Zero Price Book 2017
User Manual: Zero Zero Price Book Price Book
Open the PDF directly: View PDF 
.
Page Count: 18
| Download | |
| Open PDF In Browser | View PDF |
Price book 3 Effective August 12, 2017 • Rev 8/17 This price list supersedes and cancels all previous price lists. Prices shown are subject to change without notice. Administrative Offices Allegion Administrative Office 11819 N. Pennsylvania St. Carmel, IN 46032 allegion.com/us Placing orders You can place orders with Allegion via the fax numbers or emails listed below: Zero International Fax#: 1-800-851-0000 Email: Zero.Orders@allegion.com Mechanical Locks & Key Systems Fax#: 1-800-452-0665 Email: Order_Entry_Schlage_Commercial@allegion.com FastTrack Fax#: 1-800-288-4242 Email: Order_Fasttrack@allegion.com Customer Care Our Customer Care Representatives are available for questions or assistance. You can reach the Zero International customer care team at 800-635-5335. You can contact Allegion customer care at 877-671-7011 (Press 1 for Sales Support | Press 2 for Product Support | Press 3 for SSC) or through the email addresses listed below: Sales Support Carolinas (North Carolina, South Carolina, Virginia) Carolinas_Sales_Support@allegion.com Central (Arkansas, Illinois, Iowa, Kansas, Missouri, Nebraska, Oklahoma) Central_Sales_Support@allegion.com Chicago (Illinois-Northern, Wisconsin) Chicago_Sales_Support@allegion.com Florida Florida_Sales_Support@allegion.com Great Lakes (New York, Pennsylvania) Great_Lakes_Sales_Support@allegion.com Metro New York Metro_New_York_Sales_Support@allegion.com Michigan Michigan_Sales_Support@allegion.com Northern California Northern_California_Sales_Support@allegion.com Mid Atlantic (Delaware, Maryland, New Jersey) Mid_Atlantic_Sales_Support@allegion.com Northwest (Alaska, Oregon, Washington) Northwest_Sales_Support@allegion.com Midwest (Indiana, Kentucky, Ohio, West Virginia) Midwest_Sales_Support@allegion.com South (Alabama, Georgia, Louisiana, Mississippi, Tennessee) South_Sales_Support@allegion.com Mountain States (Colorado, Idaho, Montana, Nevada, Utah, Wyoming) Mountain_States_Sales_Support@allegion.com New England (Connecticut, Main, Massachusetts, New Hampshire, Rhode Island, Vermont) New_England_Sales_Support@allegion.com Southern California (California-Southern, Hawaii) Southern_California_Sales_Support@allegion.com Southwest (Arizona, New Mexico) Southwest_Sales_Support@allegion.com North Central (Minnesota, North Dakota, South Dakota) North_Central_Sales_Support@allegion.com Texas Texas_Sales_Support@allegion.com Michigan Michigan.Quotes@allegion.com Northern California NoCal.Quotes@allegion.com Mid Atlantic (Delaware, Maryland, New Jersey) MidAtlantic.Quotes@allegion.com Northwest (Alaska, Oregon, Washington) Northwest.Quotes@allegion.com Midwest (Indiana, Kentucky, Ohio, West Virginia) Midwest.Quotes@allegion.com South (Alabama, Georgia, Louisiana, Mississippi, Tennessee) South.Quotes@allegion.com Technical Product Support Mechanical Locks/Keying Systems Mechanical_Locks_TechProdSupport@allegion.com Request for Quote Carolinas (North Carolina, South Carolina, Virginia) Carolinas.Quotes@allegion.com Central (Arkansas, Illinois, Iowa, Kansas, Missouri, Nebraska, Oklahoma) Central.Quotes@allegion.com Chicago (Illinois-Northern, Wisconsin) Chicago.Quotes@allegion.com Florida Florida.Quotes@allegion.com Great Lakes (New York, Pennsylvania) GreatLakes.Quotes@allegion.com Metro New York Metro.Quotes@allegion.com Mountain States (Colorado, Idaho, Montana, Nevada, Utah, Wyoming) Mtn.States.Quotes@allegion.com New England (Connecticut, Main, Massachusetts, New Hampshire, Rhode Island, Vermont) NewEngland.Quotes@allegion.com North Central (Minnesota, North Dakota, South Dakota) NorthCentral.Quotes@allegion.com Price Book 3 2 Effective August 12, 2017 • Rev. 08/17 Southern California (California-Southern, Hawaii) SoCal.Quotes@allegion.com Southwest (Arizona, New Mexico) Southwest.Quotes@allegion.com Texas Texas.Quotes@allegion.com “When Nothing Else Is Good Enough For Long Enough" Supersedes all previous lists. Subject to change without notice. For latest additions, corrections, revisions, visit www.zerointernational.com Since 1923 MINIMUM CHARGE: $50.00 Net. Surcharge may apply. Material charged to next stock size. CLAIMS: All claims for shortage or improper filling of order should be made within 10 days of receipt. RETURNS: No returns accepted without prior authorization. Returns should be made within 30 days of authorization, freight prepaid, 45% restocking and handling charge will apply. Returns made after 30 days from date of delivery will receive a credit to their account to be applied to future orders. Nonstandard and specialty fabricated items are not returnable. CANCELLATION CHARGE: 20% If order is fabricated and packed. TERMS: Payable in U.S. Currency. Without open credit – Bank check, American Express, Master Card , Visa and Discover. Material charged to next stock size. All prices are F.O.B. factory. GUARANTEE: Three years against defects in material or workmanship. Defective material will be replaced, however, no back charges for damage incurred or work done thereon will be allowed. WARRANTY: The following is made in lieu of all warranties, express or implied, including warranties or merchantibility and fitness for a particular purpose: Purchase or use of this product constitutes an agreement with Seller and Manufacturer that, if this product proves to be defective or in any way unsuitable, Seller’s and Manufacturer’s limit of liability for all damages, including but not limited to incidental or consequential damages, and User’s or Purchaser’s exclusive remedy, regardless of legal theory, including theories of breach of warranty, negligence and strict liability, shall be to receive, at Seller’s or Manufacturer’s option, repair of the defective product, an equivalent quantity of replacement product or a refund of the purchase price. Main Office And Manufacturing ZERO INTERNATIONAL 2720 To b ey Dr i ve, I n di a n a po li s , I N 462 1 9 P ho ne : 87 7-67 1 -70 1 1 Fax: 8 00-8 5 1- 0 0 0 0 E -ma il : Ze ro.Cu s to m er.Su ppo r t @a lleg i o n .co m www.zerointernational.com Price Book 3 Effective August 12, 2017 • Rev. 08/17 3 TERMS & CONDITIONS Allegion General Terms and Conditions of Sale and Service 1. GENERAL/ACCEPTANCE. (a) This Agreement contains the only terms and conditions by which Company will quote and sell Deliverables to Customer; (b) The terms “purchase order” or “order” for the purposes of this Agreement include the term “request for quotation,” as appropriate; (c) This Agreement supersedes all pre-printed or boilerplate terms and conditions set forth in any purchase order issued by Customer; (d) No reference herein to Customer’s purchase order will in any way incorporate different or additional terms and conditions, all of which Company hereby expressly objects to; (e) ANY ACCEPTANCE BY COMPANY OF CUSTOMER’S PURCHASE ORDER IS EXPRESSLY CONDITIONED ON THE CUSTOMER’S ASSENT TO AND ACCEPTANCE OF THE TERMS AND CONDITIONS CONTAINED IN THIS AGREEMENT; (f) Company reserves the right to decline any order, in whole or in part, for any reason. 2. ORDERS. a. Order Processing. When Customer wishes to place an order for Deliverables, it will deliver to Company a purchase order. All such purchase orders must (i) be in a written format acceptable to Company, (ii) be legible, (iii) include a purchase order number, (iv) include Customer’s account number, invoice address, ship to address, shipping method, shipper’s letter of instruction for international shipments, part number, pricing, and designated contact information, (v) include, if applicable, any special configuration ID numbers, necessary programming information, special factory instructions, and requested specifications regarding a particular finish, handing, design, backset, or strike, (vi) reference any applicable pricing discounts under an ongoing buying program or based on a written quote from Company, along with the applicable buying program number or quotation number, and (vii) not combine buying program and quoted product on the same order. b. Minimum Orders. In the event the order value does not meet any required minimum net Deliverable value, Company may, at its sole discretion, (i) increase the quantity of items in the order to meet the minimum net Deliverable value requirement; (ii) apply a minimum order charge; (iii) reject the order, or (iv) waive the requirement, provided that the waiver of a requirement for one order shall not constitute a waiver of the requirement for any future orders. c. Acceptance of Purchase Orders. Company will endeavor to (i) acknowledge receipt of each purchase order issued in accordance with this Agreement, and (ii) notify Customer whether Company accepts or rejects the purchase order. If Company fails to accept or reject a purchase order within a reasonable time period, such failure to respond will be deemed a rejection of the entire order. Orders that combine buying program and quoted product on the same order will be routed back to your local SSC office in order to review subject purchase order. d. Changes to Order/ Cancellation of Orders. Additional terms and conditions regarding order changes and cancellations are available on the Allegion customer website, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. Unless otherwise provided herein, Customer acknowledges that (i) requesting a Change Order may cause a delay in the scheduled shipment date, a longer lead time or result in a new scheduled shipment date; (ii) Orders may not be changed after 48 hours of Company’s order acknowledgment; (iii) After 48 hours of Company’s order acknowledgment, all changes to an accepted purchase order will be subject to a Change Order charge of 25% of the net Deliverable value, plus the cost of labor and fabrication or raw material that Company incurred prior to the receipt of the Change Order from Customer, or that may be required due to the Change Order; (iv) the requested change may result in additional charges for labor, fabrication, and raw material, and (v) if Customer cancels an order or portion of an order that includes Deliverables that have been manufactured and prepped for shipping, a 45% restocking fee will apply. Notwithstanding the foregoing, Customer cannot change or cancel credential orders, reader orders, biometrics orders or any non-cataloged, special, Custom or nonstandard items once they have been placed. All cancelled orders for a Non Recurring Expense (NRE), credential orders, reader orders, biometrics orders, and/or Custom orders will be subject to a cancellation charge of 100% of the acknowledged price. e. Add-ons. Add-on orders will not be accepted. Additions to orders will be entered as separate stand-alone orders and must qualify for all terms of sale, including discounts, on an individual basis. f. Fast-Track Orders. No changes or cancellations will be accepted on the 24-Hour Fast Track Program. For 3-day Fast Track orders, changes and cancellations may only be requested by Customer within 24 hours of Company’s order acknowledgment if the order has not shipped. For 5-Day Fast Track orders, changes and cancellations may only be requested by Customer if the order has not shipped and if the request is made to Company within 48 hours of Company’s order acknowledgment. Return Material Authorization (RMA) for Deliverables must be processed through Fast Track Customer Service. g. Steelcraft Orders. For all Steelcraft orders, changes or cancellations are allowed without penalty only if made within 48 hours of Company’s order acknowledgment, and provided that the order has not shipped. Some exceptions do apply – please consult the factory. Changes are not allowed on Rapid Program orders after the order has been entered and acknowledged. After 48 hours of Company’s order acknowledgment, all changes or cancellations are subject to a charge of 25% of the order. Unless otherwise specified by Company in writing, any changes to orders acknowledged by Company that affect the delivery date will be deemed a new order and will require acknowledgement by Company as provided in this Section. Additional products, features, terms and conditions regarding the Rapid Program are available on the Allegion customer website, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. 3. PRICES, INVOICES AND PAYMENT. a. Prices. The prices in Company’s Price Book are subject to change at any time, without notice to Customer. Company may charge Customer additional amounts if Customer requests special packing, marking, shipment, product modification, or engineering services. Oral prices specified by Company are null and void. Quote numbers must be referenced on Customer’s purchase order in order for the Company’s quoted pricing to apply. Orders that do not reference a quote number will receive buy program pricing or book net pricing. Quoted prices are for those specific products quoted for a specified job, and are subject to the Price Book in effect at the time Company receives the order. b. Taxes. Prices do not include any present or future federal, state or local property, license, privilege, sales, use, excise, gross receipts or other like taxes or assessments which may result from transactions or any services performed in connection therewith. Any taxes, charges, or duties imposed by any governmental authority on the sale of Deliverables will be paid by Customer, in addition to the selling price specified by Company. c. Payment Terms. Company will deliver to Customer an invoice with each shipment of Deliverables hereunder. Customer will pay all invoiced amounts within 35 days of the invoice date (subject to any early pay discounts that may be offered to Customer by Company in its sole discretion). Customer will make all payments in United States dollars. Past due invoices will be subject to a late payment service charge of 1.5% per month on any overdue unpaid balance, equivalent to 18% per annum, or the maximum rate permitted by law, Price Book 3 4 whichever is less. Customer shall reimburse Company for all costs of collection, including, without limitation, reasonable attorneys' fees, for any overdue amount owed by Customer to Company, and such collection costs shall also be subject to interest charges. 4. QUOTATIONS. a. Project Quotations. Project or new construction quotes are restricted to the specific project quoted for the quantities, finishes, and series of Deliverables referenced on the quote. Company reserves the right to require proof of sale of Company products for any quoted project. b. Stock Quotations. Deliverables fulfilling stock quotations may only be used for the following: i) Stocking of the Customer’s shelves for small, quick-turn, discretionary projects, or ii) Sale to a general contractor or installer for new construction. Stock quotations may not be used for any project containing any Company no-substitution, specified products. Deliverables purchased under Stock Quotations cannot be redistributed to other Customer branch locations or re-sold to other resellers or used for aftermarket sales, end-user annual contracts or sold over the counter to any walk in trade. c. General. All quotes are subject to this Agreement, unless otherwise specified by Company, and are subject to change at any time prior to Company’s acceptance of a purchase order referencing the applicable quote number. Company, its representatives and employees reserve the right, in their sole discretion and for any reason, to refuse a Customer’s request to quote a price other than the standard list price, regardless of whether Company or its representatives or employees have previously quoted discounted prices to the Customer on some or all of its orders. Customer’s failure to comply with this Section 4 will be considered a material breach of this Agreement, and will entitle Company to immediately terminate any purchase orders and/or Customer’s ability to distribute Company’s products. 