Zero Price Book 2017

User Manual: Zero Zero Price Book Price Book

Open the PDF directly: View PDF PDF.
Page Count: 18

Effective August 12, 2017 • Rev 8/17
Price book 3
Price Book 3
Effective August 12, 2017 • Rev. 08/17
2
This price list supersedes and cancels all previous price lists. Prices shown are subject to change without notice.
Administrative Offices
Allegion Administrative Office
11819 N. Pennsylvania St.
Carmel, IN 46032
allegion.com/us
Customer Care
Our Customer Care Representatives are available for questions or assistance.
You can reach the Zero International customer care team at 800-635-5335.
You can contact Allegion customer care at 877-671-7011 (Press 1 for Sales Support | Press 2 for Product Support | Press 3 for SSC) or through
the email addresses listed below:
Placing orders
You can place orders with Allegion via the fax numbers or emails listed below:
Zero International
Fax#: 1-800-851-0000
Email: Zero.Orders@allegion.com
Sales Support
Carolinas
(North Carolina, South Carolina, Virginia)
Carolinas_Sales_Support@allegion.com
Central
(Arkansas, Illinois, Iowa, Kansas, Missouri,
Nebraska, Oklahoma)
Central_Sales_Support@allegion.com
Chicago
(Illinois-Northern, Wisconsin)
Chicago_Sales_Support@allegion.com
Florida
Florida_Sales_Support@allegion.com
Great Lakes
(New York, Pennsylvania)
Great_Lakes_Sales_Support@allegion.com
Metro New York
Metro_New_York_Sales_Support@allegion.com
Request for Quote
Carolinas
(North Carolina, South Carolina, Virginia)
Carolinas.Quotes@allegion.com
Central
(Arkansas, Illinois, Iowa, Kansas, Missouri,
Nebraska, Oklahoma)
Central.Quotes@allegion.com
Chicago
(Illinois-Northern, Wisconsin)
Chicago.Quotes@allegion.com
Florida
Florida.Quotes@allegion.com
Great Lakes
(New York, Pennsylvania)
GreatLakes.Quotes@allegion.com
Metro New York
Metro.Quotes@allegion.com
Technical Product Support
Mechanical Locks/Keying Systems
Mechanical_Locks_TechProdSupport@allegion.com
Michigan
Michigan_Sales_Support@allegion.com
Mid Atlantic
(Delaware, Maryland, New Jersey)
Mid_Atlantic_Sales_Support@allegion.com
Midwest
(Indiana, Kentucky, Ohio, West Virginia)
Midwest_Sales_Support@allegion.com
Mountain States
(Colorado, Idaho, Montana, Nevada, Utah, Wyoming)
Mountain_States_Sales_Support@allegion.com
New England
(Connecticut, Main, Massachusetts, New Hampshire,
Rhode Island, Vermont)
New_England_Sales_Support@allegion.com
North Central
(Minnesota, North Dakota, South Dakota)
North_Central_Sales_Support@allegion.com
Michigan
Michigan.Quotes@allegion.com
Mid Atlantic
(Delaware, Maryland, New Jersey)
MidAtlantic.Quotes@allegion.com
Midwest
(Indiana, Kentucky, Ohio, West Virginia)
Midwest.Quotes@allegion.com
Mountain States
(Colorado, Idaho, Montana, Nevada, Utah, Wyoming)
Mtn.States.Quotes@allegion.com
New England
(Connecticut, Main, Massachusetts, New Hampshire,
Rhode Island, Vermont)
NewEngland.Quotes@allegion.com
North Central
(Minnesota, North Dakota, South Dakota)
NorthCentral.Quotes@allegion.com
Northern California
Northern_California_Sales_Support@allegion.com
Northwest
(Alaska, Oregon, Washington)
Northwest_Sales_Support@allegion.com
South
(Alabama, Georgia, Louisiana,
Mississippi, Tennessee)
South_Sales_Support@allegion.com
Southern California
(California-Southern, Hawaii)
Southern_California_Sales_Support@allegion.com
Southwest
(Arizona, New Mexico)
Southwest_Sales_Support@allegion.com
Texas
Texas_Sales_Support@allegion.com
Northern California
NoCal.Quotes@allegion.com
Northwest
(Alaska, Oregon, Washington)
Northwest.Quotes@allegion.com
South
(Alabama, Georgia, Louisiana,
Mississippi, Tennessee)
South.Quotes@allegion.com
Southern California
(California-Southern, Hawaii)
SoCal.Quotes@allegion.com
Southwest
(Arizona, New Mexico)
Southwest.Quotes@allegion.com
Texas
Texas.Quotes@allegion.com
Mechanical Locks & Key Systems
Fax#: 1-800-452-0665
Email: Order_Entry_Schlage_Commercial@allegion.com
FastTrack
Fax#: 1-800-288-4242
Email: Order_Fasttrack@allegion.com
3
Price Book 3
Effective August 12, 2017 • Rev. 08/17
www.zerointernational.com
For latest additions, corrections, revisions,
visit www.zerointernational.com
“When Nothing Else Is Good Enough For Long Enough"
MINIMUM CHARGE:
TERMS:
All claims for shortage or improper lling of order should be made within 10 days of receipt.
No returns accepted without prior authorization. Returns should be made within 30 days of
authorization, freight prepaid, 45% restocking and handling charge will apply. Returns made after
30 days from date of delivery will receive a credit to their account to be applied to future orders.
Nonstandard and specialty fabricated items are not returnable.
RETURNS:
$50.00 Net. Surcharge may apply. Material charged to next stock size.
20% If order is fabricated and packed.
CANCELLATION CHARGE:
Payable in U.S. Currency.
Without open credit – Bank check, American Express, Master Card , Visa and Discover.
Material charged to next stock size.
All prices are F.O.B. factory.
CLAIMS:
The following is made in lieu of all warranties, express or implied, including warranties or
merchantibility and tness for a particular purpose: Purchase or use of this product constitutes an
agreement with Seller and Manufacturer that, if this product proves to be defective or in
any way unsuitable, Seller’s and Manufacturer’s limit of liability for all damages, including but not
limited to incidental or consequential damages, and User’s or Purchaser’s exclusive
remedy, regardless of legal theory, including theories of breach of warranty, negligence and strict
liability, shall be to receive, at Seller’s or Manufacturer’s option, repair of the defective product, an
equivalent quantity of replacement product or a refund of the purchase price.
WARRANTY:
GUARANTEE:
Three years against defects in material or workmanship. Defective material will be replaced, howev-
er, no back charges for damage incurred or work done thereon will be allowed.
ZERO INTERNATIONAL
Main Office And Manufacturing
2720 Tobey Drive, Indianapolis, IN 46219
Phone: 877-671-7011
Fax: 800-851-0000
E-mail: Zero.Customer.Support@allegion.com
Since 1923
Supersedes all previous lists.
Subject to change without notice.
4
Price Book 3
Effective August 12, 2017 • Rev. 08/17
TERMS & CONDITIONS
1. GENERAL/ACCEPTANCE. (a) This Agreement contains the only terms and conditions
by which Company will quote and sell Deliverables to Customer; (b) The terms “purchase
order” or “order” for the purposes of this Agreement include the term “request for quotation,”
as appropriate; (c) This Agreement supersedes all pre-printed or boilerplate terms and
conditions set forth in any purchase order issued by Customer; (d) No reference herein to
Customer’s purchase order will in any way incorporate different or additional terms and
conditions, all of which Company hereby expressly objects to; (e) ANY ACCEPTANCE BY
COMPANY OF CUSTOMER’S PURCHASE ORDER IS EXPRESSLY CONDITIONED ON
THE CUSTOMER’S ASSENT TO AND ACCEPTANCE OF THE TERMS AND CONDITIONS
CONTAINED IN THIS AGREEMENT; (f) Company reserves the right to decline any order, in
whole or in part, for any reason.
2. ORDERS.
a. Order Processing. When Customer wishes to place an order for Deliverables, it will
deliver to Company a purchase order. All such purchase orders must (i) be in a written format
acceptable to Company, (ii) be legible, (iii) include a purchase order number, (iv) include
Customer’s account number, invoice address, ship to address, shipping method, shipper’s
letter of instruction for international shipments, part number, pricing, and designated contact
information, (v) include, if applicable, any special configuration ID numbers, necessary
programming information, special factory instructions, and requested specifications regarding
a particular finish, handing, design, backset, or strike, (vi) reference any applicable pricing
discounts under an ongoing buying program or based on a written quote from Company,
along with the applicable buying program number or quotation number, and (vii) not combine
buying program and quoted product on the same order.
b. Minimum Orders. In the event the order value does not meet any required minimum
net Deliverable value, Company may, at its sole discretion, (i) increase the quantity of items
in the order to meet the minimum net Deliverable value requirement; (ii) apply a minimum
order charge; (iii) reject the order, or (iv) waive the requirement, provided that the waiver of
a requirement for one order shall not constitute a waiver of the requirement for any future
orders.
c. Acceptance of Purchase Orders. Company will endeavor to (i) acknowledge receipt
of each purchase order issued in accordance with this Agreement, and (ii) notify Customer
whether Company accepts or rejects the purchase order. If Company fails to accept or reject
a purchase order within a reasonable time period, such failure to respond will be deemed a
rejection of the entire order.
Orders that combine buying program and quoted product on the
same order will be routed back to your local SSC office in order to review subject purchase order.
d. Changes to Order/ Cancellation of Orders. Additional terms and conditions regarding
order changes and cancellations are available on the Allegion customer website, WHICH
TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. Unless otherwise
provided herein, Customer acknowledges that (i) requesting a Change Order may cause
a delay in the scheduled shipment date, a longer lead time or result in a new scheduled
shipment date; (ii) Orders may not be changed after 48 hours of Company’s order
acknowledgment; (iii) After 48 hours of Company’s order acknowledgment, all changes
to an accepted purchase order will be subject to a Change Order charge of 25% of the net
Deliverable value, plus the cost of labor and fabrication or raw material that Company
incurred prior to the receipt of the Change Order from Customer, or that may be required due
to the Change Order; (iv) the requested change may result in additional charges for labor,
fabrication, and raw material, and (v) if Customer cancels an order or portion of an order
that includes Deliverables that have been manufactured and prepped for shipping, a 45%
restocking fee will apply. Notwithstanding the foregoing, Customer cannot change or cancel
credential orders, reader orders, biometrics orders or any non-cataloged, special, Custom or
nonstandard items once they have been placed. All cancelled orders for a Non Recurring
Expense (NRE), credential orders, reader orders, biometrics orders, and/or Custom orders will
be subject to a cancellation charge of 100% of the acknowledged price.
e. Add-ons. Add-on orders will not be accepted. Additions to orders will be entered as
separate stand-alone orders and must qualify for all terms of sale, including discounts, on an
individual basis.
f. Fast-Track Orders. No changes or cancellations will be accepted on the 24-Hour
Fast Track Program. For 3-day Fast Track orders, changes and cancellations may only be
requested by Customer within 24 hours of Company’s order acknowledgment if the order has
not shipped. For 5-Day Fast Track orders, changes and cancellations may only be requested
by Customer if the order has not shipped and if the request is made to Company within
48 hours of Company’s order acknowledgment. Return Material Authorization (RMA) for
Deliverables must be processed through Fast Track Customer Service.
g. Steelcraft Orders. For all Steelcraft orders, changes or cancellations are allowed without
penalty only if made within 48 hours of Company’s order acknowledgment, and provided that
the order has not shipped. Some exceptions do apply – please consult the factory. Changes
are not allowed on Rapid Program orders after the order has been entered and acknowledged.
After 48 hours of Company’s order acknowledgment, all changes or cancellations are subject
to a charge of 25% of the order. Unless otherwise specified by Company in writing, any
changes to orders acknowledged by Company that affect the delivery date will be deemed
a new order and will require acknowledgement by Company as provided in this Section.
Additional products, features, terms and conditions regarding the Rapid Program are available
on the Allegion customer website, WHICH TERMS ARE EXPRESSLY INCORPORATED
HEREIN BY REFERENCE.
3. PRICES, INVOICES AND PAYMENT.
a. Prices. The prices in Company’s Price Book are subject to change at any time, without
notice to Customer. Company may charge Customer additional amounts if Customer requests
special packing, marking, shipment, product modification, or engineering services. Oral prices
specified by Company are null and void. Quote numbers must be referenced on Customer’s
purchase order in order for the Company’s quoted pricing to apply. Orders that do not
reference a quote number will receive buy program pricing or book net pricing. Quoted prices
are for those specific products quoted for a specified job, and are subject to the Price Book in
effect at the time Company receives the order.
b. Taxes. Prices do not include any present or future federal, state or local property, license,
privilege, sales, use, excise, gross receipts or other like taxes or assessments which may result
from transactions or any services performed in connection therewith. Any taxes, charges,
or duties imposed by any governmental authority on the sale of Deliverables will be paid by
Customer, in addition to the selling price specified by Company.
c. Payment Terms. Company will deliver to Customer an invoice with each shipment of
Deliverables hereunder. Customer will pay all invoiced amounts within 35 days of the invoice
date (subject to any early pay discounts that may be offered to Customer by Company in
its sole discretion). Customer will make all payments in United States dollars. Past due
invoices will be subject to a late payment service charge of 1.5% per month on any overdue
unpaid balance, equivalent to 18% per annum, or the maximum rate permitted by law,
whichever is less. Customer shall reimburse Company for all costs of collection, including,
without limitation, reasonable attorneys' fees, for any overdue amount owed by Customer to
Company, and such collection costs shall also be subject to interest charges.
4. QUOTATIONS.
a. Project Quotations. Project or new construction quotes are restricted to the specific
project quoted for the quantities, finishes, and series of Deliverables referenced on the quote.
Company reserves the right to require proof of sale of Company products for any quoted
project.
b. Stock Quotations. Deliverables fulfilling stock quotations may only be used for the
following: i) Stocking of the Customer’s shelves for small, quick-turn, discretionary projects,
or ii) Sale to a general contractor or installer for new construction. Stock quotations may
not be used for any project containing any Company no-substitution, specified products.
Deliverables purchased under Stock Quotations cannot be redistributed to other Customer
branch locations or re-sold to other resellers or used for aftermarket sales, end-user annual
contracts or sold over the counter to any walk in trade.
c. General. All quotes are subject to this Agreement, unless otherwise specified by
Company, and are subject to change at any time prior to Company’s acceptance of a purchase
order referencing the applicable quote number. Company, its representatives and employees
reserve the right, in their sole discretion and for any reason, to refuse a Customer’s request
to quote a price other than the standard list price, regardless of whether Company or its
representatives or employees have previously quoted discounted prices to the Customer on
some or all of its orders. Customer’s failure to comply with this Section 4 will be considered
a material breach of this Agreement, and will entitle Company to immediately terminate any
purchase orders and/or Customer’s ability to distribute Company’s products.
5. SECURITY INTEREST. Customer grants Company, and Company retains, a purchase
money security interest and lien on any and all of Customer’s rights, title and interest in
each Deliverable sold by Company to Customer, wherever located, until the invoice for the
applicable Deliverable(s) is paid in full, including any late charges and costs of collection.
Customer authorizes Company to, and will assist Company in, taking all necessary steps to
perfect and maintain Company’s interest in such Deliverables.
6. CREDIT TERMS. . Unless Customer pre-pays all of its purchase orders in advance, its
purchase orders will be subject to the credit limit and other terms of credit (“Credit Terms”)
set forth in Company’s credit application, which Credit Terms Customer acknowledges are
subject to change by Company at any time. Company reserves the right to request payment in
advance of shipment or any order or to request adequate assurances for Customer’s payment
of an order and may withhold or stop shipment, without any liability to Company, until
Customer submits payment or adequate assurance of payment.
7. RESALE OF DELIVERABLES. Customer agrees and warrants that it will offer Company
products in support of Company-written specifications and will maintain sufficient inventory
to adequately support End Users, installers, and/or general contractors’ needs. Company may
implement an MSRP or a resale pricing programs at any time in its sole discretion. Failure
to comply with such program(s) will be considered a material breach of this Agreement,
and will entitle Company to immediately terminate any purchase order and/or Customer’s
ability to distribute Company’s products. Customer shall, at its own expense, gain and
maintain sufficient knowledge of the industry and products competitive with Deliverables so
as to be able to (a) explain in detail to End Users, installers, and/or general contractors the
differences between the Deliverables and competing products, (b) ensure that an adequate
number of trained, capable and qualified technical personnel with sufficient knowledge of the
Deliverables and who have obtained all necessary licenses and permits are available to assist
End Users, installers, and/or general contractors, and (c) respond to such End Users, installers,
and/or general contractors with respect to the general operation and use of the Deliverables
including, but not limited to, (1) acting as a liaison between the End Users, installers and/or
general contractors and Company in matters requiring Company participation, (2) providing
general product information and configuration support on standard protocols and features,
(3) collecting relevant technical problem identification information, and (4) posting and
distributing any warranty information concerning the Products in accordance with Company’s
instructions. Customer is responsible for all service and support resulting from the re-sale
of any Deliverable to End-Users, installers and/or general contractors, examples of which
may include, but are not limited to, support activities such as installation, initialization,
software set-up, training, trouble-shooting, technical support and field service. In the event
Customer is unwilling or unable to perform said support activities, Company reserves the right
to recover from Customer any and all expenses incurred by Company to resolve the afore-
mentioned End-User, installer and/or general contractor issues. Technical product training is
recommended for Customer in order to fully service and support Deliverables purchased from
Company that are resold to End-Users, installers and/or general contractors.
8. DEFAULT. If Customer is in default of payment or otherwise with respect to any purchase
order or other contract with Company, Company shall have the right, in addition to all other
legal remedies and without prejudice to any of its right hereunder, to defer further shipments
under that or any other purchase order until such default is corrected and to declare all
outstanding bills of Customer to be immediately due and payable.
9. INSPECTION AND DELIVERY.
a. Inspection. Customer will inspect all Deliverables immediately after receiving them.
Customer will be deemed to have accepted the Deliverables unless Customer notifies
Company in writing of any nonconformance within 10 days of delivery and provides Company
written evidence reasonably documenting that nonconformance. Inspection of Deliverables at
Company’s facility is not permitted.
b. Delivery. Delivery schedules for Deliverables are based upon current production
capacities, material or component availability, and inventory, and may be changed by
Company as conditions require. Delivery schedules for services are based upon Company’s
prompt receipt of, and prompt access to, Customer’s equipment and all information necessary
to complete the services. In no event will any delivery date be construed as falling within the
meaning of “time is of the essence.” Partial delivery shall be accepted by Customer and paid
for at the price and on the terms stated herein. Any partial delivery shall constitute a separate
sale, and payment shall be separately made when due. If any part of a delivery hereunder
is not delivered by Company in accordance with Customer’s purchase order, this Agreement
shall not be affected thereby.
10. TITLE & RISK OF LOSS. Unless otherwise specified by Company, (i) where the Customer
is located in the United States, all Deliverables will be sold “Uniform Commercial Code, FOB
Origin, Company’s factory”; and (ii) where the Customer is located outside of the United
Allegion General Terms and Conditions of Sale and Service
Price Book 3
Effective August 12, 2017 • Rev. 08/17 5
TERMS & CONDITIONS
States, all Products will be sold “Ex-works, Company’s factory (Incoterms 2010).” In
either instance, title and risk of loss will pass to Customer upon delivery to the carrier at
Company’s factory, provided, however, as set forth herein, Company shall retain a security
interest in the Deliverables until full payment has been made therefore, and Customer
agrees, upon request, to do all things and acts necessary to protect Company’s interest by
adequately insuring the Deliverables against loss or damage from any cause and to have
Company named as an additional insured. Customer will promptly provide Company with a
copy of the relevant certificate of insurance upon Company’s request.
