Zhejiang Dahua Vision Technology DH-IPC-AX2 CONSUMER CAMERA User Manual

Zhejiang Dahua Vision Technology Co., Ltd CONSUMER CAMERA Users Manual

Contents

User Manual -1

Download: Zhejiang Dahua Vision Technology DH-IPC-AX2 CONSUMER CAMERA User Manual
Mirror Download [FCC.gov]Zhejiang Dahua Vision Technology DH-IPC-AX2 CONSUMER CAMERA User Manual
Document ID3769900
Application IDh6tX8ChiRRZ7RM1z2ajo0g==
Document DescriptionUser Manual -1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize44.12kB (551520 bits)
Date Submitted2018-03-05 00:00:00
Date Available2018-03-05 00:00:00
Creation Date2018-02-13 11:24:45
Producing SoftwareMicrosoft® Word 2013
Document Lastmod2018-02-13 11:24:45
Document TitleUsers Manual
Document CreatorMicrosoft® Word 2013
Document Author: Merry

Dahua A Series Wi-Fi PT Camera Quick Start Guide
CONSUMER CAMERA
Quick Start Guide
Version 1.0.0
ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.
Dahua A Series Wi-Fi PT Camera Quick Start Guide
1 Packing List
Device × 1
Power Adapter ×1
Quick Installation Board ×1
QSG ×1
Screw Package ×1
USB ×1
Dahua A Series Wi-Fi PT Camera Quick Start Guide
Installation Position Map ×1
Dahua A Series Wi-Fi PT Camera Quick Start Guide
2 Product Appearance
Figure 2-1
Figure 2-2
Dahua A Series Wi-Fi PT Camera Quick Start Guide
Figure 2-3
Please refer to the following table for more details about each port.
SN
Port Name
USB power port
Reset/WPS button
Speaker
Lens
MIC
Indicator light
Table 2-1
Note
For reset, long press for 8 seconds and then the light off; For WPS (Wi-Fi Protected
Setup), one quick press.
Please refer to the following table for more details about status of indicator light.
Indicator light status
Device status
Red light stably on
Booting
Booting completed, await Wi-Fi config, enter smart config
Green light slow flashing
status;
Wi-Fi smart config in progress, including WPS (Wi-Fi
Green light quick flashing
Protected Setup), management frame, etc.
Green light stably on
Wi-Fi connection succeeded, operate normally.
Red and green lights flash
Device upgrade
alternately
Red light slow flashing
Network disconnection
Red light quick flashing
Device fail to boot up; SD card does not work
Table 2-2
Dahua A Series Wi-Fi PT Camera Quick Start Guide
3 Operation by Easy4ip App
Step 1 Power on your camera with power adapter.
Step 2 Connect your smartphone to your Wi-Fi network, scan “Easy4ip” QR on the
packing box, download and install “Easy4ip” APP.
Step 3 Open Easy4ip APP (take iOS version as an example), see Figure 3-1. Please
register an account for first use.
Figure 3-1
Step 4 Please tap “+” to add new devices after you login your account.
Dahua A Series Wi-Fi PT Camera Quick Start Guide
Figure 3-2
Step 5 Scan the QR code on the back of the camera to get the SN, you can also tap
"Manually enter the SN" and manually input the SN number on the next page.
Then tap "Next".
Dahua A Series Wi-Fi PT Camera Quick Start Guide
Figure 3-3
Step 6 Make sure your smartphone is connected to the same Wi-Fi, then tap "Next'.
Figure 3-4
Step 7 Fill in the password of your Wi-Fi, then tap "Next".
Dahua A Series Wi-Fi PT Camera Quick Start Guide
Figure 3-5
Step 8 Input your device password, the default password is "admin".
Figure 3-6
Step 9 Your camera is successfully added. You can set up your time zone and start
preview.
Dahua A Series Wi-Fi PT Camera Quick Start Guide
Figure 3-7
Note
If you have more cameras, please follow step 4-9 to add them one by one.
If you want to change the Wi-Fi signal, please reset the camera to factory default and
repeat step 4-9 to add the device.
10
Dahua A Series Wi-Fi PT Camera Quick Start Guide
4 Device Installation
Note
Please make sure the installation surface can min support the 3X weight of the camera
and the bracket.
Figure 4-1
Step 1 Dig holes on the proper mounting surface ① according to the hole sites of quick
installation board.
Step 2 Knock the expansion bolts ② into the holes.
Step 3 Use self-tapping screws ④ to install quick installation board ③ and fix it well.
Step 4 Connect to device power.
Step 5 Adjust the device monitoring angle and stick the device ⑤ on the quick
installation board.
Disclaimer





This quick start guide is for reference only. Minor difference might be found in user
interface.
All the designs and software here are subject to change without prior written notice.
All trademarks and registered trademarks mentioned are the properties of their
respective owners.
Please visit our website or contact your local service engineer for more information.
If there is any uncertainty or controversy, please refer to our final explanation.
11
Dahua A Series Wi-Fi PT Camera Quick Start Guide
ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.
Address: No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China
Postcode: 310053
Tel: +86-571-87688883
Fax: +86-571-87688815
Email:consumer@global.dahuatech.com
Website: www.dahuaconsumer.com
12

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 12
Language                        : en-US
Tagged PDF                      : Yes
Title                           : F Series Indoor IP Camera Quick Start Guide
Author                          : Merry
Creator                         : Microsoft® Word 2013
Create Date                     : 2018:02:13 11:24:45+08:00
Modify Date                     : 2018:02:13 11:24:45+08:00
Producer                        : Microsoft® Word 2013
EXIF Metadata provided by EXIF.tools
FCC ID Filing: SVNDH-IPC-AX2

Navigation menu