Zebra Technologies TC700K Touch computer User Manual TC70x Touch Computer Regulatory Guide en

Zebra Technologies Corporation Touch computer TC70x Touch Computer Regulatory Guide en

Contents

Users Manual

We reserves the right to make changes to any product to improve reliability, function, or design. We do not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which our products might be used. An implied license exists only for equipment, circuits, and subsystems contained in the products.WarrantyFor the complete hardware product warranty statement, go to: http://www.zebra.com/warranty.Service InformationIf you have a problem using the equipment, contact your facility’s Technical or Systems Support. If there is a problem with the equipment, they will contact the Global Support Center at: http://www.zebra.com/support.For the latest version of this guide go to: http://www.zebra.com/support.Zebra Technologies Corporation3 Overlook PointLincolnshire, IL, U.S.A.http://www.zebra.comZebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners.© 2016 Symbol Technologies LLC, a subsidiary of Zebra Technologies Corporation. All Rights Reserved.MN-002960-01 Rev. A — January 2017Touch ComputerTC70xRegulatory GuideMore InformationRefer to the TC70x User Guide for Android Version X.X for more information on using this device. Go to http://www.zebra.com/support.Regulatory InformationThis device is approved under Zebra Technologies Corporation.This guide applies to the following Model Number TC700K.All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold and will be labeled as required.Local language translations are available at the following website: www.zebra.com/support.Any changes or modifications to Zebra equipment, not expressly approved by Zebra, could void the user’s authority to operate the equipment.UL Listed Products with GPSUnderwriters Laboratories Inc. (UL) has not tested the performance or reliability of the Global Positioning System (GPS) hardware, operating software, or other aspects of this product. UL has only tested for fire, shock, or casualties as outlined in UL's Standard(s) for Safety for Information Technology Equipment, UL60950-1. UL Certification does not cover the performance or reliability of the GPS hardware and GPS operating software. UL makes no representations, warranties, or certifications whatsoever regarding the performance or reliability of any GPS related functions of this product. Bluetooth® Wireless TechnologyThis is an approved Bluetooth® product. For more information or to view End Product Listing, please visit https://www.bluetooth.org/tpg/listings,cfmWireless Device Country ApprovalsRegulatory markings, subject to certification, are applied to the device signifying the radio(s) is/are approved for use in the following countries: United States, Canada, Japan, China, S. Korea, Australia, and Europe.Please refer to the Zebra Declaration of Conformity (DoC) for details of other country markings. This is available at www.zebra.com/doc.Note: Europe includes, Austria, Belgium, Bulgaria, Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.Country RoamingThis device incorporates the International Roaming feature (IEEE802.11d) which will ensure the product operates on the correct channels for the particular country of use.Wi-Fi Direct Wi-Fi Direct operation is limited to the following channels/bands as supported in the country of use.˙Channels 1-11 (2412-2462 MHz).˙Channels 36 - 48 (5150-5250 MHz).˙Channels 149 - 165 (5745-5825 MHz).Frequency of Operation – FCC and IC 5 GHz OnlyIndustry Canada Statement2.4 GHz OnlyThe available channels for 802.11 b/g operation in the US are Channels 1 to 11. The range of channels is limited by firmware.Health and Safety RecommendationsErgonomic Recommendations• Reduce or eliminate repetitive motion• Maintain a natural position• Reduce or eliminate excessive force• Keep objects that are used frequently within easy reach• Perform tasks at correct heights• Reduce or eliminate vibration• Reduce or eliminate direct pressure• Provide adjustable workstations• Provide adequate clearance• Provide a suitable working environment• Improve work procedures.Vehicle InstallationRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (including safety systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer about any equipment that has been added to your vehicle.An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. Position the device within easy reach. Be able to access the device without removing your eyes from the road.For Safe installation• Do not put your phone in a location that obstructs the drivers vision or interferes with the operation of the Vehicle.