11. SHIPPING.
a. Freight Charges. Company will ship all Deliverables in accordance with Company’s
freight shipment guidelines, which are set forth on the My Allegion Portal (“Freight Shipping
Guidelines”), WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN.
b. Rush Charges. Expedited order options are available as set forth in Company’s Freight
Shipping Guidelines.
c. Packing and Marking. Company will pack, mark, and ship Deliverables according to its
standard procedures for shipment, unless the parties agree, in writing, that Company will
comply with any special instructions provided by Customer. Special instructions may result
in an increased price.
d. International Shipments. For all international orders, a Shipper’s letter of instruction
must be submitted in writing with the order. Failure to do so will result in the order being
rejected. Complete adherence to this order requirement will be strictly enforced. Company
will not be held liable for any charges resulting from delays due to lack of complete
required information being supplied.
e. Once received by the Company, a purchase order cannot be combined with any other
order to increase average order size as it relates to Company’s Freight Shipping Guidelines.
However, for orders placed under Company’s FastTrack 24 Hour/5 Day Program (available
for Schlage, Von Duprin, LCN and Glynn-Johnson products); ii) FastTrack 24 Hour/3 Day
Program (available for Ives products); or ProExpress (available for specific product lines
stated in the ProExpress price book for Falcon, Ives, Glynn Johnson, LCN, Schlage and Von
Duprin products), the applicable brands or product categories may, subject to certain order
requirements identified by Company, be combined on a single order to increase average
order size used in Company’s Freight Shipping Guidelines.
12. CLAIMS. All claims must be submitted in writing to Company as follows: (i) All claims
for prices must be submitted within thirty (30) days from the date of invoice; (ii) All claims
regarding Deliverable quantity or incorrect orders must be submitted within ten (10) days
from the date of delivery; (iii) All claims for damage to Deliverables (while in the care,
custody, and control of Company) must be submitted within thirty (30) days from the date
of invoice; (iv) All claims for loss or damage to Deliverables while in the care, custody, and/
or control of a carrier will be the responsibility of Customer, unless otherwise agreed by the
parties.
13. PRODUCT CHANGES. Company’s product policy is one of ongoing update and
revision, and accordingly, Company reserves the right to change, without notice, the design
of, or the process of manufacturing, the Deliverables covered by this Agreement.
14. PRODUCT USAGE LIMITATION. Customer agrees: (i) not to sell or use a Deliverable
in any manner contrary to the manner in which the Deliverable is intended to be used; and/
or (ii) not to modify the design of any Deliverable for use with another product without the
prior written consent of Company.
15. PRODUCT RETURNS. Unless otherwise agreed by the parties in writing, Deliverables
that are correctly furnished by Company per the purchase order may not be returned
unless Customer receives written authorization from Company. If returns are authorized
by Company, a return merchandise authorization (“RMA”) number must be provided by
Company. Deliverables identified under such RMA must be returned to Company within 90
days of issuance of the RMA. Such RMA number and any accompanying RMA documents,
the original invoice number, and a written explanation for the return must be included
with the returned Deliverables in order for Company to inspect and approve a credit for
the return. For warranty returns, a credit in the amount of the original purchase price
will only be issued if, after Company’s receipt and inspection of the returned Deliverables,
Company confirms, in its sole discretion, the defect is valid and approves the return. For
non-warranty returns/convenience returns, in the event Company approves such a
return, in its sole discretion, the following shall apply: (a) the total amount of Deliverables
requested to be returned shall be a minimum of $250.00; (b) a credit will be made to
Customer’s account in the amount of the original purchase price less freight and a handling
charge of 45% of the net material on the original invoice; and (c) only Deliverables that are
new, current, standard, non-obsolete, non-specially manufactured, unused, in their original
condition as at the time of sale by Company to Customer, in their original packaging and in
Customer’s inventory less than 180 days from the date of shipment by the Company, and
not ordered as part of a master key solution may be considered by Company for return.
Such credit will only be issued if, after Company’s receipt and inspection of Deliverables,
Company approves the return. The amount of final credit will be determined upon receipt
at the factory and following Company’s inspection and analysis of the condition of the
returned material. Company retains the right to deny credit to anyone for any reason.
16. CONFIDENTIAL INFORMATION.
a. Non-Use And Non-Disclosure. Customer shall not use the Confidential Information of
the Company except for the purpose of performing its obligations under this Agreement or
exercising the rights granted herein (the “Purpose”). Customer shall protect Confidential
Information of the Company from disclosure and unauthorized use in the same manner
that it protects its own Confidential Information, but in no event shall such standard of
care be less than reasonable care. Customer may disclose Confidential Information of the
Company only to its employees who require such information for the Purpose and who are
subject to confidentiality obligations at least as protective as those set forth herein.
b. Proprietary Information and Advice. (a) All designs, data, and specifications provided
by Company are proprietary and may not be disclosed or reused by Customer without the
prior written consent of Company; (b) Company assumes no obligation or liability for any
advice given by Company, the results obtained, or damages incurred as a result of such
advice, and all such advice is given and accepted at Customer’s risk.
c. Return. Upon the termination or expiration of a purchase order or this Agreement
or upon the request of the Company, the Customer agrees to end all further use of, to
immediately return to the Company the original version of, and to delete or destroy all
copies of, any and all Confidential Information of the Company.
17. TRADEMARKS. Except as agreed to by Company in writing, Customer agrees not to
(a) use Company’s name in any form of publicity; or (b) use, create, register or market,
directly or indirectly, in whole or in part, Company’s names, logos, brands, or any other
trademarks, or names that are now or may hereafter be owned by Company, as part of
Customer’s corporate or business name, as part of an internet domain name, uniform
resource locator (URL), or in any way connected with Customer’s business, trade address
or other designations. Upon termination of this Agreement or upon the request of
company for any reason, any use of Company’s trademarks or names will be immediately
discontinued.
18. LIMITED WARRANTY.
COMPANY MAKES NO OTHER WARRANTIES EXCEPT THOSE STATED IN
COMPANY’S LIMITED WARRANTY IN EFFECT ON THE DATE COMPANY
ACCEPTS EACH APPLICABLE PURCHASE ORDER (“LIMITED WARRANTY”).
THE LIMITED WARRANTY MAY BE FOUND IN THE APPLICABLE PRICE BOOK
AND ON THE ALLEGION CUSTOMER WEBSITE, WHICH TERMS ARE EXPRESSLY
INCORPORATED HEREIN BY REFERENCE. COMPANY WILL MAIL CUSTOMER A
HARD COPY OF THIS WARRANTY UPON CUSTOMER’S WRITTEN REQUEST. IN
THE EVENT THAT CERTAIN DELIVERABLE WARRANTIES ARE NOT FURNISHED
BY THE COMPANY TO CUSTOMER, COMPANY WARRANTS ONLY TO CUSTOMER
THAT THE DELIVERABLES WILL BE FREE FROM DEFECTS IN MATERIAL
AND WORKMANSHIP FOR A PERIOD OF 12 MONTHS FROM THE DATE OF
SHIPMENT OF THE DELIVERABLES. COMPANY’S SOLE OBLIGATION UNDER
THIS WARRANTY IS LIMITED TO REPAIRING OR REPLACING, AT COMPANY’S
OPTION, THE DEFECTIVE DELIVERABLE, PROVIDED WRITTEN NOTICE OF THE
DEFECT OR NONCONFORMANCE IS PROVIDED BY CUSTOMER WITHIN 30 DAYS
OF DISCOVERY OF THE DEFECT OR NONCONFORMANCE. COMPANY DISCLAIMS
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE
DELIVERABLES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
OF NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR
PURPOSE.
a. Exclusions. The provisions of this Limited Warranty do not apply to Deliverables
that: (A) are not the proper size for the application; (B) are not installed in accordance
with Company’s published installation instructions; (C) are installed with improper or
incorrect parts and/or are used for purposes for which they are not designed or intended;
(D) have been repaired or altered without the Company’s prior written consent; (E) have
been subjected to misuse, abuse, negligence or accident; (F) have been improperly stored,
installed, maintained or operated; (G) have been used in violation of written instructions
provided by Company to Customer; (H) have been subjected to improper temperature,
humidity, or other environmental conditions, or (I) have been affected by normal wear
and tear. In addition, the provisions of this Limited Warranty do not apply to any defects
or issues with the design or performance of equipment or products not manufactured
by Company, nor does it apply to any code compliance or permit requirements for the
assembly, installation, erection or construction of any goods. Company is not responsible
for loss or damage resulting from use of Deliverables in conjunction with parts or systems
not manufactured by Company. Accessories or products furnished by the Company, but
manufactured by others, shall carry whatever warranty the manufacturers have conveyed
to the Company and which can be passed to Customer.
b. Services. Company warrants that its services will be free from defects in material
and workmanship for a period of 12 months from the date of completion of the particular
items of service. Company’s sole obligation under this service warranty is limited to repair
or reperformance, at its option of the service, provided however, if repair or reperformance
is either impractical or impossible, the Company will refund to Customer that portion
of the price paid to Company for any defective service, provided written notice of the
defect or nonconformance is provided by Customer within 30 days of discovery of the
nonconformance.
c. Notification. Customer agrees to immediately notify Company in writing if any claim is
made against Customer for any damages caused by any modules, parts, products, service or
other Deliverables which may be the direct result of any defect in the manufacture of such
aforementioned products. Customer agrees to cooperate with Company and its counsel in
the defense of such claim and Customer agrees not to settle such claim without Company’s
written consent. If Customer fails to notify Company of such claim or fails to cooperate in
such defense as aforesaid, then Company shall be discharged from any obligations under
this Section and shall have no further liability to Customer.
d. Exceptions. The following costs and expenses are not covered by the provisions of
these limited warranties: (i) labor costs for the removal and reinstallation of Deliverables
or other manufacturer’s products; (ii) shipping and freight expenses required to return
Deliverables to Company; (iii) normal maintenance; and (iv) economic losses. In addition,
the provisions of this warranty are not applicable to anything other than defects in
Company’s material (products only) or workmanship.
19. LIMITATION OF REMEDIES.
CUSTOMER’S EXCLUSIVE AND SOLE REMEDY ON ACCOUNT OF, OR IN RESPECT
OF, THE FURNISHING OF NON-CONFORMING DELIVERABLES, SHALL BE TO (A)
SECURE REPAIR OR REPLACEMENT OF THE PRODUCTS; OR (B) SECURE REPAIR
OR RE-PERFORMANCE OF THE SERVICES OR TO OBTAIN A REFUND OF THE PRICE
PAID FOR THE DEFECTIVE SERVICE, ALL AT COMPANY’S OPTION. IN NO EVENT
WILL THE COMPANY’S MAXIMUM LIABILITY EXCEED THE SELLING PRICE FOR THE
DELIVERABLE. THE WARRANTY, OBLIGATIONS AND LIABILITIES OF COMPANY
(INCLUDING ITS SUPPLIERS) AND THE RIGHTS AND REMEDIES OF CUSTOMER
ARE EXCLUSIVE AND ARE IN LIEU OF AND CUSTOMER HEREBY WAIVES AND
RELEASES ALL OTHER WARRANTIES, OBLIGATIONS, REPRESENTATIONS
OR LIABILITIES EXPRESS OR IMPLIED ARISING BY LAW, IN CONTRACT, TORT
(INCLUDING NEGLIGENCE OR STRICT LIABILITY) OR OTHERWISE, INCLUDING
BUT NOT LIMITED TO (I) ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTY IMPLIED THROUGH
COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE OR
(II) CLAIMS ARISING OUT OF THE NEGLIGENCE OF COMPANY OR COMPANY’S
SUPPLIERS OR (III) ANY OTHER CLAIM ARISING OUT OF, CONNECTED WITH, OR
RESULTING FROM THE PERFORMANCE OF COMPANY OR FROM THE DESIGN,
MANUFACTURE, SALE, REPAIR, LEASE OR USE OF THE DELIVERABLE, OR ANY
COMPONENT THEREOF, DELIVERED OR RENDERED HEREUNDER OR OTHERWISE.
20. INDEMNIFICATION AND LIMITATION OF LIABILITY. a. Customer shall indemnify,
defend and hold Company, and its officers, directors, employees, customers, Affiliates,
suppliers, users and agents, (collectively the “Indemnitees”) harmless from and against any
and all damages, claims, losses, expenses, costs, obligations, liabilities, including without
limiting the generality of the foregoing, liabilities for court costs and attorneys’ fees,
suffered directly or indirectly by an Indemnitee by reason of, or arising out of any injury,
death or loss to any person, or injury to any property (collectively, “Damages”), received
Price Book 3
Effective August 12, 2017 • Rev. 08/17
6
TERMS & CONDITIONS
or sustained by any person(s) or property, arising out of, occasioned by, attributable or
related to i) any breach of any representation or warranty made by Customer, its officers,
directors, employees, affiliates, users, agents, representatives or customers to Company or
any third party, (ii) any failure by Customer to perform or fulfill any of its covenants, acts
and/or omissions to Company or to any third party, or (iii) any litigation, proceeding or claim
by any third party relating in any way to the obligations of Customer and/or the Deliverables
sold by Company to Customer hereunder. Customer shall not consummate any settlement
of any indemnified claim without the Indemnitees’ prior written consent. Customer’s
obligation to indemnify Indemnitees will continue in full force and effect notwithstanding
the termination or expiration of any order under this Agreement. In any claim against an
Indemnitee by an employee of Customer or any subcontractor or anyone directly or indirectly
employed by any of them or anyone for whose acts they may be liable, the indemnification
obligations set forth in this Section shall not be limited in any way by or for Customer or any
subcontractor under any applicable worker’s compensation act, disability or other employee
benefit act, or insurance coverage. This provision shall survive termination of any order or
Agreement. IN NO EVENT WILL COMPANY, ITS OFFICERS, DIRECTORS, EMPLOYEES,
CUSTOMERS, AFFILIATES, USERS AND AGENTS, (NOR COMPANY’S SUPPLIERS) BE
LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE
DAMAGES OF ANY KIND OR NATURE UNDER ANY CIRCUMSTANCES INCLUDING,
BUT NOT LIMITED TO, LOSS OF USE OF THE PRODUCTS, SERVICE INTERRUPTION,
LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF INTEREST, LOST GOODWILL, LOSS
OF DATA, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, LOSS BY REASON
OF SHUTDOWN OR NON-OPERATION, INCREASED EXPENSES OF OPERATION,
OR CLAIMS OF CUSTOMER’S CUSTOMERS, OR ANY OTHER LOSSES OR DAMAGES
ARISING OUT OF ANY LACK OR LOSS OF USE OF THE DELIVERABLES WHETHER
BASED ON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO,
STRICT LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
b) INTELLECTUAL PROPERTY INDEMNITY. Company makes no representation or
warranty to the Customer that the Deliverables shall not infringe any intellectual property
rights including, without limitations, claims arising from patent, copyright, trademark, trade
secret, or other intellectual property infringement. Customer agrees to hold Company
harmless from and defend the Company against any such claim of intellectual property
infringement, including any Damages resulting from that claim, the cost of complying
with any preliminary or permanent injunction, and all other costs of defense (including the
attorneys’ fees and costs), in connection with the foregoing.
c) To the extent that applicable law does not permit any limitations set out in this
Agreement, such limitation shall not be applied or invoked. Nothing in this Agreement will
be interpreted to disclaim liability of Company or the Indemnitees for gross negligence or
willful misconduct. The limitations of remedy and liability herein shall not be interpreted to
affect Company’s obligations, if any, for claims for (i) property damage, (ii) personal injury,
or (iii) wrongful death asserted by persons who are not parties to or beneficiaries of this
Agreement. Further, the limitations of remedy and liability herein shall not be interpreted
to limit Company’s or Customer’s right, if permitted by applicable law, to assert a claim for
contribution among joint tortfeasors in connection with a claim by a person who is not a party
to this Agreement.
21. CERTIFICATIONS. Certification of Deliverables for compliance with UL and ANSI
standards are tested and performed by third-party independent laboratories. Any field
modification or alteration of certified Deliverables will void certification and Company is not
liable to Customer to certify any modified or altered Deliverable.
22. TERM FOR CLAIMS. NO ACTION ARISING OUT OF ANY CLAIMED BREACH OF
THIS AGREEMENT BY COMPANY MAY BE BROUGHT BY CUSTOMER MORE THAN
ONE (1) YEAR AFTER THE CAUSE OF ACTION HAS ARISEN.
23. CONSUMER PRODUCTS
WITH RESPECT TO “CONSUMER PRODUCTS” AS DEFINED UNDER THE MAGNUSON-
MOSS WARRANTY ACT (“MMWA”), THE FOLLOWING STATEMENTS ARE MADE. (A)
SOME STATES OR LOCAL LAWS DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU;
(B) IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITED
TO THE DURATION OF THE WARRANTY PROVIDED IN SECTION 18 ABOVE. (C)
SOME STATES OR LOCAL LAWS DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT APPLY TO YOU; AND (D) THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE OR LOCATION TO LOCATION.
24. FORCE MAJEURE/EXCUSABLE DELAY. Any delay or failure of Company to perform
its obligations hereunder will be excused to the extent that it is caused by an event or
occurrence beyond Company’s control such as, by way of example and not by way of
limitation, acts of God, acts by any governmental authority (whether valid or invalid),
governmental laws and regulations not presently in effect, fires, floods, windstorms,
explosions, riots, natural disasters, wars, sabotage, accidents, labor problems (including,
without limitation, lockouts, strikes, and slowdowns) at Company’s facility, its source plant
or their suppliers, inability to obtain power, material, labor equipment, or transportation, or
court injunction or order. The delivery date will be extended for a time equal to that of the
delay and the schedule for Company’s performance will be deemed adjusted to that effect.
25. ENTIRE AGREEMENT AND AMENDMENT. This Agreement, together with the
attachments, exhibits, webpages, or supplements specifically referenced and incorporated
herein, constitute the entire agreement between Company and Customer with respect to
the matters contained herein and supersede all previous communications, representations,
or agreements, either oral or written between Company and Customer. No agreement or
understanding varying or expanding this Agreement will be binding upon either party unless it
is in writing and signed by a duly authorized representative of each party hereto.
26. CONFLICTS. In the event of any conflict or inconsistency between the terms of any
agreement, or any part of an agreement or the various documents (including, but not
limited to, electronic documents) between Company and Customer, unless the parties
agree otherwise in writing, the various components of the agreements shall be given the
following precedence (in descending order of precedence): a) any master agreement or long
term agreement between Company and Customer; b) any specific terms, conditions and/
or warranties of the individual products or Deliverables; c) the terms and conditions of this
Agreement, and d) any purchase order.
27. UNSATISFACTORY CREDIT/TERMINATION FOR INSOLVENCY OR DEFAULT.
Customer shall furnish Company with statements evidencing Customer’s financial condition
as Company may, from time to time, reasonably request, and shall notify Company
immediately of any and all events that may have a material adverse effect on Customer’s
business or financial condition. If Company determines, in its sole discretion, that Customer’s
financial condition or creditworthiness is inadequate or unsatisfactory, then in addition to
Company’s other rights, Company may without liability or penalty, take any of the following
actions: (i) modify the payment terms for any outstanding and/or future purchases; (ii)
cancel any previously accepted orders; (iii) delay any further shipment of Deliverables to
Customer; or (iv) any combination of the above.
Company may immediately terminate an order from Customer by giving written notice to
Customer in the event of the happening of any of the following or any other comparable
event: (i) insolvency of the Customer; (ii) filing of a petition in bankruptcy by or against the
Customer; (iii) appointment of a receiver or trustee for the Customer; (iv) execution of an
assignment for the benefit of creditors by the Customer, all of which will allow Company to
demand reclamation of all affected orders; (v) Customer ceases or threatens to cease to
trade; (vi) Company determines that Customer does not meet or no longer meets the credit
requirements of Company or Customer’s credit account is closed; (vii) any Customer violation
of law, specifically including, without limitation, those laws set forth in this Agreement.
