Zebra Technologies WT6000 Wearable Terminal User Manual WT6000 Regualtory Guide en
Zebra Technologies Corporation Wearable Terminal WT6000 Regualtory Guide en
Contents
- 1. User Manual (Installation) rev 2 Part 1.pdf
- 2. User Manual (Installation) rev 2 Part 2.pdf
- 3. User Manual (Statements).pdf
User Manual (Statements).pdf
Wearable Computer
Zebra reserves the right to make changes to any product to
improve reliability, function, or design. Zebra does not assume
any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application
described herein. No license is granted, either expressly or by
implication, estoppel, or otherwise under any patent right or
patent, covering or relating to any combination, system,
apparatus, machine, material, method, or process in which
Zebra products might be used. An implied license exists only for
equipment, circuits, and subsystems contained in Zebra
products.
WT6000
Regulatory Guide
MN-002701-01 Revision A — April 2016
Zebra Technologies Corporation
Lincolnshire, IL USA
http://www.zebra.com
Zebra and the stylized Zebra head are trademarks of ZIH Corp.,
registered in many jurisdictions worldwide. All other trademarks
are the property of their respective owners.
© 2016 Symbol Technologies LLC, a subsidiary of Zebra
Technologies Corporation. All rights reserved.
Regulatory Information
This device is approved under Zebra Technologies Corporation.
This guide applies to the following Model Number: WT6000.
All Zebra devices are designed to be compliant with rules and
regulations in locations they are sold and will be labeled as
required.
Local language translations are available at the following
website: www.zebra.com/support.
Any changes or modifications to Zebra equipment, not expressly
approved by Zebra, could void the user’s authority to operate
the equipment.
Bluetooth® Wireless Technology
This is an approved Bluetooth® product. For more information or
to view End Product Listing, please visit
https://www.bluetooth.org/tpg/listings.cfm
Wireless Device Country
Approvals
Regulatory markings subject to certification are applied to the
device signifying the radio(s) is/are approved for use in the
following countries and continents: United States, Canada,
Japan, China, South Korea, Australia, and Europe.
Please refer to the Declaration of Conformity (DoC) for details of
other country markings. This is available at:
http://www.zebra.com/doc.
Note: Europe includes Austria, Belgium, Bulgaria, Croatia,
Czech Republic, Cyprus, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia,
Spain, Sweden, Switzerland, and the United Kingdom.
Country Roaming
This device incorporates the International Roaming feature
(IEEE802.11d) which will ensure the product operates on the
correct channels for the particular country of use.
Ad-Hoc Operation (2.4 GHz Band)
Ad-Hoc operation is limited to Channels 1-11 (2412 - 2462
MHz).
Frequency of Operation - FCC and IC
5 GHZ Only
Industry Canada Statement
Health and Safety
Recommendations
Ergonomic Recommendations
•
Reduce or eliminate repetitive motion
•
Maintain a natural position
•
Reduce or eliminate excessive force
•
Keep objects that are used frequently within easy reach
•
Perform tasks at correct heights
•
Reduce or eliminate vibration
•
Reduce or eliminate direct pressure
•
Provide adjustable workstations
•
Provide adequate clearance
•
Provide a suitable working environment
•
Improve work procedures.
Vehicle Installation
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles (including safety
systems). Check with the manufacturer or its representative
regarding your vehicle. You should also consult the
manufacturer about any equipment that has been added to your
vehicle.
An air bag inflates with great force. DO NOT place objects,
including either installed or portable wireless equipment, in the
area over the air bag or in the air bag deployment area. If in-
vehicle wireless equipment is improperly installed and the air
bag inflates, serious injury could result.
Position the device within easy reach. Be able to access the
device without removing your eyes from the road.
For Safe installation
•
Do not put your phone in a location that obstructs the drivers
vision or interferes with the operation of the Vehicle.
•
Do not cover an airbag.
Safety on the Road
Do not take notes or use the device while driving. Jotting down a
“to do” list or flipping through your address book takes attention
away from your primary responsibility, driving safely.
When driving a car, driving is your first responsibility - Give full
attention to driving. Check the laws and regulations on the use
of wireless devices in the areas where you drive. Always obey
them.
When using a wireless device behind the wheel of a car, practice
good common sense and remember the following tips:
1. Get to know your wireless device and any features such as
speed dial and redial. If available, these features help you to
place your call without taking your attention off the road.
2. When available, use a hands free device.
3. Let the person you are speaking with know you are driving; if
necessary, suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, ice, and even heavy
traffic can be hazardous.
4. Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try to
plan calls when your car will be stationary. If you need to
make a call while moving, dial only a few numbers, check the
road and your mirrors, then continue.
5. Do not engage in stressful or emotional conversations that
may be distracting. Make people you are talking with aware
you are driving and suspend conversations that have the
potential to divert your attention from the road.
