•

On an PIM keypad, simultaneously press the red Power button and the and keys.

Waking the MC65

The wake-up conditions define what actions wake up the mobile computer after it has gone into suspend mode.

The mobile computer can go into suspend mode by either pressing the Power button or automatically by Control

Fast Blinking Amber Charging error.

Off Not charging.

Single Blink Amber (when Power button pressed) Battery depleted.

Blinking Amber (when Power button pressed) Battery over-temperature condition.

Radio Status LED (MC6574 only)

Slow Blinking Green RF (WWAN) activity.

Off No RF activity.

Table 2-4

LED Indications (Continued)

LED State Indication

NOTE For information about scanning/decoding, see Data Capture on page 2-40. For information about WWAN

radio status and settings, see Chapter 4, Using the Phone, or refer to the MC65 Integrator Guide.

Preliminary

Using the MC65 2 - 17

Panel time-out settings. These settings are configurable and the factory default settings are shown in Table 2-5 are

subject to change/update.

Locking the ES400

You can lock the ES400 by disabling key presses and screen tap or by requiring a password or finger swipe. There

are two types of locking features available; the standard Microsoft lock and the Motorola lock. To select either the

Microsoft lock or the Motorola lock:

1. Tap > System > Lock Switch.

2. Tap the Select Lock soft key.

3. Select either Moto lock or Microsoft lock.

4. Tap .

Microsoft Locking

Locking the ES400 turns off keyboard and touch screen functionality. This is helpful when the ES400 is turned on

and you want to prevent accidental key presses.

To lock the device, tap > .

The lock screen appears.

Table 2-5

Wake-up Default Settings

Condition for Wake-up Power Button Automatic Time-out

AC power is applied. No Yes

Mobile computer is inserted into a cradle. No Yes

Mobile computer is removed from a cradle. No Yes

Mobile computer is connected to a USB device. No Yes

Mobile computer is disconnected from a USB device. No Yes

A key is pressed. No Yes

The scan triggered is pressed. No Yes

The screen is touched. No No

Bluetooth communication Yes Yes

Incoming phone call Yes Yes

Preliminary

2 - 18 MC65 User Guide

Figure 2-20

Lock Screen

Drag to either the right or left side of the screen.

Figure 2-21

Password Window

If a password is set up, enter the password and then tap to unlock and display the Home screen, tap

to unlock and display the Contacts window, tap to unlock and display the Messaging window.

Password Locking

Use the Password window to set a password to disable unauthorized access to the ES400.

1. Tap > Settings > Lock > Password.

NOTE You can make emergency calls even when the ES400 is locked. See XXXXXXXX for more information.

NOTE If the device is configured to connect to a network, use a strong (difficult to figure out) password

to help protect network security. Password cracking tools continue to improve and the

computers used to crack passwords are more powerful than ever.

Preliminary

Using the MC65 2 - 19

Figure 2-22

Password Window

2. Select Prompt if device unused for check box to enable password protection.

3. From the drop-down list, select a time value for the protection to take affect after non-use.

4. From the Password type: drop-down list, select either Simple PIN or Strong alphanumeric.

5. For a simple password, enter a four-digit password in the Password field.

For a stronger password:

a. Enter a seven character password in the Password: field. A strong password must contain at least seven

characters and contain at least three of the following: uppercase and lowercase letters, numerals, and

punctuation.

b. Re-enter the password in the Confirm: field.

6. Tap .

7. In the horizontal scroll, select Hint. Enter a hint to remember the password if you forget it.

8. Tap .

Figure 2-23

Password Window - Hint Tab

9. In the text box, enter a hint for a password reminder.

10. Tap .

When the ES400 is not used for a period of time and the user tries to access the device, the Lock window appears.

Preliminary

2 - 20 MC65 User Guide

Figure 2-24

Lock Window

1. Slide the Lock button to the left or right.

2. Enter the password to un-lock the device.

Figure 2-25

Enter Password Window

3. Tap the Unlock icon.

Motorola Locking

With the Motorola Lock you can use a password or fingerprint swipe to un-lock the device.