In the event of termination in accordance with this section, Company will not be obligated
to accept any existing or additional orders from Customer and Company will be released
from its obligation to deliver under orders accepted prior to such termination. The rejection
or termination of any order by Company will not entitle Customer to any termination or
severance compensation, or to any payment in respect to any goodwill established by
Customer, or render Company liable for damages on account of the loss of prospective
profits, or on account of any loss, expenditure, investment or obligation incurred or made by
Customer.
No action taken under this Section 27 by Company (nor any failure of Company to act under
this Section 27) will constitute a waiver by Company of any of its rights to enforce Customer’s
obligations, including the obligation of Customer to make payments as required under this
Agreement. Upon termination of any order, all amounts owed by Customer to Company will
become immediately due and payable, whether or not otherwise then due or payable.
28. CREDIT RISK ON RESALE OF DELIVERABLES. Customer is responsible for all credit
risks with respect to, and for collecting payment for, all Deliverables sold to third parties
(including End Users, installers, and/or general contractors) whether or not Customer has
made full payment to Company for such Deliverables. The inability of Customer to collect
payment for any Deliverable shall not affect Customer’s obligation to pay Company for any
Deliverable.
29. GOVERNING LAW; VENUE; AND EXPENSES. Any dispute or claim relating to this
Agreement shall be governed by and construed according to the laws of the State of Indiana
(excluding its conflict of laws principles); and not by the provisions of the 1980 United
Nations Convention on the International Sale of Goods. Any disputes or claims shall be
instituted and maintained in the courts of the State of Indiana. Customer consents to the
exercise of jurisdiction over it by such courts and agrees that Indiana is not an inconvenient
forum for any action arising from or relating to this Agreement. Customer agrees to pay for
all expenses (including, but not limited to, collection costs, court costs and attorneys’ fees)
incurred by Company in enforcing the obligations of Customer under this Agreement.
30. RELATIONSHIP OF THE PARTIES. Nothing in this Agreement or any other document
creates an employment, partnership, joint venture, or agency relationship between Company
and Customer, including that of franchisee/franchisor. No party will have any power or
authority to enter into any commitment on behalf of or otherwise bind the any other party
on any matter. No employee of Customer will be deemed to be an employee of Company.
If any provision of this Agreement is deemed to create a franchise relationship or business
opportunity between the Parties, then Company may terminate any purchase order or
this Agreement or the Parties shall negotiate in good faith to modify this Agreement so as
to effect the original intent of the Parties as closely as possible in a mutually acceptable
manner in order that the transactions contemplated hereby are consummated as a reseller
agreement and not a franchise or business opportunity agreement.
31. SETOFF. Customer does not have the right to setoff or to back charge against any
amounts which become payable to Company under this Agreement or otherwise. Company
will not accept responsibility for backcharges for the cost of material or labor by Customer or
any third party.
32. ELECTRONIC COMMUNICATIONS AND ELECTRONIC SIGNATURES. Both parties
expressly agree to electronic transactions and acknowledge that documents they sign
electronically will bind them to the same extent as a paper signature. Customer represents
and warrants to Company that only employees authorized to bind Customer legally shall
electronically sign any document under this Agreement. Customer shall comply with any
method of electronic communication/payment processing specified by Company, including
electronic funds transfer, pay-on-receipt processes/systems, order transmission, releases,
electronic signature, and electronic communication systems, including, without limitation, the
use of electronic data interchange (“EDI”) portals. Notwithstanding the foregoing, e-mails,
even those containing a signature block of one of Company’s representatives, shall not
constitute a signed writing.
33. COMPLIANCE WITH APPLICABLE LAWS.
a. General. Company and Customer will comply with all applicable federal, state and
municipal laws, regulations, codes, ordinances and orders that pertain to the Deliverables,
including but not limited to full compliance with any applicable provisions of The Health
Insurance Portability and Accountability Act. Where the Customer is located outside the
United States, or where the customer intends to ship the product outside the United States,
the Customer shall be responsible for compliance with all U.S. export laws, and for filing all
U.S. Electronic Export Information, as applicable.
b. The Customer acknowledges and agrees that: (i) it shall not violate applicable laws
and regulations in performing its duties under this Agreement; (ii) it does not and shall not
engage in any conduct that shall violate any applicable anti-bribery or anti-corruption laws
or regulations; (iii) it (and its owners, officers, directors, employees and agents) shall not
pay, offer, promise or authorize the payment of, either directly or indirectly, anything of value
(including but not limited to cash, gifts and entertainment) to (a) any government official
or employee of any government; (b) any official or employee of any department, agency, or
instrumentality of a government; (c) any employee of any corporation or entity owned or
controlled by a government; (d) any family member of such officials or employees; (e) any
Price Book 3
Effective August 12, 2017 • Rev. 08/17 7
TERMS & CONDITIONS
political party, party official, or political candidate; or (f) any other persons, owners, officers,
directors, employees and agents of any corporation or entity; to improperly or illegally assist
in obtaining or retaining business (including but not limited to any contracts, avoidance
of duties or reduction of tariffs, reduction of taxes or to obtain money owed, or to obtain
regulatory approval) or for the purpose of causing, soliciting or inducing the sale and purchase
of the Deliverables by any party, and (iv) it has full knowledge of and will comply with the
Company’s Code of Conduct for Business Partners as set forth on the Allegion customer
website, WHICH IS HEREBY INCORPORATED BY REFERENCE.
c. The Customer shall indemnify and hold the Company harmless from any claim, demand,
expense or cost arising from any breach of this Article.
d. The Customer shall permit the Company to conduct an audit or review of the Customer’s
financial books and records and business operations at such other times that the Company
considers it necessary to confirm compliance with this provision. Such audit may be
conducted by representatives of the Company or, at the Company’s sole discretion, by a
certified public accounting firm selected by the Company. The Customer shall cooperate with
any inquiries from the Company’s Ethics & Compliance Group.
e. A violation of this provision constitutes a material breach of this Agreement and the
Company may terminate any purchase order or this Agreement immediately, with no
opportunity to cure, in accordance with Section 27 of this Agreement.
f. Notwithstanding the foregoing provisions of this Section 33, (i) Company is not responsible
for obtaining or maintaining any permits for the performance of services or the verification
or compliance with any code requirements relative to the performance of services, (ii) to the
extent any sale of Deliverables pursuant to this Agreement may require approval of the U.S.
Government, Company’s obligations under this Agreement are conditioned upon the grant of
such approval and upon compliance by Customer with any restrictions imposed by the U.S.
Government in connection with such approval, and (iii) in the event the Deliverables are to
be used in a nuclear facility, the Customer shall, prior to such use, arrange for insurance or
governmental indemnity protecting Company against liability. The Customer hereby releases
and agrees to indemnify Company and its suppliers for any nuclear damage including, but not
limited to, loss of use, in any manner arising out of the nuclear incident, whether alleged to be
due, in whole or in part by Company or its suppliers.
g. No Inducements. Each party represents to each other that neither it nor any person
acting on its behalf has, in contravention of any applicable law, given or offered to give or will
give or offer to give, any sum of money or other material consideration to any person, directly
or indirectly, as an inducement to obtain business hereunder or to influence the granting
of licenses or other governmental permissions to enter into this Agreement or perform
obligations hereunder.
h. Equal Employment Opportunity. Company is a U.S. federal contractor that complies
with Executive Order 11246, as amended, and applicable regulations in 41 CFR Parts 60-1
through 60-60, 29 U.S.C. § 793 and applicable regulations in 41 CFR § 60-741; and 38 U.S.C.
§ 4212 and applicable regulations in 41 CFR Part 60-250 and 60-300. THE FOLLOWING
PROVISIONS ARE INCORPORATED HEREIN BY REFERENCE: Executive Order 11246, as
amended by Executive Order 13672, and 41 CFR § 60-4.3(a); Executive Order 11701 and 41 CFR
§§ 60-250.5(a), 60-300.5; Executive Order 11758 and 41 CFR § 60-741.5(a); U.S. immigration
laws, including the L-1 Visa Reform Act of 2004 and the H-1B Visa Reform Act of 2004; and
Executive Order 13496.
i. Ethical Business Conduct. Customer shall adopt and comply with Company’s Business
Partner Code of Conduct which is EXPRESSLY INCORPORATED HEREIN BY REFERENCE.
34. REPRESENTATIONS AND WARRANTIES. Customer represents, warrants and
covenants to Company that: (a) it has the right, power, and authority to enter into this
Agreement and fully perform its obligations hereunder; (b) it has all necessary rights in and
to its respective Content and Marks for use within the scope of this Agreement, including
the licenses granted herein; and (c) it complies, and at all times shall comply, with all laws,
rules, and regulations in effect that are applicable to its performance under this Agreement,
including obtaining all such approvals and/or permits as may be required hereunder.
35. NO THIRD-PARTY BENEFICIARY. Each party is entering into this Agreement solely
based on the representations contained herein for its own purposes and not for the benefit of
any third party.
36. NOTICES AND CHANGE OF ADDRESS. All notices or other communications under
this Agreement shall be in writing and delivered in person, or sent by receipted courier,
express mail, e-mail, or postage prepaid certified or registered mail, addressed to the party
for whom it is intended, at the addresses set forth in this Agreement. Either party may
change its address for notice by giving written notice to the other party. Any notice or other
communication shall be deemed given no later than the date actually received. Notice by
courier, express mail, certified mail, or registered mail shall be deemed given on the date it
is officially recorded as delivered and, in the absence of such record of delivery, it shall be
rebuttably presumed to have been delivered on the third Business Day after it was deposited.
Notices sent by e-mail require tangible confirmation of receipt from addressee.
37. ASSIGNMENT. Customer may not assign this Agreement without the prior written
consent of Company. Company may assign its rights and delegate its duties under this
Agreement, without the prior consent of Customer, to an Affiliate, or to a third party in the
event of a spin-off, merger, business combination, consolidation or sale of all, or substantially
all, of its assets or business that are related to this Agreement. The rights and duties in this
Agreement shall bind and inure to the benefit of any such assignee.
38. SEVERABILITY. If any provision of this Agreement is held to be invalid, illegal, or
unenforceable under any statute, regulation, ordinance, executive order, or other rule of law,
that provision will be deemed severed to the extent necessary to comply with such statute,
regulation, ordinance, order, or rule. In the event such provision is deemed severed, the parties
will negotiate in good faith to arrive at an alternative arrangement approximating the original
business objective of the parties. The remaining terms and conditions of this Agreement will
remain in effect.
39. NO IMPLIED WAIVER. The failure of either party at any time to require performance by
the other party of any provision of this Agreement will in no way affect the right to require
such performance at any time thereafter, nor will the waiver of either party of a breach of any
provision of this Agreement constitute a waiver of any succeeding breach of the same or any
other provision.
40. MISCELLANEOUS. (a) This Agreement does not make either party the agent or legal
representative of the other party. Neither party is authorized to create any obligation on
behalf of the other party including, but not limited to, the obligation for payment of any
service or warranty obligation hereunder; (b) The rights and remedies herein reserved to
Company are cumulative and additional to any other rights and remedies provided at law or
equity; (c) The official text of this Agreement is in the English language. If this Agreement is
translated into another language, the English text will govern any question with respect to
interpretation; (d) The headings in this Agreement are for convenience of reference only and
do not affect the meaning of this Agreement in any manner.
DEFINITIONS.
Capitalized terms have the meanings set forth in this Section, or in the Section in which they
first appear in this Agreement.
“Agreement” means these Allegion Terms and Conditions of Sale and Service, together
with any applicable Country Supplement or Region Supplement provided by Company, and
all of the documents referenced herein or therein.
“Affiliate” means any Person that directly or indirectly, through one or more intermediaries,
controls, is controlled by, or is under common control with, the Company. The term
“control” (including the terms “controlled by” and “under common control with”) means
the possession, directly or indirectly, of the power to direct or cause the direction of the
management and policies of a Person, whether through the ownership of voting securities, by
contract or otherwise.
“Business Day” means any day except Saturday, Sunday or any other day on which
commercial banks located in the United States are authorized or required by Law to be closed
for business.
“Company” means Schlage Lock Company, LLC or any subsidiary or affiliate thereof selling
products that are part of the Allegion product portfolio. Schlage Lock Company and/or its
subsidiary or affiliates will be severally but not jointly liable under the Agreement.
“Company Marks” refers to the Marks of Company.
“Confidential Information” shall mean any and all information provided by either party
to the other party pertaining to the disclosing party’s business. Confidential Information
shall include, but not be limited to, any bitting lists, formulae for products, manufacturing
processes, production techniques, packaging processes, methods, research materials, ideas,
marketing plans and related materials, quality standards, test results and data, apparatus,
engineering drawings, contract documents, computer software, hardware, or firmware,
business activities information such as financial information, reports, projections, books
and records, customer and supplier information, and operations, customer and supplier lists
and data, specifications, know how, and other Proprietary Information or Trade Secrets (as
defined herein) that either party may furnish to the other party. Confidential Information
shall not include information that: (a) is or becomes publicly known if such public knowledge
or disclosure is not the result of any act or failure to act on the part of the receiving party;
(b) is, at the time of disclosure, already known to the Receiving Party without utilizing the
Confidential Information; (c) is information disclosed to the Receiving Party by a third party
which is not to the Receiving Party’s knowledge, after inquiry of the third party, under a duty
of confidentiality to the Disclosing Party; or (d) is independently developed by the Receiving
Party without the use of Confidential Information. The Receiving Party shall have the burden
of proof as to prior knowledge and absence of breach. Confidential Information may be
furnished in any tangible or intangible form including, but not limited to, writings, drawings,
computer and other electronic media, logic diagrams, component specifications, graphs,
prototypes, samples, or verbal communications and regardless of whether such information
is marked or designated as “confidential.” For the avoidance of doubt, all information,
knowledge or data disclosed by Company to Customer, regardless of whether disclosed in
written, tangible, oral, visual or other form, including, without limitation, sample products,
equipment, software, or other objects or material, provided by Company to Customer, and all
information, knowledge or data which was obtained by Customer from visits to Company’s
facilities, shall be considered “Confidential Information” under this Agreement.
“Content” means all information (including without limitation any text, music, sound,
photographs, video, graphics, data or software), in any medium, on a particular Company
Web page or Website or in Marketing Materials.
“Customer” means the purchaser of Deliverables from Company.
“Deliverables” means any good or service or both purchased by Customer from Company
under these General Terms and Conditions of Sale and Service.
“End Users” means the purchaser that (a) has acquired a Deliverable from Customer for (i)
its own and its Affiliate’s/Affiliates’ internal use and not for resale, remarketing or distribution
or (ii) incorporation into its own products and (b) is an individual or entity, other than any
federal, state or local agency, office or division.
“IP” means all intellectual property and industrial property rights comprising or relating to/
of the following: (a) Patents; (b) Trademarks; (c) internet domain names, whether or not
Trademarks, registered by any authorized private registrar or Governmental Authority, web
addresses, web pages, website and URLs; (d) works of authorship, expressions, designs and
design registrations, whether or not copyrightable, including copyrights and copyrightable
works, software and firmware, application programming interfaces, architecture, files,
records, schematics, data, data files, and databases and other specifications and
documentation; (e) Trade Secrets; and (f) all other intellectual property and industrial
property rights, and all rights, interests and protections that are associated with, equivalent
or similar to, or required for the exercise of, any of the foregoing, however arising, in each
case whether registered or unregistered and including all registrations and applications for,
and renewals or extensions of, such rights or forms of protection pursuant to the Laws of any
jurisdiction throughout in any part of the world.
“Marketing Materials” means all marketing brochures, buckslips, pamphlets, emails, text,
call scripts or other material, whether in printed format, audio or audiovisual format, or in
any other format, that contain any (i) Content relating to the Company Deliverables or (ii)
Company Marks.
“Marks” means collectively the domain names, trademarks, trade names, service marks,
trade dress, logos, and the like used or provided by either party for use in connection with this
Agreement.
“Patents” means all patents (including all reissues, divisionals, provisionals, continuations
and continuations-in-part, re-examinations, renewals, substitutions and extensions thereof),
patent applications, and other patent rights and any other Governmental Authority-issued
indicia of invention ownership (including inventor’s certificates, petty patents and patent
utility models).
“Person” means a person or entity.
“Price Books” mean Company’s current Price Book in effect for the applicable Deliverable
being purchased by Customer.
“Trade Secrets” means and includes business or technical information of either party,
including processes, formulas, devices, techniques, compilations and other material that
a party attempts to maintain in secret and that derive commercial value for such party
from not being generally known to the public or readily ascertainable through independent
development or reverse engineering.
8
Price Book 3
Effective August 12, 2017 • Rev. 08/17
TYPE 3
For Use with All Offset Closers and Pivot Sets
TYPE 1
For Doors Hung in Center of Frame
TYPE 4
For Doors Hung Flush with Face of Frame
TYPE 5
For Use with Offset Closers and Pivot Sets
Left Hand Shown
CUSTOM CHARGE:
$ 129.15 list adder single door
$ 263.99 list adder double door
$ 367.46 list adder single door
$ 734.92 list adder double door
$ 367.46 list adder single door
$ 734.92 list adder double door
$ 459.33 list adder single door
$ 918.67 list adder double door
Special door markings and bulk packaging markings
available at no charge.
FABRICATION:
•
All items cut with tolerance -0+1/8"(3.2) to 1/2"(12.7)
•
Drilling according to industry practice.
•
All threshold straight cut.
•
NH - No Holes Standard List - All models where NH is standard can have
holes drilled as Engineered special, customer must submit template
with order.
•
MITER $ 4.74 list each
•
RIPPING $ 5.90 list per foot
•
SPOT WELD $ 8.54 list per foot
•
BEVELING $ 5.90 list per foot
•
FLOOR CLOSER COVER: Prices are addition to threshold list prices.
•
PIVOT HOLES $ 21.00 list each
•
COPING (Detail required): - L cut $ 21.00 net each
- U cut $ 42.00 net each
•
RETURN ENDS $ 94.63 added to total list price threshold
Left Hand Shown
Left Hand Shown
Left Hand Shown
BRONZE FINISHING:
•
B-ORB (Oil Rubbed Bronze Finish) Add 40% to list price
•
B-POL (High Buff Polished Bronze - Add 40% to list price
models 7000, 7332, 7334, 7335,
7336, 7338 only)
•
B-SAT (Satin Polished Bronze - Add 40% to list price
models 7000, 7332, 7334, 7335,
7336, 7338 only)
OPTIONS:
•
E Epoxy Tread $ 10.03 list adder per foot
•
EL Luminescent and Epoxy Tread $ 10.03 List Adder per foot
•
V3 Full Body Fill for Thresholds $ 14.36 List Adder per foot
•
EV3 Epoxy Tread and V3 Full Body Fill $ 24.40 List Adder per foot
•
ELV3 Luminescent and Epoxy Tread $ 24.40 List Adder per foot
with V3 Full Body Fill
•
FLO Air Flow Conguration $ 3.60 List Adder per foot
(Sweeps, Shoes, and Door Bottoms)
•
LS Light Spring for Door Bottoms
•
PSA Pressure Sensitive Adhesive
(Weather Stripping and Intumescent)
•
SEC Security Screws
•
Z49 Door Bottom End cap System
•
ZAG Anti Ligature (Weather Stripping
and Head and Jamb) $ 1.31 List Adder per foot
FASTENERS:
Supplied at no charge except drive screws & nails. Flathead wood screws
supplied with threshold, expansion shields extra.