6. Use your wireless phone to call for help. Dial the Emergency
services, (9-1-1 in the US, and 1-1-2 in Europe) or other local
emergency number in the case of fire, traffic accident or
medical emergencies. Remember, it is a free call on your
wireless phone! The call can be made regardless of any
security codes and depending on a network, with or without
a SIM card inserted.
7. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other serious
emergency where lives are in danger, call the Emergency
Services, (9-1-1 in the US, and 1-1-2 in Europe) or other
local emergency number, as you would want others to do for
you.
8. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see a
broken-down vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where no one appears
injured, or a vehicle you know to be stolen, call roadside
assistance or other special non-emergency wireless number.
“The wireless industry reminds you to use your device / phone
safely when driving”.
Warnings for Use of Wireless Devices
Potentially Hazardous Atmospheres –
Vehicles Use
You are reminded of the need to observe restrictions on the use
of radio devices in fuel depots, chemical plants etc. and areas
where the air contains chemicals or particles (such as grain,
dust, or metal powders) and any other area where you would
normally be advised to turn off your vehicle engine.
Safety in Aircraft
Switch off your wireless device whenever you are instructed to
do so by airport or airline staff. If your device offers a ‘flight
mode’ or similar feature, consult airline staff as to its use in flight.
Wireless devices transmit radio frequency energy and may
affect medical electrical equipment.
Wireless devices should be switched off wherever you are
requested to do so in hospitals, clinics or healthcare facilities.
These requests are designed to prevent possible interference
with sensitive medical equipment.
Pacemakers
Pacemaker manufacturers recommended that a minimum of 15
cm (6 inches) be maintained between a handheld wireless
device and a pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent with
independent research and recommendations by Wireless
Technology Research.
Persons with Pacemakers:
•
Should ALWAYS keep the device more than 15 cm
(6 inches) from their pacemaker when turned ON.
•
Should not carry the device in a breast pocket.
•
Should use the ear furthest from the pacemaker to minimize
the potential for interference.
•
If you have any reason to suspect that interference is taking
place, turn OFF your device.
Other Medical Devices
Please consult your physician or the manufacturer of the
medical device, to determine if the operation of your wireless
product may interfere with the medical device.
Safety Information
Reducing RF Exposure – Use Properly
Only operate the device in accordance with the instructions
supplied.
International
The device complies with internationally recognized standards
covering human exposure to electromagnetic fields from radio
devices. For information on “International” human exposure to
electromagnetic fields refer to the Zebra Declaration of
Conformity (DoC) at http://www.zebra.com/doc.
For further information on the safety of RF energy from wireless
devices, see http://responsibility.zebra.com/index.php/
downloads/, which is located under Wireless Communications
and Health.
Europe
•
Handheld Devices
This device was tested for typical body-worn operation. Use
only Zebra tested and approved belt-clips, holsters, and
similar accessories to ensure EU Compliance.
US and Canada
•
Phones (placed to ear or used with headset)
Use only Zebra tested and approved belt clips, holsters, and
similar accessories to ensure FCC Compliance. The use of
third-party belt clips, holsters, and similar accessories may
not comply with FCC RF exposure compliance requirements
and should be avoided. The FCC has granted an Equipment
Authorization for these model phones with all reported SAR
levels evaluated as in compliance with the FCC RF emission
guidelines. SAR information on these model phones is on file
with the FCC and can be found under the Display Grant
section of http://www.fcc.gov/oet/ea/fccid.
•
Co-located statement
To comply with FCC RF exposure compliance requirement,
the antenna used for this transmitter must not be co-located
or operating in conjunction with any other transmitter/
antenna except those already approved in this filling.
•
Handheld Devices
This device was tested for typical body-worn operation. Use
only Zebra tested and approved belt-clips, holsters, and
similar accessories to ensure FCC Compliance. The use of
third-party belt-clips, holsters, and similar accessories may
not comply with FCC RF exposure compliance requirements,
and should be avoided.
To satisfy US and Canadian RF exposure requirements, a
transmitting device must operate with a minimum separation
distance of 1.8 cm or more from a person's body.
Pour satisfaire aux exigences Américaines et Canadiennes
d'exposition aux radio fréquences, un dispositif de
transmission doit fonctionner avec une distance de
séparation minimale de 1.8 cm ou plus de corps d'une
personne.
Power Supply
Use ONLY an approved UL LISTED ITE (IEC/EN 60950-1, LPS/
SELV) power supply with electrical ratings: Output 5.4 VDC, min
2 A, with a maximum ambient temperature of at least 50°C. Use
of alternative power supply will invalidate any approvals given to
this unit and may be dangerous.
Batteries
Taiwan - Recycling
EPA (Environmental Protection
Administration) requires dry battery
producing or importing firms in
accordance with Article 15 of the
Waste Disposal Act are required to
indicate the recycling marks on the
batteries used in sales, giveaway or promotion. Contact a
qualified Taiwanese recycler for proper battery disposal.
Battery Information
Use only Zebra approved batteries. Accessories which have
battery charging capability are approved for use with the
following battery models:
•
Part Number: BT000262A01 (3.6 VDC, 3350 mAh).