• Do not cover an airbag.Safety on the RoadDo not take notes or use the device while driving. Jotting down a “to do” list or flipping through your address book takes attention away from your primary responsibility, driving safely. When driving a car, driving is your first responsibility - Give full attention to driving. Check the laws and regulations on the use of wireless devices in the areas where you drive. Always obey them.When using a wireless device behind the wheel of a car, practice good common sense and remember the following tips:1. Get to know your wireless device and any features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.2. When available, use a hands free device. 3. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous. 4. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. 5. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road.6. Use your wireless phone to call for help. Dial the Emergency services, (9-1-1 in the US, and 1-1-2 in Europe) or other local emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone! The call can be made regardless of any security codes and depending on a network, with or without a SIM card inserted.7. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call the Emergency Services, (9-1-1 in the US, and 1-1-2 in Europe) or other local emergency number, as you would want others to do for you.8. Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.“The wireless industry reminds you to use your device / phone safely when driving”.Warnings for Use of Wireless DevicesPotentially Hazardous Atmospheres – Vehicles UseYou are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders) and any other area where you would normally be advised to turn off your vehicle engine.Safety in AircraftSwitch off your wireless device whenever you are instructed to do so by airport or airline staff. If your device offers a ‘flight mode’ or similar feature, consult airline staff as to its use in flight.Wireless devices transmit radio frequency energy and may affect medical electrical equipment.Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or healthcare facilities. These requests are designed to prevent possible interference with sensitive medical equipment.PacemakersPacemaker manufacturers recommended that a minimum of 15 cm (6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research.Persons with Pacemakers:• Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON.• Should not carry the device in a breast pocket.• Should use the ear furthest from the pacemaker to minimise the potential for interference.• If you have any reason to suspect that interference is taking place, turn OFF your device.Other Medical DevicesPlease consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device.Safety InformationReducing RF Exposure – Use Properly Only operate the device in accordance with the instructions supplied.InternationalThe device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on “International” human exposure to electromagnetic fields refer to the Zebra Declaration of Conformity (DoC) at http://www.zebra.com/doc.For further information on the safety of RF energy from wireless devices - see https://www.zebra.com/us/en/about-zebra/company-information/corporate-responsibility.html located under Corporate Responsibility.EuropeHandheld DevicesThis device was tested for typical body-worn operation. Use only Zebra tested and approved belt-clips, holsters, and similar accessories to ensure EU Compliance.US and CanadaPhones (placed to ear or used with headset)Use only Zebra tested and approved belt clips, holsters, and similar accessories to ensure FCC Compliance. The use of third-party belt clips, holsters, and similar accessories may not comply with FCC RF exposure compliance requirements and should be avoided. The FCC has granted an Equipment Authorization for these model phones with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on these model phones is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/ea/fccid.Co-located statementTo comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located or operating in conjunction with any other transmitter/antenna except those already approved in this filling.Handheld DevicesThis device was tested for typical body worn operation. Use only Zebra tested and approved belt-clips, holsters, and similar accessories to ensure FCC Compliance. The use of third-party belt clips, holsters, and similar accessories may not comply with FCC RF exposure compliance requirements, and should be avoided.To satisfy US and Canadian RF exposure requirements, a transmitting device must operate with a minimum separation distance of 1.5 cm or more from a person's body.Pour satisfaire aux exigences Américaines et Canadiennes d'exposition aux radio fréquences, un dispositif de transmission doit fonctionner avec une distance de séparation minimale de 1.5 cm ou plus de corps d'une personne.Class 2 laser scanners use a low power, visible light diode. As with any very bright light source such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful.The following statement is required to comply with US and international regulations. Scanner LabelingLabels Read:1. LASER LIGHT: DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT.2. CAUTION - CLASS 2 LASER LIGHT WHEN OPEN. DO NOT STARE INTO THE BEAM.3. COMPLIES WITH 