FINISH DESIGNATIONS / ABBREVIATIONS:
A = Aluminum, Mill nish B-ORB = Oil Rubbed Bronze nish
AA = 204R1/202R1 Clear Anodized Finish B-POL = High Buff Polished Bronze
B = Architectural Bronze, Mill nish B-SAT = Stain Polished Bronze
D =
2 Step Dark Bronze Anodized (Dark Brown)
SP = Steel Prime
G = 204R1/202R1 Gold Anodized nish STST = Stainless Steel
Model NH - Optional or Standard
15 Standard
48 Standard
49 Standard
63 Optional
64 Optional
65 Optional
68 Standard
69 Standard
70 Optional
73 Optional
76 Optional
80 Optional
84R Optional
102 Standard
103 Standard
104 Standard
105 Standard
106 Standard
107 Standard
164 Optional
168 Standard
175 Optional
232 Standard
233 Standard
234 Standard
235 Standard
236 Standard
237 Standard
238 Standard
259R Standard
265 Optional
267 Optional
268 Standard
269 Standard
304 Optional
469 Standard
522 Optional
523 Optional
524 Optional
525 Optional
526 Optional
544 Optional
545 Optional
546 Standard
547 Standard
548 Standard
560 Optional
561 Optional
563 Optional
564 Optional
565 Optional
566 Optional
568 Optional
600CP Standard
Model NH - Optional or Standard
601CP Standard
622 Optional
623 Optional
624 Optional
625 Optional
626 Optional
627 Optional
628 Optional
643 Optional
647 Standard
653 Optional
654 Optional
655 Optional
656 Standard
657 Standard
663 Standard
664 Optional
672 Standard
673 Standard
674 Standard
675 Standard
676 Standard
678 Standard
1545 Optional
1673 Optional
1674 Optional
1675 Optional
1682 Optional
1684 Optional
1685R Standard
1686R Standard
2361 Standard
2673 Standard
2676 Standard
3672 Standard
3673 Standard
3674 Standard
3675 Standard
3676 Standard
6570 Standard
6575 Standard
6710 Standard
7000 Optional
7332 Optional
7334 Optional
7335 Optional
7336 Optional
7337 Optional
8452 Optional
8655 Optional
8724 Optional
8726 Optional
8729 Optional
9
Price Book 3
Effective August 12, 2017 • Rev. 08/17
CATALOG ITEMS NUMERICAL INDEX
PART
NUMBER
LIST PRICE
PER FOOT
LIST PRICE
PER METER TYPE DESCRIPTION
4B
$ 9.80 $ 32.16 Weather Stripping Bronze Jamb 1 3/4" (44.5) Top Sash
4Z
$ 3.15 $ 10.33 Weather Stripping Zinc Jamb 1 3/4" (44.5) Top Sash
5B
$ 10.69 $ 35.07 Weather Stripping Bronze Jamb 2 1/8" (54.0) Lower Sash
5Z
$ 3.45 $ 11.30 Weather Stripping Zinc Jamb 2 1/8" (54.0) Lower Sash
11A
$ 4.33 $ 14.23 Rain Drip Aluminum Rain Drip
11D
$ 6.00 $ 19.68 Rain Drip Dark Bronze Anodized Rain Drip
11G
$ 6.00 $ 19.68 Rain Drip Gold Anodized Rain Drip
15A
$ 6.17 $ 20.24 Threshold Aluminum Butt Threshold 1.4"(35.6)
15B
$ 35.29 $ 115.78 Threshold Bronze ButtThreshold 1.4"(35.6)
18B
$ 1.71 $ 5.61 Weather Stripping Cushion Bronze 9/16" (14.2)
19B
$ 1.96 $ 6.44 Weather Stripping Cushion Bronze 3/4" (19.1)
19WB
$ 2.01 $ 6.57 Weather Stripping Cushion Bronze 1 1/8" (28.6)
23B
$ 6.69 $ 21.97 Weather Stripping Bronze Sill Hook
25AA
$ 2.48 $ 8.15 Gasketing Clear Anodized Extruded Aluminum Angle
25D
$ 4.71 $ 15.43 Gasketing Dark Bronze Anodized Angle
25G
$ 4.71 $ 15.43 Gasketing Gold Anodized Angle
31AA
$ 7.60 $ 24.94 Gasketing Clear Anodized Bumper Strip / Silicone
31D
$ 10.79 $ 35.42 Gasketing Dark Bronze Anod. Bumper Strip/ Silicone
31G
$ 10.79 $ 35.42 Gasketing Gold Anodized Bumper Strip/ Silicone
32AA
$ 7.60 $ 24.94 Gasketing Clear Anodized Bumper Strip / Brush
32D
$ 10.79 $ 35.42 Gasketing Dark Bronze Anodized Bumper Strip/ Brush
32G
$ 10.79 $ 35.42 Gasketing Gold Anodized Bumper Strip / Brush
32P-BK
$ 1.87 $ 6.14 Replacement Gasket Self Adhesive Pile Brush, Black
32P-GY
$ 1.87 $ 6.14 Replacement Gasket Self Adhesive Pile Brush, Gray
33AA
$ 7.60 $ 24.94 Gasketing Clear Anodized / Silicone Lip
33D
$ 10.79 $ 35.42 Gasketing Dark Bronze Anodized / Silicone Lip
33G
$ 10.79 $ 35.42 Gasketing Gold Anodized / Silicone Lip
34AA
$ 10.50 $ 34.44 Meeting Stile Clear Anodized / Brush / Adjustable
34D
$ 14.73 $ 48.33 Meeting Stile Dark Bronze Anodized / Brush / Adjustable
34G
$ 14.73 $ 48.33 Meeting Stile Gold Anodized / Brush / Adjustable
34P-BK-PSA
$ 4.30 $ 14.10 Replacement Gasket Self Adhesive Pile Brush, Black
34P-GY-PSA
$ 4.30 $ 14.10 Replacement Gasket Self Adhesive Pile Brush, Gray
35AA
$ 10.50 $ 34.44 Meeting Stile Clear Anodized/ Silicone Lip/ Adjustable
35D
$ 14.73 $ 48.33 Meeting Stile Dark Bronze Anod./ Silicone Lip/ Adjustable
35G
$ 14.73 $ 48.33 Meeting Stile Gold Anodized/ Silicone Lip/ Adjustable
36AA
$ 10.34 $ 33.92 Meeting Stile Clear Anodized/ Silicone Lip/ Adjustable
36D
$ 14.73 $ 48.33 Meeting Stile Dark Bronze Anod./ Silicone Lip/ Adjustable
36G
$ 14.73 $ 48.33 Meeting Stile Gold Anodized / Silicone Lip/ Adjustable
38AA
$ 10.34 $ 33.92 Meeting Stile Clear Anodized / Solid Insert
38D
$ 14.73 $ 48.33 Meeting Stile Dark Bronze Anodized / Solid Insert
38G
$ 14.73 $ 48.33 Meeting Stile Gold Anodized / Solid Insert
39A
$ 7.67 $ 25.14 Door Sweep Aluminum / Solid Neoprene 1/2"(12.7)
39D
$ 10.34 $ 33.93 Door Sweep Dark Bronze Anodized/Solid Neoprene
1/2" (12.7)
39N
$ 4.03 $ 13.24 Replacement Gasket 1-3/8" Tall Sweep Seal - Neoprene
39WA
$ 10.50 $ 34.44 Door Sweep Aluminum / Solid Neoprene 1 1/4" (31.8)
39WD
$ 14.06 $ 46.11 Door Sweep Dark Bronze Anodized /Solid Neoprene 1 1/4"
39WN
$ 6.83 $ 22.41 Replacement Gasket 2" Tall Sweep Seal - Neoprene
40AA
$ 17.01 $ 55.80 Meeting Stile Clear Anodized Astragal / Magnet Vinyl
40D
$ 25.39 $ 83.27 Meeting Stile
Dark Bronze Anod. Astragal/ Magnet Vinyl
41AA
$ 15.02 $ 49.28 Meeting Stile Clear Anodized Security Astragal
41D
$ 16.22 $ 53.21 Meeting Stile Dark Bronze Anodized Security Astragal
43SP
$ 14.28 $ 46.86 Meeting Stile Steel Prime Astragal 2 1/4" (57.2)
43STST
$ 29.87 $ 98.00 Meeting Stile Stainless Steel Astragal 2 1/4" (57.2)
44XA
$ 24.42 $ 80.13 Meeting Stile Aluminum 1.470" (37.3) x .375"(9.5)
Lead Lined
44STST
$ 17.88 $ 58.70 Meeting Stile Stainless Steel Astragal 1 1/2" (38.1)
47A
$ 8.72 $ 28.58 Meeting Stile Aluminum shim 1 3/4"(44.5) x 1/8"(3.2)
50A
$ 6.15 $ 20.18 Gasketing Aluminum / Neoprene
50MA
$ 6.94 $ 22.77 Door Sweep Aluminum / Beveled Neoprene
50MN
$ 3.02 $ 9.93 Replacement Gasket 1" Tall Beveled Sweep Seal - Neoprene
51A-90
$ 14.13 $ 46.39 Finger Guard 6.5" W rubber, grey. For doors that open to 90°
51A-180
$ 15.10 $ 49.55 Finger Guard
8.5" W rubber, grey. For doors that open to 180°
51N-5-GY
$ 4.08 $ 13.41 Replacement Gasket 1/16" Flexible Strip - EPDM Rubber
51N-6-GY
$ 8.95 $ 29.37 Replacement Gasket 6" Wide EPDM Gray
51N-8-GY
$ 12.66 $ 41.58 Replacement Gasket 8" Wide EPDM Gray
52A
$ 9.98 $ 32.72 Door Sweep Neoprene in Aluminum Track, 1 7/16"(36.5)
52N
$ 4.99 $ 16.38 Replacement Gasket 1.64" Wide Track Seal - Neoprene
53A
$ 7.59 $ 24.94 Door Sweep Neoprene in Aluminum Track, 3/4"(19.1)
53N
$ 3.94 $ 12.93 Replacement Gasket 1.06 Wide Track Seal - Neoprene
PART
NUMBER
LIST PRICE
PER FOOT
LIST PRICE
PER METER TYPE DESCRIPTION
55AA
$ 20.84 $ 68.37 Meeting Stile Clear Anodized / Solid Insert /Adjustable
Astragal
55D
$ 30.56 $ 100.29 Meeting Stile Dark Bronze Anodized / Solid Insert
Intumescent, Adjustable Surface Astragal
55FS-AA
$ 27.67 $ 90.79 Meeting Stile Clear Anodized / Solid Insert Intumescent,
Adjustable Surface Astragal
55FS-D
$ 34.69 $ 113.81 Meeting Stile Dark Bronze Anodized / Solid Insert
Intumescent, Adjustable Surface Astragal
56AA
$ 20.84 $ 68.37 Meeting Stile Clear Anodized Adjustable Mortised Astragal
56D
$ 30.56 $ 100.29 Meeting Stile Dark Bronze Anodized / Solid Insert
Intumescent, Adjustable Mortised Astragal
56G
$ 30.56 $ 100.29 Meeting Stile Gold Anodized Adjustable Mortised Astragal
56FS-AA
$ 26.41 $ 86.66 Meeting Stile Clear Anodized Intumescent Fire Stop
56FS-D
$ 36.04 $ 118.22 Meeting Stile Dark Bronze Anod. Intumescent Fire Stop
56FS-G
$ 36.04 $ 118.22 Meeting Stile Gold Anodized Intumescent Fire Stop
58FS-AA
$ 10.14 $ 33.25 Gasketing Clear Anodized Intumescent Fire Stop
58FS-D
$ 12.93 $ 42.42 Gasketing Dark Bronze Intumescent Fire Stop
58FS-G
$ 12.93 $ 42.42 Gasketing Gold Anodized Intumescent Fire Stop
59FS-A
$ 16.41 $ 53.84 Gasketing Aluminum / Intumescent / Neoprene
Blade PSA
59N
$ 2.37 $ 7.79 Replacement Gasket Lip Seal for Mortise Aluminuminum Track
63A
$ 8.26 $ 27.12 Threshold AluminumThreshold 3"(76.2) x 1/4"(6.4)
64A
$ 5.94 $ 19.50 Threshold AluminumThreshold 2 1/2" (63.5)
65A
$ 18.05 $ 59.23 Threshold AluminumThreshold / Silicone Stop 5" (127.0)
wide 1/2" (12.7) high
65B
$ 116.08 $ 380.84 Threshold BronzeThreshold / Silicone Stop 5" (127.0)
wide 1/2" (12.7) high
68A
$ 6.17 $ 20.24 Threshold AluminumThreshold Rest 1/2" (12.7)
68B
$ 29.57 $ 97.04 Threshold BronzeThreshold Rest 1/2" (12.7)
69A
$ 5.94 $ 19.50 Threshold Aluminum Plate 1/4"(6.4) x 1 1/8"(28.6)
70B
$ 57.92 $ 190.04 Threshold BronzeThreshold 3" (76.2)
72A
$ 12.16 $ 39.91 Door Sweep Neoprene in Aluminum Track
72N
$ 6.93 $ 22.75 Replacement Gasket 2-5/8" Wide Neoprene Strip
73A
$ 13.81 $ 45.34 Threshold Aluminum 4"(10.6) / Neoprene Stop
76B
$ 85.96 $ 282.04 Threshold Bronze / Water Return option 3 1/2" (88.9)
80B
$ 78.48 $ 257.52 Threshold Bronze 4 1/4" (108.0)
84R
$ 6.32 $ 20.75 Threshold Traction Tread Neoprene
1" (25.4) Wide x 1/4" (6.4) Thick
93
$ 16.63 $ 54.59 Gasketing 3" (76.2) Loop Neoprene
93N
$ 2.37 $ 7.79 Replacement Gasket 3" Wide Bulb Seal-Neoprene
95A
$ 10.43 $ 34.24 Gasketing Aluminum / Neoprene
96P
$ 10.57 $ 34.72 Replacement Gasket 1.125" Nylon Brush
96A
$ 17.93 $ 58.81 Door Sweep Aluminum / Brush
98A
$ 6.78 $ 22.22 Gasketing Aluminum / Brush
98A-PSA
$ 7.21 $ 23.67 Meeting Stile Aluminum / Brush / PSA
98D
$ 10.02 $ 32.85 Gasketing Dark Bronze Anodized / Brush
98D-PSA
$ 10.45 $ 34.28 Meeting Stile Dark Bronze Anodized / Brush / PSA
99A
$ 6.78 $ 22.22 Gasketing Aluminum / Silicone
99D
$ 10.08 $ 33.07 Gasketing Dark Bronze Anodized / Silicone
100A
$ 6.78 $ 22.22 Gasketing Aluminum / Silicone Lip
100D
$ 10.02 $ 32.85 Gasketing Dark Bronze Anodized / Silicone Lip
102A
$ 13.98 $ 45.86 Threshold Aluminum 5 1/2" (139.7) Off SetThreshold
103A
$ 17.05 $ 55.97 Threshold Aluminum 7" (177.8) Off SetThreshold
104A
$ 16.10 $ 52.84 Threshold Aluminum 6" (152.4) Off SetThreshold
105A
$ 15.42 $ 50.58 Threshold Aluminum Bulkhead DoorThreshold 3" (76.2)
105B
$ 63.84 $ 209.47 Threshold Bronze Bulkhead DoorThreshold 1 7/8" (47.6)
106A
$ 11.30 $ 37.04 Threshold Aluminum Bulkhead DoorThreshold 3/4" (19.1)
110A
$ 10.64 $ 34.90 Door Sweep Aluminum Door Shoe / Pile
111A
$ 10.64 $ 34.90 Door Sweep Aluminum Door Shoe / Neoprene
111FS-A
$ 11.55 $ 37.90 Door Sweep Aluminum Door Shoe / Intumescent
117S-BK
$ 1.38 $ 4.52 Weather Stripping Black Silicone Seal / Self Adhesive
118B
$ 2.11 $ 6.92 Weather Stripping Cushion Bronze / Adhesive 9/16" (14.2)
119B
$ 2.66 $ 8.74 Weather Stripping
Cushion Bronze / Adhesive 3/4" (19.1)
119WB
$ 2.97 $ 9.75 Weather Stripping Cushion Bronze / Adhesive 1 1/8"(28.6)
133
$ 8.68 $ 28.48 Meeting Stile Glass Edge Protection 1/2"(12.7) PVC/ Brush
134
$ 8.68 $ 28.48 Meeting Stile Glass Edge Protection 1/2"(12.7)
PVC/ Neoprene
135
$ 5.38 $ 17.62 Meeting Stile Glass Edge Protection 1/2"(12.7) PVC
136
$ 7.46 $ 24.46 Meeting Stile Glass Edge Protection 3/4"(19.1) PVC
137
$ 7.12 $ 23.36 Meeting Stile PVC/ Pile for 1/2" (12.7) Glass Door
137P-BK-PSA
$ 2.33 $ 7.64 Miscellaneous Pile Brush / Black / PSA
137P-GY-PSA
$ 2.33 $ 7.64 Miscellaneous Pile Brush / Gray / PSA
10
Price Book 3
Effective August 12, 2017 • Rev. 08/17
PART
NUMBER
LIST PRICE
PER FOOT
LIST PRICE
PER METER TYPE DESCRIPTION
138
$ 9.26 $ 30.36 Meeting Stile PVC/ Pile for 3/4" (19.1) Glass Door
139A
$ 7.38 $ 24.21 Gasketing Aluminum / Neoprene
139D
$ 9.93 $ 32.59 Gasketing Dark Bronze Anodized / Neoprene
139N
$ 3.34 $ 10.95 Replacement Gasket Neoprene 1 1/4"(31.8) x 3/16"(3.2)
139N-PSA
$ 5.34 $ 17.54 Replacement Gasket Neoprene 1 1/4"(31.8) x 3/16"(3.2) with PSA
140A
$ 9.34 $ 30.62 Gasketing Aluminum / Neoprene
141AA
$ 8.49 $ 27.87 Rain Drip Clear Anodized Extruded Rain Drip
142AA
$ 7.29 $ 23.92 Rain Drip Clear Anodized Extruded Rain Drip
142D
$ 12.29 $ 40.33 Rain Drip Dark Bronze Anodized Rain Drip
142G
$ 12.29 $ 40.33 Rain Drip Gold Anodized Rain Drip
144AA
$ 3.95 $ 12.97 Gasketing Clear Anodized Extruded Hook / Silicone Tube
153A
$ 9.58 $ 31.43 Door Sweep Aluminum / Neoprene
153D
$ 14.45 $ 47.41 Door Sweep Dark Bronze Anodized / Neoprene
153N
$ 4.75 $ 15.58 Replacement Gasket Thin Neoprene - Five Finger Extrusion
154A
$ 10.95 $ 35.90 Door Sweep Aluminum Angle Track / Pile
154D
$ 14.72 $ 48.29 Door Sweep Dark Bronze Anodized Angle Track / Pile
155AA
$ 21.88 $ 71.80 Meeting Stile Clear Anodized / Pile Brush Surface Mounted,
Adjustable Astragal
155D
$ 32.09 $ 105.30 Meeting Stile Dark Bronze Anodized / Pile Brush Surface
Mounted, Adjustable Astragal
156AA
$ 20.84 $ 68.37 Meeting Stile Clear Anodized / Pile Brush,
Mortised, Adjustable
156D
$ 30.56 $ 100.29 Meeting Stile Dark Bronze Anodized / Pile Brush
Mortised, Adjustable Astragal
156G
$ 30.56 $ 100.29 Meeting Stile Gold Anodized / Pile Brush Mortised,
Adjustable Astragal
159FS-A
$ 14.31 $ 46.95 Meeting Stile Aluminum Track Intumescent Fire Stop
164A
$ 14.51 $ 47.63 Threshold Aluminum / Smooth Top
4" (101.6) x 1/2" (12.7)
164B
$ 55.11 $ 180.84 Threshold Bronze / Smooth Top 4" (101.6) x 1/2" (12.7)
164STST
$ 126.54 $ 415.15 Threshold Stainless Steel/ Smooth Top
4"(101.6) x 1/2"(12.7)
168A
$ 10.39 $ 34.10 Threshold AluminumThreshold Rest 3/4" (19.1)
168B
$ 34.44 $ 113.00 Threshold BronzeThreshold Rest 3/4" (19.1)
170AA
$ 22.21 $ 72.86 Gasketing Clear Anodized / Adjustable Sound Seal
170D
$ 29.38 $ 96.39 Gasketing Dark Bronze Anodized / Adjustable Sound Seal
170G
$ 29.38 $ 96.39 Gasketing Gold Anodized / Adjustable Sound Seal
175A
$ 16.56 $ 54.34 Threshold Aluminum / Water Return option 5"(127.0)
175B
$ 102.43 $ 336.11 Threshold Bronze / Water Return option 5"(127.0)
188BIO
$ 1.98 $ 6.50 Weather Stripping Antibacterial Rubber / White / PSA
188FS
$ 3.33 $ 10.92 Weather Stripping Intumescent/ Silicone/ PSA
188S-BK
$ 1.80 $ 5.92 Weather Stripping Silicone / Black / PSA
188S-BR
$ 1.80 $ 5.92 Weather Stripping Silicone / Brown / PSA
188S-CL
$ 1.80 $ 5.92 Weather Stripping Silicone / Clear / PSA
188S-GY
$ 1.80 $ 5.92 Weather Stripping Silicone / Grey / PSA
188S-WH
$ 1.80 $ 5.92 Weather Stripping Silicone / White / PSA
221 - 226
See back cover Fasteners OptionalThreshold Anchors. See back cover for
more information.
