Zebra Technologies ZLANGCA Zebra Embedded 802.11b/g Radio User Manual 980603 001 UA GX420d

Zebra Technologies Corporation Zebra Embedded 802.11b/g Radio 980603 001 UA GX420d

User Manual

Download: Zebra Technologies ZLANGCA Zebra Embedded 802.11b/g Radio User Manual 980603 001 UA GX420d
Mirror Download [FCC.gov]Zebra Technologies ZLANGCA Zebra Embedded 802.11b/g Radio User Manual 980603 001 UA GX420d
Document ID927681
Application IDZV9B4hcro2D/LAWiBaeD5g==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize203.82kB (2547704 bits)
Date Submitted2008-04-14 00:00:00
Date Available2008-04-14 00:00:00
Creation Date0000-00-00 00:00:00
Producing SoftwareAcrobat Distiller 7.0.5 (Windows)
Document Lastmod0000-00-00 00:00:00
Document Title980603-001_UA_GX420d.cdr
Document CreatorPScript5.dll Version 5.2.2
Document Author: Zebra Technologies

®
Zebra
GX420d
TM
©2007 ZIH Corp.
980603-001 Rev.A
1
100-240 VAC
50-60Hz
115 VAC
24 VDC
230 VAC
Power Cord statements here
Ensure the appropriate power cord with a three (3) prong plug and an IEC 60320-C13 connector are used at
all times. These power cords must bear the relevant certification mark of the country in which the product is
being used in.
Ensure the appropriate power cord with a three (3) prong plug and an IEC 60320-C13 connector are used at
all times. These power cords must bear the relevant certification mark of the country in which the product is
being used in.
Ensure the appropriate power cord with a three (3) prong plug and an IEC 60320-C13 connector are used at
all times. These power cords must bear the relevant certification mark of the country in which the product is
being used in.
Ensure the appropriate power cord with a three (3) prong plug and an IEC 60320-C13 connector are used at
all times. These power cords must bear the relevant certification mark of the country in which the product is
being used in.
Ensure the appropriate power cord with a three (3) prong plug and an IEC 60320-C13 connector are used at
all times. These power cords must bear the relevant certification mark of the country in which the product is
being used in.
Ensure the appropriate power cord with a three (3) prong plug and an IEC 60320-C13 connector are used at
all times. These power cords must bear the relevant certification mark of the country in which the product is
being used in.
Ensure the appropriate power cord with a three (3) prong plug and an IEC 60320-C13 connector are used at
all times. These power cords must bear the relevant certification mark of the country in which the product is
being used in.
Ensure the appropriate power cord with a three (3) prong plug and an IEC 60320-C13 connector are used at
all times. These power cords must bear the relevant certification mark of the country in which the product is
being used in.
Ensure the appropriate power cord with a three (3) prong plug and an IEC 60320-C13 connector are used at
all times. These power cords must bear the relevant certification mark of the country in which the product is
being used in.
Ensure the appropriate power cord with a three (3) prong plug and an IEC 60320-C13 connector are used at
all times. These power cords must bear the relevant certification mark of the country in which the product is
being used in.
Ensure the appropriate power cord with a three (3) prong plug and an IEC 60320-C13 connector are used at
all times. These power cords must bear the relevant certification mark of the country in which the product is
being used in.
Ensure the appropriate power cord with a three (3) prong plug and an IEC 60320-C13 connector are used at
all times. These power cords must bear the relevant certification mark of the country in which the product is
being used in.
Ensure the appropriate power cord with a three (3) prong plug and an IEC 60320-C13 connector are used at
all times. These power cords must bear the relevant certification mark of the country in which the product is
being used in.
Ensure the appropriate power cord with a three (3) prong plug and an IEC 60320-C13 connector are used at
all times. These power cords must bear the relevant certification mark of the country in which the product is
being used in.
1
USB
10
LAN
11
12
COM/SER
LPT
LAN
LAN
LAN
LAN
5
5
FCC - DECLARATION OF CONFORMITY:
Model: GX420d conforms to the following specification: FCC Part 15, Subpart B, Section 15.107(a) and
Section 15.109(a) Class B digital device
Supplemental Information: This device complies with Part 15 of the FCC Rules. Operation is subject to the
following Two Conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for Class B Digital Devices, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the product manuals, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television reception, the
user is encouraged to do one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC - RADIATION EXPOSURE STATEMENT:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The user is cautioned that any changes or modifications not expressly approved by Zebra Technologies could
void the user's authority to operate the equipment. To ensure compliance, this printer must be used with
shielded communication cables.
Use only power supplies listed in this manual and/or recommended and approved by Zebra Technologies.
INDUSTRY CANADA NOTICE:
This device complies with Industry Canada ICES-003 class B requirements.
Cet equipement est conforme a NMB-003 classe B de la norm Industrielle Canadian.
TUV
Rheinland
Argentina S.A.
EP
UBLIC
AR
GENTINA
Utilice sólo adaptadores con las siguientes características eléctricas y que estén debidamente certificados de
acuerdo a la legislación vigente. El uso de otros adaptadores podría dañar el dispositivo y anular la garantía
además de provocar riesgos al usuario.
Características de entrada: 100-240V; 50-60Hz; 2,8A
Características de salida:
24Vdc; 4,17A (100W max)
Es dürfen nur zugelassene Adapter mit den folgenden elektrischen Kennzeichen benutzt werden. Die
Verwendung anderer Adapter könnte die Vorrichtung beschädigen oder den Benutzer gefährden.
Nennwerte: Eingang:
100-240VAC, 50-60Hz, 2,8A
Ausgang:
24VDC, 4,17A (100W max)
사용자 안내문
B급기기(가정용 정보통신기기)
이 기기는 가정용으로 전자파적합등록을 한 기기로서 주거지역에서는 물론 모든 지역에서 사용할 수 있습
니다.
기기의 명칭/(모델명)
인쇄 기계 GX420t / GX430t
인증받은자의 상호
Zebra Technologies International LLC
제조자/제조국가
Zebra Technologies Corporation/USA
Zebra Technologies International, LLC
333 Corporate Woods Parkway
Vernon Hills, Illinois 60061.3109 U.S.A.
Telephone +1 847.793.2600
Toll-free +1 800.432.0422
Facsimile +1 847.913.8766
Zebra Technologies Europe Limited
Zebra House
The Valley Centre, Gordon Road
High Wycombe
Buckinghamshire HP13 6EQ, UK
Telephone +44 (0)1494 472872
Facsimile +44 (0)1494 450103
Zebra Technologies
Latin American Sales Office
9800 NW 41st Street
Suite 220
Doral, FL 33178 USA
Telephone +1 847.793.2600
Facsimile +1 847.913.8766
Zebra Technologies Asia/Pacific, LLC
120 Robinson Road
#06-01 Parakou Building
Singapore 068913
Telephone +011 / 65 6858 0722
Facsimile +011 / 65 6885 0838
980603- 001

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Creation Date--Text             : 
Mod Date--Text                  : 
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2008:04:11 08:27:40-05:00
Modify Date                     : 2008:04:11 08:27:40-05:00
Metadata Date                   : 2008:04:11 08:27:06-06:00
Creator Tool                    : PScript5.dll Version 5.2.2
Document ID                     : uuid:38A85866C707DD11BF2E95242139112F
Instance ID                     : uuid:9cefff9c-2464-4107-9867-6923a365f7f1
Derived From Instance ID        : uuid:dd399af8-0694-4c32-8d9e-5a66d355d481
Derived From Document ID        : uuid:35ca8ccf-97b6-4728-a70b-e07f3bd79026
Format                          : application/postscript
Creator                         : Zebra Technologies
Title                           : 980603-001_UA_GX420d.cdr
Page Count                      : 10
Author                          : Zebra Technologies
EXIF Metadata provided by EXIF.tools
FCC ID Filing: I28-ZLANGCA

Navigation menu