Zeeva EP-0542 BT ASYM METAL EARBUDS AST User Manual EP 0542 IM LB
Zeeva International Limited BT ASYM METAL EARBUDS AST EP 0542 IM LB
Zeeva >
User Manual
FAQ
FCC ID: 2ADM5-EP-0542
Keep All Relevant Information for Future Reference
Earbuds Overview
Micro USB Charging Cable:
USB Plug
Micro USB Plug
Vol-/
Previous Song
On/Off Button
Play / Pause Music
Answer / End Call
LED
Vol+/
Next Song
Microphone
Front: Back: Side:
Micro
USB
Charging
Port
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
-The input voltage to the product is 5V 1A.
-In order to charge the product in safe manner and reliable conditions, please
only adopt certified appropriate charger/ adapter for charging the product.
-Only charge the product at ambient temperatures between 10 deg °C/ 50 deg °F
and 40 deg °C/104 deg °F.
- Do not heat above 70 deg °C/158 deg °F, eg. Do not expose to sunlight or
throw into fire.
-Switch off the product after use.
-Please note that we won’t take any responsibility for any wrong operation (eg.
Voltage higher than 5V) as this may result in severe injury or loss of property, and
we cannot control the operating process during the time the user using this
product.
-In extreme cases, abuse or misuse of Lithium battery pack can lead to
explosion, heat generation, fire development or smoke development.
Safety instructions for the lithium battery and charging the product
Made Exclusively for Five Below
Distributed by Zeeva International Limited
Suite 1006C-8, 10th Floor, Exchange Tower,
33 Wang Chiu Road, Kowloon Bay,
Hong Kong, China
Attention: If the pairing is not successful within 5 minutes, the earbuds will
power off, please repeat the pairing procedures to try again.
Pair the wireless earbuds with your mobile device
1. Keep the distance between your wireless earbuds and mobile phone
(or other devices) within 32.8 Feet.
Rhythm Wireless Earbuds x 1
Micro USB Cable x 1
Instruction Manual x 1
2. Power on the wireless earbuds.
3. Activate the Bluetooth function on your phone within range and select
“BT ASYM EARBUD” from the list shown.
Reconnect the wireless earbuds to your mobile device
When powered on, the earbuds will automatically connect with the last
successfully paired device.
Leave the earbuds 60ft away from your mobile phone or further.
Disconnect the wireless earbuds from your mobile device
Power off the earbuds; or
Switch off the Bluetooth on your mobile phone; or
Press and hold down the On/Off Button for 3 seconds and the LED
will flash.
Press and hold down the On/Off Button for 4 seconds and the LED will
turn off.
Power On/Off
Package Contents
Power On
Power Off
Answer / Reject a call
End a call
When you receive a call, press the On/Off Button once to accept the call,
or answer the call normally via your mobile phone.
Long press On/Off Button to reject a call.
Press the On/Off Button once to end the call or hang up your mobile phone.
Technical specification
Short press + Button to turn up volume.
LED indicator light turns red when charging your earbuds.
LED indicator light turns off when your earbuds are fully charged.
Long press + Button to advance to next song.
Long press - Button to go back to previous song.
Short press - Button to turn down volume.
Functions
Charging your Earbuds
Driver Diameter: --------------------------------------------------------------------- 10 mm
Impedance: --------------------------------------------------------------------------- 32 Ohms
Sensitivity: ---------------------------------------------------------------------------- 85 dB +/- 3 dB
Frequency Response: ------------------------------------------------------------- 20 Hz - 20 KHz
Rechargeable Li-ion Battery: ----------------------------------------------------- 3.7 V
Battery Capacity: -------------------------------------------------------------------- 55 mAh
Charging Time: ----------------------------------------------------------------------- 1 - 2 Hours
Playing Time: -------------------------------------------------------------------------- 2 Hours
Bluetooth Operating Range:------------------------------------------------------- 32.8 Feet
If the Rhythm Wireless Earbuds cannot be paired with your device,
please try the following:
Ensure that your earbuds are in pairing mode or reconnection
mode. Ensure that Bluetooth search function of your mobile device is activated.
If the Rhythm Wireless Earbuds will not turn on:
Make sure the earbuds are fully charged.
Can I change the battery for the earbuds?
Rhythm Wireless Earbuds use a built-in non-detachable battery which
cannot be removed.
If the Rhythm Wireless Earbuds cannot be recharged:
If you use a power outlet, ensure that the power supply is connected securely
and the outlet works. If you use a computer, ensure that it is connected and the
USB port is powered.
4. The LED blinks in blue when paired successfully.
Thank you for purchasing the BT ASYM METAL EARBUDS AST.
This manual provides more information about the wireless earbuds,
please read the instructions before using.
INSTRUCTION MANUAL
RHYTHM
WIRELESS EARBUDS