Zentan Technology DZRCS1 Bluetooth And ANT+ Wireless Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3828658
Application ID	wUShpwXqsoLScpe99rjGgw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	35.29kB (441159 bits)
Date Submitted	2018-04-25 00:00:00
Date Available	2018-04-26 00:00:00
Creation Date	2018-04-03 14:12:50
Producing Software	Microsoft® Word 2013
Document Lastmod	2018-04-03 14:12:50
Document Title	User Manual
Document Creator	Microsoft® Word 2013
Document Author:	謝昕翰

ZR7 Bluetooth And ANT+ Wireless Module
Hardware Integration Guide
Version 1.0
April 2, 2018
Specification
Category
Feature
Implementation
RF
Bluetooth
4.2 Single Mode
ANT+
Broadcast
Frequency
2.402-2.480 GHz
nRF Toolbox
Over the air
Via JTAG interface
Via JTAG interface
FW Upgrade
Supply Voltage
1.7 – 3.6V
Physical
18.25mm X 11mm
Operating Temperature
0 to 50°C
Storage Temperature
-10 to 60°C
Pin Definitions
Pin number
Pin Name
TYPE
Description
GND
POWER
GND PIN
P0.25
Digital I/O
General purpose I/O PIN
P0.26
Digital I/O
General purpose I/O PIN
P0.27
Digital I/O
General purpose I/O PIN
P0.28
AIN4
Digital I/O
Analog input
General purpose I/O PIN
SAADC/COMP/LPCOMP input
P0.29
AIN5
Digital I/O
Analog input
General purpose I/O PIN
SAADC/COMP/LPCOMP input
P0.30
AIN6
Digital I/O
Analog input
General purpose I/O PIN
SAADC/COMP/LPCOMP input
P0.31
AIN7
Digital I/O
Analog input
General purpose I/O PIN
SAADC/COMP/LPCOMP input
GND
POWER
GND PIN
10
DEC4
NC
11
DCC
NC
12
X1
NC
13
X2
NC
P0.2
Digital I/O
General purpose I/O PIN
AIN0
Analog input
SAADC/COMP/LPCOMP input
15
P0.3
AIN1
Digital I/O
Analog input
General purpose I/O PIN
SAADC/COMP/LPCOMP input
16
P0.4
AIN2
Digital I/O
Analog input
General purpose I/O PIN
SAADC/COMP/LPCOMP input
17
P0.5
AIN3
Digital I/O
Analog input
General purpose I/O PIN
SAADC/COMP/LPCOMP input
18
P0.6
Digital I/O
General purpose I/O PIN
19
P0.7
Digital I/O
General purpose I/O PIN
20
P0.8
Digital I/O
General purpose I/O PIN
21
P0.9
NFC1
Digital I/O
NFC INPUT
General purpose I/O PIN
NFC antenna connection
22
P0.10
NFC2
Digital I/O
NFC INPUT
General purpose I/O PIN
NFC antenna connection
23
VDD
POWER
POWER supply pin
24
P0.11
Digital I/O
General purpose I/O PIN
25
P0.12
Digital I/O
General purpose I/O PIN
14
26
P0.13
Digital I/O
General purpose I/O PIN
27
P0.14
Digital I/O
General purpose I/O PIN
28
P0.15
Digital I/O
General purpose I/O PIN
29
P0.16
Digital I/O
General purpose I/O PIN
30
P0.17
Digital I/O
General purpose I/O PIN
31
P0.18
Digital I/O
General purpose I/O PIN
32
P0.19
Digital I/O
General purpose I/O PIN
33
P0.20
Digital I/O
General purpose I/O PIN
34
P021
RESET
Digital I/O
General purpose I/O PIN
configurable as pin reset
35
36
SWDCLK
SWDIO
Digital input
serial wire Debug clock input for
debug and programming
Digital I/O
serial wire Debug I/O for debug
and programming
37
P0.22
Digital I/O
General purpose I/O PIN
38
P0.23
Digital I/O
General purpose I/O PIN
39
P0.24
Digital I/O
General purpose I/O PIN
40
GND
POWER
GND PIN
This device is intended only for OEM integrators under the following
conditions:
In accordance with FCC Part 15C and RSP-100, this module is listed as a Modular
Transmitter device.
Changes or modifications not expressly approved by the manufacturer could void the user’s
authority to operate the equipment.
The antenna of this transmitter must not be co-located or operating in conjunction with any
other antenna or transmitters within a host device, except in accordance with FCC multitransmitter product approval procedures.
FCC Label Instructions
The final end product must be labeled in a visible area with the following “Contains
Transmitter Module FCC ID: QSWDZRCS1”
Any similar wording that expresses the same meaning may be used.
Additionally, there must be the following sentence on the device, unless it is too small to carry
it:
“This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.”
USER MANUAL
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 5
Language                        : zh-TW
Tagged PDF                      : Yes
Author                          : 謝昕翰
Creator                         : Microsoft® Word 2013
Create Date                     : 2018:04:03 14:12:50+08:00
Modify Date                     : 2018:04:03 14:12:50+08:00
Producer                        : Microsoft® Word 2013

EXIF Metadata provided by EXIF.tools