Zephyrlock DP700 SMART CARD READER/WRITER FOR RFID SYSTEM User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4170300
Application ID	0+ldV4Qf9nfljvyxnnRb7Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	39.03kB (487921 bits)
Date Submitted	2019-02-15 00:00:00
Date Available	2019-02-15 00:00:00
Creation Date	2019-02-13 10:29:51
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2019-02-13 10:29:51
Document Title	User Manual
Document Creator	Microsoft® Office Word 2007
Document Author:	Michael Chen

DP700S USER MANUAL
1. Summary
1.1 What are DP700S?
The DP700S card reader is an essential front-end processing device for developing IC
Card related products and system integration. Applications such as access control, identity
authentication, inquiries, stored value and other smart card management systems. It utilizes
13.56MHz communication frequency and conforms to the ISO14443 Type-A protocol. It supports
non-contact smart cards conforming to ISO14443 Type-A, such as: Mifare S50, Mifare S70,
MF1ICL10, Mifare Pro, Mifare Desfire, Mifare Ultralight, Hua Hong 1102, ETC.
Power Indicator
Communication
Status Indicator
RFID Cards Reading
Area
USB Port
1.2 RFID Card Types and Functions
Item
Card Types
Functions
User Card
Data Card
Time Change Card
Setup Card
Management Card
Control Card
This card can open registered locks only
Read the open lock records and lock information
Setup lock clock
Write preset information into lock
Open any lock does not clear the registered card/password
Authorization Card
➊ Open any lock ➋ Clear registered card/password
Authorize ELMS software and locks
1.3 Operation System Composition
Operation System consisted of PC based Electronic Lock Management System (ELMS) software and RFID
Card.
System Requirements:
* OS: Windows XP/Windows7/Windows8/ Windows10, UNIX and LINUX.
* Electronic Locks Management System (ELMS)
* USB A-B cable
2. Operating Steps
1. Connect the DP700S to the USB port of the computer via a USB cable. Plug-and-play USB2.0 (HID
Protocol), no need to install any drivers.
2. Run the ELMS software as shown in the photo below
3. Place cards on the DP700S and follow the prompts to perform the appropriate card operation.
FCC Information and Copyright
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC ID:XLY-DP700.
The device has been evaluated to meet general RF exposure requirement. The device can be used
In portable exposure condition without restriction.
15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 3
Language                        : zh-CN
Tagged PDF                      : Yes
Author                          : Michael Chen
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2019:02:13 10:29:51+08:00
Modify Date                     : 2019:02:13 10:29:51+08:00
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools