Zhejiang Dahua Vision Technology DH-IPC-CX2Y CONSUMER CAMERA User Manual

Zhejiang Dahua Vision Technology Co., Ltd CONSUMER CAMERA Users Manual

User Manual

Dahua C Series Wi-Fi Camera Quick Start Guide Dahua C Series Wi-Fi Camera Quick Start Guide Version 1.0.0 ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.
Dahua C Series Wi-Fi Camera Quick Start Guide 2 1 Packing List Device × 1 QSG ×1 Power Adapter ×1 Screw Package ×1 Quick Installation Board ×1 USB ×1
Dahua C Series Wi-Fi Camera Quick Start Guide 3 Installation Position Map ×1
Dahua C Series Wi-Fi Camera Quick Start Guide 4 2 Product Appearance Figure 2-1 Figure 2-2
Dahua C Series Wi-Fi Camera Quick Start Guide 5 Figure 2-3 Please refer to the following table for more details about each port. Table 2-1 Note For reset, long press for 10 seconds and then the light off; For WPS (Wi-Fi Protected Setup), one quick press. Please refer to the following table for more details about status of indicator light. Table 2-2 No. Component Name 1 Lens 2 MIC 3 Indicator light 4 SD card slot 5 Speaker 6 Reset/ WPS (Wi-Fi–Protected Setup) button 7 USB port Indicator light status Device status Red light stably on Booting. Green light slow flashing Booting completed, await Wi-Fi config, and enter smart config status. Green light quick flashing Wi-Fi smart config in progress, including WPS (Wi-Fi Protected Setup), management frame, etc. Green light stably on Wi-Fi connection succeeded, operate normally. Red and green lights flash alternately Device upgrade. Red light slow flashing Network disconnection. Red light quick flashing Device fails to boot up; SD card does not work.
Dahua C Series Wi-Fi Camera Quick Start Guide 6 3 Operation by Easy4ip App Step 1 Power on your camera with power adapter. Step 2 Connect your smartphone to your Wi-Fi network, scan “Easy4ip” QR on the packing box, download and install “Easy4ip” APP. Step 3 Open Easy4ip APP (take iOS version as an example), see Figure 3-1. Please register an account for first use. Figure 3-1 Step 4 Please tap “+” to add new devices after you login your account.
Dahua C Series Wi-Fi Camera Quick Start Guide 7 Figure 3-2 Step 5 Scan the QR code on the back of the camera to get the SN, you can also tap "Manually enter the SN" and manually input the SN number on the next page. Then tap "Next".
Dahua C Series Wi-Fi Camera Quick Start Guide 8 Figure 3-3 Step 6 Make sure your smartphone is connected to the same Wi-Fi, then tap "Next'. Figure 3-4 Step 7 Fill in the password of your Wi-Fi, then tap "Next".
Dahua C Series Wi-Fi Camera Quick Start Guide 9 Figure 3-5 Step 8 Input your device password, the default password is "admin". Figure 3-6 Step 9 Your camera is successfully added. You can set up your time zone and start preview.
Dahua C Series Wi-Fi Camera Quick Start Guide 10 Figure 3-7 Note If you have more cameras, please follow step 4-9 to add them one by one. If you want to change the Wi-Fi signal, please reset the camera to factory default and repeat step 4-9 to add the device.
Dahua C Series Wi-Fi Camera Quick Start Guide 11 4 Device Installation Note Please make sure the installation surface can min support the 3X weight of the camera and the bracket. Figure 4-1 Step 1 Dig holes on the proper mounting surface according to the hole sites of quick installation board. Step 2 Knock expansion bolts into the holes. Step 3 Use self-tapping screws to install the quick installation board and fix it well. Step 4 Connect the device to power. Step 5 Adjust device monitoring angle and stick the device on the quick installation board. Disclaimer  This quick start guide is for reference only. Minor difference might be found in user interface.  All the designs and software here are subject to change without prior written notice.  All trademarks and registered trademarks mentioned are the properties of their respective owners.  Please visit our website or contact your local service engineer for more information.  If there is any uncertainty or controversy, please refer to our final explanation.
Dahua C Series Wi-Fi Camera Quick Start Guide 12 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. Address: No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China Postcode: 310053 Tel: +86-571-87688883 Fax: +86-571-87688815 Email: consumer@global.dahuatech.com Website: www.dahuaconsumer.com

Navigation menu