21CFR1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS PURSUANT TO LASER NOTICE NO. 50, DATED JUNE 24, 2007 AND IEC/EN 60825-1:2014LED DevicesClassified as 'EXEMPT RISK GROUP' according to IEC 62471:2006 and EN 62471:2008.Pulse duration: 1.7 ms. Power SupplyUse ONLY a Zebra approved UL LISTED ITE (IEC/EN 60950-1, LPS) power supply with electrical ratings: Output 5.4 VDC, min 3.0 A, with a maximum ambient temperature of at least 50°C. Use of alternative power supply will invalidate any approvals given to this unit and may be dangerous.BatteriesTaiwan - RecyclingEPA (Environmental Protection Administration) requires dry battery producing or importing firms in accordance with Article 15 of the Waste Disposal Act are required to indicate the recycling marks on the batteries used in sales, giveaway or promotion. Contact a qualified Taiwanese recycler for proper battery disposal.Battery InformationUse only Zebra approved batteries. Accessories which have battery charging capability are approved for use with the following battery models:• Model: BT-000318 (3.7 VDC, 4500 mAh)Zebra rechargeable battery packs are designed and constructed to the highest standards within the industry.However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops.When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality may occur. Store batteries at half of full charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half of full charge.Replace the battery when a significant loss of run time is detected.Standard warranty period for all Zebra batteries is one year, regardless if the battery was purchased separately or included as part of the mobile computer or bar code scanner. For more information on Zebra batteries, please visit: http://www.zebra.com/batterybasics.Battery Safety GuidelinesThe area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non commercial environment.• Follow battery usage, storage, and charging guidelines found in the user's guide.• Improper battery use may result in a fire, explosion, or other hazard.• To charge the mobile device battery, the battery and charger temperatures must be between +32°F and +104°F (0°C and +40°C).• Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Zebra support.• For devices that utilize a USB port as a charging source, the device shall only be connected to products that bear the USB-IF logo or have completed the USB-IF compliance program.• Do not disassemble or open, crush, bend or deform, puncture, or shred.• Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat.• Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals.• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard.• Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer.• Battery usage by children should be supervised.• Please follow local regulations to promptly dispose of used re-chargeable batteries.• Do not dispose of batteries in fire.• Seek medical advice immediately if a battery has been swallowed.• In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice.• If you suspect damage to your equipment or battery, contact Zebra support to arrange for inspection.Hearing Aid CompatibilityThis device is in compliance with the applicable requirements of IC CS-03-Part V.Radio Frequency Interference Requirements-FCCNote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna• Increase the separation between the equipment and receiver• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected• Consult the dealer or an experienced radio/TV technician for help.Radio Transmitters (Part 15)This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Radio Frequency Interference Requirements- CanadaCAN ICES-3 (B)/NMB-3(B) Radio TransmittersThis device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radio électrique subi même si le brouillage est susceptible d'en compromettre le fonctionnement.For RLAN Devices:The use of 5 GHz RLAN’s, for use in Canada, have the following restrictions:• Restricted Band 5.60 – 5.65 GHzPour les équipements RLAN:L'utilisation de la bande RLAN 5 GHz au Canada présente les limitations suivantes :• Bande restreinte 5.60 - 5.65 GHz Label Marking: The Term “IC:” before the radio certification only signifies that Industry Canada technical specifications were met.Etiquette de marquage: Le terme “IC” avant la certification radio signifie que le produit est compatible avec le spécification Industrie Canada.The use of RLAN’s, for use through the EEA, have the following restrictions:• Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 - 2.4835 GHz.