Zebra approved rechargeable battery packs are designed and
constructed to the highest standards within the industry.
However, there are limitations to how long a battery can operate
or be stored before needing replacement. Many factors affect
the actual life cycle of a battery pack, such as heat, cold, harsh
environmental conditions and severe drops.
When batteries are stored over six (6) months, some irreversible
deterioration in overall battery quality may occur. Store batteries
at half of full charge in a dry, cool place, removed from the
equipment to prevent loss of capacity, rusting of metallic parts
and electrolyte leakage. When storing batteries for one year or
longer, the charge level should be verified at least once a year
and charged to half of full charge.
Replace the battery when a significant loss of run time is
detected.
Standard warranty period for all Zebra batteries is one year,
regardless if the battery was purchased separately or included
as part of the mobile computer or bar code scanner. For more
information on Zebra batteries, please visit: http://
www.zebra.com/batterybasics.
Battery Safety Guidelines
•
The area in which the units are charged should be clear of
debris and combustible materials or chemicals. Particular
care should be taken where the device is charged in a non
commercial environment.
•
Follow battery usage, storage, and charging guidelines
found in the user's guide.
•
Improper battery use may result in a fire, explosion, or other
hazard.
•
To charge the mobile device battery, the battery and charger
temperatures must be between 0ºC and +40ºC (+32ºF and
+104ºF)
•
Do not use incompatible batteries and chargers. Use of an
incompatible battery or charger may present a risk of fire,
explosion, leakage, or other hazard. If you have any
questions about the compatibility of a battery or a charger,
contact Zebra support.
•
Do not disassemble or open, crush, bend or deform,
puncture, or shred.
•
Severe impact from dropping any battery-operated device on
a hard surface could cause the battery to overheat.
•
Do not short circuit a battery or allow metallic or conductive
objects to contact the battery terminals.
•
Do not modify or remanufacture, attempt to insert foreign
objects into the battery, immerse or expose to water or other
liquids, or expose to fire, explosion, or other hazard.
•
Do not leave or store the equipment in or near areas that
might get very hot, such as in a parked vehicle or near a
radiator or other heat source. Do not place battery into a
microwave oven or dryer.
•
Battery usage by children should be supervised.
•
Please follow local regulations to promptly dispose of used
re-chargeable batteries.
•
Do not dispose of batteries in fire.
•
Seek medical advice immediately if a battery has been
swallowed.
•
In the event of a battery leak, do not allow the liquid to come
in contact with the skin or eyes. If contact has been made,
wash the affected area with large amounts of water and seek
medical advice.
•
If you suspect damage to your equipment or battery, contact
Zebra support to arrange for inspection.
Radio Frequency Interference
Requirements - FCC
Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for
help.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Radio Frequency Interference Requirements -
Canada
CAN ICES-3 (B)/NMB-3(B)
Radio Transmitters
For RLAN Devices:
The use of 5 GHz RLAN’s, for use in Canada, have the following
restrictions:
•
Restricted Band 5.60 – 5.65 GHz
This device is in compliance with the NRC for Industry Canada
applicable to license-exempt radios. Use is allowed with the
following two conditions: (1) the device must not produce
interference, and (2) the device must accept any interference to
the radio even if the interference is likely to compromise
operation.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radio électrique subi
même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Label Marking: The Term “IC:” before the radio certification only
signifies that Industry Canada technical specifications were met.
The use of 2.4GHz RLAN’s, for use through the EEA, have the
following restrictions:
•
Maximum radiated transmit power of 100 mW EIRP in the
frequency range 2.400 - 2.4835 GHz.
Bluetooth® Wireless Technology for use through the EEA has
the following restrictions:
•
Maximum radiated transmit power of 100mW EIRP in the
frequency range 2.400 - 2.4835 GHz.
Statement of Compliance
Zebra hereby declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive
1999/5/EC and 2011/65/EU. A Declaration of Conformity may be
obtained from http://www.zebra.com/doc.
Japan (VCCI) - Voluntary Control Council
for Interference
Class B ITE
Korea Warning Statement for Class B ITE
Other Countries
Australia
Use of 5 GHz RLAN’s in Australia is restricted in the following
band 5.60 – 5.65 GHz.
Brazil (UNWANTED EMISSIONS - ALL PRODUCTS)
Declarações Regulamentares para WT6000 -
Brazil
Nota: A marca de certificação se aplica ao Transceptor, modelo
WT6000. Este equipamento opera em caráter secundário, isto
é, não tem direito a proteção contra interferência prejudicial,
CAUTION Only use Zebra approved and UL Listed
accessories, battery packs, and battery chargers.
Do NOT attempt to charge damp/wet mobile computers
or batteries. All components must be dry before
connecting to an external power source.
Declared maximum operating temperature: 50°C.
CAUTION Operation of the device without regulatory
approval is illegal.
CAUTION The device for the band 5150 - 5250 MHz
is only for indoor usage to reduce potential for harmful
interference to co-Channel mobile satellite systems.
