Zhejiang Dahua Vision Technology DH-IPC-KX6 CONSUMER CAMERA User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3484119
Application ID	dC/jzBfVnuxaACccdjnQ4A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	132.52kB (1656516 bits)
Date Submitted	2017-07-27 00:00:00
Date Available	2017-07-27 00:00:00
Creation Date	2017-07-14 10:05:27
Producing Software	GPL Ghostscript 8.64
Document Lastmod	2017-07-14 02:05:29
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Amy-D_Wang

Dahua K Series Cube Network Camera Quick Start Guide
V 1.0.0
Dahua Technology CO., LTD
1 Packing List
Device × 1
Power Adapter ×1
QSG ×1
Screw Package ×1
Installation Position Map ×1
2 Product Appearance
Figure 2-1
Figure 2-2
Figure 2-3
Please refer to the following sheet for more details about each port.
SN
Name
Network port
Reset/WPS button
Digital input/output
Power port
Built-in speaker
6
Micro SD card slot
Indicator light
Built-in MIC
IR LED
10
PIR
Sheet 2-1
Note:
For reset, long press for 8 seconds and then the light off; For WPS, one quick press.
Please refer to the following sheet for more details about status of indicator light.
Indicator light status
Device status
Red light normally on
Booting
Green light slow flashing
Booting completed, await wifi config, enter smart
config status;
Wifi smart config in progress, including WPS,
management frame and etc.
Wifi connection succeeded, operate normally.
Green light quick flashing
Green light normally on
Red and green lights flash
alternately
Red light slow flashing
Red light quick flashing
Device upgrade
Network connection failure or disconnection after
network connection success.
Device malfunction, fail to boot up; alarm or SD card
malfunction
Sheet 2-2
3 Operate by Easy4ip APP
1. Power on the device with power adapter.
2. Connect your smart phone to your WiFi network. Scan the “Easy4ip APP” QR on the packing box,
download and install the Easy4ip APP.
APP
3. Open Easy4ip APP (take IOS as an example), tap login to login the APP,, see Figure 3-1.
Figure 3-1
4. Tap “register” for first use.
Figure 3-2
5. Tap “+” to add devices.
Figure 3-3
6. Choose “Wireless”.
Figure 3-4
7. Name the camera and scan the QR code on camera.
Figure 3-5
8. Input the Wi-Fi password.
Figure 3-6
9. Waiting for 60s to finish the Wi-Fi connection.
Figure 3-7
Note: If you want to change the Wi-Fi signal, please reset the camera to factory default and repeat
step 6-9;
Figure 3-8
4 Operate by DMSS APP
Step 1
Power on the camera.
Step 2
Connect iphone to a WiFi signal.
Step 3
Open DMSS (downloaded from APP Store), choose Device Manager.
Figure 4-1
Step 4
Click “+”.
Figure 4-2
Step 5
Choose “WiFi configuration”.
Figure 4-3
Step 6
Input a device name and scan the QR code on camera, then “next”.
10
Figure 4-4
Step 7
Input the WiFi password, then “next”.
Figure 4-5
Step 8
Connection succeeds.
11
Figure 4-6
Figure 4-7
47
Figure 4-8
Note:
Please try again or check the WiFi password if it failed.
The WiFi configuration will be closed if activating
activat
WPS function, Please reset the device if you still
need to configure WiFi via DMSS App.
12
5 Device Installation4
Installation4 Network Configuration
The IP address of all the cameras is the same when leaving factory (default IP 192.168.1.108). To
make the camera access to the network smoothly, please plan the available IP segment reasonably
according to the actual network environment.
NOTE:
The camera can be configured only when the IP addresses of the camera and the computer are in the
same network segment.
Step 1
Power on the device with power adapter,Connect the device to computer.
Step 2
Double click the “smart cms.exe”，The user name and password are admin and admin .
Shown in Figure 4-1.
Figure 4-1
Step 3
Click
, and then click
to enter the interface where you can find IP
address.Shown in figure 4-2.
Input your username and password (Default username is admin and password is admin respectively).
Figure 4-2
13
Step 4
Click
the main interface.
,and double click the default IP, See Error! Reference source not found. for
Error! Reference source not found.
Dahua A Series HD Wi-Fi Network Camera
Quick Start Guide
14
6
Important
Please make sure the installation surface can min support the 3X weight of the camera and the
bracket.
Figure 5-1
Step 1
Paste the installation map on the installation surface such as wall, ceiling or the wood.
Step 2
Dig holes in the installation surface according to the installation map.
Step 3
Insert the expansion bolts from the accessories bag to the holes you just dug. If it is the wood surface
you can skip to the next step.
Step 4
Fix the device with screw in the accessories bag.
Step 5
Connect the cable and then boot up the device.
Step 6
Loosen the adjust knob for a little bit, adjust the camera to proper surveillance position according to
your practical requirements.
Step 7
Secure the knob of the bracket to fix the camera.
15
7
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Attention that changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This product has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This product generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this product does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the
radiator and your body
Dahua Technology Co., Ltd
Address：No.1199 Bin’an Road, Binjiang District, Hangzhou, PRC.
Postcode: 310053
Tel: +86-571-87688883
Fax: +86-571-87688815
Email:overseas@dahuatech.com
Website: www.dahuasecurity.com
16

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
Page Count                      : 17
Create Date                     : 2017:07:14 10:05:27+08:00
Title                           : <4D6963726F736F667420576F7264202D204448332E303330355F31333057203330305720B4F85749464920CDF8BFDABFA8C6ACBBFACFEEC4BF5FB4F3BBAAB0E6B1BECBB5C3F7CAE92E646F6378>
Producer                        : GPL Ghostscript 8.64
Author                          : Amy-D_Wang
Creator                         : PScript5.dll Version 5.2.2
Modify Date                     : 2017:07:14 02:05:29Z

EXIF Metadata provided by EXIF.tools