5. SECURITY INTEREST. Customer grants Company, and Company retains, a purchase money security interest and lien on any and all of Customer’s rights, title and interest in each Deliverable sold by Company to Customer, wherever located, until the invoice for the applicable Deliverable(s) is paid in full, including any late charges and costs of collection. Customer authorizes Company to, and will assist Company in, taking all necessary steps to perfect and maintain Company’s interest in such Deliverables. 6. CREDIT TERMS. . Unless Customer pre-pays all of its purchase orders in advance, its purchase orders will be subject to the credit limit and other terms of credit (“Credit Terms”) set forth in Company’s credit application, which Credit Terms Customer acknowledges are subject to change by Company at any time. Company reserves the right to request payment in advance of shipment or any order or to request adequate assurances for Customer’s payment of an order and may withhold or stop shipment, without any liability to Company, until Customer submits payment or adequate assurance of payment. 7. RESALE OF DELIVERABLES. Customer agrees and warrants that it will offer Company products in support of Company-written specifications and will maintain sufficient inventory to adequately support End Users, installers, and/or general contractors’ needs. Company may implement an MSRP or a resale pricing programs at any time in its sole discretion. Failure to comply with such program(s) will be considered a material breach of this Agreement, and will entitle Company to immediately terminate any purchase order and/or Customer’s ability to distribute Company’s products. Customer shall, at its own expense, gain and maintain sufficient knowledge of the industry and products competitive with Deliverables so as to be able to (a) explain in detail to End Users, installers, and/or general contractors the differences between the Deliverables and competing products, (b) ensure that an adequate number of trained, capable and qualified technical personnel with sufficient knowledge of the Deliverables and who have obtained all necessary licenses and permits are available to assist End Users, installers, and/or general contractors, and (c) respond to such End Users, installers, and/or general contractors with respect to the general operation and use of the Deliverables including, but not limited to, (1) acting as a liaison between the End Users, installers and/or general contractors and Company in matters requiring Company participation, (2) providing general product information and configuration support on standard protocols and features, (3) collecting relevant technical problem identification information, and (4) posting and distributing any warranty information concerning the Products in accordance with Company’s instructions. Customer is responsible for all service and support resulting from the re-sale of any Deliverable to End-Users, installers and/or general contractors, examples of which may include, but are not limited to, support activities such as installation, initialization, software set-up, training, trouble-shooting, technical support and field service. In the event Customer is unwilling or unable to perform said support activities, Company reserves the right to recover from Customer any and all expenses incurred by Company to resolve the aforementioned End-User, installer and/or general contractor issues. Technical product training is recommended for Customer in order to fully service and support Deliverables purchased from Company that are resold to End-Users, installers and/or general contractors. 8. DEFAULT. If Customer is in default of payment or otherwise with respect to any purchase order or other contract with Company, Company shall have the right, in addition to all other legal remedies and without prejudice to any of its right hereunder, to defer further shipments under that or any other purchase order until such default is corrected and to declare all outstanding bills of Customer to be immediately due and payable. 9. INSPECTION AND DELIVERY. a. Inspection. Customer will inspect all Deliverables immediately after receiving them. Customer will be deemed to have accepted the Deliverables unless Customer notifies Company in writing of any nonconformance within 10 days of delivery and provides Company written evidence reasonably documenting that nonconformance. Inspection of Deliverables at Company’s facility is not permitted. b. Delivery. Delivery schedules for Deliverables are based upon current production capacities, material or component availability, and inventory, and may be changed by Company as conditions require. Delivery schedules for services are based upon Company’s prompt receipt of, and prompt access to, Customer’s equipment and all information necessary to complete the services. In no event will any delivery date be construed as falling within the meaning of “time is of the essence.” Partial delivery shall be accepted by Customer and paid for at the price and on the terms stated herein. Any partial delivery shall constitute a separate sale, and payment shall be separately made when due. If any part of a delivery hereunder is not delivered by Company in accordance with Customer’s purchase order, this Agreement shall not be affected thereby. 10. TITLE & RISK OF LOSS. Unless otherwise specified by Company, (i) where the Customer is located in the United States, all Deliverables will be sold “Uniform Commercial Code, FOB Origin, Company’s factory”; and (ii) where the Customer is located outside of the United Effective August 12, 2017 • Rev. 08/17 TERMS & CONDITIONS States, all Products will be sold “Ex-works, Company’s factory (Incoterms 2010).” In either instance, title and risk of loss will pass to Customer upon delivery to the carrier at Company’s factory, provided, however, as set forth herein, Company shall retain a security interest in the Deliverables until full payment has been made therefore, and Customer agrees, upon request, to do all things and acts necessary to protect Company’s interest by adequately insuring the Deliverables against loss or damage from any cause and to have Company named as an additional insured. Customer will promptly provide Company with a copy of the relevant certificate of insurance upon Company’s request. 11. SHIPPING. a. Freight Charges. Company will ship all Deliverables in accordance with Company’s freight shipment guidelines, which are set forth on the My Allegion Portal (“Freight Shipping Guidelines”), WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN. b. Rush Charges. Expedited order options are available as set forth in Company’s Freight Shipping Guidelines. c. Packing and Marking. Company will pack, mark, and ship Deliverables according to its standard procedures for shipment, unless the parties agree, in writing, that Company will comply with any special instructions provided by Customer. Special instructions may result in an increased price. d. International Shipments. For all international orders, a Shipper’s letter of instruction must be submitted in writing with the order. Failure to do so will result in the order being rejected. Complete adherence to this order requirement will be strictly enforced. Company will not be held liable for any charges resulting from delays due to lack of complete required information being supplied. e. Once received by the Company, a purchase order cannot be combined with any other order to increase average order size as it relates to Company’s Freight Shipping Guidelines. However, for orders placed under Company’s FastTrack 24 Hour/5 Day Program (available for Schlage, Von Duprin, LCN and Glynn-Johnson products); ii) FastTrack 24 Hour/3 Day Program (available for Ives products); or ProExpress (available for specific product lines stated in the ProExpress price book for Falcon, Ives, Glynn Johnson, LCN, Schlage and Von Duprin products), the applicable brands or product categories may, subject to certain order requirements identified by Company, be combined on a single order to increase average order size used in Company’s Freight Shipping Guidelines. 12. CLAIMS. All claims must be submitted in writing to Company as follows: (i) All claims for prices must be submitted within thirty (30) days from the date of invoice; (ii) All claims regarding Deliverable quantity or incorrect orders must be submitted within ten (10) days from the date of delivery; (iii) All claims for damage to Deliverables (while in the care, custody, and control of Company) must be submitted within thirty (30) days from the date of invoice; (iv) All claims for loss or damage to Deliverables while in the care, custody, and/ or control of a carrier will be the responsibility of Customer, unless otherwise agreed by the parties. 13. PRODUCT CHANGES. Company’s product policy is one of ongoing update and revision, and accordingly, Company reserves the right to change, without notice, the design of, or the process of manufacturing, the Deliverables covered by this Agreement. 14. PRODUCT USAGE LIMITATION. Customer agrees: (i) not to sell or use a Deliverable in any manner contrary to the manner in which the Deliverable is intended to be used; and/ or (ii) not to modify the design of any Deliverable for use with another product without the prior written consent of Company. 15. PRODUCT RETURNS. Unless otherwise agreed by the parties in writing, Deliverables that are correctly furnished by Company per the purchase order may not be returned unless Customer receives written authorization from Company. If returns are authorized by Company, a return merchandise authorization (“RMA”) number must be provided by Company. Deliverables identified under such RMA must be returned to Company within 90 days of issuance of the RMA. Such RMA number and any accompanying RMA documents, the original invoice number, and a written explanation for the return must be included with the returned Deliverables in order for Company to inspect and approve a credit for the return. For warranty returns, a credit in the amount of the original purchase price will only be issued if, after Company’s receipt and inspection of the returned Deliverables, Company confirms, in its sole discretion, the defect is valid and approves the return. For non-warranty returns/convenience returns, in the event Company approves such a return, in its sole discretion, the following shall apply: (a) the total amount of Deliverables requested to be returned shall be a minimum of $250.00; (b) a credit will be made to Customer’s account in the amount of the original purchase price less freight and a handling charge of 45% of the net material on the original invoice; and (c) only Deliverables that are new, current, standard, non-obsolete, non-specially manufactured, unused, in their original condition as at the time of sale by Company to Customer, in their original packaging and in Customer’s inventory less than 180 days from the date of shipment by the Company, and not ordered as part of a master key solution may be considered by Company for return. Such credit will only be issued if, after Company’s receipt and inspection of Deliverables, Company approves the return. The amount of final credit will be determined upon receipt at the factory and following Company’s inspection and analysis of the condition of the returned material. Company retains the right to deny credit to anyone for any reason. 16. CONFIDENTIAL INFORMATION. a. Non-Use And Non-Disclosure. Customer shall not use the Confidential Information of the Company except for the purpose of performing its obligations under this Agreement or exercising the rights granted herein (the “Purpose”). Customer shall protect Confidential Information of the Company from disclosure and unauthorized use in the same manner that it protects its own Confidential Information, but in no event shall such standard of care be less than reasonable care. Customer may disclose Confidential Information of the Company only to its employees who require such information for the Purpose and who are subject to confidentiality obligations at least as protective as those set forth herein. b. Proprietary Information and Advice. (a) All designs, data, and specifications provided by Company are proprietary and may not be disclosed or reused by Customer without the prior written consent of Company; (b) Company assumes no obligation or liability for any advice given by Company, the results obtained, or damages incurred as a result of such advice, and all such advice is given and accepted at Customer’s risk. c. Return. Upon the termination or expiration of a purchase order or this Agreement or upon the request of the Company, the Customer agrees to end all further use of, to immediately return to the Company the original version of, and to delete or destroy all copies of, any and all Confidential Information of the Company. 17. TRADEMARKS. Except as agreed to by Company in writing, Customer agrees not to (a) use Company’s name in any form of publicity; or (b) use, create, register or market, directly or indirectly, in whole or in part, Company’s names, logos, brands, or any other trademarks, or names that are now or may hereafter be owned by Company, as part of Customer’s corporate or business name, as part of an internet domain name, uniform resource locator (URL), or in any way connected with Customer’s business, trade address or other designations. Upon termination of this Agreement or upon the request of company for any reason, any use of Company’s trademarks or names will be immediately discontinued. 18. LIMITED WARRANTY. COMPANY MAKES NO OTHER WARRANTIES EXCEPT THOSE STATED IN COMPANY’S LIMITED WARRANTY IN EFFECT ON THE DATE COMPANY ACCEPTS EACH APPLICABLE PURCHASE ORDER (“LIMITED WARRANTY”). THE LIMITED WARRANTY MAY BE FOUND IN THE APPLICABLE PRICE BOOK AND ON THE ALLEGION CUSTOMER WEBSITE, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. COMPANY WILL MAIL CUSTOMER A HARD COPY OF THIS WARRANTY UPON CUSTOMER’S WRITTEN REQUEST. IN THE EVENT THAT CERTAIN DELIVERABLE WARRANTIES ARE NOT FURNISHED BY THE COMPANY TO CUSTOMER, COMPANY WARRANTS ONLY TO CUSTOMER THAT THE DELIVERABLES WILL BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF 12 MONTHS FROM THE DATE OF SHIPMENT OF THE DELIVERABLES. COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY IS LIMITED TO REPAIRING OR REPLACING, AT COMPANY’S OPTION, THE DEFECTIVE DELIVERABLE, PROVIDED WRITTEN NOTICE OF THE DEFECT OR NONCONFORMANCE IS PROVIDED BY CUSTOMER WITHIN 30 DAYS OF DISCOVERY OF THE DEFECT OR NONCONFORMANCE. COMPANY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE DELIVERABLES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. a. Exclusions. The provisions of this Limited Warranty do not apply to Deliverables that: (A) are not the proper size for the application; (B) are not installed in accordance with Company’s published installation instructions; (C) are installed with improper or incorrect parts and/or are used for purposes for which they are not designed or intended; (D) have been repaired or altered without the Company’s prior written consent; (E) have been subjected to misuse, abuse, negligence or accident; (F) have been improperly stored, installed, maintained or operated; (G) have been used in violation of written instructions provided by Company to Customer; (H) have been subjected to improper temperature, humidity, or other environmental conditions, or (I) have been affected by normal wear and tear. In addition, the provisions of this Limited Warranty do not apply to any defects or issues with the design or performance of equipment or products not manufactured by Company, nor does it apply to any code compliance or permit requirements for the assembly, installation, erection or construction of any goods. Company is not responsible for loss or damage resulting from use of Deliverables in conjunction with parts or systems not manufactured by Company. Accessories or products furnished by the Company, but manufactured by others, shall carry whatever warranty the manufacturers have conveyed to the Company and which can be passed to Customer. b. Services. Company warrants that its services will be free from defects in material and workmanship for a period of 12 months from the date of completion of the particular items of service. Company’s sole obligation under this service warranty is limited to repair or reperformance, at its option of the service, provided however, if repair or reperformance is either impractical or impossible, the Company will refund to Customer that portion of the price paid to Company for any defective service, provided written notice of the defect or nonconformance is provided by Customer within 30 days of discovery of the nonconformance. c. Notification. Customer agrees to immediately notify Company in writing if any claim is made against Customer for any damages caused by any modules, parts, products, service or other Deliverables which may be the direct result of any defect in the manufacture of such aforementioned products. Customer agrees to cooperate with Company and its counsel in the defense of such claim and Customer agrees not to settle such claim without Company’s written consent. If Customer fails to notify Company of such claim or fails to cooperate in such defense as aforesaid, then Company shall be discharged from any obligations under this Section and shall have no further liability to Customer. d. Exceptions. The following costs and expenses are not covered by the provisions of these limited warranties: (i) labor costs for the removal and reinstallation of Deliverables or other manufacturer’s products; (ii) shipping and freight expenses required to return Deliverables to Company; (iii) normal maintenance; and (iv) economic losses. In addition, the provisions of this warranty are not applicable to anything other than defects in Company’s material (products only) or workmanship. 