Zebra Technologies RFD5500 UHF RFID READER ACCESSORY User Manual 16413101a Front

Download:
Mirror Download [FCC.gov]
Document ID	1918017
Application ID	KlaLf5i2pCFUyV62oNIM0Q==
Document Description	Quick start guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	117.57kB (1469674 bits)
Date Submitted	2013-03-15 00:00:00
Date Available	2013-03-15 00:00:00
Creation Date	2012-08-01 20:07:03
Producing Software	Adobe PDF library 9.90
Document Lastmod	2012-08-29 10:17:55
Document Title	16413101a_Front
Document Creator	Adobe Illustrator CS5

RFD5500
Quick Start Guide
Left View
Front View
Inserting the MC55 into Trigger Accessory
Insert the Battery
1. Insert the battery, connector end first, into the battery compartment.
2. Press down on the battery until the battery latch snaps into place.
Charging and Communication
Scanning
Slide the MC55 into the Trigger Accessory until it locks in place. The latches
secure the MC55 to the Trigger Accessory.
The Trigger Accessory can be used to charge the MC55 and communicate with a host
computer using either the USB charging cable or a cradle, or connect to a peripheral.
To scan bar codes:
1. Start the MC55 scanning application.
2. Aim the MC55 at the bar code.
3. Press the trigger on the handle. The Scan/Decode LED lights and a beep sounds to
indicate a successful decode.
Using the USB Charge and Communication Cable
To charge the MC55 battery or comminicate with a host computer while the MC55 is
in the Trigger Accessory, use the USB Charging Cable setup below:
FEATURES
Right View
Latch
Trigger
Release Button
Charge LED
Status LED
Antenna
Battery Latch
Introduction
The RFD5500 Trigger Handle Accessory adds a RFID gun-style handle with
a scanning trigger to the MC55. Used for all RFID operations, the RFD5500
increases comfort when using the terminal in scan-intensive applications
for extended periods of time.
Remove the Battery
1. Open battery latch on bottom of trigger accessory handle.
2. Remove battery.
Removing the MC55 from the Trigger Accessory
To remove the MC55, press the release buttons and pull the MC55 forward and up.
CHARGING AND COMMUNICATION
SCANNING
DEVICE INSTALLATION
GETTING STARTED - BATTERY INSTALLATION
For detailed information on MC55 scanner functions, refer to the MC55 User Guide.
Install Trigger Accessory Software on MC55
In order to use the Trigger Accessory with the MC55, software installation is
required. Download the Trigger Accessory Software file from the Motorola
Support Central web site: www.motorolasolutions.com/support.
Follow the directions provided with the software and install the file onto the
device using ActiveSync. Refer to the MC55 Integrator Guide for instruction on
installing software.
Charge LED Indicator
Slow Flash = Normal Charge
Solid Amber = Full Charge
Single-slot USB Cradle
More Information on the RFD5500
Four-slot MC55 Battery Charger
Charge Only Cable
USB/Charge Cable
RFID Operation
Optimum Upright
Body Posture
For the latest version of this guide and related product information, visit the Motorola
Web site at: http://www.motorolasolutions.com/support.
Optimum Body Posture
for Low Scanning
Optimum Body Posture
for High Scanning
Service
Four-slot Charge Only Cradle
Motorola Solutions, Inc.
One Motorola Plaza Holtsville, New York 11742-1300, USA
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or
registered trademarks of Motorola Trademark Holdings, LLC and are used under license.
All other trademarks are the property of their respective owners. © 2011 Motorola Solutions,
Inc. All rights reserved.
Four-slot RFID Battery Charger
Optimum Scanning Positions
012345
CORRECT
012345
CORRECT
012345
Use a ladder
Taking breaks and task rotation recommended
AVOID BENDING
WRONG
012345
WRONG
Alternate left
and right hand
72-164131-01 Rev. A — June 2012
RFD5500 Quick Start Guide
Note: Trigger Accessory can charge without mobile device attached.
ALTERNATE
ATE LEFT AND RIGHT HANDS
http://www.motorolasolutions.com/RFD5500
TAKING BREAKS AND TASK ROTATION RECOMMENDED
AVOID REACHING
AVOID EXTREME WRIST ANGLES
ACCESSORIES
For the complete Motorola hardware product warranty statement, go to:
http://www.motorola.com/enterprisemobility/warranty.
OPTIMUM RFID TAG DECODING
Warranty
TAG DECODING
OPTIMUM RFID BODY
POSTURE
If you have a problem using the equipment, contact your facility’s Technical or
Systems Support. If there is a problem with the equipment, they will contact Motorola
Solutions support at: http://www.motorolasolutions.com/support.
AVOID EXTREME
WRIST ANGLES

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2012:08:29 10:17:55+01:00
Create Date                     : 2012:08:01 20:07:03-04:00
Metadata Date                   : 2012:08:29 10:17:55+01:00
Creator Tool                    : Adobe Illustrator CS5
Format                          : application/pdf
Title                           : 16413101a_Front
Document ID                     : uuid:dbc71898-f873-454d-b990-127aad4f5e3f
Instance ID                     : uuid:f414df69-d281-4b91-aac3-becacf75033c
Producer                        : Adobe PDF library 9.90
Page Count                      : 2
Creator                         : Adobe Illustrator CS5

EXIF Metadata provided by EXIF.tools