Zeeva EP-0542 BT ASYM METAL EARBUDS AST User Manual EP 0542 IM LB

Zeeva International Limited BT ASYM METAL EARBUDS AST EP 0542 IM LB

User Manual

FAQFCC ID: 2ADM5-EP-0542Keep All Relevant Information for Future ReferenceEarbuds OverviewMicro USB Charging Cable:USB PlugMicro USB PlugVol-/Previous SongOn/Off ButtonPlay / Pause MusicAnswer / End CallLEDVol+/Next SongMicrophoneFront: Back: Side:MicroUSB Charging PortFCC STATEMENT1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that may cause undesired operation.2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.RF warning statement:The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.-The input voltage to the product is 5V 1A.-In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger/ adapter for charging the product.-Only charge the product at ambient temperatures between 10 deg °C/ 50 deg °F and 40 deg °C/104 deg °F.- Do not heat above 70 deg °C/158 deg °F, eg. Do not expose to sunlight or throw into fire.-Switch off the product after use.-Please note that we won’t take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product.-In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development.Safety instructions for the lithium battery and charging the productMade Exclusively for Five BelowDistributed by Zeeva International LimitedSuite 1006C-8, 10th Floor, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay,Hong Kong, China Attention: If the pairing is not successful within 5 minutes, the earbuds will power off, please repeat the pairing procedures to try again. Pair the wireless earbuds with your mobile device1. Keep the distance between your wireless earbuds and mobile phone (or other devices) within 32.8 Feet.Rhythm Wireless Earbuds x 1Micro USB Cable x 1Instruction Manual x 12. Power on the wireless earbuds.3. Activate the Bluetooth function on your phone within range and select “BT ASYM EARBUD” from the list shown.Reconnect the wireless earbuds to your mobile deviceWhen powered on, the earbuds will automatically connect with the lastsuccessfully paired device.Leave the earbuds 60ft away from your mobile phone or further.Disconnect the wireless earbuds from your mobile devicePower off the earbuds; orSwitch off the Bluetooth on your mobile phone; orPress and hold down the On/Off Button for 3 seconds and the LED will flash.Press and hold down the On/Off Button for 4 seconds and the LED willturn off.Power On/OffPackage ContentsPower OnPower OffAnswer / Reject a callEnd a callWhen you receive a call, press the On/Off Button once to accept the call,or answer the call normally via your mobile phone.Long press On/Off Button to reject a call.Press the On/Off Button once to end the call or hang up your mobile phone.Technical specificationShort press + Button to turn up volume.LED indicator light turns red when charging your earbuds.LED indicator light turns off when your earbuds are fully charged.Long press + Button to advance to next song.Long press - Button to go back to previous song.Short press - Button to turn down volume.FunctionsCharging your EarbudsDriver Diameter: --------------------------------------------------------------------- 10 mmImpedance: --------------------------------------------------------------------------- 32 OhmsSensitivity: ---------------------------------------------------------------------------- 85 dB +/- 3 dBFrequency Response: ------------------------------------------------------------- 20 Hz - 20 KHzRechargeable Li-ion Battery: ----------------------------------------------------- 3.7 VBattery Capacity: -------------------------------------------------------------------- 55 mAhCharging Time: ----------------------------------------------------------------------- 1 - 2 HoursPlaying Time: -------------------------------------------------------------------------- 2 Hours Bluetooth Operating Range:------------------------------------------------------- 32.8 FeetIf the Rhythm Wireless Earbuds cannot be paired with your device, please try the following:Ensure that your earbuds are in pairing mode or reconnectionmode. Ensure that Bluetooth search function of your mobile device is activated.If the Rhythm Wireless Earbuds will not turn on:Make sure the earbuds are fully charged.Can I change the battery for the earbuds?Rhythm Wireless Earbuds use a built-in non-detachable battery whichcannot be removed.If the Rhythm Wireless Earbuds cannot be recharged:If you use a power outlet, ensure that the power supply is connected securelyand the outlet works. If you use a computer, ensure that it is connected and theUSB port is powered.4. The LED blinks in blue when paired successfully.Thank you for purchasing the BT ASYM METAL EARBUDS AST.This manual provides more information about the wireless earbuds, please read the instructions before using. INSTRUCTION MANUALRHYTHMWIRELESS EARBUDS

Navigation menu