19. LIMITATION OF REMEDIES. CUSTOMER’S EXCLUSIVE AND SOLE REMEDY ON ACCOUNT OF, OR IN RESPECT OF, THE FURNISHING OF NON-CONFORMING DELIVERABLES, SHALL BE TO (A) SECURE REPAIR OR REPLACEMENT OF THE PRODUCTS; OR (B) SECURE REPAIR OR RE-PERFORMANCE OF THE SERVICES OR TO OBTAIN A REFUND OF THE PRICE PAID FOR THE DEFECTIVE SERVICE, ALL AT COMPANY’S OPTION. IN NO EVENT WILL THE COMPANY’S MAXIMUM LIABILITY EXCEED THE SELLING PRICE FOR THE DELIVERABLE. THE WARRANTY, OBLIGATIONS AND LIABILITIES OF COMPANY (INCLUDING ITS SUPPLIERS) AND THE RIGHTS AND REMEDIES OF CUSTOMER ARE EXCLUSIVE AND ARE IN LIEU OF AND CUSTOMER HEREBY WAIVES AND RELEASES ALL OTHER WARRANTIES, OBLIGATIONS, REPRESENTATIONS OR LIABILITIES EXPRESS OR IMPLIED ARISING BY LAW, IN CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY) OR OTHERWISE, INCLUDING BUT NOT LIMITED TO (I) ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTY IMPLIED THROUGH COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE OR (II) CLAIMS ARISING OUT OF THE NEGLIGENCE OF COMPANY OR COMPANY’S SUPPLIERS OR (III) ANY OTHER CLAIM ARISING OUT OF, CONNECTED WITH, OR RESULTING FROM THE PERFORMANCE OF COMPANY OR FROM THE DESIGN, MANUFACTURE, SALE, REPAIR, LEASE OR USE OF THE DELIVERABLE, OR ANY COMPONENT THEREOF, DELIVERED OR RENDERED HEREUNDER OR OTHERWISE. 20. INDEMNIFICATION AND LIMITATION OF LIABILITY. a. Customer shall indemnify, defend and hold Company, and its officers, directors, employees, customers, Affiliates, suppliers, users and agents, (collectively the “Indemnitees”) harmless from and against any and all damages, claims, losses, expenses, costs, obligations, liabilities, including without limiting the generality of the foregoing, liabilities for court costs and attorneys’ fees, suffered directly or indirectly by an Indemnitee by reason of, or arising out of any injury, death or loss to any person, or injury to any property (collectively, “Damages”), received Price Book 3 Effective August 12, 2017 • Rev. 08/17 5 TERMS & CONDITIONS or sustained by any person(s) or property, arising out of, occasioned by, attributable or related to i) any breach of any representation or warranty made by Customer, its officers, directors, employees, affiliates, users, agents, representatives or customers to Company or any third party, (ii) any failure by Customer to perform or fulfill any of its covenants, acts and/or omissions to Company or to any third party, or (iii) any litigation, proceeding or claim by any third party relating in any way to the obligations of Customer and/or the Deliverables sold by Company to Customer hereunder. Customer shall not consummate any settlement of any indemnified claim without the Indemnitees’ prior written consent. Customer’s obligation to indemnify Indemnitees will continue in full force and effect notwithstanding the termination or expiration of any order under this Agreement. In any claim against an Indemnitee by an employee of Customer or any subcontractor or anyone directly or indirectly employed by any of them or anyone for whose acts they may be liable, the indemnification obligations set forth in this Section shall not be limited in any way by or for Customer or any subcontractor under any applicable worker’s compensation act, disability or other employee benefit act, or insurance coverage. This provision shall survive termination of any order or Agreement. IN NO EVENT WILL COMPANY, ITS OFFICERS, DIRECTORS, EMPLOYEES, CUSTOMERS, AFFILIATES, USERS AND AGENTS, (NOR COMPANY’S SUPPLIERS) BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND OR NATURE UNDER ANY CIRCUMSTANCES INCLUDING, BUT NOT LIMITED TO, LOSS OF USE OF THE PRODUCTS, SERVICE INTERRUPTION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF INTEREST, LOST GOODWILL, LOSS OF DATA, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, LOSS BY REASON OF SHUTDOWN OR NON-OPERATION, INCREASED EXPENSES OF OPERATION, OR CLAIMS OF CUSTOMER’S CUSTOMERS, OR ANY OTHER LOSSES OR DAMAGES ARISING OUT OF ANY LACK OR LOSS OF USE OF THE DELIVERABLES WHETHER BASED ON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. b) INTELLECTUAL PROPERTY INDEMNITY. Company makes no representation or warranty to the Customer that the Deliverables shall not infringe any intellectual property rights including, without limitations, claims arising from patent, copyright, trademark, trade secret, or other intellectual property infringement. Customer agrees to hold Company harmless from and defend the Company against any such claim of intellectual property infringement, including any Damages resulting from that claim, the cost of complying with any preliminary or permanent injunction, and all other costs of defense (including the attorneys’ fees and costs), in connection with the foregoing. c) To the extent that applicable law does not permit any limitations set out in this Agreement, such limitation shall not be applied or invoked. Nothing in this Agreement will be interpreted to disclaim liability of Company or the Indemnitees for gross negligence or willful misconduct. The limitations of remedy and liability herein shall not be interpreted to affect Company’s obligations, if any, for claims for (i) property damage, (ii) personal injury, or (iii) wrongful death asserted by persons who are not parties to or beneficiaries of this Agreement. Further, the limitations of remedy and liability herein shall not be interpreted to limit Company’s or Customer’s right, if permitted by applicable law, to assert a claim for contribution among joint tortfeasors in connection with a claim by a person who is not a party to this Agreement. 21. CERTIFICATIONS. Certification of Deliverables for compliance with UL and ANSI standards are tested and performed by third-party independent laboratories. Any field modification or alteration of certified Deliverables will void certification and Company is not liable to Customer to certify any modified or altered Deliverable. 22. TERM FOR CLAIMS. NO ACTION ARISING OUT OF ANY CLAIMED BREACH OF THIS AGREEMENT BY COMPANY MAY BE BROUGHT BY CUSTOMER MORE THAN ONE (1) YEAR AFTER THE CAUSE OF ACTION HAS ARISEN. 23. CONSUMER PRODUCTS WITH RESPECT TO “CONSUMER PRODUCTS” AS DEFINED UNDER THE MAGNUSONMOSS WARRANTY ACT (“MMWA”), THE FOLLOWING STATEMENTS ARE MADE. (A) SOME STATES OR LOCAL LAWS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU; (B) IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITED TO THE DURATION OF THE WARRANTY PROVIDED IN SECTION 18 ABOVE. (C) SOME STATES OR LOCAL LAWS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU; AND (D) THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR LOCATION TO LOCATION. 24. FORCE MAJEURE/EXCUSABLE DELAY. Any delay or failure of Company to perform its obligations hereunder will be excused to the extent that it is caused by an event or occurrence beyond Company’s control such as, by way of example and not by way of limitation, acts of God, acts by any governmental authority (whether valid or invalid), governmental laws and regulations not presently in effect, fires, floods, windstorms, explosions, riots, natural disasters, wars, sabotage, accidents, labor problems (including, without limitation, lockouts, strikes, and slowdowns) at Company’s facility, its source plant or their suppliers, inability to obtain power, material, labor equipment, or transportation, or court injunction or order. The delivery date will be extended for a time equal to that of the delay and the schedule for Company’s performance will be deemed adjusted to that effect. 25. ENTIRE AGREEMENT AND AMENDMENT. This Agreement, together with the attachments, exhibits, webpages, or supplements specifically referenced and incorporated herein, constitute the entire agreement between Company and Customer with respect to the matters contained herein and supersede all previous communications, representations, or agreements, either oral or written between Company and Customer. No agreement or understanding varying or expanding this Agreement will be binding upon either party unless it is in writing and signed by a duly authorized representative of each party hereto. 26. CONFLICTS. In the event of any conflict or inconsistency between the terms of any agreement, or any part of an agreement or the various documents (including, but not limited to, electronic documents) between Company and Customer, unless the parties agree otherwise in writing, the various components of the agreements shall be given the following precedence (in descending order of precedence): a) any master agreement or long term agreement between Company and Customer; b) any specific terms, conditions and/ or warranties of the individual products or Deliverables; c) the terms and conditions of this Agreement, and d) any purchase order. 27. UNSATISFACTORY CREDIT/TERMINATION FOR INSOLVENCY OR DEFAULT. Price Book 3 6 Customer shall furnish Company with statements evidencing Customer’s financial condition as Company may, from time to time, reasonably request, and shall notify Company immediately of any and all events that may have a material adverse effect on Customer’s business or financial condition. If Company determines, in its sole discretion, that Customer’s financial condition or creditworthiness is inadequate or unsatisfactory, then in addition to Company’s other rights, Company may without liability or penalty, take any of the following actions: (i) modify the payment terms for any outstanding and/or future purchases; (ii) cancel any previously accepted orders; (iii) delay any further shipment of Deliverables to Customer; or (iv) any combination of the above. Company may immediately terminate an order from Customer by giving written notice to Customer in the event of the happening of any of the following or any other comparable event: (i) insolvency of the Customer; (ii) filing of a petition in bankruptcy by or against the Customer; (iii) appointment of a receiver or trustee for the Customer; (iv) execution of an assignment for the benefit of creditors by the Customer, all of which will allow Company to demand reclamation of all affected orders; (v) Customer ceases or threatens to cease to trade; (vi) Company determines that Customer does not meet or no longer meets the credit requirements of Company or Customer’s credit account is closed; (vii) any Customer violation of law, specifically including, without limitation, those laws set forth in this Agreement. In the event of termination in accordance with this section, Company will not be obligated to accept any existing or additional orders from Customer and Company will be released from its obligation to deliver under orders accepted prior to such termination. The rejection or termination of any order by Company will not entitle Customer to any termination or severance compensation, or to any payment in respect to any goodwill established by Customer, or render Company liable for damages on account of the loss of prospective profits, or on account of any loss, expenditure, investment or obligation incurred or made by Customer. No action taken under this Section 27 by Company (nor any failure of Company to act under this Section 27) will constitute a waiver by Company of any of its rights to enforce Customer’s obligations, including the obligation of Customer to make payments as required under this Agreement. Upon termination of any order, all amounts owed by Customer to Company will become immediately due and payable, whether or not otherwise then due or payable. 28. CREDIT RISK ON RESALE OF DELIVERABLES. Customer is responsible for all credit risks with respect to, and for collecting payment for, all Deliverables sold to third parties (including End Users, installers, and/or general contractors) whether or not Customer has made full payment to Company for such Deliverables. The inability of Customer to collect payment for any Deliverable shall not affect Customer’s obligation to pay Company for any Deliverable. 29. GOVERNING LAW; VENUE; AND EXPENSES. Any dispute or claim relating to this Agreement shall be governed by and construed according to the laws of the State of Indiana (excluding its conflict of laws principles); and not by the provisions of the 1980 United Nations Convention on the International Sale of Goods. Any disputes or claims shall be instituted and maintained in the courts of the State of Indiana. Customer consents to the exercise of jurisdiction over it by such courts and agrees that Indiana is not an inconvenient forum for any action arising from or relating to this Agreement. Customer agrees to pay for all expenses (including, but not limited to, collection costs, court costs and attorneys’ fees) incurred by Company in enforcing the obligations of Customer under this Agreement. 30. RELATIONSHIP OF THE PARTIES. Nothing in this Agreement or any other document creates an employment, partnership, joint venture, or agency relationship between Company and Customer, including that of franchisee/franchisor. No party will have any power or authority to enter into any commitment on behalf of or otherwise bind the any other party on any matter. No employee of Customer will be deemed to be an employee of Company. If any provision of this Agreement is deemed to create a franchise relationship or business opportunity between the Parties, then Company may terminate any purchase order or this Agreement or the Parties shall negotiate in good faith to modify this Agreement so as to effect the original intent of the Parties as closely as possible in a mutually acceptable manner in order that the transactions contemplated hereby are consummated as a reseller agreement and not a franchise or business opportunity agreement. 31. SETOFF. Customer does not have the right to setoff or to back charge against any amounts which become payable to Company under this Agreement or otherwise. Company will not accept responsibility for backcharges for the cost of material or labor by Customer or any third party. 32. ELECTRONIC COMMUNICATIONS AND ELECTRONIC SIGNATURES. Both parties expressly agree to electronic transactions and acknowledge that documents they sign electronically will bind them to the same extent as a paper signature. Customer represents and warrants to Company that only employees authorized to bind Customer legally shall electronically sign any document under this Agreement. Customer shall comply with any method of electronic communication/payment processing specified by Company, including electronic funds transfer, pay-on-receipt processes/systems, order transmission, releases, electronic signature, and electronic communication systems, including, without limitation, the use of electronic data interchange (“EDI”) portals. Notwithstanding the foregoing, e-mails, even those containing a signature block of one of Company’s representatives, shall not constitute a signed writing. 