232A
$ 26.16 $ 85.83 Threshold Aluminum Ramp 6" (152.4) 1/2"(12.7) to
1"(25.4) Ramp
233A
$ 11.92 $ 39.10 Threshold Aluminum Ramp 3" (76.2)
234A
$ 11.92 $ 39.10 Threshold Aluminum Ramp
3" (76.2) 1/4"(6.4) to 1/2"(12.7) Ramp
235A
$ 11.92 $ 39.10 Threshold Aluminum Ramp
3" (76.2), 0 to 1/4"(6.4) Ramp
236A
$ 15.78 $ 51.81 Threshold Aluminum Ramp 6" (152.4)
237A
$ 17.34 $ 56.89 Threshold Aluminum Ramp 3 1/2" (88.9), 1/4"to 1/2"
238A
$ 17.34 $ 56.89 Threshold Aluminum Ramp 3 1/2" (88.9), 1/4" to 3/4"
253A
$ 5.71 $ 18.74 Door Sweep Aluminum / Neoprene Insert / Mortised
253FS-A
$ 16.87 $ 55.34 Door Sweep Aluminum / Intumescent Fire Stop / Mortised
254A
$ 6.15 $ 20.18 Door Sweep Aluminum Track / Pile Insert / Mortised
254P-GY
$ 4.89 $ 16.07 Replacement Gasket
.875" x 2" wide Poly Pile
255AA
$ 20.46 $ 67.13 Door Sweep Clear Anodized / Adjustable Surface Sweep
with Spring / Pile Insert
255D
$ 29.55 $ 96.98 Door Sweep Dark Bronze Anodized / Adjustable urface
Sweep with Spring / Pile Insert
259R
$ 28.76 $ 94.37 Threshold Rubber ramp 6" (152.4) x 1/2" (12.7)
265A
$ 16.40 $ 53.81 Threshold Aluminum 5" (127.0) / Neoprene Stop
267A
$ 13.24 $ 43.45 Threshold Aluminum 2.155" (54.7) / Neoprene Stop
268A
$ 5.41 $ 17.73 Threshold AluminumThreshold Rest 3/8" (9.5)
268B
$ 26.89 $ 88.21 Threshold BronzeThreshold Rest 3/8" (9.5)
269A
$ 6.61 $ 21.70 Threshold Aluminum Assembly Connector
PART
NUMBER
LIST PRICE
PER FOOT
LIST PRICE
PER METER TYPE DESCRIPTION
270A
$ 9.62 $ 31.55 Gasketing Aluminum Door Stop / Neoprene
272A
$ 9.62 $ 31.55 Gasketing Aluminum Door Stop / Neoprene
302FS-AA
$ 8.90 $ 29.22 Gasketing Clear Anodized/ Neoprene/ Intumet Fire Stop
302FS-B
$ 24.07 $ 79.01 Gasketing Bronze / Neoprene Intumescent Fire Stop
302FS-D
$ 11.75 $ 38.53 Gasketing Dark Bronze Anodized / Neoprene /
302FS-G
$ 11.75 $ 38.53 Gasketing Gold Anodized / Neoprene Intumescent
Fire Stop
304A
$ 6.78 $ 22.23 Threshold Aluminum ButtThreshold1 1/2" (38.1) wide
304D
$ 8.82 $ 28.94 Threshold Dark Bronze Anodized ButtThreshold
1 1/2" (38.1) wide
304G
$ 8.82 $ 28.94 Threshold Gold Anodized ButtThreshold 1 1/2" (38.1)
312A
$ 5.20 $ 17.04 Gasketing Aluminum / Neoprene
312N
$ 1.38 $ 4.53 Replacement Gasket Neoprene, 3/16"(4.7) x 1/2"(12.7)
312N-PSA
$ 1.67 $ 5.48 Gasketing Neoprene with PSA 3/16"(4.7) x 1/2"(12.7)
314AA
$ 8.24 $ 27.06 Gasketing Clear Anodized / Neoprene
314B
$ 20.85 $ 68.44 Gasketing Bronze / Neoprene
314D
$ 9.46 $ 31.01 Gasketing Dark Bronze Anodized / Neoprene
314G
$ 9.46 $ 31.01 Gasketing Gold Anodized / Neoprene
314N
$ 2.18 $ 7.17 Replacement Gasket .75"X.125" Closed Cell Sponge Neoprene -
Rectangular Extrusion
314N-PSA
$ 3.62 $ 11.90 Replacement Gasket .75"X.125" Closed Cell Sponge Neoprene -
Rectangular Extrusion W/PSA
318AA
$ 9.70 $ 31.81 Gasketing Clear Anodized / Neoprene
318D
$ 10.79 $ 35.42 Gasketing Dark Bronze Anodized / Neoprene
318G
$ 10.79 $ 35.42 Gasketing Gold Anodized / Neoprene
318N
$ 3.08 $ 10.11 Gasketing Closed Cell Sponge Neoprene Black
3/8"(9.5) x 3/4"(19.1)
318N-PSA
$ 5.19 $ 17.03 Replacement Gasket Closed Cell Sponge Neoprene Black
3/8"(9.5) x 3/4"(19.1) with PSA
319N
$ 0.28 $ 0.93 Replacement Gasket Noise Block Rubber
320AA
$ 56.42 each 12"-18" (305-457) Clear Anodized / Economical Mortised
Automatic Door Bottom
$ 47.01 each 18 1/8"-36" (460-914)
$ 50.10 each 36 1/8"-48" (917-1219)
$ 62.63 each 48 1/8"-54" (1222-1371)
$ 77.67 each 54 1/8"-60" (1375-1524)
320N
$ 3.86 $ 12.68 Replacement Gasket .406" Wide Split Bulb Seal - Neoprene
321AA
$ 62.39 each 12"-18" (305-457) Clear Anodized / Economical Mortised
Automatic Door Bottom
$ 53.11 each 18 1/8"-36" (460-914)
$ 68.38 each 36 1/8"-48" (917-1219)
$ 85.60 each 48 1/8"-54" (1222-1371)
$ 106.98 each 54 1/8"-60" (1375-1524)
321D
$ 76.40 each 12"-18" (305-457) Dark Bronze Anodized / Economical Mortised
Automatic Door Bottom
$ 63.67 each 18 1/8"-36" (460-914)
$ 88.05 each 36 1/8"-48" (917-1219)
$ 110.03 each 48 1/8"-54" (1222-1371)
$ 137.53 each 54 1/8"-60" (1375-1524)
322A
$ 9.70 $ 31.81 Gasketing
323AA
$ 55.05 each 12"-18" (305-457) Clear Anodized / Mortised,
Automatic Door Bottom
$ 45.88 each 18 1/8"-36" (460-914)
$ 48.89 each 36 1/8"-48" (917-1219)
$ 61.10 each 48 1/8"-54" (1222-1371)
$ 76.35 each 54 1/8"-60" (1375-1524)
326AA
$ 8.89 $ 29.17 Gasketing Clear Anodized / Neoprene
326B
$ 22.71 $ 74.52 Gasketing Bronze / Neoprene
326D
$ 11.98 $ 39.30 Gasketing Dark Bronze Anodized / Neoprene
326G
$ 11.98 $ 39.30 Gasketing Gold Anodized/ Neoprene
326N
$ 4.70 $ 15.45 Replacement Gasket 1.006" Wide Dual Bulb and Lip Seal - Neoprene
328AA
$ 8.60 $ 28.24 Gasketing Clear Anodized/ Neoprene
328B
$ 20.85 $ 68.44 Gasketing Bronze / Neoprene
328D
$ 11.61 $ 38.13 Gasketing Dark Bronze Anodized / Neoprene
328G
$ 11.61 $ 38.13 Gasketing Gold Anodized / Neoprene
328FS-AA
$ 12.69 $ 41.63 Gasketing Clear Anodized / NeopreneIntumescent Fire
Stop
328FS-D
$ 16.81 $ 55.16 Gasketing Dark Bronze Anodized / Neoprene
Intumescent Fire Stop
328FS-G
$ 16.81 $ 55.16 Gasketing Gold Anodized / Neoprene Intumescent Fire
Stop
328N
$ 4.10 $ 13.45 Replacement Gasket 7/8" Wide Neoprene Insert
328SPB
$ 28.95 each General Steel Prime Closer Plate Bracket.
329AA
$ 6.94 $ 22.77 Gasketing Clear Anodized w/ Beveled Neoprene
329B
$ 19.22 $ 63.06 Gasketing Bronze with Beveled Neoprene
329D
$ 10.72 $ 35.16 Gasketing Dark Bronze Anod. / Beveled Neoprene
11
Price Book 3
Effective August 12, 2017 • Rev. 08/17
PART
NUMBER
LIST PRICE
PER FOOT
LIST PRICE
PER METER TYPE DESCRIPTION
329G
$ 10.72 $ 35.16 Gasketing Gold Anodized / Beveled Neoprene
339AA
$ 7.66 $ 25.14 Gasketing Clear Anodized / Neoprene
339B
$ 20.85 $ 68.44 Gasketing Bronze / Neoprene
339D
$ 11.76 $ 38.56 Gasketing Dark Bronze Anodized / Neoprene
339G
$ 11.76 $ 38.56 Gasketing Gold Anodized / Neoprene
339FS-AA
$ 12.69 $ 41.63 Door Sweep Clear Anodized / Neoprene/ Intumet
339FS-D
$ 16.52 $ 54.21 Door Sweep Dark Bronze Anod./Neoprene/ Intumet
339WAA
$ 10.50 $ 34.44 Gasketing Clear Anodized / Neoprene
339WB
$ 21.78 $ 71.48 Gasketing Bronze / Neoprene
339WD
$ 13.99 $ 45.89 Gasketing Dark Bronze Anodized / Neoprene
339WG
$ 13.99 $ 45.89 Gasketing Gold Anodized / Neoprene
350A
$ 73.25 each 12"-18" (305-457) Clear Anodized / Mortised Automatic
Door Bottom
$ 55.38 each 18 1/8"-36" (460-914)
$ 59.00 each 36 1/8"-48" (917-1219)
$ 73.70 each 48 1/8"-54" (1222-1371)
$ 92.21 each 54 1/8"-60" (1375-1524)
350A-LS
$ 78.28 each 12"-18" (305-457) Clear Anodized / Mortised Automatic
Door Bottom / Light Spring - Low Force
$ 62.58 each 18 1/8"-36" (460-914)
$ 66.32 each 36 1/8"-48" (917-1219)
350A-X
$ 136.78 each 12"-18" (305-457) Clear Anodized / Mortised Automatic
Door Bottom / Lead-Lined
$ 108.38 each 18 1/8"-36" (460-914)
$ 126.49 each 36 1/8"-48" (917-1219)
351AA
$ 83.75 each 12"-18" (305-457) Clear Anodized Automatic Door Bottom
$ 67.00 each 18 1/8"-36" (460-914)
$ 80.49 each 36 1/8"-48" (917-1219)
$ 100.66 each 48 1/8"-54" (1222-1371)
$ 125.84 each 54 1/8"-60" (1375-1524)
351AA-LS
$ 72.56 each 18 1/8"-36" (460-914) Clear Anodized Automatic
Door Bottom / Light Spring - Low Force
$ 86.05 each 36 1/8"-48" (917-1219)
$ 90.68 each 12"-18" (305-457)
351AA-X
$ 143.57 each 12"-18" (305-457) Clear Anodized Automatic
Door Bottom, Lead Lined, Regular Duty
$ 111.76 each 18 1/8"-36" (460-914)
$ 131.74 each 36 1/8"-48" (917-1219)
351D
$ 93.67 each 12"-18" (305-457) Dark Bronze Anodized Automatics
Door Bottom
$ 74.91 each 18 1/8"-36" (460-914)
$ 103.53 each 36 1/8"-48" (917-1219)
$ 129.44 each 48 1/8"-54" (1222-1371)
$ 161.81 each 54 1/8"-60" (1375-1524)
351D-LS
$ 100.80 each 12"-18" (305-457) Dark Bronze Anodized Automatic
Door Bottom - Light Spring - Low Force
$ 80.62 each 18 1/8"-36" (460-914)
$ 109.45 each 36 1/8"-48" (917-1219)
351D-X
$ 157.18 each 12"-18" (305-457) Dark Bronze Anodized Automatic
Door Bottom, Lead Lined, Regular Duty
$ 124.48 each 18 1/8"-36" (460-914)
$ 157.18 each 36 1/8"-48" (917-1219)
351S-BK
$ 4.19 $ 13.76 Replacement Gasket .433" Wide Silicone Extrusion
352AA
$ 83.75 each 12"-18" (305-457) Clear Anodized Automatic Door Bottom
$ 67.00 each 18 1/8"-36" (460-914)
$ 80.49 each 36 1/8"-48" (917-1219)
$ 100.66 each 48 1/8"-54" (1222-1371)
$ 125.84 each 54 1/8"-60" (1375-1524)
352AA-LS
$ 72.56 each 12"-18" (305-457) Clear Anodized Automatic Door Bottom /
Light Spring - Low Force
$ 86.05 each 18 1/8"-36" (460-914)
$ 90.68 each 36 1/8"-48" (917-1219)
352AA-X
$ 143.57 each 12"-18" (305-457) Clear Anodized Automatic Door Bottom,
Lead Lined, Regular Duty
$ 111.76 each 18 1/8"-36" (460-914)
$ 131.74 each 36 1/8"-48" (917-1219)
352D
$ 93.67 each 12"-18" (305-457) Dark Bronze Anodized Automatic
Door Bottom
$ 74.91 each 18 1/8"-36" (460-914)
$ 103.53 each 36 1/8"-48" (917-1219)
$ 129.44 each 48 1/8"-54" (1222-1371)
$ 161.81 each 54 1/8"-60" (1375-1524)
352D-LS
$ 100.80 each 12"-18" (305-457) Dark Bronze Anodized Automatic
Door Bottom - Light Spring - Low Force
$ 80.62 each 18 1/8"-36" (460-914)
$ 109.45 each 36 1/8"-48" (917-1219)
352D-X
$ 157.18 each 12"-18" (305-457) Dark Bronze Anodized Automatic
Door Bottom, Lead Lined, Regular Duty
$ 124.48 each 18 1/8"-36" (460-914)
$ 157.18 each 36 1/8"-48" (917-1219)
355A
$ 55.52 each 18 1/8"-36" (460-914) Aluminum / Mortised Automatic
Door Bottom Regular Duty
$ 62.92 each 36 1/8"-48" (917-1219)
$ 77.13 each 48 1/8"-54" (1222-1371)
PART
NUMBER
LIST PRICE
PER FOOT
LIST PRICE
PER METER TYPE DESCRIPTION
360AA
$ 101.02 each 12"-18" (305-457) Clear Anodized / Mortised Automatic
Door Bottom Heavy Duty
$ 80.79 each 18 1/8"-36" (460-914)
$ 91.67 each 36 1/8"-48" (917-1219)
$ 114.65 each 48 1/8"-54" (1222-1371)
$ 147.83 each 54 1/8"-60" (1375-1524)
361AA
$ 118.42 each 12"-18" (305-457) Clear Anodized Automatic Door
Bottom/Heavy Duty
$ 93.46 each 18 1/8"-36" (460-914)
$ 103.62 each 36 1/8"-48" (917-1219)
$ 129.54 each 48 1/8"-54" (1222-1371)
$ 161.94 each 54 1/8"-60" (1375-1524)
361D
$ 157.06 each 12"-18" (305-457) Dark Bronze Anodized Automatic
Door Bottom/Heavy Duty
$ 125.63 each 18 1/8"-36" (460-914)
$ 131.32 each 36 1/8"-48" (917-1219)
$ 164.17 each 48 1/8"-54" (1222-1371)
$ 205.21 each 54 1/8"-60" (1375-1524)
361G
$ 157.06 each 12"-18" (305-457) Gold Anodized Automatic
Door Bottom/Heavy Duty
$ 125.63 each 18 1/8"-36" (460-914)
$ 131.32 each 36 1/8"-48" (917-1219)
$ 164.17 each 48 1/8"-54" (1222-1371)
$ 205.21 each 54 1/8"-60" (1375-1524)
362AA
$ 118.42 each 12"-18" (305-457) Clear Anodized Automatic
Door Bottom/Heavy Duty
$ 93.46 each 18 1/8"-36" (460-914)
$ 103.62 each 36 1/8"-48" (917-1219)
$ 129.54 each 48 1/8"-54" (1222-1371)
$ 161.94 each 54 1/8"-60" (1375-1524)
362D
$ 157.06 each 12"-18" (305-457) Dark Bronze Anodized Automatic
Door Bottom/Heavy Duty
$ 125.63 each 18 1/8"-36" (460-914)
$ 131.32 each 36 1/8"-48" (917-1219)
$ 164.17 each 48 1/8"-54" (1222-1371)
$ 205.21 each 54 1/8"-60" (1375-1524)
362G
$ 157.06 each 12"-18" (305-457) Gold Anodized Automatic
Door Bottom/Heavy Duty
$ 125.63 each 18 1/8"-36" (460-914)
$ 131.32 each 36 1/8"-48" (917-1219)
$ 164.17 each 48 1/8"-54" (1222-1371)
$ 205.21 each 54 1/8"-60" (1375-1524)
363N
$ 4.99 $ 16.38 Replacement Gasket .656" Wide Sponge Neoprene
364AA
$ 103.30 each 12"-18" (305-457) Clear Anodized / Mortised Automatic
Door Bottom/Heavy Duty
$ 82.59 each 18 1/8"-36" (460-914)
$ 93.49 each 36 1/8"-48" (917-1219)
$ 116.91 each 48 1/8"-54" (1222-1371)
$ 146.13 each 54 1/8"-60" (1375-1524)
364FS-AA
$ 117.31 each 18 1/8"-36" (460-914) Clear Anodized / Mortised Automatic
Door Bottom/Heavy Duty/Intumescent
$ 138.62 each 36 1/8"-48" (917-1219)
$ 204.54 each 48 1/8"-54" (1222-1371)
$ 245.25 each 54 1/8"-60" (1375-1524)
364LS-AA
$ 117.58 each 12"-18" (305-457) Clear Anodized/ Mortised Automatic
Door Bottom/ Light Spring -Low Force
$ 94.03 each 18 1/8"-36" (460-914)
$ 105.68 each 36 1/8"-48" (917-1219)
365AA
$ 121.49 each 12"-18" (305-457) Clear Anodized/Automatic
Door Bottom / Heavy Duty
$ 97.16 each 18 1/8"-36" (460-914)
$ 112.88 each 36 1/8"-48" (917-1219)
$ 141.11 each 48 1/8"-54" (1222-1371)
$ 176.37 each 54 1/8"-60" (1375-1524)
365D
$ 161.81 each 12"-18" (305-457) Dark Bronze Anodized/Automatic
Door Bottom / Heavy Duty
$ 129.44 each 18 1/8"-36" (460-914)
$ 131.32 each 36 1/8"-48" (917-1219)
$ 164.17 each 48 1/8"-54" (1222-1371)
$ 205.21 each 54 1/8"-60" (1375-1524)
365EMI
$ 241.70 each 18 1/8"-36" (460-914) Irridated Finish/Automatic
Door Bottom/ Heavy Duty/ For EMI-RFI
$ 305.07 each 36 1/8"-48" (917-1219)
$ 368.45 each 48 1/8"-54" (1222-1371)
365G
$ 161.81 each 12"-18" (305-457) Gold Anodized/Automatic