• 5150 - 5350 MHz is restricted to indoor use only.Bluetooth® Wireless Technology for use through the EEA has the following restrictions:• Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400 - 2.4835 GHz.CAUTION Only use Zebra approved and UL Listed accessories, battery packs and battery chargers.Do NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry before connecting to an external power source.Declared maximum operating temperature: 50°C.Operation of the device without regulatory approval is illegal.CAUTION The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-Channel mobile satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices.AVERTISSEMENT Le dispositive fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux. Les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les bands 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.CAUTION In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your company's safety programs to prevent employee injury.NOTE Connection to an alert device that will cause a vehicle horn to sound or lights to flash on receipt of a call on public roads is not permitted.IMPORTANT Before installing or using, check state and local laws regarding windshield mounting and use of equipment.CAUTION Please observe all warning notices with regard to the usage of wireless devices.Safety in HospitalsRF Exposure GuidelinesLaser DevicesCAUTION Use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous laser light exposure.CAUTION- CLASS 2 LASER LIGHT WHEN OPEN. DO NOT STARE INTO THE BEAM.ATTENTION- LUMIÉRE LASER DE CLASSE 2 EN CAS D'OUVERTURE.NE PAS REGARDER DANS LE FAISCEAU.VORSICHT- LASERLICHT KLASSE 2,WENN ABDECKUNG GEÖFFNET. NICHT IN DEN STRAHL BLICKEN.321COMPLIES WITH 21CFR1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS PURSUANT TO LASER NOTICE NO. 50, DATED JUNE 24, 2007 AND IEC/EN 60825-1:2014 CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of batteries according to instructions.Marking and European Economic Area (EEA)Review Copy
Statement of ComplianceZebra hereby declares that this radio equipment is in compliance with Directive 2011/65/EU and 1999/5/EC or 2014/53/EU (2014/53/EU supersedes 1999/5/EC from 13th June 2017). The full text of the EU Declaration of Conformity is available at the following internet address: http://www.zebra.com/doc.Other CountriesAustraliaUse of 5GHz RLAN’s in Australia is restricted in the following band 5.50 – 5.65GHz.Brazil (UNWANTED EMISSIONS - ALL PRODUCTS)Declarações Regulamentares para TC700K - BrazilNota: A marca de certificação se aplica ao Transceptor, modelo TC700K. Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.Este produto está homologado pela Anatel, de acordo com os procedimentos regulamentados pela Resolução n°242/2000 e atende aos requisitos técnicos aplicados, incluindo os limites de exposição da Taxa de Absorção Específica referente a campos elétricos, magnéticos e eletromagnéticos de radiofrequência, de acordo com as Resoluções n° 303/2002 e 533/2009.Este dispositivo está em conformidade com as diretrizes de exposição à radiofrequência quando posicionado pelo menos X centímetros de distância do corpo. Para maiores informações, consulte o site da Anatel.ChileEste equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria de telecomunicaciones, relativa a radiaciones electromagnéticas.Conforme a Resolución 755 parte j.1), se ajustará el dispositivo a operar en interiores en las siguientes bandas con una potencia máxima radiada no superior a 150mW:• 2.400 hasta 2.483,5 MHz• 5.150 hasta 5.250MHz• 5.250 hasta 5.350MHz• 5.725 hasta 5.850MHzAdemás, de acuerdo con Resolución 755, para la banda 5150-5250MHz la operación del equipo estará restringida al interior de inmuebles y la densidad de potencia radiada máxima no supera 7,5mW/MHz en cualquier banda de 1MHz y 0.1875mW/25kHz en cualquier banda de 25kHz.China抩扖幎桽ⅴₚ几⧏♾ₚ戌㇢⦿幼岏㞾㖐䤓ℶ❐広㢝⃵ZZZ]HEUDFRPVXSSRUW枑䟄㻯⸘⏷巵䯉幼巵⛙᧶庆▎㕕孔᧨䩼恾᧨㜭⒊᧨㖳☚㒥劔㔤⏴䋺₼♙㻃₼᧷㽷㎞᧶Ⱁ㨫䟄㻯嬺ₜ㷲䫽⨚⚆㦎㗱᧨㒥⒉䘿熢协᧨↩ⷧ⦷䒕䍇♙␅Ⅵ☀棸庆㖘広㢝⮓函∎䞷扖䤓䟄㻯⚗㫋幐᧶Eurasian Customs Union̬͉͇͎͗͏͐͑͘͏͐̹͇͓͕͍͔͔͌͐͢̸͕͎̫͇͔͔ͥ͐͢͖͕͚͙͗͋͑͕͕͙͉͙͙͉͚͙͌͌͘͘͙͈͕͉͇͔͗͌͏͓ͦ͎͔͇͇͑($&.Hong KongIn accordance with HKTA1039, the band 5.15GHz - 5.35GHz is for indoor operation only.MexicoRestrict Frequency Range to: 2.450 – 2.4835 GHz.La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.Taiwan 咉䋲⇝┮䘖榊㽱懊⺓㊶榊㳮丰䚕戵㽤䶻◐ℛ㬬倢⨚㆞崜巘⚗㫋⃚⇝┮䘖⺓櫊榊㳮᧨槭倢峀♾᧨⏻⚇ᇬ⟕壮㒥∎䞷劔⧖ₜ㈦㝔呹帙㦃櫊䘖ᇬ┯⮶┮䘖㒥帙㦃☮岼岗⃚䔈㊶♙┮厌ᇭ䶻◐⥪㬬⇝┮䘖⺓櫊榊㳮⃚∎䞷ₜ㈦㈀檎歪咹⸘⏷♙㄁㞍⚗㽤抩≰᧷倢䤋䚍㦘㄁㞍䚍廰㣑᧨㑘䵚☂⋫䞷᧨₵㟈⠓咂䎰㄁㞍㣑㡈㈦儋儛∎䞷ᇭⓜ檔⚗㽤抩≰᧨㖖∬榊≰尞⸩⇫㯼⃚䎰偩榊抩≰ᇭ⇝┮䘖⺓櫊榊㳮檗㉜♦⚗㽤抩≰㒥ぴ㯼ᇬ䱠⸇♙携䣑䞷榊㽱懊⺓㊶榊㳮岼⌨⃚㄁㞍ᇭ⦷ 䱼忺櫊ヅ⏶㝜⇫⃚䎰偩彖岙⍂懇岼⌨᧨棟㡋⸳⏶∎䞷ᇭ䂪⺠榊䭐㽱㈀檎᧨嵚ⰴ拸∎䞷UkraineДане обладнання відповідає вимогам технічного регламенту № 1057, 2008 на обмеження щодо використання деяких небезпечних речовин в електричних та електронних пристроях.Thailandࡳ࠻࡚࡮ࡻࡤ࠾ࡵࡎ࡚࠻ࡘࡐࡩ࠻ࡘࡴ࡜ࡧࡤ࡯ࡒ࠸࡚ࡊࡿࡐ࡬ࡼࡘ࡬࠻࡞ࡩࡘࡡࡤࡋ࠻࡜ࡼࡤ࠾ࡌࡩࡘ࠹ࡼࡤ࠸ࡪࡢࡐࡋ࠹ࡤ࠾࠸ࡎࡁ (QJOLVK)RU(8&XVWRPHUV$OOSURGXFWVDWWKHHQGRIWKHLUOLIHPXVWEHUHWXUQHGWR=HEUDIRUUHF\FOLQJ)RULQIRUPDWLRQRQKRZWRUHWXUQSURGXFWSOHDVHJRWRKWWSZZZ]HEUDFRPZHHH)UDQ©DLV &OLHQWVGHO8QLRQ(XURS«HQQH7RXVOHVSURGXLWVHQILQGHF\FOHGHYLHGRLYHQW¬WUHUHWRXUQ«V¢=HEUDSRXUUHF\FODJH3RXUGHSOXVDPSOHVLQIRUPDWLRQVVXUOHUHWRXUGHSURGXLWVFRQVXOWH] KWWSZZZ]HEUDFRPZHHH(VSD³RO3DUDFOLHQWHVHQOD8QLµQ(XURSHDWRGRVORVSURGXFWRVGHEHU£QHQWUHJDUVHD=HEUDDOILQDOGHVXFLFORGHYLGDSDUDTXHVHDQUHFLFODGRV6LGHVHDP£VLQIRUPDFLµQVREUHFµPRGHYROYHUXQSURGXFWRYLVLWHKWWSZZZ]HEUDFRPZHHH%XOJDULVK̮͇͑͒͏͔͙͌͏͕͙̸̬̸͒͌͋͇͑͗ͦ͔͇͖͕͎͔͒͌͏ͦ͏͓͍͏͉͕͙͉͘͏͑͞͏͖͕͚͙͗͋͑͏ ͙͈͉͇͗ͦ ͇͋ ͌͘ ͉͇͙͗͡͠ ͔͇ =HEUD ͎͇ ͗͌͝͏͑͒͏͇͔͗͌ ̮͇ ͏͔͕͓͇͛͗͝͏͕͙͔͕͔͕ͦ͘͉͇͔͙͕͗͌͡͠͔͇͖͕͚͙͗͋͑͏͓͕͒ͦ͕͙͏͙͋͌͌͔͇͇͋͗͌͘KWWSZZZ]HEUDFRPZHHH'HXWVFK)¾U.XQGHQLQQHUKDOEGHU(8$OOH3URGXNWHP¾VVHQDP(QGHLKUHU/HEHQVGDXHU]XP5HF\FOLQJDQ=HEUD]XU¾FNJHVDQGWZHUGHQ,QIRUPDWLRQHQ]XU5¾FNVHQGXQJYRQ3URGXNWHQILQGHQ6LHXQWHUKWWSZZZ]HEUDFRPZHHH,WDOLDQRSHULFOLHQWLGHOO8(WXWWLLSURGRWWLFKHVRQRJLXQWLDOWHUPLQHGHOULVSHWWLYRFLFORGLYLWDGHYRQRHVVHUHUHVWLWXLWLD=HEUDDOILQHGLFRQVHQWLUQHLOULFLFODJJLR 3HU LQIRUPD]LRQL VXOOH PRGDOLW¢ GL UHVWLWX]LRQH YLVLWDUH LO VHJXHQWHVLWR:HEKWWSZZZ]HEUDFRPZHHH3RUWXJX¬V 3DUD FOLHQWHV GD 8( WRGRV RV SURGXWRV QR ILP GH YLGD GHYHP VHUGHYROYLGRV¢=HEUDSDUDUHFLFODJHP3DUDREWHULQIRUPD©·HVVREUHFRPRGHYROYHURSURGXWRYLVLWHKWWSZZZ]HEUDFRPZHHH1HGHUODQGV 9RRU NODQWHQ LQ GH (8 DOOH SURGXFWHQ GLHQHQ DDQ KHW HLQGH YDQKXQOHYHQVGXXUQDDU=HEUDWHZRUGHQWHUXJJH]RQGHQYRRUUHF\FOLQJ5DDGSOHHJKWWSZZZ]HEUDFRPZHHHYRRUPHHULQIRUPDWLHRYHUKHWWHUXJ]HQGHQYDQSURGXFWHQ3ROVNL .OLHQFL ] REV]DUX 8QLL (XURSHMVNLHM 3URGXNW\ Z\FRIDQH ] HNVSORDWDFMLQDOHľ\]ZUµFLÉGRILUP\=HEUDZFHOXLFKXW\OL]DFML,QIRUPDFMHQDWHPDW]ZURWXSURGXNWµZ]QDMGXMÇVLÛQDVWURQLHLQWHUQHWRZHMKWWSZZZ]HEUDFRPZHHHÎHƢWLQD 3UR]£ND]Q¯N\] (89ģHFKQ\SURGXNW\MHQXWQ«SRVNRQªHQ¯MHMLFKŀLYRWQRVWLYU£WLWVSROHªQRVWL=HEUDN UHF\NODFL,QIRUPDFHR]S»VREXYU£FHQ¯SURGXNWXQDMGHWHQDZHERY«VWU£QFHKWWSZZZ]HEUDFRPZHHH(HVWL (/NOLHQWLGHOHN·LNWRRWHGWXOHEQHQGHHOXHDO·SSHGHVWDJDVWDGDWDDVNDVXWDPLVHHHVP¦UJLO=HEUDLOH/LVDLQIRUPDWVLRRQLVDDPLVHNVWRRWHWDJDVWDPLVHNRKWDN¾ODVWDJHSDOXQDDGUHVVLKWWSZZZ]HEUDFRPZHHH0DJ\DU $](8EDQY£V£UOµNQDN0LQGHQW¸QNUHPHQWWHUP«NHWD=HEUDY£OODODWKR]NHOOHOMXWWDWQL¼MUDKDV]QRV¯W£VF«OM£EµO$WHUP«NYLVV]DMXWWDW£V£QDNPµGM£YDONDSFVRODWRVWXGQLYDOµN«UWO£WRJDVVRQHODKWWSZZZ]HEUDFRPZHHHZHEROGDOUD6YHQVND )¸UNXQGHULQRP(8$OODSURGXNWHUVRPXSSQ§WWVLQOLYVO¦QJGP§VWHUHWXUQHUDVWLOO=HEUDI¸U§WHUYLQQLQJ,QIRUPDWLRQRPKXUGXUHWXUQHUDUSURGXNWHQILQQVS§KWWSZZZ]HEUDFRPZHHH6XRPL $VLDNNDDW (XURRSDQ XQLRQLQ DOXHHOOD .DLNNL WXRWWHHW RQ SDODXWHWWDYDNLHUU¦WHWW¦Y¦NVL=HEUD\KWL¸¸QNXQWXRWHWWDHLHQ¦¦N¦\WHW¦/LV¦WLHWRMDWXRWWHHQSDODXWWDPLVHVWDRQRVRLWWHHVVDKWWSZZZ]HEUDFRPZHHH'DQVN 7LONXQGHUL(8$OOHSURGXNWHUVNDOUHWXUQHUHVWLO=HEUDWLOUHFLUNXOHULQJQ§UGHHUXGWMHQW/¨VRSO\VQLQJHUQHRPUHWXUQHULQJDISURGXNWHUS§KWWSZZZ]HEUDFRPZHHHΔιιεληθΪˁ˦˞˭ˢ˨˙˱ˢ˯˰˱ˤ˪˃˃ʻ˨˞˱˞˭ˮˬ˷˹˪˱˞˰˱ˬ˱˚˨ˬ˯˱ˤ˯ˡ˦˙ˮ˧ˢ˦˞˯ˣ˶˛˯˱ˬ˲˯˭ˮ˚˭ˢ˦˪˞ˢ˭˦˰˱ˮ˚˳ˬ˪˱˞˦˰˱ˤ˪=HEUDˠ˦˞˞˪˞˧˺˧˨˶˰ˤˁ˦˞˭ˢˮ˦˰˰˹˱ˢˮˢ˯˭˨ˤˮˬ˳ˬˮ˜ˢ˯˰˴ˢ˱˦˧˙˩ˢ˱ˤ˪ˢ˭˦˰˱ˮˬ˳˛ˢ˪˹˯˭ˮˬ˷˹˪˱ˬ˯ˢ˭˦˰˧ˢ˳˥ˢ˜˱ˢ˱ˤˡ˦ˢ˺˥˲˪˰ˤKWWSZZZ]HEUDFRPZHHH˰˱ˬ˂˦˞ˡ˜˧˱˲ˬ0DOWL *éDONOLMHQWLIO8(LOSURGRWWLNROOKDOLMNXQXZDVOXIODééDUWDOéDMMDWDOXľXWDJéKRPLULGXMLãXUULWRUQDWLJéDQG=HEUDJéDUULÍLNODãã*éDODNWDUWDJéULIGZDUNLIJéDQGHNWLUULWRUQDOSURGRWWMHNNMRJéãERNľXUKWWSZZZ]HEUDFRPZHHH5RP¤QHVF 3HQWUX FOLHQĥLL GLQ 8( 7RDWH SURGXVHOH OD VI¤UġLWXO GXUDWHL ORU GHIXQFĥLRQDUHWUHEXLHUHWXUQDWHOD=HEUDSHQWUXUHFLFODUH3HQWUXLQIRUPDĥLLGHVSUHUHWXUQDUHDSURGXVXOXLDFFHVDĥLKWWSZZZ]HEUDFRPZHHH6ORYHQVNL=DNXSFHY(8YVLL]GHONLVHPRUDMRSRSRWHNXŀLYOMHQMVNHGREHYUQLWLSRGMHWMX=HEUD]DUHFLNODŀR=DLQIRUPDFLMHRYUDÏLOXL]GHONDRELģÏLWHKWWSZZZ]HEUDFRPZHHH6ORYHQÏLQD3UH]£ND]Q¯NRY]NUDM¯Q(89ģHWN\Y¿UREN\PXVLDE\ħSRXSO\QXW¯GRE\LFKŀLYRWQRVWLYU£WHQ«VSRORÏQRVWL=HEUDQDUHF\NO£FLX%OLŀģLHLQIRUP£FLHRYU£WHQ¯Y¿URENRYQ£MGHWHQDKWWSZZZ]HEUDFRPZHHH/LHWXYLƴ(6YDUWRWRMDPVYLVLJDPLQLDLSDVLEDLJXVMĵHNVSORDWDFLMRVODLNXLWXULEĭWLJUÇŀLQWLXWLOL]XRWLñNRPSDQLMÇಱ=HEUDಯ'DXJLDXLQIRUPDFLMRVNDLSJUÇŀLQWLJDPLQñUDVLWHKWWSZZZ]HEUDFRPZHHH/DWYLHƢX(6NOLHQWLHPYLVLSURGXNWLSÕFWRNDOSRģDQDVPĭŀDEHLJÃPLUMÃQRJÃGÃDWSDNDþ=HEUDRWUUHL]ÕMDLSÃUVWUÃGHL/DLLHJĭWXLQIRUPÃFLMXSDUSURGXNWXQRJÃGÃģDQX=HEUDOĭG]XVNDWLHWKWWSZZZ]HEUDFRPZHHH7¾UN©H $%0¾ġWHULOHULL©LQ.XOODQóPV¾UHVLGRODQW¾P¾U¾QOHUJHULG¸Q¾ġW¾UPHL©LQ=HEUD\DLDGHHGLOPHOLGLUU¾QOHULQQDVóOLDGHHGLOHFHáLKDNNóQGDELOJLL©LQO¾WIHQġXDGUHVL]L\DUHWHGLQKWWSZZZ]HEUDFRPZHHH+UYDWVNL=DNXSFHX(XURSVNRMXQLML6YLVHSURL]YRGLSRLVWHNXYLMHNDWUDMDQMDPRUDMXYUDWLWLWYUWNL=HEUDQDUHFLNOLUDQMH,QIRUPDFLMHRQDÏLQXYUDÉDQMDSURL]YRGDSRWUDŀLWHQDZHEVWUDQLFLKWWSZZZ]HEUDFRPZHHHTurkish WEEE Statement of ComplianceEEE Yönetmeliğine Uygundur.End User License AgreementIMPORTANT PLEASE READ CAREFULLY: This End User License Agreement (“EULA”) is a legal agreement between you (either an individual or a single entity) (“Licensee”) and Zebra International Holdings Corporation (“Zebra”) for software, owned by Zebra and its affiliated companies and its third party suppliers and licensors, that accompanies this EULA, which includes machine-readable instructions used by a processor to perform specific operations other than machine-readable instructions used for the sole purpose of booting hardware during a startup sequence (“Software”). BY USING THE SOFTWARE, YOU ACKNOWLEDGE ACCEPTANCE OF THE TERMS OF THIS EULA. IF YOU DO NOT ACCEPT THESE TERMS, DO NOT USE THE SOFTWARE. 