33. COMPLIANCE WITH APPLICABLE LAWS. a. General. Company and Customer will comply with all applicable federal, state and municipal laws, regulations, codes, ordinances and orders that pertain to the Deliverables, including but not limited to full compliance with any applicable provisions of The Health Insurance Portability and Accountability Act. Where the Customer is located outside the United States, or where the customer intends to ship the product outside the United States, the Customer shall be responsible for compliance with all U.S. export laws, and for filing all U.S. Electronic Export Information, as applicable. b. The Customer acknowledges and agrees that: (i) it shall not violate applicable laws and regulations in performing its duties under this Agreement; (ii) it does not and shall not engage in any conduct that shall violate any applicable anti-bribery or anti-corruption laws or regulations; (iii) it (and its owners, officers, directors, employees and agents) shall not pay, offer, promise or authorize the payment of, either directly or indirectly, anything of value (including but not limited to cash, gifts and entertainment) to (a) any government official or employee of any government; (b) any official or employee of any department, agency, or instrumentality of a government; (c) any employee of any corporation or entity owned or controlled by a government; (d) any family member of such officials or employees; (e) any Effective August 12, 2017 • Rev. 08/17 TERMS & CONDITIONS political party, party official, or political candidate; or (f) any other persons, owners, officers, directors, employees and agents of any corporation or entity; to improperly or illegally assist in obtaining or retaining business (including but not limited to any contracts, avoidance of duties or reduction of tariffs, reduction of taxes or to obtain money owed, or to obtain regulatory approval) or for the purpose of causing, soliciting or inducing the sale and purchase of the Deliverables by any party, and (iv) it has full knowledge of and will comply with the Company’s Code of Conduct for Business Partners as set forth on the Allegion customer website, WHICH IS HEREBY INCORPORATED BY REFERENCE. c. The Customer shall indemnify and hold the Company harmless from any claim, demand, expense or cost arising from any breach of this Article. d. The Customer shall permit the Company to conduct an audit or review of the Customer’s financial books and records and business operations at such other times that the Company considers it necessary to confirm compliance with this provision. Such audit may be conducted by representatives of the Company or, at the Company’s sole discretion, by a certified public accounting firm selected by the Company. The Customer shall cooperate with any inquiries from the Company’s Ethics & Compliance Group. e. A violation of this provision constitutes a material breach of this Agreement and the Company may terminate any purchase order or this Agreement immediately, with no opportunity to cure, in accordance with Section 27 of this Agreement. f. Notwithstanding the foregoing provisions of this Section 33, (i) Company is not responsible for obtaining or maintaining any permits for the performance of services or the verification or compliance with any code requirements relative to the performance of services, (ii) to the extent any sale of Deliverables pursuant to this Agreement may require approval of the U.S. Government, Company’s obligations under this Agreement are conditioned upon the grant of such approval and upon compliance by Customer with any restrictions imposed by the U.S. Government in connection with such approval, and (iii) in the event the Deliverables are to be used in a nuclear facility, the Customer shall, prior to such use, arrange for insurance or governmental indemnity protecting Company against liability. The Customer hereby releases and agrees to indemnify Company and its suppliers for any nuclear damage including, but not limited to, loss of use, in any manner arising out of the nuclear incident, whether alleged to be due, in whole or in part by Company or its suppliers. g. No Inducements. Each party represents to each other that neither it nor any person acting on its behalf has, in contravention of any applicable law, given or offered to give or will give or offer to give, any sum of money or other material consideration to any person, directly or indirectly, as an inducement to obtain business hereunder or to influence the granting of licenses or other governmental permissions to enter into this Agreement or perform obligations hereunder. h. Equal Employment Opportunity. Company is a U.S. federal contractor that complies with Executive Order 11246, as amended, and applicable regulations in 41 CFR Parts 60-1 through 60-60, 29 U.S.C. § 793 and applicable regulations in 41 CFR § 60-741; and 38 U.S.C. § 4212 and applicable regulations in 41 CFR Part 60-250 and 60-300. THE FOLLOWING PROVISIONS ARE INCORPORATED HEREIN BY REFERENCE: Executive Order 11246, as amended by Executive Order 13672, and 41 CFR § 60-4.3(a); Executive Order 11701 and 41 CFR §§ 60-250.5(a), 60-300.5; Executive Order 11758 and 41 CFR § 60-741.5(a); U.S. immigration laws, including the L-1 Visa Reform Act of 2004 and the H-1B Visa Reform Act of 2004; and Executive Order 13496. i. Ethical Business Conduct. Customer shall adopt and comply with Company’s Business Partner Code of Conduct which is EXPRESSLY INCORPORATED HEREIN BY REFERENCE. 34. REPRESENTATIONS AND WARRANTIES. Customer represents, warrants and covenants to Company that: (a) it has the right, power, and authority to enter into this Agreement and fully perform its obligations hereunder; (b) it has all necessary rights in and to its respective Content and Marks for use within the scope of this Agreement, including the licenses granted herein; and (c) it complies, and at all times shall comply, with all laws, rules, and regulations in effect that are applicable to its performance under this Agreement, including obtaining all such approvals and/or permits as may be required hereunder. 35. NO THIRD-PARTY BENEFICIARY. Each party is entering into this Agreement solely based on the representations contained herein for its own purposes and not for the benefit of any third party. 36. NOTICES AND CHANGE OF ADDRESS. All notices or other communications under this Agreement shall be in writing and delivered in person, or sent by receipted courier, express mail, e-mail, or postage prepaid certified or registered mail, addressed to the party for whom it is intended, at the addresses set forth in this Agreement. Either party may change its address for notice by giving written notice to the other party. Any notice or other communication shall be deemed given no later than the date actually received. Notice by courier, express mail, certified mail, or registered mail shall be deemed given on the date it is officially recorded as delivered and, in the absence of such record of delivery, it shall be rebuttably presumed to have been delivered on the third Business Day after it was deposited. Notices sent by e-mail require tangible confirmation of receipt from addressee. 37. ASSIGNMENT. Customer may not assign this Agreement without the prior written consent of Company. Company may assign its rights and delegate its duties under this Agreement, without the prior consent of Customer, to an Affiliate, or to a third party in the event of a spin-off, merger, business combination, consolidation or sale of all, or substantially all, of its assets or business that are related to this Agreement. The rights and duties in this Agreement shall bind and inure to the benefit of any such assignee. 38. SEVERABILITY. If any provision of this Agreement is held to be invalid, illegal, or unenforceable under any statute, regulation, ordinance, executive order, or other rule of law, that provision will be deemed severed to the extent necessary to comply with such statute, regulation, ordinance, order, or rule. In the event such provision is deemed severed, the parties will negotiate in good faith to arrive at an alternative arrangement approximating the original business objective of the parties. The remaining terms and conditions of this Agreement will remain in effect. 39. NO IMPLIED WAIVER. The failure of either party at any time to require performance by the other party of any provision of this Agreement will in no way affect the right to require such performance at any time thereafter, nor will the waiver of either party of a breach of any provision of this Agreement constitute a waiver of any succeeding breach of the same or any other provision. 40. MISCELLANEOUS. (a) This Agreement does not make either party the agent or legal representative of the other party. Neither party is authorized to create any obligation on behalf of the other party including, but not limited to, the obligation for payment of any service or warranty obligation hereunder; (b) The rights and remedies herein reserved to Company are cumulative and additional to any other rights and remedies provided at law or equity; (c) The official text of this Agreement is in the English language. If this Agreement is translated into another language, the English text will govern any question with respect to interpretation; (d) The headings in this Agreement are for convenience of reference only and do not affect the meaning of this Agreement in any manner. DEFINITIONS. Capitalized terms have the meanings set forth in this Section, or in the Section in which they first appear in this Agreement. “Agreement” means these Allegion Terms and Conditions of Sale and Service, together with any applicable Country Supplement or Region Supplement provided by Company, and all of the documents referenced herein or therein. “Affiliate” means any Person that directly or indirectly, through one or more intermediaries, controls, is controlled by, or is under common control with, the Company. The term “control” (including the terms “controlled by” and “under common control with”) means the possession, directly or indirectly, of the power to direct or cause the direction of the management and policies of a Person, whether through the ownership of voting securities, by contract or otherwise. “Business Day” means any day except Saturday, Sunday or any other day on which commercial banks located in the United States are authorized or required by Law to be closed for business. “Company” means Schlage Lock Company, LLC or any subsidiary or affiliate thereof selling products that are part of the Allegion product portfolio. Schlage Lock Company and/or its subsidiary or affiliates will be severally but not jointly liable under the Agreement. “Company Marks” refers to the Marks of Company. “Confidential Information” shall mean any and all information provided by either party to the other party pertaining to the disclosing party’s business. Confidential Information shall include, but not be limited to, any bitting lists, formulae for products, manufacturing processes, production techniques, packaging processes, methods, research materials, ideas, marketing plans and related materials, quality standards, test results and data, apparatus, engineering drawings, contract documents, computer software, hardware, or firmware, business activities information such as financial information, reports, projections, books and records, customer and supplier information, and operations, customer and supplier lists and data, specifications, know how, and other Proprietary Information or Trade Secrets (as defined herein) that either party may furnish to the other party. Confidential Information shall not include information that: (a) is or becomes publicly known if such public knowledge or disclosure is not the result of any act or failure to act on the part of the receiving party; (b) is, at the time of disclosure, already known to the Receiving Party without utilizing the Confidential Information; (c) is information disclosed to the Receiving Party by a third party which is not to the Receiving Party’s knowledge, after inquiry of the third party, under a duty of confidentiality to the Disclosing Party; or (d) is independently developed by the Receiving Party without the use of Confidential Information. The Receiving Party shall have the burden of proof as to prior knowledge and absence of breach. Confidential Information may be furnished in any tangible or intangible form including, but not limited to, writings, drawings, computer and other electronic media, logic diagrams, component specifications, graphs, prototypes, samples, or verbal communications and regardless of whether such information is marked or designated as “confidential.” For the avoidance of doubt, all information, knowledge or data disclosed by Company to Customer, regardless of whether disclosed in written, tangible, oral, visual or other form, including, without limitation, sample products, equipment, software, or other objects or material, provided by Company to Customer, and all information, knowledge or data which was obtained by Customer from visits to Company’s facilities, shall be considered “Confidential Information” under this Agreement. “Content” means all information (including without limitation any text, music, sound, photographs, video, graphics, data or software), in any medium, on a particular Company Web page or Website or in Marketing Materials. “Customer” means the purchaser of Deliverables from Company. “Deliverables” means any good or service or both purchased by Customer from Company under these General Terms and Conditions of Sale and Service. “End Users” means the purchaser that (a) has acquired a Deliverable from Customer for (i) its own and its Affiliate’s/Affiliates’ internal use and not for resale, remarketing or distribution or (ii) incorporation into its own products and (b) is an individual or entity, other than any federal, state or local agency, office or division. “IP” means all intellectual property and industrial property rights comprising or relating to/ of the following: (a) Patents; (b) Trademarks; (c) internet domain names, whether or not Trademarks, registered by any authorized private registrar or Governmental Authority, web addresses, web pages, website and URLs; (d) works of authorship, expressions, designs and design registrations, whether or not copyrightable, including copyrights and copyrightable works, software and firmware, application programming interfaces, architecture, files, records, schematics, data, data files, and databases and other specifications and documentation; (e) Trade Secrets; and (f) all other intellectual property and industrial property rights, and all rights, interests and protections that are associated with, equivalent or similar to, or required for the exercise of, any of the foregoing, however arising, in each case whether registered or unregistered and including all registrations and applications for, and renewals or extensions of, such rights or forms of protection pursuant to the Laws of any jurisdiction throughout in any part of the world. “Marketing Materials” means all marketing brochures, buckslips, pamphlets, emails, text, call scripts or other material, whether in printed format, audio or audiovisual format, or in any other format, that contain any (i) Content relating to the Company Deliverables or (ii) Company Marks. “Marks” means collectively the domain names, trademarks, trade names, service marks, trade dress, logos, and the like used or provided by either party for use in connection with this Agreement. “Patents” means all patents (including all reissues, divisionals, provisionals, continuations and continuations-in-part, re-examinations, renewals, substitutions