Door Bottom / Heavy Duty
$ 129.44 each 18 1/8"-36" (460-914)
$ 131.32 each 36 1/8"-48" (917-1219)
$ 164.17 each 48 1/8"-54" (1222-1371)
$ 205.21 each 54 1/8"-60" (1375-1524)
365FS-AA
$ 130.86 each 18 1/8"-36" (460-914) Clear Anodized/Automatic
Door Bottom/Heavy Duty/Intumescent
$ 157.03 each 36 1/8"-48" (917-1219)
$ 233.23 each 48 1/8"-54" (1222-1371)
$ 279.85 each 54 1/8"-60" (1375-1524)
12
Price Book 3
Effective August 12, 2017 • Rev. 08/17
PART
NUMBER
LIST PRICE
PER FOOT
LIST PRICE
PER METER TYPE DESCRIPTION
365FS-D
$ 165.32 each 18 1/8"-36" (460-914) Clear Anodized/Automatic
Door Bottom/Heavy Duty/Intumescent
$ 177.25 each 36 1/8"-48" (917-1219)
$ 264.48 each 48 1/8"-54" (1222-1371)
$ 317.36 each 54 1/8"-60" (1375-1524)
365FS-G
$ 165.32 each 18 1/8"-36" (460-914) Clear Anodized/Automatic
Door Bottom/Heavy Duty/Intumescent
$ 177.25 each 36 1/8"-48" (917-1219)
$ 264.48 each 48 1/8"-54" (1222-1371)
$ 317.36 each 54 1/8"-60" (1375-1524)
365LS-AA
$ 128.34 each 12"-18" (305-457) Clear Anodized/Automatic Door
Bottom/Light Spring-Low Force
$ 102.70 each 18 1/8"-36" (460-914)
$ 118.44 each 36 1/8"-48" (917-1219)
365LS-D
$ 168.93 each 12"-18" (305-457) Dark Bronze Anodized/Automatic
Door Bottom/Light Spring-Low Force
$ 135.15 each 18 1/8"-36" (460-914)
$ 137.07 each 36 1/8"-48" (917-1219)
365N
$ 5.43 $ 17.82 Replacement Gasket .735" Wide Bulb Seal - Neoprene
365LS-G
$ 168.93 each 12"-18" (305-457) Gold Anodized/Automatic Door
Bottom/Light Spring-Low Force
$ 135.15 each 18 1/8"-36" (460-914)
$ 137.07 each 36 1/8"-48" (917-1219)
365Y
$ 1.04 $ 3.41 Replacement Gasket Anti-Squeak Rubber for ABD
366AA
$ 121.49 each 12"-18" (305-457) Clear Anodized/Automatic
Door Bottom / Heavy Duty
$ 97.16 each 18 1/8"-36" (460-914)
$ 112.88 each 36 1/8"-48" (917-1219)
$ 141.11 each 48 1/8"-54" (1222-1371)
$ 176.37 each 54 1/8"-60" (1375-1524)
366D
$ 161.81 each 12"-18" (305-457) Dark Bronze Anodized/Automatic
Door Bottom / Heavy Duty
$ 129.44 each 18 1/8"-36" (460-914)
$ 131.32 each 36 1/8"-48" (917-1219)
$ 164.17 each 48 1/8"-54" (1222-1371)
$ 205.21 each 54 1/8"-60" (1375-1524)
366G
$ 161.81 each 12"-18" (305-457) Gold Anodized/Automatic
Door Bottom / Heavy Duty
$ 129.44 each 18 1/8"-36" (460-914)
$ 131.32 each 36 1/8"-48" (917-1219)
$ 164.17 each 48 1/8"-54" (1222-1371)
$ 205.21 each 54 1/8"-60" (1375-1524)
366FS-AA
$ 130.86 each 18 1/8"-36" (460-914) Anodized/Automatic
Door Bottom/Heavy Duty/Intumescent
$ 157.03 each 36 1/8"-48" (917-1219)
$ 233.23 each 48 1/8"-54" (1222-1371)
$ 279.85 each 54 1/8"-60" (1375-1524)
366FS-D
$ 165.32 each 18 1/8"-36" (460-914) Dark Bronze Anodized/Automatic
Door Bottom/Heavy Duty/Intumescent
$ 177.25 each 36 1/8"-48" (917-1219)
$ 264.48 each 48 1/8"-54" (1222-1371)
$ 317.36 each 54 1/8"-60" (1375-1524)
366FS-G
$ 165.32 each 18 1/8"-36" (460-914) Gold Anodized/Automatic
Door Bottom/Heavy Duty/Intumescent
$ 177.25 each 36 1/8"-48" (917-1219)
$ 264.48 each 48 1/8"-54" (1222-1371)
$ 317.36 each 54 1/8"-60" (1375-1524)
366LS-AA
$ 128.34 each 12"-18" (305-457) Clear Anodized/Automatic Door
Bottom/Light Spring-Low Force
$ 102.70 each 18 1/8"-36" (460-914)
$ 118.44 each 36 1/8"-48" (917-1219)
366LS-D
$ 168.93 each 12"-18" (305-457) Dark Bronze Anodized/Automatic
Door Bottom/Light Spring-Low Force
$ 135.15 each 18 1/8"-36" (460-914)
$ 137.07 each 36 1/8"-48" (917-1219)
366LS-G
$ 168.93 each 12"-18" (305-457) Gold Anodized/Automatic Door
Bottom/Light Spring-Low Force
$ 135.15 each 18 1/8"-36" (460-914)
$ 137.07 each 36 1/8"-48" (917-1219)
367AA
$ 158.80 each 12"-18" (305-457) Clear Anodized/Automatic Door Bottom/
Heavy Duty/Acoustic Sound Reduction
$ 122.14 each 18 1/8"-36" (460-914)
$ 140.45 each 36 1/8"-48" (917-1219)
367D
$ 182.12 each 12"-18" (305-457) Dark Bronze Anodized/Automatic
Door Bottom/Heavy Duty/Acoustic
Sound Reduction
$ 144.47 each 18 1/8"-36" (460-914)
$ 166.18 each 36 1/8"-48" (917-1219)
367G
$ 182.12 each 12"-18" (305-457) Gold Anodized/Automatic Door
Bottom/Heavy Duty/Acoustic
Sound Reduction
$ 144.47 each 18 1/8"-36" (460-914)
$ 166.18 each 36 1/8"-48" (917-1219)
367N
$ 4.27 $ 14.03 Replacement Gasket Double Wrap ADB Seal - Neoprene
368AA
$ 158.80 each 12"-18" (305-457) Clear Anodized/Automatic Door
Bottom/Heavy Duty/Acoustic
Sound Reduction
$ 122.14 each 18 1/8"-36" (460-914)
$ 140.45 each 36 1/8"-48" (917-1219)
368D
$ 182.12 each 12"-18" (305-457) Dark Bronze Anodized/Automatic Door
Bottom/Heavy Duty/Acoustic Sound
Reduction
$ 144.47 each 18 1/8"-36" (460-914)
$ 166.18 each 36 1/8"-48" (917-1219)
PART
NUMBER
LIST PRICE
PER FOOT
LIST PRICE
PER METER TYPE DESCRIPTION
368G
$ 182.12 each 12"-18" (305-457) Gold Anodized/Automatic Door
Bottom/Heavy Duty/Acoustic
Sound Reduction
$ 144.47 each 18 1/8"-36" (460-914)
$ 166.18 each 36 1/8"-48" (917-1219)
369AA
$ 139.29 each 12"-18" (305-457) Clear Anodized/Mortised Automatic
Door Bottom/Heavy Duty/Acoustic
Sound Reduction
$ 104.74 each 18 1/8"-36" (460-914)
$ 120.43 each 36 1/8"-48" (917-1219)
370A
$ 16.21 $ 53.18 Gasketing Aluminum / Magnetic Seal
370D
$ 24.90 $ 81.70 Gasketing Dark Bronze Anodized / Magnetic Seal
375AA
$ 17.66 $ 57.93 Gasketing Clear Anodized/ Magnetic/ Snap-On Cover
375D
$ 23.61 $ 77.47 Gasketing Dk Bronze Anod./ Magnetic/ Snap-On Cover
376AA
$ 11.87 $ 38.92 Gasketing Clear Anodized / Neoprene / Snap-On Cover
376D
$ 15.85 $ 51.99 Gasketing Dk Bronze Anod./ Neoprene/Snap-On Cover
381A
$ 7.88 $ 25.87 Gasketing Aluminum / Double Neoprene Lip
383AA
$ 10.71 $ 35.12 Meeting Stiles Clear Anodized / Double Neoprene
383D
$ 12.21 $ 40.04 Meeting Stiles Dark Bronze Anodized / Double Neoprene
383FS-AA
$ 15.84 $ 51.98 Meeting Stiles Clear Anodized / Neoprene / Intumescent
383FS-D
$ 21.45 $ 70.38 Meeting Stiles Dark Brown Anod./ Neoprene/ Intumescent
383N
$ 2.36 $ 7.76 Replacement Gasket .687" Tall Tapered Lip Seal - Neoprene
398V
$ 6.63 $ 21.77 Meeting Stiles Solid PVC Brown / Pile with Fin Seal / PSA
399V
$ 6.63 $ 21.77 Meeting Stiles Solid PVC Brown / Silicone lips/ PSA
400B
$ 11.19 $ 36.73 Weather Stripping Bronze Side Jamb without Return Flange
1 3/4" (44.5)
400Z
$ 3.01 $ 9.87 Weather Stripping Zinc Side Jamb without Return Flange
1 3/4" (44.5)
426A
$ 10.34 $ 33.92 Gasketing Aluminum/Neoprene
428A
$ 10.34 $ 33.92 Gasketing Aluminum / Neoprene for Door Closers
429AA
$ 10.43 $ 34.24 Gasketing Clear Anodized with Silicone Gasket for use
with Coordinator or Closer Bracket
452A
$ 10.50 $ 34.44 Door Sweep Aluminum Track / Neoprene
469A
$ 5.27 $ 17.28 Threshold Aluminum Assembly Connector
470AA
$ 16.28 $ 53.40 Gasketing Clear Anodized Security Seal/ Neoprene
470D
$ 21.36 $ 70.06 Gasketing Dark Bronze Anod. Security Seal/ Neoprene
472AA
$ 20.14 $ 66.08 Gasketing Clear Anodized Security Seal / Neoprene
475AA
$ 8.53 $ 27.99 Gasketing Clear Anodized / Snap-On Cover /
Neoprene Seal
475D
$ 12.51 $ 41.05 Gasketing Dark Bronze Anodized / Snap-On Cover /
Neoprene Seal
475G
$ 12.51 $ 41.05 Gasketing Gold Anodized / Snap-On Cover /Neoprene
Seal
477AA
$ 8.24 $ 27.06 Door Sweep Clear Anodized/ Neoprene/ Snap-On Cover
477D
$ 11.76 $ 38.56 Door Sweep Dark Bronze Anodized / Neoprene /
Snap on Cover
477G
$ 11.76 $ 38.56 Door Sweep Gold Anodized/ Snap-On Cover/ Neoprene
478AA
$ 12.01 $ 39.40 Gasketing Clear Anodized / Snap-On Cover /
Double Neoprene
478D
$ 16.07 $ 52.74 Gasketing Dark Bronze Anodized / Snap-On Cover /
Double Neoprene
485A
$ 5.78 $ 18.96 Gasketing Aluminum / Neoprene
485D
$ 8.86 $ 29.05 Gasketing Dark Bronze Anodized / Neoprene
485G
$ 8.86 $ 29.05 Gasketing Gold Anodized / Neoprene
486N
$ 3.43 $ 11.28 Replacement Gasket .36" Wide Dual Lip and Bulb .176" Wide
Base-Neoprene
488BIO
$ 1.51 $ 4.97 Weather Stripping Antibacterial Rubber / White / PSA
488FS
$ 2.89 $ 9.50 Weather Stripping Intumescent / Silicone / PSA
488S-BK
$ 1.38 $ 4.52 Weather Stripping Silicone Seal with PSA, black color
488S-BR
$ 1.38 $ 4.52 Weather Stripping Silicone Seal with PSA, brown color
488S-CL
$ 1.38 $ 4.52 Weather Stripping Silicone Seal with PSA, clear
488S-GY
$ 1.38 $ 4.52 Weather Stripping Silicone Seal with PSA, gray color
488S-WH
$ 1.38 $ 4.52 Weather Stripping Silicone Seal with PSA, white color
500B
$ 12.26 $ 40.21 Weather Stripping Bronze Side Jamb without Return Flange
2 1/8"(53.1)
500Z
$ 3.94 $ 12.94 Weather Stripping Zinc Side Jamb without Return Flange
2 1/8"(53.1)
511A
$ 11.20 $ 36.76 Door Sweep Aluminum / Rubber 1/16"(1.6) thick
520A
$ 10.23 $ 33.58 Gasketing Aluminum / Double Neoprene
521FS A
$ 22.07 $ 72.39 Door Sweep Aluminum/ Intumescent/ Flame Retardant
Silicone,for undercut doors
521S-BK
$ 5.74 $ 18.86 Replacement Gasket 1.938" Tall Rectangular Seal - Silicone
522A
$ 7.01 $ 22.98 Threshold AluminumThreshold 1/2" (12.7) High
523A
$ 15.35 $ 50.36 Threshold Aluminum ButtThreshold 3" (76.2)
524A
$ 17.59 $ 57.73 Threshold Aluminum ButtThreshold 3"(76.2)/ Neoprene
525A
$ 25.58 $ 83.92 Threshold Aluminum Thermal BreakThreshold
5" (127.0) / Neoprene
13
Price Book 3
Effective August 12, 2017 • Rev. 08/17
PART
NUMBER
LIST PRICE
PER FOOT
LIST PRICE
PER METER TYPE DESCRIPTION
526A
$ 28.13 $ 92.31 Threshold Aluminum Thermal BreakThreshold
6" (152.4) / Neoprene
539AA
$ 9.48 $ 31.09 Gasketing Clear Anodized / Solid Neoprene
539D
$ 14.23 $ 46.67 Gasketing Dark Bronze Anodized / Solid Neoprene
539N
$ 2.37 $ 7.79 Replacement Gasket 1.56" Tall Sweep Seal - Neoprene
544A
$ 10.23 $ 33.56 Threshold Aluminum HandicapThreshold 4"(101.6)
545A
$ 12.25 $ 40.18 Threshold Aluminum HandicapThreshold 5"(127.0)
545B
$ 50.38 $ 165.30 Threshold Bronze HandicapThreshold 5"(127.0)
545D
$ 24.19 $ 79.38 Threshold Dark Bronze Anodized Handicap
Threshold 5"(127.0)
546A
$ 15.80 $ 51.82 Threshold Aluminum HandicapThreshold 6"(152.4)
547A
$ 18.51 $ 60.73 Threshold Aluminum HandicapThreshold 7"(177.8)
548A
$ 23.78 $ 78.01 Threshold Aluminum HandicapThreshold 8"(203.2)
555AA
$ 20.84 $ 68.37 Meeting Stile Clear Anodized / Silicone InsertAdjustable
Surface Astragal
555D
$ 30.56 $ 100.29 Meeting Stile Dark Bronze Anodized / Silicone Insert
Adjustable Surface Astragal
555FS-AA
$ 27.67 $ 90.79 Meeting Stile Clear Anodized/ Silicone/ Intumescent
Adjustable Surface Astragal
555FS-D
$ 33.78 $ 110.83 Meeting Stile Dark Bronze Anodized / Silicone Insert /
Intumescent/ Adjustable Surface Astragal
557AA
$ 20.84 $ 68.37 Meeting Stile Clear Anodized / Silicone Insert /Adjustable
Mortised Astragal
557D
$ 30.09 $ 98.75 Meeting Stile Dark Bronze Anodized / Silicone Insert /
Adjustable Mortised Astragal
557G
$ 30.09 $ 98.75 Meeting Stile Gold Anodized / Silicone Insert /Adjustable
Mortised Astragal
557FS-AA
$ 26.41 $ 86.66 Meeting Stile Clear Anodized / Intumescent / Silicone
Adjustable Mortised Astragal
557FS-D
$ 36.04 $ 118.22 Meeting Stile Dark Bronze Anodized / Intumescent /Silicone
/ Adjustable Mortised Astragal
557FS-G
$ 36.04 $ 118.22 Meeting Stile Gold Anodized / Intumescent /
SiliconeAdjustable Mortised Astragal
560A
$ 18.05 $ 59.23 Threshold Aluminum RabbetedThreshold/ Neoprene
5"(127.0) wide 7/8"(22.2) high
561A
$ 19.32 $ 63.38 Threshold Aluminum RabbetedThreshold/ Neoprene
4 1/2"(114.3) wide 1" (25.4) high
563A
$ 14.36 $ 47.10 Threshold Aluminum RabbetedThreshold/ Neoprene
3 9/16"(90.4) wide 7/8"(22.2) high
564A
$ 10.45 $ 34.32 Threshold Aluminum RabbetedThreshold/ Neoprene
3 11/16"(84.9) wide 1/2"(12.7) high
564B
$ 57.61 $ 188.99 Threshold Bronze RabbetedThreshold / Neoprene
3 11/16"(84.9) wide 1/2"(12.7) high
564D
$ 20.92 $ 68.63 Threshold Dark Bronze Anodized / Neoprene 3
11/16"(84.9) wide 1/2"(12.7) high
565A
$ 23.47 $ 77.01 Threshold Aluminum RabbetedThreshold
4 7/8" (123.8) / Neoprene Stop 7/8" (22.2)
565B
$ 136.82 $ 448.91 Threshold Bronze RabbetedThreshold
4 7/8" (123.8) / Neoprene Stop 7/8" (22.2)
566A
$ 14.68 $ 48.16 Threshold Aluminum RabettedThreshold
5"(12.7) Neoprene Stop 1/2" (12.7)
566B
$ 60.25 $ 197.69 Threshold Bronze 1/2" (12.7) High Neoprene Stop
1/2" (12.7)
568A
$ 16.85 $ 55.26 Threshold Aluminum 1/2" (12.7) High RabbetedThreshold
6" (152.4) Wide
570AA
$ 13.17 $ 43.22 Gasketing Clear Anodized / Self-Adjusting /Silicone
570S-BK
$ 2.40 $ 7.90 Replacement Gasket .328" Semi-circular Bulb Kerf Seal -
Silicone - Black
571AA
$ 13.17 $ 43.22 Meeting Stile Clear Anodized/ Self Adjusting/Neoprene Lip
572N
$ 4.10 $ 13.45 Replacement Gasket .36" Wide Lip and Bulb Seal - Neoprene
600CP
$ 4.77 /inch /ft. Threshold Aluminum Cover Plate Wide max.
48"(1219.2) x 1/8"(3.2) thick -
Submit template with Order
601CP
$ 8.96 /inch /ft. Threshold Aluminum Cover Plate Wide max.
48"(1219.2) x 1/8"(3.2) thick - Submit
template with order
622A
$ 7.01 $ 22.98 Threshold Aluminum ButtThreshold 2" (50.8)
622PVC
$ 2.52 $ 8.27 Replacement Gasket .45' x .49" Thermal Break Connector - PVC
623A
$ 9.94 $ 32.60 Threshold Aluminum ButtThreshold 3" (76.2)
624A
$ 15.50 $ 50.86 Threshold Aluminum / Thermal Break / 4" (101.6)
625A
$ 18.43 $ 60.47 Threshold Aluminum / Thermal Break / 5" (127.0)
626A
$ 20.98 $ 68.84 Threshold Aluminum / Thermal Break / 6" (152.4)
627A
$ 8.66 $ 28.41 Threshold Aluminum / Neoprene / 2" (50.8) wide
628A
$ 11.52 $ 37.80 Threshold Aluminum / Neoprene / 3" (76.2) wide
639WA
$ 13.52 $ 44.35 Door Sweep Aluminum / Solid Neoprene
PART
NUMBER
LIST PRICE
PER FOOT
LIST PRICE
PER METER TYPE DESCRIPTION
639WD
$ 18.35 $ 60.19 Door Sweep Dark Bronze Anodized / Solid Neoprene
639WN
$ 9.73 $ 31.96 Replacement Gasket 4" Tall Lip Seal - Neoprene
643A
$ 11.75 $ 38.54 Threshold Aluminum / Carpet Divider / 3"(76.2) wide
653A
$ 11.27 $ 37.00 Threshold AluminumThreshold 3" (76.2) wide
654A
$ 14.45 $ 47.41 Threshold AluminumThreshold 4" (101.6) wide
654B
$ 66.10 $ 216.87 Threshold BronzeThreshold 4" (101.6) wide
655A
$ 17.30 $ 56.76 Threshold AluminumThreshold 5" (127.0) wide
655B
$ 91.05 $ 298.73 Threshold BronzeThreshold 5" (127.0) wide
656A
$ 20.47 $ 67.17 Threshold AluminumThreshold 6" (152.4) wide
656B
$ 118.64 $ 389.26 Threshold BronzeThreshold 6" (152.4) wide
657A
$ 29.35 $ 96.28 Threshold AluminumThreshold 7" (177.8) wide
657B
$ 180.76 $ 593.07 Threshold BronzeThreshold 7" (177.8) wide
663A
$ 9.18 $ 30.12 Threshold Aluminum Plate 3" (76.2) wide
669DP-A
Custom Product submit
template to Eng.
Specials
Threshold Aluminum Custom Fabricated Bulkhead
669DP-S
Custom Product submit
template to Eng.
Specials
Threshold Steel Custom Fabricated Bulkhead
669DP-STST
Custom Product submit
template to Eng.
Specials
Threshold Stainless Steel Custom Fabricated
672A
$ 8.57 $ 28.14 Threshold Aluminum Plate 2" (50.8) wide
672B
$ 54.57 $ 179.04 Threshold Bronze Plate 2" (50.8) wide
673A
$ 12.49 $ 40.97 Threshold Aluminum Plate 3" (76.2) wide
673B
$ 65.44 $ 214.73 Threshold Bronze Plate 3" (76.2) wide
674A
$ 16.92 $ 55.53 Threshold Aluminum Plate 4" (101.6) wide
674B
$ 91.65 $ 300.69 Threshold Bronze Plate 4" (101.6) wide
675A
$ 20.15 $ 66.12 Threshold Aluminum Plate 5" (127.0) wide
676A
$ 24.37 $ 79.96 Threshold Aluminum Plate 6" (152.4) wide
676B
$ 178.76 $ 586.52 Threshold Bronze Plate 6" (152.4) wide
678A
$ 33.70 $ 110.57 Threshold Aluminum Plate 8" (203.2) wide
712AA
$ 20.84 $ 68.37 Gasketing Clear Anodized / Adjustable /Spring Loaded /
Silicone Insert
712D
$
30.56
$
100.29
Gasketing Dark Bronze Anodized / Adjustable /Spring
Loaded / Silicone Insert
770D
$
34.23
$
112.32
Gasketing Dark Bronze Anodized / Adjustable Sound
Seal/ Neoprene
770EMI
$
75.69
$
248.35
Gasketing Irridate Finish Adjustable Head and Jamb
770FS-AA
$ 40.91 $ 134.22 Gasketing Clear Anodized / Intumescent Fire Stop
Neoprene
770FS-D
$ 47.81 $ 156.89 Gasketing Dark Bronze Anodized / Intumescent Fire
Stop/Neoprene
770FS-G
$ 47.81 $ 156.89 Gasketing Gold Anodized / Intumescent Fire Stop /
Neoprene
770SP
$ 38.68 $ 126.89 Gasketing Steel Primed Adjustable Sound Seal for Cased
Opening Fire Rated
770SPB
$ 36.04 each General Strike Plate Bracket Steel Prime.
770STST
$ 72.90 $ 239.18 Gasketing Stainless Steel Adjustable Sound Seal
810
$ 2.71 $ 8.88 Weather Stripping Closed Cell Neoprene/ Bumper Type/ PSA
.625"(15.9) x .625"(15.9)
811
$ 4.05 $ 13.28 Weather Stripping Closed Cell Neoprene/ Bumper Type/ PSA
.750"(19.1) x .625"(15.9)
812
$ 4.71 $ 15.48 Weather Stripping Closed Cell Neoprene/ Bumper Type/ PSA
1.00"(25.4) x .500"(12.7)
813
$ 5.73 $ 18.80 Weather Stripping Closed Cell Neoprene/ Bumper Type/ PSA
1.250"(31.8) x .625"(15.9)
824N
$ 1.27 $ 4.19 Weather Stripping Neoprene Seal with PSA
826N
$ 1.05 $ 3.44 Weather Stripping Closed Cell Neoprene Seal with PSA
870AA
$ 17.08 $ 56.02 Gasketing Clear Anodized / Silicone / Adjustable
870D
$ 25.54 $ 83.79 Gasketing Dark Bronze Anodized / Silicone /Adjustable
870SPB
$ 34.40 each General Strike Plate Bracket Steel Prime 6"(152) wide.
870S-BK
$ 5.41 $ 17.76 Replacement Gasket .361" Wide Silicone Bulb Seal
871AA
$ 17.08 $ 56.02 Meeting Stile Clear Anodized / Pile Brush / Adjustable
871D
$ 25.54 $ 83.79 Meeting Stile Dark Bronze Anodized / Pile Brush / Adjustable
873AA
$ 17.08 $ 56.02 Meeting Stile Clear Anodized / Neoprene Lip / Adjustable
905A
$ 7.88 $ 25.87 Gasketing Aluminum Astragal
926N
$ 1.75 $ 6.90 Gasketing .375"(9.5) x .185"(4.7) Closed Cell Sponge
Neoprene w/PSA - 50 Ft.(15.24M)/Roll, 1 roll
minimum UOM purchase
951
$ 11.52 $ 37.81 Finger Guard Cover for mortise type hinge.
971AA-BIO
$ 15.11 $ 49.57 Finger Guard BioWall Antibacterial rubber, white
972AA-BIO
$ 12.82 $ 42.05 Finger Guard BioWall Antibacterial rubber, white
14
Price Book 3
Effective August 12, 2017 • Rev. 08/17
PART
NUMBER
LIST PRICE
PER FOOT
LIST PRICE
PER METER TYPE DESCRIPTION
973AA-BIO
$ 17.79 $ 58.33 Finger Guard BioWall Antibacterial rubber, white
974AA-BIO
$ 14.79 $ 48.52 Finger Guard BioWall Antibacterial rubber, white
1370A
$ 10.04 $ 32.95 Gasketing Aluminum with Neoprene
1370D
$ 13.43 $ 44.06 Gasketing Dark Bronze Anodized / Neoprene
1370N
$ 2.37 $ 7.79 Replacement Gasket .5" Wide-Five Finger Sponge Neoprene -
Extrusion
1545A
$ 7.74 $ 25.41 Threshold Aluminum ButtThreshold 2 1/2" (63.5)
1545B
$ 46.09 $ 151.22 Threshold Bronze ButtThreshold 2 1/2" (63.5)
1545D
$ 24.20 $ 79.40 Threshold Dark Bronze AnodizedThreshold 2 1/2"(63.5)
1673A
$ 14.45 $ 47.41 Threshold Aluminum ButtThreshold
3" (76.2) Wide x 1/2" (12.7) High
1674A
$ 20.39 $ 66.90 Threshold AluminumThreshold One Side Beveled
4"(101.6) x 1/2"(12.7) High
1674B
$ 109.36 $ 358.82 Threshold BronzeThreshold One Side Beveled
4"(101.6) x 1/2"(12.7) High
1675A
$ 23.53 $ 77.23 Threshold AluminumThreshold One Side Beveled
5"(127.0) x 1/2"(12.7) High
1682A
$ 7.21 $ 23.69 Threshold Carpet DividerThreshold 1 3/4" (44.5)
1682B
$ 40.17 $ 131.78 Threshold Bronze Carpet Divider1 3/4"(44.5) x 1/2"(12.7)
1684A
$ 16.09 $ 52.79 Threshold Aluminum Carpet Divider 4"(101.6)
1685R
$ 23.79 $ 78.05 Threshold Rubber Carpet DividerThreshold 2.5"(63.5)
1686R
$ 23.79 $ 78.05 Threshold Rubber Carpet DividerThreshold 1.813"(46.1)
1840AA
$ 11.09 $ 36.39 Meeting Stile Clear Anodized Interior Astragal - Neoprene
1840D
$ 15.01 $ 49.25 Meeting Stile Dark Bronze Interior Astragal - Neoprene
2070A-10
$ 76.13 $ 249.78 Flood Barrier Flood Barrier Shield 10" high, inside mount
2070A-20
$ 137.03 $ 449.61 Flood Barrier Flood Barrier Shield 20" high, inside mount
2070A-24
$ 170.20 $ 558.45 Flood Barrier Flood Barrier Shield 24" high, inside mount
2070A-30
$ 209.53 $ 687.49 Flood Barrier Flood Barrier Shield 30" high, inside mount
2070A-36
$ 251.44 $ 824.96 Flood Barrier Flood Barrier Shield 36" high, inside mount
2070A-42
$ 285.12 $ 935.45 Flood Barrier Flood Barrier Shield 42" high, inside mount
2070N
$ 3.56 $ 11.69 Replacement Gasket .25""X.625" Closed Cell Sponge Neoprene -
U Shape Extrusion
2071A-10
$ 76.13 $ 249.78 Flood Barrier Flood Barrier Shield 10" high, outside mount
2071A-20
$ 137.03 $ 449.61 Flood Barrier Flood Barrier Shield 20" high, outside mount
2071A-24
$ 170.20 $ 558.45 Flood Barrier Flood Barrier Shield 24" high, outside mount
2071A-30
$ 209.53 $ 687.49 Flood Barrier Flood Barrier Shield 30" high, outside mount
2071A-36
$ 251.44 $ 824.96 Flood Barrier Flood Barrier Shield 36" high, outside mount
2071A-42
$ 285.12 $ 935.45 Flood Barrier Flood Barrier Shield 42" high, outside mount
2361AA
$ 12.85 $ 42.18 Threshold Clear Anodized Ramp
3.94"(100.1) x .500"(12.7)
2673A
$ 24.96 $ 81.90 Threshold Aluminum 3"(76.2) Traction Tread
Nosing-Rubber
2673A-E
$ 50.79 $ 166.63 Threshold Aluminum 3"(76.2) Traction Tread
Nosing-Epoxy
2673A-EL
$ 66.49 $ 218.18 Threshold Aluminum 3"(76.2) Traction Tread
Nosing - Epoxy / Photoluminescent insert
2673B
$ 102.57 $ 336.51 Threshold Bronze 3"(76.2) Traction Tread
Nosing - Rubber
2673B-E
$ 131.01 $ 429.86 Threshold Bronze 3"(76.2) Traction Tread Nosing - Epoxy
2676A
$ 47.04 $ 154.32 Threshold Aluminum 6"(152.4) Traction Tread
Nosing-Rubber
2676A-E
$ 99.71 $ 327.15 Threshold Aluminum 6"(152.4) Traction Tread
Nosing-Epoxy
2676A-EL
$ 128.93 $ 423.04 Threshold Aluminum 6"(152.4) Traction Tread
Nosing Epoxy / Photoluminescent insert
3056FS-AA
$ 38.21 $ 125.39 Meeting Stile Clear Anodized / Mortised Adjustable Astragal
/Neoprene / Intumescent Fire Stop
3056FS-D
$ 45.89 $ 150.57 Meeting Stile Dark Bronze Anodized / Mortised Adjustable
/Neoprene / Intumescent Fire Stop
3056FS-G
$ 45.89 $ 150.57 Meeting Stile Gold Anodized / Mortised Adjustable Astragal
/Neoprene / Intumescent Fire Stop
3150N
$ 2.16 $ 7.10 Replacement Gasket .27"X.071" Self Extinguishing T Shape Closed
Cell Neoprene-Extrusion
3365EMI
$ 5.43 $ 17.82 Replacement Gasket .735" Wide Bulb Seal - Conductive Neoprene
3365N
$ 5.42 $ 17.79 Replacement Gasket 5/8" Wide Bottom Seal
3544
$ 7.50 $ 24.60 Door Sweep Aluminum / Mortised / Brush
3546
$ 7.50 $ 24.60 Door Sweep Aluminum / Mortised / Neoprene -
FLO option available
3551
$ 55.52 each 18 1/8"-36" (460-914) Aluminum / Mortised Automatic Door Bottom
Regular Duty
$ 62.92 each 36 1/8"-48" (917-1219)
$ 77.13 each 48 1/8"-54" (1222-1371)
PART
NUMBER
LIST PRICE
PER FOOT
LIST PRICE
PER METER TYPE DESCRIPTION
3552
$ 58.72 each 18 1/8"-36" (460-914) Aluminum/ Mortised/ Regular Duty/
BrushAutomatic Door Bottom / Regular Duty
$ 66.54 each 36 1/8"-48" (917-1219)
$ 81.57 each 48 1/8"-54" (1222-1371)
3557FS-AA
$ 38.21 $ 125.39 Meeting Stile Clear Anodized/ Mortised Adjustable
Astragal/Silicone / Intumescent Fire Stop
3557FS-G
$ 45.89 $ 150.57 Meeting Stile Gold Anodized / Mortised Adjustable Astragal
/Silicone / Intumescent Fire Stop
3672A
$ 15.13 $ 49.62 Threshold Aluminum 2"(50.8) Traction Tread
Plate/ Rubber
3672A-E
$ 33.26 $ 109.12 Threshold Aluminum 2"(50.8) Traction Tread
Plate/ Epoxy
3672A-EL
$ 43.14 $ 141.52 Threshold Aluminum 2"(50.8) Traction Tread
Plate / Epoxy/ Photoluminescent Tread insert
3673A
$ 22.42 $ 73.57 Threshold Aluminum 3"(76.2) Traction Tread
Plate / Rubber insert
3673A-E
$ 48.79 $ 160.08 Threshold Aluminum 3"(76.2) Traction Tread
Plate / Epoxy insert
3673A-EL
$ 63.69 $ 208.97 Threshold Aluminum 3"(76.2) Traction Tread
Plate /Epoxy / Photoluminescent Tread insert
3674A
$ 30.00 $ 98.44 Threshold Aluminum 4"(101.6) Traction Tread
Plate / Rubber insert
3674A-E
$ 65.05 $ 213.44 Threshold Aluminum 4"(101.6) Traction Tread
Plate /Epoxy insert
3674A-EL
$ 84.89 $ 278.54 Threshold Aluminum 4"(101.6) Traction Tread
Plate /Epoxy / Photoluminescent Tread insert
3675A
$ 36.71 $ 120.45 Threshold Aluminum 5"(127.0) Traction Tread
Plate / Rubber insert
3675A-E
$ 80.00 $ 262.49 Threshold Aluminum 5"(127.0) Traction Tread
Plate /Epoxy insert
3675A-EL
$ 106.13 $ 348.21 Threshold Aluminum 5"(127.0) Traction Tread
Plate /Epoxy / Photoluminescent Tread insert
3676A
$ 44.23 $ 145.15 Threshold Aluminum 6"(152.4) Traction Tread
Plate/Rubber / Photoluminescent Tread insert
3676A-E
$ 98.34 $ 322.65 Threshold Aluminum 6"(152.4) Traction Tread
Plate /Epoxy Insert
3676A-EL
$ 128.16 $ 420.49 Threshold Aluminum 6"(152.4) Traction Tread
Plate/Epoxy / Photoluminescent Tread insert
3676N
$ 2.94 $ 9.65 Replacement Gasket .24"X.175" Tread Rubber for
AluminumThresholds - Extrusion
3708AA
$ 28.21 $ 92.55 Gasketing Clear Anodized / Magnet / Sound Trap
3708N
$ 4.53 $ 14.85 Gasketing Closed Cell Neoprene, Black 1"(25.4) x 4"(10.2)
3709AA
$ 28.21 $ 92.55 Gasketing Clear Anodized / Neoprene / Sound Trap
3831A
$ 10.42 $ 34.17 Gasketing Aluminum / Double Neoprene
4000B
$ 10.90 $ 35.77 Weather Stripping Bronze Side Jamb without Return Flange
1 3/4"
4000Z
$ 2.93 $ 9.62 Weather Stripping Zinc Side Jamb without Return Flange 1 3/4"
5000B
$ 12.77 $ 41.90 Weather Stripping Bronze Side Jamb without Return Flange
5000Z
$ 4.07 $ 13.35 Weather Stripping Zinc Side Jamb without Return Flange
5831AA
$ 5.65 $ 18.53 Gasketing Clear Anodized / Silicone / PSA
5831FS-AA
$ 8.20 $ 26.89 Gasketing Clear Anodized / Silicone / Intumescent / PSA
5831D
$ 7.06 $ 23.16 Gasketing Dark Bronze Anodized / Silicone / PSA
5831FS-D
$ 9.80 $ 32.14 Gasketing Dark Bronze Anod./ Silicone Intumet/ PSA
5831G
$ 7.06 $ 23.16 Gasketing Gold Anodized / Silicone / PSA
5831FS-G
$ 9.80 $ 32.14 Gasketing Gold Anodized / Silicone / Intumescent / PSA
5831S-BK
$ 5.41 $ 17.76 Replacement Gasket .36" Wide Lip and Bulb Seal - Silicone - Black
5832AA
$ 5.81 $ 19.06 Gasketing Clear Anodized / Brush / PSA
5832FS-AA
$ 8.42 $ 27.63 Gasketing Clear Anodized / Poly Brush / Intumescent
/ PSA
5832D
$ 7.06 $ 23.16 Gasketing Dark Bonze Anodized / Poly Brush / PSA
5832FS-D
$ 9.80 $ 32.14 Gasketing Dark Bronze Anod./ Poly Brush/ Intumescent/
PSA
5832G
$ 7.06 $ 23.16 Gasketing Gold Anodized / Poly Brush / PSA
5832FS-G
$ 9.80 $ 32.14 Gasketing Gold Anodized / Poly Brush / Intumescent
5833AA
$ 5.65 $ 18.53 Gasketing Clear Anodized / Silicone / PSA
5833D
$ 7.06 $ 23.16 Gasketing Dark Bronze Anodized / Silicone / PSA
5833G
$ 7.06 $ 23.16 Gasketing Gold Anodized / Silicone / PSA
6570A
$ 29.35 $ 96.28 Threshold Aluminum Handicap 7"(177.8) x .500"(12.7)
6575A
$ 33.18 $ 108.85 Threshold AluminumThreshold 7.5" (190.5)
6710A
$ 42.27 $ 138.71 Threshold Aluminum Plate 10" (254.0)
7000B
$ 103.93 $ 340.99 Threshold Brass / Adj. Interlocking w/ #7336 or 7337
7332B
$ 51.99 $ 170.61 Threshold Brass / Interlocking - Extension Leg
7334B
$ 104.01 $ 341.25 Threshold Brass / Adjustable Interlocking 4" (101.6)
7335B
$ 130.01 $ 426.55 Threshold Brass / Adjustable Interlocking 5"(127)