1. GRANT OF LICENSE. Zebra grants you, End-User Customer, the following rights provided that you comply with all terms and conditions of this EULA: For Software associated with Zebra hardware, Zebra hereby grants you a limited, personal, non-exclusive license during the term of this Agreement to use the Software solely and exclusively for your internal use in support of the operation of your associated Zebra hardware and for no other purpose. To the extent that any portion of the Software is provided to you in a manner that is designed to be installed by you, you may install one copy of the installable Software on one hard disk or other device storage for one printer, computer, workstation, terminal, controller, access point or other digital electronic device, as applicable (an “Electronic Device”), and you may access and use that Software as installed on that Electronic Device so long as only one copy of such Software is in operation. For a standalone Software application, you may install, use, access, display and run only the number of copies of the Software to which you are entitled. You may make one copy of the Software in machine readable form for backup purposes only, provided that the backup copy must include all copyright or other proprietary notices contained on the original. In the absence of a support contract, you are entitled, for a period of ninety (90) days from when the instance of Software (or hardware including the Software) are first shipped by Zebra or downloaded by End-User Customer, to obtain, if available, updates, from Zebra and operational technical support, not including implementation, integration or deployment support (“Entitlement Period”). You may not obtain updates from Zebra after the Entitlement Period, unless covered by a Zebra support contract or other written agreement with Zebra.Certain items of the Software may be subject to open source licenses. The open source license provisions may override some of the terms of this EULA. Zebra makes the applicable open source licenses available to you on a Legal Notices readme file available on your device and/or in System Reference guides or in Command Line Interface (CLI) Reference guides associated with certain Zebra products. 1.1 Authorized Users. For a standalone Software application, the licenses granted are subject to the condition that you ensure the maximum number of authorized users accessing and using the Software either alone or concurrently is equal to the number of user licenses for which you are entitled to use either through a Zebra channel partner member or Zebra. You may purchase additional user licenses at any time upon payment of the appropriate fees to the Zebra channel partner member or Zebra.1.2 Software Transfer. You may only transfer this EULA and the rights to the Software or updates granted herein to a third party in connection with the support or sale of a device which the Software accompanied or in connection with a standalone Software application during the Entitlement Period or as covered by a Zebra support contract. In such event, the transfer must include all of the Software (including all component parts, the media and printed materials, any upgrades, and this EULA) and you may not retain any copies of the Software. The transfer may not be an indirect transfer, such as a consignment. Prior to the transfer, the end user receiving the Software must agree to all the EULA terms. If Licensee is purchasing Zebra Products and licensing Software for end use by a U.S. Government end user, Licensee may transfer such Software license, but only if: (i) Licensee transfers all copies of such Software to the U.S. Government end user or to an interim transferee, and (ii) Licensee has first obtained from the transferee (if applicable) and ultimate end user an enforceable end user license agreement containing restrictions substantially identical to the ones contained in this Agreement. Except as stated in the foregoing, Licensee and any transferee(s) authorized by this provision may not otherwise use or transfer or make available any Zebra software to any third party nor permit any party to do so.2. RESERVATION OF RIGHTS AND OWNERSHIP. Zebra reserves all rights not expressly granted to you in this EULA. The Software is protected by copyright and other intellectual property laws and treaties. Zebra or its suppliers own the title, copyright and other intellectual property rights in the Software. The Software is licensed, not sold. 3. LIMITATIONS ON END USER RIGHTS. You may not reverse engineer, decompile, disassemble, or otherwise attempt to discover the source code or algorithms of, the Software (except and only to the extent that such activity is expressly permitted by applicable law not withstanding this limitation), or modify, or disable any features of, the Software, or create derivative works based on the Software. You may not rent, lease, lend, sublicense or provide commercial hosting services with the Software. 