High power radars are allocated as primary users
(meaning they have priority) of 5250 - 5350 MHz and
5650 - 5850 MHz and these radars could cause
interference and/or damage to LE-LAN devices.
AVERTISSEMENT The device for the band 5150 -
5250 MHz is only for indoor usage to reduce potential
for harmful interference to co-Channel mobile satellite
systems. High power radars are allocated as primary
users (meaning they have priority) of 5250 - 5350 MHz
and 5650 - 5850 MHz and these radars could cause
interference and/or damage to LE-LAN devices.
CAUTION In order to avoid or minimize the potential
risk of ergonomic injury follow the recommendations
below. Consult with your local Health & Safety
Manager to ensure that you are adhering to your
company's safety programs to prevent employee
injury.
NOTE Connection to an alert device that will cause
a vehicle horn to sound or lights to flash on receipt of
a call on public roads is not permitted.
IMPORTANT Before installing or using, check state
and local laws regarding windshield mounting and use
of equipment.
CAUTION Please observe all warning notices with
regard to the usage of wireless devices.
Safety in Hospitals
RF Exposure Guidelines
CAUTION Risk of explosion if battery is replaced by
an incorrect type. Dispose of batteries according to
instructions.
Marking and European
Economic Area (EEA)
ሶቑ孔函ቒᇬኌኖ % ㍔⫀㔏嫢孔函ቊሼᇭሶቑ孔函
ቒᇬ⹅ㄼ䜿⬒ቊ∎䞷ሼቮሶቋት䥽䤓ቋሺሧቡሼ
ሯᇬሶቑ孔函ሯንኇቧኣዉኰንዄዐ♦≰㳮扠㘴
ሺ∎䞷ሸቯቮቋᇬ♦≰椫⹂ትㆤሰ怆ሶሼሶቋሯሥ
ቭቡሼᇭ ♥㔀崻㢝㦇㈢ቆ㷲ሺሧ♥ቭ㔀ሧትሺ
ₚሸሧᇭ 9&&,%
韥눺ꙹ ꩡ끞녅껽驩ꓭ
% 鞾韥韥
閵뇊끞
ꗞꭖ뭪겕韥녅녡
넩韥韥鱉閵뇊끞 % 鞾
놹녅볁놶뼞韥韥ꈑ늱ꈑ
閵뇊꾅ꩡ끞뼍鱉阸냹ꑞ놶냱ꈑ
뼍ꐥ ꑝ麕덵꾢꾅ꩡ끞뼕ꯍ
넽걪鱽鲙
mesmo de estações do mesmo tipo, e não pode causar
interferência a sistemas operando em caráter primário.
Para maiores informações sobre ANATEL consulte o site:
http://www.anatel.gov.br
Este produto está homologado pela Anatel, de acordo com os
procedimentos regulamentados pela Resolução n°242/2000 e
atende aos requisitos técnicos aplicados, incluindo os limites de
exposição da Taxa de Absorção Específica referente a campos
elétricos, magnéticos e eletromagnéticos de radiofrequência, de
acordo com as Resoluções n° 303/2002 e 533/2009.
Este dispositivo está em conformidade com as diretrizes de
exposição à radiofrequência quando posicionado pelo menos
1.8 centímetros de distância do corpo. Para maiores
informações, consulte o site da Anatel.
Chile
Este equipo cumple con la Resolución No 403 de 2008, de la
Subsecretaria de telecomunicaciones, relativa a radiaciones
electromagnéticas.
Conforme a Resolución 755 parte j.1), se ajustará el dispositivo
a operar en interiores en las siguientes bandas con una
potencia máxima radiada no superior a 150mW:
•
2.400 hasta 2.483,5 MHz
•
5.150 hasta 5.250MHz
•
5.250 hasta 5.350MHz
•
5.725 hasta 5.850MHz
Además, de acuerdo con Resolución 755, para la banda 5150 -
5250 MHz la operación del equipo estará restringida al interior
de inmuebles y la densidad de potencia radiada máxima no
supera 7,5 mW/MHz en cualquier banda de 1 MHz y 0.1875
mW/25kHz en cualquier banda de 25 kHz.
China
抩扖幎桽ⅴₚ几⧏♾ₚ戌㇢⦿幼岏㞾㖐䤓ℶ❐広㢝
www.zebra.com/support.
撪䓝㰈⬱ℐ嬎䣢宕 :
㆙࿌㸸実⊧㉮塭炻䞕嶗炻㑆↣炻㋌⌳ㆾ侭㈽ℍ䀓ᷕ⍲㯜ᷕ烊
ὀព㸸ዴᯝ䓝㰈塓ᶵ㬋䠖✳⎟㚧㌊炻ㆾ↢䍘溻偨炻Ể⬀⛐䆮䁠⍲
℞Ṿ⌙昑
実㊱宜㖶⢬伖ἧ䓐彯䘬䓝㰈
Eurasian Customs Union
Евразийский Таможенный Союз
Данный продукт соответствует требованиям знака EAC.