7336B
$ 207.94 $ 682.27 Threshold Brass / Adjustable interlocking 6.2" (157.5)
15
Price Book 3
Effective August 12, 2017 • Rev. 08/17
PART
NUMBER
LIST PRICE
PER FOOT
LIST PRICE
PER METER TYPE DESCRIPTION
7337B
$ 233.94 $ 767.58 Threshold Brass / Adjustable interlocking 7.2" (182.9)
7350A
$ 71.81 each 12"-18" (305-457) Aluminum / Mortised Automatic Door Bottom
for Sliding Doors
$ 54.28 each 18 1/8"-36" (460-914)
$ 57.83 each 36 1/8"-48" (917-1219)
$ 72.25 each 48 1/8"-54" (1222-1371)
$ 90.39 each 54 1/8"-60" (1375-1524)
7770AA
$ 28.14 $ 92.32 Gasketing Clear Anodized, Adjustable Sound Seal
7770D
$ 35.94 $ 117.90 Gasketing Dark Bronze Anod., Adjustable Sound Seal
7770G
$ 35.94 $ 117.90 Gasketing Gold Anodized, Adjustable Sound Seal
7770N
$ 2.80 $ 9.21 Replacement Gasket .32" Wide Elongated Bulb Seal - Neoprene
8004N
$ 2.07 $ 6.78 Gasketing Neoprene Kerf Seal
8042S-BK
$ 1.67 $ 5.46 Gasketing Silicone Kerf Seal / Black / PSA
8043N
$ 2.35 $ 7.69 Gasketing Neoprene Kerf Seal / Black
8047R
$ 4.33 $ 14.20 Gasketing Rubber Seal for overhead door
8048S-BK
$ 2.00 $ 6.59 Gasketing Silicone Kerf Seal / Black
8052N
$ 2.00 $ 6.59 Gasketing Kerf Sponge Seal
8053Q-BR
$ 2.13 $ 6.98 Gasketing Kerf Foam Seal, Brown
8053Q-WH
$ 2.13 $ 6.98 Gasketing Kerf Foam Seal, White
8054S-BK
$ 2.67 $ 8.74 Gasketing Kerf Pressure Seal, Silicone Black ø .250"
8054S-WH
$ 2.67 $ 8.74 Gasketing Kerf Pressure Seal, Silicone White ø .250"
8055S-BK
$ 3.15 $ 10.35 Gasketing Kerf Pressure Seal, Silicone Black ø .375"
8056S-WH
$ 3.15 $ 10.35 Gasketing Kerf Pressure Seal, Silicone White ø .438"
8136
$ 7.54 $ 24.72 Meeting Stile Polycarbornate Seal / Brush .394"(10)
8136P-GY
$ 1.98 $ 6.52 Replacement Gasket .188" x .250 Woven Pile with Fin - Gray
8137
$ 7.66 $ 25.12 Meeting Stile Polycarbornate Seal / Brush .472"(12)
8138
$ 8.78 $ 28.83 Meeting Stile Polycarbornate Seal / Brush .590"(15)
8144S-BK
$ 2.87 $ 9.41 Gasketing Silicone / Batwing Type / Black / PSA
8144S-WH
$ 2.87 $ 9.41 Gasketing Silicone / Batwing Type / White / PSA
8144FS
$ 3.89 $ 12.75 Gasketing Intumescent Batwing Type Seal / PSA
8145S-BK
$ 1.82 $ 5.99 Gasketing Silicone / Black / PSA
8149AA
$ 6.34 $ 20.79 Gasketing Clear Anodized / Brush / Mortised
8150S-BK
$ 2.13 $ 7.00 Gasketing Silicone, black, PSA
8151AA
$ 6.55 $ 21.80 Door Sweep Aluminum / Neoprene
8172N
$ 1.07 $ 3.50 Replacement Gasket Neoprene/ PSA .250"(6.4) x .125"(3.2) -
Minimum order 75'(22.8M) Roll UOM
8191AA
$ 6.29 $ 20.66 Gasketing Clear Anodized / Neoprene
8191D
$ 8.63 $ 28.31 Gasketing Dark Bronze Anodized / Neoprene
8191G
$ 8.63 $ 28.31 Gasketing Gold Anodized / Neoprene
8192AA
$ 4.85 $ 15.90 Door Sweep Clear Anodized / .625" long Brush
8192AA-PSA
$ 6.27 $ 20.57 Meeting Stile Clear Anodized / Brush / Adhesive
8192D
$ 6.70 $ 21.98 Door Sweep Dark Bronze Anodized / .625" long Brush
8192D-PSA
$ 7.29 $ 23.91 Meeting Stile Dark Bronze Anodized / Brush / Adhesive
8192P
$ 4.06 $ 13.33 Door Sweep Replacement Pile only, for #8192 & 8198
8193AA
$ 4.56 $ 14.97 Door Sweep Clear Anodized / .375" long Brush
8193AA-PSA
$ 5.99 $ 19.64 Meeting Stile Clear Anodized / .375" Brush / Adhesive
8193D
$ 5.63 $ 18.46 Door Sweep Dark Bronze Anodized / .375" long Brush
8193D-PSA
$ 7.12 $ 23.34 Meeting Stile Dark Bronze Anod./ .375" Brush / Adhesive
8193P
$ 3.13 $ 10.28 Replacement Gasket Replacement Pile Brush for 8193
8194AA
$ 4.56 $ 14.97 Door Sweep Clear Anodized / Neoprene Lip
8194AA-PSA
$ 5.99 $ 19.64 Meeting Stile Clear Anodized / Neoprene Lip/ Adhesive
8194D
$ 5.63 $ 18.46 Door Sweep Dark Bronze Anodized / Neoprene Lip
8194D-PSA
$ 7.12 $ 23.34 Meeting Stile Dark Bronze Anod./ Neoprene Lip/ Adhesive
8194N
$ 2.47 $ 8.11 Replacement Gasket .53" Long Lip Seal - EPDM
8195AA
$ 5.65 $ 18.53 Meeting Stile Clear Anodized / Neoprene Lip
8195AA-PSA
$ 7.41 $ 24.30 Meeting Stile Clear Anodized / Neoprene Lip / Adhesive
8197AA
$ 6.06 $ 19.89 Door Sweep Clear Anodized Drip Cap / Neoprene
8197D
$ 8.31 $ 27.27 Door Sweep Dark Bronze Anodized Drip Cap / Neoprene
8197G
$ 8.31 $ 27.27 Door Sweep Gold Anodized Drip Cap / Neoprene
8197N
$ 4.11 $ 13.48 Replacement Gasket 1.063" Tapered Lip Seal - EPDM
8198AA
$ 6.29 $ 20.66 Door Sweep Clear Anodized Drip Cap / Brush Seal
8198D
$ 8.63 $ 28.31 Door Sweep Dark Bronze Anodized Drip Cap / Brush
8198G
$ 8.63 $ 28.31 Door Sweep Gold AnodizedRain Drip / Brush
8198P
$ 4.47 $ 14.69 Replacement Gasket .625" Nylon Brush
8216S-BK
$ 1.49 $ 4.68 Weather Stripping Pressure seal, silicone, black, PSA
8217S-BK
$ 1.49 $ 4.68 Meeting Stile Silicone lips, black, PSA
8302AA
$ 3.10 $ 10.18 Gasketing Clear Anodized & Neoprene Seal
8302D
$ 4.98 $ 16.35 Gasketing Dark Bronze Anodized & Neoprene Seal
8302N
$ 2.11 $ 6.93 Replacement Gasket 45 Degree LEG Seal - Neoprene
8303AA
$ 3.10 $ 10.18 Gasketing Clear Anodized & Neoprene Seal
8303D
$ 4.98 $ 16.35 Gasketing Dark Bronze Anodized & Neoprene Seal
PART
NUMBER
LIST PRICE
PER FOOT
LIST PRICE
PER METER TYPE DESCRIPTION
8303S-BK
$ 1.50 $ 4.94 Replacement Gasket 1/4" Bulb Seal-Silicone
8305AA
$ 4.06 $ 13.31 Gasketing Clear Anodized with Brush
8305D
$ 6.51 $ 21.38 Gasketing Dark Bronze Anodized with Brush
8306AA
$ 4.06 $ 13.31 Gasketing Clear Anodized with Neoprene
8306D
$ 6.51 $ 21.38 Gasketing Dark Bronze Anodized with Neoprene
8353N
$ 3.51 $ 11.52 Replacement Gasket .469" Wide Open Bulb Seal-Neoprene
8361Key
$ 3.45 each General Locking Key for Automatic Door Bottom
8452A
$ 15.42 $ 50.58 Threshold Wheel Chair ShowerThreshold
8452N
$ 6.74 $ 22.13 Replacement Gasket 2" WideThreshold Seal-EPDM Rubber
8557S-BK
$ 3.92 $ 12.86 Replacement Gasket Silicone Double Lip Seal W/ Compressive Bulb
8655A
$ 11.27 $ 37.00 Threshold Aluminum HandicapThreshold 5"(127)
8724A
$ 24.56 $ 80.58 Threshold Aluminum 5 5/8"(142.9). Thermal Break
8726A
$ 29.71 $ 97.47 Threshold Aluminum 7 5/8"(193.7). Thermal Break
8729A
$ 33.11 $ 108.63 Threshold Aluminum 6 5/8"(168.3). Thermal
Break/Neoprene.
8770N
$ 2.37 $ 7.79 Replacement Gasket Neoprene / PSA .500"(12.7) x .125"(3.2) ,
minimum order 75Ft.(22.8M), order in UOM
8780N
$ 2.44 $ 8.02 Replacement Gasket Neoprene / PSA 1"(25.4) x .094"(2.4),
minimum order 75Ft.(22.8M), order in UOM
8800S-BK
$ 2.73 $ 8.97 Gasketing Silicone Black Kerf Seal
8800S-WH
$ 2.73 $ 8.97 Gasketing Silicone White Kerf Seal
8810S-BK
$ 2.35 $ 7.69 Gasketing SIlicone Black Kerf Seal
8810S-WH
$ 2.35 $ 7.69 Gasketing Silicone White Kerf Seal
8841R
$ 2.00 $ 6.59 Gasketing Kerf Seal rubber, black
8877AA
$ 5.88 $ 19.28 Gasketing Clear Anodized / Neoprene Seal
8878AA
$ 5.65 $ 18.53 Gasketing Clear Anodized / Silicone Seal
8878BIO-BR
$ 2.37 $ 7.79 Replacement Gasket .36" Wide Snap-on Cover-Silicone-BIO
8878N-BK
$ 1.12 $ 3.69 Replacement Gasket .36" Wide Snap-on Cover - EPDM Rubber
8879AA
$ 6.36 $ 20.86 Gasketing Clear Anodized / Brush Seal
8879AA-PSA
$ 7.15 $ 23.45 Meeting Stile Clear Anodized / Brush Seal / Adhesive
8880AA
$ 11.33 $ 37.16 Gasketing Clear Anodized frame, acoustical
8880D
$ 13.61 $ 44.63 Gasketing Dark Bronze Anodized frame, acoustical
9131-PSA
$ 4.65 $ 15.27 Weathe Stripping PVC Bumper, PSA, .750"x.188"
9137-PSA
$ 11.62 $ 38.12 Weather Stripping PVC/Neoprene for Sliding Glass Doors
9137S-CL
$ 4.52 $ 14.83 Replacement Gasket .906" Tall Silicone Lip Seal
9495Tape
$ 0.16 $ 0.51 General 3M Double-coated Clear Tape - .250" wide -
540' (164.6M) Roll Minimum Order and UOM
2250375PSA
$ 3.42 $ 11.24 Intumescent FS2002 Intumet 1/4"(6.4) x 3/8"(9.5)
30622000PSA
$ 4.15 $ 13.61 Intumescent FS3003 Intumet 1/16" (1.6) x 2" (50.8)
3125375PSA
$ 1.94 $ 6.35 Intumescent FS3003 Intumet 1/8" (3.2) x 3/8" (9.5)
3125500PSA
$ 2.61 $ 8.54 Intumescent FS3003 Intumet 1/8" (3.2) x 1/2" (12.7)
3125625PSA
$ 3.15 $ 10.33 Intumescent FS3003 Intumet 1/8" (3.2) x 5/8" (15.9)
31252000PSA
$ 6.23 $ 20.42 Intumescent FS3003 Intumet 1/8" (3.2) x 2" (50.8)
3250375PSA
$ 3.42 $ 11.24 Intumescent FS3003 Intumet 1/4" (6.4) x 3/8" (9.5)
3250500PSA
$ 4.15 $ 13.61 Intumescent FS3003 Intumet 1/4"(6.4) x 1/2" (12.7)
3250750PSA
$ 5.50 $ 18.04 Intumescent FS3003 Intumet 1/4" (6.4) x 3/4" (19.1)
32501000PSA
$ 6.83 $ 22.39 Intumescent FS3003 Intumet 1/4" (6.4) x 1" (25.4)
32502000PSA
$ 10.25 $ 33.62 Intumescent FS3003 Intumet 1/4" (6.4) x 2" (50.8)
4062375PSA
$ 1.41 $ 4.62 Intumescent FS4004 Intumet 1/16" (1.6) x 3/8" (9.5)
4062500PSA
$ 1.49 $ 4.89 Intumescent FS4004 Intumet 1/16"(1.6) x 1/2"(12.7)
4062750PSA
$ 1.94 $ 6.35 Intumescent FS4004 Intumet 1/16"(1.6) x 3/4"(19.1)
40621000PSA
$ 2.61 $ 8.54 Intumescent FS4004 Intumet 1/16" (1.6) x 1" (25.4)
42501000PSA
$ 6.83 $ 22.39 Intumescent FS4004 Intumet 1/4" (6.4) x 1" (25.4)
42502000PSA
$ 10.25 $ 33.62 Intumescent FS4004 Intumet 1/4" (6.4) x 2" (50.8)
PAN-Z
$ 3.74 $ 11.82 General Optional Zinc Pan forThreshold 175
STC3003X062
$ 4.34 / sqft. Intumescent Sound Sheet 12"(304.8)x 1/16"(1.6). 19 STC
STC3003X125
$ 5.78 / sqft. Intumescent Sound Sheet 12"(304.8)x 1/8"(3.2). 24 STC
STC3003X250
$ 10.13 / sqft. Intumescent Sound Sheet 12"(304.8)x 1/4"(6.4)
STC3003X375
$ 14.47 / sqft. Intumescent Sound Sheet 12"(304.8)x 3/8"(9.5)
Z49
$ 12.42 /set (2) General Steel Holding Plates for Auto. Door Bottom
Z49AA
$ 12.42 /set (2) General Aluminum Holding Plates for Auto. Dr. Bottom
Z950
$ 205.52 each Cam Lift Hinge Stainless Steel Cam Lift - Handed -
(32D)5"(127) x 4.5"(114.3) x .250"(6.4)
Z953
$ 133.62 each Cam Lift Hinge Stainless Steel Cam Lift- Handed - (32D)
5"(127) x 4.5"(114.3) x .180"(4.6)
Z955
$ 109.62 each Cam Lift Hinge Stainless Steel Cam Lift - Handed - (32D)
4.5"(114.3) x 4.5"(114.3) x .134"(3.4)
Z9500
$ 228.49 each Cam Lift Hinge Stainless Steel Cam Lift - Handed (32D)
5"(127) x 4.5"(114.3) x .250"(6.4)
Price Book 3
Effective August 12, 2017 • Rev. 08/17
16
STANDARD SCREWS DRIVE SCREWS
EXPANSION SHIELD / ANCHORS
NAILS
APPLICATIONS:
For Head and Jamb
For Threshold
For Threshold
For Astragals
For Hinges (#Z950 type)
For Hinges (#Z955 type)
MEMBER MEMBER
LIST PRICE
#7201Z #6 x 3/4" Pan Phillips Head Self-drilling Zinc Plated $ 0.18 /ea.
#7201BK #6 x 3/4" Pan Phillips Head Self-drilling Black Oxide $ 0.21 /ea.
LIST PRICE
#7203Z #10 x 1-1/4" Flat Phillips Head Sheet Metal Screw Zinc Plated $ 0.48 /ea.
#7203BK #10 x 1-1/4" Flat Phillips Head Sheet Metal Screw Black Oxide $ 0.55 /ea.
LIST PRICE
#7233Z #10 x 1-1/4" Flat Phillips Head Wood Screw Zinc Plated $ 0.51 /ea.
#7233B #10 x 1-1/4" Flat Phillips Head Wood Screw Brass Material $ 0.91 /ea.
LIST PRICE
#7244Z 1/4-20 x 1" Flat Phillips Head Machine Screw Zinc Plated $ 2.37 /ea.
#7245Z 1/4-20 x 1-1/2" Flat Head Sleeve Bolt Zinc Plated $ 2.56 /ea.
LIST PRICE
#7249Z #10 x 3/4" Pan Phillips Head Self-drilling Zinc Plated $ 0.69 /ea.
#7249BK #10 x 3/4" Pan Phillips Head Self-drilling Black Oxide $ 0.75 /ea.
LIST PRICE
#7241Z #12 x 11/16" Flat Undercut Phillips Head Self-drilling Zinc Plated $ 0.61 /ea.
LIST PRICE
#7250ST #12-24 x 3/4" Flat Phillips Head, Type F Machine Screw Stainless Steel $ 1.03 /ea.
LIST PRICE
#7255ST #12-24 x 3/4" Flat Phillips Head, Type F Machine Screw Stainless Steel $ 1.03 /ea.
LIST PRICE
#221 - Plastic Shield with #10 x 1-1/4" (or 1-1/2", 1-3/4") Flat Phillips SMS $ 0.66 /ea.
LIST PRICE
#222 - Lead Shield with #10 x 1-1/4" (or 1-1/2", 1-3/4") Flat Phillips SMS $ 0.67 /ea.
LIST PRICE
#223 - MSLA-10 Anchor with #10-24 x 1-1/2" Flat Phillips Machine Screw $ 1.56 /ea.
LIST PRICE
#224 - MSLA-4 Anchor with #1-4-20 x 1-1/2" Flat Phillips Machine Screw $ 1.56 /ea.
LIST PRICE
#226 Stainless Steel Sleeve Anchor $ 4.74 /ea.
LIST PRICE
#4 5/16" (7.9) Waferhead Plated $ 0.16 /ea.
#4 5/16" (7.9) Waferhead Stainless Steel $ 0.29 /ea.
#16 7/8" (22.2) Zinc Plated Flathead Steel Nail $ 33.18 /lb.
#16 7/8"(22.2) Copper Plated Flathead Nail $ 33.18 /lb.
(Note: 1 lb. contains ~1300 pcs. Minimum order 1lb. )
SECURITY SCREWS
Torx Screws are available upon request. CALL for price
www.zerointernational.com
OPTIONAL EXTRAS
Zero International - Custom Bulkhead Template
K
G
No jamb cut out.
No jamb cut out.
F E
H
C
B
D
A
Company Name: _______________________________________________________________________________________________________________________________________
Contact: ________________________________________________________________________________________________________________________________________________
Phone: __________________________________________________________________________________________________________________________________________________
Email: ___________________________________________________________________________________________________________________________________________________
Purchase Order #: ______________________________________________________________________________________________________________________________________
Email to: Zero Customer.Support@Allegion.com or Fax to: (800)851-0000
Please complete Qty.
Product Desc. Qty.
669A Aluminum
669S Steel
669STST Stainless
Please complete dimensions in inches or mm.
Must complete A-E, F-K optional if required.
Dimension Inches " MM
Rectangular - No jamb cut outs
A
minimum
dimension 1"
B
C
D
Can only be
1" greater
than A
E
Jamb Cut Outs
F
G
H
K
© 2017 Allegion
010962, Rev. 08/17
allegion.com/us
Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security.
As a$2 billion provider of security solutions for homes and businesses, Allegion
employs more than 7,800 people and sells products in more than 120 countries
across the world. Allegion comprises 23 global brands, including strategic
brands CISA®
, Interflex®
, LCN®
, Schlage® and Von Duprin®
.
For more, visit www.allegion.com
About Allegion

Navigation menu