4. CONSENT TO USE OF DATA. You agree that Zebra and its affiliates may collect and use technical information gathered as part of the product support services related to the Software provided to you that does not personally identify you. Zebra and its affiliates may use this information solely to improve their products or to provide customized services or technologies to you. At all times your information will be treated in accordance with Zebra's Privacy Policy, which can be viewed at: http://www.zebra.com.5. LOCATION INFORMATION. The Software may enable you to collect location-based data from one or more client devices which may allow you to track the actual location of those client devices. Zebra specifically disclaims any liability for your use or misuse of the location-based data. You agree to pay all reasonable costs and expenses of Zebra arising from or related to third party claims resulting from your use of the location-based data. 6. SOFTWARE RELEASES. During the Entitlement Period, Zebra or Zebra's channel partner members may make available to you software releases as they become available after the date you obtain your initial copy of the Software. This EULA applies to all and any component of the release that Zebra may make available to you after the date you obtain your initial copy of the Software, unless Zebra provides other license terms along with such release. To receive Software provided through the release, you must first be licensed for the Software identified by Zebra as entitled to the release. We recommend that you periodically check availability of a Zebra support contract to ensure that you are entitled to receive any available Software releases. Some features of the Software may require you to have access to the internet and may be subject to restrictions imposed by your network or internet provider. 7. EXPORT RESTRICTIONS. You acknowledge that the Software is subject to export restrictions of various countries. You agree to comply with all applicable international and national laws that apply to the Software, including all the applicable export restriction laws and regulations. 8. ASSIGNMENT. You may not assign this Agreement or any of your rights or obligations hereunder (by operation of law or otherwise) without the prior written consent of Zebra. Zebra may assign this Agreement and its rights and obligations without your consent. Subject to the foregoing, this Agreement shall be binding upon and inure to the benefit of the parties to it and their respective legal representatives, successors and permitted assigns.9. TERMINATION. This EULA is effective until terminated. Your rights under this License will terminate automatically without notice from Zebra if you fail to comply with any of the terms and conditions of this EULA. Zebra may terminate this Agreement by offering you a superseding Agreement for the Software or for any new release of the Software and conditioning your continued use of the Software or such new release on your acceptance of such superseding Agreement. Upon termination of this EULA, you must cease all use of the Software and destroy all copies, full or partial, of the Software. 10. DISCLAIMER OF WARRANTY. UNLESS SEPARATELY STATED IN A WRITTEN EXPRESS LIMITED WARRANTY, ALL SOFTWARE PROVIDED BY ZEBRA IS PROVIDED “AS IS” AND ON AN “AS AVAILABLE” BASIS, WITHOUT WARRANTIES OF ANY KIND FROM ZEBRA, EITHER EXPRESS OR IMPLIED. TO THE FULLEST EXTENT POSSIBLE PURSUANT TO APPLICABLE LAW, ZEBRA DISCLAIMS ALL WARRANTIES EXPRESS, IMPLIED, OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, SATISFACTORY QUALITY OR WORKMANLIKE EFFORT, FITNESS FOR A PARTICULAR PURPOSE, RELIABILITY OR AVAILABILITY, ACCURACY, LACK OF VIRUSES, NON INFRINGEMENT OF THIRD PARTY RIGHTS OR OTHER VIOLATION OF RIGHTS. ZEBRA DOES NOT WARRANT THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR FREE. TO THE EXTENT THAT THE SOFTWARE COVERED BY THIS EULA INCLUDES EMULATION LIBRARIES, SUCH EMULATION LIBRARIES DO NOT WORK 100% CORRECTLY OR COVER 100% OF THE FUNCTIONALITY BEING EMULATED, ARE OFFERED “AS IS” AND WITH ALL FAULTS, AND ALL THE DISCLAIMERS AND LIMITATIONS CONTAINED IN THIS PARAGRAPH AND THIS AGREEMENT APPLY TO SUCH EMULATION LIBRARIES. SOME JURISDICTIONS DO NOT ALLOW EXCLUSIONS OR LIMITATIONS OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. NO ADVICE OR INFORMATION, WHETHER ORAL OR WRITTEN, OBTAINED BY YOU FROM ZEBRA OR ITS AFFILIATES SHALL BE DEEMED TO ALTER THIS DISCLAIMER BY ZEBRA OF WARRANTY REGARDING THE SOFTWARE, OR TO CREATE ANY WARRANTY OF ANY SORT FROM ZEBRA. 11. THIRD-PARTY APPLICATIONS. Certain third party applications may be included with, or downloaded with this Software. Zebra makes no representations whatsoever about any of these applications. Since Zebra has no control over such applications, you acknowledge and agree that Zebra is not responsible for such applications. You expressly acknowledge and agree that use of third party applications is at your sole risk and that the entire risk of unsatisfactory quality, performance, accuracy and effort is with you. You agree that Zebra shall not be responsible or liable, directly or indirectly, for any damage or loss, including but not limited to any damage to or loss of data, caused or alleged to be caused by, or in connection with, use of or reliance on any such third party content, products, or services available on or through any such application. You acknowledge and agree that the use of any third-party application is governed by such third party application provider's Terms of Use, License Agreement, Privacy Policy, or other such agreement and that any information or personal data you provide, whether knowingly or unknowingly, to such third-party application provider, will be subject to such third party application provider's privacy policy, if such a policy exists. ZEBRA DISCLAIMS ANY RESPONSIBILITY FOR ANY DISCLOSURE OF INFORMATION OR ANY OTHER PRACTICES OF ANY THIRD PARTY APPLICATION PROVIDER. ZEBRA EXPRESSLY DISCLAIMS ANY WARRANTY REGARDING WHETHER YOUR PERSONAL INFORMATION IS CAPTURED BY ANY THIRD PARTY APPLICATION PROVIDER OR THE USE TO WHICH SUCH PERSONAL INFORMATION MAY BE PUT BY SUCH THIRD PARTY APPLICATION PROVIDER. 