and extensions thereof), patent applications, and other patent rights and any other Governmental Authority-issued indicia of invention ownership (including inventor’s certificates, petty patents and patent utility models). “Person” means a person or entity. “Price Books” mean Company’s current Price Book in effect for the applicable Deliverable being purchased by Customer. “Trade Secrets” means and includes business or technical information of either party, including processes, formulas, devices, techniques, compilations and other material that a party attempts to maintain in secret and that derive commercial value for such party from not being generally known to the public or readily ascertainable through independent development or reverse engineering. Price Book 3 Effective August 12, 2017 • Rev. 08/17 7 CUSTOM CHARGE: Special door markings and bulk packaging markings available at no charge. FABRICATION: • All items cut with tolerance -0+1/8"(3.2) to 1/2"(12.7) • Drilling according to industry practice. • All threshold straight cut. • NH - No Holes Standard List - All models where NH is standard can have holes drilled as Engineered special, customer must submit template with order. Model 15 48 49 63 64 65 68 69 70 73 76 80 84R 102 103 104 105 106 107 164 168 175 232 233 234 235 236 237 238 259R 265 267 268 269 304 469 522 523 524 525 526 544 545 546 547 548 560 561 563 564 565 566 568 600CP NH - Optional or Standard Standard Standard Standard Optional Optional Optional Standard Standard Optional Optional Optional Optional Optional Standard Standard Standard Standard Standard Standard Optional Standard Optional Standard Standard Standard Standard Standard Standard Standard Standard Optional Optional Standard Standard Optional Standard Optional Optional Optional Optional Optional Optional Optional Standard Standard Standard Optional Optional Optional Optional Optional Optional Optional Standard Model 601CP 622 623 624 625 626 627 628 643 647 653 654 655 656 657 663 664 672 673 674 675 676 678 1545 1673 1674 1675 1682 1684 1685R 1686R 2361 2673 2676 3672 3673 3674 3675 3676 6570 6575 6710 7000 7332 7334 7335 7336 7337 8452 8655 8724 8726 8729 NH - Optional or Standard Standard Optional Optional Optional Optional Optional Optional Optional Optional Standard Optional Optional Optional Standard Standard Standard Optional Standard Standard Standard Standard Standard Standard Optional Optional Optional Optional Optional Optional Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional MITER $ 4.74 list each RIPPING $ 5.90 list per foot SPOT WELD $ 8.54 list per foot BEVELING $ 5.90 list per foot FLOOR CLOSER COVER: Prices are addition to threshold list prices. TYPE 1 For Doors Hung in Center of Frame $ 129.15 list adder single door $ 263.99 list adder double door Left Hand Shown TYPE 3 For Use with All Offset Closers and Pivot Sets $ 367.46 list adder single door $ 734.92 list adder double door Left Hand Shown TYPE 4 For Doors Hung Flush with Face of Frame $ 367.46 list adder single door $ 734.92 list adder double door Left Hand Shown TYPE 5 For Use with Offset Closers and Pivot Sets Left Hand Shown $ 459.33 list adder single door $ 918.67 list adder double door BRONZE FINISHING: • B-ORB (Oil Rubbed Bronze Finish) Add 40% to list price • B-POL (High Buff Polished Bronze Add 40% to list price models 7000, 7332, 7334, 7335, 7336, 7338 only) • B-SAT ( Satin Polished Bronze Add 40% to list price models 7000, 7332, 7334, 7335, 7336, 7338 only) OPTIONS: • E Epoxy Tread $ 10.03 list adder per foot • EL Luminescent and Epoxy Tread $ 10.03 List Adder per foot • V3 Full Body Fill for Thresholds $ 14.36 List Adder per foot • EV3 Epoxy Tread and V3 Full Body Fill $ 24.40 List Adder per foot • ELV3 Luminescent and Epoxy Tread $ 24.40 List Adder per foot with V3 Full Body Fill • FLO Air Flow Configuration $ 3.60 List Adder per foot (Sweeps, Shoes, and Door Bottoms) • LS Light Spring for Door Bottoms • PSA Pressure Sensitive Adhesive (Weather Stripping and Intumescent) • SEC Security Screws • Z49 Door Bottom End cap System • ZAG Anti Ligature (Weather Stripping and Head and Jamb) $ 1.31 List Adder per foot FASTENERS: Supplied at no charge except drive screws & nails. Flathead wood screws supplied with threshold, expansion shields extra. FINISH DESIGNATIONS / ABBREVIATIONS: • PIVOT HOLES $ 21.00 list each • COPING (Detail required): - L cut $ 21.00 net each - U cut $ 42.00 net each • RETURN ENDS $ 94.63 added to total list price threshold A AA B D G Price Book 3 8 • • • • • = Aluminum, Mill finish = 204R1/202R1 Clear Anodized Finish = Architectural Bronze, Mill finish = 2 Step Dark Bronze Anodized (Dark Brown) = 204R1/202R1 Gold Anodized finish Effective August 12, 2017 • Rev. 08/17 B-ORB = B-POL = B-SAT = SP = STST = Oil Rubbed Bronze finish High Buff Polished Bronze Stain Polished Bronze Steel Prime Stainless Steel CATALOG ITEMS NUMERICAL INDEX PART NUMBER LIST PRICE LIST PRICE PER FOOT PER METER TYPE 4B 4Z 5B 5Z 11A 11D 11G 15A 15B 18B 19B 19WB 23B 25AA 25D 25G 31AA 31D 31G 32AA 32D 32G 32P-BK 32P-GY 33AA 33D 33G 34AA 34D 34G 34P-BK-PSA 34P-GY-PSA 35AA 35D 35G 36AA 36D 36G 38AA 38D 38G 39A 39D $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ 9.80 3.15 10.69 3.45 4.33 6.00 6.00 6.17 35.29 1.71 1.96 2.01 6.69 2.48 4.71 4.71 7.60 10.79 10.79 7.60 10.79 10.79 1.87 1.87 7.60 10.79 10.79 10.50 14.73 14.73 4.30 4.30 10.50 14.73 14.73 10.34 14.73 14.73 10.34 14.73 14.73 7.67 10.34 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ 32.16 10.33 35.07 11.30 14.23 19.68 19.68 20.24 115.78 5.61 6.44 6.57 21.97 8.15 15.43 15.43 24.94 35.42 35.42 24.94 35.42 35.42 6.14 6.14 24.94 35.42 35.42 34.44 48.33 48.33 14.10 14.10 34.44 48.33 48.33 33.92 48.33 48.33 33.92 48.33 48.33 25.14 33.93 Weather Stripping Weather Stripping Weather Stripping Weather Stripping Rain Drip Rain Drip Rain Drip Threshold Threshold Weather Stripping Weather Stripping Weather Stripping Weather Stripping Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Replacement Gasket Replacement Gasket Gasketing Gasketing Gasketing Meeting Stile Meeting Stile Meeting Stile Replacement Gasket Replacement Gasket Meeting Stile Meeting Stile Meeting Stile Meeting Stile Meeting Stile Meeting Stile Meeting Stile Meeting Stile Meeting Stile Door Sweep Door Sweep 39N 39WA 39WD 39WN 40AA 40D 41AA 41D 43SP 43STST 44XA $ $ $ $ $ $ $ $ $ $ $ 4.03 10.50 14.06 6.83 17.01 25.39 15.02 16.22 14.28 29.87 24.42 $ $ $ $ $ $ $ $ $ $ $ 13.24 34.44 46.11 22.41 55.80 83.27 49.28 53.21 46.86 98.00 80.13 Replacement Gasket Door Sweep Door Sweep Replacement Gasket Meeting Stile Meeting Stile Meeting Stile Meeting Stile Meeting Stile Meeting Stile Meeting Stile 44STST 47A 50A 50MA 50MN 51A-90 51A-180 51N-5-GY 51N-6-GY 51N-8-GY 52A 52N 53A 53N $ 17.88 $ 8.72 $ 6.15 $ 6.94 $ 3.02 $ 14.13 $ 15.10 $ 4.08 $ 8.95 $ 12.66 $ 9.98 $ 4.99 $ 7.59 $ 3.94 $ $ $ $ $ $ $ $ $ $ $ $ $ $ 58.70 28.58 20.18 22.77 9.93 46.39 49.55 13.41 29.37 41.58 32.72 16.38 24.94 12.93 Meeting Stile Meeting Stile Gasketing Door Sweep Replacement Gasket Finger Guard Finger Guard Replacement Gasket Replacement Gasket Replacement Gasket Door Sweep Replacement Gasket Door Sweep Replacement Gasket DESCRIPTION Bronze Jamb 1 3/4" (44.5) Top Sash Zinc Jamb 1 3/4" (44.5) Top Sash Bronze Jamb 2 1/8" (54.0) Lower Sash Zinc Jamb 2 1/8" (54.0) Lower Sash Aluminum Rain Drip Dark Bronze Anodized Rain Drip Gold Anodized Rain Drip Aluminum Butt Threshold 1.4"(35.6) Bronze ButtThreshold 1.4"(35.6) Cushion Bronze 9/16" (14.2) Cushion Bronze 3/4" (19.1) Cushion Bronze 1 1/8" (28.6) Bronze Sill Hook Clear Anodized Extruded Aluminum Angle Dark Bronze Anodized Angle Gold Anodized Angle Clear Anodized Bumper Strip / Silicone Dark Bronze Anod. Bumper Strip/ Silicone Gold Anodized Bumper Strip/ Silicone Clear Anodized Bumper Strip / Brush Dark Bronze Anodized Bumper Strip/ Brush Gold Anodized Bumper Strip / Brush Self Adhesive Pile Brush, Black Self Adhesive Pile Brush, Gray Clear Anodized / Silicone Lip Dark Bronze Anodized / Silicone Lip Gold Anodized / Silicone Lip Clear Anodized / Brush / Adjustable Dark Bronze Anodized / Brush / Adjustable Gold Anodized / Brush / Adjustable Self Adhesive Pile Brush, Black Self Adhesive Pile Brush, Gray Clear Anodized/ Silicone Lip/ Adjustable Dark Bronze Anod./ Silicone Lip/ Adjustable Gold Anodized/ Silicone Lip/ Adjustable Clear Anodized/ Silicone Lip/ Adjustable Dark Bronze Anod./ Silicone Lip/ Adjustable Gold Anodized / Silicone Lip/ Adjustable Clear Anodized / Solid Insert Dark Bronze Anodized / Solid Insert Gold Anodized / Solid Insert Aluminum / Solid Neoprene 1/2"(12.7) Dark Bronze Anodized/Solid Neoprene 1/2" (12.7) 1-3/8" Tall Sweep Seal - Neoprene Aluminum / Solid Neoprene 1 1/4" (31.8) Dark Bronze Anodized /Solid Neoprene 1 1/4" 2" Tall Sweep Seal - Neoprene Clear Anodized Astragal / Magnet Vinyl Dark Bronze Anod. Astragal/ Magnet Vinyl Clear Anodized Security Astragal Dark Bronze Anodized Security Astragal Steel Prime Astragal 2 1/4" (57.2) Stainless Steel Astragal 2 1/4" (57.2) Aluminum 1.470" (37.3) x .375"(9.5) Lead Lined Stainless Steel Astragal 1 1/2" (38.1) Aluminum shim 1 3/4"(44.5) x 1/8"(3.2) Aluminum / Neoprene Aluminum / Beveled Neoprene 1" Tall Beveled Sweep Seal - Neoprene 6.5" W rubber, grey. For doors that open to 90° 8.5" W rubber, grey. For doors that open to 180° 1/16" Flexible Strip - EPDM Rubber 6" Wide EPDM Gray 8" Wide EPDM Gray Neoprene in Aluminum Track, 1 7/16"(36.5) 1.64" Wide Track Seal - Neoprene Neoprene in Aluminum Track, 3/4"(19.1) 1.06 Wide Track Seal - Neoprene PART NUMBER LIST PRICE LIST PRICE PER FOOT PER METER TYPE 55AA $ 20.84 $ 68.37 Meeting Stile 55D $ 30.56 $ 100.29 Meeting Stile 55FS-AA $ 27.67 $ 90.79 Meeting Stile 55FS-D $ 34.69 $ 113.81 Meeting Stile 56AA 56D $ 20.84 $ 30.56 $ 68.37 $ 100.29 Meeting Stile Meeting Stile 56G 56FS-AA 56FS-D 56FS-G 58FS-AA 58FS-D 58FS-G 59FS-A $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ Meeting Stile Meeting Stile Meeting Stile Meeting Stile Gasketing Gasketing Gasketing Gasketing 59N 63A 64A 65A $ 2.37 $ 8.26 $ 5.94 $ 18.05 $ 7.79 $ 27.12 $ 19.50 $ 59.23 Replacement Gasket Threshold Threshold Threshold 65B $ 116.08 $ 380.84 Threshold 68A 68B 69A 70B 72A 72N 73A 76B 80B 84R $ $ $ $ $ $ $ $ $ $ 6.17 29.57 5.94 57.92 12.16 6.93 13.81 85.96 78.48 6.32 $ 20.24 $ 97.04 $ 19.50 $ 190.04 $ 39.91 $ 22.75 $ 45.34 $ 282.04 $ 257.52 $ 20.75 Threshold Threshold Threshold Threshold Door Sweep Replacement Gasket Threshold Threshold Threshold Threshold 93 93N 95A 96P 96A 98A 98A-PSA 98D 98D-PSA 99A 99D 100A 100D 102A 103A 104A 105A 105B 106A 110A 111A 111FS-A 117S-BK 118B 119B 119WB 133 134 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ 16.63 2.37 10.43 10.57 17.93 6.78 7.21 10.02 10.45 6.78 10.08 6.78 10.02 13.98 17.05 16.10 15.42 63.84 11.30 10.64 10.64 11.55 1.38 2.11 2.66 2.97 8.68 8.68 $ 54.59 $ 7.79 $ 34.24 $ 34.72 $ 58.81 $ 22.22 $ 23.67 $ 32.85 $ 34.28 $ 22.22 $ 33.07 $ 22.22 $ 32.85 $ 45.86 $ 55.97 $ 52.84 $ 50.58 $ 209.47 $ 37.04 $ 34.90 $ 34.90 $ 37.90 $ 4.52 $ 6.92 $ 8.74 $ 9.75 $ 28.48 $ 28.48 Gasketing Replacement Gasket Gasketing Replacement Gasket Door Sweep Gasketing Meeting Stile Gasketing Meeting Stile Gasketing Gasketing Gasketing Gasketing Threshold Threshold Threshold Threshold Threshold Threshold Door Sweep Door Sweep Door Sweep Weather Stripping Weather Stripping Weather Stripping Weather Stripping Meeting Stile Meeting Stile 135 136 137 137P-BK-PSA 137P-GY-PSA $ $ $ $ $ 5.38 7.46 7.12 2.33 2.33 $ 17.62 $ 24.46 $ 23.36 $ 7.64 $ 7.64 Meeting Stile Meeting Stile Meeting Stile Miscellaneous Miscellaneous 30.56 26.41 36.04 36.04 10.14 12.93 12.93 16.41 100.29 86.66 118.22 118.22 33.25 42.42 42.42 53.84 DESCRIPTION Clear Anodized / Solid Insert /Adjustable Astragal Dark Bronze Anodized / Solid Insert Intumescent, Adjustable Surface Astragal Clear Anodized / Solid Insert Intumescent, Adjustable Surface Astragal Dark Bronze Anodized / Solid Insert Intumescent, Adjustable Surface Astragal Clear Anodized Adjustable Mortised Astragal Dark Bronze Anodized / Solid Insert Intumescent, Adjustable Mortised Astragal Gold Anodized Adjustable Mortised Astragal Clear Anodized Intumescent Fire Stop Dark Bronze Anod. Intumescent Fire Stop Gold Anodized Intumescent Fire Stop Clear Anodized Intumescent Fire Stop Dark Bronze Intumescent Fire Stop Gold Anodized Intumescent Fire Stop Aluminum / Intumescent / Neoprene Blade PSA Lip Seal for Mortise Aluminuminum Track AluminumThreshold 3"(76.2) x 1/4"(6.4) AluminumThreshold 2 1/2" (63.5) AluminumThreshold / Silicone Stop 5" (127.0) wide 1/2" (12.7) high BronzeThreshold / Silicone Stop 5" (127.0) wide 1/2" (12.7) high AluminumThreshold Rest 1/2" (12.7) BronzeThreshold Rest 1/2" (12.7) Aluminum Plate 1/4"(6.4) x 1 1/8"(28.6) BronzeThreshold 3" (76.2) Neoprene in Aluminum Track 2-5/8" Wide Neoprene Strip Aluminum 4"(10.6) / Neoprene Stop Bronze / Water Return option 3 1/2" (88.9) Bronze 4 1/4" (108.0) Traction Tread Neoprene 1" (25.4) Wide x 1/4" (6.4) Thick 3" (76.2) Loop Neoprene 3" Wide Bulb Seal-Neoprene Aluminum / Neoprene 1.125" Nylon Brush Aluminum / Brush Aluminum / Brush Aluminum / Brush / PSA Dark Bronze Anodized / Brush Dark Bronze Anodized / Brush / PSA Aluminum / Silicone Dark Bronze Anodized / Silicone Aluminum / Silicone Lip Dark Bronze Anodized / Silicone Lip Aluminum 5 1/2" (139.7) Off SetThreshold Aluminum 7" (177.8) Off SetThreshold Aluminum 6" (152.4) Off SetThreshold Aluminum Bulkhead DoorThreshold 3" (76.2) Bronze Bulkhead DoorThreshold 1 7/8" (47.6) Aluminum Bulkhead DoorThreshold 3/4" (19.1) Aluminum Door Shoe / Pile Aluminum Door Shoe / Neoprene Aluminum Door Shoe / Intumescent Black Silicone Seal / Self Adhesive Cushion Bronze / Adhesive 9/16" (14.2) Cushion Bronze / Adhesive 3/4" (19.1) Cushion Bronze / Adhesive 1 1/8"(28.6) Glass Edge Protection 1/2"(12.7) PVC/ Brush Glass Edge Protection 1/2"(12.7) PVC/ Neoprene Glass Edge Protection 1/2"(12.7) PVC Glass Edge Protection 3/4"(19.1) PVC PVC/ Pile for 1/2" (12.7) Glass Door Pile Brush / Black / PSA Pile Brush / Gray / PSA Price Book 3 Effective August 12, 2017 • Rev. 08/17 9 PART NUMBER LIST PRICE LIST PRICE PER FOOT PER METER TYPE 138 139A 139D 139N 139N-PSA 140A 141AA 142AA 142D 142G 144AA 153A 153D 153N 154A 154D 155AA $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ 155D $ 32.09 $ 105.30 Meeting Stile 156AA $ 20.84 $ 68.37 Meeting Stile 156D $ 30.56 $ 100.29 Meeting Stile 156G $ 30.56 $ 100.29 Meeting Stile 159FS-A 164A $ $ 14.31 14.51 $ 46.95 $ 47.63 Meeting Stile Threshold 164B 164STST $ 55.11 $ 126.54 $ 180.84 $ 415.15 Threshold Threshold 168A 168B 170AA 170D 170G 175A 175B 188BIO 188FS 188S-BK 188S-BR 188S-CL 188S-GY 188S-WH 221 - 226 $ 10.39 $ $ 34.44 $ $ 22.21 $ $ 29.38 $ $ 29.38 $ $ 16.56 $ $ 102.43 $ $ 1.98 $ $ 3.33 $ $ 1.80 $ $ 1.80 $ $ 1.80 $ $ 1.80 $ $ 1.80 $ See back cover 232A $ 26.16 $ 85.83 Threshold 233A 234A $ $ 11.92 11.92 $ 39.10 $ 39.10 Threshold Threshold 235A $ 11.92 $ 39.10 Threshold 236A 237A 238A 253A 253FS-A 254A 254P-GY 255AA $ $ $ $ $ $ $ $ 15.78 17.34 17.34 5.71 16.87 6.15 4.89 20.46 $ $ $ $ $ $ $ $ Threshold Threshold Threshold Door Sweep Door Sweep Door Sweep Replacement Gasket Door Sweep 255D $ 29.55 $ 96.98 Door Sweep 259R 265A 267A 268A 268B 269A $ $ $ $ $ $ $ $ $ $ $ $ Threshold Threshold Threshold Threshold Threshold Threshold 9.26 7.38 9.93 3.34 5.34 9.34 8.49 7.29 12.29 12.29 3.95 9.58 14.45 4.75 10.95 14.72 21.88 28.76 16.40 13.24 5.41 26.89 6.61 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ 30.36 24.21 32.59 10.95 17.54 30.62 27.87 23.92 40.33 40.33 12.97 31.43 47.41 15.58 35.90 48.29 71.80 34.10 113.00 72.86 96.39 96.39 54.34 336.11 6.50 10.92 5.92 5.92 5.92 5.92 5.92 51.81 56.89 56.89 18.74 55.34 20.18 16.07 67.13 94.37 53.81 43.45 17.73 88.21 21.70 Meeting Stile Gasketing Gasketing Replacement Gasket Replacement Gasket Gasketing Rain Drip Rain Drip Rain Drip Rain Drip Gasketing Door Sweep Door Sweep Replacement Gasket Door Sweep Door Sweep Meeting Stile Threshold Threshold Gasketing Gasketing Gasketing Threshold Threshold Weather Stripping Weather Stripping Weather Stripping Weather Stripping Weather Stripping Weather Stripping Weather Stripping Fasteners