Zeeva SP-0012 Bluetooth Blast LED Cube Speaker User Manual IM Blast BT Speaker

Download:
Mirror Download [FCC.gov]
Document ID	3391583
Application ID	F6ATDyJQJKG03zS1c1hxvw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	73.29kB (916186 bits)
Date Submitted	2017-05-15 00:00:00
Date Available	2017-05-15 00:00:00
Creation Date	2017-10-24 20:48:47
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-24 20:48:47
Document Title	IM_Blast BT Speaker
Document Creator	Adobe Illustrator CC 2015 (Windows)

Product Overview
Charging your Bluetooth speaker
Front
1. Use the Micro USB cable provided with this Bluetooth speaker.
2. Connect the Micro USB plug to Micro USB charging port on the speaker, then
connect the USB plug to a USB port on a computer or wall adapter to begin charging.
3. The light will turn red while charging and will turn off once fully charged.
Back
NOTE:
• You must select a qualified charger from a regular manufacturer.
• You must charge the Bluetooth speaker if it has been not used for
more than 12 months.
DC5V
USER MANUAL
Thank you for purchasing the Blast Bluetooth Speaker.
This manual provides more information
about this wireless speaker, please read the instructions before using.
LED
Indicator
OFF/ON
Micro USB
Charging Port
On/Off
Switch
Package Contents
Blast Bluetooth Speaker x 1pc
Micro USB Charging Cable x 1pc
User Manual x 1
Power on
Slide the ON/OFF Switch to the right.
Technical specification
Driver Diameter: ----------------------------------------------------------- 40mm
Impedance: ----------------------------------------------------------------- 4 Ohms
Frequency Response: --------------------------------------------------- 20Hz - 20KHz
Battery Capacity: ---------------------------------------------------------- 300 mAh
Battery Type: --------------------------------------------------------------- Li-ion Battery 3.7V
Playing time: ---------------------------------------------------------------- 1-2 hours
Bluetooth Range: ---------------------------------------------------------- 32.8 Feet
Bluetooth Version: --------------------------------------------------------- 3.0
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Power off
Slide the ON/OFF Switch to the left.
Pair Bluetooth speaker with your mobile device
1. Keep the distance between your Bluetooth speaker and mobile phone
(or other devices) within 32.8 Feet.
2. Power on the Bluetooth speaker.
3. Activate the Bluetooth function on your phone within range and select
“Blast BT Spk” from the list shown.
4. You will hear a beep sound when pairing is successful.
Reconnect Bluetooth speaker to your mobile device
When powered on, the Bluetooth speaker will automatically connect with the last
successfully paired device.
FAQ
If the Bluetooth speaker cannot be paired with your device,
please try the following:
Ensure that your speaker is in pairing mode or reconnection mode.
Ensure that Bluetooth search function of your mobile device is activated.
If the Bluetooth speaker cannot be recharged:
If you use a power outlet, ensure that the power supply is connected securely
and the outlet works. If you use a computer, ensure that it is connected and the
USB port is powered.
FCC ID: 2ADM5-SP-0012

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:3dd93ab8-9b39-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:07 14:00:54Z
Create Date                     : 2017:07:07 14:00:54Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:3dd93ab8-9b39-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled

EXIF Metadata provided by EXIF.tools