Hong Kong
In accordance with HKTA1039, the band 5.15 GHz - 5.35 GHz is
for indoor operation only.
Mexico
Restrict Frequency Range to: 2.450 – 2.4835 GHz.
La operación de este equipo está sujeta a las siguientes dos
condiciones: (1) es posible que este equipo o dispositivo no
cause interferencia perjudicial y (2) este equipo o dispositivo
debe aceptar cualquier interferencia, incluyendo la que pueda
causar su operación no deseada.
South Korea
For a radio equipment using 2400 ~ 2483.5 MHz or 5725 ~
5825MHz, the following two expression should be displayed:
䟊╏ ⱨ㉔㉘⽸⏈ 㟨㟝 㩅 㤸䑀䝰㐔 ᴴ⏙㉥㢨 㢼㢀
䚨Gⱨ㉔㉘⽸⏈G㤸䑀䝰㐔Gᴴ⏙㉥㢨G㢼㡰⦐G㢬⮹㙼㤸ḰGḴ⥜
═G㉐⽸㏘⏈G䚔G㍌G㛺㏩⏼␘
Turkey
%XFLKD]7¾UN©HNDUDNWHUOHULQWDPDPóQóLKWLYDHGHQ(76,76
9YH\DVRQUDNLV¾U¾P¾QNRGXYH(76,76
9 YH\D VRQUDNL V¾U¾P¾Q NRGX WHNQLN ¸]HOOLNOHULQH
X\JXQGXU
Ukraine
Дане обладнання відповідає вимогам технічного регламенту
№ 1057, 2008 на обмеження щодо використання деяких
небезпечних речовин в електричних та електронних
пристроях.
Thailand
ࡳ࠻࡚ࡻࡤ࠾ࡵࡎ࡚࠻ࡘࡐࡩ࠻ࡘࡴࡧࡤࡒ࠸࡚ࡊࡿࡐࡼ
ࡘ࠻࡞ࡩࡘࡡࡤࡋ࠻ࡼࡤ࠾ࡌࡩࡘ࠹ࡼࡤ࠸ࡪࡢࡐࡋ࠹ࡤ࠾࠸ࡎࡁ
English: For EU Customers: All products at the end of their life
must be returned to Zebra for recycling. For information on how
to return product, please go to: http://www.zebra.com/weee.
Français: Clients de l'Union Européenne: Tous les produits en
fin de cycle de vie doivent être retournés à Zebra pour
recyclage. Pour de plus amples informations sur le retour de
produits, consultez : http://www.zebra.com/weee.
Español: Para clientes en la Unión Europea: todos los
productos deberán entregarse a Zebra al final de su ciclo de
vida para que sean reciclados. Si desea más información sobre
cómo devolver un producto, visite: http://www.zebra.com/weee.
Bulgarish: За клиенти от ЕС: След края на полезния им
живот всички продукти трябва да се връщат на Zebra за
рециклиране. За информация относно връщането на
продукти, моля отидете на адрес: http://www.zebra.com/
weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen
am Ende ihrer Lebensdauer zum Recycling an Zebra
zurückgesandt werden. Informationen zur Rücksendung von
Produkten finden Sie unter http://www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al
termine del rispettivo ciclo di vita devono essere restituiti a
Zebra al fine di consentirne il riciclaggio. Per informazioni sulle
modalità di restituzione, visitare il seguente sito Web:
http://www.zebra.com/weee.
Português: Para clientes da UE: todos os produtos no fim de
vida devem ser devolvidos à Zebra para reciclagem. Para obter
informações sobre como devolver o produto, visite: http://
www.zebra.com/weee.
Nederlands: Voor klanten in de EU: alle producten dienen aan
het einde van hun levensduur naar Zebra te worden
teruggezonden voor recycling. Raadpleeg
http://www.zebra.com/weee voor meer informatie over het
terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane
z eksploatacji naleļy zwróciÉ do firmy Zebra w celu ich utylizacji.
Informacje na temat zwrotu produktów znajdujÇ siê na stronie
internetowej http://www.zebra.com/weee.
Português: Para clientes da UE: todos os produtos no fim de
vida devem ser devolvidos à Zebra para reciclagem. Para obter
informações sobre como devolver o produto, visite: http://
www.zebra.com/weee.
Čeština: Pro zákazníky z EU: Všechny produkty je nutné po
skonèení jejich životnosti vrátit spoleènosti Zebra k recyklaci.
Informace o zpùsobu vrácení produktu najdete na webové
stránce: http://www.zebra.com/weee.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes
tagastada taaskasutamise eesmärgil Zebra'ile.
Lisainformatsiooni saamiseks toote tagastamise kohta külastage
palun aadressi: http://www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket
a Zebra vállalathoz kell eljuttatni újrahasznosítás céljából. A
termék visszajuttatásának módjával kapcsolatos tudnivalókért
látogasson el a http://www.zebra.com/weee weboldalra.
Svenska: För kunder inom EU: Alla produkter som uppnått sin
livslängd måste returneras till Zebra för återvinning. Information
om hur du returnerar produkten finns på http://www.zebra.com/
weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on
palautettava kierrätettäväksi Zebra-yhtiöön, kun tuotetta ei enää
käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa
http://www.zebra.com/weee.
Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra
til recirkulering, når de er udtjent. Læs oplysningerne om
returnering af produkter på: http://www.zebra.com/weee.
Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος
της διάρκειας ζωής τους, πρέπει να επιστρέφονται στην Zebra
για ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την
επιστροφή ενός προϊόντος, επισκεφθείτε τη διεύθυνση
http://www.zebra.com/weee στο Διαδίκτυο.
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar
tal-ħajja ta' l-użu tagħhom, iridu jiġu rritornati għand Zebra għar-
riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna l-prodott,
jekk jogħġbok żur: http://www.zebra.com/weee.
Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul
duratei lor de funcţionare, trebuie returnate la Zebra pentru
reciclare. Pentru informaţii despre returnarea produsului,
accesaţi: http://www.zebra.com/weee.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku
življenjske dobe vrniti podjetju Zebra za reciklažo. Za informacije
o vračilu izdelka obiščite: http://www.zebra.com/weee.
Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia
byť po uplynutí doby ich životnosti vrátené spoločnosti Zebra na
recykláciu. Bližšie informácie o vrátení výrobkov nájdete na:
http://www.zebra.com/weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų
eksploatacijos laikui, turi būti grąžinti utilizuoti į kompaniją
„Zebra“. Daugiau informacijos, kaip grąžinti gaminį, rasite: http://
www.zebra.com/weee.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža
beigām ir jānogādā atpakaļ Zebra otrreizējai pārstrādei. Lai
iegūtu informāciju par produktu nogādāšanu Zebra, lūdzu,
skatiet: http://www.zebra.com/weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler
geri dönüştürme için Zebra'ya iade edilmelidir. Ürünlerin nasıl
iade edileceği hakkında bilgi için lütfen şu adresi ziyaret edin:
http://www.zebra.com/weee.
Turkish WEEE Statement of Compliance
EEE Yönetmeliğine Uygundur.
Symbol Technologies LLC End
User License Agreement
BY INSTALLING AND/OR USING THIS PRODUCT, YOU
ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT,
UNDERSTAND IT AND AGREE TO BE BOUND ITS TERMS. IF
YOU DO NOT AGREE TO THE TERMS OF THIS
AGREEMENT, SYMBOL TECHNOLOGIES IS NOT WILLING
TO LICENSE THE PRODUCT TO YOU, AND YOU MUST NOT
USE OR INSTALL THIS PRODUCT.
Grant of License. Symbol Technologies grants you (“Licensee”
or “you”) a personal, nonexclusive, nontransferable,
nonassignable, no cost license to use the software and
documentation (“Product(s)”) subject to the terms and conditions
of this Agreement. You shall use the Products only for your
internal business purposes, exclusively to support Symbol
Technologies devices. Any use of the Products outside of the
conditions set forth herein is strictly prohibited and will be
deemed a breach of this Agreement resulting in immediate
termination of your License. In the event of a breach of this
Agreement, Symbol Technologies will be entitled to all available
remedies at law or in equity (including immediate injunctive relief
and repossession of all Products unless Licensee is a Federal
agency of the United States Government).
You shall not distribute, sublicense, rent, loan, lease, export, re-
export, resell, ship or divert or cause to be exported, re-
exported, resold, shipped or diverted, directly or indirectly, the
Products under this Agreement. You shall not, and shall not
permit others to: (i) modify, translate, decompile, bootleg,
reverse engineer, disassemble, or extract the inner workings of
the Products, (ii) copy the look-and-feel or functionality of the
Products; (iii) remove any proprietary notices, marks, labels, or
logos from the Products; (iv) rent or transfer all or some of the
Products to any other party without Symbol Technologies' prior
written consent; or (v) utilize any computer software or hardware
which is designed to defeat any copy protection device, should
the Products be equipped with such a protection device.
Title to all copies of Products will not pass to Licensee at any
time and remains vested exclusively in Symbol Technologies. All
intellectual property developed, originated, or prepared by
Symbol Technologies in connection with the Products remain
vested exclusively in Symbol Technologies, and this Agreement
does not grant to Licensee any intellectual property rights.
Portions of the Products are protected by United States patent
and copyright laws, international treaty provisions, and other
applicable laws. Therefore, you must treat the Products like any
other copyrighted material (e.g., a book or musical recording)
except that you may make one copy of the Product solely for
back-up purposes. Unauthorized duplication of the Products
constitutes copyright infringement, and in the United States is
punishable in federal court by fine and imprisonment.
Disclaimer. SYMBOL TECHNOLOGIES MAKES, AND YOU
RECEIVE, NO WARRANTIES OF ANY KIND, WHETHER
EXPRESS, IMPLIED, STATUTORY, OR IN ANY
COMMUNICATION WITH YOU. SYMBOL TECHNOLOGIES
SPECIFICALLY DISCLAIMS ANY WARRANTY INCLUDING
THE IMPLIED WARRANTIES OF MERCHANTABILTY,
NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR
PURPOSE. THE PRODUCTS ARE PROVIDED “AS IS.”
SYMBOL TECHNOLOGIES DOES NOT WARRANT THAT THE
PRODUCTS WILL MEET YOUR REQUIREMENTS, OR THAT
THE OPERATION OF THE PRODUCTS WILL BE
UNINTERRUPTED OR ERROR FREE, OR THAT DEFECTS IN
THE PRODUCTS WILL BE CORRECTED. SYMBOL
TECHNOLOGIES MAKES NO WARRANTY WITH RESPECT
TO THE CORRECTNESS, ACCURACY, OR RELIABILITY OF
THE PRODUCTS. Some jurisdictions do not allow the exclusion
of implied warranties, so the above exclusion may not apply to
you.
Limitation of Liability. THE TOTAL LIABILITY OF SYMBOL
TECHNOLOGIES UNDER THIS AGREEMENT FOR
DAMAGES SHALL NOT EXCEED THE FAIR MARKET VALUE
OF THE PRODUCTS LICENSED UNDER THIS AGREEMENT.
IN NO EVENT WILL SYMBOL TECHNOLOGIES BE LIABLE IN
ANY WAY FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT,
SPECIAL OR PUNITIVE DAMAGES OF ANY NATURE,
INCLUDING WITHOUT LIMITATION, LOST BUSINESS
PROFITS, OR LIABILITY OR INJURY TO THIRD PERSONS,
WHETHER FORESEEABLE OR NOT, REGARDLESS OF
WHETHER SYMBOL TECHNOLOGIES HAS BEEN ADVISED
OF THE POSSIBLITY OF SUCH DAMAGES. Some jurisdictions
do not permit limitations of liability for incidental or consequential
damages, so the above exclusions may not apply to you. This
Limitation of Liability provision survives the termination of this
Agreement and applies notwithstanding any contrary provision
in this Agreement. Licensee must bring any action under this
Agreement within one (1) year after the cause of action arises.
Maintenance. Unless provided for in a separate agreement,
Symbol Technologies shall not be responsible for maintenance
or field service of the Products.
High Risk Activities. The Products are not fault-tolerant and are
not designed, manufactured or intended for use or resale as on-
line control software in hazardous environments requiring fail-
safe performance, such as in the operation of nuclear facilities,
aircraft navigation or communication systems, air traffic control,
direct life support machines, or weapons systems, in which the
failure of the Products could lead directly to death, personal
injury, or severe physical or environmental damage (“High Risk
Activities”). Symbol Technologies and its suppliers specifically
disclaim any express or implied warranty of fitness for High Risk
Activities, and if you elect to use the Products in any High Risk
Activities, you agree to indemnify, defend, and hold Symbol
Technologies harmless from and against any and all costs,
damages, and losses related to that use.
U.S. Government. If you are acquiring the Products on behalf of
any unit or agency of the U.S. Government, the following shall
apply. Use, duplication, or disclosure of the Products is subject
to the restrictions set forth in subparagraphs (c) (1) and (2) of the
Commercial Computer Software - Restricted Rights clause at
FAR 52.227-19 (JUNE 1987), if applicable, unless being
provided to the Department of Defense. If being provided to the
Department of Defense, use, duplication, or disclosure of the
Products is subject to the restricted rights set forth in
subparagraph (c) (1) (ii) of the Rights in Technical Data and
Computer Software clause at DFARS 252.227-7013 (OCT
1988), if applicable. Products may or may not include a
Restricted Rights notice, or other notice referring specifically to
the terms and conditions of this Agreement. The terms and
conditions of this Agreement shall each continue to apply, but
only to the extent that such terms and conditions are not
inconsistent with the rights provided to you under the
aforementioned provisions of the FAR and DFARS, as
applicable to the particular procuring agency and procurement
transaction.
Governing Law. This Agreement shall be governed by the laws
of the United States of America to the extent that they apply and
otherwise by the laws of the State of New York without regard to
its conflict of laws provisions.
Compliance with Laws. Licensee will comply with all applicable
laws and regulations, including export laws and regulations of
the United States. Licensee will not, without the prior
authorization of Symbol Technologies and the appropriate
governmental authority of the United States, in any form export
or re-export, sell or resell, ship or reship, or divert, through direct
or indirect means, any item or technical data or direct or indirect
products sold or otherwise furnished to any person within any
territory for which the United States Government or any of its
agencies at the time of the action, requires an export license or
other governmental approval. Violation of this provision will be a
material breach of this Agreement, permitting immediate
termination by Symbol Technologies.
Third Party Software. The Products may contain one or more
items of Third-Party Software. The terms of this Agreement
govern your use of any Third-Party Software UNLESS A
SEPARATE THIRD-PARTY SOFTWARE LICENSE IS
INCLUDED, IN WHICH CASE YOUR USE OF THE THIRD-
PARTY SOFTWARE WILL THEN BE GOVERNED BY THE
SEPARATE THIRD-PARTY LICENSE.