DESCRIPTION PVC/ Pile for 3/4" (19.1) Glass Door Aluminum / Neoprene Dark Bronze Anodized / Neoprene Neoprene 1 1/4"(31.8) x 3/16"(3.2) Neoprene 1 1/4"(31.8) x 3/16"(3.2) with PSA Aluminum / Neoprene Clear Anodized Extruded Rain Drip Clear Anodized Extruded Rain Drip Dark Bronze Anodized Rain Drip Gold Anodized Rain Drip Clear Anodized Extruded Hook / Silicone Tube Aluminum / Neoprene Dark Bronze Anodized / Neoprene Thin Neoprene - Five Finger Extrusion Aluminum Angle Track / Pile Dark Bronze Anodized Angle Track / Pile Clear Anodized / Pile Brush Surface Mounted, Adjustable Astragal Dark Bronze Anodized / Pile Brush Surface Mounted, Adjustable Astragal Clear Anodized / Pile Brush, Mortised, Adjustable Dark Bronze Anodized / Pile Brush Mortised, Adjustable Astragal Gold Anodized / Pile Brush Mortised, Adjustable Astragal Aluminum Track Intumescent Fire Stop Aluminum / Smooth Top 4" (101.6) x 1/2" (12.7) Bronze / Smooth Top 4" (101.6) x 1/2" (12.7) Stainless Steel/ Smooth Top 4"(101.6) x 1/2"(12.7) AluminumThreshold Rest 3/4" (19.1) BronzeThreshold Rest 3/4" (19.1) Clear Anodized / Adjustable Sound Seal Dark Bronze Anodized / Adjustable Sound Seal Gold Anodized / Adjustable Sound Seal Aluminum / Water Return option 5"(127.0) Bronze / Water Return option 5"(127.0) Antibacterial Rubber / White / PSA Intumescent/ Silicone/ PSA Silicone / Black / PSA Silicone / Brown / PSA Silicone / Clear / PSA Silicone / Grey / PSA Silicone / White / PSA OptionalThreshold Anchors. See back cover for more information. Aluminum Ramp 6" (152.4) 1/2"(12.7) to 1"(25.4) Ramp Aluminum Ramp 3" (76.2) Aluminum Ramp 3" (76.2) 1/4"(6.4) to 1/2"(12.7) Ramp Aluminum Ramp 3" (76.2), 0 to 1/4"(6.4) Ramp Aluminum Ramp 6" (152.4) Aluminum Ramp 3 1/2" (88.9), 1/4"to 1/2" Aluminum Ramp 3 1/2" (88.9), 1/4" to 3/4" Aluminum / Neoprene Insert / Mortised Aluminum / Intumescent Fire Stop / Mortised Aluminum Track / Pile Insert / Mortised .875" x 2" wide Poly Pile Clear Anodized / Adjustable Surface Sweep with Spring / Pile Insert Dark Bronze Anodized / Adjustable urface Sweep with Spring / Pile Insert Rubber ramp 6" (152.4) x 1/2" (12.7) Aluminum 5" (127.0) / Neoprene Stop Aluminum 2.155" (54.7) / Neoprene Stop AluminumThreshold Rest 3/8" (9.5) BronzeThreshold Rest 3/8" (9.5) Aluminum Assembly Connector Price Book 3 10 PART NUMBER LIST PRICE LIST PRICE PER FOOT PER METER TYPE 270A 272A 302FS-AA 302FS-B 302FS-D 302FS-G $ 9.62 $ 9.62 $ 8.90 $ 24.07 $ 11.75 $ 11.75 $ $ $ $ $ $ 31.55 31.55 29.22 79.01 38.53 38.53 Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing 304A 304D $ $ $ 22.23 $ 28.94 Threshold Threshold 304G 312A 312N 312N-PSA 314AA 314B 314D 314G 314N $ 8.82 $ 5.20 $ 1.38 $ 1.67 $ 8.24 $ 20.85 $ 9.46 $ 9.46 $ 2.18 $ $ $ $ $ $ $ $ $ 28.94 17.04 4.53 5.48 27.06 68.44 31.01 31.01 7.17 Threshold Gasketing Replacement Gasket Gasketing Gasketing Gasketing Gasketing Gasketing Replacement Gasket 314N-PSA $ 3.62 $ 11.90 Replacement Gasket 318AA 318D 318G 318N $ 9.70 $ 10.79 $ 10.79 $ 3.08 $ 31.81 $ 35.42 $ 35.42 $ 10.11 Gasketing Gasketing Gasketing Gasketing 318N-PSA $ 5.19 $ 17.03 Replacement Gasket 319N 320AA 326AA 326B 326D 326G 326N 328AA 328B 328D 328G 328FS-AA $ 0.28 $ 56.42 $ 47.01 $ 50.10 $ 62.63 $ 77.67 $ 3.86 $ 62.39 $ 53.11 $ 68.38 $ 85.60 $ 106.98 $ 76.40 $ 63.67 $ 88.05 $ 110.03 $ 137.53 $ 9.70 $ 55.05 $ 45.88 $ 48.89 $ 61.10 $ 76.35 $ 8.89 $ 22.71 $ 11.98 $ 11.98 $ 4.70 $ 8.60 $ 20.85 $ 11.61 $ 11.61 $ 12.69 $ 0.93 each each each each each $ 12.68 each each each each each each each each each each $ 31.81 each each each each each $ 29.17 $ 74.52 $ 39.30 $ 39.30 $ 15.45 $ 28.24 $ 68.44 $ 38.13 $ 38.13 $ 41.63 Replacement Gasket 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) Replacement Gasket 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) Gasketing 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) Gasketing Gasketing Gasketing Gasketing Replacement Gasket Gasketing Gasketing Gasketing Gasketing Gasketing 328FS-D $ 16.81 $ 55.16 Gasketing 328FS-G $ 16.81 $ 55.16 Gasketing 328N 328SPB 329AA 329B 329D $ $ $ $ $ $ 13.45 each $ 22.77 $ 63.06 $ 35.16 Replacement Gasket General Gasketing Gasketing Gasketing 320N 321AA 321D 322A 323AA Effective August 12, 2017 • Rev. 08/17 6.78 8.82 4.10 28.95 6.94 19.22 10.72 DESCRIPTION Aluminum Door Stop / Neoprene Aluminum Door Stop / Neoprene Clear Anodized/ Neoprene/ Intumet Fire Stop Bronze / Neoprene Intumescent Fire Stop Dark Bronze Anodized / Neoprene / Gold Anodized / Neoprene Intumescent Fire Stop Aluminum ButtThreshold1 1/2" (38.1) wide Dark Bronze Anodized ButtThreshold 1 1/2" (38.1) wide Gold Anodized ButtThreshold 1 1/2" (38.1) Aluminum / Neoprene Neoprene, 3/16"(4.7) x 1/2"(12.7) Neoprene with PSA 3/16"(4.7) x 1/2"(12.7) Clear Anodized / Neoprene Bronze / Neoprene Dark Bronze Anodized / Neoprene Gold Anodized / Neoprene .75"X.125" Closed Cell Sponge Neoprene Rectangular Extrusion .75"X.125" Closed Cell Sponge Neoprene Rectangular Extrusion W/PSA Clear Anodized / Neoprene Dark Bronze Anodized / Neoprene Gold Anodized / Neoprene Closed Cell Sponge Neoprene Black 3/8"(9.5) x 3/4"(19.1) Closed Cell Sponge Neoprene Black 3/8"(9.5) x 3/4"(19.1) with PSA Noise Block Rubber Clear Anodized / Economical Mortised Automatic Door Bottom .406" Wide Split Bulb Seal - Neoprene Clear Anodized / Economical Mortised Automatic Door Bottom Dark Bronze Anodized / Economical Mortised Automatic Door Bottom Clear Anodized / Mortised, Automatic Door Bottom Clear Anodized / Neoprene Bronze / Neoprene Dark Bronze Anodized / Neoprene Gold Anodized/ Neoprene 1.006" Wide Dual Bulb and Lip Seal - Neoprene Clear Anodized/ Neoprene Bronze / Neoprene Dark Bronze Anodized / Neoprene Gold Anodized / Neoprene Clear Anodized / NeopreneIntumescent Fire Stop Dark Bronze Anodized / Neoprene Intumescent Fire Stop Gold Anodized / Neoprene Intumescent Fire Stop 7/8" Wide Neoprene Insert Steel Prime Closer Plate Bracket. Clear Anodized w/ Beveled Neoprene Bronze with Beveled Neoprene Dark Bronze Anod. / Beveled Neoprene PART NUMBER LIST PRICE LIST PRICE PER FOOT PER METER TYPE 329G 339AA 339B 339D 339G 339FS-AA 339FS-D 339WAA 339WB 339WD 339WG 350A $ 10.72 $ 7.66 $ 20.85 $ 11.76 $ 11.76 $ 12.69 $ 16.52 $ 10.50 $ 21.78 $ 13.99 $ 13.99 $ 73.25 $ 55.38 $ 59.00 $ 73.70 $ 92.21 $ 78.28 $ 62.58 $ 66.32 $ 136.78 $ 108.38 $ 126.49 $ 83.75 $ 67.00 $ 80.49 $ 100.66 $ 125.84 $ 72.56 $ 86.05 $ 90.68 $ 143.57 $ 111.76 $ 131.74 $ 93.67 $ 74.91 $ 103.53 $ 129.44 $ 161.81 $ 100.80 $ 80.62 $ 109.45 $ 157.18 $ 124.48 $ 157.18 $ 4.19 $ 83.75 $ 67.00 $ 80.49 $ 100.66 $ 125.84 $ 72.56 $ 86.05 $ 90.68 $ 143.57 $ 111.76 $ 131.74 $ 93.67 $ 74.91 $ 103.53 $ 129.44 $ 161.81 $ 100.80 $ 80.62 $ 109.45 $ 157.18 $ 124.48 $ 157.18 $ 55.52 $ 62.92 $ 77.13 350A-LS 350A-X 351AA 351AA-LS 351AA-X 351D 351D-LS 351D-X 351S-BK 352AA 352AA-LS 352AA-X 352D 352D-LS 352D-X 355A $ 35.16 $ 25.14 $ 68.44 $ 38.56 $ 38.56 $ 41.63 $ 54.21 $ 34.44 $ 71.48 $ 45.89 $ 45.89 each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each $ 13.76 each each each each each each each each each each each each each each each each each each each each each each each each each Gasketing Gasketing Gasketing Gasketing Gasketing Door Sweep Door Sweep Gasketing Gasketing Gasketing Gasketing 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 12"-18" (305-457) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) Replacement Gasket 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) DESCRIPTION Gold Anodized / Beveled Neoprene Clear Anodized / Neoprene Bronze / Neoprene Dark Bronze Anodized / Neoprene Gold Anodized / Neoprene Clear Anodized / Neoprene/ Intumet Dark Bronze Anod./Neoprene/ Intumet Clear Anodized / Neoprene Bronze / Neoprene Dark Bronze Anodized / Neoprene Gold Anodized / Neoprene Clear Anodized / Mortised Automatic Door Bottom PART NUMBER LIST PRICE LIST PRICE PER FOOT PER METER TYPE 360AA $ 101.02 $ 80.79 $ 91.67 $ 114.65 $ 147.83 $ 118.42 $ 93.46 $ 103.62 $ 129.54 $ 161.94 $ 157.06 $ 125.63 $ 131.32 $ 164.17 $ 205.21 $ 157.06 $ 125.63 $ 131.32 $ 164.17 $ 205.21 $ 118.42 $ 93.46 $ 103.62 $ 129.54 $ 161.94 $ 157.06 $ 125.63 $ 131.32 $ 164.17 $ 205.21 $ 157.06 $ 125.63 $ 131.32 $ 164.17 $ 205.21 $ 4.99 $ 103.30 $ 82.59 $ 93.49 $ 116.91 $ 146.13 $ 117.31 $ 138.62 $ 204.54 $ 245.25 $ 117.58 $ 94.03 $ 105.68 $ 121.49 $ 97.16 $ 112.88 $ 141.11 $ 176.37 $ 161.81 $ 129.44 $ 131.32 $ 164.17 $ 205.21 $ 241.70 $ 305.07 $ 368.45 $ 161.81 $ 129.44 $ 131.32 $ 164.17 $ 205.21 $ 130.86 $ 157.03 $ 233.23 $ 279.85 361AA 361D 361G Clear Anodized / Mortised Automatic Door Bottom / Light Spring - Low Force Clear Anodized / Mortised Automatic Door Bottom / Lead-Lined 362AA Clear Anodized Automatic Door Bottom 362D Clear Anodized Automatic Door Bottom / Light Spring - Low Force 362G Clear Anodized Automatic Door Bottom, Lead Lined, Regular Duty Dark Bronze Anodized Automatics Door Bottom 363N 364AA Dark Bronze Anodized Automatic Door Bottom - Light Spring - Low Force 364FS-AA Dark Bronze Anodized Automatic Door Bottom, Lead Lined, Regular Duty .433" Wide Silicone Extrusion Clear Anodized Automatic Door Bottom 364LS-AA 365AA Clear Anodized Automatic Door Bottom / Light Spring - Low Force Clear Anodized Automatic Door Bottom, Lead Lined, Regular Duty Dark Bronze Anodized Automatic Door Bottom Dark Bronze Anodized Automatic Door Bottom - Light Spring - Low Force Dark Bronze Anodized Automatic Door Bottom, Lead Lined, Regular Duty 365D 365EMI 365G 365FS-AA Aluminum / Mortised Automatic Door Bottom Regular Duty each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each $ 16.38 each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) Replacement Gasket 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) DESCRIPTION Clear Anodized / Mortised Automatic Door Bottom Heavy Duty Clear Anodized Automatic Door Bottom/Heavy Duty Dark Bronze Anodized Automatic Door Bottom/Heavy Duty Gold Anodized Automatic Door Bottom/Heavy Duty Clear Anodized Automatic Door Bottom/Heavy Duty Dark Bronze Anodized Automatic Door Bottom/Heavy Duty Gold Anodized Automatic Door Bottom/Heavy Duty .656" Wide Sponge Neoprene Clear Anodized / Mortised Automatic Door Bottom/Heavy Duty Clear Anodized / Mortised Automatic Door Bottom/Heavy Duty/Intumescent Clear Anodized/ Mortised Automatic Door Bottom/ Light Spring -Low Force Clear Anodized/Automatic Door Bottom / Heavy Duty Dark Bronze Anodized/Automatic Door Bottom / Heavy Duty Irridated Finish/Automatic Door Bottom/ Heavy Duty/ For EMI-RFI Gold Anodized/Automatic Door Bottom / Heavy Duty Clear Anodized/Automatic Door Bottom/Heavy Duty/Intumescent Price Book 3 Effective August 12, 2017 • Rev. 08/17 11 PART NUMBER LIST PRICE LIST PRICE PER FOOT PER METER TYPE 365FS-D $ 165.32 $ 177.25 $ 264.48 $ 317.36 $ 165.32 $ 177.25 $ 264.48 $ 317.36 $ 128.34 $ 102.70 $ 118.44 $ 168.93 $ 135.15 $ 137.07 $ 5.43 $ 168.93 $ 135.15 $ 137.07 $ 1.04 $ 121.49 $ 97.16 $ 112.88 $ 141.11 $ 176.37 $ 161.81 $ 129.44 $ 131.32 $ 164.17 $ 205.21 $ 161.81 $ 129.44 $ 131.32 $ 164.17 $ 205.21 $ 130.86 $ 157.03 $ 233.23 $ 279.85 $ 165.32 $ 177.25 $ 264.48 $ 317.36 $ 165.32 $ 177.25 $ 264.48 $ 317.36 $ 128.34 $ 102.70 $ 118.44 $ 168.93 $ 135.15 $ 137.07 $ 168.93 $ 135.15 $ 137.07 $ 158.80 $ 122.14 $ 140.45 $ 182.12 $ 144.47 $ 166.18 $ 182.12 $ 144.47 $ 166.18 $ 4.27 $ 158.80 $ 122.14 $ 140.45 $ 182.12 $ 144.47 $ 166.18 365FS-G 365LS-AA 365LS-D 365N 365LS-G 365Y 366AA 366D 366G 366FS-AA 366FS-D 366FS-G 366LS-AA 366LS-D 366LS-G 367AA 367D 367G 367N 368AA 368D each each each each each each each each each each each each each each $ 17.82 each each each $ 3.41 each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each $ 14.03 each each each each each each 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) Replacement Gasket 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) Replacement Gasket 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) Replacement Gasket 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) DESCRIPTION Clear Anodized/Automatic Door Bottom/Heavy Duty/Intumescent LIST PRICE LIST PRICE PER FOOT PER METER TYPE 368G 370A 370D 375AA 375D 376AA 376D 381A 383AA 383D 383FS-AA 383FS-D 383N 398V 399V 400B $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ 182.12 144.47 166.18 139.29 104.74 120.43 16.21 24.90 17.66 23.61 11.87 15.85 7.88 10.71 12.21 15.84 21.45 2.36 6.63 6.63 11.19 400Z $ 3.01 426A 428A 429AA $ 10.34 $ 10.34 $ 10.43 $ 33.92 $ 33.92 $ 34.24 Gasketing Gasketing Gasketing 452A 469A 470AA 470D 472AA 475AA $ $ $ $ $ $ 10.50 5.27 16.28 21.36 20.14 8.53 $ $ $ $ $ $ Door Sweep Threshold Gasketing Gasketing Gasketing Gasketing 475D $ 12.51 $ 41.05 Gasketing 475G $ 12.51 $ 41.05 Gasketing 477AA 477D $ $ 8.24 11.76 $ 27.06 $ 38.56 Door Sweep Door Sweep 477G 478AA $ $ 11.76 12.01 $ 38.56 $ 39.40 Door Sweep Gasketing 478D $ 16.07 $ 52.74 Gasketing 485A 485D 485G 486N $ $ $ $ 5.78 8.86 8.86 3.43 $ 18.96 $ 29.05 $ 29.05 $ 11.28 Gasketing Gasketing Gasketing Replacement Gasket 488BIO 488FS 488S-BK 488S-BR 488S-CL 488S-GY 488S-WH 500B $ 1.51 $ 2.89 $ 1.38 $ 1.38 $ 1.38 $ 1.38 $ 1.38 $ 12.26 $ 4.97 $ 9.50 $ 4.52 $ 4.52 $ 4.52 $ 4.52 $ 4.52 $ 40.21 Weather Stripping Weather Stripping Weather Stripping Weather Stripping Weather Stripping Weather Stripping Weather Stripping Weather Stripping 500Z $ 3.94 $ 12.94 Weather Stripping 511A 520A 521FS A $ 11.20 $ 10.23 $ 22.07 $ 36.76 $ 33.58 $ 72.39 Door Sweep Gasketing Door Sweep 521S-BK 522A 523A 524A 525A $ 5.74 $ 7.01 $ 15.35 $ 17.59 $ 25.58 $ $ $ $ $ Replacement Gasket Threshold Threshold Threshold Threshold 369AA Clear Anodized/Automatic Door Bottom/Heavy Duty/Intumescent Clear Anodized/Automatic Door Bottom/Light Spring-Low Force Dark Bronze Anodized/Automatic Door Bottom/Light Spring-Low Force .735" Wide Bulb Seal - Neoprene Gold Anodized/Automatic Door Bottom/Light Spring-Low Force Anti-Squeak Rubber for ABD Clear Anodized/Automatic Door Bottom / Heavy Duty Dark Bronze Anodized/Automatic Door Bottom / Heavy Duty Gold Anodized/Automatic Door Bottom / Heavy Duty Anodized/Automatic Door Bottom/Heavy Duty/Intumescent Dark Bronze Anodized/Automatic Door Bottom/Heavy Duty/Intumescent Gold Anodized/Automatic Door Bottom/Heavy Duty/Intumescent Clear Anodized/Automatic Door Bottom/Light Spring-Low Force Dark Bronze Anodized/Automatic Door Bottom/Light Spring-Low Force Gold Anodized/Automatic Door Bottom/Light Spring-Low Force Clear Anodized/Automatic Door Bottom/ Heavy Duty/Acoustic Sound Reduction Dark Bronze Anodized/Automatic Door Bottom/Heavy Duty/Acoustic Sound Reduction Gold Anodized/Automatic Door Bottom/Heavy Duty/Acoustic Sound Reduction Double Wrap ADB Seal - Neoprene Clear Anodized/Automatic Door Bottom/Heavy Duty/Acoustic Sound Reduction Dark Bronze Anodized/Automatic Door Bottom/Heavy Duty/Acoustic Sound Reduction Price Book 3 12 PART NUMBER Effective August 12, 2017 • Rev. 08/17 each each each each each each $ 53.18 $ 81.70 $ 57.93 $ 77.47 $ 38.92 $ 51.99 $ 25.87 $ 35.12 $ 40.04 $ 51.98 $ 70.38 $ 7.76 $ 21.77 $ 21.77 $ 36.73 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Meeting Stiles Meeting Stiles Meeting Stiles Meeting Stiles Replacement Gasket Meeting Stiles Meeting Stiles Weather Stripping $ Weather Stripping 9.87 34.44 17.28 53.40 70.06 66.08 27.99 18.86 22.98 50.36 57.73 83.92 DESCRIPTION Gold Anodized/Automatic Door Bottom/Heavy Duty/Acoustic Sound Reduction Clear Anodized/Mortised Automatic Door Bottom/Heavy Duty/Acoustic Sound Reduction Aluminum / Magnetic Seal Dark Bronze Anodized / Magnetic Seal Clear Anodized/ Magnetic/ Snap-On Cover Dk Bronze Anod./ Magnetic/ Snap-On Cover Clear Anodized / Neoprene / Snap-On Cover Dk Bronze Anod./ Neoprene/Snap-On Cover Aluminum / Double Neoprene Lip Clear Anodized / Double Neoprene Dark Bronze Anodized / Double Neoprene Clear Anodized / Neoprene / Intumescent Dark Brown Anod./ Neoprene/ Intumescent .687" Tall Tapered Lip Seal - Neoprene Solid PVC Brown / Pile with Fin Seal / PSA Solid PVC Brown / Silicone lips/ PSA Bronze Side Jamb without Return Flange 1 3/4" (44.5) Zinc Side Jamb without Return Flange 1 3/4" (44.5) Aluminum/Neoprene Aluminum / Neoprene for Door Closers Clear Anodized with Silicone Gasket for use with Coordinator or Closer Bracket Aluminum Track / Neoprene