12. LIMITATION OF LIABILITY. ZEBRA WILL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND ARISING OUT OF OR RELATING TO THE USE OR THE INABILITY TO USE THE SOFTWARE OR ANY THIRD PARTY APPLICATION, ITS CONTENT OR FUNCTIONALITY, INCLUDING BUT NOT LIMITED TO DAMAGES CAUSED BY OR RELATED TO ERRORS, OMISSIONS, INTERRUPTIONS, DEFECTS, DELAY IN OPERATION OR TRANSMISSION, COMPUTER VIRUS, FAILURE TO CONNECT, NETWORK CHARGES, IN-APP PURCHASES, AND ALL OTHER DIRECT, INDIRECT, SPECIAL, INCIDENTAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES EVEN IF ZEBRA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. NOTWITHSTANDING THE FOREGOING, ZEBRA'S TOTAL LIABILITY TO YOU FOR ALL LOSSES, DAMAGES, CAUSES OF ACTION, INCLUDING BUT NOT LIMITED TO THOSE BASED ON CONTRACT, TORT, OR OTHERWISE, ARISING OUT OF YOUR USE OF THE SOFTWARE OR THIRD PARTY APPLICATIONS, OR ANY OTHER PROVISION OF THIS EULA, SHALL NOT EXCEED THE FAIR MARKET VALUE OF THE SOFTWARE OR AMOUNT PURCHASER PAID SPECIFICALLY FOR THE SOFTWARE. THE FOREGOING LIMITATIONS, EXCLUSIONS, AND DISCLAIMERS (INCLUDING SECTIONS 10, 11, 12, AND 15) SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY FAILS ITS ESSENTIAL PURPOSE. 13. INJUNCTIVE RELIEF. You acknowledge that, in the event you breach any provision of this Agreement, Zebra will not have an adequate remedy in money or damages. Zebra shall therefore be entitled to obtain an injunction against such breach from any court of competent jurisdiction immediately upon request without posting bond. Zebra's right to obtain injunctive relief shall not limit its right to seek further remedies.14. MODIFICATION. No modification of this Agreement shall be binding unless it is in writing and is signed by an authorized representative of the party against whom enforcement of the modification is sought.15. U.S. GOVERNMENT END USERS RESTRICTED RIGHTS. This provision only applies to U.S. Government end users. The Software is a "commercial item" as that term is defined at 48 C.F.R. Part 2.101, consisting of “commercial computer software” and “computer software documentation” as such terms are defined in 48 C.F.R. Part 252.227-7014(a)(1) and 48 C.F.R. Part 252.227-7014(a)(5), and used in 48 C.F.R. Part 12.212 and 48 C.F.R. Part 227.7202, as applicable. Consistent with 48 C.F.R. Part 12.212, 48 C.F.R. Part 252.227-7015, 48 C.F.R. Part 227.7202-1 through 227.7202-4, 48 C.F.R. Part 52.227-19, and other relevant sections of the Code of Federal Regulations, as applicable, the Software is distributed and licensed to U.S. Government end users (a) only as a commercial item, and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions contained herein. 16. APPLICABLE LAW. This EULA is governed by the laws of the stateof Illinois, without regard to its conflict of law provisions. This EULA shall not be governed by the UN Convention on Contracts for the Interna-tional Sale of Goods, the application of which is expressly excluded.Software SupportZebra wants to ensure that customers have the latest entitled software at the time of device purchase in order to keep the device operating at peak performance levels. To confirm that your Zebra device has the latest entitled software available at the time of purchase, visit http://www.zebra.com/support.Check for the latest software from Support > Products, or search for the device and select Support > Software Downloads.If your device does not have the latest entitled software as of your device purchase date, e-mail Zebra at entitlementservices@zebra.com and ensure you include the following essential device information:• Model number• Serial number• Proof of purchase• Title of the software download you are requesting.If it is determined by Zebra that your device is entitled to the latest version of software, as of the date you purchased your device, you will receive an e-mail containing a link directing you to a Zebra Web site to download the appropriate software.CMM Disclosure㦻嫷㫋∬㗽 6-7䤓屓⸩冥Ⓟᇭ2嫷䯉年㦘⹂䓸德⦷年捷ↅ㓏㦘⧖德㧟㠨₼䤓⚺摞⧖⦷*%7屓⸩䤓棟摞尐㻑ⅴₚᇭ; 嫷䯉年㦘⹂䓸德咂⺠⦷年捷ↅ䤓㩟₏⧖德㧟㠨₼䤓⚺摞怔⒉*%7屓⸩䤓棟摞尐㻑ᇭ←₩♾⦷㷳⮓᧨㫈㗽⸭棔㍔⑄⺈ₙ嫷₼㓢ಯರ䤓㔏㦾☮⥯扪嫛扪₏㷴広㢝ᇭ᧥This table was created to comply with China RoHS requirements.⚗㫋幐Waste Electrical and Electronic Equipment (WEEE)䜞Ԭ੃〦(Parts) ᴿᇩ⢟䍞䫻(Pb)⊔(Hg)䭿(Cd)ޣԭ䬢(Cr(VI))ཐ⓪㚊㤥(PBB)ཐ⓪ӂ㤥䟐(PBDE)䠇ኔ䜞Ԭ(Metal Parts)XOO O O O⭫䐥⁗ඍ(Circuit Modules)XOO O O O⭫㔼਀⭫㔼㓺Ԭ(Cables and Cable Assemblies)OOO O O Oງᯏૂ㚐ਾ⢟䜞Ԭ(Plastic and Polymeric Parts)OOO O O Oݿᆜૂݿᆜ㓺Ԭ(Optics and Optical Components)OOO O O O⭫⊖(Batteries)OOO O O OReview Copy

Navigation menu