Open Source Software. The Products may contain one or more
items of Open Source Software. Open Source Software is
software covered by a publicly available license governed solely
under Copyright law, whereas the complete terms and
obligations of such license attach to a licensee solely through
the act of copying, using and/or distribution of the licensed
software, such obligations often include one or more of
attribution obligations, distribution obligations, copyleft
obligations, and intellectual property encumbrances. The use of
any Open Source Software is subject to the terms and
conditions of this Agreement as well as the terms and conditions
of the corresponding license of each Open Source Software
package. If there is a conflict between the terms and conditions
of this Agreement and the terms and conditions of the Open
Source Software license, the applicable Open Source Software
license will take precedence. Copies of the licenses for the
included Open Source Software, if any, as well as their
attributions, acknowledgments, and software information details,
are provided in the electronic copy of this Agreement, which is
available in the Legal Notices or README file associated with
the Product. Symbol Technologies is required to reproduce the
software licenses, acknowledgments and copyright notices as
provided by the authors and owners, thus, all such information is
provided in its native language form, without modification or
translation.
Depending on the license terms of the specific Open Source
Software, source code may not be provided. Please reference
and review the entire Open Source Software information to
identify which Open Source Software packages have source
code provided or available. For instructions on how to obtain a
copy of any source code made publicly available by Symbol
Technologies related to Open Source Software distributed by
Symbol Technologies, you may send your request (including the
Symbol Technologies Product name and version, along with the
Open Source Software specifics) in writing to: Symbol
Technologies LLC, Open Source Software Management, One
Zebra Plaza Holtsville, NY USA.
To view additional information regarding licenses,
acknowledgments and required copyright notices for open
source packages used in this Symbol Technologies product,
touch Settings > About device > Legal information > Open
source licenses.
Software Support
Zebra wants to ensure that customers have the latest entitled
software at the time of device purchase in order to keep the
device operating at peak performance levels. To confirm that
your Zebra device has the latest entitled software available at
the time of purchase, visit http://www.zebra.com/support.
Check for the latest software from Support > Products, or search
for the device and select Support > Software Downloads.
If your device does not have the latest entitled software as of
your device purchase date, e-mail Zebra at
entitlementservices@zebra.com and ensure you include the
following essential device information:
•
Model number
•
Serial number
•
Proof of purchase
•
Title of the software download you are requesting.
If it is determined by Zebra that your device is entitled to the
latest version of software, as of the date you purchased your
device, you will receive an e-mail containing a link directing you
to a Zebra Web site to download the appropriate software.
CMM Disclosure
㦻嫷㫋∬㗽 6-7䤓屓⸩冥Ⓟᇭ
2嫷䯉年㦘⹂䓸德⦷年捷ↅ㓏㦘⧖德㧟㠨₼䤓⚺摞⧖⦷
*%7屓⸩䤓棟摞尐㻑ⅴₚᇭ
; 嫷䯉年㦘⹂䓸德咂⺠⦷年捷ↅ䤓㩟⧖德㧟㠨₼䤓⚺
摞怔⒉*%7屓⸩䤓棟摞尐㻑ᇭ←₩♾⦷㷳⮓᧨
㫈㗽⸭棔㍔⑄⺈ₙ嫷₼㓢ಯರ䤓㔏㦾☮⥯扪嫛扪㷴広
㢝ᇭ᧥
This table was created to comply with China RoHS
requirements.
Warranty
For the complete Zebra hardware product warranty statement,
go to: http://www.zebra.com/warranty.
Service Information
Before you use the unit, it must be configured to operate in your
facility’s network and run your applications.
If you have a problem running your unit or using your equipment,
contact your facility’s Technical or Systems Support. If there is a
problem with the equipment, they will contact the Zebra Global
Customer Support at http://www.zebra.com/support.
For the latest version of this guide go to: http://www.zebra.com/
support.
⚗㫋幐
Waste Electrical and Electronic Equip-
ment (WEEE)
䜞Ԭ〦
(Parts)
ᴿᇩ⢟䍞
䫻
(Pb)
⊔
(Hg)
䭿
(Cd)
ޣԭ䬢
(Cr(VI))
ཐ⓪㚊㤥
(PBB)
ཐ⓪ӂ㤥䟐
(PBDE)
䠇ኔ䜞Ԭ
(Metal Parts)
OOOO O O
⭫䐥⁗ඍ
(Circuit Modules)
XOOO O O
⭫㔼⭫㔼㓺Ԭ
(Cables and
Cable
Assemblies)
XOOO O O
ງᯏૂ㚐ਾ⢟䜞
Ԭ
(Plastic and
Polymeric Parts)
OOOO O O
ݿᆜૂݿᆜ㓺Ԭ
(Optics and
Optical
Components)
OOX O O O
⭫⊖
(Batteries)
XOOO O O