Aluminum Assembly Connector Clear Anodized Security Seal/ Neoprene Dark Bronze Anod. Security Seal/ Neoprene Clear Anodized Security Seal / Neoprene Clear Anodized / Snap-On Cover / Neoprene Seal Dark Bronze Anodized / Snap-On Cover / Neoprene Seal Gold Anodized / Snap-On Cover /Neoprene Seal Clear Anodized/ Neoprene/ Snap-On Cover Dark Bronze Anodized / Neoprene / Snap on Cover Gold Anodized/ Snap-On Cover/ Neoprene Clear Anodized / Snap-On Cover / Double Neoprene Dark Bronze Anodized / Snap-On Cover / Double Neoprene Aluminum / Neoprene Dark Bronze Anodized / Neoprene Gold Anodized / Neoprene .36" Wide Dual Lip and Bulb .176" Wide Base-Neoprene Antibacterial Rubber / White / PSA Intumescent / Silicone / PSA Silicone Seal with PSA, black color Silicone Seal with PSA, brown color Silicone Seal with PSA, clear Silicone Seal with PSA, gray color Silicone Seal with PSA, white color Bronze Side Jamb without Return Flange 2 1/8"(53.1) Zinc Side Jamb without Return Flange 2 1/8"(53.1) Aluminum / Rubber 1/16"(1.6) thick Aluminum / Double Neoprene Aluminum/ Intumescent/ Flame Retardant Silicone,for undercut doors 1.938" Tall Rectangular Seal - Silicone AluminumThreshold 1/2" (12.7) High Aluminum ButtThreshold 3" (76.2) Aluminum ButtThreshold 3"(76.2)/ Neoprene Aluminum Thermal BreakThreshold 5" (127.0) / Neoprene PART NUMBER LIST PRICE LIST PRICE PER FOOT PER METER TYPE 526A $ 28.13 $ 92.31 Threshold 539AA 539D 539N 544A 545A 545B 545D $ $ $ $ $ $ $ 9.48 14.23 2.37 10.23 12.25 50.38 24.19 $ $ $ $ $ $ $ 31.09 46.67 7.79 33.56 40.18 165.30 79.38 Gasketing Gasketing Replacement Gasket Threshold Threshold Threshold Threshold 546A 547A 548A 555AA $ 15.80 $ 18.51 $ 23.78 $ 20.84 $ $ $ $ 51.82 60.73 78.01 68.37 Threshold Threshold Threshold Meeting Stile 555D $ 30.56 $ 100.29 Meeting Stile 555FS-AA $ 27.67 $ 90.79 Meeting Stile 555FS-D $ 33.78 $ 110.83 Meeting Stile 557AA $ 20.84 $ 68.37 Meeting Stile 557D $ 30.09 $ 98.75 Meeting Stile 557G $ 30.09 $ 98.75 Meeting Stile 557FS-AA $ 26.41 $ 86.66 Meeting Stile 557FS-D $ 36.04 $ 118.22 Meeting Stile 557FS-G $ 36.04 $ 118.22 Meeting Stile 560A $ 18.05 $ 59.23 Threshold 561A $ 19.32 $ 63.38 Threshold 563A $ 14.36 $ 47.10 Threshold 564A $ 10.45 $ 34.32 Threshold 564B $ 57.61 $ 188.99 Threshold 564D $ 20.92 $ 68.63 Threshold 565A $ 23.47 $ 77.01 Threshold 565B $ 136.82 $ 448.91 Threshold 566A $ 14.68 $ 48.16 Threshold 566B $ 60.25 $ 197.69 Threshold 568A $ 16.85 $ 55.26 Threshold 570AA 570S-BK $ $ 13.17 2.40 $ 43.22 $ 7.90 Gasketing Replacement Gasket 571AA 572N 600CP $ $ $ 13.17 4.10 4.77 $ 43.22 $ 13.45 /inch /ft. Meeting Stile Replacement Gasket Threshold 601CP $ 8.96 /inch /ft. Threshold 622A 622PVC 623A 624A 625A 626A 627A 628A 639WA $ $ $ $ $ $ $ $ $ 7.01 2.52 9.94 15.50 18.43 20.98 8.66 11.52 13.52 $ $ $ $ $ $ $ $ $ Threshold Replacement Gasket Threshold Threshold Threshold Threshold Threshold Threshold Door Sweep 22.98 8.27 32.60 50.86 60.47 68.84 28.41 37.80 44.35 PART NUMBER DESCRIPTION Aluminum Thermal BreakThreshold 6" (152.4) / Neoprene Clear Anodized / Solid Neoprene Dark Bronze Anodized / Solid Neoprene 1.56" Tall Sweep Seal - Neoprene Aluminum HandicapThreshold 4"(101.6) Aluminum HandicapThreshold 5"(127.0) Bronze HandicapThreshold 5"(127.0) Dark Bronze Anodized Handicap Threshold 5"(127.0) Aluminum HandicapThreshold 6"(152.4) Aluminum HandicapThreshold 7"(177.8) Aluminum HandicapThreshold 8"(203.2) Clear Anodized / Silicone InsertAdjustable Surface Astragal Dark Bronze Anodized / Silicone Insert Adjustable Surface Astragal Clear Anodized/ Silicone/ Intumescent Adjustable Surface Astragal Dark Bronze Anodized / Silicone Insert / Intumescent/ Adjustable Surface Astragal Clear Anodized / Silicone Insert /Adjustable Mortised Astragal Dark Bronze Anodized / Silicone Insert / Adjustable Mortised Astragal Gold Anodized / Silicone Insert /Adjustable Mortised Astragal Clear Anodized / Intumescent / Silicone Adjustable Mortised Astragal Dark Bronze Anodized / Intumescent /Silicone / Adjustable Mortised Astragal Gold Anodized / Intumescent / SiliconeAdjustable Mortised Astragal Aluminum RabbetedThreshold/ Neoprene 5"(127.0) wide 7/8"(22.2) high Aluminum RabbetedThreshold/ Neoprene 4 1/2"(114.3) wide 1" (25.4) high Aluminum RabbetedThreshold/ Neoprene 3 9/16"(90.4) wide 7/8"(22.2) high Aluminum RabbetedThreshold/ Neoprene 3 11/16"(84.9) wide 1/2"(12.7) high Bronze RabbetedThreshold / Neoprene 3 11/16"(84.9) wide 1/2"(12.7) high Dark Bronze Anodized / Neoprene 3 11/16"(84.9) wide 1/2"(12.7) high Aluminum RabbetedThreshold 4 7/8" (123.8) / Neoprene Stop 7/8" (22.2) Bronze RabbetedThreshold 4 7/8" (123.8) / Neoprene Stop 7/8" (22.2) Aluminum RabettedThreshold 5"(12.7) Neoprene Stop 1/2" (12.7) Bronze 1/2" (12.7) High Neoprene Stop 1/2" (12.7) Aluminum 1/2" (12.7) High RabbetedThreshold 6" (152.4) Wide Clear Anodized / Self-Adjusting /Silicone .328" Semi-circular Bulb Kerf Seal Silicone - Black Clear Anodized/ Self Adjusting/Neoprene Lip .36" Wide Lip and Bulb Seal - Neoprene Aluminum Cover Plate Wide max. 48"(1219.2) x 1/8"(3.2) thick Submit template with Order Aluminum Cover Plate Wide max. 48"(1219.2) x 1/8"(3.2) thick - Submit template with order Aluminum ButtThreshold 2" (50.8) .45' x .49" Thermal Break Connector - PVC Aluminum ButtThreshold 3" (76.2) Aluminum / Thermal Break / 4" (101.6) Aluminum / Thermal Break / 5" (127.0) Aluminum / Thermal Break / 6" (152.4) Aluminum / Neoprene / 2" (50.8) wide Aluminum / Neoprene / 3" (76.2) wide Aluminum / Solid Neoprene LIST PRICE LIST PRICE PER FOOT PER METER TYPE 639WD 639WN 643A 653A 654A 654B 655A 655B 656A 656B 657A 657B 663A 669DP-A DESCRIPTION $ 18.35 $ 60.19 $ 9.73 $ 31.96 $ 11.75 $ 38.54 $ 11.27 $ 37.00 $ 14.45 $ 47.41 $ 66.10 $ 216.87 $ 17.30 $ 56.76 $ 91.05 $ 298.73 $ 20.47 $ 67.17 $ 118.64 $ 389.26 $ 29.35 $ 96.28 $ 180.76 $ 593.07 $ 9.18 $ 30.12 Custom Product submit template to Eng. Specials Custom Product submit 669DP-S template to Eng. Specials 669DP-STST Custom Product submit template to Eng. Specials $ 8.57 $ 28.14 672A $ 54.57 $ 179.04 672B $ 12.49 $ 40.97 673A $ 65.44 $ 214.73 673B $ 16.92 $ 55.53 674A $ 91.65 $ 300.69 674B $ 20.15 $ 66.12 675A $ 24.37 $ 79.96 676A $ 178.76 $ 586.52 676B $ 33.70 $ 110.57 678A $ 20.84 $ 68.37 712AA Door Sweep Replacement Gasket Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold Dark Bronze Anodized / Solid Neoprene 4" Tall Lip Seal - Neoprene Aluminum / Carpet Divider / 3"(76.2) wide AluminumThreshold 3" (76.2) wide AluminumThreshold 4" (101.6) wide BronzeThreshold 4" (101.6) wide AluminumThreshold 5" (127.0) wide BronzeThreshold 5" (127.0) wide AluminumThreshold 6" (152.4) wide BronzeThreshold 6" (152.4) wide AluminumThreshold 7" (177.8) wide BronzeThreshold 7" (177.8) wide Aluminum Plate 3" (76.2) wide Aluminum Custom Fabricated Bulkhead Threshold Steel Custom Fabricated Bulkhead Threshold Stainless Steel Custom Fabricated Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold Gasketing 712D $ 30.56 $ 100.29 Gasketing 770D $ 34.23 $ 112.32 Gasketing 770EMI 770FS-AA $ 75.69 $ 40.91 $ 248.35 $ 134.22 Gasketing Gasketing 770FS-D $ 47.81 $ 156.89 Gasketing 770FS-G $ 47.81 $ 156.89 Gasketing 770SP $ 38.68 $ 126.89 Gasketing 770SPB 770STST 810 $ 36.04 $ 72.90 $ 2.71 each $ 239.18 $ 8.88 General Gasketing Weather Stripping 811 $ 4.05 $ 13.28 Weather Stripping 812 $ 4.71 $ 15.48 Weather Stripping 813 $ 5.73 $ 18.80 Weather Stripping 824N 826N 870AA 870D 870SPB 870S-BK 871AA 871D 873AA 905A 926N $ $ $ $ $ $ $ $ $ $ $ 1.27 1.05 17.08 25.54 34.40 5.41 17.08 25.54 17.08 7.88 1.75 $ 4.19 $ 3.44 $ 56.02 $ 83.79 each $ 17.76 $ 56.02 $ 83.79 $ 56.02 $ 25.87 $ 6.90 Weather Stripping Weather Stripping Gasketing Gasketing General Replacement Gasket Meeting Stile Meeting Stile Meeting Stile Gasketing Gasketing 951 971AA-BIO 972AA-BIO $ 11.52 $ 15.11 $ 12.82 $ 37.81 $ 49.57 $ 42.05 Finger Guard Finger Guard Finger Guard Aluminum Plate 2" (50.8) wide Bronze Plate 2" (50.8) wide Aluminum Plate 3" (76.2) wide Bronze Plate 3" (76.2) wide Aluminum Plate 4" (101.6) wide Bronze Plate 4" (101.6) wide Aluminum Plate 5" (127.0) wide Aluminum Plate 6" (152.4) wide Bronze Plate 6" (152.4) wide Aluminum Plate 8" (203.2) wide Clear Anodized / Adjustable /Spring Loaded / Silicone Insert Dark Bronze Anodized / Adjustable /Spring Loaded / Silicone Insert Dark Bronze Anodized / Adjustable Sound Seal/ Neoprene Irridate Finish Adjustable Head and Jamb Clear Anodized / Intumescent Fire Stop Neoprene Dark Bronze Anodized / Intumescent Fire Stop/Neoprene Gold Anodized / Intumescent Fire Stop / Neoprene Steel Primed Adjustable Sound Seal for Cased Opening Fire Rated Strike Plate Bracket Steel Prime. Stainless Steel Adjustable Sound Seal Closed Cell Neoprene/ Bumper Type/ PSA .625"(15.9) x .625"(15.9) Closed Cell Neoprene/ Bumper Type/ PSA .750"(19.1) x .625"(15.9) Closed Cell Neoprene/ Bumper Type/ PSA 1.00"(25.4) x .500"(12.7) Closed Cell Neoprene/ Bumper Type/ PSA 1.250"(31.8) x .625"(15.9) Neoprene Seal with PSA Closed Cell Neoprene Seal with PSA Clear Anodized / Silicone / Adjustable Dark Bronze Anodized / Silicone /Adjustable Strike Plate Bracket Steel Prime 6"(152) wide. .361" Wide Silicone Bulb Seal Clear Anodized / Pile Brush / Adjustable Dark Bronze Anodized / Pile Brush / Adjustable Clear Anodized / Neoprene Lip / Adjustable Aluminum Astragal .375"(9.5) x .185"(4.7) Closed Cell Sponge Neoprene w/PSA - 50 Ft.(15.24M)/Roll, 1 roll minimum UOM purchase Cover for mortise type hinge. BioWall Antibacterial rubber, white BioWall Antibacterial rubber, white Price Book 3 Effective August 12, 2017 • Rev. 08/17 13 PART NUMBER LIST PRICE LIST PRICE PER FOOT PER METER TYPE 973AA-BIO 974AA-BIO 1370A 1370D 1370N $ 17.79 $ 14.79 $ 10.04 $ 13.43 $ 2.37 $ $ $ $ $ 58.33 48.52 32.95 44.06 7.79 Finger Guard Finger Guard Gasketing Gasketing Replacement Gasket 1545A 1545B 1545D 1673A $ 7.74 $ 46.09 $ 24.20 $ 14.45 $ $ $ $ 25.41 151.22 79.40 47.41 Threshold Threshold Threshold Threshold 1674A $ 20.39 $ 66.90 Threshold 1674B $ 109.36 $ 358.82 Threshold 1675A $ 23.53 $ 77.23 Threshold 1682A 1682B 1684A 1685R 1686R 1840AA 1840D 2070A-10 2070A-20 2070A-24 2070A-30 2070A-36 2070A-42 2070N $ 7.21 $ 40.17 $ 16.09 $ 23.79 $ 23.79 $ 11.09 $ 15.01 $ 76.13 $ 137.03 $ 170.20 $ 209.53 $ 251.44 $ 285.12 $ 3.56 $ 23.69 $ 131.78 $ 52.79 $ 78.05 $ 78.05 $ 36.39 $ 49.25 $ 249.78 $ 449.61 $ 558.45 $ 687.49 $ 824.96 $ 935.45 $ 11.69 Threshold Threshold Threshold Threshold Threshold Meeting Stile Meeting Stile Flood Barrier Flood Barrier Flood Barrier Flood Barrier Flood Barrier Flood Barrier Replacement Gasket 2071A-10 2071A-20 2071A-24 2071A-30 2071A-36 2071A-42 2361AA $ 76.13 $ 137.03 $ 170.20 $ 209.53 $ 251.44 $ 285.12 $ 12.85 $ 249.78 $ 449.61 $ 558.45 $ 687.49 $ 824.96 $ 935.45 $ 42.18 Flood Barrier Flood Barrier Flood Barrier Flood Barrier Flood Barrier Flood Barrier Threshold 2673A $ 24.96 $ 81.90 Threshold 2673A-E $ 50.79 $ 166.63 Threshold 2673A-EL $ 66.49 $ 218.18 Threshold 2673B $ 102.57 $ 336.51 Threshold 2673B-E 2676A $ 131.01 $ 47.04 $ 429.86 $ 154.32 Threshold Threshold 2676A-E $ 99.71 $ 327.15 Threshold 2676A-EL $ 128.93 $ 423.04 Threshold 3056FS-AA $ 38.21 $ 125.39 Meeting Stile 3056FS-D $ 45.89 $ 150.57 Meeting Stile 3056FS-G $ 45.89 $ 150.57 Meeting Stile 3150N $ 2.16 $ 7.10 Replacement Gasket 3365EMI 3365N 3544 3546 $ $ $ $ 5.43 5.42 7.50 7.50 $ 17.82 $ 17.79 $ 24.60 $ 24.60 Replacement Gasket Replacement Gasket Door Sweep Door Sweep 3551 $ 55.52 $ 62.92 $ 77.13 each each each 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) DESCRIPTION BioWall Antibacterial rubber, white BioWall Antibacterial rubber, white Aluminum with Neoprene Dark Bronze Anodized / Neoprene .5" Wide-Five Finger Sponge Neoprene Extrusion Aluminum ButtThreshold 2 1/2" (63.5) Bronze ButtThreshold 2 1/2" (63.5) Dark Bronze AnodizedThreshold 2 1/2"(63.5) Aluminum ButtThreshold 3" (76.2) Wide x 1/2" (12.7) High AluminumThreshold One Side Beveled 4"(101.6) x 1/2"(12.7) High BronzeThreshold One Side Beveled 4"(101.6) x 1/2"(12.7) High AluminumThreshold One Side Beveled 5"(127.0) x 1/2"(12.7) High Carpet DividerThreshold 1 3/4" (44.5) Bronze Carpet Divider1 3/4"(44.5) x 1/2"(12.7) Aluminum Carpet Divider 4"(101.6) Rubber Carpet DividerThreshold 2.5"(63.5) Rubber Carpet DividerThreshold 1.813"(46.1) Clear Anodized Interior Astragal - Neoprene Dark Bronze Interior Astragal - Neoprene Flood Barrier Shield 10" high, inside mount Flood Barrier Shield 20" high, inside mount Flood Barrier Shield 24" high, inside mount Flood Barrier Shield 30" high, inside mount Flood Barrier Shield 36" high, inside mount Flood Barrier Shield 42" high, inside mount .25""X.625" Closed Cell Sponge Neoprene U Shape Extrusion Flood Barrier Shield 10" high, outside mount Flood Barrier Shield 20" high, outside mount Flood Barrier Shield 24" high, outside mount Flood Barrier Shield 30" high, outside mount Flood Barrier Shield 36" high, outside mount Flood Barrier Shield 42" high, outside mount Clear Anodized Ramp 3.94"(100.1) x .500"(12.7) Aluminum 3"(76.2) Traction Tread Nosing-Rubber Aluminum 3"(76.2) Traction Tread Nosing-Epoxy Aluminum 3"(76.2) Traction Tread Nosing - Epoxy / Photoluminescent insert Bronze 3"(76.2) Traction Tread Nosing - Rubber Bronze 3"(76.2) Traction Tread Nosing - Epoxy Aluminum 6"(152.4) Traction Tread Nosing-Rubber Aluminum 6"(152.4) Traction Tread Nosing-Epoxy Aluminum 6"(152.4) Traction Tread Nosing Epoxy / Photoluminescent insert Clear Anodized / Mortised Adjustable Astragal /Neoprene / Intumescent Fire Stop Dark Bronze Anodized / Mortised Adjustable /Neoprene / Intumescent Fire Stop Gold Anodized / Mortised Adjustable Astragal /Neoprene / Intumescent Fire Stop .27"X.071" Self Extinguishing T Shape Closed Cell Neoprene-Extrusion .735" Wide Bulb Seal - Conductive Neoprene 5/8" Wide Bottom Seal Aluminum / Mortised / Brush Aluminum / Mortised / Neoprene FLO option available Aluminum / Mortised Automatic Door Bottom Regular Duty Price Book 3 14 PART NUMBER LIST PRICE LIST PRICE PER FOOT PER METER TYPE 3552 3557FS-AA $ $ $ $ 58.72 66.54 81.57 38.21 each each each $ 125.39 3557FS-G $ 45.89 $ 150.57 3672A $ 15.13 $ 49.62 3672A-E $ 33.26 $ 109.12 3672A-EL $ 43.14 $ 141.52 3673A $ 22.42 $ 73.57 3673A-E $ 48.79 $ 160.08 3673A-EL $ 63.69 $ 208.97 3674A $ 30.00 $ 98.44 3674A-E $ 65.05 $ 213.44 3674A-EL $ 84.89 $ 278.54 3675A $ 36.71 $ 120.45 3675A-E $ 80.00 $ 262.49 3675A-EL $ 106.13 $ 348.21 3676A $ 44.23 $ 145.15 3676A-E $ 98.34 $ 322.65 3676A-EL $ 128.16 $ 420.49 3676N $ 2.94 $ 9.65 3708AA 3708N 3709AA 3831A 4000B $ $ $ $ $ 28.21 4.53 28.21 10.42 10.90 $ $ $ $ $ 92.55 14.85 92.55 34.17 35.77 4000Z 5000B 5000Z 5831AA 5831FS-AA 5831D 5831FS-D 5831G 5831FS-G 5831S-BK 5832AA 5832FS-AA $ $ $ $ $ $ $ $ $ $ $ $ 2.93 12.77 4.07 5.65 8.20 7.06 9.80 7.06 9.80 5.41 5.81 8.42 $ $ $ $ $ $ $ $ $ $ $ $ 9.62 41.90 13.35 18.53 26.89 23.16 32.14 23.16 32.14 17.76 19.06 27.63 5832D 5832FS-D $ $ 7.06 9.80 $ 23.16 $ 32.14 5832G 5832FS-G 5833AA 5833D 5833G 6570A 6575A 6710A 7000B 7332B 7334B 7335B 7336B $ $ $ $ $ $ $ $ $ $ $ $ $ 7.06 9.80 5.65 7.06 7.06 29.35 33.18 42.27 103.93 51.99 104.01 130.01 207.94 $ 23.16 $ 32.14 $ 18.53 $ 23.16 $ 23.16 $ 96.28 $ 108.85 $ 138.71 $ 340.99 $ 170.61 $ 341.25 $ 426.55 $ 682.27 Effective August 12, 2017 • Rev. 08/17 DESCRIPTION 18 1/8"-36" (460-914) Aluminum/ Mortised/ Regular Duty/ 36 1/8"-48" (917-1219) BrushAutomatic Door Bottom / Regular Duty 48 1/8"-54" (1222-1371) Meeting Stile Clear Anodized/ Mortised Adjustable Astragal/Silicone / Intumescent Fire Stop Meeting Stile Gold Anodized / Mortised Adjustable Astragal /Silicone / Intumescent Fire Stop Threshold Aluminum 2"(50.8) Traction Tread Plate/ Rubber Threshold Aluminum 2"(50.8) Traction Tread Plate/ Epoxy Threshold Aluminum 2"(50.8) Traction Tread Plate / Epoxy/ Photoluminescent Tread insert Threshold Aluminum 3"(76.2) Traction Tread Plate / Rubber insert Threshold Aluminum 3"(76.2) Traction Tread Plate / Epoxy insert Threshold Aluminum 3"(76.2) Traction Tread Plate /Epoxy / Photoluminescent Tread insert Threshold Aluminum 4"(101.6) Traction Tread Plate / Rubber insert Threshold Aluminum 4"(101.6) Traction Tread Plate /Epoxy insert Threshold Aluminum 4"(101.6) Traction Tread Plate /Epoxy / Photoluminescent