Tap > Lock.

Preliminary

Using the MC65 2 - 21

Figure 2-26

Motorola Lock Settings Window

Password Locking

1. Tap Password type to toggle between Simple and Strong.

2. For a simple password:

a. enter a four-digit password in the Password field.

b. Re-enter the password in the Confirm: field.

For a stronger password:

c. Enter a seven character password in the Password: field. A strong password must contain at least seven

characters and contain at least three of the following: uppercase and lowercase letters, numerals, and

punctuation.

d. Re-enter the password in the Confirm: field.

3. To set a hint to remember the password, tap the Hint button.

Figure 2-27

Password Window - Hint Tab

4. In the text box, enter a hint for a password reminder.

5. Tap .

Preliminary

2 - 22 MC65 User Guide

Finger Swipe Locking

To enable device un-locking using a fingerprint swipe:

1. Tap Add fingerprint.

Figure 2-28

Add Fingerprint Window

2. Select a finger and slide the fingerprint across the fingerprint reader in a downward motion starting at the

bottom of the fingerprint.

3. When the fingerprint is read successfully, a green check mark appears in the first box.

4. Repeat swiping your fingerprint three more times.

5. If a red X appears in the box, re-swipe your fingerprint.

You can add up to 10 fingerprints.

Editing Fingerprint Swipes

After enrolling fingerprints you change edit the enrolled fingerprint.

1. Select the fingerprint to edit.

2. In the text box, change the name associated with this fingerprint.

3. Tap Change fingerprint to edit the fingerprint data.

4. Swipe a new fingerprint.

5. Tap Program launched to select a program to automatically launch when you swipe a particular fingerprint.

6. To remove a fingerprint, tap Remove fingerprint.

7. Tap Yes to confirm deleting the fingerprint.

Edit Lock Screen

When the device suspends and you try to resume, the Motorola Lock screen appears.

Preliminary

Using the MC65 2 - 23

Figure 2-29

Figure 2-30

Motorola Lock Screen

You can change what information appears on the screen.

Tap Edit Lock Screen.

Figure 2-31

Edit Lock Screen Window

Select the item to display on the Lock screen. A yellow target appears when the item is enabled.

Tap when done.

Audio Feedback

To enable an audio sound to be heard upon a successful finger swipe:

Tap Audio feedback.

To change the fingerprint tap the

Preliminary

2 - 24 MC65 User Guide

Keypads

The MC65 offers three types modular keypad configurations: Numeric, alpha-numeric and PIM.

Numeric Keypad Configuration

The numeric keypad contains application keys, scroll keys, and function keys. The keypad is color-coded to

indicate the alternate function key (blue) values. Note that an application can change keypad functions so the

MC65’s keypad may not function exactly as described. See Table 2-6 for key and button descriptions and Table 2-7

on page 2-26 for the keypad’s special functions.

Figure 2-32

MC65 Numeric Keypad

Table 2-6

MC65 Numeric Keypad Descriptions

Key Description

Blue Key

Use this key to launch applications or access items (shown on the keypad in blue).

Press the Blue key once to activate this mode, followed by another key.

A single press illuminates the key and displays the following icon at the bottom of the

screen, until a second key is pressed:

Orange Key

Use this key to access the secondary layer of characters and actions (shown on the keypad

in orange). Press the Orange key once to lock the keypad into Alpha state.

A single press illuminates the key and displays the following icon at the bottom of the

screen:

Press the Orange key a second time to return to the normal state.

Press the Orange key, then the Shift key to add a temporary shift (that applies only to the

next key pressed) to the orange lock state. This displays the following icon at the bottom of

the screen:

Preliminary

Zebra Technologies MC659B ENTERPRISE DIGITAL ASSISTANT (EDA) User Manual MC55 User Guide P N 72E 108859 02 Rev A

Zebra Technologies Corporation ENTERPRISE DIGITAL ASSISTANT (EDA) MC55 User Guide P N 72E 108859 02 Rev A

Contents

Users Manual 1

Navigation menu

Namespaces

Views

Navigation