Tread insert Threshold Aluminum 5"(127.0) Traction Tread Plate / Rubber insert Threshold Aluminum 5"(127.0) Traction Tread Plate /Epoxy insert Threshold Aluminum 5"(127.0) Traction Tread Plate /Epoxy / Photoluminescent Tread insert Threshold Aluminum 6"(152.4) Traction Tread Plate/Rubber / Photoluminescent Tread insert Threshold Aluminum 6"(152.4) Traction Tread Plate /Epoxy Insert Threshold Aluminum 6"(152.4) Traction Tread Plate/Epoxy / Photoluminescent Tread insert Replacement Gasket .24"X.175" Tread Rubber for AluminumThresholds - Extrusion Gasketing Clear Anodized / Magnet / Sound Trap Gasketing Closed Cell Neoprene, Black 1"(25.4) x 4"(10.2) Gasketing Clear Anodized / Neoprene / Sound Trap Gasketing Aluminum / Double Neoprene Weather Stripping Bronze Side Jamb without Return Flange 1 3/4" Weather Stripping Zinc Side Jamb without Return Flange 1 3/4" Weather Stripping Bronze Side Jamb without Return Flange Weather Stripping Zinc Side Jamb without Return Flange Gasketing Clear Anodized / Silicone / PSA Gasketing Clear Anodized / Silicone / Intumescent / PSA Gasketing Dark Bronze Anodized / Silicone / PSA Gasketing Dark Bronze Anod./ Silicone Intumet/ PSA Gasketing Gold Anodized / Silicone / PSA Gasketing Gold Anodized / Silicone / Intumescent / PSA Replacement Gasket .36" Wide Lip and Bulb Seal - Silicone - Black Gasketing Clear Anodized / Brush / PSA Gasketing Clear Anodized / Poly Brush / Intumescent / PSA Gasketing Dark Bonze Anodized / Poly Brush / PSA Gasketing Dark Bronze Anod./ Poly Brush/ Intumescent/ PSA Gasketing Gold Anodized / Poly Brush / PSA Gasketing Gold Anodized / Poly Brush / Intumescent Gasketing Clear Anodized / Silicone / PSA Gasketing Dark Bronze Anodized / Silicone / PSA Gasketing Gold Anodized / Silicone / PSA Threshold Aluminum Handicap 7"(177.8) x .500"(12.7) Threshold AluminumThreshold 7.5" (190.5) Threshold Aluminum Plate 10" (254.0) Threshold Brass / Adj. Interlocking w/ #7336 or 7337 Threshold Brass / Interlocking - Extension Leg Threshold Brass / Adjustable Interlocking 4" (101.6) Threshold Brass / Adjustable Interlocking 5"(127) Threshold Brass / Adjustable interlocking 6.2" (157.5) PART NUMBER LIST PRICE LIST PRICE PER FOOT PER METER TYPE 7337B 7350A 7770AA 7770D 7770G 7770N 8004N 8042S-BK 8043N 8047R 8048S-BK 8052N 8053Q-BR 8053Q-WH 8054S-BK 8054S-WH 8055S-BK 8056S-WH 8136 8136P-GY 8137 8138 8144S-BK 8144S-WH 8144FS 8145S-BK 8149AA 8150S-BK 8151AA 8172N $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ 233.94 71.81 54.28 57.83 72.25 90.39 28.14 35.94 35.94 2.80 2.07 1.67 2.35 4.33 2.00 2.00 2.13 2.13 2.67 2.67 3.15 3.15 7.54 1.98 7.66 8.78 2.87 2.87 3.89 1.82 6.34 2.13 6.55 1.07 8191AA 8191D 8191G 8192AA 8192AA-PSA 8192D 8192D-PSA 8192P 8193AA 8193AA-PSA 8193D 8193D-PSA 8193P 8194AA 8194AA-PSA 8194D 8194D-PSA 8194N 8195AA 8195AA-PSA 8197AA 8197D 8197G 8197N 8198AA 8198D 8198G 8198P 8216S-BK 8217S-BK 8302AA 8302D 8302N 8303AA 8303D $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ 6.29 8.63 8.63 4.85 6.27 6.70 7.29 4.06 4.56 5.99 5.63 7.12 3.13 4.56 5.99 5.63 7.12 2.47 5.65 7.41 6.06 8.31 8.31 4.11 6.29 8.63 8.63 4.47 1.49 1.49 3.10 4.98 2.11 3.10 4.98 $ 767.58 each each each each each $ 92.32 $ 117.90 $ 117.90 $ 9.21 $ 6.78 $ 5.46 $ 7.69 $ 14.20 $ 6.59 $ 6.59 $ 6.98 $ 6.98 $ 8.74 $ 8.74 $ 10.35 $ 10.35 $ 24.72 $ 6.52 $ 25.12 $ 28.83 $ 9.41 $ 9.41 $ 12.75 $ 5.99 $ 20.79 $ 7.00 $ 21.80 $ 3.50 Threshold 12"-18" (305-457) 18 1/8"-36" (460-914) 36 1/8"-48" (917-1219) 48 1/8"-54" (1222-1371) 54 1/8"-60" (1375-1524) Gasketing Gasketing Gasketing Replacement Gasket Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Meeting Stile Replacement Gasket Meeting Stile Meeting Stile Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Door Sweep Replacement Gasket $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ Gasketing Gasketing Gasketing Door Sweep Meeting Stile Door Sweep Meeting Stile Door Sweep Door Sweep Meeting Stile Door Sweep Meeting Stile Replacement Gasket Door Sweep Meeting Stile Door Sweep Meeting Stile Replacement Gasket Meeting Stile Meeting Stile Door Sweep Door Sweep Door Sweep Replacement Gasket Door Sweep Door Sweep Door Sweep Replacement Gasket Weather Stripping Meeting Stile Gasketing Gasketing Replacement Gasket Gasketing Gasketing 20.66 28.31 28.31 15.90 20.57 21.98 23.91 13.33 14.97 19.64 18.46 23.34 10.28 14.97 19.64 18.46 23.34 8.11 18.53 24.30 19.89 27.27 27.27 13.48 20.66 28.31 28.31 14.69 4.68 4.68 10.18 16.35 6.93 10.18 16.35 DESCRIPTION Brass / Adjustable interlocking 7.2" (182.9) Aluminum / Mortised Automatic Door Bottom for Sliding Doors Clear Anodized, Adjustable Sound Seal Dark Bronze Anod., Adjustable Sound Seal Gold Anodized, Adjustable Sound Seal .32" Wide Elongated Bulb Seal - Neoprene Neoprene Kerf Seal Silicone Kerf Seal / Black / PSA Neoprene Kerf Seal / Black Rubber Seal for overhead door Silicone Kerf Seal / Black Kerf Sponge Seal Kerf Foam Seal, Brown Kerf Foam Seal, White Kerf Pressure Seal, Silicone Black ø .250" Kerf Pressure Seal, Silicone White ø .250" Kerf Pressure Seal, Silicone Black ø .375" Kerf Pressure Seal, Silicone White ø .438" Polycarbornate Seal / Brush .394"(10) .188" x .250 Woven Pile with Fin - Gray Polycarbornate Seal / Brush .472"(12) Polycarbornate Seal / Brush .590"(15) Silicone / Batwing Type / Black / PSA Silicone / Batwing Type / White / PSA Intumescent Batwing Type Seal / PSA Silicone / Black / PSA Clear Anodized / Brush / Mortised Silicone, black, PSA Aluminum / Neoprene Neoprene/ PSA .250"(6.4) x .125"(3.2) Minimum order 75'(22.8M) Roll UOM Clear Anodized / Neoprene Dark Bronze Anodized / Neoprene Gold Anodized / Neoprene Clear Anodized / .625" long Brush Clear Anodized / Brush / Adhesive Dark Bronze Anodized / .625" long Brush Dark Bronze Anodized / Brush / Adhesive Replacement Pile only, for #8192 & 8198 Clear Anodized / .375" long Brush Clear Anodized / .375" Brush / Adhesive Dark Bronze Anodized / .375" long Brush Dark Bronze Anod./ .375" Brush / Adhesive Replacement Pile Brush for 8193 Clear Anodized / Neoprene Lip Clear Anodized / Neoprene Lip/ Adhesive Dark Bronze Anodized / Neoprene Lip Dark Bronze Anod./ Neoprene Lip/ Adhesive .53" Long Lip Seal - EPDM Clear Anodized / Neoprene Lip Clear Anodized / Neoprene Lip / Adhesive Clear Anodized Drip Cap / Neoprene Dark Bronze Anodized Drip Cap / Neoprene Gold Anodized Drip Cap / Neoprene 1.063" Tapered Lip Seal - EPDM Clear Anodized Drip Cap / Brush Seal Dark Bronze Anodized Drip Cap / Brush Gold AnodizedRain Drip / Brush .625" Nylon Brush Pressure seal, silicone, black, PSA Silicone lips, black, PSA Clear Anodized & Neoprene Seal Dark Bronze Anodized & Neoprene Seal 45 Degree LEG Seal - Neoprene Clear Anodized & Neoprene Seal Dark Bronze Anodized & Neoprene Seal PART NUMBER LIST PRICE LIST PRICE PER FOOT PER METER TYPE 8303S-BK 8305AA 8305D 8306AA 8306D 8353N 8361Key 8452A 8452N 8557S-BK 8655A 8724A 8726A 8729A $ 1.50 $ 4.06 $ 6.51 $ 4.06 $ 6.51 $ 3.51 $ 3.45 $ 15.42 $ 6.74 $ 3.92 $ 11.27 $ 24.56 $ 29.71 $ 33.11 $ 4.94 $ 13.31 $ 21.38 $ 13.31 $ 21.38 $ 11.52 each $ 50.58 $ 22.13 $ 12.86 $ 37.00 $ 80.58 $ 97.47 $ 108.63 Replacement Gasket Gasketing Gasketing Gasketing Gasketing Replacement Gasket General Threshold Replacement Gasket Replacement Gasket Threshold Threshold Threshold Threshold 8770N $ 2.37 $ 7.79 Replacement Gasket 8780N $ 2.44 $ 8.02 Replacement Gasket 8800S-BK 8800S-WH 8810S-BK 8810S-WH 8841R 8877AA 8878AA 8878BIO-BR 8878N-BK 8879AA 8879AA-PSA 8880AA 8880D 9131-PSA 9137-PSA 9137S-CL 9495Tape $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ 2.73 2.73 2.35 2.35 2.00 5.88 5.65 2.37 1.12 6.36 7.15 11.33 13.61 4.65 11.62 4.52 0.16 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ 8.97 8.97 7.69 7.69 6.59 19.28 18.53 7.79 3.69 20.86 23.45 37.16 44.63 15.27 38.12 14.83 0.51 Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Replacement Gasket Replacement Gasket Gasketing Meeting Stile Gasketing Gasketing Weathe Stripping Weather Stripping Replacement Gasket General 2250375PSA $ 3.42 30622000PSA $ 4.15 3125375PSA $ 1.94 3125500PSA $ 2.61 3125625PSA $ 3.15 31252000PSA $ 6.23 3250375PSA $ 3.42 3250500PSA $ 4.15 3250750PSA $ 5.50 32501000PSA $ 6.83 32502000PSA $ 10.25 4062375PSA $ 1.41 4062500PSA $ 1.49 4062750PSA $ 1.94 40621000PSA $ 2.61 42501000PSA $ 6.83 42502000PSA $ 10.25 $ 3.74 PAN-Z STC3003X062 $ 4.34 STC3003X125 $ 5.78 STC3003X250 $ 10.13 STC3003X375 $ 14.47 $ 12.42 Z49 $ 12.42 Z49AA $ 205.52 Z950 $ 11.24 $ 13.61 $ 6.35 $ 8.54 $ 10.33 $ 20.42 $ 11.24 $ 13.61 $ 18.04 $ 22.39 $ 33.62 $ 4.62 $ 4.89 $ 6.35 $ 8.54 $ 22.39 $ 33.62 $ 11.82 / sqft. / sqft. / sqft. / sqft. /set (2) /set (2) each Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent General Intumescent Intumescent Intumescent Intumescent General General Cam Lift Hinge Z953 $ 133.62 each Cam Lift Hinge Z955 $ 109.62 each Cam Lift Hinge Z9500 $ 228.49 each Cam Lift Hinge DESCRIPTION 1/4" Bulb Seal-Silicone Clear Anodized with Brush Dark Bronze Anodized with Brush Clear Anodized with Neoprene Dark Bronze Anodized with Neoprene .469" Wide Open Bulb Seal-Neoprene Locking Key for Automatic Door Bottom Wheel Chair ShowerThreshold 2" WideThreshold Seal-EPDM Rubber Silicone Double Lip Seal W/ Compressive Bulb Aluminum HandicapThreshold 5"(127) Aluminum 5 5/8"(142.9). Thermal Break Aluminum 7 5/8"(193.7). Thermal Break Aluminum 6 5/8"(168.3). Thermal Break/Neoprene. Neoprene / PSA .500"(12.7) x .125"(3.2) , minimum order 75Ft.(22.8M), order in UOM Neoprene / PSA 1"(25.4) x .094"(2.4), minimum order 75Ft.(22.8M), order in UOM Silicone Black Kerf Seal Silicone White Kerf Seal SIlicone Black Kerf Seal Silicone White Kerf Seal Kerf Seal rubber, black Clear Anodized / Neoprene Seal Clear Anodized / Silicone Seal .36" Wide Snap-on Cover-Silicone-BIO .36" Wide Snap-on Cover - EPDM Rubber Clear Anodized / Brush Seal Clear Anodized / Brush Seal / Adhesive Clear Anodized frame, acoustical Dark Bronze Anodized frame, acoustical PVC Bumper, PSA, .750"x.188" PVC/Neoprene for Sliding Glass Doors .906" Tall Silicone Lip Seal 3M Double-coated Clear Tape - .250" wide 540' (164.6M) Roll Minimum Order and UOM FS2002 Intumet 1/4"(6.4) x 3/8"(9.5) FS3003 Intumet 1/16" (1.6) x 2" (50.8) FS3003 Intumet 1/8" (3.2) x 3/8" (9.5) FS3003 Intumet 1/8" (3.2) x 1/2" (12.7) FS3003 Intumet 1/8" (3.2) x 5/8" (15.9) FS3003 Intumet 1/8" (3.2) x 2" (50.8) FS3003 Intumet 1/4" (6.4) x 3/8" (9.5) FS3003 Intumet 1/4"(6.4) x 1/2" (12.7) FS3003 Intumet 1/4" (6.4) x 3/4" (19.1) FS3003 Intumet 1/4" (6.4) x 1" (25.4) FS3003 Intumet 1/4" (6.4) x 2" (50.8) FS4004 Intumet 1/16" (1.6) x 3/8" (9.5) FS4004 Intumet 1/16"(1.6) x 1/2"(12.7) FS4004 Intumet 1/16"(1.6) x 3/4"(19.1) FS4004 Intumet 1/16" (1.6) x 1" (25.4) FS4004 Intumet 1/4" (6.4) x 1" (25.4) FS4004 Intumet 1/4" (6.4) x 2" (50.8) Optional Zinc Pan forThreshold 175 Sound Sheet 12"(304.8)x 1/16"(1.6). 19 STC Sound Sheet 12"(304.8)x 1/8"(3.2). 24 STC Sound Sheet 12"(304.8)x 1/4"(6.4) Sound Sheet 12"(304.8)x 3/8"(9.5) Steel Holding Plates for Auto. Door Bottom Aluminum Holding Plates for Auto. Dr. Bottom Stainless Steel Cam Lift - Handed (32D)5"(127) x 4.5"(114.3) x .250"(6.4) Stainless Steel Cam Lift- Handed - (32D) 5"(127) x 4.5"(114.3) x .180"(4.6) Stainless Steel Cam Lift - Handed - (32D) 4.5"(114.3) x 4.5"(114.3) x .134"(3.4) Stainless Steel Cam Lift - Handed (32D) 5"(127) x 4.5"(114.3) x .250"(6.4) Price Book 3 Effective August 12, 2017 • Rev. 08/17 15 OPTIONAL EXTRAS STANDARD SCREWS DRIVE SCREWS APPLICATIONS: For Head and Jamb #6 x 3/4" Pan Phillips Head Self-drilling Zinc Plated LIST PRICE $ 0.18 /ea. #7201BK #6 x 3/4" Pan Phillips Head Self-drilling Black Oxide $ 0.21 /ea. #7201Z #4 #4 NAILS For Threshold LIST PRICE $ 0.16 /ea. $ 0.29 /ea. #16 7/8" (22.2) Zinc Plated Flathead Steel Nail #16 7/8"(22.2) Copper Plated Flathead Nail $ 33.18 /lb. $ 33.18 /lb. (Note: 1 lb. contains ~1300 pcs. Minimum order 1lb. ) #10 x 1-1/4" Flat Phillips Head Sheet Metal Screw Zinc Plated LIST PRICE $ 0.48 /ea. #7203BK #10 x 1-1/4" Flat Phillips Head Sheet Metal Screw Black Oxide $ 0.55 /ea. #7203Z 5/16" (7.9) Waferhead Plated 5/16" (7.9) Waferhead Stainless Steel SECURITY SCREWS Torx Screws are available upon request. CALL for price For Threshold LIST PRICE $ 0.51 /ea. #7233Z #10 x 1-1/4" Flat Phillips Head Wood Screw Zinc Plated #7233B #10 x 1-1/4" Flat Phillips Head Wood Screw Brass Material #7241Z #12 x 11/16" Flat Undercut Phillips Head Self-drilling Zinc Plated #7244Z 1/4-20 x 1" #7245Z 1/4-20 x 1-1/2" Flat Head Sleeve Bolt Flat Phillips Head $ 0.91 /ea. LIST PRICE $ 0.61 /ea. LIST PRICE $ 2.37 /ea. Machine Screw Zinc Plated Zinc Plated $ 2.56 /ea. For Astragals #10 x 3/4" Pan Phillips Head Self-drilling Zinc Plated LIST PRICE $ 0.69 /ea. #7249BK #10 x 3/4" Pan Phillips Head Self-drilling Black Oxide $ 0.75 /ea. #7249Z For Hinges (#Z950 type) LIST PRICE #7250ST #12-24 x 3/4" Flat Phillips Head, Type F Machine Screw Stainless Steel $ 1.03 /ea. For Hinges (#Z955 type) #7255ST #12-24 x 3/4" Flat Phillips Head, Type F Machine Screw Stainless Steel LIST PRICE $ 1.03 /ea. EXPANSION SHIELD / ANCHORS #221 - Plastic Shield with #10 x 1-1/4" (or 1-1/2", 1-3/4") Flat Phillips SMS LIST PRICE $ 0.66 /ea. #222 - Lead Shield with #10 x 1-1/4" (or 1-1/2", 1-3/4") Flat Phillips SMS LIST PRICE $ 0.67 /ea. #223 - MSLA-10 Anchor with #10-24 x 1-1/2" Flat Phillips Machine Screw LIST PRICE $ 1.56 /ea. #224 - MSLA-4 Anchor with #1-4-20 x 1-1/2" Flat Phillips Machine Screw LIST PRICE $ 1.56 /ea. MEMBER #226 Stainless Steel Sleeve Anchor MEMBER LIST PRICE $ 4.74 /ea. www.zerointernational.com Price Book 3 16 Effective August 12, 2017 • Rev. 08/17 Zero International - Custom Bulkhead Template Company Name:________________________________________________________________________________________________________________________________________ Contact:_________________________________________________________________________________________________________________________________________________ Phone:___________________________________________________________________________________________________________________________________________________ Email:____________________________________________________________________________________________________________________________________________________ Purchase Order #:_______________________________________________________________________________________________________________________________________ Email to: Zero Customer.Support@Allegion.com or Fax to: (800)851-0000 K Please complete Qty. H No jamb cut out. Product Desc. 669A Aluminum 669S Steel 669STST Stainless Qty. Please complete dimensions in inches or mm. Must complete A-E, F-K optional if required. Dimension A F E B C D Can only be 1" greater than A E F Jamb Cut Outs G Rectangular - No jamb cut outs minimum dimension 1" No jamb cut out. C H K B D G A Inches " MM About Allegion Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security. As a$2 billion provider of security solutions for homes and businesses, Allegion employs more than 7,800 people and sells products in more than 120 countries across the world. Allegion comprises 23 global brands, including strategic brands CISA®, Interflex®, LCN®, Schlage® and Von Duprin®. For more, visit www.allegion.com © 2017 Allegion 010962, Rev. 08/17 allegion.com/us
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2016:08:24 15:23:22-05:00 Creator : Adobe InDesign CS6 (Macintosh) Modify Date : 2017:07:13 15:54:53-05:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Metadata Date : 2017:07:13 15:54:53-05:00 Creator Tool : Adobe InDesign CS6 (Macintosh) Instance ID : uuid:50211ac4-8883-ab48-9a28-0b8f6567f766 Original Document ID : xmp.did:3AE2B76713206811822A9AC81F4D062B Document ID : xmp.id:F6DD03FC492068118A6DFAAD72C538C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:F5DD03FC492068118A6DFAAD72C538C8 Derived From Document ID : xmp.did:9552354EBF206811871FF5DAEBBEFB23 Derived From Original Document ID: xmp.did:3AE2B76713206811822A9AC81F4D062B Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Macintosh) History Changed : / History When : 2016:08:24 15:23:23-05:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 18EXIF Metadata provided by EXIF.tools